CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
IMPORTANT!
Click to expand...
Click to collapse
* PLEASE READ THE ENTIRE TOPIC BEFORE FLASHING THE ROM.
Bug Reports
Click to expand...
Click to collapse
* REPORT BUGS IN THE TOPIC ONLY.
* DON'T SEND ME PM MESSAGES ABOUT BUGS OR FEATURE REQUESTS.
* ONLY REPORT THE BUGS IN CM11. I DON'T PROVIDE SUPPORT FOR OTHER ROMS. POST IN THEIR RESPECTIVE THREADS.
* IF YOU ARE ON A CUSTOM KERNEL, FIRST CHECK WITH THE STOCK KERNEL AND THEN REPORT THE BUG.
Downloads
Click to expand...
Click to collapse
ROM Downloads
Google Apps
Download the Pico Modular Package to save space on the system partition.
Changelog
Click to expand...
Click to collapse
20160705
Android Security patch level - 1st June 2016
20160421
Android Security patch level - 1st April 2016
Improved multitasking ability
Upstream Changes.
20150713
Upstream changes.
20141008
Upstream changes.
20140902
Updated to 4.4.4
Pull in changes from NamelessROM
Improved Video Recording
Fixed media playback issues.
20140513
Upstream Changes
20140507
Upstream changes.
20140423
Fixed front camera recording issues.
Upstream Changes.
20140324
Optimized CPU speed when screen off
Bluetooth HID support
Upstream updates.
20140318
Fixed issues with Audio and Media Playback
Upstream changes.
20140309
Upstream changes.
20140222
Upstream changes.
20140209
Bought back battery changes from 20140120 build
Fixed Compass
Fixed media playback.
Upstream changes.
20140128
Upstream changes.
20140124
Reverted battery driver changes.
Upstream changes.
20140120
Fixed Battery Drain
Fixed WiFI Tethering
Installation Instructions
Click to expand...
Click to collapse
IMPORTANT! READ BEFORE FLASHING!
1. If you flash this ROM from Stock ROM, it will wipe data due to different partitioning. The device would reboot while flashing and resume again.
2. Once on this ROM, the most effective way of going back to any other ROM would be to repartition from Odin.
3. While converting the filesystem, your efs that has your IMEI is backed up to /emmc/backup/efs. Keep a backup on your PC just in case.
4. Incase if you don't get a network signal, check if your IMEI and Baseband are proper. If not, go back to stock and try again.
5. Do NOT use Odin to flash Modems. Due to different partitions, Odin will screw up your existing MTD setup.
Stock ROM
1. Flash CWM Compatible Kernel (CF ROOT)
2. Reboot to Recovery.
3. Wipe Data / Factory Reset.
4. Select the ROM zip from your SD Card and flash.
5. The device will reboot and finish flashing.
6. Reboot to Recovery Again.
7. Flash Google Apps.
8. Reboot
Any other AOSP ROM (CM7/MIUI/CM9)
1. Reboot to Recovery.
3. Wipe Data / Factory Reset.
4. Select the ROM zip from your SD Card and flash.
5. The device will reboot and finish flashing.
6. Reboot to Recovery Again.
7. Flash Google Apps.
8. Reboot
Upgrading from previous versions of CM10
1. Reboot to Recovery.
2. Select the ROM zip from your SD Card and flash.
3. Flash Google Apps.
4. Reboot
Sources
Click to expand...
Click to collapse
https://github.com/dhiru1602
Credits
Click to expand...
Click to collapse
codeworkx
sconosciuto
Known Issues
Click to expand...
Click to collapse
None
The Google Apps package doesn't include Google Home, Google+, Hangouts and Face Detection.
Yaay Finally,
>testing,
a preview is coming soon
Thank You Master
Thank you master Dhiru!!! Great job!
Thanks i flash it and Report =)
Gesendet mit meinem Mäusekino =)
Hi Dhiru.. Currently on it and its great work... A big thanks to you bro..
I have two questions.
1. How to SWAP SD Card.
2. How to disable Touchpad lights.
Oh God Dhiru you shocked me again!
But oops! I got stuck at the first boot screen. Previous was your CM10.2 A4. Flashed CM11 and gapps without wiping anything. After rebooting it stucked.
Edit: Tried clean flash from DDLF2 but still stucked after CM11A1 flashing.
First look.. Awesome...
Unable to customize UI.. Seems like brightness is little higher even at the minimal level..
So far so good...
Hit Thanks if I have helped you...
Sent from I9003 XDA App
thanx
thanx dhiru for keepig our device alive samsung ditched our phone but thanks to you devs for keeping our device alive :good::good::good::good:
big thanx Dhiru for your amazing work, finally Kitkat arrived for our device, will try it and subscribe this thread...
best regards,
deDante
CF-ROOT
Hi @dhiru1602
please share the CWM or CF-ROOT you use to flash CM rom from stock.
thanks
chongns said:
Hi @dhiru1602
please share the CWM or CF-ROOT you use to flash CM rom from stock.
thanks
Click to expand...
Click to collapse
And to come to think of it, how did you get 240 likes if you don't know which CF-ROOT to use?
Here, tho. Download.
woooow,it's so smooooth.and the free ram is almost 100+MB.:good:
I installed the googlehome. it works fine.but how to make the Statusbar transparent?
nbrian2012 said:
And to come to think of it, how did you get 240 likes if you don't know which CF-ROOT to use?
Here, tho. Download.
Click to expand...
Click to collapse
Different ROM, different RAMdisk
Downloading now...... Thanks dhiru
Will try to give the review once i have tested it
nbrian2012 said:
And to come to think of it, how did you get 240 likes if you don't know which CF-ROOT to use?
Here, tho. Download.
Click to expand...
Click to collapse
By porting "CF-ROOT" for those CF-ROOT which make people phone boot loop .....funny hah...
well, i just want to ensure, our member are using the cwm or cf-root which Dhiru is using so, we can avoid unnecessary incompatibility between our so old cf-root. and also "why i get status 7 ? "
Downloading now...... Thanks dhiru
Will try to give the review once i have tested it
AWESOME. Amazing. Dhiru you're the best, seriously. Thank you for doing this. I hope you can make a stable ROM out of this. Thank you so much.
EDIT: Waited patiently for this... what are the absolute major bugs which effect everyday stuff? Phone calls/texts/app incompability/battery ... anyone who is using the ROM currently, please answer.
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.1 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
WARNING: I've bricked my tablet into APX mode around the 10th time of flashing this ROM (recovery froze and it rebooted into APX). The new (Update 1) recovery should be safer than the old one, but flash at your own risk!
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Device-specific source code for the Acer A700 are available from https://github.com/CyanogenMod/android_device_acer_a700 and https://github.com/CyanogenMod/android_kernel_acer_t30
Do not submit bug on CyanogenMod issue tracker
Downloads
Latest Nightly: http://get.cm/?device=a700
Google Apps: http://goo.im/gapps
Installation
Install CWM recovery from http://forum.xda-developers.com/showthread.php?t=1791165 (note that the old touch version will not work because of incorrect default.prop from CWM builder)
Do a Nandroid Backup!
Install the ROM using ClockworkMod Recovery
Optionally install the Google Addon
Wipe data if coming from stock
Changelog
A rough changelog is (will be) available here:
http://changelog.bbqdroid.org/#/cm10/a700 or http://cm10log.appspot.com/?device=a700
Reporting Bugs
You are allowed to report bugs only in this thread.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow.
Code:
What is your--
Phone model:
Radio (baseband):
CM version:
CM Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance settings (other than stock):
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Older pre-nightly Download
See this post.
Note to Official JB Users
Jelly Bean bootloader is only supported on 201212023-EXEPRIMENTAL and later NIGHTLIES.
Awesome!
will flash it later when back from work and provide feedback (too annoyed with the stock rom atm) so i will give it a go!
cheers
Awesome! Pace is speeding up. Thanks for your efforts.
pawitp said:
...
[*]Install CWM recovery from http://www.mediafire.com/?9usi98fs7jpdf7w (the touch version in the other thread will not work because of incorrect default.prop from CWM builder)
...
Click to expand...
Click to collapse
The CWM is not the one from the "CWM Recovery 6.0.1.0 for A700" thread, right?
Cheers
Peter
aticatac said:
Awesome! Pace is speeding up. Thanks for your efforts.
The CWM is not the one from the "CWM Recovery 6.0.1.0 for A700" thread, right?
Cheers
Peter
Click to expand...
Click to collapse
No, read inside the brackets
The "CWM Recovery 6.0.1.0 for A700" has broken build prop and will cause the device check to fail.
pawitp said:
No, read inside the brackets
The "CWM Recovery 6.0.1.0 for A700" has broken build prop and will cause the device check to fail.
Click to expand...
Click to collapse
Actually, I did read inside the brackets, but the CWM in the mentioned thread is not a touch version, or so I thought, that's why I asked.
EDIT: Now I realised that we were talking about the exact same thread title.
Anyways, I will flash this one, give it a whirl and read twice or more next time.
Jeez, where is my mind...
Thanks again.
Does the CM10 include the performance update?
does anyone else get e:Can't mount /sdcard/ ?
cwm tells me can't mount sdcard and emmc but data, cache and system mount fine (backup even stores on the sdcard under cwm folder)
Can you give us the MD5 CWM recovery ? Thx
ups forgot the most important screen
just redid it same error
PS:
(used your recovery.img as stated above)
Buster99 said:
ups forgot the most important screen
just redid it same error
PS:
(used your recovery.img as stated above)
Click to expand...
Click to collapse
dou you have an external sd card?
looking forward for cm on the a511. have fun with your a700
Sent from my A511 using XDA Premium HD app
What size should do the Nandroid Backup ? Mine do 15Mo !
Blindie said:
dou you have an external sd card?
Click to expand...
Click to collapse
yes but took it out prior flashing the recovery.img so atm no - no 2nd sdcard
Does it wipe the internal storage ?
imtheyoyo said:
What size should do the Nandroid Backup ? Mine do 15Mo !
Click to expand...
Click to collapse
mine is 165mb
aibo said:
Does it wipe the internal storage ?
Click to expand...
Click to collapse
should not since after successfull install you wipe cahce and dalvik not sd
i just reflashed the recovery - still no joy
Very nice ! Tanks a lot !
But no sound for me ...
Have you got sound ?
enico64 said:
Very nice ! Tanks a lot !
But no sound for me ...
Have you got sound ?
Click to expand...
Click to collapse
I have sound.
So far so good, thank you.
I do enjoy the lack of bloat.....
aibo said:
Does it wipe the internal storage ?
Click to expand...
Click to collapse
The installer doesn't, but you'll need to wipe data for it to boot successfully. Wiping data won't wipe your internal sdcard though.
I'm getting the triangle of death after flashing the recovery in the OP...
I had the other CWM you posted in the other thread which the tablet seemed to boot into just fine.
i'm running a a700 with the a701 rom from way back, is that my issue?
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.1 (JB), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
IMPORTANT!
Click to expand...
Click to collapse
* PLEASE READ THE ENTIRE TOPIC BEFORE FLASHING THE ROM.
Bug Reports
Click to expand...
Click to collapse
* REPORT BUGS IN THE TOPIC ONLY.
* DON'T SEND ME PM MESSAGES ABOUT BUGS OR FEATURE REQUESTS.
* ONLY REPORT THE BUGS IN CM10. I DON'T PROVIDE SUPPORT FOR OTHER ROMS. POST IN THEIR RESPECTIVE THREADS.
* IF YOU ARE ON A CUSTOM KERNEL, FIRST CHECK WITH THE STOCK KERNEL AND THEN REPORT THE BUG.
Downloads
Click to expand...
Click to collapse
ROM Downloads
Google Apps - Download from ROM Manager or from Here
Changelog
Click to expand...
Click to collapse
Alpha 4 - 12022012 - WIPE!
Upgrade to MTD partitioning. No more BML!
Uses YAFFS filesystem for Onenand.
Fixed Front Facing Camera Capture
OMX Encoders and Decoders are compiled from Source.
Fix Orientation issues with Front Camera in third party applications.
Front Camera Image rotation 90 degrees to match orientation.
Front Camera Stretch Preview Fixed.
Fixed several memory leaks in Camera HAL.
IMPORTANT! READ BEFORE FLASHING THIS RELEASE!
1. This ROM will wipe data due to different partitioning. The device would reboot while flashing and resume again.
2. Once on this ROM, the most effective way of going back to any other ROM would be to repartition from Odin.
3. While converting the filesystem, your efs that has your IMEI is backed up to /emmc/backup/efs. Keep a backup on your PC just in case.
4. Incase if you don't get a network signal, check if your IMEI and Baseband are proper. If not, go back to stock and try again.
5. Do NOT use Odin to flash Modems. Due to different partitions, Odin will screw up your existing MTD setup.
Alpha 3 - 10132012
Updated base to 4.1.2
Improvements to 720P Video Playback.
Fixed crash after recording video.
Fixed duplicates in Media Storage (Wipe Recommended).
Changes from upstream.
Alpha 2 - 09232012
Fixes for CM10
Fixed Bluetooth.
Fixes from CM9
HWComposer Hacks for increased performance.
Fixed Battery Drain (Reverted Samsung Sync Fix).
Camera opens much faster.
Autofocus fixes for Camera Timer mode.
Changes and Fixes from Upstream.
Alpha 1 - 03092012
Initial Release
Installation Instructions
Click to expand...
Click to collapse
This ROM is divided into 2 parts and some of the applications are installed on the /data partition due to lack of space for full Jellybean installation.
Hence you will have to reflash the rom after you factory reset or wipe /data partition.
Stock ROM
1. Flash CWM Compatible Kernel (CF ROOT)
2. Reboot to Recovery.
3. Wipe Data / Factory Reset.
4. Select the ROM zip from your SD Card and flash.
5. Go to Advanced -> Reboot Recovery.
6. Mounts and Storage -> Format dbdata
7. Flash Google Apps.
8. Reboot
Any other AOSP ROM (CM7/MIUI/CM9)
1. Reboot to Recovery.
3. Wipe Data / Factory Reset.
4. Select the ROM zip from your SD Card and flash.
5. Go to Advanced -> Reboot Recovery.
6. Mounts and Storage -> Format dbdata
7. Flash Google Apps.
8. Reboot
Upgrading from previous versions of CM10
1. Reboot to Recovery.
2. Select the ROM zip from your SD Card and flash.
3. Flash Google Apps.
4. Reboot
Sources
Click to expand...
Click to collapse
https://github.com/teamhacksung
https://github.com/dhiru1602
All Credits to
Click to expand...
Click to collapse
codeworkx
Teamhacksung
waleedq
Adi_Pat
Known Issues
Click to expand...
Click to collapse
1. WIFI doesn't work perfectly. Network strength doesn't show up and the network often disconnects.
2. There is LAG in the UI due to lack of Hardware Composer.
3. Video recording and playback suffers low framerate issues. Will be fixed soon.
4. Built-in WiFi hotspot doesn't work. Please use third party applications.
WOOWW! Thank you dhiru!!! going to download!!
yeaaaah dhiruuuuuu!!!YOU ARE THE B E S T!!!!thx you very much
Thanks dhiru...waiting for download link~
Interesting! Looking forward to this rom.
Thanks, good luck in development
Sent from my GT-I9003 using xda app-developers app
Bluetooth is unstable even if you use Bluetooth file transfer?
oooh my god
wait patiently link
thank you dhiru
finally it is here..!!
Can't wait to try it now..!!
Sent from my GT-I9003 using xda premium
Upgrading from previous versions of CM9
1. Reboot to Recovery.
2. Select the ROM zip from your SD Card and flash.
3. Flash Google Apps.
4. Reboot
Click to expand...
Click to collapse
so if i am on CM9 A12, i don't need to do a data wipe?
thank you dhiru!
the speed is extremely slow...
BTW~! Thx Dhiru~!!!
did you fix the problems about the partition? does project butter work propely?
Finally JB for SL. Awesome stuff! Thanks a ton for this.
Sent from my GT-I9003
OMG
Is this really happening to our device.
Extraordinory....!
Sent from my GT-I9003 using xda premium
How to flash from aokp?
Sent from my GT-I9003 using xda app-developers app
A few questions ... Does Project Butter and google now work?
dhiru1602 said:
* ONLY REPORT THE BUGS IN CM9.
Click to expand...
Click to collapse
Anyways AN AWESOME WORK!!!! Btw i think there is a mistake in the op it has to be report the bugs in cm10.
dhiru1602 said:
Bluetooth doesn't turn on at times and maybe drains battery too.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1864547
just read this....is this implemented in CM 10 ???
Thanks to dhiru an the Team of cm for the work
Sent from my GT-I9003 using xda app-developers app
Gondya bhau said:
http://forum.xda-developers.com/showthread.php?t=1864547
just read this....is this implemented in CM 10 ???
Click to expand...
Click to collapse
Would that Work on CM10 as OP mentions "ics" roms?
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.1 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Downloads
Latest Version:
U8160/80 11052013
U8150
U8120/10/00
Google Apps:
11052013
Installation
- First time flashing CM10 to your Huawei U81xx Device (or coming from another ROM)?
Root Your Device and install ClockWorkMod Recovery/Amon_RA Recovery
Reboot into recovery using Volume-Up + Power
Do a Nandroid Backup! (Opional)
WIPE ALL (wipe data/factory reset + format /system + format /sd-ext)
Install the ROM from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery
Install Patches from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery (if present in thread)
Optionally install Google Apps
- Upgrading from CM7/CM9/CM10?
Do a Nandroid Backup! (Optional)
WIPE ALL (wipe data/factory reset + format /system + format /sd-ext)
Install the ROM from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery
Install Patches from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery (if present in thread)
Optionally install Google Apps
- Upgrading from another CM10 Build?
Do a Nandroid Backup! (Optional)
Wipe Cache and Dalvik-Cache
Install the ROM from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery
Install Patches from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery (if present in thread)
Optionally install Google Apps
Note: Is always Recommended to do WIPE, or you can have problems (not always).
Alberto96's Mods
Tweaked to the max
99% LDPI Resized
OTA Updater Included
MX Player Included for Video Playback
Notes app Included (essential app that in CM10 is not included)
Modded QuickPic instead of Froyo Limited Gallery
Reporting Bugs
You are allowed to report bugs only at the u81xxcm10 bug tracker. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
REPORT BUGS IN THIS THREAD ONLY
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow.
Code:
What is your--
Model:
ROM version:
ROM Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup or other backup app:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance settings (other than stock):
Attach a Logcat of the issue in plain text.
What steps will reproduce the problem?
1.
2.
3.
Failure to fill out the above template or attach a log will result in this
issue being closed immediately
Changelog
Changelog is available here
Recoveries (tested and working for all devices, U8160_80 are my builds)
For RZ Recovery Features see here
Source (to be completed)
People who made this possible:
Alberto96
LeoDeos (Alberto96's Recognized Themer )
psyke83 (Thanks for Kernel, Binaries, Source, Time Spent and much more)
tilal6991 and aorth for U8150 Stuff and much more (sorry for delay)
slymobi and joilaroi for U8120/10/00 Stuff and much more (sorry for delay)
AC1953 (Thanks for fantastic audio drivers, ideas and much more)
CyanogenMod Team
Others
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Reserved
Thanks Alberto
Really you will made a version also for ideos u8150?
Too laggy on my U8160.
Sent from my U8160 using xda premium
I know its laggy (copybit is still disabled). But its stable and all works as CM9 (except speed xD)
Giogts said:
Really you will made a version also for ideos u8150?
Click to expand...
Click to collapse
Yes
S2E script is working??
Sent from my U8180 using xda premium
Ehm, dont know. I dont tried it, maybe is working
24122012 version have a bug, third boot causes bootloop, im uploading patch to apply (via cwm) Sorry to all CM10 Users
UPDATE: Patch is up !
when is perfect be on huwei u8110?
Never will be perfect on U8120/10/00 but tester is giving me all logs. Only on U8160/80 and U8150 can work all.
U8150 CM10 is up!
want more speed to U8160
Without copybit is impossible
U8120/10/00 CM10 in upload!!!
Bugs for U8120/10/00:
-Wifi not working
-Tethering (fix wip)
-Volume keys and touch mouse not working
U8120/10/00 is using U8150 kernel as no sources and no kernel is out for U8120/10/00 CM10. This makes wifi and some keys not working.
UPDATE: ROM Uploaded
8110
screen needs calibration at sim lock screen ı hit 7 it key in 4 if ı hit soft menu button its open app drawler
What is the ThirdBootPatch (Only for U8160/80)
please can you put in first page all bug of u8150 version?
Bugs are here!!!!!!!!!!!!!!!!!!!!!!!! In u81xxcm91 bug tracker !!!! Read thread please Link is specified in first post, and also here: http://code.google.com/p/u81xxcm10/issues/list
paslanmaz said:
screen needs calibration at sim lock screen ı hit 7 it key in 4 if ı hit soft menu button its open app drawler
Click to expand...
Click to collapse
Unfortunately with U8150 Kernel we can't calibrate screen, sorry.
polac said:
What is the ThirdBootPatch (Only for U8160/80)
Click to expand...
Click to collapse
The name means all Third Boot Patch. Without it phone will bootloop at third boot (U8160/80)
Alberto96 said:
U8150 CM10 is up!
Click to expand...
Click to collapse
cant boot on 8150:/
CM13.0 (Marshmallow) unofficial builds for the TATE
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at any of us for messing up your device, we will laugh at you.
* Collectively, and at the same time.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review.
download:
new: https://www.mediafire.com/folder/u7sb7p10ik7v0/tate
old:https://www.mediafire.com/folder/5a97vbv93k24n/tate
old:https://www.mediafire.com/folder/w9nh7oyabwvww/tate
backup before flash, gapps need for upgrade, don`t flash SuperSU
deep sleep fixed
http://opengapps.org/ (arm, 6.0)
Kernel auditor - Low memory killer - Very aggressive
If you install Gapps after the ROM has been booted for the first time you either need to wipe data and reboot. Without this Gapps will crash constantly. This is due to the new permissions-system in M.
bluetooth lte-version fix: https://forum.xda-developers.com/ki...elp/kindle-fire-hd-8-9-bluetooth-rom-t3315904
Great, now it's time to bring TWRP 3.0.0.0 for better results.
alexander_32 said:
Great, now it's time to bring TWRP 3.0.0.0 for better results.
Click to expand...
Click to collapse
TWRP 3 is not really a necessity. People have been flashing MM numerous times with 2.8.x.x builds for a while now without trouble.
build 20160215 (backup before flash, gaaps need for upgrade): http://www.mediafire.com/download/pj2994j9p358tit/cm-13.0-20160214-UNOFFICIAL-tate.zip
xWolf13 said:
TWRP 3 is not really a necessity. People have been flashing MM numerous times with 2.8.x.x builds for a while now without trouble.
Click to expand...
Click to collapse
Look at TWRP changelog:
https://twrp.me/site/update/2016/02/05/twrp-3.0.0-0-released.html
It has sense!
I'll try to compile it later (I don't know when).
alexander_32 said:
Look at TWRP changelog:
https://twrp.me/site/update/2016/02/05/twrp-3.0.0-0-released.html
It has sense!
I'll try to compile it later (I don't know when).
Click to expand...
Click to collapse
If you do plan on compiling, use transi's github repos (found here). I have a prebuilt manifest with the repos already configured that you can place in the hidden .repo folder of your Android build environment if you need it up on my GitHub here.
(I recommended transi's repos because they're more up to date, and there's also that custom Marshmallow boot logo. )
Sent from my Amazon Jem using XDA Labs
monster1612 said:
If you do plan on compiling, use transi's github repos (found here). I have a prebuilt manifest with the repos already configured that you can place in the hidden .repo folder of your Android build environment if you need it up on my GitHub here.
(I recommended transi's repos because they're more up to date, and there's also that custom Marshmallow boot logo. )
Sent from my Amazon Jem using XDA Labs
Click to expand...
Click to collapse
Thank you very much :good::good::good:
@transi1 Great rom! Very fluid. Only issue is the lack of deepsleep. Do you have an idea what might be causing it?
Also I flashed the ROM with Twerp 2.7.x.x so Twerp 3.0 is not required (but if you guys build it,i'll still take it )
Thanks for bringing CM13!
hope this rom to be official
build 20160218 (backup before flash, gapps need for upgrade, don`t flash SuperSU): http://www.mediafire.com/download/j18vp0uo1mca0qa/cm-13.0-20160218-UNOFFICIAL-tate.zip
deep sleep fixed
Screenshots please??
transi1 said:
build 20160218 (backup before flash, gapps need for upgrade, don`t flash SuperSU): http://www.mediafire.com/download/j18vp0uo1mca0qa/cm-13.0-20160218-UNOFFICIAL-tate.zip
deep sleep fixed
Click to expand...
Click to collapse
My battery thanks you. From what I can tell, everything that was working in cm12.1 also works in cm13. Along with very aggressive memory killer recommended from OP, I'm also using max cpu freq 1500MHz with performance governor and deadline scheduler with 512kB read-ahead in kernel adiutor and the performance is good. In cm12 I remember several crashes with the same cpu oc but for now it seems stable.
How do I get root for cm13? I dare not flash SuperSU.
Sent from my Amazon Tate using Tapatalk
Jrhoop said:
How do I get root for cm13? I dare not flash SuperSU.
Sent from my Amazon Tate using Tapatalk
Click to expand...
Click to collapse
LOL! Definitely don't flash supersu! Just got my kindle back up from soft bricking it that way.
Jrhoop said:
How do I get root for cm13? I dare not flash SuperSU.
Click to expand...
Click to collapse
Isn't the risk of flashing stuff half the fun? If you like flashing stuff on tate you should pick up a fastboot cable as good practice, you can grab one from china for <$4.
Anyway, supersu works just fine, you just have to make sure it doesn't install in systemless mode by default which patches boot incorrectly.
Simply pass this line in TWRP (advanced>terminal) before flashing supersu zip:
Code:
echo SYSTEMLESS=false>>/data/.supersu
You'll see it say "System mode" in the output from flashing if you've done it correctly. If not, make sure you don't reboot yet, and just re flash a working rom zip to restore boot.img (like cm13 from OP).
r3t3ch said:
Isn't the risk of flashing stuff half the fun? If you like flashing stuff on tate you should pick up a fastboot cable as good practice, you can grab one from china for <$4.
Anyway, supersu works just fine, you just have to make sure it doesn't install in systemless mode by default which patches boot incorrectly.
Simply pass this line in TWRP (advanced>terminal) before flashing supersu zip:
Code:
echo SYSTEMLESS=false>>/data/.supersu
You'll see it say "System mode" in the output from flashing if you've done it correctly. If not, make sure you don't reboot yet, and just re flash a working rom zip to restore boot.img (like cm13 from OP).
Click to expand...
Click to collapse
Yes I guess, but usually not sensible to do the opposite of what the developer said. I have a fast boot cable, actually two as I thought I had lost one. My attempt at flashing twrp last week using flasify didn't go so all. Anyway fixed that up and the kindle lives on.
I'm on philz recovery and not twrp but I'm guessing the instructions are fairly similar?
Sent from my Amazon Tate using Tapatalk
Jrhoop said:
Yes I guess, but usually not sensible to do the opposite of what the developer said. I have a fast boot cable, actually two as I thought I had lost one. My attempt at flashing twrp last week using flasify didn't go so all. Anyway fixed that up and the kindle lives on.
I'm on philz recovery and not twrp but I'm guessing the instructions are fairly similar?
Click to expand...
Click to collapse
If you can enter fastboot you have nothing to fear. TWRP is the only recovery that is consistently updated and is highly recommended over philz/cwm. Download TWRP 2.8.7.0 and extract the img from the zip.
I've never been a fan of flashing tools from within android. It's much simpler to just go into fastboot and use:
Code:
fastboot -i 0x1949 flash recovery kfhd7-twrp-2.8.7.0-recovery.img
You don't need to flash SuperSU. Enable dev mode then select dev settings and change the root setting
Maromi said:
You don't need to flash SuperSU. Enable dev mode then select dev settings and change the root setting
Click to expand...
Click to collapse
Hey what rom are you running on the KFHD?
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
Click to expand...
Click to collapse
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Downloads
Latest builds: https://www.mediafire.com/folder/cwzwh1c90stij/SM-G355HN
Google Apps: http://wiki.cyanogenmod.org/w/Gapps
Installation
1. TWRP Recovery required:
http://forum.xda-developers.com/galaxy-core/development/samsung-galaxy-core-2-sm-g355h-m-t2998094
2. Copy ROM on your ExtSdCard
3. Reboot into Recovery using 3-button-combo (home + volume up + power)
4. Do a Nandroid backup!!!
5. WIPE (wipe data/factory reset/wipe cache partition/internal storage)
6. Install the ROM from extarnal SD card using TWRP Recovery
7. Install Root from here:
http://forum.xda-developers.com/galaxy-core/help/root-galaxy-core-2-t2966445
8. Optionally install the Google Addon
Known Issues
Please do not report bugs if it is already listen in the list of known issues
* Some CyanogenMod features a missing - please do not file bug reports for those.
* Cannot set value via custom brightness "Edit" menu
* No account selected for Backup (gapps problem?)
Reporting Bugs
You are allowed to report bugs only in this thread. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
* Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
* If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
* If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved
Known issues of current build :
* GPS not working. Will be soon.
* root doesn't work trough developers options
* What you report.
This ROM wouldn't be possible without:
* CyanogenMod
* Samsung Open Source Center
@ngoquang2708
@doesntexits
@cleverior.ipul
Sorry if I forgot someone
XDA:DevDB Information
kanas3gnfcxx (SM-G355HN), ROM for the Samsung Galaxy Core
Contributors
Y300-0100
Source Code: https://github.com/Y300-0100?tab=repositories
ROM OS Version: 4.4.x KitKat
Version Information
Status: Alpha
Created 2016-04-13
Last Updated 2016-04-13
changelog
20160415
* Fixed low volume while using headphones and playing music
2016 04 23
* Fixed NFC (not all tags can be detected )
2016 04 27
* Fixed freeze phone when try to turn of developer options, add Torch thanks to @doesntexits
And when you recording videos first change setting's of audio codes in camera settings.
@Y300-0100
Great work
I got one Q: Did this phone support dual-SIM? I see only one signal there
Also, the correct device codename is kanas3gnfc, not the xx suffix. You can get the right codename in the rootdir folder
How to install in SM-G355M?
Amazing work, i have a noob question, how can i install in SM-G355M?
Thank u , n sorry for my bad english
doesntexits said:
@Y300-0100
Great work
I got one Q: Did this phone support dual-SIM? I see only one signal there
Also, the correct device codename is kanas3gnfc, not the xx suffix. You can get the right codename in the rootdir folder
Click to expand...
Click to collapse
No. HN is single sim model only and code name is kanas3gnfcxx from stock build prop and https://androiddevice.info/submission/29929/show
I realize that when I get asserts prop error with kanas3gnfc when I tried to install rom.
Marco123V said:
Amazing work, i have a noob question, how can i install in SM-G355M?
Thank u , n sorry for my bad english
Click to expand...
Click to collapse
later today when I upload it...
for testing because i don't have M
Y300-0100 said:
No. HN is single sim model only and code name is kanas3gnfcxx from stock build prop and https://androiddevice.info/submission/29929/show
I realize that when I get asserts prop error with kanas3gnfc when I tried to install rom.
Click to expand...
Click to collapse
That's the recovery's fault, since it only get the .name instead of .device
If you say so, the codename in cm is cm_kanas3gnfc than the xx suffix (just like the .name in stock). Also, you can add kanas3gnfcxx in TARGET_OTA_ASSERT_DEVICE flag, so no installation error is produced
Y300-0100 said:
7. Install Root from here:
Click to expand...
Click to collapse
No need for this, since userdebug builds already rooted
Vv
What about the SM-G355H ? will it work or no ?
update-script not working for variant M
Detele is assert for working
Not Working:
-MTP
-Disable Developer Option or Debugging caused bootlop
Joaquin Scala said:
update-script not working for variant M
Detele is assert for working
Not Working:
-MTP
-Disable Developer Option or Debugging caused bootlop
Click to expand...
Click to collapse
1. you are using twrp for kanas3gnfc
2. to fix mtp I need stock boot.img for H and M because of ramdisk files
3. that I don't know. Don't have that issue. if phone reboots when you disable or enable Developer Option or Debugging use grab /proc/last_kmsg
as I mentioned in first post.
4. currently I trying to fix low volume issue!!
5. As you all know I own only SM-G355HN and as I mentioned before there has to be maintainer for each device.
6. What I did regarding twrp for H and M, fix wifi and build roms for them it's because I wanted to encourage other devs (or user enthusiasts )who own devices to include themselves to build. Because I can see here on xda some folks started with development from scratch
7. end
and PS.
All my sources are up to date so anyone can use them and with detailed instruction how to build
https://github.com/Y300-0100/android_device_samsung_kanas3g
https://github.com/Y300-0100/android_device_samsung_kanas3gub
https://github.com/Y300-0100/android_device_samsung_kanas3gnfcxx/blob/master/README.md
fixed low volume issue!!
YES
I fixes low volume during typing stupid post above in 5 min.
So if you want me to commit it to my github I want to see 1000 thanks click by tonight
PS.
No 1000 more like 10 000
Y300-0100 said:
YES
I fixes low volume during typing stupid post above in 5 min.
So if you want me to commit it to my github I want to see 1000 thanks click by tonight
PS.
No 1000 more like 10 000
Click to expand...
Click to collapse
Well, if mods see this, your account will be... you know
Btw, good job. It's good to see more SPRD devices get CM
doesntexits said:
Well, if mods see this, your account will be... you know
Btw, good job. It's good to see more SPRD devices get CM
Click to expand...
Click to collapse
Thanks for info. But I didn't use any offensive word and if you are referring to 10 000 it's joke ended with
If they think that something should be "done" with my account so be it.
BTW it's already up to date. You know what
Y300-0100 said:
Thanks for info. But I didn't use any offensive word and if you are referring to 10 000 it's joke ended with
If they think that something should be "done" with my account so be it.
BTW it's already up to date. You know what
Click to expand...
Click to collapse
OK, the "10000" is what i referenced
Btw, seems you're missing some libs to get NFC working. Did you tried with any tags/devices?
If it doesn't work then, take a look at this: https://github.com/TheNikiz/android...fc3g/blob/cm-11.0/device_vivaltonfc3g.mk#L101
Some extras configs/packages for NFC are included there. See if any of them works with you
asser19 said:
What about the SM-G355H ? will it work or no ?
Click to expand...
Click to collapse
Sound fix will be but as I mentioned before MTP wont be fixed unless someone provide me stock boot.img for SM-G355H and SM-G355M.
and for a notice I have slow PC so for each build I need aprox 8 hours.
Build for SM-G355HN is uploading right now in SM-G355HN folder on mediafire.
doesntexits said:
OK, the "10000" is what i referenced
Btw, seems you're missing some libs to get NFC working. Did you tried with any tags/devices?
If it doesn't work then, take a look at this: https://github.com/TheNikiz/android...fc3g/blob/cm-11.0/device_vivaltonfc3g.mk#L101
Some extras configs/packages for NFC are included there. See if any of them works with you
Click to expand...
Click to collapse
I'm lazy. I will add packages and files for NFC. I did it before for some other devices, will tray to add FM and screen recording if hardware support it.
Y300-0100 said:
I'm lazy. I will add packages and files for NFC. I did it before for some other devices, will tray to add FM and screen recording if hardware support it.
Click to expand...
Click to collapse
FM is not supported by CM, so you've to implement your own
Also screen recording too. But, screen recording will lag like sh*t on these such devices
Y300-0100 said:
Sound fix will be but as I mentioned before MTP wont be fixed unless someone provide me stock boot.img for SM-G355H and SM-G355M.
and for a notice I have slow PC so for each build I need aprox 8 hours.
Build for SM-G355HN is uploading right now in SM-G355HN folder on mediafire.
Click to expand...
Click to collapse
Here is the stock boot.img form SM-G355M, it's from the last Samsung Update
boot.img
Hello, you can install the rom with TWRP-3.0.2-0-kanas3gnfc.img normally. Now I work MTP. Thank you very much, hoping for a newer version of android L or M.