Hi Guys..I found this and thought this may help us for Cyanogen Mod. Cm9 For Mtk6577 1GHz Cortex A9.
Its CM 9 and it's for Wiko Cink Slim mobile (almost similar to our device MMX A110). All credits @nicklas519
Personally I flashed it into my Micromax a110. and it gone upto bootanimation.
Micromax Specs
http://www.gsmarena.com/micromax_a110_canvas_2-5088.php
Wiko Cink Slim Specs
http://www.handsetdetection.com/properties/vendormodel/Wiko/Cink Slim
CM 9 for Wiko
http://forum.cyanogenmod.com/topic/75384-need-help-cm9-for-mtk6577-it-boot/
https://docs.google.com/file/d/0B9BWk4CZu9uqdG9vWlZRSnRyVFU/edit?pli=1
Source codes for Wiko CM 9
https://github.com/wiko-repo/android_device_wiko_s8073
https://github.com/wiko-repo/android_vendor_wiko_s8073
https://github.com/wiko-repo/android_kernel_wiko_s8073
https://github.com/wiko-repo/android_device_wiko_common
@[email protected], @andiroxu, @khan_frd2002, check if this can help your current build.:fingers-crossed:
Someone make it boot at least we can have cm9,until we get cm based on jellybean.
boot
Is it booted(https://docs.google.com/file/d/0B9BWk4CZu9uqdG9vWlZRSnRyVFU/edit?pli=1) on our canvas 2?
showstopper1 said:
Someone make it boot at least we can have cm9,until we get cm based on jellybean.
Click to expand...
Click to collapse
yes +1 ...if cm9 is successful then a new HOPE will be there for our community and some guy shared the mediatek sources including ril...etc of 12 gb extracted size ....captain nemo already informed in thread
Not Booted
I HAVE DOWNLOADED ROM AND INSTALL IT BUT NO LUCK ITS BOOT LOOP SORRY GUYS THIS NOT WORKING FOR OUR DEVICE:crying:
Hey caption nemo said that it's boot loop ..
So wait n watch..
Our dev do hard work n make it boot
Sorry didn't read that think
Sent from my A250 LegoIce™_Turbo using XDA Premium 4 mobile app
Bro just try first flash stock jb rom via sp tools ...then boot stock rom n then flash the rom it may work ....there are chances :good::good:
best of luck .....if any problem still then pm me
DONT FORGET TO HIT THANKS
:good::good::good:
I think first we need to flash stock ICS using SP tool, then we should try this ROM. Because the creator @nicklas519 said it's booting completely and system ui is running but all apps are having FC.
Hello ,
The Rom boot and the System UI running , but all other apps forced close , because the dalvik cache isnt writeable and the sdcard isnt writeable .
Thanks
nicklas519
Click to expand...
Click to collapse
captain_nemo said:
I think first we need to flash stock ICS using SP tool, then we should try this ROM. Because the creator @nicklas519 said it's booting completely and system ui is running but all apps are having FC.
Click to expand...
Click to collapse
bro i think you can use varun's ics kernel.....
poran123 said:
bro i think you can use varun's ics kernel.....
Click to expand...
Click to collapse
Did you try?
flash rom n try ics boot .img it may work n change boot animation to any 840x854
captain_nemo said:
Did you try?
Click to expand...
Click to collapse
no bro... my net is slow so i didnt download and m just suggesting..
You need to flash stock ice cream sandwich from sp splash tool before flashing this.
Sent from my GT-I9500 using XDA Premium 4 mobile app
I heard there are complete sources for cm7 and cm9 for mt6577 .....why don't someone build it .....if have some experience in building CM
Sent from my A110 using XDA Premium 4 mobile app
According to ics sources are available n also for jb but ril sources is missing for jb according to me the main n real issue for mtk chip sets are that we don't have a good experienced devs to built the ROM like cm from source we have some great devs but they are not experienced in this.
Sent from my Micromax A110 using xda app-developers app
srinath29658419 said:
I heard there are complete sources for cm7 and cm9 for mt6577 .....why don't someone build it .....if have some experience in building CM
Sent from my A110 using XDA,premium 4 mobile app
Click to expand...
Click to collapse
Let me answer your question.
Yes ICS source is very complete, but alot of work is still needed.
You can check try-zet posts for an complete answer on this subject
And then we are talking about CM9/ICS... This is old news. Currently you have better performance and customization on the JB 4.1 / 4.2 builds, and adding the xposed framework plus modules , even better.
No one is interested on wasting time on an old OS, that won't bring nothing new.
Also CM requires some additional work to build.
B.Regards
Hi every one
I found this thread for CYANOGENMOD - S7180
its mtk 6577 5.5" smart phone
here is the link
http://hiphonebrazil.com/viewtopic.php?f=17&t=1889&sid=81c219de104b4448e53e5f8cab38eaf4
I will try to port it for my xtouch x405
any help will be appro.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/IMG]
these are the ss from the above link
EDIT:something i found after translating from the brazilian forum
This ROM is one of the most coveted on earth.
But why? There are advantages of it before the other?
Well, it is easy to find if you take a paced the reviews from Google
I can assure you that it is completely based on the source code
of Android and original equipment used in the Samsung Galaxy series
and the most renowned . manufacturers around the world Here are some key features: - Fully translated into Brazilian Portuguese (the original was Chinese); - lightness, smoothness, performance and reliability; - High gain in performance and battery consumption; - Root Access preinstalled; - Deodexadada and Zipalinhada; - Equallizador graph that improves the quality of sounds, including algorithm FLAC compression, which prevents data loss; - High sensitivity in Wifi and 3G connections; - Built-in menu function to direct the reboot ClockWorkMod; - Compatibility all launchers known, and has included the latest version of APEX 2.20; - Manager Cyanogen native files, with options Root, Root Explorer type; - Native Browser and two more: Gogle Chrome and Mozilla Firefox; - All productivity tools contained in other ROMs; - New options and functions in the system; - Embedded entire package of Google features Jelly Bean 4.2: - JB 4.2 Alarm Clock & Timer, normal regressive and "lag time"; - JB 4.2 Browser GPS (works with Wifi or 3G), you can inform the destination speaking; - JB 4.2 Google Now, fully functional; - JB 4.2 News and Weather; - JB 4.2 Voice Search, which means it meets and promptly, without being you type your search query in Google, for example; - JB Keyboard 4.2, which allows writing by sliding your fingers over the letters, forming words on the screen (sensational); - Several programs, widgets, extra games - and much more. .. Credits: TO-FALCAOBR - At the Port Rom for S50 - In what was the total base for this rom - At the Cyanogen developers; - Yuweng Forum "Xda-Developers", . * by various guidelines and helpfulness photos ROM: https://www.dropbox.com/sh/qhmwk5m5xzcjl7w/aF3VubjHTG and finally: *** DO NOTHING WITHOUT MAKE BACKUP OF YOUR ORIGINAL ROM! *** BEFORE ANYTHING ELSE, backup THAT YOUR ROM IS WORKING, BECAUSE IF ANY PROBLEM, YOU MAY RETURN TO STATE THAT WAS BEFORE. IF YOUR PHONE HAS CWMR, MAKE A BACKUP BEFORE 3, THEREFORE CAN GIVE ERROR RECOVERY AND YOU HAVE ANOTHER. ATTENTION IS NOT THE ORIGINAL RECOVERY UNIT, BY MAKE "ClockworkMod Recovery". 3 MAKE A BACKUP COMPLETE WITH TOOLS "MTK DROID TOOLS" SHOWN BELOW, EVEN DONE WITH CWMR. NOT HAVE CWMR NOT KNOW WHAT THAT AT LEAST READ THE TUTORIAL BELOW AND MAKE A BACKUP WITH 3 "MTK DROID ROOT & TOOLS ' FOR BACKUP OF YOUR ROM WITH "MTK DROID ROOT TOOLS &" FOLLOW THE TUTORIAL BELOW: https://www.dropbox.com/s/oxw3x6cyebbj4n9/01-ROOT-e-Backup-da-ROM-DE-FÁBRICA-MDRT.pdf Download MTK Droid Root & Tools_v243 http://dh.st/IE5 Google_USB_Driver_Rev_7_ (ADB_ driver): http://dh.st/AyV If the phone is already routed, you can backup the ROM this another way: https://www.dropbox.com/s/5w8mcxqpkgifonc/Tutorial_-_Backup_Facil_da_ROM.pdf Perform CWMR Download and use the method explained below. ========== SEE HOW TO INSTALL VIA CWMR ========== 01 - Put the ROM zip file in the root of the SDCARD (without unzipping anything, the way it is); 02 - when off between mode CWMR shaking "Power" keys and Volume (+); (To select options use the volume control + / - to confirm and use the "Power" button; 03 - MAKE LOGO 3 WIPES: - DO NOT FORGET: MAKE THESE WIPES 3 BEFORE BECAUSE IT IS MANDATORY THAT PRA RUN WELL. - wipe data / factory reset (in select and confirm "Yes" ...) - wipe cache partition (select and confirm the "Yes" ...) - wipe dalvik cache (this is within the menu " Advanced ") (select and confirm the" Yes "...) 04 - Then choose the option "Install Zip from SDCARD" and then select the ROM; 05 - Choose "Select Zip from SDCARD"; 06 - Select ROM file you placed on the SDCARD and confirm; 07 - A series of No, No, No. ..... It will appear "- Install .... YES" - one up front> select "YES "confirm; 08 - Just finish the patch and install the camera after reboot to enjoy your new ROM! ================== DOWNLOAD LINK FOR THE ROM: http://www.4shared.com/zip/RLCOrTlB/ROM-CyanogenMod-S7180-412.html LINK TO DOWNLOAD VERSION V2 WITH THE FIX THE CAMERA AND GPS + NEW LAUCHERS (MIUI, LEWA LENOVO AND LAUNCHER) http://www.4shared.com/zip/P9oQQRgb/ROM-CyanogenMod-S7180-412-v2.htmlLINK TO THE PATCH OF CAMERA - THANKS TO barkerpedro: http://www.4shared.com/zip/hJ7go3o6/2-Patch_Camera_N7100-e1901_v77.html http://www.4shared.com/zip/6GBtFrrE/2-Patch_Camera_N7100-e1901_v77.htmlrom-cyanogenmod-s7180-4.1.2-v3: https://mega.co.nz/#!h9ZgBJyb!QH8shEL3BzqVx6wmNorD3FypNHdkTOEIwvS6-RUaaWs ================== Good luck ...
Is it working in our phone ??????
:::::Hitting thanks wont cause you anything:::::
Related
Hello Folks, This is my first ROM. So go easy on me.
Suggestions, Comments, Allegations Welcomed!
Features :
Rooted
Busybox
Busybox as parts
Bash
init.d support
Zipaligned
Nano Editor added
app 2 ext
dalvik cache 2 ext
Updated SuperUser
Google Maps
RootUninstaller
Root Explorer
Lot of Free Memory (100mb+)
Improved Battery Life...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installation :
It is not required to wipe anything if you need to use your settings and already installed apps.
Copy to sdcard
Reboot into recovery
Flash this rom
Reboot
Done
Thanks everyone for their existing Roms and Custom Recovery without which this rom would be impossible. If i've missed any names in the installer credits please forgive me. Any suggestions, tips, comments, allegations is warmly welcomed. Everyone and anyone is allowed to copy / modify / tweak / edit this rom as per their requirements.
Again, folks, this is my first rom, so please go easy on me
Download
very gud rom
rudie_techie said:
Hello Folks, This is my first ROM. So go easy on me.
Suggestions, Comments, Allegations Welcomed!
Features :
Rooted
Busybox
Busybox as parts
Bash
init.d support
Zipaligned
Nano Editor added
app 2 ext
dalvik cache 2 ext
Updated SuperUser
Google Maps
RootUninstaller
Root Explorer
Lot of Free Memory (100mb+)
Improved Battery Life...
Installation :
It is not required to wipe anything if you need to use your settings and already installed apps.
Copy to sdcard
Reboot into recovery
Flash this rom
Reboot
Done
Thanks everyone for their existing Roms and Custom Recovery without which this rom would be impossible. If i've missed any names in the installer credits please forgive me. Any suggestions, tips, comments, allegations is warmly welcomed. Everyone and anyone is allowed to copy / modify / tweak / edit this rom as per their requirements.
Again, folks, this is my first rom, so please go easy on me
Download
Click to expand...
Click to collapse
thanx ruide thanx.............
not working
no system app is working with it.
no signal, no system, nothing.
And borax is not with us.
he brought galaxy a and leaves a60.
luckydogra said:
no system app is working with it.
no signal, no system, nothing.
And borax is not with us.
he brought galaxy a and leaves a60.
Click to expand...
Click to collapse
Can you please elaborate? I am using this rom right now, without any problems...
luckydogra said:
no system app is working with it.
no signal, no system, nothing.
And borax is not with us.
he brought galaxy a and leaves a60.
Click to expand...
Click to collapse
try a cleaning of cache and factory reset or cleaning partition....
i tried it and it works.... altohugh the ICS homescreen give force close error after every screen unloch, but no other probs.....
BTW borax still loves A60, he's a high devloper so he might be needin a high end phone for devlopment as A60 is a good phone for first Android enxperience.....
hey the download link is not working
How to Install Micromax A60
How to Install Micromax A60 to Ics Please tell me
is network,wifi,camera etc working?
is network,wifi,camera etc working? and what is the procedure to open into recovery mode. and what if i want to restore back to factory setting please tell the whole procedure step by step as i am new to this...
error on micromax a60
i renamed the IceSW_v1.0b_stable.zip file as update.zip and copied it to the sdcard and then rebooted in the recovery menu and then selected apply sdcard:update.zip. Then an error occurs saying
Opening Update Package
verifying update package
E:signature verification failed
installation aborted.
E:can't find MISC:
Please help
Which recovery r u using...stock recovery or coustom recovery.....
Sent from my Micromax A60 using XDA
update or shell
Dear all,
Thanks for the great work done by everyone, specially to rudie_techie, where i searched for the android update 2.3 to my micromax a60 but i have got the 4.0 treasure gold Now.
Here i got some question that is this a update for ics andro 4.0 or just a shell because in the image posted it shows Firmware version 2.1-update1
Here my question is if i update this rom, can my micromax a60 be consider as android 4.0 in android market
and can i install the android 4.0 application in my micromax andro a60
If there any problem with the ics 4.0 then is it posible to roll back settings to 2.1
It is a theme ROM(it's themed ICS over 2.1, still 2.1), and yeah if in future we get android 4.0 update then our phone will be considered ICS in market and we'll be downloading apps of ICS also.
shankar4kv said:
Dear all,
Thanks for the great work done by everyone, specially to rudie_techie, where i searched for the android update 2.3 to my micromax a60 but i have got the 4.0 treasure gold Now.
Here i got some question that is this a update for ics andro 4.0 or just a shell because in the image posted it shows Firmware version 2.1-update1
Here my question is if i update this rom, can my micromax a60 be consider as android 4.0 in android market
and can i install the android 4.0 application in my micromax andro a60
If there any problem with the ics 4.0 then is it posible to roll back settings to 2.1
Click to expand...
Click to collapse
anbu joeff hunter said:
Which recovery r u using...stock recovery or coustom recovery.....
Sent from my Micromax A60 using XDA
Click to expand...
Click to collapse
same error bro.i think its the recovery issue, which recovery are you using on your phone?
E:can't find MISC:
yogisays09 said:
same error bro.i think its the recovery issue, which recovery are you using on your phone?
E:can't find MISC:
Click to expand...
Click to collapse
Cmw 5...nd try Android download tool to flash...
Sent from my Micromax A60 using XDA
Is possible to change the clock colour to white?
rudie_techie said:
Hello Folks, This is my first ROM. So go easy on me.
Suggestions, Comments, Allegations Welcomed!
Features :
Rooted
Busybox
Busybox as parts
Bash
init.d support
Zipaligned
Nano Editor added
app 2 ext
dalvik cache 2 ext
Updated SuperUser
Google Maps
RootUninstaller
Root Explorer
Lot of Free Memory (100mb+)
Improved Battery Life...
Installation :
It is not required to wipe anything if you need to use your settings and already installed apps.
Copy to sdcard
Reboot into recovery
Flash this rom
Reboot
Done
Thanks everyone for their existing Roms and Custom Recovery without which this rom would be impossible. If i've missed any names in the installer credits please forgive me. Any suggestions, tips, comments, allegations is warmly welcomed. Everyone and anyone is allowed to copy / modify / tweak / edit this rom as per their requirements.
Again, folks, this is my first rom, so please go easy on me
Download
Click to expand...
Click to collapse
will this work on my Karbonn a1 ..??...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
iconiaN is a project I am starting to bring a unified stock rom to the A700 that will work on devices from all regions.
I will soon be making iconiaN a project on github in the next few weeks and will welcome contributions from you all.
About the rom:
Android 4.1.1 (Jelly Bean) - Based on latest available version
Multi-Region support - Choose your region while flashing (GB, US, DE, ES & FR)
exFAT and NTFS
USB Network Device support
CIFS Support
Fully working ROOT
Insecure boot.img
BusyBox
Zipaligned
Fully de-odexed
init.d scripts (BusyBox run-parts) support
All /system applications updated to latest available
Bloatware fully optional
You need:
Jelly Bean Firmware/Bootloader
Acer Iconia Tab A700 with an unlocked bootloader
ClockworkMod Recovery - 6.0.1.5 or newer
How to flash:
Download ROM and place it on your virtual (internal) SD card
Boot your phone into ClockworkMod Recovery (via adb or with a key combo)
In main menu, select "install zip from sdcard"
Select "choose zip from sdcard" and browse to the location of iconiaN rom
After flashing process is complete, reboot the device.
Make sure bootloader was not relocked during update if A700 fails to boot
Download:
iconiaN 2.6 MD5: 068f8b75db88c15859f2a1619b390264
kernel update Updated kernel with NFS v3
Thanks to:
Moscow Desire
pawitp
mike1986
chainfire
meier2009
Bluewall for initial work on the logo
plus all those who helped to crack open the A700
If the interests of following the GPL,
kernel source is on github
Change Log
v2.6:
Rom: Fixed storage names -they are now back to stock /mnt/external_sd etc
Kernel: Fixed loading of NTFS & exFAT Modules
v2.5.1:
Rom: Updated USB Network Device support
v2.5:
Rom: Updated GameLoft Fix for better compatibility
Rom: Removed Solid Explorer
Kernel: Added CIFS support
Kernel: Added USB Network Device support (Currently iPhone's don't work using USB Tether)
v2.4:
Rom: Fully integrated exFAT & NTFS support
Rom: Fixed NTFS partition support (again)
Rom: Fixed AcerUI and GameLoft Fix incompatibility
v2.3:
Fixed BootLoop (Not happening on my device)
v2.2:
Rom: Fixed NTFS partition support
Rom: Implemented exFAT partition support
System: Fixed Play not allowing some games to install (Gameloft)
System: Fixed missing "Talk" app
Kernel: iconiaN v0.1 - Non OC version
v2.1:
Fixed Region Change
Removed all non google apps that are free on Play
Reverted back to 4.1.1 Google apps
v2.0:
Based of RV18RC01_EMEA_GB
Fixed Optional 4Way Reboot Mod
Firmware update added back to installer
Few more tweaks to improve system performance & battery life
v1.3:
Fixed System Info showing "Unkown"
Optional 4Way Reboot Mod - Thanks meier2009
Latest 4.2 Google Apps (Not Camera - does not work well)
v1.2:
Updated to RV16RC01
Fixed issue with paid apps and removal of Mass Storage
Updated Superuser
Gmail 4.2 (swipe to delete and pinch to zoom)
iconiaN kernel - 1.4GHz and NTFS RW
Option to install all the original Acer apps.
v1.1:
Removed all Acer bloat
Removed use of flexrom.img
Firmware update now seperate
Cleaned up install script
Stock apps & icons from Nexus 7 (Might have missed a couple)
Ability to choose GB or DE build.prop info
More tweaks added to aroma
Flash Player
Optional apps moved to /data to allow easy uninstalling
A place to say thanks to those who have donated to iconian
ExtremeRyno
OCmylife
Sounds great! Any chance of including A701 devices in this project?
Congratulations on the Release!
farazjk said:
Sounds great! Any chance of including A701 devices in this project?
Click to expand...
Click to collapse
I can't as I only have a A700 and would not like to risk putting something out on the internet I have not used & tested myself.
Maybe someone with a A701 will take up the task and do something similar.
Moscow Desire said:
Congratulations on the Release!
Click to expand...
Click to collapse
Thank you, I hope it works ok
Vorbeth said:
I can't as I only have a A700 and would not like to risk putting something out on the internet I have not used & tested myself.
Maybe someone with a A701 will take up the task and do something similar.
Click to expand...
Click to collapse
Well, we will have to compare notes. I'm sitting on a fully de-odexed version as we speak
Just have to get the time.
MD
Sorry for asking. But what do you mean by JB firmware? Where do I get it?
Jelly Bean firmware, ie bootloader touch screen firmware etc.
Its included the Rom gives you the option to install it.
Sent from my EndeavorU using xda app-developers app
So I basically need to install this ROM. I have already flashed CWM 6.0.1.5 Great
Yeah just choose the option of bootloader install.
It asks you
Sent from my EndeavorU using xda app-developers app
Class Rome, that helps some as hanging between ICS and JB and not come vorran. You might want the install guide yet to explain how the first query is to use.
- Users with JB 4.1.1 pick the one
- Users with ICS 4.0.4 the second
Saves a few unnecessary questions and confusions.
Fooox1 said:
Class Rome, that helps some as hanging between ICS and JB and not come vorran. You might want the install guide yet to explain how the first query is to use.
- Users with JB 4.1.1 pick the one
- Users with ICS 4.0.4 the second
Saves a few unnecessary questions and confusions.
Click to expand...
Click to collapse
It was tired when I uploaded the Rom, should have a better guide online tonight.
Sent from my EndeavorU using xda app-developers app
THX alot for this Rom
will down it at home an look into it.
do you think it will be a problem to put the EMEA_DE JB Files into it?
should only change the systemfiles one to one
meier2009 said:
THX alot for this Rom
will down it at home an look into it.
do you think it will be a problem to put the EMEA_DE JB Files into it?
should only change the systemfiles one to one
Click to expand...
Click to collapse
Should be fine, Can you link me to those, I want to compare them to see what is different.
Difference between UK & US is regional setting's and the UK one is a slightly newer build.
Installed just fine on my US A700. The only thing that I had to do was say yes to the new firmware, even though I was already on the new OTA JB release.
Very nice... I actually transitioned to the CM10 nightlies release, but awesome job.
Sent from my A700 using xda premium
Vorbeth said:
Should be fine, Can you link me to those, I want to compare them to see what is different.
Difference between UK & US is regional setting's and the UK one is a slightly newer build.
Click to expand...
Click to collapse
Please look here:
http://global-download.acer.com/GDF...TAB&Step3=A700&OS=a10&LC=de&BC=Acer&SC=EMEA_8
Or go to download site
Gesendet von meinem A700 mit Tapatalk 2
---------- Post added at 11:36 PM ---------- Previous post was at 10:39 PM ----------
hi there,
i´ve installed the rom for testing purpose and it works very nice , thank you !!!!!
About the rom:
Android 4.1.1 (Jelly Bean) - Based on latest RV10RC01.EMEA.GB
Click to expand...
Click to collapse
if i look in settings i see this : Acer.AV051.A700.RV09RC07.EMEA.DE
so for me it looks like it´s the same as available on Acer.DE OS Download Site.
maybe it put´s this inside when you select DE as Language and Country
Update:
okay, i reinstalled it again, now i chosed English and UK and also had Acer.AV051.A700.RV09RC07.EMEA.DE
is this a fault of my device or what
meier2009 said:
hi there,
i´ve installed the rom for testing purpose and it works very nice , thank you !!!!!
if i look in settings i see this : Acer.AV051.A700.RV09RC07.EMEA.DE
so for me it looks like it´s the same as available on Acer.DE OS Download Site.
maybe it put´s this inside when you select DE as Language and Country
Update:
okay, i reinstalled it again, now i chosed English and UK and also had Acer.AV051.A700.RV09RC07.EMEA.DE
is this a fault of my device or what
Click to expand...
Click to collapse
Did you install the bootloader/firmware?
I think that maybe the difference as that is shown under image version.
I've done a compare on the UK & DE roms, I need to find a way of extracting flexrom.img to compare more.
Although I can confirm the "Acer.AV051.A700.RV09RC07.EMEA.DE" is in the flexrom.img
no, i was on stock jb before
and direktly before i install it i was on CM10 with all wipes and show´s on settings:
http://www.android-hilfe.de/attachm...verfuegbar-uploadfromtaptalk1351032309492.jpg
so i do not think there were still leftovers from the Stock JB OS, because it also was not shown on Info Page!
i will try another install WITH firmware install option
---------- Post added at 12:27 AM ---------- Previous post was at 12:14 AM ----------
okay, now i have RV10....
but WHY? were are the leftovers from the os before? :what:
With the help of Vorbeth I could manage to install this image. Thx one again.
Now I noticed one strange thing. When I want to reoot into recovery, it just shows the option to turn off. I don´t have the option to restart, to boot into bootloader or recovery. So i thought to boot into fastboot and flash the CWM 6.0.1.5 from pawitp. But there was an error message "FAILED (remote: Invalid Partition Name.)". When I want to reboot the Acer Logo animation shows up an remains in a boot loop. What can I do now and why can´t I flash the CWM?
Presenting
SuperStock18 V1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Smooth, JellyBean-ish and better
Features
Deodexed
Adrenaline Script
Beats Audio
Zip Aligned
New bootanimation
Project butter
Google Now
No more Ads (Adaway)
Pre rooted and SuperSU
Smoother and faster
build.prop tweaks
init.d support
JB launcher
This is my first Custom ROM and I hope you like it.:cyclops: :victory:
Procedure
http://www.droidextra.org/2013/01/19/custom-rom-for-karbonn-a18-superstock18.html
Click to expand...
Click to collapse
Hey Thanks for your efforts man! Its really appreciated.... Is the audio as good as it was in the MiUi one?? Or is it the same like the stock rom?
Ooops Almost forgot to Thank you there
sahil kaul said:
Hey Thanks for your efforts man! Its really appreciated.... Is the audio as good as it was in the MiUi one?? Or is it the same like the stock rom?
Ooops Almost forgot to Thank you there
Click to expand...
Click to collapse
Glad you liked the ROM. The volume is same as the Stock ROM but the quality is much better.
Will this work on Micromax A90 too? Is it safe to try it on the A90?
Or can you please build one for the A90, it's a sincere request.
And can you build it on Jellybean?
What's the Stock launcher. Or any launcher inclided
Don't Forget To Press Thanks.
AbhishekS said:
Will this work on Micromax A90 too? Is it safe to try it on the A90?
Or can you please build one for the A90, it's a sincere request.
And can you build it on Jellybean?
Click to expand...
Click to collapse
No It will not work on A90. I cannot build JB until I have full MT6575 kernel source.
Project Young said:
What's the Stock launcher. Or any launcher inclided
Don't Forget To Press Thanks.
Click to expand...
Click to collapse
I have included the JB launcher.
ujjwalk308 said:
No It will not work on A90. I cannot build JB until I have full MT6575 kernel source.
Click to expand...
Click to collapse
Okay. If not JB, then can you port this ROM itself to A90?
Sent from my Galaxy Nexus using Tapatalk 2
AbhishekS said:
Okay. If not JB, then can you port this ROM itself to A90?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I can do it if I have the device.
Custom roms
droidextra said:
Presenting
SuperStock18 V1
Smooth, JellyBean-ish and better
Features
Deodexed
Adrenaline Script
Beats Audio
Zip Aligned
New bootanimation
Project butter
Google Now
No more Ads (Adaway)
Pre rooted and SuperSU
Smoother and faster
build.prop tweaks
init.d support
JB launcher
This is my first Custom ROM and I hope you like it.:cyclops: :victory:
Procedure
Click to expand...
Click to collapse
hi,
More custom Roms are available in Russian forum.. for Star N8000, Haipai i9220, dapeng A9230+.
These devices specifications match with Karbonn A18 specifications. I am sure that, you will not get device brick, If you flash these.
But do it on your own safety. I have tested above 10 firmwares from russian forum, here - http://forum.china-iphone.ru/viewforum.php?f=46
in my NXG Phablet (Dapeng A9230+). There is no device brick for me (Gods grace) , while flashing through Clockworkmod recovery.
But (you know that), you have to keep your device's boot kernel for test those Roms.. Use your device boot image for use with following ICS 4.0.6 custom Rom
http://rusfolder.com/32791255
replace your Karbonn a18 ics boot image with the downloaded file. (Unzip and replace boot image and Rezip for flashing through Clockworkmod recovery)
for detail go here - russian foum for Star N8000 (use google translate) - http://forum.china-iphone.ru/viewtopic.php?p=659135#p659135
If you have MIUI and Lewa Boot kernels, (modified for your device), you can test MIUI and Lewa ROms in my following thread through CWM recovery.
http://forum.xda-developers.com/showthread.php?p=32932373
Anyway you can get more MTk6575 ROms here from Russian forum - http://forum.china-iphone.ru/viewforum.php?f=46
HAPPY FLASHING.
ramsuresh4 said:
hi,
More custom Roms are available in Russian forum.. for Star N8000, Haipai i9220, dapeng A9230+.
These devices specifications match with Karbonn A18 specifications. I am sure that, you will not get device brick, If you flash these.
But do it on your own safety. I have tested above 10 firmwares from russian forum, here - http://forum.china-iphone.ru/viewforum.php?f=46
in my NXG Phablet (Dapeng A9230+). There is no device brick for me (Gods grace) , while flashing through Clockworkmod recovery.
But (you know that), you have to keep your device's boot kernel for test those Roms.. Use your device boot image for use with following ICS 4.0.6 custom Rom
http://rusfolder.com/32791255
replace your Karbonn a18 ics boot image with the downloaded file. (Unzip and replace boot image and Rezip for flashing through Clockworkmod recovery)
for detail go here - russian foum for Star N8000 (use google translate) - http://forum.china-iphone.ru/viewtopic.php?p=659135#p659135
If you have MIUI and Lewa Boot kernels, (modified for your device), you can test MIUI and Lewa ROms in my following thread through CWM recovery.
http://forum.xda-developers.com/showthread.php?p=32932373
Anyway you can get more MTk6575 ROms here from Russian forum - http://forum.china-iphone.ru/viewforum.php?f=46
HAPPY FLASHING.
Click to expand...
Click to collapse
Any developing news on this??
Shiv Prajapati said:
Any developing news on this??
Click to expand...
Click to collapse
Try the custom ics roms from my signature link.
(My xfab thread). Replace your current or stock boot.img in the downloaded ics roms and flash through clockwork mod recovery.
While flashing through clockwork mod recovery, it will not brick your device. Always have a current rom backup.
Flashing other mobile roms through smartphone flashtool is a risky way. Don't try. But, flashing through Clockwork mod is not a risky way and it won't brick your device.
So, if you want, try from my xfab thread.
Sent from my Dapeng A9230+ through XDA mobile.
ramsuresh4 said:
Try the custom ics roms from my signature link.
(My xfab thread). Replace your current or stock boot.img in the downloaded ics roms and flash through clockwork mod recovery.
While flashing through clockwork mod recovery, it will not brick your device. Always have a current rom backup.
Flashing other mobile roms through smartphone flashtool is a risky way. Don't try. But, flashing through Clockwork mod is not a risky way and it won't brick your device.
So, if you want, try from my xfab thread.
Sent from my Dapeng A9230+ through XDA mobile.
Click to expand...
Click to collapse
thank u sir
Mediatek MTK6575 Jelly Bean (4.1) Kernel source code
droidextra said:
No It will not work on A90. I cannot build JB until I have full MT6575 kernel source.
Click to expand...
Click to collapse
i found source code of mtk 6575..
it is belongs to " Acer Z120 "
to get the source code u need to check this link provided below...
Mediatek MTK6575 Jelly Bean (4.1) Kernel source code - Jelly Bean Kernel source code for MTK6575
Origin:
1. Go http://us.acer.com/ac/en/US/content/drivershttp://global-download.acer.com/GDFiles/Document/App.%20Guide/App.%20Guide_Acer_1.0_A41J_A.zip?acerid=635028256709199782&Step1=SMARTPHONE&Step2=Z%20SERIES&Step3=Z120&OS=ALL&LC=en&BC=ACER&SC=PA_6
2. Select Smartphone -> Z Series -> Z120
3. Push to Documents and download Kernel source code
for Kernel cource...http://global-download.acer.com/GDFiles/Document/App.%20Guide/App.%20Guide_Acer_1.0_A41J_A.zip?acerid=635028256709199782&Step1=SMARTPHONE&Step2=Z%20SERIES&Step3=Z120&OS=ALL&LC=en&BC=ACER&SC=PA_6
Update
Hi Sir, thank you for yr efforts. N schedule to port it with the jb 4.1 kernel?
Rgds,
;
XoloLiquid v2.0 ROM for Xolo Q800, Fly IQ446, Gionee gn708w, AllView P4 Quad, Symphony Xplorer W125
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About
XoloLiquid is for those users who want an AOSP/Vanilla experience, demand performance and expect stability!
[*]XoloLiquid is based on the latest International Jellybean 4.2.2 Base and is De-Odexed!
[*]XoloLiquid is Fast, Clean, and STABLE!
Click to expand...
Click to collapse
Features
Pure AOSP Experience
Android v4.2.2
Performance optimizations
Quick & fast UI
Proper Default App Background (Holo Dark, no more solid black background in settings) and Fixed Artifacts in Notification Bar unlike other vanilla ROMs
CRT Screen off animation
Float Caller
Additional Unlock Options/Shortcuts (Unlock, Search, Camera)
Dual Mic Noise Reduction
Full Developer Options
Pre Rooted
Deodexed
Busybox installed
Init.d support
Full Gapps
Google Boot Animation and SunBeam live wallpaper from HTC One / SGS4 Google Edition firmware
Cyanogenmod Calculator and cLock
ViPER4AndroidFX for better sound/music quality. For details please visit ViPER4Android Thread
How to Install
Prerequisite: CWM or TWRP Custom Recovery.
1) Wipe Data/Factory Reset, Wipe System
2) Flash the ROM in the custom recovery.
3) Flash Storage_Fix zip. Done !
NOTE: Long Press HOME to open Search & Long Press BACK to open Recent Apps
Credits
Me
Back37
Cyanogenmod Devs
Viper520
Acer & Gionee Devs
Google
Sources Here
DISCLAIMER: I know you guys already know this but it's just one of those things you gotta say anyway: Bad things can happen to your phone when you flash custom ROMs and mods.I am not responsible if anything bad happens to you, your associates, or your device by flashing this ROM.
.
Download Here (Hit THANKS if you liked my work)
Storage Fix
Changelog
20-08-13: v2.0:
-Android version updated to v4.2.2
-Performance optimizations
-Float caller added
-Fixed Vibrate during silent bug
-Fixed DTS notification bug
-Deodexed
-Busybox added
04-07-13: v1.0:
Initial Release
Download Here
Known Issues
-None
(For Storage showing swapped in Settings and to enable apps to SD please flash Storage_Fix given above)
Screenshots
#Reserved
any major issue like basic phone features or wifi
kartikoli said:
any major issue like basic phone features or wifi
Click to expand...
Click to collapse
Its almost bug free and stable, just few minor issues as listed above in known issues.
NOTE: Long Press HOME to open Search & Long Press BACK to open Recent Apps
... BUT why?... everything else on this ROM is perfect.. please tell me how to change back to long press home for recent apps?.. WERE ALL USED TO IT.
[email protected] said:
NOTE: Long Press HOME to open Search & Long Press BACK to open Recent Apps
... BUT why?... everything else on this ROM is perfect.. please tell me how to change back to long press home for recent apps?.. WERE ALL USED TO IT.
Click to expand...
Click to collapse
Will be fixed in next release.
Camera???
Hey man, I noticed the camera app shows 6M in resolution. Should'nt it be 8MP???
papubhai said:
Hey man, I noticed the camera app shows 6M in resolution. Should'nt it be 8MP???
Click to expand...
Click to collapse
Change aspect ratio from full screen to 4:3 and 8MP will be available.
new xolo q800
OK so the new Xolo are coming with downgrade processor I dunno which processor is mine but still will it work if not what file should I use it to make it work
Will this work on Q800 with mtk6589w-m processor?
I'm interested in trying this ROM.
ebe_robert said:
Will this work on Q800 with mtk6589w-m processor?
I'm interested in trying this ROM.
Click to expand...
Click to collapse
Don't know about mtk6589w-m, u can try n tell us (it'll not harm ur phone)
shubhamjain001 said:
Don't know about mtk6589w-m, u can try n tell us (it'll not harm ur phone)
Click to expand...
Click to collapse
Tried it.. The phone was stuck at boot logo for 15-20 mins, Is it normal??
Anyway.. I removed the battery, rebooted into recovery and restored my backup.. So no damage done
Hi Shubham,
My phone just using your custom rom for about 30 mins.
I really enjoy your work. So far I found no issue.
Actually I use rebranding phone from Xolo Q800 called Polytron W7450 in Indonesia.
And your custom rom work flawlessly.
I can't wait your next rom.
Keep up your great work!
Thanks
Change camera storage
Hi Shubham,
Usually in camera setting I can change the storage setting from Phone into SD Card.
But I could not find it now.. how can I change the setting into SD card?
Hi guys!!!!!
I Just Ordered Q800(The One With Mtk 6589m)
We Have Kernel Sources So I am Gonna Try To Compile A Kernel For Q800
WIl Try To Port Cm10.1 To Our Devices
thanks at above
Please launch this ROM and of you can cm or pacman I will be very grateful fell me if I can anyhow help I aint a dev but still am smart lol
adeeb222 said:
Please launch this ROM and of you can cm or pacman I will be very grateful fell me if I can anyhow help I aint a dev but still am smart lol
Click to expand...
Click to collapse
Still waiting for my phone to be shipped
Sent from my Xolo A700 using xda premium
ok
Pls start the work asap whenever the phone reaches
...
You got the phone yet if not have you ordered it from Flipkart contact em cause they deliver too fast
This rom is a free, community built, aftermarket firmware distribution of Android 4.2 (JB) over 4.1, which is designed to increase performance and reliability over stock Android for your device.
Code:
CODE NAME :- FeatherLiteEdition JB 4.2.2. By Shivam Bhalla
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
FEATHER LITE EDITION
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FEEL THE EXPERIANCE AS LITE AS A FEATHER
First time installing to your Micromax A90s/Blu Vivo 4.3, or coming from another ROM:
- Make sure you're NOT RUNNING A ICS KERNEL or you will brick your Device..
- Make sure you're running a proper working CWM TWRP or COT.
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Copy ZIPs to your SDCard
- Boot into Recovery
- Flash zip from SDCard
- Reboot
Changelog
Code:
<#>Changelog Stable 1.0_Lite (October 13 2013)</#>
<*>Removed GAPPS Minimal Package</*>
<*>Added Nemus Launcher</*>
<*>Improved the Power ON sensor delay</*>
<*>Fixed some broken Play Store permissions</*>
<*>Improved Wi-Fi module</*>
<*>Improved BT module</*>
<*>Fixed Camera autofocus</*>
<*>Fixed default device/BT/Wi-Fi names</*>
<*>Added Engineer Mode section on the Settings</*>
<*>Other small fixs</*>
<*>Added V6 Scripts:</*>
<*>- Patch android services</*>
<*>- Better battery life</*>
<*>- Wifi tweeks</*>
<*>- Etc</*>
<*>fixed re-calibrate proximity sensor</*>
<*>Aroma Installer</*>
<*>Support for both userdata partitions, extended and default</*>
<*>Removed Support for other langs</*>
<*>Added 3 ways Reboot, on power button</*>
<*>FIX External SD</*>
<*>FIX Bluetooth</*>
<*>FIX Radio</*>
<*>FIX GPS</*>
<*>Added Lightening Browser as default Browser</*>
<*>Minimal Ringtones Added</*>
<*>3G Switching removed due to FC in changing sims mode</*>
<*>Best Camera Quality in DayLight</*>
Download ROM
CLICK HERE
MINIMAL GAPPS PACKAGE
CLICK HERE
Note: Rom is based on Jiayu G3 & the original AMOI N820, so if there is some issue so dont forget to discuss.
THIS IS A WORK OF ALL DEV OF Micromax & ZTE for other devices so all credits goes to them as per Credits section Here
Special Thanks to Dark4Droid for still giving hopes to A90s Users
Screenshots
screenshots
P A T C H
SD Card SWAP FIX
DOWNLOAD LINK
Note: Simply flash it through recovery DONT WIPE anything.
If mobile struck on boot logo simply remove battery and insert again and restart
This can be occurd due to change in partition script.
Awesomeness ROM
This ROM is really speedy and light. :angel:Love the Nemus Launcher...all basic (useful) functionalities available yet light on resources and speedy! Cheers...This ROM is gonna stay on my phone for a long time.:good:
4.2.2
is this real android 4.2.2 ? or 4.1.1 themed ?
real 4.2.2
nimo1996 said:
is this real android 4.2.2 ? or 4.1.1 themed ?
Click to expand...
Click to collapse
its 4.2.2 ..
@shivam- its exactly that i wanted. SIMPLY GREAT. first boot up free ram is more than 220 MB!!!
few things though
1- incoming call volume is lower than stock ROM. i can change through engineering mod but can u please check the reason?
2- Nemus is taking around 30 mb ram, i think that stock jb launcher will use lower RAM.
3- what are the fonts that you used? they are good.
ROM is very stable. no issue with themes or anything so far. :fingers-crossed:Kudos ..
warm regards
ankjain
ankjain said:
its 4.2.2 ..
@shivam- its exactly that i wanted. SIMPLY GREAT. first boot up free ram is more than 220 MB!!!
few things though
1- incoming call volume is lower than stock ROM. i can change through engineering mod but can u please check the reason?
2- Nemus is taking around 30 mb ram, i think that stock jb launcher will use lower RAM.
3- what are the fonts that you used? they are good.
ROM is very stable. no issue with themes or anything so far. :fingers-crossed:Kudos ..
warm regards
ankjain
Click to expand...
Click to collapse
Nemus is more better than stock , as i have seen stock takes sometimes more than 42 Mb when using time to time its size increases,when you restart you will see loss in its size as i have tested many launchers i found this the lightest with all type of feature which stock doesnt have rest is on you all as its your ROM customise the way u like and fonts are taken from 4.3 JB and realy looking awsome with this ROM. Well it takes lots of headache in making it stable and less in size many times i got bootloop i have to fix lots of misbehavior's due to lack of drivers etc. Buddy its really not so ease to make a ROM it takes lots of time and patience.But when I get motivated by people like you it boost me more to give you all best I can do.
nimo1996 said:
is this real android 4.2.2 ? or 4.1.1 themed ?
Click to expand...
Click to collapse
MAN ITS REAL ANDROID 4.2.2
BROUGHT TO US BY @Dark4Droid and stablized and fixed by ME
and also I cant forget the person @superdragonpt
Great job bro, proved yourself once again. BTW the font used is roboto condensed? I've been using it for more than a year now, so I'm not sure if its from JB 4.3, as I've never used the OS... Please correct me if I'm wrong.
YanOri said:
Great job bro, proved yourself once again. BTW the font used is roboto condensed? I've been using it for more than a year now, so I'm not sure if its from JB 4.3, as I've never used the OS... Please correct me if I'm wrong.
Click to expand...
Click to collapse
The font is Helvetica Neue
sachin273 said:
The font is Helvetica Neue
Click to expand...
Click to collapse
Thanks for correction.
YanOri said:
Great job bro, proved yourself once again. BTW the font used is roboto condensed? I've been using it for more than a year now, so I'm not sure if its from JB 4.3, as I've never used the OS... Please correct me if I'm wrong.
Click to expand...
Click to collapse
well you and sachin both are correct about font name even I didnt used 4.3 till now but from where i got it ,it has prescribed it as JB 4.3 Fonts so even am not much clear about fonts but what we have to do with this, its looking cool although so enjoy the ROM and its sleekness smoothness and liteness.
Shivam Bhalla said:
well you and sachin both are correct about font name even I didnt used 4.3 till now but from where i got it ,it has prescribed it as JB 4.3 Fonts so even am not much clear about fonts but what we have to do with this, its looking cool although so enjoy the ROM and its sleekness smoothness and liteness.
Click to expand...
Click to collapse
Haha, yeah, that's the thing.
@ankjain
Please go through following link as you talked about launcher, this is the lightest launcher till date according to me ,download it and install as its very small in size so don't expect much
Here you Go
ICS kernel?
I am using Zhao touch rom, kernel version 3.0.13....can I flash this rom on my present rom?
Am I using ICS kernel?
imloy said:
I am using Zhao touch rom, kernel version 3.0.13....can I flash this rom on my present rom?
Am I using ICS kernel?
Click to expand...
Click to collapse
Zaho touch is based on ICS buddy
imloy said:
I am using Zhao touch rom, kernel version 3.0.13....can I flash this rom on my present rom?
Am I using ICS kernel?
Click to expand...
Click to collapse
No man please dont flash it on ICS your phone will not boot at all.
Follow this thread and flash JB firmware first :
HERE YOU GO
Possibility of Ubuntu Touch
Hi guys!
was browsing though forums and found the following link...
http://forum.xda-developers.com/showthread.php?t=2182442
These many devices have Recieved Ubuntu touch port... i am just curious what are the possibilities of having it on our device.
I know we need Kernel sources specifically for our device ... but hey we said that about Jellybean too when we were on ICS.
But due too awesome work of devs from all over the globe we could get JB 4.1 (by Blu's update) and now we are running 4.2.2...
If we collaborate with other devs we might get some help or insight in this matter.
I just know that Ubuntu ports are based on Cyanogenmods and we dont have one...but other devices too using MTK have got possibility of ubuntu ports (such as Canvas HD...it is in the list)... i am no expert.
However i just wanted to understand the degree of difficulty in achieving this though discussion.
anchit_89 said:
Hi guys!
was browsing though forums and found the following link...
http://forum.xda-developers.com/showthread.php?t=2182442
These many devices have Recieved Ubuntu touch port... i am just curious what are the possibilities of having it on our device.
I know we need Kernel sources specifically for our device ... but hey we said that about Jellybean too when we were on ICS.
But due too awesome work of devs from all over the globe we could get JB 4.1 (by Blu's update) and now we are running 4.2.2...
If we collaborate with other devs we might get some help or insight in this matter.
I just know that Ubuntu ports are based on Cyanogenmods and we dont have one...but other devices too using MTK have got possibility of ubuntu ports (such as Canvas HD...it is in the list)... i am no expert.
However i just wanted to understand the degree of difficulty in achieving this though discussion.
Click to expand...
Click to collapse
Buddy without kernel sources its impossible for us to build anything as am strucked on my kernel work due to lack of RIL and display drivers(got the driver but still not working) and also touch drivers , although if Canvas HD got Ubuntu Touch ported for it I(we) need to work a lot to make it stable for our devices.
However I will look into this if got any success I will let you all know. :good::victory:
One change required. It detects internal sd card as primary.. Please make it recognise external sd card as primary.