Return to Contents Page - doubleshot Developers Reference
THESE ARE NOT ROMs. ...and this thread is not aimed at users.
These are the base of what could be a ROM some day if someone wants to make them into such.
Provided as-is with no promise of support or usability ( but you know we're here for that if you need it, and they worked fine on my device )
HTC Software Versions: (March 2012)
1.28.531.9 - Retail Launch
1.55.531.3 - OTA
1.63.531.2 - OTA
--------
Okay, yesterday I tore open the 1.63.531.2 software package and started seeing what I could see.
While I was playing with it I made another round of insecure boot images ( find here )
...one thing led to another and then here I sat with 3 de-odexed system images and corresponding insecure boot.img files I had made, and a sunrise that was surprising because I hadn't realized it had set yet from the day before...
Anyways, I had fun with this project and hopefully having these here will encourage people to start tinkering with their own ROM creations.
These base system.img files are the same system.img files generated when you make a clockworkmod backup - so no goofy headers or signed stuff to worry about, just the image file.
You can unyaffs it like normal to get at the contents of the image.
If you are on windows, avabox is a fantastic set of tools with a full yaffs setup in it, as well as the easiest smali/backsmali process i've found. Top notch tool and one I use frequently when on windows.
I actually did the de-odexing itself with xUltimate - it went ahead and did it all in one automatic batch process for each software version when I got to that part, instead of me manually doing it with avabox or other backsmali tools. (Nice!!)
Even so, it still took most of the night to set up and then process each software version and de-odex it, so i'm providing them here for people to just grab and start working on.
So, to answer that question of "where do I start?" for getting into developing, here is a pretty good place:
HTC 1.63.531.2 Software Version
The new OTA software version that started on the 19th and was paused (again...) on the 20th of march is the 1.63.531.2 software version, our newest.
De-odex system.img 1.63.531.2
doubleshot_1-63-531-2_de-odexed_system.img
Download Link
MD5: 40f11628907899aebe5809808f56f2ae
Size: 697.75 MB
Insecure boot.img 1.63.531.2
doubleshot_1-63-531-2_insecure_boot.img
Download Link
MD5: 1939ec22b1414cb7b4e42f07f1d6b025
Size: 3.36 MB
----
HTC 1.55.531.3 Software Version
De-odex system.img 1.55.531.3
doubleshot_1-55-531-3_de-odexed_system.img
Download Link
MD5: 154a793b92d69970554170832f6efca6
Size: 691.8 MB
Insecure boot.img 1.55.531.3
doubleshot_1-55-531-3_insecure_boot.img
Download Link
MD5: 3e07acc5debd7f9f469d31486aa7c87d
Size: 3.36 MB
----
HTC 1.28.531.9 / .10 Software Version
HTC 1.28.531.10 kernel source
De-odex system.img 1.28.531.9
doubleshot_1-28-531-9_deodexed_system.img
Download Link
MD5: 7a250cc5d6783c9392c826a01beb7b03
Size: 682.62 MB
Insecure boot.img 1.28.531.9
doubleshot_1-28-531-9_insecure_boot.img
Download Link
MD5: b83a232372f6d8e440446f255aaea617
Size: 3.28 MB
----
Other versions of the boot.img found here. Also shows what code was changed to make it insecure.
If you lose the modules needed to make wifi work with the boot image, these are stock boot images and can get those modules from here if they are lost from system:
Stock WiFi Modules
--------
Mirrors welcome, just please make sure to include a link in this thread if you do ( I will copy it to first posting for others reference) and just make sure to link to the thread and not the mirrors direct elsewhere please?
Good places to go next from here would be:
- Edify Script Tutorial - Replacing the Google Market
- Edify Scripting Notes
- Flashable zip template
- doubleshot Developers Reference
...and start to learn how to set up the stuff you make so you can deploy it to a device.
Happy devving!
Blue6IX said:
I actually did the de-odexing itself with xUltimate - it went ahead and did it all in one automatic batch process for each software version when I got to that part, instead of me manually doing it with avabox or other backsmali tools. (Nice!!)
Click to expand...
Click to collapse
This angers me that you got this to work when it didn't work for me at all. Great rage.
Recently i was given an android device by a friend.. once i got to looking around at it, it appears to be some generic device from china.
After searching for days, i found the maker as fugetek. I emailed them asking for a release date on OS upgrade (from 4.1.1 -> kitkat) and was informed that " Updates are needed, and won't be made. "
Emailed them again asking for the source / project files they used to build the android OS for this device so i could update it myself...
Here is what they sent me:
(image attached)
As you can see.. these are hardly project files / source files, but rather a flashing tool, a set of " how to " doc's for flashing the device, and a compiled *.img
My Question:
1) Is it possible to extract / mount the img file, and manually upgrade the OS to kitkat witout losing any hardware functionality
2) If it is indeed possible to upgrade the android OS version using the img file as src, does anyone know of a step-by-step guide / tutorial on how this is done.
[EDIT] UPDATE: Seems the PheonixUSBPro flashing utility links to an " Alwinner " PDF when you click help..
I am assuming this is pretty much the same image being passed around by the chinese for their generic 7" Android Devices
From what i'm reading.. this is going to a fun, and somewhat convoluted project
Device Details:
Manufacturer: Fugitek Technologies / Lonestar Group:
Model: OCOCCI_MID
Android: 4.1.1
Baseband: jellybean
Kernel Version:
308+
[email protected] #206
Mon Nov 4 14:17:42 CST 2013
Build Number:
nuclear_pfdq88d-eng 4.2.2 JRO03C 20130913 test-keys
Any help would be most appreciated
If anyone requires the " source " zip they sent me, let me know, and i'll upload it somewhere for you.
Hi guys, im not a noob when it comes to rooting but this new tablet is giving me a headache and i dont know what to do now.
So far, I have tried many one click apps, even ones for the pc... Even chinese ones and nothing has managed to root it.
Here is the device details...
About My Device
Android ID: 2c8b057eec19358a
SIM Serial Number: Unavailable
Wi-Fi MAC Address: cc:d2:9b:b4:d1:ea
Bluetooth Address: CC2:9C:B41:EA
IP Address: 192.168.0.7
International Mobile Station Equipment Identity (IMEI): Unavailable
International Mobile Subscriber Identity (IMSI): Unavailable
Internal Memory Status: Available: 3GB | Total: 4GB
External Memory Status: Available: 3GB | Total: 4GB
Manufacturer: UNKNOWN
Model Number: PNDPP44Q7GPBLK
Android Version Name: KITKAT
Android Version: 4.4.2
SDK Version: 19
Build Number: A31S_Q72_Q721HB3C_PG.20140618
Screen Density: Standard/Medium Density (MDPI)
Any advice on how to obtain root would be fantastic.
Update
Right, I read on another forum about Chinese phones and tablets with a certain type of chipset can have the firmware / rom copied directly from the device in the form of a scatter file which you then use to create the image on your pc.
I already tried the tools but unfortunately, the software is not compatible with my tablets hardware.
I have now sent an email to the manufacturer explaining that my tablet is stuck in a bootloop and even the reset pin and recovery modes won't work and have requested a copy of the original firmware to flash to my device.
If I am successful in obtaining a copy of the firmware / rom, is there a guide explaining how to modify it in order to root it and how to make a recovery compatible with my device.
At the moment, this is all relying on me getting the firmware / rom from the manufacturer but, if I am successful, I will share my modded + rooted rom with the rest of xda.
While I am waiting for a response from the manufacturer, does anyone know if it is possible to "rip" the current rom / bootloader / etc from the tablet, just in case they don't send me the files I requested?
Any news on this at all? I have an 8inch cello win 8 tablet that won't start up so any future info on cello tablets would be handy.
Any news?
BLU Grand X3+
Dual-SIM GSM Smartphone
C110 / C5 2019
Android 8.1.0 Oreo (Go Edition)
Stock Firmware Package (PAC File)
DISCLAIMER:
Installing stock firmware or any other type of ROM on your Android device carries with it an inherent risk of bricking or otherwise rendering your device completely inoperable. This thread is a resource only for downloading stock firmware and files necessary for installation. By proceeding further, you are assuming sole responsibility for the integrity and operability of your device. I am not responsible for any good or bad that may result from your use of the files linked below. If you don't know what you're doing, please do some research before undertaking the task of firmware installation. This link gives a step-by-step outline on how to use the SPD Upgrade Tool to properly install stock firmware on your BLU Grand X3+ https://androidmtk.com/flash-pac-stock-rom-android-smartphone
OVERVIEW:
This thread is not intended as a guide or tutorial for installing stock firmware on the BLU Grand X3+. Rather, this is intended as a resource for device owners and developers for downloading stock firmware. After a great deal of searching for this firmware online, I discovered that many sites charge a membership or usage fee for downloading the firmware and, on other sites, Furthermore, anybody that charges a fee for firmware packages -- that are otherwise free of charge on.other repos -- is nothing but a crook. On many of these sites I also found broken and inoperable download links. I was able to dig online and I located one complete firmware package for the BLU Grand X3+. I have uploaded the package to my own cloud storage and I've linked it below to share with others who need it. I am also including links to the latest SPD Upgrade Tool and the Spreadtrum NPI USB Drivers.
BUILD INFO:
•Android Version: 8.1.0 Oreo (Go Edition)
•Build No.
BLU_C110_V8.1.G.03.03_GENERIC_15082019_SPD
•Chipset: Spreadtrum SC7731e
•Kernel Version: Linux 4.4.83
•API Level: 27
•Architecture: armv7l (32-bit)
DOWNLOAD LINKS:
Stock Firmware Package: https://mega.nz/file/2iAmDJIa#_89aIHPx9rq42gII9wCeEQrMc6voOaBxqAhHRneviUo
SPD Upgrade Tool R24.0.0003: https://mega.nz/file/fqA2zBYS#aVBKLZki4VW6eK1jeGk3wpcYXaYhH3BfLxKJsj6MuKE
Spreadtrum NPI USB Drivers v1.4: https://mega.nz/file/q3JEmDBJ#kwyRY926ffAesrxkMTIDfDyiUn77N0bAbpyRxjm0CW0
Phone model: Lebast X14 Promax
Version number: T9312-G2233F-5G-20221201-V1104
Hardware version number: T9312
Baseband version: 4G_MODEM_20A_W21.50.2|sharkl5pro_modem, 4G_MODEM_20A_W21.50.2|sharkl5pro_modem
CPU model: snapdragon855
Number of CPU cores: 8 cores
RAM: 16G
ROM: 512G
Screen resolution: 1600x720
Operating System: FreemeOS
Android version: 11
This is the message displayed in "About phone"
Then I used Kingroot to scan
Mobile information is
Brand: 5G
Phone model: X14
CPU model: Unison T610
Screen resolution: 1456x720
RAM: 15258.79MB
It is said on the Internet that 5G is not supported, but this version is mainly based on 5G. Anyway, I tried to find a lot of Root methods, but unfortunately none of them work. May a root expert please give me a clear direction.
you got scammed bro wtf
w_tapper said:
你被騙了兄弟 wtf
Click to expand...
Click to collapse
Even if it is not 5G, I still want to root it and use it as other software.
May be reflashing the FreemeOS helps
Download Firmware for Unno V6 FreemeOS 2023 - OFFICIAL FIRMWARE
Download Unno V6 FreemeOS Firmware. The firmware file is zipped and inside contains the firmware, ROM installer, USB driver and ROM installation tutorial.
firmwareoficial.com
BTW:
If phone's Linux kernel is version 5.10 and higher you can try to flash KernelSU.
jwoegerbauer said:
可能正在刷新 FreemeOS 幫助
Download Firmware for Unno V6 FreemeOS 2023 - OFFICIAL FIRMWARE
Download Unno V6 FreemeOS Firmware. The firmware file is zipped and inside contains the firmware, ROM installer, USB driver and ROM installation tutorial.
firmwareoficial.com
順便提一句：
如果手機的 Linux 內核是 5.10 及更高版本，您可以嘗試刷新KernelSU。
Click to expand...
Click to collapse
I'll try it out, thanks for sharing
Catbgm said:
Then I used Kingroot to scan
Mobile information is
Brand: 5G
Phone model: X14
CPU model: Unison T610
Screen resolution: 1456x720
RAM: 15258.79MB
Click to expand...
Click to collapse
In future use Device Info to get all the hardware specs
Device Info APK (Android App) - Free Download
Download: Device Info: System & CPU Info APK (App) - ✔ Latest Version: 3.3.3.9 - Updated: 2023 - com.ytheekshana.deviceinfo - Yasiru Nayanajith - deviceinfo.app - Free - Mobile App for Android
apkcombo.com
jwoegerbauer said:
In future use Device Info to get all the hardware specs
Device Info APK (Android App) - Free Download
Download: Device Info: System & CPU Info APK (App) - ✔ Latest Version: 3.3.3.9 - Updated: 2023 - com.ytheekshana.deviceinfo - Yasiru Nayanajith - deviceinfo.app - Free - Mobile App for Android
apkcombo.com
Click to expand...
Click to collapse
I opened it after installation, but jumped out.
jwoegerbauer said:
可能正在刷新 FreemeOS 幫助
Download Firmware for Unno V6 FreemeOS 2023 - OFFICIAL FIRMWARE
Download Unno V6 FreemeOS Firmware. The firmware file is zipped and inside contains the firmware, ROM installer, USB driver and ROM installation tutorial.
firmwareoficial.com
順便提一句：
如果手機的 Linux 內核是 5.10 及更高版本，您可以嘗試刷新KernelSU。
Click to expand...
Click to collapse
jwoegerbauer said:
May be reflashing the FreemeOS helps
Download Firmware for Unno V6 FreemeOS 2023 - OFFICIAL FIRMWARE
Download Unno V6 FreemeOS Firmware. The firmware file is zipped and inside contains the firmware, ROM installer, USB driver and ROM installation tutorial.
firmwareoficial.com
BTW:
If phone's Linux kernel is version 5.10 and higher you can try to flash KernelSU.
Click to expand...
Click to collapse
Catbgm said:
I'll try it out, thanks for sharing
Click to expand...
Click to collapse
I open KernelSU after installation, but it shows
Unsupported
KernelSU now only supports GKI kernels
Core: 4.14.193
Admin version: v0.5.7(10866) Fingerprint:5G/T93115G:11/RP1A.201005.001/1669974822: user/release-keys SELinux state: Mandatory
Because the display is Unsupported, according to the above, you need to compile the kernel yourself.
I checked the unofficially supported devices and saw a similar version number, but there is only one digit difference.
rushiranpise
android_kernel_samsung_exynos9610_mint
Kernel 4.14.194 exynos9610 non-GKI device, added KernelSu using manual method
Would it be more appropriate to use this?
Why waste your time trying to flash pre-compiled KernelSU what isn't suitable to your phone?
Try MagiskSU .
If it's not your goal that applications get provided root access but you - the user - to act like an Administrator in Windows OS then it's enough to add SU ( read: SwitchUser ) binary to Android, IMO.
jwoegerbauer said:
Why waste your time trying to flash pre-compiled KernelSU what isn't suitable to your phone?
Try MagiskSU .
Click to expand...
Click to collapse
In fact, I have installed the magisk, just on the installation, I don’t know how to proceed, I need to select and repair the file, but this phone does not have a file for flashing the phone like a big brand, I also tried to go to the file in the phone I searched for boot-related files and tried to patch and install them, but they couldn’t be installed. I tried to install the magisk in a virtual machine, but even if it was installed, I still need to patch the files to get full permissions.
jwoegerbauer said:
If it's not your goal that applications get provided root access but you - the user - to act like an Administrator in Windows OS then it's enough to add SU ( read: SwitchUser ) binary to Android, IMO.
Click to expand...
Click to collapse
In fact, I want to install the software to get cracked and get restricted functions.
.
@Catbgm
Here you go - Notice: I've not tested it.
Using your phone
A:
Open browser
1. Install SH Script Runner
2. Download Buysbox
Close browser
B:
Open SH Script Runner
1. Create shell script what contains these lines of code
Code:
#!/bin/bash
CPU64=$(cat /proc/cpuinfo | grep 'ARMv8')
if [[ -z "$CPU64"]] ; then
CPU="arm"
else
CPU="arm64"
fi
BB="/data/local/tmp/bb"
mkdir -p -m 777 $BB
cp /sdcard/Download/busybox_1_34_1_ARM/$CPU/bin/* $BB/
rm -r /sdcard/Download/busybox_1_34_1_ARM
mv $BB/busybox $BB/bb
chmod -R u=rwx,g=r,o= $BB/*
alias SU="$BB/bb su"
echo "Testing SU functionality..."
sleep 15 && echo -en '\007'
whoami
echo ""
$($SU)
echo ""
whoami
echo "All done."
sleep 15
exit 0
2. Run the script
C:
Close SH Script Runner