In all tutorials I found this lines:
cd ~/android/system/device/htc/dream_sapphire/
./extract-files.sh
But i haven't ANY files in this directory(including this scipt). Can you upload for me all folder? I think about /android/system/device/htc/dream-sapphire/.
Thanks!
The command "extract_files.sh" will extract those files from your phone, but you need to have the phone connected via USB with your PC.
Before trying, you should check whether your adb connection with your phone is working.
Sent from my Gingerbread on Dream using XDA
ADB working for me, If I navigate to platform-tools:
[email protected]:~/sdk/platform-tools$ ./adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
But if I am In dream_sapphire folder, terminal show only that extract-files.sh not found:
bash: ./extract-files.sh: No such file or directory
From which sources do you want to build? For ezGingerbread for example the "extract-files.sh" is located in "~android/device/htc/sapphire".
Btw. adb devices should give you a list of connected devices. If that is empty (as you posted) something is not working correctly.
CyanogenMod sources. List of devices is not empty, my phone is present here but I found no need to paste this line.
Sorry, but I'm green in this. I want to learn some about building android. I follow this:
http://wiki.cyanogenmod.com/wiki/HTC_Dream_&_Magic:_Compile_CyanogenMod_(Linux)
But i type
repo init -u git://github.com/CyanogenMod/android.git ics
instead of
repo init -u git://github.com/CyanogenMod/android.git -b froyo-stable
dream/sapphire is not supported by CM7/CM9 and that's the reason you do not have the directory/files you are expecting. If you only want to get the proprietary files, you can also switch to an older release (e.g. CM6) for that project, but nevertheless you need to change several other things, too, before you will get a build. If you are not familiar with building from sources, I suggest you to start with something easier, i.e. CM6 or ezGingerbread.
Or you could run repo init from anddisa's or my git repos. I don't know his from memory but for mine you would run
Code:
repo init -u https://github.com/tvall43/android.git -b ics-ds
AndDiSa's might be a little better right now but I hope to eventually get mine running something close to stable if possible.
The latest version of cm with the dream/sapphire stuff is cm7 (even though they dropped support). Anything past that you'll have to port yourself (like AndDiSa and I) or wait for someone to.
Also, I'm half asleep. I could have (and likely did) post errors that I didn't notice. Google is your friend.
tvall said:
Or you could run repo init from anddisa's or my git repos. I don't know his from memory but for mine you would run
Code:
repo init -u https://github.com/tvall43/android.git -b ics-ds
AndDiSa's might be a little better right now but I hope to eventually get mine running something close to stable if possible.
The latest version of cm with the dream/sapphire stuff is cm7 (even though they dropped support). Anything past that you'll have to port yourself (like AndDiSa and I) or wait for someone to.
Also, I'm half asleep. I could have (and likely did) post errors that I didn't notice. Google is your friend.
Click to expand...
Click to collapse
OK, I just downloaded your repo. But...
Command:
lunch cyanogen_dream_sapphire-eng
Returns:
[email protected]:~/android/system$ . build/envsetup.sh
including device/htc/dream_sapphire/vendorsetup.sh
including vendor/cm/vendorsetup.sh
[email protected]:~/android/system$ lunch cyanogen_dream_sapphire
Invalid lunch combo: cyanogen_dream_sapphire
[email protected]:~/android/system$ lunch cyanogen_dream_sapphire-eng
vendor/htc/dream_sapphire/dream_sapphire-vendor-blobs.mk:46: *** missing separator. Stop.
Device dream_sapphire not found. Attempting to retrieve device repository from CyanogenMod Github (http://github.com/CyanogenMod).
Found repository: android_device_htc_dream_sapphire
Adding dependency: CyanogenMod/android_device_htc_dream_sapphire -> device/htc/dream_sapphire
Traceback (most recent call last):
File "build/tools/roomservice.py", line 170, in <module>
add_to_manifest([{'repository':repo_name,'target_path':repo_path}])
File "build/tools/roomservice.py", line 121, in add_to_manifest
f = open('.repo/local_manifest.xml', 'w')
IOError: [Errno 2] No such file or directory: '.repo/local_manifest.xml'
vendor/htc/dream_sapphire/dream_sapphire-vendor-blobs.mk:46: *** missing separator. Stop.
** Don't have a product spec for: 'cyanogen_dream_sapphire'
** Do you have the right repo manifest?
And next, command:
[email protected]:~/android/system$ mka bacon
Returns:
make: *** No rule to make target `bacon'. Stop.
How to fix this?
Anybody can't help me?
blaster44 said:
Anybody can't help me?
Click to expand...
Click to collapse
Only CM uses the "make bacon" command. Unless they use the CM repo tool in their repo, it will be unavailable. Same goes for AOSP.
Sent from my HTC PH39100 using Tapatalk 2
I'm trying to download Resurrection Remix repo files. Already downloaded 32GB but then at a point it showed me this error and the sync exited :
Fetching projects : 100% (586/586)
error: Exited sync due to fetch errors
I even tried with repo sync -f but it didn't work. Same error at that particular point. Please somebody tell me what to do. I dont want this 32GB to be a waste.
You need to scroll up and see which repo is failing to sync. Then you can try to figure it what the problem with that one is.
jisoo said:
You need to scroll up and see which repo is failing to sync. Then you can try to figure it what the problem with that one is.
Click to expand...
Click to collapse
Oh I see, acrually there are many files which are showing error while fetching ( "error: cannot fetch platform/prebuilts/go/darwin-x86" and many more). But the thing is how do I fix this ? I have a stable network connection but how can i download those particular files which are not being fetched ?
Suvam Mondal said:
Oh I see, acrually there are many files which are showing error while fetching ( "error: cannot fetch platform/prebuilts/go/darwin-x86" and many more). But the thing is how do I fix this ? I have a stable network connection but how can i download those particular files which are not being fetched ?
Click to expand...
Click to collapse
The repository is either not there anymore, or the branch which repo is looking for doesn't exist.
You can have a look at the manifest in .repo/manifest.xml to see in more detail which URL and branch this is.
How did you get this manifest file (i.e. how did you init your repo) which has such non-existing repos?
jisoo said:
The repository is either not there anymore, or the branch which repo is looking for doesn't exist.
You can have a look at the manifest in .repo/manifest.xml to see in more detail which URL and branch this is.
How did you get this manifest file (i.e. how did you init your repo) which has such non-existing repos?
Click to expand...
Click to collapse
Dont know, just followed the instructions in the Resurrection Remix github page.
However, restarted my pc and that error seemed to be fixed, but got this error at the last step of the process(i.e, during uncompression of files)
I have attached the log file. Please have a look and tell me what to do.
Suvam Mondal said:
Dont know, just followed the instructions in the Resurrection Remix github page.
However, restarted my pc and that error seemed to be fixed, but got this error at the last step of the process(i.e, during uncompression of files)
I have attached the log file. Please have a look and tell me what to do.
Click to expand...
Click to collapse
It looks like there was some errors downloading some of the hardware/qcom repositories, and some of the files are corrupt. That really should not happen by itself, and you may have other bigger issues happening with your VM.
Anyway, you have the option of deleting everything and starting from scratch. If you don't want to do that, you can try deleting the ".repo/project-objects/LineageOS/hardware_qcom_media.git/" and possibly the other hardware_qcom folders. This may remove all the corrupted files as well, and let you re-download only those repositories by doing "repo sync" later.
If repo is able to finish successfully, you should at least have non-corrupted files for the build, though as I said you may have some deeper filesystem corruption issues going on as well.
jisoo said:
It looks like there was some errors downloading some of the hardware/qcom repositories, and some of the files are corrupt. That really should not happen by itself, and you may have other bigger issues happening with your VM.
Anyway, you have the option of deleting everything and starting from scratch. If you don't want to do that, you can try deleting the ".repo/project-objects/LineageOS/hardware_qcom_media.git/" and possibly the other hardware_qcom folders. This may remove all the corrupted files as well, and let you re-download only those repositories by doing "repo sync" later.
If repo is able to finish successfully, you should at least have non-corrupted files for the build, though as I said you may have some deeper filesystem corruption issues going on as well.
Click to expand...
Click to collapse
Thank you very much, it worked. Successfully downloaded the repo files :
But now I'm stuck at the breakfast codename step
My device(Meizu m2 note) has no codename, you know any alternate way for this step ?
Suvam Mondal said:
Thank you very much, it worked. Successfully downloaded the repo files :
But now I'm stuck at the breakfast codename step
My device(Meizu m2 note) has no codename, you know any alternate way for this step ?
Click to expand...
Click to collapse
That would be because RR doesn't officially support this device, and therefore the device and kernel trees are not in the repo probably.
You'll need to port the device yourself, which may be difficult or easy (depending on your experience and how well supported the device generally is).
I had a quick look, and it's probably best if you use source trees from the dev who builds for LineageOS: https://github.com/Moyster?tab=repositories
You'll want to be familiar with the basics of git and github for this, I think.
Best way to figure out what is needed to port a device to another ROM is to compare the device trees of an identical device on the 2 different ROMs. So for instance, because I have a Nexus 5X (bullhead), I would compare the device_lge_bullhead repos in both Resurrection Remix and LineageOS, in order to figure out what I need to add to port a LineageOS device tree to Resurrection Remix.
Anyway, that's pretty much all I can suggest. If you have any specific question, feel free to post here or send me a PM.
Good luck!
jisoo said:
That would be because RR doesn't officially support this device, and therefore the device and kernel trees are not in the repo probably.
You'll need to port the device yourself, which may be difficult or easy (depending on your experience and how well supported the device generally is).
I had a quick look, and it's probably best if you use source trees from the dev who builds for LineageOS: https://github.com/Moyster?tab=repositories
You'll want to be familiar with the basics of git and github for this, I think.
Best way to figure out what is needed to port a device to another ROM is to compare the device trees of an identical device on the 2 different ROMs. So for instance, because I have a Nexus 5X (bullhead), I would compare the device_lge_bullhead repos in both Resurrection Remix and LineageOS, in order to figure out what I need to add to port a LineageOS device tree to Resurrection Remix.
Anyway, that's pretty much all I can suggest. If you have any specific question, feel free to post here or send me a PM.
Good luck!
Click to expand...
Click to collapse
Yes, almost there. This is the first time I am building a ROM, very excited
But i got this error while building the ROM. First i tried with USE_NINJA which gave some error build-lineage_m2note.ninja failed to make. Then I tried with USE_NINJA=false which gave me this error(log file).
I have attached the log file. Please tell me what to do. I followed every step still I got this error, that also in the final step . :crying:
Suvam Mondal said:
Yes, almost there. This is the first time I am building a ROM, very excited
But i got this error while building the ROM. First i tried with USE_NINJA which gave some error build-lineage_m2note.ninja failed to make. Then I tried with USE_NINJA=false which gave me this error(log file).
I have attached the log file. Please tell me what to do. I followed every step still I got this error, that also in the final step . :crying:
Click to expand...
Click to collapse
I would stick with not adding any specific definition for the build, and just using the standard variables (so not adding USE_NINJA true or false), and then having a look at the error messages there.
At least, I won't be able to help much otherwise, as I always just use the default settings for the build.
In the log you attached, there's a bunch of "Cannot allocate memory" errors. I would have a look at the kernel logs as well (you can get these with the "dmesg" command, or using "cat /var/log/kern.log"). You will probably see what is causing the error from here, as it seems to be related to the OS itself.
You may have out of memory (OOM) issues, which is common with nougat builds. To fix that, you can follow the instructions here: http://stackoverflow.com/questions/...ror-try-increasing-heap-size-with-java-option
jisoo said:
I would stick with not adding any specific definition for the build, and just using the standard variables (so not adding USE_NINJA true or false), and then having a look at the error messages there.
At least, I won't be able to help much otherwise, as I always just use the default settings for the build.
In the log you attached, there's a bunch of "Cannot allocate memory" errors. I would have a look at the kernel logs as well (you can get these with the "dmesg" command, or using "cat /var/log/kern.log"). You will probably see what is causing the error from here, as it seems to be related to the OS itself.
You may have out of memory (OOM) issues, which is common with nougat builds. To fix that, you can follow the instructions here: http://stackoverflow.com/questions/...ror-try-increasing-heap-size-with-java-option
Click to expand...
Click to collapse
Did that. But now I am facing this nina_wrapper error 1 at 99% of compilation
Code:
[ 99% 3295/3298] Docs droiddoc: /home/...t/target/common/docs/doc-comment-check
FAILED: /bin/bash /home/suvam/rr/out/target/common/docs/doc-comment-check-timestamp.rsp
frameworks/base/core/java/android/provider/Settings.java:3657: error 101: Unresolved link/see tag "android.provider.Settings.Global#KEY_SMS_BREATH" in android.provider.Settings.System
frameworks/base/core/java/android/widget/SeekBar.java:41: error 101: Unresolved link/see tag "ProgressBar#setMax(int)" in android.preference.CustomSeekBarPreference
DroidDoc took 345 sec. to write docs to /home/suvam/rr/out/target/common/docs/doc-comment-check
ninja: build stopped: subcommand failed.
build/core/ninja.mk:151: recipe for target 'ninja_wrapper' failed
make: *** [ninja_wrapper] Error 1
Suvam Mondal said:
Did that. But now I am facing this nina_wrapper error 1 at 99% of compilation
Code:
[ 99% 3295/3298] Docs droiddoc: /home/...t/target/common/docs/doc-comment-check
FAILED: /bin/bash /home/suvam/rr/out/target/common/docs/doc-comment-check-timestamp.rsp
frameworks/base/core/java/android/provider/Settings.java:3657: error 101: Unresolved link/see tag "android.provider.Settings.Global#KEY_SMS_BREATH" in android.provider.Settings.System
frameworks/base/core/java/android/widget/SeekBar.java:41: error 101: Unresolved link/see tag "ProgressBar#setMax(int)" in android.preference.CustomSeekBarPreference
DroidDoc took 345 sec. to write docs to /home/suvam/rr/out/target/common/docs/doc-comment-check
ninja: build stopped: subcommand failed.
build/core/ninja.mk:151: recipe for target 'ninja_wrapper' failed
make: *** [ninja_wrapper] Error 1
Click to expand...
Click to collapse
As per this page (http://stackoverflow.com/questions/36733124/failed-to-make-the-source-of-android-6-0), you should check which JDK version you are building with. I've never seen this type of error, so you may just want to google it a bit further, if the JDK version doesn't help. Looks like you are making a lot of progress though!
jisoo said:
As per this page (http://stackoverflow.com/questions/36733124/failed-to-make-the-source-of-android-6-0), you should check which JDK version you are building with. I've never seen this type of error, so you may just want to google it a bit further, if the JDK version doesn't help. Looks like you are making a lot of progress though!
Click to expand...
Click to collapse
Checked. My jdk version is 1.8 as required for android 7
Resynced and used brunch DeviceCodeName and got this error
Code:
Building Kernel Config
make CFLAGS_MODULE="-fno-pic" -C kernel/meizu/m2note O=/home/suvam/rr/out/target/product/m2note/obj/KERNEL_OBJ ARCH=arm64 CROSS_COMPILE="/home/suvam/rr/prebuilts/misc/linux-x86/ccache/ccache aarch64-linux-androidkernel-" VARIANT_DEFCONFIG= SELINUX_DEFCONFIG= los14_m2note_defconfig
make[1]: Entering directory '/home/suvam/rr/kernel/meizu/m2note'
HOSTCC scripts/basic/fixdep
/bin/sh: 1: ccache: not found
scripts/Makefile.host:118: recipe for target 'scripts/basic/fixdep' failed
make[3]: *** [scripts/basic/fixdep] Error 127
/home/suvam/rr/kernel/meizu/m2note/Makefile:424: recipe for target 'scripts_basic' failed
make[2]: *** [scripts_basic] Error 2
Makefile:130: recipe for target 'sub-make' failed
make[1]: *** [sub-make] Error 2
make[1]: Leaving directory '/home/suvam/rr/kernel/meizu/m2note'
vendor/cm/build/tasks/kernel.mk:283: recipe for target '/home/suvam/rr/out/target/product/m2note/obj/KERNEL_OBJ/.config' failed
make: *** [/home/suvam/rr/out/target/product/m2note/obj/KERNEL_OBJ/.config] Error 2
make: *** Waiting for unfinished jobs....
It took approx 4 hours and then the compilation terminated.
Really hopeless now
*UPDATED*
resynced the repo and the device kernel and used brunch devicecode command and got this out of memory error and asked me to increase my heap size. How much should I set the heap size to ? I am having 6gb ram and current heap size is 3gb (by using java -Xmx 3072m)
I have attached the log file
Sync app email
Hi, i have installed on my Samsung s3 i9300 a resurrection remix but my app "aquamail" don't synchronizes in background.
When i update manually, it works regularly.
Please, can you help me?. :crying:
Thank's
mariorolex said:
Hi, i have installed on my Samsung s3 i9300 a resurrection remix but my app "aquamail" don't synchronizes in background.
When i update manually, it works regularly.
Please, can you help me?. :crying:
Thank's
Click to expand...
Click to collapse
Can someone help me?
mariorolex said:
Can someone help me?
Click to expand...
Click to collapse
Does anyone else have my own problem?. :crying::crying::crying:
Suvam Mondal said:
*UPDATED*
resynced the repo and the device kernel and used brunch devicecode command and got this out of memory error and asked me to increase my heap size. How much should I set the heap size to ? I am having 6gb ram and current heap size is 3gb (by using java -Xmx 3072m)
I have attached the log file
Click to expand...
Click to collapse
Reduce jack threads if you don't have at least 8GB free ram.
How do you solve Unresolved link/see tag error?