Database Info

[Q] Ouku Horizon update

Hello all.
I have a Ouku Horizon (p801w) bought through Lichtinthebox.com
I am very happy but I would like a other version of Android.
I'm no expert on this, so I ask your help.
Now I have:
Android 2.2.2
Baseband version iris_p800w_V1.20
Kernel 2.6.35.7 root @ scm-Perf # 3
Build number FRG83g
software version iris_p801w_V1.21
Hardware version IRIS_MP
I would like Gingerbread, but a newer version of Froyo is also good.
would you like to give to a HOW_TO?

hi
did you were able to rooted it?
I rooted mine but when I tried to backup the rom so I can flash a new one
it boot loops now I'm stuck...

boot ouku horizon : universal Androot still doesn't work
i tried androot on my ouku and it doesn't work. you say you managed to root it?
how did you do?
i'm on linux mint and my phone in on froyo.
I obviously tried to boot with the latest version of superoneclick. it opens properly etc BUT it keeps saying "waiting for device"
regards

How to get Root to flash this phone as described in the Russian forum forum.china-iphone.ru in this topic viewtopic.php?f=37&t=14382

careful though
i sure don't understand russian. according google translation, this just tells you how to use superoneclick on your ouku.
with me it didn't work so far.
i'm trying again and i'll come back with more info if it works. if there is no more message after that one, just make a educated guess.

WM8850-Mid Remove firmware

I searched and found a thread about how to root my device and install firmware. So, I rooted first which worked. Then I tried a firmware from this site, namely MaPan7650B. When I did this my tablet boots up like all is well but my touch screen does not respond anymore. So, I need help removing this firmware to go back to defaults. I have no idea how to do it.
I'm desperate.
SPECS:
Android Tablet 7''
Model number: WM8850-mid
Android version: 4.0.3
Kernel Version: 3.0.8
Build Number: 4.0.3 ICS Ver1.3.0-20120911.025941

iboga said:
I searched and found a thread about how to root my device and install firmware. So, I rooted first which worked. Then I tried a firmware from this site, namely MaPan7650B. When I did this my tablet boots up like all is well but my touch screen does not respond anymore. So, I need help removing this firmware to go back to defaults. I have no idea how to do it.
I'm desperate.
SPECS:
Android Tablet 7''
Model number: WM8850-mid
Android version: 4.0.3
Kernel Version: 3.0.8
Build Number: 4.0.3 ICS Ver1.3.0-20120911.025941
Click to expand...
Click to collapse
First, you should need to know which actual model of your MID.
MaPan & a few variants model mostly came from Eken W70 by different modules, mostly they change using different Touch Panel Chip Controller, you should have know it.
Even Eken W70 is came from different PCB version that they modified the board quite frequently.
Try to browse the "FirmwareInstall\config" folder, you should see the Brand name & Model no. .fwc file.
To select the right one to flash your device is just put the "+" in front the .fwc file.
If you haven't found one suitable, just try to search the different source of W70 WM8850 firmware, you might see a collection of different .fwc config file there.
Give a few tries, then you should able to find out what Touch Panel Controller is using.

HELP- Shield Portable stuck with ROTH Diagnostics ROM. Help getting back to Stock

I tried to get help with this before months back, but no help was useful. So, I thought I'd try once more..
I have a Shield Portable that's running the diagnostics rom. (Model number shows as Roth Diagnostics)
Model Number- Roth Diagnostics
Android Version- 4.2.1
Kernel Version- 3.4.10-g6f428d8
[email protected] #1
Tue Aug 27 16:37:56 PDT 2013
Build Number- rothdiag-userdebug 4.2.1 JOP40D 7947_223.4068 test-keys
Bootloader Version- 7947_199.8246
I have installed the drivers to attempt to flash stock myself, but the device shows up as Fastboot in device manager, and I can't get adb to work with it, since the drivers provided by Nvidia seem to not work with it in bootloader like this. Also, if I try to boot into recovery, it says no command.

did you try using the universal naked driver? https://forum.xda-developers.com/showthread.php?t=2386956

i need help with android box

[Bmodel no: xs
android version 4.4.2
build number: V002M80_201503326
kernel version: 3.10.33
[email protected](20150204.16392
My problem is its got kitkat 4.4.2 on it, there is an option to update system on this page but when i click it, it keeps saying error, is there anyway i can manualy download firmware for this box with a higher level of android on it and flash it myself?
thank you
Tediboy[/B]

someone must know this, plz

Help ~ getting an unbranded tablet to run google home?

Hello all, this is my first post.
I have joined the site because I am looking for help with an unbranded tablet that I have.
I would like to use this tablet as a very basic wall mounted control point for google home, in order to control my smart lights and other smart devices.
However, the tablet is old and has an old version of android. Subsequently it appears that google home cannot be installed on it.
It will also not update to a newer version, potentially because the 'firmware' is unsupported? I am unsure because this is all very new to me.
Because the tablet doesn't appear to have a 'brand', I am struggling to find any support or step by step instructions.
I know very little about 'flashing, roms, rooting etc., however I have managed to root it through kingo, but don't know what needs to happen next.
The device info is:
Model: N98
Allwinner A33 quadcore,
Android 4.4.2 (kitkat?)
Firmware: V2.0
Kernal ver' 3.4.39
Build number: astar_y3-eng 4.4.2 KVT49L 20151208 test-keys
I've also included a couple of photos of its motherboard.
Any help would be greatly appreciated and what steps I need to take just to get google home up and running on it,
thank you very much in advance