Hi XDA Guru`s,
I have tried to search for a proper guide which will tell me how to move from 4.1.x to 4.2.x.
There are many roms but all say they are without boot.img, some say xxxx kernel is needed etc.
So someone please put up steps that say how and what to do.
I am not asking you to put up links or upload the required files, zips, .img files here but aleast write it down so as to have a proper step by step instructions.
I am sure we all can search for files on google/xda provided we know what we need to look for.
Please take this request of a less mortal person and shed some light on me.
Thanks
[Guide] How to Port Rom
This is Basic
HOW TO PORT ROM
1. Download base rom (designed for your phone) and port rom (the rom you want to port)
2. Open them with 7-zip (no need to extract)
3. Delete app, framework, fonts and media folders in BASE rom and move the app, framework, fonts and media from PORT rom to BASE rom
4. Your rom is now ready. Boot into recovery, Wipe everything and flash the BASE rom. It should boot. If it does not boot then do the next step
5. Go into system/lib folder in both the roms and replace the libandroidruntime.so file
6. Remember the final rom is BASE rom which you should flash on the phone.
myhdmini said:
Hi XDA Guru`s,
Thanks
Click to expand...
Click to collapse
I will help u bro, don't worry
Bro are u in stock ROM ???? (i.e default Micromax ROM which came with the device)
have u rooted your device ??
have u installed any custom recovery (clockwork mod or twrp ..etc) ????
reply to these, so tht i can help u
cheers
edit:
if u have done everything above
then download and install any 4.2 rom through recovery
join this group there u can find the kernal "Xtreme-Boost-v2-4.2.x-3.4.69-rc1.zip"
https://www.facebook.com/groups/Micromaxcanvas2/
download the zip and install through recovery
Lal Ayer said:
This is Basic
HOW TO PORT ROM
Click to expand...
Click to collapse
buddy u r having an xda account and a member, pls dont be so dumb understand his question properly before answering and don't spam for god sake
no offense
myhdmini said:
Hi XDA Guru`s,
I have tried to search for a proper guide which will tell me how to move from 4.1.x to 4.2.x.
There are many roms but all say they are without boot.img, some say xxxx kernel is needed etc.
So someone please put up steps that say how and what to do.
I am not asking you to put up links or upload the required files, zips, .img files here but aleast write it down so as to have a proper step by step instructions.
I am sure we all can search for files on google/xda provided we know what we need to look for.
Please take this request of a less mortal person and shed some light on me.
Thanks
Click to expand...
Click to collapse
Download the ROM (without boot.img)u wish and flash it via recovery ....and search for latest andiroxu kernel .....then u r in 4.2.X os
Sent from my Micromax A110 using XDA Premium 4 mobile app
myhdmini said:
Hi XDA Guru`s,
I have tried to search for a proper guide which will tell me how to move from 4.1.x to 4.2.x.
There are many roms but all say they are without boot.img, some say xxxx kernel is needed etc.
So someone please put up steps that say how and what to do.
I am not asking you to put up links or upload the required files, zips, .img files here but aleast write it down so as to have a proper step by step instructions.
I am sure we all can search for files on google/xda provided we know what we need to look for.
Please take this request of a less mortal person and shed some light on me.
Thanks
Click to expand...
Click to collapse
Hello brother....
I THINK THAT YOU SIMPLY ASKED FOR THE STEPS TO INSTALL A 4.2 ROM IF YOUR DEVICE IS RUNNING ON 4.1.x...
ITS REALLY EASY BRO!
FIRST ROOT UR PHONE AND INSTALL CWM RECOVERY(skip if already done.)
THEN DOWNLOAD THE ROM ZIP AND ANDIROXU KERNEL FOR 4.2 AND PLACE IT IN UR PHONE SD CARD.
GO TO CWM RECOVERY.
WIPE/FORMAT DATA...WIPE CACHE AND THEN GO TO ADVANCED MENU AND WIPE DELVIC CACHE.
THEN SELECT INSTALL ZIP FROM SD CARD>CHOSE ZIP FROM SD CARD AND SELECT THE ZIP AND INSTALL (OR FLASH IT)
THATS ALL.
THAN LOOK FOR THE ANDIROXU KERNEL YOU HAVE DOWNLOADED AND SELECT AND INSTALL IT.
BUT THIS TIME NO WIPES NEEDED.
THATS ALL. REBOOT AND YOU WILL HAVE 4.2 ON YOUR PHONE.
myhdmini said:
Hi XDA Guru`s,
I have tried to search for a proper guide which will tell me how to move from 4.1.x to 4.2.x.
There are many roms but all say they are without boot.img, some say xxxx kernel is needed etc.
So someone please put up steps that say how and what to do.
I am not asking you to put up links or upload the required files, zips, .img files here but aleast write it down so as to have a proper step by step instructions.
I am sure we all can search for files on google/xda provided we know what we need to look for.
Please take this request of a less mortal person and shed some light on me.
Thanks
Click to expand...
Click to collapse
if you want to upgrade to 4,2,2 then just simply install Dark Nexus by Dark4Droid. It has nothing to do with boot.img and kernel. Just download it and follow the instructions and flash it. Enjoy
Thanks
srinath2912 said:
Download the ROM (without boot.img)u wish and flash it via recovery ....and search for latest andiroxu kernel .....then u r in 4.2.X os
Sent from my Micromax A110 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
This is exactly what i wanted... thanks....
Got the answer... thx
revanth22 said:
I will help u bro, don't worry
if u have done everything above
then download and install any 4.2 rom through recovery
join this group there u can find the kernal "Xtreme-Boost-v2-4.2.x-3.4.69-rc1.zip"
https://www.facebook.com/groups/Micromaxcanvas2/
download the zip and install through recovery
Click to expand...
Click to collapse
Yes i have already used many roms but all 4.1 based and wanted to go to 4.2 and was seeing all that stuff abt boot.img not included so was confused now that read your msg i know all i need is the rom and the kernel ....
So now thx to you... 4.2 here i come. :laugh:
myhdmini said:
Yes i have already used many roms but all 4.1 based and wanted to go to 4.2 and was seeing all that stuff abt boot.img not included so was confused now that read your msg i know all i need is the rom and the kernel ....
So now thx to you... 4.2 here i come. :laugh:
Click to expand...
Click to collapse
Welcome bro
Like other friend said u can use Dark magic or dark nexus rom which comes with kernel included in ROM but thn it would be old kernel
for performance improvement Join tht fb group and There u can download the latest kernel "Xtreme-Boost-v2-4.2.x-3.4.69-rc1.zip"
and simply flash through recovery as simple as tht
enjoy
Installed Dark Nexus
revanth22 said:
Welcome bro
Like other friend said u can use Dark magic or dark nexus rom which comes with kernel included in ROM but thn it would be old kernel
for performance improvement Join tht fb group and There u can download the latest kernel "Xtreme-Boost-v2-4.2.x-3.4.69-rc1.zip"
and simply flash through recovery as simple as tht
enjoy
Click to expand...
Click to collapse
Hi I installed Dark nexus and it works gr8 expect for 2 issues that i have posted on Dark nexus forum also.
1. Dialer is misplaced keys --- 3 6 9 and # keys not showing completely.
2. lock-screen is also not aligned properly. - The lock as it can be seen has moved out of the screen also the network operator names are not center aligned, lastly the clock in 4.2.2 should be in the center here as we can see it is slightly towards the right.
Any comments ?
Screenshots attached .
myhdmini said:
Hi I installed Dark nexus and it works gr8 expect for 2 issues that i have posted on Dark nexus forum also.
1. Dialer is misplaced keys --- 3 6 9 and # keys not showing completely.
2. lock-screen is also not aligned properly. - The lock as it can be seen has moved out of the screen also the network operator names are not center aligned, lastly the clock in 4.2.2 should be in the center here as we can see it is slightly towards the right.
Any comments ?
Screenshots attached .
Click to expand...
Click to collapse
thts lcd density issue bro
Download lcd density changer app from google play and set default dpi to 210 and reboot
its like changing resolution in windows
PS: remember to take a cwm backup before u do something with system files
this case its not necessary but u never know what will go wrong so it is recommended
myhdmini said:
Hi I installed Dark nexus and it works gr8 expect for 2 issues that i have posted on Dark nexus forum also.
1. Dialer is misplaced keys --- 3 6 9 and # keys not showing completely.
2. lock-screen is also not aligned properly. - The lock as it can be seen has moved out of the screen also the network operator names are not center aligned, lastly the clock in 4.2.2 should be in the center here as we can see it is slightly towards the right.
Any comments ?
Screenshots attached .
Click to expand...
Click to collapse
Bro.. Its lcd problem. Download root browser from play store.. And then go to system.. There will be a file written build.prop tap on it and open it as text editor. Search for this command
ro.sf.lcd_density= value would be something like 240
If u cant find this command just put it by urself ans set the value to 210. And save it then reboot ur device and done
Sent from my Qmobile Noir A10 using Tapatalk
installed go locker and Dialer apps
mrtaim3 said:
Bro.. Its lcd problem. Download root browser from play store.. And then go to system.. There will be a file written build.prop tap on it and open it as text editor. Search for this command
ro.sf.lcd_density= value would be something like 240
If u cant find this command just put it by urself ans set the value to 210. And save it then reboot ur device and done
Sent from my Qmobile Noir A10 using Tapatalk
Click to expand...
Click to collapse
Thanks for taking time out to reply, i tried that but after applying the value the phone did not move ahead from the nexus logo screen, so had to end up restoring from backup.
later i installed go locker and Dialer apps and they seem to be working fine.
Thanks anyways.
Related
My First ROM
Galaxy DX
Benefit of installing this ROM:
1.Deodexed
2.init.d Script support
3.BusyBox
4.Superuser(ROOTED)
5.New Apps
6.New Launcher
7.Lockscreen
8.Custom Bootanimation
9.Bash Support
10.framework-res mods
This File Doesn't Work Via Recovery. See the method below. HOW TO GET ROOTED: forum.xda-developers.com/showthread.php?t=1156204
Steps to Install:
1.Download the file (Do not Extract)
2.Download Android Commander and then set it up for use
3.Connect your mobile to your PC. Make sure of USB Debugging
4.In the toolbar in android commander there is flash option click it. Select the update file.
5.Flash it
6.Reboot.
Please post screens for me please Thanks.
Factory reset required
Completely transformed ROM
Make sure you make backups.
WITHOUT WARRANTY I AM NOT LIABLE FOR DAMAGE
Link: http://www.multiupload.com/RBWVF60LZC
THIS ROM WILL WORK ONLY THE ANDR COMMANDER WAY NO STOCK RECOVERY WORKING
Android Commander
Windows: www.androidcommander.com
Linux: www.forum.xda-developers.com/showthread.php?t=684792
can v install it by odin ????
or wich tool if any other tool pless give d link ..
n where is d link of this rom ????
No ODIN this is a update zip see the method and the download links above
downloding
is it overclocked also ??????????
if itsnt can u please add this feature in your rom
Try this app for overclock CPU Master (Free)
for using this overclock feature the kernel has to be modded have u modded it ???????
Oh sry frgt that no i wont be including the overclock any time soon
is it based on XXKQ2?
and screenshots plz
Downloading..is it just another deodexed rom like v have pratyush's vishvanath's inv athority's or it has any added feature..well im using pratyush rom with kak tweak and supercharger script and score upto 1540 which ranked 2nd interms of performance..guys we actually need somw performance tweaks not just another deodexd rom..we need 2 overclock our device to get most out of it..
Sent from my GT-S5670 using Tapatalk
aftr step 4 i didnt got wht u said how to flash
there is no option in android commander to flash etc
i did click on flash nothing hpnd
No it is based on ASIA firmware
Ill just post a pic where it is
Here im attaching screens of antutu benchmark 1st one is my screens with score and second one is screen of winner's score..sd card speed i can also increase its not a big deal but the he get 130+ in cpu float point and mine is just 17 ..can anybody tell how he did that
Sent from my GT-S5670 using Tapatalk
justkiddinghere said:
aftr step 4 i didnt got wht u said how to flash
there is no option in android commander to flash etc
i did click on flash nothing hpnd
Click to expand...
Click to collapse
Try searching google to know how to flash via android commander
Sent from my GT-S5670 using Tapatalk
Everything got correct but then Installation aborted!!
pratyush.creed said:
Everything got correct but then Installation aborted!!
Click to expand...
Click to collapse
same here didnt got how to install
the flash option not appearing to click
raj3534 said:
Try searching google to know how to flash via android commander
Sent from my GT-S5670 using Tapatalk
Click to expand...
Click to collapse
dude m not a mad
i alredy did tht
there is nthng on google
can u add screen shots...
i think that this rom need more work from u before posting it
at least make it load via recovery and fix the installation problems too
Guys I am a complete noob
and i am bored by the orignal look of android
I need something new
My friend also has an android phone.So he rooted that deodexed, new rom
So i need to ask can i root this phone ?
Which rom is the best to install after rooting ?
i upgraded my phone to xxkpq with my friends help. Now i dont know what to do?
So please help me
hey dude u can try to install. a good kernel with cwm (clock work mod)....a very important tool to customize your phone....then download a custom rom of your choice from the development section (see that ur firmware matches that of the rom) ....follow the instructions there and you will have a full customized phone as most c-roms are pre rooted and deodexed .....when you learn more and get used to the phone you can try miui or cm (but that is for later ...) .......since ur on kpq u can try Poseidon or vurrut roms (Ive used them and they're nice)....
Its Simple
i am using Poseiden's ROM
How to Install it :-
Backup ur apps, Contacts, Messages.
a) U'll need CWM (i use [CF-Root] by Ganesh u get here for XXKPQ)
1) Flash this *.tar file as a PDA in Odin
b) Downlad Poseiden ROM from here or here
1) Copy this zip file to ur external SD Card
2) Goto Recovery Mode Install the zip file from ur external SD Card
3) after installation setup will reboot to recovery mode, wipe Cache & DALVIK CACHE
Done
Can i install miui or,cm7 ? My friend has miui and i like it very much
Sent from my GT-I9003 using xda premium
anuraagkochar said:
Can i install miui or,cm7 ? My friend has miui and i like it very much
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
ya u can!!!! just follow steps in the req thread
someone beat me to it
supergaijin said:
someone beat me to it
Click to expand...
Click to collapse
meaning ?
Sent from my GT-I9003 using xda premium
anuraagkochar said:
meaning ?
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
he means that the person above him beat him to the answer
All the work to make the Deodexed.zip of your rom is done to your Windows PC.
Open the Deodexer-Tool.zip you have just download.
Extract the Deodexer-Tool folder to your Desktop or anywhere you whant.
Open the folder Deodexer-Tool you just extract and follow option 1 or 2.
You have two option's:
1.) Connect your phone to pc and run the Deodexer_from_phone.bat whait ....... and you will see a Deodexed.zip and zipaligned ready to flash zip.
-----------------------------------
2.) If you have allready dumped odexed rom and you whant to deodex just put all the .apk's and .odex files from your dumped rom system\app to \Deodexer-Tool\Work\app and all the .jar's and the two framework apk's from your dumped rom system\framework to Deodexer-Tool\Work\framework and run the Deodexer_dumped_rom.bat whait ....... and you will see a Deodexed.zip and zipaligned ready to flash zip.
(If you whant an app like SuperSU.apk to be in your rom then add that to Work\app folder before run the Deodexer_dumped_rom.bat).
-----------------------------------
Click to expand...
Click to collapse
At the option 1 the script will dump and deodex every app you have at that time in your system/app phone folder.
Doesn't matter if is allready deodexed, the script just ignore deodexed .apk's but it will add to the zip at the end.
The option 2 is same but the script doesn't dump anything from your phone. It is only look what you add at the specificate folder's: Deodexer-Tool\Work\app & framework.
Try it and waiting for your news.
Credits to: Amestris
Ok I am alittle confused with this all I want to do is Deodex and zipalign my I9305 rom which i am currently running, I have removed unwanted system apps etc Now where to i put the deodexer_from__phone.bat so i can run it? does it have to be in a special folder or can i just dump it on my ext-sd card and run the bat from windows? What software is being used to deodex the apks, I am new to this developing side of things an explanation for a dummy would be great as i want to learn these things but you dont have to just instruct me and that will do if your busy thanks
btemtd said:
Ok I am alittle confused with this all I want to do is Deodex and zipalign my I9305 rom which i am currently running, I have removed unwanted system apps etc Now where to i put the deodexer_from__phone.bat so i can run it? does it have to be in a special folder or can i just dump it on my ext-sd card and run the bat from windows? What software is being used to deodex the apks, I am new to this developing side of things an explanation for a dummy would be great as i want to learn these things but you dont have to just instruct me and that will do if your busy thanks
Click to expand...
Click to collapse
No need to confuse your self it is really simple work.
All the work done to your Windows PC.
Open the Deodexer-Tool.zip you have just download.
Extract the Deodexer-Tool folder to your Desktop or anywhere you whant.
Open the folder Deodexer-Tool you just extract and follow option 1 or 2 from OP.
ausdim , nice tools... what version of smali are u using ?
prodigiez said:
ausdim , nice tools... what version of smali are u using ?
Click to expand...
Click to collapse
Thank's
Smali & Baksmali is 1.3.4-dev
So is working or not?
Guys sorry to ask but i dont have the device yet.
ausdim said:
No need to confuse your self it is really simple work.
All the work done to your Windows PC.
Open the Deodexer-Tool.zip you have just download.
Extract the Deodexer-Tool folder to your Desktop or anywhere you whant.
Open the folder Deodexer-Tool you just extract and follow option 1 or 2 from OP.
Click to expand...
Click to collapse
Is there a possibility that we can get something to to the zip-align and deodex without having to move files to and from your mobile and windows. Only cause it seems alittle messy for the everyday user loool I mean i would probably be able to do it but i just dont want to miss anything or do something wrong.
Actually I have an Idea I am going to install the Rom you made then just restore my appz what you think that would be the easiest way right?
Thanks Alot.Need this tool very much .
[Deodexed & Zipaligned GT-I9305 XXALI5] for GT-I9305
Will this delete my user apps? Or just replace and add any missing system apps
btemtd said:
Is there a possibility that we can get something to to the zip-align and deodex without having to move files to and from your mobile and windows. Only cause it seems alittle messy for the everyday user loool I mean i would probably be able to do it but i just dont want to miss anything or do something wrong.
Actually I have an Idea I am going to install the Rom you made then just restore my appz what you think that would be the easiest way right?
Click to expand...
Click to collapse
No isn't possible to deodex and zipalign without move the file's to your pc atm.
You dont have to restore any of your app's after install any of this.
btemtd said:
[Deodexed & Zipaligned GT-I9305 XXALI5] for GT-I9305
Will this delete my user apps? Or just replace and add any missing system apps
Click to expand...
Click to collapse
The only think it will be deleted and replaced is the system/app and system/framework.
Non of your app's will be deleted.
Please before do anything make a backup of your rom with CWM so if anything goes wrong you can restore that.
Thank's
Great work ausdim. I've modified your script slightly since I have tools that can extract the .tar.md5 > system.img > system.ext4.img > app/framework folder.
If you need those tools, you can give me a shoutout too - so that you save your time from flashing the device and adb pull it
ausdim said:
Thank's
Smali & Baksmali is 1.3.4-dev
So is working or not?
Guys sorry to ask but i dont have the device yet.
Click to expand...
Click to collapse
i will run my batch and let it deodex and zipalign overnight..i guess zipalign need few hours.. let u know next day
Late reply to you bro, sorry (PM'ed as well) - it works well and fine, tested on my unit.
:good::good::good::good::good::good::good::good:
No go for me... device stuck at "Samsung" boot up screen.. waited 15mins...
Flashed back stock rom...
Sent from my GT-I9305 using Tapatalk 2
can you elaborate steps? as i clicked Deodexer_dumped_rom.bat , it created deodexd.zip but when i am clicking Deodexer_from_phone.bat it just stopped at "Connect your phone to PC" however my phone is connected to pc already
Connecting tablet
Hey there....
Thanks for this post, and file.I'm running CleanROM 2.5 on an Asus 300T tablet. CleanROM is an odex ROM, but theres a script I'd like to run that works on deodexed. My question is, when I connect my tablet, am I going into USB mode, or just connect the tablet as if I'm transferring files, such as music.
Thanks for your help in advance.
blackyz said:
can you elaborate steps? as i clicked Deodexer_dumped_rom.bat , it created deodexd.zip but when i am clicking Deodexer_from_phone.bat it just stopped at "Connect your phone to PC" however my phone is connected to pc already
Click to expand...
Click to collapse
I release a new reworked tool soon.
Sorry but i dont have the phone to test it.
Omega Recon said:
Hey there....
Thanks for this post, and file.I'm running CleanROM 2.5 on an Asus 300T tablet. CleanROM is an odex ROM, but theres a script I'd like to run that works on deodexed. My question is, when I connect my tablet, am I going into USB mode, or just connect the tablet as if I'm transferring files, such as music.
Thanks for your help in advance.
Click to expand...
Click to collapse
You need adb enabled on your phone and the drivers on your pc.
we need our own general and q&a thread. I dont like the fact that we have to post in amongst i9300 threads. Can we all ask the mods this? The more of uz the better.
What we want?
Our own I9305 general thread and q&a thread or atleast our own q&a thread. Lets all msg the mods please
Sent from my GT-I9305 using xda app-developers app
btemtd said:
we need our own general and q&a thread. I dont like the fact that we have to post in amongst i9300 threads. Can we all ask the mods this? The more of uz the better.
What we want?
Our own I9305 general thread and q&a thread or atleast our own q&a thread. Lets all msg the mods please
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
It's a great idea. It'll help to keep the OP leaner. You could also come up w/ a small FAQ that's posted on the OP to help cut down on answering repetitive questions. And if someone does ask a question that's already covered, just point them to the FAQ.
May also want to go into some detail about how to run this on the OP. Not everyone is a developer. You'd be amazed at how many people are mail room clerks, secretaries, managers, work in construction or food service. So, their knowledge is not at all on the same level. They just want to personalize their phone or tablet and be on their way w/o having to get a degree from ITT Tech to do it
Thank you for letting me post. I'm sure I'll have a question or 2 more in the near future. Thank you again.
Sorry, not trying to step on anyones toes here. I just came to look for an answer to a small problem I was having
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Will this work on any device?
Sent from my SHW-M250K using xda app-developers app
Kitschki said:
Will this work on any device?
Sent from my SHW-M250K using xda app-developers app
Click to expand...
Click to collapse
It should work on most samsung devices, provided that it is rooted.
Sent from my GT-I9305
Shahul proudly presents you modded custom rom for micromax a90s and micromax a90.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FEATURES
all Bloats Removed
Pre-Rooted
Init.d Support
Zipalingned
Deodexed
Super user added
LMT for navigation( soft keys at the bottom removed)
Power options added ( reboot, recovery, power off....)
Latest SONY MEDIA apps
Sony walkman music
Sony album
Sony movies
Bravia Engine 2 for media apps
Miui type File Explorer(root access/user friendly)
Miui sound recorder with mp3 support
Torch and note app
Battery 1% mod added
Rose Mery font from Galaxy Note 2
Xperia Z Home Launcher (Modded to reduce lags)
All new Build.prop tweaks added
Addon Features:
Android 4.2 Keyboard
JeallyBean Google Now
GAPP with GTALK Video/Audio Calling
Click to expand...
Click to collapse
Note: Do this at your own risk
Procedure to flash in CWM
Wipe cache
Wipe data
Advanced/wipe delvik cache
Mount/format system
Install Zip from sd card
Reboot
After that Boot logo appears wait 2 minutes, it will take more time for first boot for deodexed Rom.
To activate LMT.
open app drawer
open LMT and select start services
Also select Autostart and enable it.
Click to expand...
Click to collapse
Credits
DsiXDA for Android kitchen,yuwang for guide me
Thilanc for Xperia z Launcher Mod
Rizal for Sony Media App Mod
Apoonet for Miui Mods
noname81 for LMT
Click to expand...
Click to collapse
Feedbacks
Shivam Bhalla said:
I re-installed it and done everything as given procedure and now its working fine , it maybe some problem in flashing before i installed.
Thanks YOU. IT's really a nice rom.
Click to expand...
Click to collapse
Preet917 said:
Great Rom bro! Smooth with a lot of free Ram. This one is perhaps even better than stockonfire and zhao touch based on my testing.
It would be great if you could port JB. You could search for the phone's kernel online. The oem manufacturer of the A90s is Gionee which is a Hong kong based company. The model number is 868H.
Once again, I applaud your work! Keep the good stuff rolling in!
Click to expand...
Click to collapse
Abdl said:
Finally I got your rom up and running in my gn 868,its the best rom ever,thanks man,you can see in my sig
Sent from my A90 using xda app-developers app
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Bugs
1.When default navigation key at the bottom is active, app drawer last row icon names are not visible.FIX HERE.
2.Music player at the lockscreen is not working and no music widget.
3.In on/off toggle widget, data connection and torch are not working.
Click to expand...
Click to collapse
Download link for A90S Below(Dual Core)
Megamax_A90S_V1.zip - 286.56 MB
Note: For gn868h devices you need to change boot image in zip with your stock ROM boot image and then you have to flash.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Download link for A90 Below(single core)
Megamax_A90_V1.zip - 311.45 MB
After Download u need to change value in update script.
unzip ROM zip, navigate to \META-INF\com\google\android\update script. Open it using notepad++. Search for mmcblk0p6 and replace it with mmcblk0p7. Two location u have to replace. Save it, zip it and see video for how to flash it.
Note: For gn868h devices you need to change boot image in zip with your stock ROM boot image and then you have to flash.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I Really Don't Have Anything, But You Are Free To
Button & Rate This Thread 5 Stars
Screenshots
Ok what's next? Thanks button
Click to expand...
Click to collapse
Addons, Videos and FAQ's
Addons
To install Addons go to CWM Recovery and simply do install zip from sdcard. No need to wipe anything.
1. Android 4.2 keyboard
Download link:4.2 keyboard swipe feature
2. JeallyBean Google Now
Download link:Google Now
Discussion Thread and source:Here
3. GAPPS Includes GTALK with video calling
Download link:GAPPS
Note1: open downloaded zip go to system/app/ now delete gallarygoogle.apk coz we alreay have sony album so it consume more ram for gallery.
Note2: after installing gapps, Google now replaced. So after reboot again install Google now
Click to expand...
Click to collapse
How to Flash Megamax_A90S Custom Rom
Sorry for my language
Click to expand...
Click to collapse
.
FAQ's
1.How to activate default soft navigation keys at the bottom?
Ans: you need build prop editor. Download from play store. In the build prop editor search for qemu.hw.mainkeys=1 and change its value to 0. Reboot your device.now soft navigation appears as default.
2.Is it possible to activate LMT navigation on left side of screen?
Ans: Actually LMT can be activated to appear on all sides(except top) left, right and bottom at the same time.
To activate LMT in different direction. Open LMT scroll down and select activation area position under pie control. Now u have options for left,right and bottom pie activation.
Click to expand...
Click to collapse
I really surprised myself with the beautiful images. An excellent work. :good:
I also found interesting the withdrawal of the lower keys. But I have some doubts about it:
In some games these keys are required to return exactly the options. Had to put that screen back or side there another way?
Anyway, congratulations, continue with more work and you certainly have a great team to reach MMX A90s with JB.:fingers-crossed:
Re: [rom][ics]megamax™ a90s v1[custom rom for micromax a90s][11-02-2013][new release]
lopestom said:
I really surprised myself with the beautiful images. An excellent work. :good:
I also found interesting the withdrawal of the lower keys. But I have some doubts about it:
In some games these keys are required to return exactly the options. Had to put that screen back or side there another way?
Anyway, congratulations, continue with more work and you certainly have a great team to reach MMX A90s with JB.:fingers-crossed:
Click to expand...
Click to collapse
Thank u. I love to use LMT instead of soft keys at the bottom. There are so many settings in lmt( pie keys, gesture recognition, tasker ......)
I am using LMT more than a week. Initially it was difficult to use. Coz we always look for soft keys at the bottom. after few days I used to it with thumb on the right edge of the screen.
Still u want soft navigation key at the bottom. U can activate it.
To activate download any build prop editor from play store and search qemu.hw.mainkeys=1 change its value to 0.
That's it.
Sent from my A90S using xda app-developers app
shahulakthar said:
Thank u. I love to use LMT instead of soft keys at the bottom. There are so many settings in lmt( pie keys, gesture recognition, tasker ......)
I am using LMT more than a week. Initially it was difficult to use. Coz we always look for soft keys at the bottom. after few days I used to it with thumb on the right edge of the screen.
Still u want soft navigation key at the bottom. U can activate it.
To activate download any build prop editor from play store and search qemo.hw.mainkeys=1 change its value to 0.
That's it.
Sent from my A90S using xda app-developers app
Click to expand...
Click to collapse
I have used LMT too, and yes it is great alternative of those soft keys.. in fact best one.. In starting we my feel little uncomfortable, but it is surely good one, and later on we will be addicted.
Thanks for lovely rom:good:
Weldone !! I installed your custom rom and everything has gone good,But whenever i tap to type anything no keyboard is there. Plz help.
Re: [rom][ics]megamax™ a90s v1[custom rom for micromax a90s][11-02-2013][new release]
Shivam Bhalla said:
Weldone !! I installed your custom rom and everything has gone good,But whenever i tap to type anything no keyboard is there. Plz help.
Click to expand...
Click to collapse
I don't know why u got that problem. May be the procedure to flash in cwm u made some mistake. I am not sure about ur problem which r the application u don't have access to keyboard.
Sent from my A90S using xda app-developers app
Re: [rom][ics]megamax™ a90s v1[custom rom for micromax a90s][11-02-2013][new release]
Sent from my A90S using xda app-developers app
Re: [rom][ics]megamax™ a90s v1[custom rom for micromax a90s][11-02-2013][new release]
shahulakthar said:
Sent from my A90S using xda app-developers app
Click to expand...
Click to collapse
Hello guys, when you try my custom rom. Please give ur feedback that will help me to improve its features.
Sent from my A90S using xda app-developers app
shahulakthar said:
Thank u. I love to use LMT instead of soft keys at the bottom. There are so many settings in lmt( pie keys, gesture recognition, tasker ......)
I am using LMT more than a week. Initially it was difficult to use. Coz we always look for soft keys at the bottom. after few days I used to it with thumb on the right edge of the screen.
Still u want soft navigation key at the bottom. U can activate it.
To activate download any build prop editor from play store and search qemo.hw.mainkeys=1 change its value to 0.
That's it.
Sent from my A90S using xda app-developers app
Click to expand...
Click to collapse
shahulakthar
Thanks for the tip (build.prop). First, I always try to fit in, then choose the options.
shahulakthar said:
Hello guys, when you try my custom rom. Please give ur feedback that will help me to improve its features.
Sent from my A90S using xda app-developers app
Click to expand...
Click to collapse
Testing here, and in a few days, surely feedback for you.
Installed CWM just nw, to test this rom. I'll be back with my feedback / help reply soon.
Thanks for the effort buddy
shahulakthar said:
Hello guys, when you try my custom rom. Please give ur feedback that will help me to improve its features.
Sent from my A90S using xda app-developers app
Click to expand...
Click to collapse
I did all the procedures you asked (Procedure to flash in CWM). And unfortunately it does not start. Do not know if I did something in particular, but when I restore, it has informed that the internal sdcard is damaged, then you have to format it. I know you changed something about it at the beginning of the forum MMX A90s, but I do not know if that was inserted into your ROM.
I know it may be different on some issues, but the Custom Rom of the King Ace after the changes have worked on my phone. I'm not wanting to change your ROM, if to everyone who has MMX A90s are being installed correctly. I'm just trying to give a feedback of my experience in the installation of your ROM. I'm sad because I wanted to see and feel the use of LMT and all the interesting options that you placed.
Regards.
lopestom said:
I did all the procedures you asked (Procedure to flash in CWM). And unfortunately it does not start. Do not know if I did something in particular, but when I restore, it has informed that the internal sdcard is damaged, then you have to format it. I know you changed something about it at the beginning of the forum MMX A90s, but I do not know if that was inserted into your ROM.
I know it may be different on some issues, but the Custom Rom of the King Ace after the changes have worked on my phone. I'm not wanting to change your ROM, if to everyone who has MMX A90s are being installed correctly. I'm just trying to give a feedback of my experience in the installation of your ROM. I'm sad because I wanted to see and feel the use of LMT and all the interesting options that you placed.
Regards.
Click to expand...
Click to collapse
lopestom i flashed this rom for more than 6 times without any bootloop. i am here to help you. how u got that message. sometimes people select format emmc instead of format system accidentally. i am damn sure my custom rom is bug free till now.
one more thing when flashing Rom by default it wipe all data.
now i will upload video tutorial on how to flash my rom.
lopestom you r using Blu mobile. it may conflict i can't assure you. king Ace rom don't have boot animation. so that may not conflict ur device.
warning: This Rom is only meant for Micromax A90s devices. Not meant for Blu vivo mobiles. Please don't give negative feedback coz u try with blu vivo mobile.
Re: [rom][ics]megamax™ a90s v1[custom rom for micromax a90s][11-02-2013][new release]
Looks great rom...I'll surely try it...
In advance: awesome bro!
:thumbup:
abhi7395 said:
Looks great rom...I'll surely try it...
In advance: awesome bro!
:thumbup:
Click to expand...
Click to collapse
Thanks abhi. I expecting you from yesterday.
shahulakthar said:
lopestom i flashed this rom for more than 6 times without any bootloop. i am here to help you. how u got that message. sometimes people select format emmc instead of format system accidentally. i am damn sure my custom rom is bug free till now.
one more thing when flashing Rom by default it wipe all data.
now i will upload video tutorial on how to flash my rom.
lopestom you r using Blu mobile. it may conflict i can't assure you. king Ace rom don't have boot animation. so that may not conflict ur device.
warning: This Rom is only meant for Micromax A90s devices. Not meant for Blu vivo mobiles. Please don't give negative feedback coz u try with blu vivo mobile.
Click to expand...
Click to collapse
Do not worry, I understand the risks to install a different ROM. It is only my responsibility.:good:
Absolutely NO desire to see my feedack as negative. I feel like an intruder in the team MMX A90s, and yet some people here MMX has been very kind and patient with me. I'm always grateful for that.
Yes, your tip about the boot animation probably gives the BLU VIVO conflict, because I tried to install some bootanimations with the correct resolution, but only a few have started correctly.
Please do not see what I write as negative! And yes as a review of experience. So I say goodbye.
I'm sure your work is beautiful, and the results will bring good returns, I believe it! ........................ :laugh:
shahulakthar said:
I don't know why u got that problem. May be the procedure to flash in cwm u made some mistake. I am not sure about ur problem which r the application u don't have access to keyboard.
Sent from my A90S using xda app-developers app
Click to expand...
Click to collapse
I re-installed it and done everything as given procedure and now its working fine , it maybe some problem in flashing before i installed.
Thanks YOU. IT's really a nice rom.
successfuly flashed megamax
YaY... I flashed the ROM yesterday and I'm very impressed with the new look of my phone now. Thanks a lot Shahul for the awesome ROM. But there are a few bugs (very minor) i would like to report. Don't know if they are in my phone only or in everybody else's. So here we go....
1) Data traffic button from the tools widget doesn't do anything. I have to go to the pull down thing and switch the data traffic ON/OFF from there.
2) When i tap on the 'back light' button, it says "unfortunately, tools has stopped".
and there are few others, I don't know how to tell them in text, will upload with pictures.
And Shahul, please don't get me wrong for this or pls don't think I'm whining. Its with these little feedbacks only a better and bug free s/w can be created.
And again, its an awesome ROM and i'm loving it. Thanks for creating it. Cheers.
EDIT: and there seems to be a problem with album. When swiping images, after 5 or 6 images, it gets struck, it doesn't go to next image or previous image. Is it happening with only my phone or ...???
Re: [rom][ics]megamax™ a90s v1[custom rom for micromax a90s][11-02-2013][new release]
Great Rom bro! Smooth with a lot of free Ram. This one is perhaps even better than stockonfire and zhao touch based on my testing.
It would be great if you could port JB. You could search for the phone's kernel online. The oem manufacturer of the A90s is Gionee which is a Hong kong based company. The model number is 868H.
Once again, I applaud your work! Keep the good stuff rolling in!
Sent from my A90S using xda premium
hello there,
I recently got my E dual, its great but as most of u here , we don't accept less than perfection. so if we wanna mod our dev , we need the firmware to be odexed so here we are:
first of all disclaimer:
I can't be held responsible for anything that happens to you, your belongings, the people you know, the people you don't know, anything that might be closely or remotely related to you. You install the provided software in your phone and you're sole responsible for what may happen. Can't be blamed if your warranty is now void either. Even coffee may taste different afterwards!
what is it:
its the stock Xperia E Dual JB 11.3.A.2.1 with the following :
- completely deodexed
- rooted
- busybox
- maltilang including Arabic and Persian.
- I didn't remove any app from the rom (bloatware) to let u do it ur self
why deodexed :
its easy to customize the ROM the way you want without odexes
how to install:
please make sure that u are on the 11.3.A.2.1 firmware,
1- download the zip and put it in the internal or external sd.
2- unlock ur boot loader and flash jjm34 kernel with CWM "the only way to have cwm for now"
3- reboot to recovery
4- format system & wipe every thing(factory reset)
5- flash the zip
download :
C1605 DEODEXED
credit:
- @jjm34 for CWM
- @dsixda for great tool
so lets start modding
and as a start here is my SystemUI "not finished yet but here is the pre release"
- removed AM/PM to save some space
- added new battery icons with %
- added 0.0KB thanks to @Dzol Cp
- ??? still working
how to install :
first copy ur original SystemUI.apk to safe place or make a backup will be better
download and copy the SystemUI.apk to sdcard
with app like ES file explorer copy it to system/app override the old one
restart and enjoy
or just flash the SystemUI.zip
working now on porting SMALL APPS and MAGNIFICATION GLASS maybe soon
thanks.
andro-SYR said:
and as a start here is my SystemUI "not finished yet but here is the pre release"
- removed AM/PM to save some space
- added new battery icons with %
- added 0.0KB thanks to @Dzol Cp
- ??? still working
how to install :
first copy ur original SystemUI.apk to safe place or make a backup will be better
download and copy the SystemUI.apk to sdcard
with app like ES file explorer copy it to system/app override the old one
restart and enjoy
working now on porting SMALL APPS and MAGNIFICATION GLASS maybe soon
thanks.
Click to expand...
Click to collapse
nice successfully worked
when i try to deodex my XE SS ROM, there's only 2 .jar files lefted (won't deodexed by kitchen)
framework.jar and framework-ext.jar... it's gave errors
did you meet these errors while deodexing?
yayakuya said:
when i try to deodex my XE SS ROM, there's only 2 .jar files lefted (won't deodexed by kitchen)
framework.jar and framework-ext.jar... it's gave errors
did you meet these errors while deodexing?
Click to expand...
Click to collapse
You may not choose the Api correctly
Cuse android 4.1.1 api is 16
Sent from my C1605 using xda app
andro-SYR said:
You may not choose the Api correctly
Cuse android 4.1.1 api is 16
Sent from my C1605 using xda app
Click to expand...
Click to collapse
yes, i knew it... when i change it to API 16, it still won't deodexed...
yayakuya said:
yes, i knew it... when i change it to API 16, it still won't deodexed...
Click to expand...
Click to collapse
If u want Upload them, I'll give a try.
Sent from my C1605 using xda
andro-SYR said:
If u want Upload them, I'll give a try.
Sent from my C1605 using xda
Click to expand...
Click to collapse
is it only for both .jar files, or should be whole inside framework folder?
yayakuya said:
is it only for both .jar files, or should be whole inside framework folder?
Click to expand...
Click to collapse
No just the unodexed jar's with there .odex
Sent from my C1605 using xda app
can i use it for only root E dual JB sir ? since i'm not sure why my device cannot be unlocked boot loader though it say YES on bootloader unlock section and use UBL KEY from Sony...
Anyway, great work sir :good:
Keep it up
yes !
Well done , all done , you are my god
Just one thing : SystemUI.apk dont want install on my new android custom.
All righ with you or a manipulation is necessary ?
BR
A c1605 user
gbadcool said:
can i use it for only root E dual JB sir ? since i'm not sure why my device cannot be unlocked boot loader though it say YES on bootloader unlock section and use UBL KEY from Sony...
Anyway, great work sir :good:
Keep it up
Click to expand...
Click to collapse
If u succeeded in installing CWM on ur dev then u can install this ROM.
Sent from my C1605 using xda app
neflerine said:
Well done , all done , you are my god
Just one thing : SystemUI.apk dont want install on my new android custom.
All righ with you or a manipulation is necessary ?
BR
A c1605 user
Click to expand...
Click to collapse
Did u follow the installation steps?
Anyway i'll make flashable zip when the electricity is back.
Sent from my C1605 using xda app
re
Yep I followed them
CWM done
Custom ROM done
just apk say me error while installing
I hope to be port for tipo dual...
neflerine said:
Yep I followed them
CWM done
Custom ROM done
just apk say me error while installing
Click to expand...
Click to collapse
ok, just flash the SystemUI.zip
check second post
enjoy
tm.bax said:
I hope to be port for tipo dual...
Click to expand...
Click to collapse
if u mean the Rom: I don't think its possible due to hardware differences
if the SystemUI u can upload yours and I may mod it
re
I tried ES file explorer, no message, no change
I tried flash with CWM the .zip : android say me at startup SystemUI.apk shutdown because error, and no change.
Maybe I have to wipe data ( I already wiped cache in CWM ).
Im a noob, come on Sony
EDIT : I just test wipe data/factory reset and wipe dalvik : same message : UIsysteme.apk has unfortunately stopped
Sherlock n°1605
Finally got cwm on my C1605 JB
N flash ur deodexed flawlessly :good:
I'm not dev so just looking for more upcoming development for this device
Thanks so much sir
sorry for waiting
andro-SYR said:
No just the unodexed jar's with there .odex
Sent from my C1605 using xda app
Click to expand...
Click to collapse
here's both files you asked...
i hope you can make it :fingers-crossed:
thanks before bud...
Br,