Database Info

[TUT] Telus HTC Desire *UPDATED* - Windows Drivers, Root, Radio and ROM Instructions

Ok, so I just took the tutorial written by Slimdizzy and have modified it for Windows users, as he stated he was using a Mac, and a lot of people seem to be having issues getting this working. Go easy on me this is my first TUT write up, I hope it helps......If anyone has a correction or a suggestion please let me know.
Credit goes to Slimdizzy for his original post here:
http://forum.xda-developers.com/showthread.php?t=750888
When I rooted my Telus HTC Desire the first time it was hit and miss, if I remember correctly I did it 3 times until it worked 100%, by this I mean Unrevoked/Root ran without hitch, and after running Unrevoked I was able to reboot into Android, and then reboot back into recovery on my first try without any weirdness.....
The following steps are what I did to get my drivers installed and working the first time, rooting the phone, installing Radio 5.09.00.20, and getting a custom ROM installed (I used OpenDesire)
First things first you need the drivers, this is the most important part. Nothing will ever work for you if you don't have the right drivers installed.
Drivers:
1. Download the Android SDK here: http://dl.google.com/android/android-sdk_r06-windows.zip
2. Unzip and place the files in C:\Android. You can place the files wherever you want but my steps will use this location.
3. Run SDK Setup.exe , if you get the Failed to fetch URL error, hit close and then go to Settings and enable Force https://. Then click on Available Packages, near the bottom you will see USB Driver Package, place a check mark beside it and then click Install Selected.
Alternatively you can try using these drivers, they have worked for other users but I have not installed my drivers using this method so I can't say how well they will work.....
http://www.unrevoked.com/rootwiki/lib/exe/fetch.php?hash=908951&media=http%3A%2F%2Fwww.unrevoked.com%2Frecovery%2Fandroid-usb-driver.zip
4. Android SDK will download your drivers and place them here C:\android\usb_driver.
Now plugin your Desire with USB Debugging enabled (Settings --> Applications --> Development). Windows will prompt you for the device drivers, point windows to the C:\android\usb_driver folder and it should do it's thing. YOU MUST BE SURE TO INSTALL THE ADB DRIVERS, without those Unrevoked will not run.
5. Once all your drivers are installed, you can verify them by checking with the Android SDK
Open a DOS prompt (CMD in the Run box) and navigate to C:\android\tools and then type "adb devices", it should return a funny device name/ID, if you see a device listed then you are good to go, if you don't then repeat these steps until you do, check your Device Manager for an uninstalled device/driver.
***UPDATED***
Steps for Rooting:
***Follow these steps after you are 100% sure you have the drivers right!***
***DO NOT plug you Desire into your computer yet***
1. Goto http://unrevoked.com and download the software
2. You now have a choice of recovery, Amon RA has released an SLCD version of his recovery, which in my opinion is much better, it has a few more features than Clockwork. I recommend Amon RA, but the choice is yours.
Amon RA Recovery v1.7.0.1 R5 SLCD: http://dl.dropbox.com/u/4481275/recovery-RA-desire-v1.7.0.1-R5-SLCD.img
Clockwork v2.5.0.7 SLCD:http://koush.tandtgaming.com/recoveries/recovery-clockwork-2.5.0.7-bravo.zip
3. Go to HBOOT, this is done by shutting down your phone and powering on the device while holding the Power button down and pushing Volume down at the same time, once HBOOT is loaded do a wipe (Clear Storage). You can navigate the menus by using the volume rocker and the Power button to select your option.
4. Load Unrevoked and load the custom SLCD recovery file on your PC:
Goto File>Custom Recovery and point it to the recovery image that you downloaded in step 2.
5. Restart your phone, it will take a few minutes because you did a wipe, just wait it will load (up to 5 minutes). As soon as the welcome screen loads plug your phone in to the PC and Unrevoked should do it's thing. If Unrevoked doesn't start, then hit the Menu button go to Settings --> Applications --> Development and enable USB debugging.
6. The phone will restart a couple of times, and will look like it's hanging on the HTC screen but it's not! If the HTC screen is present for more than 5 minutes pull your battery and start again ( I had to do this a couple times myself). If Unrevoked pauses half way through its process, it could be because for some reason you don't have the proper drivers installed. You can load them as Unrevoked does the root process, while the phone is rebooting if Unrevoked pauses and Windows prompts you for a driver point it to the C:\android\tools directory and it will load the drivers and Unrevoked will continue its root process.
7. When Unrevoked is finished you will be left at the recovery screen,
8. *** VERY IMPORTANT*** Before restarting do a "wipe cache partition", "factory reset". And now would be a good time for a Nandroid Backup
9. Now reboot, and Android should load. Check for Superuser Permissions app, if you see it you're good if not restart from step 3.
10. Shutdown and load HBOOT, wait a few seconds for SD card (you'll see something try to load quickly), then load recovery again, it should load everytime without issue now.
It may take a few tries, but just follow these steps and it will work.
Steps for flashing radio, and custom ROM:
1. Grab a custom ROM from the forum, I used OpenDesire: http://forum.xda-developers.com/showthread.php?t=712615
OpenDesire comes with a nice reboot to Recovery feature built in.
2. Once zip is download, copy it to your SD card
3. Get the updated radio needed from here: http://www.mightyrom.com/mrx/MRX/Bravo/Radio/Signed/32.44.00.32U_5.09.05.30_2.zip
4. Reboot into recovery by powering on the device while holding the Power button down and pushing Volume down at the same time. Select Recovery with the Volume rocker and then click the power button to launch it.
5. Select "install zip from SD card" using the trackpad and select the radio zip that you download in step 3.
6. Let it do its thing (could take up to 10 mins to finish), use the back button to get to main menu and select "reboot system now" with the trackpad. If your phone hangs after rebooting wait at least 10 minutes before pulling the battery, it could be finishing the radio update.
7. Once rebooted check that the new radio is good by loading HBOOT (you should know how to do this by now) and at the top it will show you're radio version.
8. Load recovery again and select "wipe cache partition", "factory reset" (for the 3rd and final time). Then select "install zip from SD card" using the trackpad and select the ROM zip that you download in step 1.
9. The new ROM is now installed, restart the phone and wait up to 20 minutes (it shouldn't take that long) for the new ROM to load, DO NOT PULL YOUR BATTERY UNTIL AT LEAST 20 MINUTES HAVE PASSED.
You should now have your phone rooted, new radio installed, and a new custom ROM loaded.
Sorry for such a long post, but I found all these steps necessary to get the end result.
If I have missed anything or if anyone has comments / corrections post them here and I will try to keep the tutorial updated and easy to use as possible.

Great post man. I found the "dont plug the phone in yet" part out the hard way. I thought I had busted it on the 1st try!
Couple of things.
USB debugging is under development in Apps. (not a big deal)
Those unrevoked drivers worked great for me, I followed the instructions in the HTML doc that came with the zip. I have heard there are extra drivers needed for windows 7, and you have to be sure your running unrevoked as an admin.
Once I was rooted, I used RomManager to get the newest clockwork and flashed it. I used rom manager to flash the rom, HBoot to flash the radio, and did it backwards. Seems to not make a difference.
Thanks for doing this!
Edit: you forgot the most important part! Always Nandroid backup, and copy all the files from the SD card as soon as you are rooted incase something goes wrong.
Below may be wrong info, but it is what happened to me.
//////////////Extra tip, if you format an SD card, be sure you copy back the clockwork files before you unmount the card. I didn't and could not boot at all untill I copyed all the files back. I went straight to a nandroid without trying to boot into android, so I don't know if I messed up Android, but I know it would not boot to anything untill I fixed the SD card.
////////////////////

ajanu said:
Extra tip, if you format an SD card, be sure you copy back the clockwork files before you unmount the card. I didn't and could not boot at all untill I copyed all the files back. I went straight to a nandroid without trying to boot into android, so I don't know if I messed up Android, but I know it would not boot to anything untill I fixed the SD card.
Thanks for doing this!
Click to expand...
Click to collapse
Can you elaborate on this? I'm assuming Clockwork recovery is stored on the SD card?

BIGGGG THANKS, I will try tonight.

Below may be wrong info, but it is what happened to me.
//////////////Yes there is a folder called clockwork mod, in there were my nandroid backups. I copied everything on the SD back and Clockwork booted, so I can't say for sure, but I'd assume all you need is the clockwork folder. There are other folders that look like system folders that may also be important./////////////

ajanu said:
Great post man. I found the "dont plug the phone in yet" part out the hard way. I thought I had busted it on the 1st try!
Couple of things.
USB debugging is under development in Apps. (not a big deal)
Those unrevoked drivers worked great for me, I followed the instructions in the HTML doc that came with the zip. I have heard there are extra drivers needed for windows 7, and you have to be sure your running unrevoked as an admin.
Once I was rooted, I used RomManager to get the newest clockwork and flashed it. I used rom manager to flash the rom, HBoot to flash the radio, and did it backwards. Seems to not make a difference.
Extra tip, if you format an SD card, be sure you copy back the clockwork files before you unmount the card. I didn't and could not boot at all untill I copyed all the files back. I went straight to a nandroid without trying to boot into android, so I don't know if I messed up Android, but I know it would not boot to anything untill I fixed the SD card.
Thanks for doing this!
Edit: you forgot the most important part! Always Nandroid backup, and copy all the files from the SD card as soon as you are rooted incase something goes wrong.
Click to expand...
Click to collapse
This is exactly the part I wanted, when I had to use nandroid

ajanu said:
Yes there is a folder called clockwork mod, in there were my nandroid backups. I copied everything on the SD back and Clockwork booted, so I can't say for sure, but I'd assume all you need is the clockwork folder. There are other folders that look like system folders that may also be important.
Click to expand...
Click to collapse
I believe this is misinformation.. only reason because I was having that endless HTC frozen screen so I formated my SD card, the FAT32 partition and the EXT3 partition in windows using Paragon Partition Manager, finally got back into recovery, wiped everything from cache to davlik cache as well.. then installed my rom.
If Clockwork was stored on the SD card.. I believe it wouldn't have booted.. got a little confused there. However, the Nandroid backups are stored on the SD card.. that I know for sure!

quazis said:
I believe this is misinformation.. only reason because I was having that endless HTC frozen screen so I formated my SD card, the FAT32 partition and the EXT3 partition in windows using Paragon Partition Manager, finally got back into recovery, wiped everything from cache to davlik cache as well.. then installed my rom.
If Clockwork was stored on the SD card.. I believe it wouldn't have booted.. got a little confused there. However, the Nandroid backups are stored on the SD card.. that I know for sure!
Click to expand...
Click to collapse
These devices make no sense to me. Maybe I didn't help anything with the copy and just trying to boot a few times would work. I would expect things to work or not work, but they work intermittently some times. Certainly increases the confusion/frustration levels.

Wouldnt be using the latest radio and using "recovery-clockwork-2.5.0.7-bravo.img" instead of the old one be better?

Juggalo_X said:
Wouldnt be using the latest radio and using "recovery-clockwork-2.5.0.7-bravo.img" instead of the old one be better?
Click to expand...
Click to collapse
Link has been updated to reflect the latest Clockwork recovery version.
Thank you!

Blowtoke said:
Link has been updated to reflect the latest Clockwork recovery version.
Thank you!
Click to expand...
Click to collapse
No problem and here is a link to the new radio if you want to update it. it appears to be much better then the one linked in tut. Here it is

Juggalo_X said:
No problem and here is a link to the new radio if you want to update it. it appears to be much better then the one linked in tut. Here it is
Click to expand...
Click to collapse
Radio link updated as well, thanks!

quazis said:
I believe this is misinformation.. only reason because I was having that endless HTC frozen screen so I formated my SD card, the FAT32 partition and the EXT3 partition in windows using Paragon Partition Manager, finally got back into recovery, wiped everything from cache to davlik cache as well.. then installed my rom.
If Clockwork was stored on the SD card.. I believe it wouldn't have booted.. got a little confused there. However, the Nandroid backups are stored on the SD card.. that I know for sure!
Click to expand...
Click to collapse
What is EXT3 partition ?
I would like to get more details about the sdcard ? I make my backup with nandroid and after I format the sdcard....so if I want restore the back up from Nandroid, it will not be there....sorry for the noob questions

fourire said:
This is exactly the part I wanted, when I had to use nandroid
Click to expand...
Click to collapse
This step has been added to the guide....thank you!

fourire said:
What is EXT3 partition ?
I would like to get more details about the sdcard ? I make my backup with nandroid and after I format the sdcard....so if I want restore the back up from Nandroid, it will not be there....sorry for the noob questions
Click to expand...
Click to collapse
Ext3 partition is for A2SD, I never touched my SD Card until I was rooted, updated radio, and loaded a custom ROM. I can't say whether or not the SD card plays a role in freezing during boot to recovery or not? But like I said I never partitioned my SD until after everything was done.....

Very good tutorial !
Thank you

After all that, what's about the apps, contacts, calendar ?
And for this file: 2. Get the needed recovery image from here: http://koush.tandtgaming.com/recover....0.7-bravo.zip... is it for slcd ?

fourire said:
After all that, what's about the apps, contacts, calendar ?
And for this file: 2. Get the needed recovery image from here: http://koush.tandtgaming.com/recover....0.7-bravo.zip... is it for slcd ?
Click to expand...
Click to collapse
Recovery-clockwork-2.5.0.7-bravo.zip has been confirmed to work with SLCD, the link has been updated.
Thanks!

ok - at step 8
8. *** VERY IMPORTANT*** Before restarting do a "wipe cache partition", "factory reset". And now would be a good time for a Nandroid Backup
Can someone point me to a nandroid backup tutorial.

Blowtoke said:
I've posted a question on the Clockwork forum to find out if the latest version (recovery-clockwork-2.5.0.7-bravo.zip) works with SLCD, once I get an answer I will update the link if necessary.....for now it's reverted back to the old recovery img that I know works....
Thanks!
Click to expand...
Click to collapse
It works ive flashed it as my recovery img

[Q] Installing Hellfire Phoenix

I'm about to get a g2x very soon, and i heard that the stock rom sucks and that Hellfire Pheonix's is best. The instructions given on the op was not very beginner friendly, so i'm a bit confuse. This is going to be my first android and i would appreciate it if someone could link me to some sort of reference and tutorial for the installation of Hellfire Phoenix.
I've searched and google, but i had no luck. If you guys know if a detailed tutorial is out there, then just tell me and i'll put more effort into finding my answer. Thank you very much.
EDIT: To be more specific, what threw me off was "DO NOT use CWM to load the rom to your SD card. CWM has been known to cause file corruption when using it to transfer the zip file.". From all the tutorials that i've read and seen, they all use cwm. what are the alternatives?

Trung Lam said:
I'm about to get a g2x very soon, and i heard that the stock rom sucks and that Hellfire Pheonix's is best. The instructions given on the op was not very beginner friendly, so i'm a bit confuse. This is going to be my first android and i would appreciate it if someone could link me to some sort of reference and tutorial for the installation of Hellfire Phoenix.
I've searched and google, but i had no luck. If you guys know if a detailed tutorial is out there, then just tell me and i'll put more effort into finding my answer. Thank you very much.
EDIT: To be more specific, what threw me off was "DO NOT use CWM to load the rom to your SD card. CWM has been known to cause file corruption when using it to transfer the zip file.". From all the tutorials that i've read and seen, they all use cwm. what are the alternatives?
Click to expand...
Click to collapse
What it means is don't boot into CWM and mount usb storage and copy files to sd card from there because it is known to corrupt the file and then could end up in a bad flash and it could harm ur phone.
When ur gonna copy the rom ur gonna flash to ur sd card, make sure ur booted into android first and mount usb storage from there.
Hope this helped
Sent from my LG-P999 using XDA App

russell956956 said:
What it means is don't boot into CWM and mount usb storage and copy files to sd card from there because it is known to corrupt the file and then could end up in a bad flash and it could harm ur phone.
When ur gonna copy the rom ur gonna flash to ur sd card, make sure ur booted into android first and mount usb storage from there.
Hope this helped
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Correct.
Now, to fully answer your question:
Ok, adding this in after I wrote this to make things clearer: before starting make sure you:
1. Have G2x scrubber in the root of your SD card
2. Have the zip for your ROM (HFP in this case) in the root of your SD card
3. Have a copy of gapps (Google Apps) in the root of your sd card, get it here
4. After flashing CWM make a back-up (nandroid) of your stock ROM via CWM
First you need to flash Clockwork Mod (CWM) on your phone go here for that:
http://forum.xda-developers.com/showthread.php?t=1056847
Also, note: NEVER use ROM manager to flash CWM.
Second grab G2x scrubber from the HFP thread.
Next boot into CWM by holding volume down and power at the same time as the phone starts up. I find it helpful to count to three (eg, one one thousand, two one thousand, etc) after the blue and white (as opposed to plain white) LG logo first appears, that way you will have your finger off the power button when CWM starts. And in case it needs to be explained: you navigate CWM via the volume keys and make selections with the power button.
So, having downloaded G2x scrubber to your phone, go to "install zip from SD card" then "choose zip from SDcard" and navigate to G2x scrubber, run it twice.
Once that is done, use the same install zip option and this time choose the HFP zip.
Next select the gapps zip and flash it.
You're all done. Reboot and enjoy.

Thanks for the helpful replies! I feel very confident about modding my g2x when i get it now!
EDIT: Do i need to root my phone if i'm going to install HFP?

Trung Lam said:
Thanks for the helpful replies! I feel very confident about modding my g2x when i get it now!
EDIT: Do i need to root my phone if i'm going to install HFP?
Click to expand...
Click to collapse
No, just use NVFlasher to flash ClockWorkMod Recovery, then flash your rom. You'll be rooted when you finish.

I found good guides on TheUnlockr. There are links in the thread discussing Hellfire Sandwich (HFS). If you don't need wifi calling or the ability to take video I would recommend using HFS v1.2. It is an update to ICS (Android 4.0.x) but it is not completely stable yet.

Волк said:
Correct.
Now, to fully answer your question:
Ok, adding this in after I wrote this to make things clearer: before starting make sure you:
1. Have G2x scrubber in the root of your SD card
2. Have the zip for your ROM (HFP in this case) in the root of your SD card
3. Have a copy of gapps (Google Apps) in the root of your sd card, get it here
4. After flashing CWM make a back-up (nandroid) of your stock ROM via CWM
First you need to flash Clockwork Mod (CWM) on your phone go here for that:
http://forum.xda-developers.com/showthread.php?t=1056847
Also, note: NEVER use ROM manager to flash CWM.
Second grab G2x scrubber from the HFP thread.
Next boot into CWM by holding volume down and power at the same time as the phone starts up. I find it helpful to count to three (eg, one one thousand, two one thousand, etc) after the blue and white (as opposed to plain white) LG logo first appears, that way you will have your finger off the power button when CWM starts. And in case it needs to be explained: you navigate CWM via the volume keys and make selections with the power button.
So, having downloaded G2x scrubber to your phone, go to "install zip from SD card" then "choose zip from SDcard" and navigate to G2x scrubber, run it twice.
Once that is done, use the same install zip option and this time choose the HFP zip.
Next select the gapps zip and flash it.
You're all done. Reboot and enjoy.
Click to expand...
Click to collapse
Thank you very much! Волк, Your instruction is very helpful. I run the Hellfire V2.0 two days. So far So good. And thank you very much! x0xhellx0x, You are genius!

[GUIDE] From stock GB to Custom JB (Noob-friendly)

STOCK GB ALL THE WAY TO JB CUSTOM ROM
If you run Gingerbread, start from A directly
If you run un-rooted Jellybean, start from B
If you run rooted Jellybean with a custom kernel, start from C.
If you run rooted Jelly Bean without a custom kernel, start from B, but skip number 1 and 6.
You might want to read this before starting, it is optional though, but will give you a better idea of what you're doing.
GUIDE
This guide shall guide you through turning your suckish GB i9070 (not i9070p) to Custom ROM JB Awesomeness.
Unless your phone shipped from Russia, it probably has Gingerbread preinstalled... so, let's first Jellybeanize it.
A) JELLYBEANIZATION:
Download Odin3 from here. http://forum.xda-developers.com/atta...1&d=1341114315. Extract it into a folder.
Download Stock JB firmware from here. http://hotfile.com/dl/222710569/1f2...m-GT-I9070-TSR-I9070XXLQE-1365486223.zip.html . Extract it into a separate folder, you will get a .tar.md5 file.
Make sure you have Kies installed, but not running.
Turn your phone off, and boot into Download mode, this can be done by holding the Vol.Down+Home+Power buttons together at the same time, till it boots.
Press Volume up to continue. Plug in your phone (make sure it's at least 60% charged) . Wait till Odin recognizes (It should say something like COMORT... to the left).
Click on PDA and choose the firmware (.tar.md5) that you extracted in step 2. Click start.
Right now, a virus which will fry your phone's internals is being installed... Calm down, joke.
When your phone boots into JB, and Odin says "PASS". Unplug.
NOTE: There is a chance that you will get a bootloop ( i.e. Android won't boot ). No, no, no... your phone isn't broken! Simply reboot to stock recovery by powering off, then pressing Vol.Up+Home+Power buttons together and wipe data/factory reset. It'll boot nicely
Now, you are currently on a stock Samsung Jellybean firmware, which is not rooted. This basically means that you do not have access to modifying the system files in your ROM, which means that you cannot install any custom kernel, custom recovery or a custom ROM... In section B, you will learn how to gain root access, install a custom kernel with a custom recovery.
B) ROOTING, KERNEL & TWRP/CWM:
Download Shaan's root from here http://d-h.st/ook
Download Temporary cwm from here http://forum.xda-developers.com/show....php?t=1987313
Download CoCore + TWRP (TWRP is one of the two recoveries available, we will use it in this guide because it looks less intimidating, and it's touch-enabled ) from here http://forum.xda-developers.com/atta...8&d=1363518705
Place all 3(or 2 if you're rooted) zip files in your external SD card
Power off. Boot into recovery by holding Vol.Up+Home+Power.
By navigating via volume buttons, choose install zip from external sd card, and install root.zip... shouldn't take long.
In the same way install update.zip. Now in a few seconds, you will get a different screen, this is Clockworkmod recovery, albeit a temporary one..
In this recovery, go to install zip, then install zip from external sd, and choose CoCore+TWRP. After installation, keep going back until the main cwm screen, and hit reboot.
NOW, Everytime you boot into recovery (which is the way to backing up and installing custom ROMs) you will get TWRP.
Now, you are rooted, with a custom kernel, and TWRP ( a custom recovery). You can either stay on stock Samsung firmware, or continue through section C, and get yourself a custom ROM.
C) INSTALLING A CUSTOM ROM:
Download any custom ROM (Recommendations at the end of the thread) zip and place it in the root of your external (or internal, but i prefer ext.) sd.
Boot into recovery.
Navigate by touch, press backup, and slide as instructed to make a backup.
Go back to the main screen and choose install. If the zip has been placed in ext. sd. then press on external sd and choose the appropriate zip and slide to install. If placed in internal sd, then choose internal sd from the top and go to /emmc folder, and choose zip and install.
When finished, navigate to the recovery home, and press reboot sytem.
Frequently Asked Questions
Q- Which of the above will increase my binary counter?
A- None! Let me clarify how the binary counter is tipped. The only way the binary counter can be increased is if you flash anything that is non-official Samsung signed, via Odin.
Q- How do I unroot?
A- You can unroot simply by following the steps in section A and not continuing with the rest of the guide.
Q- I encountered a problem, what now?
A- If the problem is related to this guide and the steps followed in this guide, then post it here, I'll try to help when possible. If you encountered a general problem not related to this guide, please post a thread in the Q&A/Troubleshooting section.
ROM Recommendations
If you want a fully stable ROM, with everything working, Cyanogenmod or Cyanogenmod based ROMs currently do not fit the cirteria, as they some bugs still remain in these. So, you may try one of the stock based ROMs.
[AOSP Themed] - JellyMod - by martin_carpio17 Link here
[S4 Themed] - Light JB - by petraru1 Link here
[AOSP Themed] - Pure Vanilla - by ikaster17 Link here
[Xperia UI Themed] Galaxperia - by Achyut Link here
However, if you'd still like to go for most change, and don't mind the small bugs, then you may try Cyanogenmod or the Cyanogenmod based ROMs below.
Cyanogenmod 10 - by diego-ch and other contributing developers Link here
MIUI v4 - by fedevd Link here
Paranoid Android Port - by nlygamz Link here
Cyanilla - by ikaster17 Link here
This is basically it for this tutorial! Finally eh? But really now, all the above is very very easy once you get used to it, I mean, all the sections in the guide, A, B and C can all be done in 5 minutes, but I've simplified everything as to suite everyone's experience.
Hopefully this guide was useful for you...

If I made any mistakes with this, please correct me

Odp: [GUIDE] From stock GB to Custom JB (Noob-friendly)
That would be very usefull
If only tons of familiar topics wasn't already created ...
tapatalked

rajman said:
That would be very usefull
If only tons of familiar topics wasn't already created ...
tapatalked
Click to expand...
Click to collapse
Excuse me for trying to contribute.

panda00 said:
Excuse me for trying to contribute.
Click to expand...
Click to collapse
You have done a good job. Remember, haters gonna hate
Sent from my GT-I9070 using xda premium

Plus, I provided this for newbies who have little to no idea about rooting and the works...

Odp: [GUIDE] From stock GB to Custom JB (Noob-friendly)
Brainiac.shri said:
You have done a good job. Remember, haters gonna hate
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Yup, thanks button is to mainstream.
Hating is way more vintage
tapatalked

Added and corrected some things... Thanks R_a_z_v_a_n for the corrections.

Your welcome!

there is anyway to add brazilian portuguese language?

fromanbr said:
there is anyway to add brazilian portuguese language?
Click to expand...
Click to collapse
I don't think so... until a official JB firmware with the language is released.

Up.. since people are still asking how to root and etc.

Up

A million thanks for the guide .. I've installed Jetmod 4.0 and it's running fine. My only concern is that I created a backup of my previous ROM in the internal storage and now just 33MB space is available for installation of apps. Can you please tell me how to 1. Remove the backup, or 2. Move it to the external storage ?
Thanks !

Go to "my files" - internal (sdcard0 I suppose) select what file u want to move an move to external memory (sdcardExt).

R_a_z_v_a_n said:
Go to "my files" - internal (sdcard0 I suppose) select what file u want to move an move to external memory (sdcardExt).
Click to expand...
Click to collapse
I have already tried that, but I am not able to identify the backup. I had used to TWRP to backup and then flash JellyMod. I had looked up on some threads that the backup will be in SD -> TWRP -> Backups (or something similar to this), but there is no such folder in my phone.
:crying:

ttrublu said:
I have already tried that, but I am not able to identify the backup. I had used to TWRP to backup and then flash JellyMod. I had looked up on some threads that the backup will be in SD -> TWRP -> Backups (or something similar to this), but there is no such folder in my phone.
:crying:
Click to expand...
Click to collapse
Look for it using Root Explorer (download the app from the play store).

ttrublu said:
I have already tried that, but I am not able to identify the backup. I had used to TWRP to backup and then flash JellyMod. I had looked up on some threads that the backup will be in SD -> TWRP -> Backups (or something similar to this), but there is no such folder in my phone.
:crying:
Click to expand...
Click to collapse
in your file manager browse to ext_sd. from within ext_sd you should have a folder labeled nandroid..
also, by default, the backups should be labeled/dated accordingly..
you could also get details on each file from within file manager that will give you more specific info. date created, etc..
hope this helps..

Thanks guys, but I think I didn't make myself clear. The backup is present in the 2GB memory reserved for installing apps. How do I access that storage and remove the backup? I'm an android beginner, so pls have patience with me.

ttrublu said:
Thanks guys, but I think I didn't make myself clear. The backup is present in the 2GB memory reserved for installing apps. How do I access that storage and remove the backup? I'm an android beginner, so pls have patience with me.
Click to expand...
Click to collapse
in the "My Files" folder on your phone..
you will see All Files.. select it and youll see extSdCard and sdcard..
go to sdcard to navigate to your back up files after that move them to your memory card extsdcard..
voila.. free space..

[Q] Help: No software installed and can't boot

Hi guys
It has been a long time since my phone has been this bad.
So last night I go to charge my phone because I had ZERO battery. So I turned it on and then plugged it in. The phone booted fine but then I noticed that the screen was not shutting off. I even tried hitting the "Go to sleep" button from the pull down menu and nothing happened. I also realized the phone was not loading my calendar. When I went into the file manager it didn't show SDCARD 1 or 2.
I decided to clear the memory (dalvik + cache) = SAME PROBLEM
I did a factory restore = same problem
Finally I cleared the system = now i have no OPERATING SYSTEM ON THE PHONE
I went to the external sd card and tried to install the latest version of OMNI....IT SAYS IT CANT READ FROM THE SD CARD.
I also tried to copy the file from external sd to internal sd card and it says FAILED
I don't' know what to do...
I am using Team Win Recovery Project 2.6.3.0
I have the latest omni rom on my external sd card. I can see it but install fails.
Please help :crying:

mfisher0 said:
Hi guys
It has been a long time since my phone has been this bad.
So last night I go to charge my phone because I had ZERO battery. So I turned it on and then plugged it in. The phone booted fine but then I noticed that the screen was not shutting off. I even tried hitting the "Go to sleep" button from the pull down menu and nothing happened. I also realized the phone was not loading my calendar. When I went into the file manager it didn't show SDCARD 1 or 2.
I decided to clear the memory (dalvik + cache) = SAME PROBLEM
I did a factory restore = same problem
Finally I cleared the system = now i have no OPERATING SYSTEM ON THE PHONE
I went to the external sd card and tried to install the latest version of OMNI....IT SAYS IT CANT READ FROM THE SD CARD.
I also tried to copy the file from external sd to internal sd card and it says FAILED
I don't' know what to do...
I am using Team Win Recovery Project 2.6.3.0
I have the latest omni rom on my external sd card. I can see it but install fails.
Please help :crying:
Click to expand...
Click to collapse
Calm down dear. Same happened with me. I formatted /system and find that I don't have any operating system in my mobile.
Just pluggin your mobile in recovery mode to your PC. transfer the file-> Flash the ROM-> Gapps -> BINGO..
BTW, wrong area for creating a thread.

Don't worry. Do what D™ said.
Alternatively you can use "adb sideload" method. I used it once with Philz recovery. In sideload method, you won't need to copy the file in Sdcard. File existing on pc can be directly flashed. This would help if you still face problems copying file to Sdcard. Search it on google. You will find steps for it.

A bit more clear please...
D™ said:
Calm down dear. Same happened with me. I formatted /system and find that I don't have any operating system in my mobile.
Just pluggin your mobile in recovery mode to your PC. transfer the file-> Flash the ROM-> Gapps -> BINGO..
BTW, wrong area for creating a thread.
Click to expand...
Click to collapse
Hey
Ok I am a bit calmer knowing I didn't brick my phone or anything...
But when I connect my phone to my computer I know it is connected (I see GTi9103 in device manager with an "!" ) but I cant transfer files.
Could someone provide a link to the adb method or maybe give a bit more advice on this problem..
Thank you guys!

mfisher0 said:
Hey
Ok I am a bit calmer knowing I didn't brick my phone or anything...
But when I connect my phone to my computer I know it is connected (I see GTi9103 in device manager with an "!" ) but I cant transfer files.
Could someone provide a link to the adb method or maybe give a bit more advice on this problem..
Thank you guys!
Click to expand...
Click to collapse
It must installed drivers.. If u cant access the storage, just flash ics via odin and further known actions.
Sent Using my MOTO© G® from Tapatalk Pro - D™

Thanks dude! I will give it a try and post a response! It was just so strange that I couldn't see any of the drives (sdcard 1 or 2) in filemanager. I guess something must have got corrupted? Right now I am trying to push from adb method mentioned from Nikhil.
I am following this procedure.
http://hackerspace.lifehacker.com/how-to-install-a-rom-via-sideload-1505153925
PS. the android SDK is massive!

ADB FAIL
ADB IS WAY TOO complicated for me right at this moment (actually exhausted).
********Can someone provide me with a ICS download link? *******************
I'm going to try out the ODIN method
http://forum.xda-developers.com/showthread.php?t=1406664
again thanks to ALL who are constantly helping out!

mfisher0 said:
ADB IS WAY TOO complicated for me right at this moment (actually exhausted).
********Can someone provide me with a ICS download link? *******************
I'm going to try out the ODIN method
http://forum.xda-developers.com/showthread.php?t=1406664
again thanks to ALL who are constantly helping out!
Click to expand...
Click to collapse
Download Stock Indian ICS
Btw, adb sideload method is as follows.
0. Install adb for windows (assuming you have windows). (There shouldn't be any driver missing)
1. Enter into sideload mode in recovery
2. Open cmd in computer with the directory in which zip file is kept. (shift + right click -> open command prompt here would do)
3. Enter adb sideload xyz.zip
Thats it.
I've tried it with TWRP recovery in my friend's phone. It didnt work. But When I tried with Philz recovery, It worked well.
Anyway, if you are finding it complicated, flash stock ics.
Edit : Did you try "mount usb storage" in recovery? because it is required to do. else computer won't recognize your device.

success!
OK so I successfully flashed via ODIN....Can I directly flash omni now? I am assuming yes...Can I flash it through ODIN?
Also can you recommend any good versions of ICS? It is really quite a bit faster than omni...
AGAIN thank you all

mfisher0 said:
OK so I successfully flashed via ODIN....Can I directly flash omni now? I am assuming yes...Can I flash it through ODIN?
Also can you recommend any good versions of ICS? It is really quite a bit faster than omni...
AGAIN thank you all
Click to expand...
Click to collapse
Omni is best until now.
you can't flash omni via odin. Flash Philz or TWRP first and then flash omni.
Lv5 ZCLPD is best ICS Rom. But I would choose Omni over Lv5,

reinstall twrp?
Nikhil said:
Omni is best until now.
you can't flash omni via odin. Flash Philz or TWRP first and then flash omni.
Lv5 ZCLPD is best ICS Rom. But I would choose Omni over Lv5,
Click to expand...
Click to collapse
Do I need to reinstall TWRP>??

mfisher0 said:
Do I need to reinstall TWRP>??
Click to expand...
Click to collapse
Reinstall!
Not if you already installed it.
Read OP of discussion thread. Instructions are there. You will find everything you need.

ICS will faster for few days and then it slow down.. hang.. GB is best for our device..

[STOCK][TWRP BACKUP][UPDATE] AT&T H910_10L Stock Recovery, Boot, and System Image

Below are links to full backups that can be restored in TWRP for the H910 after the Dirty Santa exploit. This is useful for restoring a bad install once you have access to TWRP. I will outline three methods for install below that will help in putting back the TWRP backups, a good method for installing it, and a few suggestions I have from restoring my device about 10 times now. So without further ado.
UPDATE: I bricked my device and had to send it off for repair (turns out I can't just flash US996 firmware for funsies) I received my phone back with the still rootable OTA 10L and yesterday I rooted it again and uploaded the new firmware. So if you're an AT&T user who wants the second latest update (10M dropped 04-15 but it isn't rootable as far as I know) then you can grab this and run it along with the stock kernel I made a backup of. I'll update the links below to reflect this. Stock 10L kernel located in tips section. Not flashable, you must extract and install as image and immediately install SuperSU 2.79 or greater or your device won't boot!
How to Install and Restore Stock Images and Boot (Kernel) Image
1.) DOWNLOAD - https://www.androidfilehost.com/?fid=673368273298948069 (Updated to 10L) download the file and verify the MD5sum of the zip matches the file you downloaded. (System image link for devs posted at the bottom)
1a) Download the latest SuperSU 2.79 flashable zip from here: http://www.supersu.com/download
2.) EXTRACT --This is not a flashable zip-- extract the zip file wherever you would like so that it can be copied to the device
3.) COPY - The extracted folder to TWRP > BACKUPS > (paste here) on either the MicroSD card (preferable) or internal storage (This will be wiped when you format data)
4.) REBOOT TO RECOVERY - Once the folders are copied to the backup directory you can reboot to TWRP to begin the restore process.
5.) WIPE - This is getting two sections in order to account for two situations
5a) MICROSD - If you have a MicroSD card and copied the restore files to it wipe everything: Data, Cache, Dalvik/ART, Internal Storage, and System.
5b) INTERNAL STORAGE - If you don't have a MicroSD card installed only wipe the following: Data, Cache, Dalvik/ART, and System.
6.) REBOOT TO RECOVERY - Once you have wiped everything, especially if you wiped internal storage, you should reboot TWRP before you start the restore process
7.) RESTORE - Back in TWRP Choose Restore from the main menu and if you can't see your restore file choose "Select Storage" at the bottom and inside that folder uncheck RECOVERY unless you want to overwrite TWRP (which I recommend against).
7a) I would recommend checking the box "Enable MD5 Verification of Backup Files" which is a little slower but ensures a good restoration
8.) SWIPE - Swipe to begin the operation and it will alert you upon completion. You will need a very large amount of space on your card to do it since the system image is split into 3 packages
9.) ROOT - Do not reboot until you have rooted! The unlocked bootloader will prevent booting on the stock kernel. The stock kernel can be used if it is rooted first, otherwise you will be stuck on the LG Boot logo.
10.) REBOOT TO SYSTEM - The phone will reboot itself! Don't panic, this is part of the standard rooting procedure. Now, see tips at the bottom for best performance.
TIPS!
- This is the 10L update stock kernel made during dirty santa method. This kernel has all features working minus the static on boot being gone, but Wifi calling, comfort view, FM radio, etc are fixed using this kernel. https://www.androidfilehost.com/?fid=817550096634762281 (You must flash SuperSU 2.79 or greater after flashing this kernel before you reboot! Not Flashable, must extract)
- To use the above kernel, download his ROM and extract the boot.img file from that archive. Save it to your device, boot to TWRP, choose Install, Install Image, and click the boot.img file. Then choose the checkbox for "boot" and swipe to flash. Really important to install SuperSU again after installing the custom kernel.
- Boot-up static can be cleared by allowing phone to boot to screen off, placing it face down to turn of second screen, and then flipping it back over. Static will be gone until next boot.
- Using fstrim after wiping in TWRP is good for increasing flash drive performance. Go to TWRP > Advanced > Terminal and type fstrim -v /data/
- You can do fstrim on /system and /cache as well to get all three partitions running clean
- Some of the AT&T apps that you can remove with TiBu are tied to bootup. Be careful what you remove if you like to get past the AT&T logo.
- The button combo to get into TWRP from powered off is Vol Down + Power until the LG Logo appears then let go of power and immediately press power again.
- That button combo boots you to a screen asking it you want to wipe your device. Answering 'yes' to both questions boots you to TWRP.
10L System Image Link for ROM creation (In TWRP emmc format): https://www.androidfilehost.com/?fid=745425885120724506
THANKS!
Google - Because, Android
@me2151 for the unlock and root method (and bricking his phone for us; sorry that happened to your device)
@glitschi667 for the work he did on Dirty Santa with me2151
@jcadduono for getting TWRP ready for us despite not having a V20 at all
@Tilde88 for compiling the kernel sources and creating an excellent ROM for all rooted variants of the device!
@EMSpilot for the debug phone!
@elliwigy for helping everyone troubleshoot and test everything recently
If I forgot you, and believe me a lot of people deserve to be here, let me know and I'll add you

9.) ROOT - Do not reboot until you have rooted! The unlocked bootloader will prevent booting on the stock kernel. The stock kernel can be used if it is rooted first, otherwise you will be stuck on the LG Boot logo. [/QUOTE] What exact method of rooting do you mean, without rebooting? Do you mean just flashing SuperSU? Can you clarify? THANKS for everything! Hoping this gets me out of my semi-brick. No matter what I flash...it keeps reverting back to TWRP.
EDIT: I did this, exactly...and yet again...I'm stuck in the phone autobooting back to TWRP. Any suggestions? Is this bricked?

jreed3786 said:
9.) ROOT - Do not reboot until you have rooted! The unlocked bootloader will prevent booting on the stock kernel. The stock kernel can be used if it is rooted first, otherwise you will be stuck on the LG Boot logo. What exact method of rooting do you mean, without rebooting? Do you mean just flashing SuperSU? Can you clarify? THANKS for everything! Hoping this gets me out of my semi-brick. No matter what I flash...it keeps reverting back to TWRP.
EDIT: I did this, exactly...and yet again...I'm stuck in the phone autobooting back to TWRP. Any suggestions? Is this bricked?
Click to expand...
Click to collapse
If you do a battery pull and can get to TWRP you are not bricked. However, I have no idea what you did to get a bootloop. What kernel did you install: the stock one from TWRP or Tilde88's kernel from his ROM? Either way, if you did this:
Wipe > Restore (Boot and System) > Install SuperSU 2.79 zip > Reboot
then you did the correct steps. The issue of not having SuperSU installed on my device was not booting past the LG logo and never rebooting. However, the method I most recently followed was:
Wipe > Restore (boot and system) > Install Tilde88 kernel > Flash SuperSU > Reboot
and my phone has been running extremely well. I need way more info from you before I can help you further.

AlkaliV2 said:
If you do a battery pull and can get to TWRP you are not bricked. However, I have no idea what you did to get a bootloop. What kernel did you install: the stock one from TWRP or Tilde88's kernel from his ROM? Either way, if you did this:
Wipe > Restore (Boot and System) > Install SuperSU 2.79 zip > Reboot
then you did the correct steps. The issue of not having SuperSU installed on my device was not booting past the LG logo and never rebooting. However, the method I most recently followed was:
Wipe > Restore (boot and system) > Install Tilde88 kernel > Flash SuperSU > Reboot
and my phone has been running extremely well. I need way more info from you before I can help you further.
Click to expand...
Click to collapse
Shoot...I think I followed your instructions in Tilde88's thread....and hit reboot instead of flashing his kernel. I then went back in to TWRP to reflash the entire thing...and the kernel...and I was given crap about encryption. Then, that's when the bootloop started. Right now, I'm sitting on TWRP. I've tried flashing everything, per instructions....but I guess, what I'm asking, is...since I'm on TWRP...and it's bootlooping because of encryption...what would you personally do? Shoot...I'll pay ya if you can fix this! LOL. I just really never dealt with the encryption thing until this phone...never really had problems till now.
---------- Post added at 09:28 AM ---------- Previous post was at 09:12 AM ----------
FLASHED EXACTLY THE WAY YOU DID (WITHOUT THE REBOOTING TO RECOVERY IN THE OP)...NOW, IT GETS TO STATIC, THEN LG SCREEN, REBOOTS ONCE TO STATIC THEN BOOTS UP!!! YAY!!! :good::highfive:
I guess there's no need to REBOOT TO RECOVERY if a person faces encryption issues and is trying to fix their phone. Even after decrypting, I came up with issues. Now let's see if this this asks for my PIN on reboot. THAT was another issue!
IT WORKED!!! THANKS! I'LL now try to go back into TWRP and flash the Tilde's boot.img

So...by flashing your STOCK TWRP backup...per your instructions, I was TOTALLY FIXED...I then didn't even flash Tilde88's kernel...I immediately rebooted back to TWRP, and DID NOT WIPE...but immediately flashed his ROM....and BOOM! Google Now/Always On works flawlessly, zero lag! AWESOME!
So, to all that are having issues with no Google Now/Always On...follow this instructional on this thread and DO NOT wipe after flashing Tilde's rom.
BTW, I shot you a PM, bro! :highfive::good:

jreed3786 said:
So...by flashing your STOCK TWRP backup...per your instructions, I was TOTALLY FIXED...I then didn't even flash Tilde88's kernel...I immediately rebooted back to TWRP, and DID NOT WIPE...but immediately flashed his ROM....and BOOM! Google Now/Always On works flawlessly, zero lag! AWESOME!
So, to all that are having issues with no Google Now/Always On...follow this instructional on this thread and DO NOT wipe after flashing Tilde's rom.
BTW, I shot you a PM, bro! :highfive::good:
Click to expand...
Click to collapse
Nothing like some good news to start the day. I wanted to let you know that the reason this worked is that it is essentially a dirty flash that replaces the stock kernel and adds his ROM tweaks into my stock system. So once it had booted and you flashed over it you were able to keep the stock files needed to get screen off Google Now working while adding his audio tweaks and build.prop because they overwrite the stock files. Since my stock files are odexed and his are not I'm not sure how well all your system files will function since they've been overwritten but if you have no issues then no harm, no foul.
I'm glad this got sorted and to anyone else if you follow this guide and you have any confusion about the instructions just do an @AlkaliV2 and I will do my best to help and I will also fix up the guide so that it is less confusing. Just let me know.

Stuck again....in TWRP.
Delete please

Same issue
i followed it to the letter yet i still keep being returned to team win recovery no matter what i do.

Great step by step instructions. Thanks!

sikiro said:
i followed it to the letter yet i still keep being returned to team win recovery no matter what i do.
Click to expand...
Click to collapse
Try booting into your bootloader (fastboot) and type:
fastboot erase misc
fastboot erase cache
fastboot erase fota
fastboot reboot
See if that helps you at all. Make sure you have a valid ROM flashed correctly though.

im having trouble, i downloaded the file, and i put the extracted folder into TWRP>BACKUPS but when i go to restore on TWRP theres no files to be open, am i supposed to keep the file as a zip or?

prlatorre said:
im having trouble, i downloaded the file, and i put the extracted folder into TWRP>BACKUPS but when i go to restore on TWRP theres no files to be open, am i supposed to keep the file as a zip or?
Click to expand...
Click to collapse
I was having the same issue, do a backup(choose something small) from TWRP. It will create the TWRP>Backups Folder for you and then you can place the extracted zip. from this thread into that folder and it will see it.

ajairola said:
I was having the same issue, do a backup(choose something small) from TWRP. It will create the TWRP>Backups Folder for you and then you can place the extracted zip. from this thread into that folder and it will see it.
Click to expand...
Click to collapse
i've tried what you suggested, and still nothing seems to show up, i made a back up in both internal and micro sd

prlatorre said:
i've tried what you suggested, and still nothing seems to show up, i made a back up in both internal and micro sd
Click to expand...
Click to collapse
So you created a backup of let's say the EFS partition in TWRP. You backed it up once to the internal SD card and once to the external sd card. Then you extracted the zip from step one, placed the folder inside of the backups folder and it does not appear?

how can i use this file if i i'm not rooted? My phone is being weird and i would like to reload the stock software on it.

truwrxtacy said:
how can i use this file if i i'm not rooted? My phone is being weird and i would like to reload the stock software on it.
Click to expand...
Click to collapse
You cant all you can do is factory reset on stock

jerrycoffman45 said:
You cant all you can do is factory reset on stock
Click to expand...
Click to collapse
Does the factory reset to stock also reset the recovery? Want to root phone but will most likely trade in to ATT once I'm eligible for upgrade(with trade in).

Manbot27 said:
Does the factory reset to stock also reset the recovery? Want to root phone but will most likely trade in to ATT once I'm eligible for upgrade(with trade in).
Click to expand...
Click to collapse
right now the root method for the h910 does not allow you to go back to stock

My 8gb sdcard ran out of space during step #8. Can I copy the contents of the sdcard to a bigger card and redo the full restoration from step 1?
---------- Post added at 01:27 PM ---------- Previous post was at 01:06 PM ----------
AlkaliV2 said:
So you created a backup of let's say the EFS partition in TWRP. You backed it up once to the internal SD card and once to the external sd card. Then you extracted the zip from step one, placed the folder inside of the backups folder and it does not appear?
Click to expand...
Click to collapse
Having the same issue. I copied the folder over to the microsd card and the folder I copied over isnt showing up in restore. I cant do anything or wipe anything if I cant see a backup right?
Im going to try and do the internal storage copy. No other choice.

cwis said:
My 8gb sdcard ran out of space during step #8. Can I copy the contents of the sdcard to a bigger card and redo the full restoration from step 1?
---------- Post added at 01:27 PM ---------- Previous post was at 01:06 PM ----------
Having the same issue. I copied the folder over to the microsd card and the folder I copied over isnt showing up in restore. I cant do anything or wipe anything if I cant see a backup right?
Im going to try and do the internal storage copy. No other choice.
Click to expand...
Click to collapse
If you create a backup of anything on the Microsd card before you attempt to put the folder in it, it will create the directories for you and all you have to do is copy and paste at that point.