Related
This is not a guide, I just wanted to point out something about the whole downgrade system.
I needed to downgrade my phone to take it to a service center, so i had to flash the original ROM in it. I was coming from the JB indian firmware.
I had read the downgrade thread and lots of people were reporting problems with CSC after downgrading, wich was a concern to me.
The thing is, just for the sake of it, I tried to flash GB without the PIT and CSC files, i just used the PDA posted on the guide and flashed away with Odin 1.85. The flash was successful to my surprise, and i was looking at the Gingerbread homescreen. At that point, 3G didn't work, and the CSC was blank.
Then i flashed my carrier firmware for GB (Movistar - Argentina) and after that 3G was working, and I had only one CSC on the list: TFG, wich I think is the correct one for this region and carrier.
I really don't know if this method can be reproduced, but maybe some of you can give it a shot and report back. At least this way you don't get the CSC problems.
Greetings from Argentina!
/edit: Just to clarify, the steps:
1) Enter download mode (wipes and formatting partitions opcional)
2) Flash with Odin 1.85 ONLY the PDA file "CODE_GT-I9070_I9070DXLD1_CL1068093_REV00_user_SEC_KEY_LD1_8G.tar" that can be found here: http://forum.xda-developers.com/showthread.php?t=2100642
Make sure the only boxes ticked are "Auto Reboot" and "F. Reset Time"
3) Wait for the phone to reboot
4) Once again enter download mode
5) Flash with Odin the GB Firmware for you country and/or carrier. Again, only use the PDA file downloaded from Sammobile, and make sure the only boxes ticked are "Auto Reboot" and "F. Reset Time"
6) Enjoy Gingerbread again!
Piachnp said:
This is not a guide, I just wanted to point out something about the whole downgrade system.
I needed to downgrade my phone to take it to a service center, so i had to flash the original ROM in it. I was coming from the JB indian firmware.
I had read the downgrade thread and lots of people were reporting problems with CSC after downgrading, wich was a concern to me.
The thing is, just for the sake of it, I tried to flash GB without the PIT and CSC files, i just used the PDA posted on the guide and flashed away with Odin 1.85. The flash was successful to my surprise, and i was looking at the Gingerbread homescreen. At that point, 3G didn't work, and the CSC was blank.
Then i flashed my carrier firmware for GB (Movistar - Argentina) and after that 3G was working, and I had only one CSC on the list: TFG, wich I think is the correct one for this region and carrier.
I really don't know if this method can be reproduced, but maybe some of you can give it a shot and report back. At least this way you don't get the CSC problems.
Greetings from Argentina!
Click to expand...
Click to collapse
I had the same problem trying to install Movistar's Firmware, I installed the argentine ARO firmware and it changed my CSC, but Kies still saying "XTC". I will try with your method later, because I want to have the original TFG CSC code.
mybe u can try 'csc changer' app at google play. but it will factory reset your data..make sure to backup important data. it work only with csc that are already inside your current firmware..
Sent from my GT-I9070 using xda app-developers app
hamzani azni said:
mybe u can try 'csc changer' app at google play. but it will factory reset your data..make sure to backup important data. it work only with csc that are already inside your current firmware..
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
I did it, and changed my CSC to ARO, but Kies still saying XTC.
Juaniblade said:
I did it, and changed my CSC to ARO, but Kies still saying XTC.
Click to expand...
Click to collapse
Kies is high as f**k with their XTC....
Well, try reflashing?
Sent from my GT-I9070 using Tapatalk 4 Beta
Jeroenvk94 said:
Kies is high as f**k with their XTC....
Well, try reflashing?
Sent from my GT-I9070 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I downgraded from XXLQE using OP's method and it works! But i'm stuck now with DBT code lol. I will try reflashing with another firmware with multiCSC.
so this proves that re-partitioning or using PIT file is not necessary for the downgrade process..
ODIN analyze and use the default partition of the phone..
this is a good information..
downgrade will be like a walk in the park..
I am now in doubt about the CSC, can anyone confirm that TFG is the correct one for Argentina (carrier: Movistar) ???
I tried to google CSC codes but TFG is nowhere to be found...
I was able to find this version of GB for Argentina:
Argentina (Movistar) | I9070VSLD1 ; I9070TFGLD1
so it seems like you got it correct
The phone showed everything correctly (CSC, Firmware version and Kernel) but when i connected to Kies, it still showed all the data from the India Firmware.....so i don't know. I think it's better than the other method, but still flawed.
Piachnp said:
The phone showed everything correctly (CSC, Firmware version and Kernel) but when i connected to Kies, it still showed all the data from the India Firmware.....so i don't know. I think it's better than the other method, but still flawed.
Click to expand...
Click to collapse
Same for me, but I think the problem is in the movistar's firmware. Try flashing a MultiCSC firm like ARO UBLK1 and it should work by doing a CSC change typing *#272*IMEI# in dialer.
Enviado desde mi GT-I9070 usando Tapatalk 4 Beta
Piachnp said:
The phone showed everything correctly (CSC, Firmware version and Kernel) but when i connected to Kies, it still showed all the data from the India Firmware.....so i don't know. I think it's better than the other method, but still flawed.
Click to expand...
Click to collapse
try to uninstall kies from your pc and re-install it again..
it might still have the data or cache of the old firmware that you are using before..
Definitively that's not the problem, I installed Kies for the first time in this laptop only now, AFTER downgrading.
At least if someone checks only the celphone, the information there will be the correct one. If someone could try what juaniblade proposed, that be great. I already gave my phone to the service center so i cant try it myself.
By the way, movistar (argentina) technicians didn't find anything fishy on the celphone. I think they just flash stock firmware and if the reported hardware malfunction is still there they approve the repair/replacement. They don't have the time to go all detective on your phone.
Conulta movistar galaxy advance!
Piachnp said:
This is not a guide, I just wanted to point out something about the whole downgrade system.
I needed to downgrade my phone to take it to a service center, so i had to flash the original ROM in it. I was coming from the JB indian firmware.
I had read the downgrade thread and lots of people were reporting problems with CSC after downgrading, wich was a concern to me.
The thing is, just for the sake of it, I tried to flash GB without the PIT and CSC files, i just used the PDA posted on the guide and flashed away with Odin 1.85. The flash was successful to my surprise, and i was looking at the Gingerbread homescreen. At that point, 3G didn't work, and the CSC was blank.
Then i flashed my carrier firmware for GB (Movistar - Argentina) and after that 3G was working, and I had only one CSC on the list: TFG, wich I think is the correct one for this region and carrier.
I really don't know if this method can be reproduced, but maybe some of you can give it a shot and report back. At least this way you don't get the CSC problems.
Greetings from Argentina!
Click to expand...
Click to collapse
Hey how are you! im also from argentina dude, and y have a galaxy advance which i udated to JB, (i have movistar) and i regret it. It works teribly, ive tried 4 different versions, today I installed de JB Claro release and still i have problems. The cellphone is slow, it freezes, i have problems uploading music to the SD card and recelntly im unable to open the photo gallery.
Were you having similar problems? or are you satisfied with JB and the cellphone?? I would like some feedback because not many people i know have this telephone flashed to JB. Are you going to upgrade to JB again once the service is over???de
Anyway, i would really appreciate your feedback men! te mando un abrazo!
I downgraded because i was having some hardware problems with the miniusb port.
Anyway, Jelly Bean was big frustration performance wise. Of course, from a features point of view is miles ahead of GB, but the awful performace is just not acceptable. JB stock is pretty much unusable. To make it even bearable you have to get custom kernel and some other mods (other dialer for instance because stock lags like a motherfu*#er). Even then is still behind GB in performance and battery life.
I haven't tried custom ROMs, but i don't think they are much different than a modded stock JB. Neither have i tried CM yet, because i watch a lot of videos and use the video recorder. If they get around this issues on CM it could be a valid choice....
Movistar will give a new phone to reeplace my faulty one, and i'm not planning to flash JB..... when I came back to GB a few days ago (before taking the cellphone to movistar service center) i realized how much JB sucked (you kind of get used to it working like crap).
So i think i will be waiting some more before i make the jump to JB/CM
Anyway, that's my experience, and my opinion. Some people find JB very usuable with some tweaks.
Argentine guy here, too. So, let's say I'd like to try GB... since I flashed JB right away when I got my SGA two months ago, and a friend showed me her SGA with GB and well, apart from the ocassional interface stutter which is always going to be there in GB, it was REALLY snappy. CM10.1-like snappy, amazing. Yes, as you said JB is head and shoulders above GB feature wise, but apart from that it's not that much of a "downgrade" considering the battery life and performance you gain, I think. When the CM guys get the video recording sorted out I'll be using that, but meanwhile I agree, JB is smooth but lags a lot, it gets on my nerves most of the time! Flashing it, doing all the wipes, installing cocore, going all the way to using 4cylturbo/directinject and crossbreeder and there's still some places where it lags, and it gets irritating.
CWM backup first, then I'll flash stock JB... then proceed to flash GB as per your experience... or I might go on with JB, I don't know, lol. What I'd like to know is exactly how you did it... If I understood you correctly, you flashed the PDA in the downgrade thread without the CSC and PIT files, and left all the odin 1.85 settings as they were (I mean, if you're not flashing the PIT file you don't need to tick the repartition box, right?) or did you do something else...?
Thank you!!
How is that possible when Odin aborts the process and asks for a PIT file?
That is right, I just flashed the PDA file from the downgrade guide like any other PDA, meaning that you don't have to check the re-partition box or anything like that. After that, when the downgrade was done, i flashed the GB firmware i wanted (movistar, argentina in my case), you could use the unbranded ARO firmware.
Odin didn't ask for any PIT file... maybe you have to uncheck the re-partition box.
Just an update, I tried this again with 2 other phones and succeded. There are people posting problems with the other method, but this thread seems to be lost in the forum. I will give another heads up on the official downgrade guide, just in case.
Piachnp said:
Just an update, I tried this again with 2 other phones and succeded. There are people posting problems with the other method, but this thread seems to be lost in the forum. I will give another heads up on the official downgrade guide, just in case.
Click to expand...
Click to collapse
So, when i'm understanding your posts, it's possible to use the PDA-file of my country to downgrade JB to GB?
If so, it would be genius. I've JB on my Samsung and it's constantly freezing, hanging and restarting my device.
The cause is of course unknown, and I don't have to count on Samsung. Even when I installed another JB (also stock) it's crappy too.
Thank you in advance, i'm wondering whether this works for me.
Since no-body has started a thread for Lollipop on our beloved SM-N9005's, I thought I'd start one for us
Here's what you need in order to achieve awesomeness:
Samsung Galaxy Note 3 (SM-N9005 ONLY!)
The firmware file located here: https://mega.co.nz/#!qk12UYYB!4fg39KkeatkTtcShS4rUljWpU1rGnMC9XL3C17z8Crk
Or here: http://www.sammobile.com/firmwares/download/43185/N9005XXUGBOA5_N9005VFGGBOA2_VOD.zip/ (UK Vodafone) others can be found at http://www.sammobile.com
Odin - located here:http://www.mediafire.com/download/vwuqru9m1jp9wbw/Odin3_v3.09.zip/
The Samsung drivers installed, if not they can be found here:http://androidxda.com/download-samsung-usb-drivers
1. First you need to download the firmware package, once done, extract
2. Then you need to install the Samsung Galaxy Note 3 drivers (if you have not already done so, if you have, proceed to step 3)
3. Extract Odin.
4. Open Odin using right click, run as administrator.
5. Their is a .PIT located in the firmware folder you extracted in step 1. This is for the 32GB variant ONLY! Using this on the 16GB variant will most likely result in a brick! If you have the 16GB variant, skip to step 6. If you have the 32GB variant, flashing with the .PIT is optional. If you wish to use it, click pit in Odin and locate the extracted file from step 1, and select the .PIT.
6. Click Bootloader and select the file that starts with BL.
7. Click PDA AND select the file that starts with AP.
8. Click CSC and select the file that starts with CSC.
9. Click Modem and select the file you haven't yet selected.
10. Then you need to power off your device.
11. Once done, we need download mode, to enter this you need to hold Vol Down + Home + Power at the same time. Once done you will be prompted with a screen with a load of writing about custom roms etc, press Vol Up to continue.
If you're using the .PIT (remember 32GB variant ONLY!!) On the left hand side, make sure auto reboot is checked, repartition is checked, F. Reset Time is checked and Phone Bootloader Update is checked.
Once all these details are entered correctly and you're happy to proceed, press start.
Let it do its business, it usually takes around 8-9 mins to complete. Once done you're running pure awesomeness on your device.
Please Note: I can't stress enough that the .PIT file is for the 32GB variant ONLY!!!!! if you're running the 16GB variant, DO NOT USE THE .PIT FILE!!!!!!!!
Also, I take no responsibility for bricked or damaged devices, by participating in the above, you take all responsibility for yourself and for your device. You have been warned my friends. Happy flashing!
A video guide can be found here: https://www.youtube.com/watch?v=fe_mr9FsCgY thanks to android.zealot.fervor (Y)
No point making double post.
satslu said:
No point making double post.
Click to expand...
Click to collapse
Where's the other thread?
speedyjay said:
Where's the other thread?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2980039
satslu said:
http://forum.xda-developers.com/showthread.php?t=2980039
Click to expand...
Click to collapse
It's not as in depth as my thread
does the room working perfectly ?
will it trip knox ?
Works like a treat mate. It won't trip knox because it's official Samsung
The Batterylife is, in my opinion, quiet amazing.
Got nearly 4 hours of screen time, with highest brightness, nearly 2 hours phone callin, more then one hour of skype, more then one hour 9gag and wlan/mobile data permanantly on.
Did anybody try the towelroot method by flashing the ND3 Kernel and reflashing back this kernel ?
what about video camera and playback of vids??Mine was freezing on startup and then rebooting
There's a thread for lollipop, why double thread? Who will measure depth?we or mod?
Sent from my SM-N910C using XDA Free mobile app
jdomadia said:
There's a thread for lollipop, why double thread? Who will measure depth?we or mod?
Sent from my SM-N910C using XDA Free mobile app
Click to expand...
Click to collapse
Theirs already a Lollipop thread in the Android Development section but not in General.
Video recording freezes
illusion786 said:
Video recording freezes
Click to expand...
Click to collapse
Video recording works fine here buddy
did you do full update ?
as in with the boot loader?
My BL,CP,CSC and UMS options in Odin 3.09 are shaded out and can't be selected.
Can I just add the zipped package to AP and flash that with the PIT file?
Windows 10 preview, Note 3 N9005 3UK
Does this ROM have pt-br language? Works normally in Brazil?
Official ROM or Leaked?
I can't quite figure out one thing, this ROM is an official one or a leaked one? Cause I don't see anything in sammobile for N9005
illusion786 said:
did you do full update ?
as in with the boot loader?
Click to expand...
Click to collapse
Yes, full update
Does this ROM have pt-br language? Works normally in Brazil? Please someone can answer me?
people have a big problem. I have a 920i and install the core [kernel] [UPDATE] for S6 Edge SM-G925F v.1.7 / 3 (AOGF G928F) by Tamerlan2009
Starting well, the only problem is that I invested touch this all works the other way around. install a rom stock by Odin but still the same. someone can give me a hand to fix it, excuse my English.
pd; when istale the core, he said unmont partitions
I hope someone can guide me .. thank you very much
D!3G0 #1 said:
people have a big problem. I have a 920i and install the core [kernel] [UPDATE] for S6 Edge SM-G925F v.1.7 / 3 (AOGF G928F) by Tamerlan2009
Starting well, the only problem is that I invested touch this all works the other way around. install a rom stock by Odin but still the same. someone can give me a hand to fix it, excuse my English.
pd; when istale the core, he said unmont partitions
I hope someone can guide me .. thank you very much
Click to expand...
Click to collapse
Go to SAMMOBILE
Select GALAXY S6(G920I)
Choose the corresponding CSC of you device, for example, mine is ZTO CSC and COGA build.
If you don't know yours then download any G920I file (you may want to choose the latest available for G920I ONLY)
Go to ODIN
Load the stock firmware at AP option then flash it (must be connected in download mode)
DONE
YOU WILL GET A FACTORY RESET, YOU MAY BACKUP YOUR DATA BEFORE ANYTHING, I AM NOT RESPONSIBLE TO ANYTHING THAT MIGHT HAPPEN TO YOU DEVICE!
Sent from my SM-G920I using Tapatalk
TurokHunter47 said:
Go to SAMMOBILE
Select GALAXY S6(G920I)
Choose the corresponding CSC of you device, for example, mine is ZTO CSC and COGA build.
If you don't know yours then download any G920I file (you may want to choose the latest available for G920I ONLY)
Go to ODIN
Load the stock firmware at AP option then flash it (must be connected in download mode)
DONE
YOU WILL GET A FACTORY RESET, YOU MAY BACKUP YOUR DATA BEFORE ANYTHING, I AM NOT RESPONSIBLE TO ANYTHING THAT MIGHT HAPPEN TO YOU DEVICE!
Sent from my SM-G920I using Tapatalk
Click to expand...
Click to collapse
That was the first thing I did .. I put a good stock firmware clean and nothing
I do not know what to do
Wrong forum section.
That belongs on the Q&A section.
This may happened because you flashed a kernel for G925 not for G920 and I think you just bricked your device or not.
Sent from my SM-G920I using Tapatalk
TurokHunter47 said:
This may happened because you flashed a kernel for G925 not for G920 and I think you just bricked your device or not.
Sent from my SM-G920I using Tapatalk
Click to expand...
Click to collapse
no not bricked, the touch goes crazy
So you messed up the touch driver.
I don't about any fix for this, sorry.
Sent from my SM-G920I using Tapatalk
Have you tried installing another kernel which is for 920i?
Try this to dial
*#2663# in your phone.
For more details follow this link.
http://forum.xda-developers.com/galaxy-s6/general/inverted-touch-screen-x-axis-flashing-t3095205
Hey everyone,
Here is a guide to flash AT&T Nougat to our T-Mobile S7. For convenience I have uploaded everything needed to google drive.
So far the only thing I have found that isn't working is Wi-Fi Calling.
1) Download everything from this Google Drive folder:
https://drive.google.com/drive/folders/0B6HE3dipVfjZOVRMcWd1S3IzOVE?usp=sharing
2) Copy the "update.zip" to your SD card. If you don't have an SD Card, you may need to copy it to your phone after step (4)
3) Put your phone into Download mode
4) Flash the PK1 files in Odin (AP, CSC, BL, and CP)
5) Once your phone restarts to the setup screen (could take 10-15 minutes) restart back into Recovery mode. No need to do any setup here
6) Flash update from SD Card and select "update.zip". This step can take over 30 minutes.
7) Once you have gone through the initial setup, you need to fix the APN settings.
a) Go to Settings - Connections - Mobile Network - Access Point Names
b) Click Add
c) Fill in these APN Settings
Name: T-Mobile US LTE
APN - fast.t-mobile.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
APN type: default,mms,supl
d) Click the 3dots menu - Save
e) Click on the newly created menu
f) Now your LTE data should work
And Voila! You now have a working final version of Nougat. You can disable almost everything that AT&T puts on there.
EDIT: I've updated the Google Drive link with a compressed file containing all the needed AT&T files.
If this works for you please go to the following post and thank the OP. Without his instructions, I would have not been able to do this.
https://forum.xda-developers.com/at...to-update-galaxy-s7-edge-firmware-to-t3541296
Are there any connection drops: Bluetooth, Wi-Fi, or cellular drop? Is the signal good where it is supposed to be good?
Illyakulinych said:
Are there any connection drops: Bluetooth, Wi-Fi, or cellular drop? Is the signal good where it is supposed to be good?
Click to expand...
Click to collapse
No, I haven't had any connection drops. I only flashed it last night, I will definitely keep everyone here updated. Cell signal is just as good as the latest tmobile features.
Also, I realized I posted this in the Q&A section. Any chance an admin could move it to the Guide section
plz compress it and upload again impossible to download
popmpopm said:
plz compress it and upload again impossible to download
Click to expand...
Click to collapse
Sorry about that. Reuploading now. The same link should work and it will be ready in about 20 minutes. I'll edit this post when it is uploaded.
Is there any difference between verizon nougat and at&t nougat ?
I mean i am using verizon nougat on my s7 tmobile but I experience issues with cellular network alot.
Could someone guide me please?
Owi93 said:
Is there any difference between verizon nougat and at&t nougat ?
I mean i am using verizon nougat on my s7 tmobile but I experience issues with cellular network alot.
Could someone guide me please?
Click to expand...
Click to collapse
The main differences I found between the Version nougat I was using and this version is that the latest Verizon version I could find was still just a beta. This is what seems to be a fully finished version of nougat. As I said, I have only had this for 1 day on my phone, but so far I have had absolutely no issues. The Verizon version gave me battery life issues, it caused my phone to overheat quite often, this version has none of those problems.
r3xx3r said:
The main differences I found between the Version nougat I was using and this version is that the latest Verizon version I could find was still just a beta. This is what seems to be a fully finished version of nougat. As I said, I have only had this for 1 day on my phone, but so far I have had absolutely no issues. The Verizon version gave me battery life issues, it caused my phone to overheat quite often, this version has none of those problems.
Click to expand...
Click to collapse
I see.
So No mobile data issues you mean ?
Owi93 said:
I see.
So No mobile data issues you mean ?
Click to expand...
Click to collapse
exactly. I have not had any mobile data issues yet. Battery life so far is amazing. Performance is awesome.
r3xx3r said:
exactly. I have not had any mobile data issues yet. Battery life so far is amazing. Performance is awesome.
Click to expand...
Click to collapse
Thanks for the help man.
I will try this today.
Will I have to go back to the tmobile stock firmware first ? To flash the at&t firmware?
Owi93 said:
Thanks for the help man.
I will try this today.
Will I have to go back to the tmobile stock firmware first ? To flash the at&t firmware?
Click to expand...
Click to collapse
I was on stock t-mobile firmware, but I don't see why you would need to be too flash this.
thanks for y hard work
Are the French language in this rom
r3xx3r said:
I was on sick tmobile firmware, but I don't see why you would need to be too flash this.
Click to expand...
Click to collapse
I don't know bro.
I am new to this game.
I just don't want something bad to happen
popmpopm said:
thanks for y hard work
Are the French language in this rom
Click to expand...
Click to collapse
Yes they are
Owi93 said:
I don't know bro.
I am new to this game.
I just don't want something bad to happen
Click to expand...
Click to collapse
Than flash back to stock firmware.
r3xx3r said:
I was on sick tmobile firmware, but I don't see why you would need to be too flash this.
Click to expand...
Click to collapse
if you know 930U MM rom are great too ( yes 930t is really very bad rom ) am uncertain to change it
can someone confirm that VoLTE works?
Just flashed this. So far so good. Will reply later tomorrow to let people know if I find anything not working
Quick question the, the files I downloaded is a pk1 is that that actual Update file? Or is that the odin files to flash threw odin? Then the update file should be there to do a recovery flash Update?
I'm already on pk1 but the mobile and it didn't flash threw recovery. I thought I'd just have to flash it over this but not being on att started to figure that I need to be on att pk1.
Thanks in advance
dandel0074 said:
Quick question the, the files I downloaded is a pk1 is that that actual Update file? Or is that the odin files to flash threw odin? Then the update file should be there to do a recovery flash Update?
I'm already on pk1 but the mobile and it didn't flash threw recovery. I thought I'd just have to flash it over this but not being on att started to figure that I need to be on att pk1.
Thanks in advance
Click to expand...
Click to collapse
Okay, so there are 5 files in the archive. 4 of them end in .tar.md5 and those are the AT&T PK1. You need to flash those files through Odin, than flash the update.zip through the phones recovery mode. You need to be on the AT&T PK1 before you can flash the update.zip through the recovery. Flashing the update.zip while on the T-Mobile PK1 will fail.
Hi guys
I think that i'm doing things right...
1) I have Samsung USB drivers installed
2) I'm using Odin3.11
3) I'm using the correct params for 7.0 ( BL,AP,CP, Home_CSC in Odin )
3) Odin Options ( F.ResetTime, Auto-reboot,Repartion) all unticked
4) On the S7 USB debugging is On
I put the tel in DL mode and here is the list of what Odin spits at me...once launched
Log Screen
-Odin Checking v 3.1101
-File analysis
-Skip file for home binary
-param.bin
-modem_debug.bin
-Home binary Download
-Setup Connection
-Initialisation
-Set PIT for mappjng
-Firmware update Start
-Single Download
-sboot.bin
-Nand Write Start
-cm.bin
FAIL!
Am I missing someting or did something wrong ?
Thks in advance !!
Use ODIN 3.12.3 or newer
And which model S7 is it?
*Detection* said:
Use ODIN 3.12.3 or newer
And which model S7 is it?
Click to expand...
Click to collapse
S7 Flat 930F with Exynos
zorglub! said:
S7 Flat 930F with Exynos
Click to expand...
Click to collapse
Try the newer version of ODIN
Code:
https://mega.nz/#!jUgRiTSa!fnAVwr7yFi4dlPk4V0oQ5DuoFe3iiG0jH-ws91IHOPc
Leave ODIN as it is, don't change any settings, just add the 4 sections of firmware and hit Start
zorglub! said:
S7 Flat 930F with Exynos
Click to expand...
Click to collapse
I've used Odin 3.12.3...same stuff FAIL after step cm.bin
*Detection* said:
Try the newer version of ODIN
Code:
https://mega.nz/#!jUgRiTSa!fnAVwr7yFi4dlPk4V0oQ5DuoFe3iiG0jH-ws91IHOPc
Leave ODIN as it is, don't change any settings, just add the 4 sections of firmware and hit Start
Click to expand...
Click to collapse
Do you mean AP,BL, CP and Home_CSC ?
It is what I did ( with Odin 3.11 and 3.12.3) but same message FAIL after cm.bin step
zorglub! said:
Do you mean AP,BL, CP and Home_CSC ?
It is what I did ( with Odin 3.11 and 3.12.3) but same message FAIL after cm.bin step
Click to expand...
Click to collapse
and same tuff with Odin 3.12.7
Edit: Derp, wrong forum VZW won't help you The instructions in mine only say to use ap, cp, and csc but archive does include all. Wondering if you are just flashing more than needed?
I also experienced this yesterday. Let me share to you what I did. It might help.
1. Download the stock firmware.
2. Go to download mode.
3. Flash in odin the AP from the stock firmware and csc (not home). For BL and CP, I downloaded the latest files from this link: https://androidfilehost.com/?w=files&flid=95565 (i got it from here: https://forum.xda-developers.com/galaxy-s7/how-to/guide-onelatest-stock-fw-csc-root-t3702963)
I hope it works.
djh816 said:
Edit: Derp, wrong forum VZW won't help you The instructions in mine only say to use ap, cp, and csc but archive does include all. Wondering if you are just flashing more than needed?
Click to expand...
Click to collapse
VZW ???
zorglub! said:
VZW ???
Click to expand...
Click to collapse
Hahah yessir... Sorry, I have both S7 forums favorited. Context wise I thought I was replying to a Verizon thread.. My mistake
jaypeeb0917 said:
I also experienced this yesterday. Let me share to you what I did. It might help.
1. Download the stock firmware.
2. Go to download mode.
3. Flash in odin the AP from the stock firmware and csc (not home). For BL and CP, I downloaded the latest files from this link: https://androidfilehost.com/?w=files&flid=95565 (i got it from here: https://forum.xda-developers.com/galaxy-s7/how-to/guide-onelatest-stock-fw-csc-root-t3702963)
I hope it works.
Click to expand...
Click to collapse
thks Mate, I'll do it tomorrow...( fairly late here...) and let u know
Thks anyway
djh816 said:
Hahah yessir... Sorry, I have both S7 forums favorited. Context wise I thought I was replying to a Verizon thread.. My mistake
Click to expand...
Click to collapse
No problem...
But I had absolutely no idea what u were talking about....clear now !!!
jaypeeb0917 said:
I also experienced this yesterday. Let me share to you what I did. It might help.
1. Download the stock firmware.
2. Go to download mode.
3. Flash in odin the AP from the stock firmware and csc (not home). For BL and CP, I downloaded the latest files from this link: https://androidfilehost.com/?w=files&flid=95565 (i got it from here: https://forum.xda-developers.com/galaxy-s7/how-to/guide-onelatest-stock-fw-csc-root-t3702963)
I hope it works.
Click to expand...
Click to collapse
Not had a chance to work on subject Sunday...
WIll give a try, following yr suggestions, probably tomorrow...and we'll see
thks again
jaypeeb0917 said:
I also experienced this yesterday. Let me share to you what I did. It might help.
1. Download the stock firmware.
2. Go to download mode.
3. Flash in odin the AP from the stock firmware and csc (not home). For BL and CP, I downloaded the latest files from this link: https://androidfilehost.com/?w=files&flid=95565 (i got it from here: https://forum.xda-developers.com/galaxy-s7/how-to/guide-onelatest-stock-fw-csc-root-t3702963)
I hope it works.
Click to expand...
Click to collapse
Thks for having pointed meto the right direction...and make ùe discover my mistake...
I was using the wrong base or trying to estore to the wrong base...
Now it is fixed and i'm back to Stock
Thks again
zorglub! said:
Thks for having pointed meto the right direction...and make ùe discover my mistake...
I was using the wrong base or trying to estore to the wrong base...
Now it is fixed and i'm back to Stock
Thks again
Click to expand...
Click to collapse
I am glad it worked. I hope my suggestion worked too. XD