Update to 4.2.2 - Red exclamation mark - HTC One SV

So I have met another problem with the ROM update. Finally after changing the CID to HTC__032, then flashing the JB odexed for k2_ul and flashing the default recovery for it, I received the update notification, it has downloaded the update, then I have started the update and it was in recovery the red exclamation mark appeared. After pressing VOL+, VOL- and power at once it showed me:
Code:
-- Install /internal_sdcard/Download ...
Finding update package...
Opening update package...
Installing update...
Verifying current system...
assert failed: apply_patch_check("/system/customize/CID/HTC__001.xml", "3d27b0b3810f9dad411a85eb9e9bb8875fb9a680", "42c871f9d9c9820fb3047c4d162cde7349f699b3")
Installation aborted.
Anything I can do?

Please use the hboot downgrade - ICS RUU way.

old.splatterhand said:
Please use the hboot downgrade - ICS RUU way.
Click to expand...
Click to collapse
I propably might not be able to do. As the Windows 8.1 shows me weird error on driver and I cannot update it with a proper one (all fastboot and adb commands I was doing via my netbook with Linux system). May the RUU work under Linux Wine?

Bazdir said:
I propably might not be able to do. As the Windows 8.1 shows me weird error on driver and I cannot update it with a proper one (all fastboot and adb commands I was doing via my netbook with Linux system). May the RUU work under Linux Wine?
Click to expand...
Click to collapse
I don't know about linux. But that way is the easiest (only?) we have (and all others failed). So i suggest you should maybe use another pc or something like that.

old.splatterhand said:
I don't know about linux. But that way is the easiest (only?) we have (and all others failed). So i suggest you should maybe use another pc or something like that.
Click to expand...
Click to collapse
Luckily I have my mother's laptop with old but good Windows 7 on it. Connected successfully into fastboot mode and fastboot.exe recognize my phone. Hope the RUU will run without any problems (I had enough of them, pheww...)

Hi
I've the same problem
downgrade was success to ics hboot and run 1.17.401 on my device
search for update , but recive JB 4.1.2 <2.14.401.6> for me
i download 4.2.2 on xda , try to flash in stock recovery on jb and ics , but not success
try to flash jb 4.2.2 stock recovery , but when i go to it, reboot automaticly to android !
tell me the best way to update my phone to 4.2.2
Thnx

mehdiyahyavi said:
Hi
I've the same problem
downgrade was success to ics hboot and run 1.17.401 on my device
search for update , but recive JB 4.1.2 <2.14.401.6> for me
i download 4.2.2 on xda , try to flash in stock recovery on jb and ics , but not success
try to flash jb 4.2.2 stock recovery , but when i go to it, reboot automaticly to android !
tell me the best way to update my phone to 4.2.2
Thnx
Click to expand...
Click to collapse
Do the JB 4.1.2 update first, then search again for the 4.2.2 update.

old.splatterhand said:
Do the JB 4.1.2 update first, then search again for the 4.2.2 update.
Click to expand...
Click to collapse
thanks
if Download 4.2.2 ota from this http://forum.xda-developers.com/showthread.php?t=2513071 can i flash on 4.1.2(if possible tell me how) or shuld download ota from my device ?
sorry for my badenglish

mehdiyahyavi said:
thanks
if Download 4.2.2 ota from this http://forum.xda-developers.com/showthread.php?t=2513071 can i flash on 4.1.2(if possible tell me how) or shuld download ota from my device ?
sorry for my badenglish
Click to expand...
Click to collapse
If you get notification, download from device.

Related

[Q] Sensation xe update clarification

Hello ,
I have read many posts , some saying you can get the update if you are rooted/s-off and some say you cant .
I have sensationXE 2.3.4 1.73.707.4 10.58.9035. kernel : 2.6.35.13
I have Done S-off and root , but I did not flash the devise or install any rom still on stock
.
Will It be able to run the ota update when it pops in software update ?
What will have to do to install the update by the OTA file ( any special steps for this case ) ?
I have searched in the forum for this exact situation , I did not find . Please clarify this for me and for others with similar cases
Thank you
nefedroid said:
Hello ,
I have read many posts , some saying you can get the update if you are rooted/s-off and some say you cant .
I have sensationXE 2.3.4 1.73.707.4 10.58.9035. kernel : 2.6.35.13
I have Done S-off and root , but I did not flash the devise or install any rom still on stock
.
Will It be able to run the ota update when it pops in software update ?
What will have to do to install the update by the OTA file ( any special steps for this case ) ?
I have searched in the forum for this exact situation , I did not find . Please clarify this for me and for others with similar cases
Thank you
Click to expand...
Click to collapse
u need stock recovery to install ota
If u r still stock 100% but rather s-off, u should be fine. Whenever u receive the update just take the update like it says too, no special instructions. When people say u lose root that means, no superuser, busybox, and so on. U should still keep s-off
You won't get it yet as the initial release is for EU unbranded handsets. Other regions will roll out soon I'd imagine, followed by branded handsets
can i put file on sd ( ota file ) and update from cm recovery .
" Update usign zip "?
nefedroid said:
can i put file on sd ( ota file ) and update from cm recovery .
" Update usign zip "?
Click to expand...
Click to collapse
No, you need stock recovery
Sent from my Galaxy Nexus using xda premium
or download the stock file and install it from sd card
any guide on how to go back to stock recovery?
Ok you said you were stock and all you have done is S-off your Sensation XE and root it. If this is all you have done you still have the stock recovery and you can just download the OTA update file and place it on the root of your SD card. Then boot your Sensation into the boot loader by either taking your battery out or go into settings/power and uncheck the box for fastboot. You have to do either one of these to make sure your device is completely powered down. Next you need to power on your Sensation while holding the volume down button dow. Then use the volume rocker to scroll to recovery and press the power button. Then just follow the on screen instructions to flash the OTA file.if the file does not appear you either do not have the file on the root of your SD card or the file is not properly named. Post back here with your results.
thank you for this info dear sir.
Do u think i should do it this way or
wait for my update notification to pop ( will i be able to install it if am rooted) ?
Thanks again
I pressed my volume down+ turn off -> recovery - > it is titled CLOCKWORKMOD Recovery v5.0.0.8 ??
nefedroid said:
thank you for this info dear sir.
do u think i should do it this way or wait for my update notification to pop ?
or is it the same ?
Thanks again
Click to expand...
Click to collapse
You are welcome, as far as if you should wait or not that is totally up to you. The only draw back to not waiting really is that you will not have certain apps that your carrier includes in the ROM for their Sensation. Like for example if I flashed it now and did not wait for the OTA update message to pop up on my phone I will not have any of the T-Mobile apps on my Sensation, the only one I care about anyway is the WiFi hotspot app. But I think you see what I am talking about. Plus if you do not wait you will have to S-off your Sensation and write Super CID to your Sensation to flash the available ICS and Sense 3.6 OTA update file. The drawback to waiting is just waiting lol. Well that and the fact that if there is ever another OTA update for your Sensation you will have to flash the correct stock ICS update for your Sensation to get it via OTA and not by downloading it, placing it on the root of your SD card, and then booting into the stock recovery to flash of.
nefedroid said:
thank you for this info dear sir.
Do u think i should do it this way or
wait for my update notification to pop ( will i be able to install it if am rooted) ?
Thanks again
I pressed my volume down+ turn off -> recovery - > it is titled CLOCKWORKMOD Recovery v5.0.0.8 ??
Click to expand...
Click to collapse
Sorry I just now saw that you had edited your post. If it says CLOCKWORKMOD Recovery v5.0.0.8 then you do not have the stock recovery you have Clockworkmod Recovery wich is a custom recovery. So you will have to flash the stock recovery back to your Sensation before you can flash the ICS and Sense 3.6 OTA update, if it was not so late I would see if I could not put together a Clockworkmod and other custom recovery flashable .zip file so everyone would not have to revert back to stock recovery to flash the OTA update. Anyway to revert back to stock recovery you will need to flash a stock ROM back to your Sensation. And seeing as you are Super CID you can flash any stock ROM you want. Just go to here to download a official stock ROM. All the ROMs in the link are RUU.exe files so you will have to connect your Sensation to your computer via your USB cord and then run the RUU.exe. Once you have flashed the stock ROM you just need to follow my directions from my other post and you should be good to go.
nefedroid said:
thank you for this info dear sir.
Do u think i should do it this way or
wait for my update notification to pop ( will i be able to install it if am rooted) ?
Thanks again
I pressed my volume down+ turn off -> recovery - > it is titled CLOCKWORKMOD Recovery v5.0.0.8 ??
Click to expand...
Click to collapse
clockworkmod is not stock recovery... (facepalm)
Sent from my BlackBerry Runtime for Android Apps using Tapatalk
so, any clear guide for dumb people like me, on how to flash to ICS for sensation XE when allready rooted with clockwork recovery please?

[Q] How do i get back to Stock HTC Jellybean 3.16 ?

as there is no RUU.exe for 3.16 JB how do i get back to official stock rom and recovery ?
Thanks
BackDaws said:
as there is no RUU.exe for 3.16 JB how do i get back to official stock rom and recovery ?
Thanks
Click to expand...
Click to collapse
this was already asked somewhere ..
download zenRom
this is a close to stock as possible Rom (its based on the android 4.0.4 with sense 4.1)
so here we go:
1. install the zenRom the usual way (wipe everything twice except the sd card before flashing, dont forget flashing the boot.img)
2. let the zenRom boot fully
3. shut your phone off
4. flash the stock recovery via fastboot [you can get it here, its the second (!) link] you need the stock recovery to install the official OTA
5. boot your phone and let your device search for updates
6. you will get the JB OTA [if not, make a factory reset and try again]
7. download and install the OTA the usual way
8. do a factory reset
9. tada .. you are on the latest official stock JellyBean without relocking your bootloader
JB RUU IS OUT! get it here:
http://shipped-roms.com/download.php?model=Ville&file=RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
original thread:
http://forum.xda-developers.com/showthread.php?t=2159416
NQNH said:
this was already asked somewhere ..
download zenRom
this is a close to stock as possible Rom (its based on the android 4.0.4 with sense 4.1)
so here we go:
1. install the zenRom the usual way (wipe everything twice except the sd card before flashing, dont forget flashing the boot.img)
2. let the zenRom boot fully
3. shut your phone off
4. flash the stock recovery via fastboot [you can get it here, its the second (!) link] you need the stock recovery to install the official OTA
5. boot your phone and let your device search for updates
6. you will get the JB OTA [if not, make a factory reset and try again]
7. download and install the OTA the usual way
8. do a factory reset
9. tada .. you are on the latest official stock JellyBean without relocking your bootloader
Click to expand...
Click to collapse
Thanks mate this worked perfectly
BackDaws said:
Thanks mate this worked perfectly
Click to expand...
Click to collapse
nice to hear
hello, can we relock the bootloader after that ?
AW: [Q] How do i get back to Stock HTC Jellybean 3.16 ?
I'm not sure.
One time I relocked my bootloader I get only bootloops :/
Sent from my HTC One S using xda app-developers app
Oh yeah, it works perfectly for me !
Thanks you guys !
NQNH said:
this was already asked somewhere ..
download zenRom
this is a close to stock as possible Rom (its based on the android 4.0.4 with sense 4.1)
so here we go:
1. install the zenRom the usual way (wipe everything twice except the sd card before flashing, dont forget flashing the boot.img)
2. let the zenRom boot fully
3. shut your phone off
4. flash the stock recovery via fastboot [you can get it here, its the second (!) link] you need the stock recovery to install the official OTA
5. boot your phone and let your device search for updates
6. you will get the JB OTA [if not, make a factory reset and try again]
7. download and install the OTA the usual way
8. do a factory reset
9. tada .. you are on the latest official stock JellyBean without relocking your bootloader
Click to expand...
Click to collapse
I followed your steps but there still doesnt show the ota update for jellybean i even did a factory reset from the sense settings menu and the ota still doesn't show.
Sent from my One S using xda premium
AW: [Q] How do i get back to Stock HTC Jellybean 3.16 ?
Which CID do you have?
Sent from my HTC One S using xda app-developers app
eddiemurphy said:
I followed your steps but there still doesnt show the ota update for jellybean i even did a factory reset from the sense settings menu and the ota still doesn't show.
Sent from my One S using xda premium
Click to expand...
Click to collapse
If it suits your needs, pm me and I'll send you a link to my Google Drive. There you'll find at least two nandroid backups, stock 2.31 EU and stock 3.16 EU. 2.31 will update to 3.16, if you want your bootloader version being changed to 2.15. With restoring 3.16 you'll keep your current bootloader.
For the OTA Update you need a valid CID as NQNH correctly mentioned!
rootrider said:
If it suits your needs, pm me and I'll send you a link to my Google Drive. There you'll find at least two nandroid backups, stock 2.31 EU and stock 3.16 EU. 2.31 will update to 3.16, if you want your bootloader version being changed to 2.15. With restoring 3.16 you'll keep your current bootloader.
For the OTA Update you need a valid CID as NQNH correctly mentioned!
Click to expand...
Click to collapse
I have a fido Canada one s so will it be a problem if i restore your nandroid?
Sent from my One S using xda premium
JB RUU IS OUT NOW
http://shipped-roms.com/download.php?model=Ville&file=RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
original thread:
http://forum.xda-developers.com/showthread.php?t=2159416
NQNH said:
JB RUU IS OUT NOW
http://shipped-roms.com/download.php?model=Ville&file=RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
original thread:
http://forum.xda-developers.com/showthread.php?t=2159416
Click to expand...
Click to collapse
Thank you mate
Disregard this post, I was able to find my answer from an earlier post. Thank you.

[ROM] Official 3.19.401.101 OTA | JB 4.1.1 | Sense 4+ | [Sticky thread request] |

This is a thread consisting of official updates from HTC.
Update your HTC One S (VilleC2) to latest official ROM from HTC! :victory:
WARNING
I am not responsible for bricked devices
You have to have JB hboot to run JB ROMs (you can download firmware.zip from THIS post)
Click to expand...
Click to collapse
Features:
Latest official 3.19.401.101
Android 4.1.1
Sense 4+
Odex
Not modded, fully stock
Click to expand...
Click to collapse
DOWNLOAD 3.19.401.101
Installation:
Download, place on SD
Install via recovery (TWRP recommended)
Wipe cache
Flash JB kernel or stock one from zip --> /firmware.zip/boot.img
This OTA should work flashed directly on stock ICS.
BTW, I am going to make a custom ROM for VilleC2 based on that official one.
Let's make the users forget that they don't have S4 processor and plenty of custom ROMs to choose from
maxio1998 said:
BTW, I am going to make a custom ROM for VilleC2 based on that official one.
Let's make the users forget that they don't have S4 processor and plenty of custom ROMs to choose from
Click to expand...
Click to collapse
waiting for it!
Omg thanks... P.s cn we use this on stock rom
Sent from my HTC One S using xda app-developers app
Work for Cid :BSTAR301
Doesn't flash in TWRP because of simple reason:
CID check is not removed from updater script, that's first thing to do if you want to make OTA flashable.
how remove CID check
Any hope for Latin America CID: BSTAR301? HBOOT: 2.09
Does hboot 2.11 work?
Send from my Ville C2
rasputyn said:
Doesn't flash in TWRP because of simple reason:
CID check is not removed from updater script, that's first thing to do if you want to make OTA flashable.
Click to expand...
Click to collapse
Ok, I am gonna remove it, thanks
EDIT
Uploading new version
Anyone Can Post The HTC CID_044 Update of 3.19 ? i'm using the global/asia model so if anyone has it please share really appreciate it
kayserxx said:
Work for Cid :BSTAR301
Click to expand...
Click to collapse
No, it is not working in BSTAR301 [S3]
hellodzulz said:
Anyone Can Post The HTC CID_044 Update of 3.19 ? i'm using the global/asia model so if anyone has it please share really appreciate it
Click to expand...
Click to collapse
same here if u gt any info plz do tell me tooo
Hi all.
My daughter have a HTC One S S3 with ICS. We leave in Switzerland and no OTA appears in the phone until now.
The phone is damaged in the SIM card slot, so my daughter use it for games, music, chat, etc...
It's possible that I didin't receive OTA because no SIM?
Can I update manualy?
The phone is not rooted: she don't want to loose all making dev think.
Thanks for help.
When I try to flash this through TWRP, I get to "creating fota tool" (something like that) and then TWRP restarts. When I try to reboot my phone, I'm just greeted with the boot animation and then a black, unresponsive screen.
Additional info:
I downloaded the OTA update through the update software menu on my phone.
I've removed the CID check from the updater-script myself (pretty sure I edited, zipped and resigned correctly).
If I try to install the update through the update manager on my phone, it boots into TWRP and I get an error: "Can't mound INTERNALSDCARD:<OTA_Updateblahblahblah.zip>"
Any ideas?
ibupropane said:
When I try to flash this through TWRP, I get to "creating fota tool" (something like that) and then TWRP restarts. When I try to reboot my phone, I'm just greeted with the boot animation and then a black, unresponsive screen.
Additional info:
I downloaded the OTA update through the update software menu on my phone.
I've removed the CID check from the updater-script myself (pretty sure I edited, zipped and resigned correctly).
If I try to install the update through the update manager on my phone, it boots into TWRP and I get an error: "Can't mound INTERNALSDCARD:<OTA_Updateblahblahblah.zip>"
Any ideas?
Click to expand...
Click to collapse
if you have update from software update menu,
just make a full twrp backup, then install stock recovery, relock bootloader, boot phone into system, search for updates, ones it is downloaded, press installa nd it will be installed automatically.
Once its installed you can again unlock bootloader and install twrp for installing custom roms.
:/
maxio1998 said:
Ok, I am gonna remove it, thanks
EDIT
Uploading new version
Click to expand...
Click to collapse
Where is the new update without the cid check :/ its giving error..
link
http://www.androidfilehost.com/?fid=22909751817929881
Credits by mtwardowski
Does this updated version has sound bugs fixed?
seagerfreak said:
Does this updated version has sound bugs fixed?
Click to expand...
Click to collapse
yup, it fixes

Softbrick after OTA Update

Hi all,
after the latest OTA Update my HTC One mini is soft-bricked.
Is there any way yet o fix it again?
When i try to push the JMZ.img i get following error: "Protocol failure" and my device trys to reboot --> Bootloop
Maybe i have a chance with the RUU for HTC One mini but i can´t find it...
Please some hins what to do.
Thanx at all
RedBull42 said:
Hi all,
after the latest OTA Update my HTC One mini is soft-bricked.
Is there any way yet o fix it again?
When i try to push the JMZ.img i get following error: "Protocol failure" and my device trys to reboot --> Bootloop
Maybe i have a chance with the RUU for HTC One mini but i can´t find it...
Please some hins what to do.
Thanx at all
Click to expand...
Click to collapse
I don't know what you mean by pushing jmz.img
jmz said:
I don't know what you mean by pushing jmz.img
Click to expand...
Click to collapse
I mean i used your boot.image. I only had the possibility to copy it to the device via "adb push" commands.
RedBull42 said:
I mean i used your boot.image. I only had the possibility to copy it to the device via "adb push" commands.
Click to expand...
Click to collapse
If you have custom recovery installed then flash any of the stock roms. If you don't have recovery installed then install it using fastboot flash recovery recovery.img
Sent from my HTC One using XDA Premium 4 mobile app
THX, your hint worked. But i have still one problem. Shutting down the phone (Power off) and start it again works.
But when i do a simple restart, it still goes into bootloop. The only thing to get rid of it is doing a factory reset.
I think i have to wait till there is an official ruu available.
I have the same issue. Still no RUU anywhere I'm afraid? Googled around without luck so far. :crying:
Hi! I've tried to flash Jmz_M4_StockRooted_KK_Odex_WWE_3.10.631.5.zip but I soft bricked my device.
Could you please give me a clear tutorial ?
kitkat 442 - Sense 6
S-on
2.22
Htcdev bootloader unlocked and rooted
Thanks!
i restore with android 4.4.3 and after update via ota.
But after update the system didn't start

Issues updating OTA - Rooted + TWRP

Hi Everyone
Can anyone please stop my suffering? I tried everything and I am lost...
My phone kept asking me to update to KAS254 which I finally managed to do by flashing stock recovery...but now it is giving me another OTA, some weird alphanumeric combination, around 60MB.
Thing is I cannot update it and the update keeps popping up and I am going crazy already.
TWRP returns this log:
Code:
...
....
Source: oneplus/bacon/A0001: 6.0.1/MHC19Q/ZNH2KAS254 : user/release-keys
Target: oneplus/bacon/A0001: 6.0.1/MHC19Q/ZNH2KAS2X1 : user/release-keys
Verifying current system...
Package expects build fingerprint of oneplus/bacon/A0001/6.0.1/MHC19Q/ZNHKAS254 : user/release-keys or oneplus/bacon/A0001: 6.0.1/MHC19Q/ZNH2KAS2X1 : user/release-keys;
this device has oneplus/bacon/A0001: 5.1.1/LMY48B/YOG4PAS1NO: user/release-keys
Updater process ended with ERROR: 7
Error installing zip file '@/cache/recovery/block.map
...
...
So appearently, I still have some Android L leftovers, but I don't know what that is.
Could anyone please help? I am going nuts!!
Thanks XDA!!!
Sopis said:
Hi Everyone
Can anyone please stop my suffering? I tried everything and I am lost...
My phone kept asking me to update to KAS254 which I finally managed to do by flashing stock recovery...but now it is giving me another OTA, some weird alphanumeric combination, around 60MB.
Thing is I cannot update it and the update keeps popping up and I am going crazy already.
TWRP returns this log:
So appearently, I still have some Android L leftovers, but I don't know what that is.
Could anyone please help? I am going nuts!!
Thanks XDA!!!
Click to expand...
Click to collapse
You can not do OTA with a customer recovery like TWRP. If you want the latest stock firmware you will need to download the latest from https://cyngn.com/support and flash all the files via fastboot then reinstall TWRP and SuperSU for root.
Durso81 said:
You can not do OTA with a customer recovery like TWRP. If you want the latest stock firmware you will need to download the latest from https://cyngn.com/support and flash all the files via fastboot then reinstall TWRP and SuperSU for root.
Click to expand...
Click to collapse
hi, thanks for your reply..I did that but it did not work
Sopis said:
hi, thanks for your reply..I did that but it did not work
Click to expand...
Click to collapse
What do you mean did not work? What happen when you flashed all the stock files via fastboot?
are you saying that I should apply the downloaded file via fastboot?
what I did is downloaded the recovery and updated to KAS54, then another update popped up and again I cannot update...no I get the same error, but this time it says I have KAS254 and the package expects something newer..
Sopis said:
are you saying that I should apply the downloaded file via fastboot?
what I did is downloaded the recovery and updated to KAS54, then another update popped up and again I cannot update...no I get the same error, but this time it says I have KAS254 and the package expects something newer..
Click to expand...
Click to collapse
Are you running stock recovery or twrp? Cause your title says twrp.
hey, I got it finally..thanks for the effort...thread can be deleted

Categories

Resources