Database Info

[Solved] wont boot after chainfire3d in JB. Fastboot- showing error

I tried installing chainfire3d driver in jellybean( i didnt know then that it is not for JB). Now my nexus wont boot into os. it just stays at the unlocked bootloader logo.
1. I can get into recovery mode
2. I have wiped out the cache and factory reset
3. I dont have a update file in my phone.since nexus dont have an external sd card i cant put any file in it directly.
4. I have tried fastboot -it shows my serial ID and i am able to reboot my phone using it but whenever i try to flash recovery.img or update update.zip it shows "cannot load recovery.img" or "cannot update update.zip"
5. I have tried ADB - on using adb shell it shows "error:device not found"
6. on using Odin (not sure whether it is compatible with Nexus s) it detects my phone. when i tried to flash the stock fireware it fails and my device shows "verify image (radio) fail"
Plz help.Is my phone bricked???????

Ok I don't want to be insulting, but you really REALLY need to read on the whole process of Nexus S rooting and using it.
You don't have to use ODIN at all for something so simple. You simply need to reflash a ROM/your ROM.
Mount your SD from within Clockworkmod recovery and transfer a ROM. Then flash it. Done.

What polo says go to recovery- mount and formay- all the way down "mount sd card". Now your phone will be like a usb drive
Sent from my Nexus S

polobunny said:
Ok I don't want to be insulting, but you really REALLY need to read on the whole process of Nexus S rooting and using it.
You don't have to use ODIN at all for something so simple. You simply need to reflash a ROM/your ROM.
Mount your SD from within Clockworkmod recovery and transfer a ROM. Then flash it. Done.
Click to expand...
Click to collapse
thank u for the suggestion. I just have the stock recovery right now. I tried installing clockwork recovery through fastboot but as i mentioned in my first post i get "error:cannot load recovery.img" .Is there any other way of installing a clockwork recovery?

kwibis said:
What polo says go to recovery- mount and formay- all the way down "mount sd card". Now your phone will be like a usb drive
Sent from my Nexus S
Click to expand...
Click to collapse
thank u for the suggestion. I just have the stock recovery right now. I tried installing clockwork recovery through fastboot but as i mentioned in my first post i get "error:cannot load recovery.img" .Is there any other way of installing a clockwork recovery?

amvignesh said:
thank u for the suggestion. I just have the stock recovery right now. I tried installing clockwork recovery through fastboot but as i mentioned in my first post i get "error:cannot load recovery.img" .Is there any other way of installing a clockwork recovery?
Click to expand...
Click to collapse
is your boot loader unlocked??? (command: fastboot oem unlock)
then in the folder that is your fasboot exe, there is the recovery too?
http://nexusshacks.com/nexus-s-hacks/how-to-root-nexus-s-or-nexus-s-4g-new/

Cascabreu said:
is your boot loader unlocked??? (command: fastboot oem unlock)
then in the folder that is your fasboot exe, there is the recovery too?
Click to expand...
Click to collapse
yes it is unlocked(using the command in fastboot also shows already unlocked) and yes the recovery image is in the same folder as that of fastboot.

amvignesh said:
yes it is unlocked(using the command in fastboot also shows already unlocked) and yes the recovery image is in the same folder as that of fastboot.
Click to expand...
Click to collapse
Instead of writting fastboo flash recovery (file name)
Do this fastboot flash recovery (drag and drop file)

Cascabreu said:
Instead of writting fastboo flash recovery (file name)
Do this fastboot flash recovery (drag and drop file)
Click to expand...
Click to collapse
Thanks a lot Cascabreu.it worked . i never knew one could drag and drop files in command prompt(wonder y it didnt work otherwise, I had specified the path correctly).Thanks again..will change the thread topic accordingly....

Yes!!!!! Finally i helped someone!!!!! Hit the thanks button please.
sent from my Nyan NeXus S

I just lolled xD
Sent from my Nexus S

kwibis said:
I just lolled xD
Sent from my Nexus S
Click to expand...
Click to collapse
helppp..im also facing the same prob...i dun know how to run adb shell and those stufff after that...:crying:

C4SCA said:
Yes!!!!! Finally i helped someone!!!!! Hit the thanks button please.
sent from my Nyan NeXus S
Click to expand...
Click to collapse
Good job.. I wouldn't have thought of that...
Sent from my Nexus S using XDA Premium 4 mobile app

C4SCA said:
Yes!!!!! Finally i helped someone!!!!! Hit the thanks button please.
sent from my Nyan NeXus S
Click to expand...
Click to collapse
hi there i also need help with almost the same problem, im using alcatel one touch pop c1, i have rooted it a while ago and the decide to install chainfire 3d i didnt know it doesnt work on jelly bean and now my phone cant boot, i tried doing factory reset but nothing happens it just shows the logo and plays that start up sound but can go past that, i have no back up or anything, and please try to explain in a best possible way im not so good when it comes to computers thanks in advance

tlangey said:
hi there i also need help with almost the same problem, im using alcatel one touch pop c1, i have rooted it a while ago and the decide to install chainfire 3d i didnt know it doesnt work on jelly bean and now my phone cant boot, i tried doing factory reset but nothing happens it just shows the logo and plays that start up sound but can go past that, i have no back up or anything, and please try to explain in a best possible way im not so good when it comes to computers thanks in advance
Click to expand...
Click to collapse
either u can find onlien a way to flash back to stock.
or ur best bet is to go to the store and say u got an update but it failed and that now its not turning on. Warranty will cover that

ATT One X TWRP question

Not completely sure how to explain it.
1. Unlocked Bootloader
2. Flashed or booted TWRP
3. Confused as can be.
At this time I had no clue that there was a simpler system by hasoon.
I just want to get back to stock or whatever so I can just root my phone. I do not want to install custom ROMs, just root.
Can someone link me to a guide to get off TWRP or something?

you still need to do everything you've done. if you don't want to flash a custom rom and just have root then flash this in twrp and then wipe cache and dalvik. UPDATE-SuperSU-v1.25.zip
TWRP is just the recovery and you sorta need it. you don't have to flash a custom rom if you dont want to.

DvineLord said:
just have root then flash this in twrp and then wipe cache and dalvikne.
Click to expand...
Click to collapse
Can you tell me how to get the SU to my phone to flash it?

You shouldn't be scared of custom roms...you're scared because you dont know what's going on...but for just having root download what he linked you to your phone.. boot into twrp click into twrp and press install and find the zip and click on it

swerg said:
Can you tell me how to get the SU to my phone to flash it?
Click to expand...
Click to collapse
you copy it to your sdcard. also since you have twrp installed NEVER do a factory reset from the bootloader only do it in twrp.

a box of kittens said:
download what he linked you to your phone.. boot into twrp click into twrp and press install and find the zip and click on it
Click to expand...
Click to collapse
My problem is getting it downloaded to my phone. I'm kinda stuck on the TWRP screen.

Reboot system...

swerg said:
My problem is getting it downloaded to my phone. I'm kinda stuck on the TWRP screen.
Click to expand...
Click to collapse
have you tried reboot system? while you are in twrp you could mount usb storage then copy supersu to your sdcard and flash it.
only time i ever got stuck in twrp was when i accidentally flashed twrp to boot instead of recovery in which case it will always enter recovery. did you run "fastboot flash boot <twrp>.img" on accident? the proper command is "fastboot flash recovery <twrp>.img". when you flash recovery always good to run "fastboot erase cache".

I went to reboot. System. It started my phone and just went right back to the TWRP screen.

reflash twrp and boot.img to the proper places just incase

Can you give me a link and or a small guide to doing that? I'm kinda clueless when it comes to doing this kinda stuff.

I'm not the brightest with Androids lol.

Frequently Asked Questions
Look it's a STICKY

DvineLord said:
have you tried reboot system? while you are in twrp you could mount usb storage then copy supersu to your sdcard and flash it.
only time i ever got stuck in twrp was when i accidentally flashed twrp to boot instead of recovery in which case it will always enter recovery. did you run "fastboot flash boot <twrp>.img" on accident? the proper command is "fastboot flash recovery <twrp>.img". when you flash recovery always good to run "fastboot erase cache".
Click to expand...
Click to collapse
How would I go about coping supersu to my sdcard? I have my phone hooked up via USB and I have it on mount USB storage but I can't seem to find it.

swerg said:
How would I go about coping supersu to my sdcard? I have my phone hooked up via USB and I have it on mount USB storage but I can't seem to find it.
Click to expand...
Click to collapse
what the frill

I have my phone hooked up to my pc. I can't seem to find where I can copy the SU to my sdcard.

Didn't want to make another thread lol -- quick question! -- Do you need an unlocked bootloader to flash twrp even if I'm s-off?

i believe so
---------- Post added at 10:12 PM ---------- Previous post was at 10:12 PM ----------
swerg said:
I have my phone hooked up to my pc. I can't seem to find where I can copy the SU to my sdcard.
Click to expand...
Click to collapse
did you mount it in twrp?

DvineLord said:
did you mount it in twrp?
Click to expand...
Click to collapse
Yes I mounted it in twrp. It started installing HTC MTP Device but it failed. Is that a required drive?

[Q] Could not mount /data ! Phone Stuck!

I flashed a CM based ROM, and decided to get back to Slimkat. Opened my recovery ( Philz CWM ) wiped everything, and now tried to restore my nandroid ! And suddenly Im on Can't mount /sdcard ! I can't even flash a new ROM or do anything, I get stuck on Google's boot logo if I want to get to the ROM.
Let's note that I had no USB debug checked as I was only checking out the newly flashed ROM. So am I literally in a dead situation? Anyone please may help ?

Ensifolk said:
I flashed a CM based ROM, and decided to get back to Slimkat. Opened my recovery ( Philz CWM ) wiped everything, and now tried to restore my nandroid ! And suddenly Im on Can't mount /sdcard ! I can't even flash a new ROM or do anything, I get stuck on Google's boot logo if I want to get to the ROM.
Let's note that I had no USB debug checked as I was only checking out the newly flashed ROM. So am I literally in a dead situation? Anyone please may help ?
Click to expand...
Click to collapse
Clean fastboot install :/ Solved the issue for me

try and format cache. If still no luck, fastboot flash cache cache.img

rootSU said:
try and format cache. If still no luck, fastboot flash cache cache.img
Click to expand...
Click to collapse
Can I still fastboot even if I have no USB debugging enabled? The phone will interact with the commands normally? ( Since as I mentioned before I flashed the ROM only to check out and played with no settings at all, didnt know this is going to happen )

Ensifolk said:
Can I still fastboot even if I have no USB debugging enabled?
Click to expand...
Click to collapse
fastboot commands are done in the bootloader. USB debugging is an Android setting. The 2 are not related even in the slightest.

rootSU said:
fastboot commands are done in the bootloader. USB debugging is an Android setting. The 2 are not related even in the slightest.
Click to expand...
Click to collapse
Thank you sir ! Im sorry to go further saying that I have never used fastboot even thought this is my third nexus device, the regular way of me having a Nexus is using a toolkit on day one to Unlock/Root and then the rest is always done to me on a Recovery !
I am currently downloading the Factory Image to flash it via fastboot ( There are instructions on how to do that ) But will delete everything on my phone.
Is there a way I can save myself right now without any loss? Via fastboot commands? And how can I do it? ( Im really sorry for taking your time and mixing my inexperience )
You'd be a life saver hehe

Ensifolk said:
Thank you sir ! Im sorry to go further saying that I have never used fastboot even thought this is my third nexus device, the regular way of me having a Nexus is using a toolkit on day one to Unlock/Root and then the rest is always done to me on a Recovery !
I am currently downloading the Factory Image to flash it via fastboot ( There are instructions on how to do that ) But will delete everything on my phone.
Is there a way I can save myself right now without any loss? Via fastboot commands? And how can I do it? ( Im really sorry for taking your time and mixing my inexperience )
You'd be a life saver hehe
Click to expand...
Click to collapse
Dont flash the entire factory image.
just use the
fastboot flash cache cache.img
Then you won't wipe the device.
This is why not to use toolkits. fastboot is essential basic knowledge and using toolkits means you dont get to learn it

rootSU said:
Dont flash the entire factory image.
just use the
fastboot flash cache cache.img
Then you won't wipe the device.
This is why not to use toolkits. fastboot is essential basic knowledge and using toolkits means you dont get to learn it
Click to expand...
Click to collapse
You are totally right about that I should learn about it ! Hahaha. Okay, I opened a command promt and I am in the bootloader, where should I get the cache.img from? And should I place it in a certain folder? cause apparently I tried doing this command and it didn't work, I guess i have to get the cache.img from somewhere ( Im really sorry mate...Thanks again )

Ensifolk said:
You are totally right about that I should learn about it ! Hahaha. Okay, I opened a command promt and I am in the bootloader, where should I get the cache.img from? And should I place it in a certain folder? cause apparently I tried doing this command and it didn't work, I guess i have to get the cache.img from somewhere ( Im really sorry mate...Thanks again )
Click to expand...
Click to collapse
Have a read of the "how to flash a factory image" thread in general. Just remember, dont follow it blindly as you'll flash the whole factory image.

rootSU said:
Have a read of the "how to flash a factory image" thread in general. Just remember, dont follow it blindly as you'll flash the whole factory image.
Click to expand...
Click to collapse
Promise this is the last question I hope. I am actually on that page. I have downloaded the factory image BUT when I extract it via Winrar I only get a one file as an output (hammerhead-kot49h-factory-02006b99)
EDIT: I renamed the extracted file to .zip and extracted again, now I have the files displayed on that page...Trying to figure out now how to flash the cache.img

Ensifolk said:
Promise this is the last question I hope. I am actually on that page. I have downloaded the factory image BUT when I extract it via Winrar I only get a one file as an output (hammerhead-kot49h-factory-02006b99)
Click to expand...
Click to collapse
Extract it again.

Ensifolk said:
Promise this is the last question I hope. I am actually on that page. I have downloaded the factory image BUT when I extract it via Winrar I only get a one file as an output (hammerhead-kot49h-factory-02006b99)
Click to expand...
Click to collapse
Its a .tar file. Extract it again

...

I successfully flashed cache.img But the problem is still there in my recovery, can't mound /sdcard
Think I have to flash the whole factory image ? :-/

Ensifolk said:
I successfully flashed cache.img But the problem is still there in my recovery, can't mound /sdcard
Think I have to flash the whole factory image ? :-/
Click to expand...
Click to collapse
Maybe. Can you mount /data?
If so you can adb pull your photos etc off there from data/media/0 - otherwise no such luck
You can find instructions here if you need: http://forum.xda-developers.com/showthread.php?t=2534010

Ensifolk said:
I successfully flashed cache.img But the problem is still there in my recovery, can't mound /sdcard
Think I have to flash the whole factory image ? :-/
Click to expand...
Click to collapse
I think you'v nothing to loose by flashing the whole factory image. If /sdcard can't be mounted in this situation, I think that's because you did (or a toolkit) did something wrong and break it. I don't think that you'll be able to save anything.
(It's my point of view. Maybe somebody else has an idea ?)

rootSU said:
Maybe. Can you mount /data?
If so you can adb pull your photos etc off there from data/media/0 - otherwise no such luck
You can find instructions here if you need: http://forum.xda-developers.com/showthread.php?t=2534010
Click to expand...
Click to collapse
I cannot mount /data even after flashing cache.img - Hence I think I am dead by this stage and I can no more recover whatever I have on the phone. Factory image flashing then ?

Yep, I would

And there we go, I did it, phone back to life. Thank you guys ! A LOT! Appreciated ! pretty much !
Allow me to recall the scenario : I was on Slimkat, decided to try Mahdi Rom ( CM Based ), Backup before flashing, flashed, wanted to revert back. And this can't mount /sdcard there. No idea what could be it...
What recovery you guys recommend me to use ? - Lesson I learned today? I should know how to use fastboot and ditch the Toolkit galore.

Well, seems that you did'nt do anything wrong. Maybe a problem with the rom or something else occur.
Next time, maybe, do a backup and, then, copy it to your computer
For the recovery, I use CWM 6.0.0.4

[Q] CROMBi-kk flash

Hi!
I hope you can help me.
I obviously did something wrong.
Well I did unlock my tablet and got twrp running, also installed the rom but next after the reboot it just doesn't work and i will get this message (see the picture)
After that i am sent back to the interface of twrp.
I just recogniced I have twrp v.2.6.1.0 running - is that the problem?
Hopefully somebody can help me!
greets agepi

agepi91 said:
Hi!
I hope you can help me.
I obviously did something wrong.
Well I did unlock my tablet and got twrp running, also installed the rom but next after the reboot it just doesn't work and i will get this message (see the picture)
After that i am sent back to the interface of twrp.
I just recogniced I have twrp v.2.6.1.0 running - is that the problem?
Hopefully somebody can help me!
greets agepi
Click to expand...
Click to collapse
YOU MUST BE ON THE ASUS STOCK JB 4.2.1 BOOTLOADER VERSION 10.6.1.14.x AND TWRP 2.6.3.2+ OR CWM 6.0.4.6+ BEFORE FLASHING THIS ROM.
This is copied directly from the Developers ROM.
Cheers

agepi91 said:
Hi!
I hope you can help me.
I obviously did something wrong.
Well I did unlock my tablet and got twrp running, also installed the rom but next after the reboot it just doesn't work and i will get this message (see the picture)
After that i am sent back to the interface of twrp.
I just recogniced I have twrp v.2.6.1.0 running - is that the problem?
Hopefully somebody can help me!
greets agepi
Click to expand...
Click to collapse
You didn't use 'Wipe Data' from the bootloader, did you?
Read the OP for CROMBI-KK, compare it to what you did.
Describe in detail what that was.
"Does not work" is not very helpful...
Check if you can get into fastboot.
Sent from my DROID4 using Tapatalk

Well,
I can go to Twrp recovery and fastboot
I did install the rom with everything present I think.. had to select some things and finish the installing
after that I had to reboot and now i just get the image with the penguins.
Can I somehow go back to the original rom? to restart these things?

agepi91 said:
Well,
I can go to Twrp recovery and fastboot
I did install the rom with everything present I think.. had to select some things and finish the installing
after that I had to reboot and now i just get the image with the penguins.
Can I somehow go back to the original rom? to restart these things?
Click to expand...
Click to collapse
If you made a nandroid before flashing this, then yes, you should be able to restore it.
But let's take it from the beginning. Post your bootloader, recovery and rom versions.
As long as you have access to fastboot you can fix this, so don't do anything hasty.
And please be as specific as you can about what you did. We can only help you if we find out where you went wrong.

berndblb said:
If you made a nandroid before flashing this, then yes, you should be able to restore it.
But let's take it from the beginning. Post your bootloader, recovery and rom versions.
As long as you have access to fastboot you can fix this, so don't do anything hasty.
And please be as specific as you can about what you did. We can only help you if we find out where you went wrong.
Click to expand...
Click to collapse
hm ok I will try
well, I didn't make a nandroid backup - my fault :<
are there specific bootloader? I was on JB 4.2.1
I am now on twrp v2.6.3.2 but I was while I did the flashing on twrp v2.6.1
hm I did flash crombi-kk rom from the OP
maybe I did some wipe before in twrp .. i think it was recommended?
so now I can't do any reflash or anything in twrp - everytime I want to do something there is this error:
E: Unable to open '/cache/recovery/.version'
I also can't get access to my external SD

Check if you can get into fastbot.
Long press Power and Volume Down until you see tiny script.
Read it and post the bootloader version: 10.6.1.14.?

berndblb said:
Read it and post the bootloader version: 10.6.1.14.?
Click to expand...
Click to collapse
Well it reads: ww_epad-10.6.1.14.10-20130801

agepi91 said:
Well it reads: ww_epad-10.6.1.14.10-20130801
Click to expand...
Click to collapse
All right, your bootloader is current.
I would recommend that you flash TWRP 2.7 in fastboot, then boot into it, do a Factory Wipe in TWRP (that can take upwards of 60 minutes) and flash the rom again.

Ok.. I tried but I got the answer
failed (data transfer failure (too many links))
hm I think I've got no connection, right?
well and now I get the message:
FAILED ( command write failed( invalid argument))

What do you get with 'fastboot devices'?
Sent from my K00C using Tapatalk

I get 015d2a5068541017 fastboot

agepi91 said:
I get 015d2a5068541017 fastboot
Click to expand...
Click to collapse
Alright, everything good so far.
Now download the TWRP 2.7 blob for the tf700 and put it into the same folder as your fastboot.exe.
Then issue this command:
Code:
fastboot -i 0x0B05 flash recovery twrp.blob
if that is successful
Code:
fastboot reboot
Then boot into TWRP via the fastboot menu.
Then you can factory wipe and flash the rom

berndblb said:
Alright, everything good so far.
Now download the TWRP 2.7 blob for the tf700 and put it into the same folder as your fastboot.exe.
Then issue this command:
Code:
fastboot -i 0x0B05 flash recovery twrp.blob
if that is successful
Code:
fastboot reboot
Then boot into TWRP via the fastboot menu.
Then you can factory wipe and flash the rom
Click to expand...
Click to collapse
Well I did that but nothing works
I've got now twrp 2.7 and i did that factory wipe but nothing ever happens.. just the usual message
'unable to open 'cache/recovery/.version'
Don't know what I did wrong :<
http://imageshack.com/a/img842/662/kwy9.png
that's the message I everytime get - doesn't matter if it's a wipe or install or something else

in bootlooder at the top there is this message:
>key driver not found... booting 05<

is it possible to formate my complete data, because I think therein lies the problem, exept fastboot on my device and flash a recovery from fastboot?

agepi91 said:
is it possible to formate my complete data, because I think therein lies the problem, exept fastboot on my device and flash a recovery from fastboot?
Click to expand...
Click to collapse
If you want to try that, go to the Wipe menu in TWRP, then to Advanced and choose "format data".
In TWRP this can take 90 minutes! D not interrupt it and make sure the tablet is charged or connected to power.
But this will erase your entire data.
The recovery has it's own partition which you can erase in fastboot:
Code:
fastboot erase recovery
.
Then flash the new recovery. You could also try TWRP 2.6.3.2 if 2.7 doesn't work.

agepi91 said:
is it possible to formate my complete data, because I think therein lies the problem, exept fastboot on my device and flash a recovery from fastboot?
Click to expand...
Click to collapse
Your posted image indicates that simulation mode is active in TWRP - turn if off in TWRP settings.
To format data, it's approximately this: Wipe -> Advanced -> Format -> Data -> confirm
Note that it takes up to 2 hours to format and trim the eMMC.
---------- Post added at 09:15 PM ---------- Previous post was at 09:14 PM ----------
berndblb said:
The recovery has it's own partition which you can erase in fastboot:
Code:
fastboot erase recovery
.
Click to expand...
Click to collapse
...which is usually a stupid idea if you don't know exactly what you are doing.

Well I don't know how but it suddenly worked.. i could reinstall the rom but now it seems i am stuck in a bootloop between the picture of the four penguins and a bootscreen of crombi-kk with loading tiles under it
between these two the tablet is rebooting itself constantly

Go back to recovery and do a wipe only Calvin cache and Cache.
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app

Stuck at TWRP

Hi Guys
I installed TWRP on my Sensation XE. The bootloader is unlocked.
I tried to install different roms but it gets stuck on the ´Next´ button immediatly after loading the Rom in TWRP. Is that because of S-off? I didn't do that.
I cannot start my phone now.
PLease advice,
Kind Regards
Guido

guidonno said:
Hi Guys
I installed TWRP on my Sensation XE. The bootloader is unlocked.
I tried to install different roms but it gets stuck on the ´Next´ button immediatly after loading the Rom in TWRP. Is that because of S-off? I didn't do that.
I cannot start my phone now.
PLease advice,
Kind Regards
Guido
Click to expand...
Click to collapse
change your recovery to 4ext
http://d-h.st/rG7
extract the recovery.img and flash it via fastboot command
the command is fastboot flash recovery recovery.img
then from 4ext format all partitions except sdcard
enable smartflash from 4ext(if you are on S-ON)
flash the rom
done
note: enable smartflash exactly before flashing the rom

i'll give it a try at home. Thank you!
I'll let you know.

Thank you so much! It worked really good
So happy

rzr86 said:
change your recovery to 4ext
extract the recovery.img and flash it via fastboot command
the command is fastboot flash recovery recovery.img
then from 4ext format all partitions except sdcard
enable smartflash from 4ext(if you are on S-ON)
flash the rom
done
note: enable smartflash exactly before flashing the rom
Click to expand...
Click to collapse
I have exactly the same problem and I don't understand what to do. Please, help me

MortalPizza said:
I have exactly the same problem and I don't understand what to do. Please, help me
Click to expand...
Click to collapse
boot your device to the bootloader,select fastboot and connect it to the pc
extract the recovery.img from the link above and place it in the folder where you have adb/fastboot files in your pc
open a command window from that folder and type
fastboot flash recovery recovery.img
fastboot reboot bootloader
then you will have 4ext recovery installed

rzr86 said:
boot your device to the bootloader,select fastboot and connect it to the pc
extract the recovery.img from the link above and place it in the folder where you have adb/fastboot files in your pc
open a command window from that folder and type
fastboot flash recovery recovery.img
fastboot reboot bootloader
then you will have 4ext recovery installed
Click to expand...
Click to collapse
I've used OneX AIO tool to flash it, and now I have 4ext Recovery Touch and my Sensation is alive again! Thank you!

Hi guys I tried to flash ''cm-13.0-20151108-UNOFFICIAL-pyramid'' via ''TWRP-2.8.7.0-pyramid-r9-cm13'' but that failed, ever since I am stuck at the HTC logo, I tried to flash numerous older firmwares but try to factory reset/wipe I get an ''unable to format storage'' so any Rom I try fails. It was previously running older version of CM fully rooted which I have fully backed up via CWM but now cant restore is due to TWRP & CWM being incompatible.
I have tried so many ADB commands but ADB only responds when in TWRP any time else like in Fastboot I get absolutely no response at all, I have also tried to flash CWM back any way possible but have failed same with ''4EXT-Recovery-Touch-v1.0.0.5-RC5-PG58IMG''. Also tried RUU but kept on receiving 'Connection Error' even though the USB cable was connected & works fine, also tried using ''Sensation_All-In-One_Kit_v3.1'' no luck either with any of its commands.
I have attached the Bootloader screen if it can help with this boot loop.
I have never has such issues with Samsung Phones so I am a total noob with HTC phones so any help would be really great.
Any help would be really great from this amazing community!

TWRP has broken my partition table. I cannot format via parted due to the fact it now has 'overlapping partitions'. No recovery can fix this including 4ext. Completely stuck at the minute. I don't want to use a microsd card as storage when I have internal storage available. Is there anyone that can help or has had any success? I am S-OFF and bootloader UNLOCKED.
Tried stock RUU via P58..zip and get's stuck part way through (I think at system or SD)
Help! I'm sure there's someone that can fix the partition table. The format of the internal storage sd is fat32 - which I believe is where the problem started from. I don't want to let this problem defeat me although I have spent an age trying to sort it...too late to give up
Any help is highly appreciated.
Cheers

Mitster2015 said:
TWRP has broken my partition table. I cannot format via parted due to the fact it now has 'overlapping partitions'. No recovery can fix this including 4ext. Completely stuck at the minute. I don't want to use a microsd card as storage when I have internal storage available. Is there anyone that can help or has had any success? I am S-OFF and bootloader UNLOCKED.
Tried stock RUU via P58..zip and get's stuck part way through (I think at system or SD)
Help! I'm sure there's someone that can fix the partition table. The format of the internal storage sd is fat32 - which I believe is where the problem started from. I don't want to let this problem defeat me although I have spent an age trying to sort it...too late to give up
Any help is highly appreciated.
Cheers
Click to expand...
Click to collapse
http://forum.xda-developers.com/htc-sensation/help/recovering-data-mount-issues-t2859588
read post #35

MortalPizza said:
I've used OneX AIO tool to flash it, and now I have 4ext Recovery Touch and my Sensation is alive again! Thank you!
Click to expand...
Click to collapse
How you did it?

markNOOB said:
How you did it?
Click to expand...
Click to collapse
Yeah how did you do it? Too late for me now though as my device is S-OFF and I'm stuck in QHUSB_DLOAD bricked mode. I have tried unlimited.io's s-off etc no joy. Wonder if there is ever going to be anything that can take me out of this apart from jtag.

---------- Post added at 09:08 PM ---------- Previous post was at 09:06 PM ----------
[/COLOR]
markNOOB said:
How you did it?
Click to expand...
Click to collapse
Mitster2015 said:
Yeah how did you do it? Too late for me now though as my device is S-OFF and I'm stuck in QHUSB_DLOAD bricked mode. I have tried unlimited.io's s-off etc no joy. Wonder if there is ever going to be anything that can take me out of this apart from jtag.
Click to expand...
Click to collapse
What I've done has been, through a PC with Windows Vista (I have been unable to get anything with Windows 8 onwards ), I installed the HTC One X All In One tool, and in the part where the recoverys are located, there are three (CWM, TWRP and other), I went to the Data / Recoveries folder and I deleted the TWRP, replacing this with an image of 4EXT Recovey Touch, and putting the same name that has the recovery erased. Then I went to the tool, I installed TWRP (which was 4EXT which replaced it) and my Sensation revived. Good luck!

For me it is not loading to 4ext, after flashing it..... stuck at htc logo. if i install twrp or cwm it boots to it... any idea how to fix it?