Related
As of this time, we do not have a way to restore to stock rom. We are waiting for the rom to be reuploaded somewhere. If you have it, please get with me.
Click here and download the three files:
http://forum.xda-developers.com/showpost.php?p=27647443&postcount=441
Unzip and place those three files on your sd card that goes in your zeen.
Power off the zeen.
Insert the sd card.
Hold the two volume buttons, then press and hold the power button and wait for the flash to complete.
It will say to remove sd card and press any key. Do so.
Once powered up, your should have a semi aosp build of....I think it's 2.2, correct me if wrong.
just ordered one from hp using purchaseedge points. free tablet=good. should be here this week. cant wait to start playing around with it. i cant imagine hp spent a ton trying to secure the hardware from hackers, since it is only a $400 device. hopefully this will gain more interest now that the samsung tab isnt living to the hype
metfoo said:
just ordered one from hp using purchaseedge points. free tablet=good. should be here this week. cant wait to start playing around with it. i cant imagine hp spent a ton trying to secure the hardware from hackers, since it is only a $400 device. hopefully this will gain more interest now that the samsung tab isnt living to the hype
Click to expand...
Click to collapse
I don't really think this things is gonna get much further. I wish it would, but of all the people on here only like 6 have it.
i just bought one yesterday ($299 @ bb w/ staples pricematch). haven't had a chance to do much with it yet, but i'll play with it this weekend. btw, i'm in KC too.
i have one also one issue though i dont have the printer for the setup is there a workaround for this? >_<
Don't need printer to setup
you shouldn't need a printer to set up just ZEEN. I know it forces you to dock ZEEN to printer, in that case, pull the menu down from the top, manually go into settings. Let me see if I can come up with documentation. I just did it and its working fine.
jlechner,
do you remember which version of Z4root u used?
Come on people... Lets root this thing...
metfoo said:
just ordered one from hp using purchaseedge points. free tablet=good. should be here this week. cant wait to start playing around with it. i cant imagine hp spent a ton trying to secure the hardware from hackers, since it is only a $400 device. hopefully this will gain more interest now that the samsung tab isnt living to the hype
Click to expand...
Click to collapse
I have had my Zeen for two weeks now. One thing that has been very helpful is taking all the apk. files I like on EVO and putting them on the Zeen sd card. Most are working great!
I would like to know Z4 root that was used also.
nark0117 said:
you shouldn't need a printer to set up just ZEEN. I know it forces you to dock ZEEN to printer, in that case, pull the menu down from the top, manually go into settings. Let me see if I can come up with documentation. I just did it and its working fine.
jlechner,
do you remember which version of Z4root u used?
Click to expand...
Click to collapse
No, but after you asked that I remember when I used the latest one, it kinda messes up. It puts it in some kind of test mode, and upon almost any reboot wipes everything.
z4root v1.3.0 gives me temporary "partial" root. Superuser works for some root apps like Root Explorer and AutoStart, but Titanium Backup and AutoStart do not see root.
Still unable to use RomManager because the device is still NAND locked.
Sent from my C510a using Tapatalk
Has this gone anywhere? I just picked up a printer and got the pretty nifty tablet with it... or is that I picked up an HP Zeen tablet and got a pretty functional printer with it... Either way NIFTY COMBO!!
I have a rooted Nexus One and Motorola Backflip as well as a jailbroken iPhone 4, 3GS, and 3G.
This thing has to have a loophole somewhere. If we could get it running Android 2.2 and drop that horrific Yahoo interface we might be getting somewhere.
HP Zeen
I am having the same issues with the Z4root. Some things work and some thing don't recognize the root.
The one thing I love about the tablet is the battery life. I installed everything that was on my IPOD, and plug it into any amp--hours of music, and it is great for watching movies.
It is like getting free tablet with a great printer. No monthly payment!!!
Holding both volume buttons at boot will ask to erase the user data. But that's all I've found so far.
Has anyone been able to use Dolphin HD browser on this? Amazon has the Printer for $296 with free shipping. Now the price point is where it should be. Could someone list the known working apps for this tablet? Thanks.
Edit: I found it for $259.99 from Adorama with free shipping.
td1320, i have been using Dolphin Browser HD on the Zeen for about a month and a half now, it works great.
Zeen root
Which rooted apps have you been able to put in??
Do you guys recommend this printer? I have seen some bad reviews.
Sent from my ADR6300 using Tapatalk
The printer is pretty good to me. It's fast and responsive. On another note, I tried installing the marketplace on this tablet and it keeps coming back it couldn't be installed. I wonder why... Astro File Manager works!
nark0117 said:
you shouldn't need a printer to set up just ZEEN. I know it forces you to dock ZEEN to printer, in that case, pull the menu down from the top, manually go into settings. Let me see if I can come up with documentation. I just did it and its working fine.
Click to expand...
Click to collapse
Hi, I got one of these at a junksale today minus the printer or anything to charge it.
I have made up a charger with correct voltage & amps and fitted a suitable plug. It charges.
I am still to get past the setup screen much help would be appreciated in knowing how you do this - if at all possible.
One thing I have been able to do is when battery warning comes on access the dashboard and connect it to my wireless network. I am looking though the settings now to see if this setup process can be overridden in there by perhaps deleting something or killing a service.
I have an IP address of it sat on my network, could you SSH into it I wonder?
Ideally I could do with taking it into a store and just plugging it into one on the shelf on display. But that would be a bit cheeky.
Can anyone help?
Thanks
Andrew
hostyorkshire said:
Hi, I got one of these at a junksale today minus the printer or anything to charge it.
I have made up a charger with correct voltage & amps and fitted a suitable plug. It charges.
I am still to get past the setup screen much help would be appreciated in knowing how you do this - if at all possible.
One thing I have been able to do is when battery warning comes on access the dashboard and connect it to my wireless network. I am looking though the settings now to see if this setup process can be overridden in there by perhaps deleting something or killing a service.
I have an IP address of it sat on my network, could you SSH into it I wonder?
Ideally I could do with taking it into a store and just plugging it into one on the shelf on display. But that would be a bit cheeky.
Can anyone help?
Thanks
Andrew
Click to expand...
Click to collapse
I picked my Zeen up from a local classified site for $50 because the kid couldnt get it past the printer setup. I'm assuming it was probably stolen the more I think of it, since if it was purchased with the printer it would be setup already... but I bought it from someone who claimed to be the original owner so i cant do much more about it.
On The Way home I had a brilliant idea.
I stopped at staples, took my zeen in and docked it on their printer for 30 seconds and it finished the setup... Pretty easy...
However, I have since reset the device and foun an easier way.
YOU MUST HAVE A POWER/DATA Mini-USB CABLE FOR THIS!
it can not be just a power cable, it has to have DATA capabilities.
(I Used A MacBook For This But It Should Work For A PC)
-Plug in your USB cable to the computer
-Plug In your Zeen AC Adapter (YOU MUST HAVE AN AC ADAPTER AND MINI USB)
-then boot your zeen to the setup menu
-plug in the mini usb to your zeen and hopefully it gives you the option to continue setup. (If it doesnt give it about 60 seconds)
-If it doesnt work unplug the mini-usb and plug it back in
I have reset twice now and this has worked for me.
-If it doesn't show up unplug the mini-usb and then plug it back in.
I have reset twice now, the first time i had to unplug it a few times but the 2nd reset it took it the first time.
I've recently bought a second-hand Asus Transformer TF101, my first ever Android device. I have a 1.5Tb Seagate FreeAgent GoFlex external drive full to the brim of documents, music and videos which I'd like to be able to use with my transformer. When I connect the drive the light on the connecting piece lights up, but nothing comes up on the Transformer's screen and I'm not able to see or access the drive on either the native file manager or the Astro one. I've tried rebooting the Transformer with it connected and have connected and disconnected it several times, but it's made no difference.
What would be the problem and is there any way to fix it? Does Android lack the drivers to access the drive? I thought Samsung would have released Android specific drivers for it, considering the vast quantity of Android devices they sell. Is it anything that the upcoming ICS update might fix? Or could we expect a driver/fix from Google and/or Samsung at some point in the coming months, or is it just tough, the device will never work with it. I'm just using the stock ROM and am cautious about switching to another, but I might if there's a stable ROM that fixes this, if it's the only option.
I'm bicycle touring around Australia and New Zealand for the next few years and I have no access to a computer to transfer files between the two. The battery life of the TF101 is great for travelling, as is the fact I an charge it by bicycle pedalling, but if it can't do something as basic as access an external drive then I'm not impressed and will likely have to manage without for the moment and then jump ship to a Windows 8 tablet later in the year.
GlynG said:
I've recently bought a second-hand Asus Transformer TF101, my first ever Android device. I have a 1.5Tb Seagate FreeAgent GoFlex external drive full to the brim of documents, music and videos which I'd like to be able to use with my transformer. When I connect the drive the light on the connecting piece lights up, but nothing comes up on the Transformer's screen and I'm not able to see or access the drive on either the native file manager or the Astro one. I've tried rebooting the Transformer with it connected and have connected and disconnected it several times, but it's made no difference.
What would be the problem and is there any way to fix it? Does Android lack the drivers to access the drive? I thought Samsung would have released Android specific drivers for it, considering the vast quantity of Android devices they sell. Is it anything that the upcoming ICS update might fix? Or could we expect a driver/fix from Google and/or Samsung at some point in the coming months, or is it just tough, the device will never work with it. I'm just using the stock ROM and am cautious about switching to another, but I might if there's a stable ROM that fixes this, if it's the only option.
I'm bicycle touring around Australia and New Zealand for the next few years and I have no access to a computer to transfer files between the two. The battery life of the TF101 is great for travelling, as is the fact I an charge it by bicycle pedalling, but if it can't do something as basic as access an external drive then I'm not impressed and will likely have to manage without for the moment and then jump ship to a Windows 8 tablet later in the year.
Click to expand...
Click to collapse
Ok for one win8 will have alot of bugs when released if the desktop edition is anything to go buy. There is never a instant fix!
It could be the format of your drive the tf plays best with ntfs
It could be that some hdds are encrypted and only designed to work with certin os's and need programs etc
Either way you need to find out more about your hdd for us
All custom ROM's have support for ntfs drives i currently use a 2.5inch 500gb seagate on my tf101
Sent from my tf running krakd warped an twisted 1544mhz Blades kernel
I've recently completed a trip to Disney World with my family and took over 300 Pictures. I used my MS PRO 3 to store the pics and do some work.. Unfortunately i woke up today and the device won't boot up.
I took the Microsoft store where i bought it for assistance and i was told it is most likely gone forever.
Since this is suppose to be a Laptop replacement, they're able to reach the Hard drive registry and pull any folder that is customer created or use a USB drive and install the corrupted files?
I was wondering is there is any ways to retrieve this pictures or document. Know with a standard laptop its possible. Why not the pro.
You may ask why, Why i didn't save it thru One Drive, Well the photo were too big and the types of transfer is not allow... I never had these types of issues with my android devices($500) something different with the Surface pro 3 ($1400).
Hypothetically, you could extract the solid-state drive from the tablet and connect that to another device. You'd pretty much need to take the tablet to pieces to do so, though.
This is the same problem you would have if any other device with non-removable storage (MBA, iPad, Android tablet, $300 Dell Venue 8 Windows tablet, etc.) doed so completely you couldn't even begin the boot process, by the way. It sucks that it happened to a high-end device but that's what warranties are for. As for the lost photos, well, that sucks but unless they're still on the camera memory card then recovering them is going to be difficult and/or expensive if it's possible at all, and it might not be.
mseck said:
I've recently completed a trip to Disney World with my family and took over 300 Pictures. I used my MS PRO 3 to store the pics and do some work.. Unfortunately i woke up today and the device won't boot up.
I took the Microsoft store where i bought it for assistance and i was told it is most likely gone forever.
Since this is suppose to be a Laptop replacement, they're able to reach the Hard drive registry and pull any folder that is customer created or use a USB drive and install the corrupted files?
I was wondering is there is any ways to retrieve this pictures or document. Know with a standard laptop its possible. Why not the pro.
You may ask why, Why i didn't save it thru One Drive, Well the photo were too big and the types of transfer is not allow... I never had these types of issues with my android devices($500) something different with the Surface pro 3 ($1400).
Click to expand...
Click to collapse
Well, it's not really fair to compare the SP3 to an Android device. Android uses ARM processors and the SP3 uses x86 processors. x86 is the kind of processor that you would find in a laptop or desktop. You should be able to retrieve any files from your SP3 as you would from a laptop. It has the same hardware as a laptop.
Keep in mind that MS has 14 day return policy as does most computer retailers. If it is a mechanical failure it is under warranty and they will replace it. If you have a replacement plan they will replace it no matter what.
Unfortunately, most will tell you that the way to get files from a busted PC is to take the hard drive out and put in a different PC. I don't think you want to take your SP3 apart for a few files.
The best solution would be to find a way to boot your PC from a USB. If you can manage that, you can copy the files to a USB. You're probably going to need a USB hub.
Forget it guys let's admit it the sp3 is a beautiful piece of hardware and fantastic fete of engineering. But truth be told mine bricked on day 1 and had to spent an extra 200$ shipping it back for an exchange from Microsoft.
There are way too many occasions reported that I wonder what the mac boys would say about this. Thinks I wanna let the cat out of the bag.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Take it you dont have a mSD card in the machine and use File History?
Last July my note 12.2 crashed and I had to wipe and reset. I thought I had been saving my pictures to my card like my phone but I alas I had not. I was resigned after a month to do the reset, did so, rerooted, installed twrp and was just ready to get rolling again after so long without a tablet. However I read a great blog on imaging tablets and being able to recover many many files, found it plausible and could now go after my son's baby pictures and Christmas pictures. However I will need to install Linux on my computer and get that going again to do it and I've not been able to find a long weekend to do it without interruption by the kids. I just need to image it then I can take as long as I need to carve for the pics. I just can't get the time. It's been 8 months I've been without my tablet and it's starting to effect me negatively. So what do I do?
1. Beg my wife for the time to do the needed work to make the image. This would be difficult at best, and I'm understating that massively.
2. Try and find a new 12.2 64gb and use that till I get the time to image the old one. Expensive and I'm getting an old device.
3. Get a surface tablet, expensive and not android.
4. Get a new Samsung android tablet. New but I don't know what to get and if any newer ones can be rooted or have an SD card slot.
I'll take any and all suggestions of help.
Thank you in advance.
Signed
-in desperate need of a tablet to use
Would it really take more than an hour using a live cd to recover files? Most of the time it's doing its thing scanning the filesystem while you can do other things.
Just wanted to know what people have got running on thier systems now adays..
I had a 128g sdcard and a 32g USB in the PX3 that did the trick. But now I have changed cars and upgraded the unit.. am looking at using a few SSD's I have kicking around.
There was old threads on guys setting up external powered USB hubs and running 1t 2.5 drives when these units first came out..
But with the advent of low powered SSD's almost a dime a dozen.. (well 250gb for under $50).. with luck there is not too many barriers to plug and play..
I say that tongue in cheek as I know about the limits of Android previously seeing anything over 32gb & 64gb..but as it has matured it has been getting better with the storage situation..
So what is max people have got going at the moment?
While I am at it..
(And I didn't think it was right.to clutter up the ROMs threads with this question)
Split screen ROMs..
Just had a look at both devolopment ROMs and couldn't see if any had the ability.
I remember seeing a few units with this ability around the traps as I was searching for mine.. ( maybe just a sales gimick)
But the old transformers had this ability via the very talented Tim's rom work and I am surprised it hasn't become the norm in Android..
I do understand that we have 'draw over top of other apps' permission.. and that gmaps does do it's little minimizer thing..but it's kinda crude in that it is taking re-estate on top of say the music app..
A better look on these bigger screens would be GPS on one side and music on the other..
I mean they have the CPU and GPU memory to handle this..
The Android 8.0 ROMs do have split screen (even stock). With an app open, just press and hold the "recent apps" button and you can then select another app to run and they will run in split screen mode.
However, not all apps support this - and some will force-close as well. It's a nice feature to have, but it's a little limited right now.
Give it a try though...
Thanks for that will try it and report back.
Understand that it's also a safety issue while driving..
(Lol and that is another conversation ).
But seriously it would be better to set this up before hitting the road. i.e GPS navigation on one side and selection of music playing on the other..and or radio stations..
That way your not trying to reach across playing with it while driving.
I know, I know and it's been debated a tad in another thread. Thus the reason they are supposed to be locked down from driver interaction via motion sensors.
Which if a named brand, is a good idea to migrate liabilities.. you don't want to be held liable if some fool crashes and kills themselves and or others while using a entertainment system that comes stock with a car.. (nanny state type scenario).
This also brings up good steering wheel key mapping especially now that many of these units are going down the path of being knob less..and we are going for the full screen experience.
dgcruzing said:
Just wanted to know what people have got running on thier systems now adays..
I had a 128g SD card and a 32g USB in the PX3 that did the trick. But now I have changed cars and upgraded the unit.. am looking at using a few SSD's I have kicking around.
There was old threads on guys setting up external powered USB hubs and running 1t 2.5 drives when these units first came out..
But with the advent of low powered SSD's almost a dime a dozen.. (well 250gb for under $50).. with luck there is not too many barriers to plug and play..
I say that tongue in cheek as I know about the limits of Android previously seeing anything over 32gb & 64gb..but as it has matured it has been getting better with the storage situation..
So what is max people have got going at the moment?
Click to expand...
Click to collapse
128GB sd card, formatted Fat32 (by android unit itself)
Works fine except
Oreo want to "check CF card for errors" each time it comes out of sleep, or on boot.
With and 8GB or 16GB CF card, that does not take too much time, but a 128GB CF takes about 45 seconds !!!
Maybe a USB SSD (as opposed to a USD Flash Drive stick), would not require this error Check. I suspect a USB Flash drive will.
This alone might be the justification for a USB SSD
Haven't been able to test it as yet .
Seems I got the slow boat from China on this supplier of SSD and M2 housings..
With luck they are here this week and can run some tests and report back.
Pretty sure these are not USB 3 connections we have but USB 2?.. need to check the specs..do know there is 3 USB inputs on the unit..
dgcruzing said:
Haven't been able to test it as yet .
Seems I got the slow boat from China on this supplier of SSD and M2 housings..
With luck they are here this week and can run some tests and report back.
Pretty sure these are not USB 3 connections we have but USB 2?.. need to check the specs..do know there is 3 USB inputs on the unit..
Click to expand...
Click to collapse
Might do better to actually measure the speed with a 3.0 USB device.
They can say anything in the spec !!!
It may be 3.0, but it also may be slow !!
Finally the bits and pieces arrived today and had a quick play with it..
So far not looking good.
Will document it a bit more and report back..
But it seems the same old story as with the PX3 machines..and the limitations of Android.
While this is being addressed in newer versions of phones and Android version upgrades.. i.e the phones with 128 and 256g ..
These units are still limited to the lower end spectrum.
But with that being said..
The 180g SSD and housing through the machine into a tantrum.. as in pulling to much power through the ports it seems. As lost GSP ability..
Yes truely.. could not get a satellite fix . Pulled the drive and it worked.. put 32gig USB in..not drama..SSD back in and same..
Dropped the 256g M2 in.. formatted as Fat32.. and it was seen via that machine..but as I was in a hurry..I didn't get time to copy anything across to it..
Had a quick play tonight and was thinking about transfer from internal memory to it..but now it's not being seen..
Will put it through the format again and see if it works..
Got to be noted I am using generic Chinese housings..and thus anything could be up with these..
As even with the formatting..there is a bit to play around with..as in..my win10 machines are not seeing them but when I plug them into the Synology they are showing up fine..
Once again.. what have others been successful with or is it just the 128g USBs sticks that are going to have to do?.
And from reading..most are only loading up 1x of the USB ports due to the problematic USB board/port burn out?..
Seems a waste to have 3x USB ports and can't use them.. have tested all 3 with the 32g USB..and they are seeing it and playing music and video off it..
Personally, I'm happy just using the SD card slots. With a custom ROM, 128GB NTFS cards work great (read and write). I recently just tried disabling the filesystem check as well and now they basically mount almost instantly. Since i never remove them, I don't see the need to check the filesystems every time the unit comes out of sleep. So far, I haven't had any issues. If I ever do run into issues, I'll re-enabled the filesystem check since it only took a few seconds with NTFS anyway - even with fully-loaded 128GB SD cards.
For me, with (2) SD cards slots and 128GB SD cards (never tried 256GB cards) - that is plenty of storage. Plus, you can always switch SD cards as well. I just don't have the need for more that 256GB of storage on my head-unit. I'm guessing that you could use 128GB or 256GB NTFS USB thumb drives as well (so 3x128GB or probably even 3x256GB). You just need to root and/or install a custom ROM. It's really easy to do - with all of the effort you are putting into trying to make things work with stock un-rooted, you can have easily installed a custom ROM and went that route. You can always go back to stock un-rooted if you want/need to.
Or - maybe you can connect a powered USB hub if USB power is the issue? Obviously, you'd need to figure out how to power it, but I'm sure it can be done...
Yes.. chances are I will go down the custom rom route.
Just haven't had the time to sit in the car for the afternoon and flash it.
The unit I have got hasn't got sdcard slots.
(Or it may have but from some reading there is a possibility that there is one hidden behind the facing they put on to suit each car... I did have a check before install on how that is put on and seems it's just a set of screws.. and I suppose I can just send an email to the team and ask..lol)
That was the setup on the PX3 unit just had a 128 sdcard and it worked fine..
Only reason I grabbed the housing for the SSD's and M2 was they where sitting doing nothing so I might as well use them for something and or give them away.
Anyway will book an afternoon in for a play as the after market reversing cam wiring harness turned up today.. with luck it's just plug and play..
Might flash a rom and upgrade the MCU..
As per banter in some of the other threads..once the setup is done and I am a happy camper with stability.. then won't be a flashaholic as don't see the need to flash for flashing sake..just want to jump in and GPS, music, Radio or watch porn with the girl in the car..
Lol..I. Saying that just to get a chuckle from you know who...?
@jtrosky
@dgcruzing
How did you manage to disable the filesystem check after sleep?
I use tweo 128gb sticks on my PX5 MTCE device and they took about 30-40s to be mounted, because they're checked for errors each time.
This is very annoying - could you tell me how you disabled it (or any workaround)?
Thank you!