According to Tasker, my N5's proximity sensor is always active. DynamicNotifications is not activating because of the issue, even after disabling Tasker. I'm not using a screen protector, just a Spigen Neo Hybrid case, which shouldn't interfere.
Anyone else having the issue or have advice?
Sent from my Nexus 5 using Tapatalk
I should add: the sensor works flawlessly during a phone call. I'm chalking it up to something that's changed in the way Android handles the sensor.
Sent from my Nexus 5 using Tapatalk
Related
I installed temple run recently on my note and I noticed the accelerometer wasn't working well. Any way to fix this sirs?
vaporized from ma NOTE
Recalibrate the accelerometer. The option should be somewhere in the system settings, depending on which rom you use. Put the phone screen up on a flat surface and press calibrate. Should do the trick.
Settings - display - horizontal & gyroscope calibration
Sent from my GT-N7000 using xda premium
discovered the problem. The problem was was not with the accelerometer but with the gyroscope. The problem arose from my phone casing. It had a pair of magnets and I think those were messing with the gyroscope. Without the casing everything works fine.
vaporized from ma NOTE
Wat case has a pair of magnets.?
Sent from my GT-N7000 using xda premium
Just some very sturdy case I got off some accessory store. The magnets are for catching the flip cover. Discarded it anyway. Using the original Samsung flip cover now. That doesn't protect the phone though.
vaporized from ma NOTE
I bought three N5 for my parents and myself. The flap cases for the first two of them work well: when the flap is lifted up, the screen wakes up; when the flap is folded, the screen shuts down. However, the third one doesn't work well. Sometimes it works like the other two, but most time it doesn't.
The proximity sensor works well when I make calls. I also installed "Proximity sensor finder" to test the sensor, which actually detects the case accurately. But for some reason I don't know, the Android system doesn't shut down the screen even when the sensor detects a folded case. Anybody knows what the problem might be and how to fix it? Thanks.
Most proximity sensor cases have a magnet near where the volume rocker is. Do all three of your cases have that?
No, none of them has a magnet.
jd1639 said:
Most proximity sensor cases have a magnet near where the volume rocker is. Do all three of your cases have that?
Click to expand...
Click to collapse
pb1153 said:
No, none of them has a magnet.
Click to expand...
Click to collapse
Would the phone in question happen to have a screen protector? Sometimes the screen protector can cause this issue if it isn't installed correctly. Make sure the proximity sensor/light sensor isn't covered by the screen protector.
sent from my neXus 5
pb1153 said:
No, none of them has a magnet.
Click to expand...
Click to collapse
They have to. That's the way they turn off the screen. It's not the same sensor that turns off the screen when you're on the phone.
Yes, there is a screen protector, which has a whole at the location of the proximity sensor, so it shouldn't be a problem. What baffles me is that "Proximity sensor finder" is able to detect the case cover accurately, but the system cannot respond correctly.
OuncE718 said:
Would the phone in question happen to have a screen protector? Sometimes the screen protector can cause this issue if it isn't installed correctly. Make sure the proximity sensor/light sensor isn't covered by the screen protector.
sent from my neXus 5
Click to expand...
Click to collapse
I see. This explains the problem. It seems that the tiny magnet in my case is not effective as it doesn't fold perfectly. Thanks a lot!
jd1639 said:
They have to. That's the way they turn off the screen. It's not the same sensor that turns off the screen when you're on the phone.
Click to expand...
Click to collapse
pb1153 said:
Yes, there is a screen protector, which has a whole at the location of the proximity sensor, so it shouldn't be a problem. What baffles me is that "Proximity sensor finder" is able to detect the case cover accurately, but the system cannot respond correctly.
Click to expand...
Click to collapse
If you're 100% sure that the screen protector isn't obstructing the sensor then I would then clean around the area where the sensor is with a micro fiber cloth. If that doesn't doing anything then I would temporary switch the flip case with the one on your parents N5. It is possible that the case on one phone can be faulty. If that still doesn't work then I'd factory reset the phone.
And if that doesn't work... I'd get a warranty replacement. More than likely you have a faulty case.
sent from my neXus 5
OuncE718 said:
If you're 100% sure that the screen protector isn't obstructing the sensor
Click to expand...
Click to collapse
Its not relevant. They don't work with proximity. They use the hall effect magnetic sensor
Sent from my Nexus 5 using Tapatalk
rootSU said:
Its not relevant. They don't work with proximity. They use the hall effect magnetic sensor
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
You're actually right come to think of it.
sent from my neXus 5
I think I should blame the faulty case, as jd1639 and rootSU also pointed out. The magnet in the case is not effective. I believe what jd1639 has said, screen on/off during calls uses proximity sensor, but the response to case flap relies on magnet.
OuncE718 said:
If you're 100% sure that the screen protector isn't obstructing the sensor then I would then clean around the area where the sensor is with a micro fiber cloth. If that doesn't doing anything then I would temporary switch the flip case with the one on your parents N5. It is possible that the case on one phone can be faulty. If that still doesn't work then I'd factory reset the phone.
And if that doesn't work... I'd get a warranty replacement. More than likely you have a faulty case.
sent from my neXus 5
Click to expand...
Click to collapse
Hey,
Today I dropped my nexus 5, and its screen was cracked at the top right corner. The touch screen works fine, I think that just the outer glass is injured.
So I noticed that in call, my screen won't get on. I read online that it might be because the proximity sensor. Now, is it possible that he got hurt in the fall? Or is it just because the screen over the sensor is cracked?
If I replace the screen, will it be OK?
And if not, where can I find a replacement sensor?
Thanks!
Sent from my Nexus 5 using XDA Free mobile app
Cracking the screen directly in front of the sensor will make the sensor think something is close. However, this doesn't mean the sensor is working. Take it in for a professional opinion
Sent from my Nexus 5 using Tapatalk
Since I am a newbie in this technology, what is a proximity sensor and what is it used for when it detects or does not detect something?.. I installed the proximity sensor finder app on my Nexus 6 and I could not tell any details except timer started when portion of phone front was covered YET the measurement displayed did not say anything other than 0 or 5.00000 etc.. I also use the phone in speaker mode ..
The proximity sensor is there to turn the screen off during a phone call when you move the phone to your head. It turns the screen back on when you move it away from your head after. On the 6P it is located below the speaker grill.
Thank you,, so the proximity sensor serves a power saving function? I just tested this with my Nexus 6 using a TruShield TGSP and it worked fine.. I find it strange that a clear glass screen protector would not work on the Nexus 6P ??
painfree said:
Thank you,, so the proximity sensor serves a power saving function?
Click to expand...
Click to collapse
No, the purpose of it is to deactivate the screen when it's against your face on a call so that you don't press things on the screen with your ear/face.
Yes, it does save a little power (you can power off the screen while on a call), but is really helps the screen know when you have the phone to your face. This allows it to disable input so you don't hit buttons on the screen while on a call.
It's a neat feature, but adds some difficulty because not all screen protectors are cut out to allow it to function fully. Like those above said, it helps you by not pressing buttons while you're talking.
I would also assume that android uses the proximity sensor for "on body detection" to tell if it's in your pocket or out in the open etc.
I am having similar sort of issue, I have glass protector on nexus 6P and when I dial any number the screen will go black and will not come back until the other person hangs up. even the phone is not near my face, how strange. not sure how to resolve
I also have a problem of my screen not turning on if I move it away from my face. At first I thought it was proximity sensor dead, but I used the proximity sensor finder app and was able to see that it works fine if I cover it. So it could be a bug with dialer/caller app in Marshmallow. Or maybe there's a setting somewhere.
How to turn off the proximity sensor? I have a tgsp that does not have a cut out for the sensor.
Return the tgsp because it's defective. The newer revisions do not suffer from the defect.
DeathmonkeyGTX said:
Return the tgsp because it's defective. The newer revisions do not suffer from the defect.
Click to expand...
Click to collapse
My screen does not go dark when I put my 6P by my ear. How can I check if my sensor is on or off? TThanks
My device worked smooth for a while, when I applied tempered glass the proximity sensor not working, any solution?
Sent from my M2007J20CI using Tapatalk
deva_noah said:
My device worked smooth for a while, when I applied tempered glass the proximity sensor not working, any solution?
Sent from my M2007J20CI using Tapatalk
Click to expand...
Click to collapse
Taking off tempered glass
deva_noah said:
My device worked smooth for a while, when I applied tempered glass the proximity sensor not working, any solution?
Sent from my M2007J20CI using Tapatalk
Click to expand...
Click to collapse
check if the tempered glass is not at top, i do and my proximity sensor stop working, then moved down the tempered glass and work again.
I use tempered glass full coverage and no problem with proximity sensor.
With my Sony phone, I got a screen protector applied by a phone stall employee in a mall, however it seemed that they didn't have the specific type for my phone and so the protector they applied was covering half my proximity sensor located on the left of my top speaker and brand logo. That's when I noticed having calling problems such as when I dial or call someone, my phone screen immediately turns black and it doesn't want to turn on even when I press the power button. So what I did after much thinking, I just went for it and broke off the piece of screen protector that was blocking my sensor. Worked 100%