Related
anyone else have this problem?
I have the latest HTC Driver.
When I first got my phone it was perfectly normal until I rooted my phone. I would have to try plugging and unplugging the Stock HTC USB multiple times for my computer to recognize my phone. It is getting pretty annoying. I was wondering if anyone else has this problem as well. (doesnt matter which ROM I use, problem continues.)
P00t said:
anyone else have this problem?
I have the latest HTC Driver.
When I first got my phone it was perfectly normal until I rooted my phone. I would have to try plugging and unplugging the Stock HTC USB multiple times for my computer to recognize my phone. It is getting pretty annoying. I was wondering if anyone else has this problem as well. (doesnt matter which ROM I use, problem continues.)
Click to expand...
Click to collapse
You sure it's not the cable ?
Or, perhaps the usb port connector on the phone, or the one you're trying to plug into could have loose/damaged contacts?
Obviously, somethings changed or different. Try to replicate as many of the conditions that you had when it did work, as you can.
Scott_S said:
You sure it's not the cable ?
Or, perhaps the usb port connector on the phone, or the one you're trying to plug into could have loose/damaged contacts?
Obviously, somethings changed or different. Try to replicate as many of the conditions that you had when it did work, as you can.
Click to expand...
Click to collapse
i have three HTC phone charger. 2 of them are in perfect condition, brand new, and they both still give me the same problem. maybe, something is wrong with my phone inside?
P00t said:
i have three HTC phone charger. 2 of them are in perfect condition, brand new, and they both still give me the same problem. maybe, something is wrong with my phone inside?
Click to expand...
Click to collapse
I'm talking about the cable itself, and maybe that's what you are talking about when you say "htc phone charger."
As far as "something wrong with your phone inside," you perhaps are missing or not understanding what I'm referring to.
Look at your phone up close at the part where you plug it in. Real close. You should see 4 little metal strips... Contacts. I was trying to suggest for you to check if there was a physical issue, loose, bent connector on the cable or on that part of the phone.
Or, on the connector of the port on the computer you were trying to connect it to.
The fact that you have to do it several times for it to recognize, but that it at least DOES eventually recognize it, made me suspect it's something intermittent, like a bad/loose connector, or a cable that has one of the wires inside it broken.
I don't know what other than something having to do with the usb connector on the phone, possibly where it's soldered to the PCB, that would cause it to intermittently give you problems.
I'm just posting for brief warning/general info for you guys. When I got to work tonight I plugged in my USB OTG cable which I have been using w/ no issues on both my N7 and S3 since July and then plugged in a 64gb flash drive that I have also been using since launch. When I plugged in the flash drive, I heard a pop, the screen went blank and the phone is totally dead. A quick search showed while this isn't incredibly common, it has happened to several people. Most blamed the OTG cable, but I disceted mine and it had no broken wires and no shorts. I turned up a thread on root wikiz that basically said that it is the power management IC self destructing and there is nothing that can be done to repair it. So, just a heads up if you use OTG-- I am not sure I will use it again on this phone as it seems it is just a matter of time...
Later,
Jason
jacampb2 said:
I'm just posting for brief warning/general info for you guys. When I got to work tonight I plugged in my USB OTG cable which I have been using w/ no issues on both my N7 and S3 since July and then plugged in a 64gb flash drive that I have also been using since launch. When I plugged in the flash drive, I heard a pop, the screen went blank and the phone is totally dead. A quick search showed while this isn't incredibly common, it has happened to several people. Most blamed the OTG cable, but I disceted mine and it had no broken wires and no shorts. I turned up a thread on root wikiz that basically said that it is the power management IC self destructing and there is nothing that can be done to repair it. So, just a heads up if you use OTG-- I am not sure I will use it again on this phone as it seems it is just a matter of time...
Later,
Jason
Click to expand...
Click to collapse
From another forum...but saw your thread. Does this mean your phones is screwed or just the charger?
Jarmezrocks said:
From another forum...but saw your thread. Does this mean your phones is screwed or just the charger?
Click to expand...
Click to collapse
Phone
Sent from my Galaxy SIII
Which USB cable did u use?
Sent from my SGH-T999 using xda premium
jacampb2 said:
I'm just posting for brief warning/general info for you guys. When I got to work tonight I plugged in my USB OTG cable which I have been using w/ no issues on both my N7 and S3 since July and then plugged in a 64gb flash drive that I have also been using since launch. When I plugged in the flash drive, I heard a pop, the screen went blank and the phone is totally dead. A quick search showed while this isn't incredibly common, it has happened to several people. Most blamed the OTG cable, but I disceted mine and it had no broken wires and no shorts. I turned up a thread on root wikiz that basically said that it is the power management IC self destructing and there is nothing that can be done to repair it. So, just a heads up if you use OTG-- I am not sure I will use it again on this phone as it seems it is just a matter of time...
Later,
Jason
Click to expand...
Click to collapse
This happened to me. Verizon will warranty the phone. I wondered what actually blew up in the hardware. I am surprised it hasn't happen to more people, seeing how you really don't have any control over whether it blows up or not.
RotaryXperiment7 said:
Which USB cable did u use?
Click to expand...
Click to collapse
This. I just ordered one lol.
jacampb2 said:
I'm just posting for brief warning/general info for you guys. When I got to work tonight I plugged in my USB OTG cable which I have been using w/ no issues on both my N7 and S3 since July and then plugged in a 64gb flash drive that I have also been using since launch. When I plugged in the flash drive, I heard a pop, the screen went blank and the phone is totally dead. A quick search showed while this isn't incredibly common, it has happened to several people. Most blamed the OTG cable, but I disceted mine and it had no broken wires and no shorts. I turned up a thread on root wikiz that basically said that it is the power management IC self destructing and there is nothing that can be done to repair it. So, just a heads up if you use OTG-- I am not sure I will use it again on this phone as it seems it is just a matter of time...
Later,
Jason
Click to expand...
Click to collapse
Sorry to here about your phone. I was jut about to go buy one of these cables.
This same thing happened to my phone a few weeks ago. It went totally dead out of nowhere, I was taking photos at the time.
You shouldn't have a problem getting a replacement even if you don't have insurance.
Good Luck
I have heard stories about that happening, though its not common, it is surprising that its so low considering its random and no one knows exactly what causes it
at least you don't have to factory restore before returning
Sorry guys, I just woke up. Was on graveyard shift last night. Anyhow, the cable was a generic ebay right angle otg cable, about 5" or so in length. I am 99% certain it had nothing to do with the cable though, just a hardware problem. As mentioned above I dissected the cable and it had no problems. I could still use it on my Nexus 7 with no issues. I had the cable plugged in before inserting the flash drive and it was fine until the flash drive was plugged it.
The Root Wikiz thread I mentioned said that someone had sent theirs in to be Jtag'ed thinking it was just hard bricked. The response from the people where he sent it was that they had seen a number of them with the PMIC damaged and that there was nothing that their services could do for them.
My guess is there are some marginal PMIC's out there and that when they switch the port from charge to host mode they just cant take the current and pop. The fact that I made it nearly 5 months using the same OTG cable on a regular basis kind of lends credence to this theory, but who knows. All I know is that it was totally dead, absolutely no signs of life regardless of what I tried.
FWIW I was rooted and running paranoid android, but I have found reports of this happening to bone stock phones as well as any variation of ROM. Verizon did warranty the device. Oddly, the tech told me "I have never heard of this happening" but didn't even ask me to try anything with the phone, he just said that they would ship me a new one for warranty replacement.
New device is here, I'm off to root and unlock! Good luck guys.
Later,
Jason
jacampb2 said:
Sorry guys, I just woke up. Was on graveyard shift last night. Anyhow, the cable was a generic ebay right angle otg cable, about 5" or so in length. I am 99% certain it had nothing to do with the cable though, just a hardware problem. As mentioned above I dissected the cable and it had no problems. I could still use it on my Nexus 7 with no issues. I had the cable plugged in before inserting the flash drive and it was fine until the flash drive was plugged it.
The Root Wikiz thread I mentioned said that someone had sent theirs in to be Jtag'ed thinking it was just hard bricked. The response from the people where he sent it was that they had seen a number of them with the PMIC damaged and that there was nothing that their services could do for them.
My guess is there are some marginal PMIC's out there and that when they switch the port from charge to host mode they just cant take the current and pop. The fact that I made it nearly 5 months using the same OTG cable on a regular basis kind of lends credence to this theory, but who knows. All I know is that it was totally dead, absolutely no signs of life regardless of what I tried.
FWIW I was rooted and running paranoid android, but I have found reports of this happening to bone stock phones as well as any variation of ROM. Verizon did warranty the device. Oddly, the tech told me "I have never heard of this happening" but didn't even ask me to try anything with the phone, he just said that they would ship me a new one for warranty replacement.
New device is here, I'm off to root and unlock! Good luck guys.
Later,
Jason
Click to expand...
Click to collapse
Wow, that sucks, but I am glad you got another S3. I have been using this one that I got from Amazon. It has a couple of usb ports and 2 card readers. I have been very happy with it. It is extremely useful when I am at family functions, and everyone has taken a lot of pictures and video. I can grab their cards and pull the pics and video onto my 64 Gig SD card on my phone. People are amazed I can do this with my phone! However, now I am a little worried about using it. I will keep this in mind, and only use it on the occasions that I really need it. Thanks for the heads up!
Rob
my s3 discharging immediately
hi everybody....
i have an issue with my s3....i make an OTG cable and plug it into my s3...and i just can get power from it,no data.
but i think the s3 is already wasting power and i must charging it after a day.
can anybody help me!!!!!
arminghm said:
hi everybody....
i have an issue with my s3....i make an OTG cable and plug it into my s3...and i just can get power from it,no data.
but i think the s3 is already wasting power and i must charging it after a day.
can anybody help me!!!!!
Click to expand...
Click to collapse
One day charge is normal if using phone. If gonna use OTG you are overusing and can expect 1/2 day. Buy good cable if want data.
I had something similar happen except, my usb sent a static spark from my oc to my phone. Didn't fry it completely, but messed up something that would no longer dock to pc, dock to car our go into deep sleep.
Wonder if the two issues are related.
Be sure to discharge any static in you usb called before plugging them into your phone.
Sent from my SCH-I535 using xda app-developers app
prdog1 said:
One day charge is normal if using phone. If gonna use OTG you are overusing and can expect 1/2 day. Buy good cable if want data.
Click to expand...
Click to collapse
your right..but its used for 3 days....i bought an otg cable and use it...thats amazing...i can use mouse,keyboard and other devices in my s3.
but i still have my problem...
my s3 is in flight mode and and doesnt do anything...but its discharging..and i dont know the problem is sent from my os or my hardware..
idont kno that the os is screwed up or is something wrong with battery.
is there any command that tell os to dont discharging???
i love my s3 so much
arminghm said:
your right..but its used for 3 days....i bought an otg cable and use it...thats amazing...i can use mouse,keyboard and other devices in my s3.
but i still have my problem...
my s3 is in flight mode and and doesnt do anything...but its discharging..and i dont know the problem is sent from my os or my hardware..
idont kno that the os is screwed up or is something wrong with battery.
is there any command that tell os to dont discharging???
i love my s3 so much
Click to expand...
Click to collapse
Discharging is what the battery always does when not plugged into A/C power and turned on, and even sometimes when it is plugged into A/C power (when you get in the top 10% of full it starts going through discharge/charge cycles to keep it within the top 10% of power but never totally full. This prevents overcharging and explosions)
That said:
A sudden reduction in the runtime for the battery under the same average load is almost always the battery going bad.
If you mean the battery doesn't last as long because you now use OTG - those things you plug into the phone need to get their power somewhere. The phone battery is it.
So now you are powering the phone + whatever other things you attach to it. Some of them can drain a lot more power then you might think. You just never noticed much (if at all before) because your total reserves weren't such a tiny amount.
If you stop using OTG devices and your battery capacity bounces right back up to where it was before, then you can reasonably infer the extra gadgets are the culprit.
(if you stop OTG stuff for a few days and the battery still sucks when before it didn't, probably need to buy a new battery because yours is most likely shot.)
Assuming it seems to work fine...
So two choices, right? No accessories and lots of battery life, or lots of accessories and no power to run them with.
well...not really:
It's probably not always possible - but how often do you use OTG near A/C power?
Whenever you are near somewhere you can plug in, the first thing you should plug into your OTG cable (besides the phone) is a USB hub with a power cord.
...and really, if you want to use those power hungry USB hard drives and things like that, then you really can't without taking the stress off of the phone of supplying that power - that hard drive just half spins up like a car that cranks but won't start.
Every crank in that car wears the battery down and beats up the starter when it doesn't fire up the engine. Just like every spin up but not quite read of the hard drive puts incredible load on the S3 to try to throw enough current at it fast enough to keep it happy. Just beating it up for nothing.
Which brought me to what I wanted to bring up for some consideration:
Think about trying to use a powered hub whenever you can as the first thing off the OTG cable, should take an immense amount of stress off of the S3 in making it all work.
Bet at the least you reduce the risk of popping since the power spikes will be much less - that powered hub is a pretty solid buffer for that kind of stuff when you are constantly popping flash drives in and out.
I remember way back when for the Nook Color when some really sharp people made OTG happen out of the thin air - no way Barnes & Noble had that on even a remote list of possibilities when they were ready to throw the device to the masses and see what happened.
If you wanted to use more then the smallest of thumb drives you needed a powered hub. The device wasn't designed for it, and simply wasn't able to squeeze more then a paltry amount of power out in reverse. (but it was just enough to talk to a powered hub...)
Anywhere that you can plug in your powered buffer should contribute to avoiding the problem the OP posted about. The thought experiment (hopefully) growing from this post? How much truth does this theory exhibit?
Edit: Totally missed this post:
arminghm said:
hi everybody....
i have an issue with my s3....i make an OTG cable and plug it into my s3...and i just can get power from it,no data.
but i think the s3 is already wasting power and i must charging it after a day.
can anybody help me!!!!!
Click to expand...
Click to collapse
Here you say you made an OTG cable, the first post I quoted you in you said you bought one. If you made it, i'd say that is your problem.
The quality of the cable you use absolutely matters. Higher quality parts = higher quality results.
I have a bunch of micro USB cables (as i'm sure many of you do also - ) ... and from some of them I get an absolute night/day result in charging.
Some cables (mostly the ones from the dollar store or older cables) just plain suck. They can't bring enough power from the same A/C adapter as my OEM HTC/Samsung cables. (I have some motorolla OEM cables from around the time of the droid X launch - they are closer to the dollar store cables in quality - haven't tried recent motorolla OEm cables, hopefully they got better or I got a bad batch over a six month period)
Using the low quality cables I can absolutely lose power plugged in just being a wifi hotspot with the screen on, until it eventually goes critical and dies. (this I tend to notice when my pc banished to the corner of nowhere loses all network connectivity) - whereas with the HTC/Samsung cables from within the last two years keep me near full with that being the only difference.
I'd rather have a few good cables then a bag full of POS dollar store ones. That little bit better material, little bit tighter QC adds up to a big difference in the final outcome.
This same thing happened to me when I plugged the same type of cheap right elbow OTG cable from ebay into my brand new S3 (2 days old with about one hour of usage). The cable worked fine with USB drives, a mouse, or a keyboard used alone on the S3. The cable was plugged into a USB 4 port hub with multi-card reader. The screen was off when I plugged it in so it appeared to just be off. Any attempts to power it on were fruitless. I smelt the phone right afterward and there wasn't any burnt smell. Plugging in the phone resulted in it getting pretty warm but not to an extreme yet the battery remained cool. It appears to have burnt something between the battery and lines but leaving the components intact thus causing the excess of heat. BTW the hub/reader is fine. I won't be using that again on my new one but I will be attempting to use a different hub that has been working fine on my wife's RAZR MAXX HD. Just hope this is a very isolated incident and not a bad batch from the retailer.
Edit: The S3 is a blue 16G Verizon model. The S3 was on stock ROM when this happened (not like that would prevent death from inferior circuit protection components).
Were you using a powered hub, or passive hub?
Anyone tried a DAC off the OTG cable?
BowDown said:
Were you using a powered hub, or passive hub?
Anyone tried a DAC off the OTG cable?
Click to expand...
Click to collapse
Don't do it. I've fried 2 GS3s with a UCA-220 DAC over otg.
First time with a regular OTG cable, the second time with a OTG/phone charging cable, the power came unplugged and zap. I'm lucky Verizon has replaced the phone two times.
I think the best solution is to completely isolate the DAC power from the phone power. A circuit to charge the phone with the otg/charge cable and a separate circuit to power the DAC.
uber_mike said:
Don't do it. I've fried 2 GS3s with a UCA-220 DAC over otg.
First time with a regular OTG cable, the second time with a OTG/phone charging cable, the power came unplugged and zap. I'm lucky Verizon has replaced the phone two times.
I think the best solution is to completely isolate the DAC power from the phone power. A circuit to charge the phone with the otg/charge cable and a separate circuit to power the DAC.
Click to expand...
Click to collapse
Wouldn't use of a powered usb hub remove any power issues? I purchased a OTG cable today.. I had planned to connect it to a powered hub, and run the DAC off that?
I noticed today that my charging port seems to be loose. I've never dropped the phone or had any other issues with it. But I noticed that my phone was on the charger and not charging. I then moved the connection slightly and it started charging again. If it gets moved at all it doesn't charge. So two questions:
1. Does anyone know if AT&T warranty will cover something like this? I called and got a really generic answer so I might just have to go into the store... blah
2. If it isn't covered in the warranty, does anyone have any idea where to buy a new port and/or how to fix it??
WeWearFedoras said:
I noticed today that my charging port seems to be loose. I've never dropped the phone or had any other issues with it. But I noticed that my phone was on the charger and not charging. I then moved the connection slightly and it started charging again. If it gets moved at all it doesn't charge. So two questions:
1. Does anyone know if AT&T warranty will cover something like this? I called and got a really generic answer so I might just have to go into the store... blah
2. If it isn't covered in the warranty, does anyone have any idea where to buy a new port and/or how to fix it??
Click to expand...
Click to collapse
That sounds like user damage/wear and tear which is not covered AFAIK, unless you got the add-on insurance.
I've only had the phone for about 20.days and I'm always really careful with my phones. I'm going.to take it in the store to see if I can get a warranty replacement... I'm probably not even going to unroot or anything lol. wish me luck.
Have you tried a different cable....the ports can get damaged, but it's typically the cable end that wears and it seems like its the port
Sent from my HTC One XL using Tapatalk 2
18th.abn said:
Have you tried a different cable....the ports can get damaged, but it's typically the cable end that wears and it seems like its the port
Sent from my HTC One XL using Tapatalk 2
Click to expand...
Click to collapse
I can confirm this...just happened to me , new cable did it...
I tried another cable almost immediately and it was still not working. But I found an old kindle usb chord and tried it... the connection is nice and tight. I had to modify the case I put on my phone so the kindle chord would fit but now it works great and the chord is almost twice as long as the original HTC chord!
worked a treat
WeWearFedoras said:
I tried another cable almost immediately and it was still not working. But I found an old kindle usb chord and tried it... the connection is nice and tight. I had to modify the case I put on my phone so the kindle chord would fit but now it works great and the chord is almost twice as long as the original HTC chord!
Click to expand...
Click to collapse
Thanks for this, worked a treat ... grabbed an old water cam cable. :good:
Hoping it's normal and not just mine, because I plug/unplug mine more than the average person.
Directly comparing to my year old Nexus 4 -- there's a lot more side-to-side play in the USB port. It doesn't feel as solidly plugged in...
Anyone with both devices notice the same? Nexus 4, the plug doesn't wiggle at all, but in the Nexus 5 it wiggles in any directly.
Not a major issue.
USB Port difficult to plug
I am having the opposite problem. I have noticed it takes a fair amount of pressure to plug the usb into the nexus 5 port
and likewise with unplugging. I am concern the extra force will affect the port or usb cord over time. I left a message with Google helpdesk so will see if this is just my phone or a defect in port or plug.
palomo32 said:
I am having the opposite problem. I have noticed it takes a fair amount of pressure to plug the usb into the nexus 5 port
and likewise with unplugging. I am concern the extra force will affect the port or usb cord over time. I left a message with Google helpdesk so will see if this is just my phone or a defect in port or plug.
Click to expand...
Click to collapse
yah, too tight for me too. :/
Once the USB is plugged in mine has a fair amount of Wiggle/ feels loose.
Think I'm going to return my phone as I also have the power button issue.
I found its to tight when you plug the micro port to your phone straight, but if you put the left side (or right side) first then slide the opposite side, it plugs in much much more easily.
Sent from my Nexus 7
If you had a Gnex you wouldn't be complaining about it being too tight. The USB port on the Gnex was a huge issue.
lowandbehold said:
If you had a Gnex you wouldn't be complaining about it being too tight. The USB port on the Gnex was a huge issue.
Click to expand...
Click to collapse
Mine was extremely tight. Then one charge later became loose side to side and up and down.
Is it the connector inside? I wonder if it moved out of position and I can move it back.
bringing an old thread back.
My USB port is also "loose" that it actually stops charging if I move it. Super annoying because it's a replacement phone I got last week. My old one didn't do this. Tried multiple USB cables.
NJ_RAMS_FAN said:
bringing an old thread back.
My USB port is also "loose" that it actually stops charging if I move it. Super annoying because it's a replacement phone I got last week. My old one didn't do this. Tried multiple USB cables.
Click to expand...
Click to collapse
if it is like you said with it not wanting to charge, then it is broken/faulty made. I would send it for a replacement in a heartbeat
Sent from my Nexus 5 using XDA Premium 4 mobile app
ArtSwitcher said:
if it is like you said with it not wanting to charge, then it is broken/faulty made. I would send it for a replacement in a heartbeat
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I would but I just got this one as a replacement. but I found my wife s4 white cable stays snugged with little play. I'll use that one now.. lol. But if its gets worse, I still got warranty time.
Try a different usb cable. It's not the usb "port" that gets loose overtime, it's actually the male end of the usb cable that gets loose. If you look at the connector at the end of the cable, you'll see 2 hooks on the top of it, overtime they become looser, that is your problem.
When I first got the n5 and tried it with the oem cable they included, it was a very tight fit. However, when I went to try another cable it felt much easier to plug in.
NJ_RAMS_FAN said:
bringing an old thread back.
My USB port is also "loose" that it actually stops charging if I move it. Super annoying because it's a replacement phone I got last week. My old one didn't do this. Tried multiple USB cables.
Click to expand...
Click to collapse
Sorry to bump an old thread, but did your problem resolved? did you RMA it or just used another cable, i am facing the same problem, it disconnects even if i move it slightly while connected, http://forum.xda-developers.com/google-nexus-5/help/battery-drain-charging-nexus-5-t2721239
madarchod said:
Sorry to bump an old thread, but did your problem resolved? did you RMA it or just used another cable, i am facing the same problem, it disconnects even if i move it slightly while connected, http://forum.xda-developers.com/google-nexus-5/help/battery-drain-charging-nexus-5-t2721239
Click to expand...
Click to collapse
hey, I ended up using my wife s4 cable. It's the white samsung. No issues. I guess the original LG allowed to much play.
NJ_RAMS_FAN said:
hey, I ended up using my wife s4 cable. It's the white samsung. No issues. I guess the original LG allowed to much play.
Click to expand...
Click to collapse
hmm, thanks, i'd try that.. :good:
madarchod said:
hmm, thanks, i'd try that.. :good:
Click to expand...
Click to collapse
I RMA's mine for this very reason. The cable simply would not stay in. The replacement phone had no such problem.
marleyfan61 said:
I RMA's mine for this very reason. The cable simply would not stay in. The replacement phone had no such problem.
Click to expand...
Click to collapse
i'd try with other cables, tried with my brother's htc usb cable yesterday, it charged normally, but this problem arises randomly, so might have to test for few more days.. :highfive:
Clean out the usb port, blow some compressed air in there or carefully use a toothpick. Even a small amount of dust or debris can cause the cable to feel loose. Then once it's fixed, throw away all wall chargers and use a wireless pad
Hi All,
I'm hoping someone here can share their opinions.
Recently I've been having charging issues with my XZ Premium. Started a few weeks ago, with the charger plugged in, it would randomly stop and start charging.
Lately it's been getting much worse. I have tried different chargers, cables, adapters etc. The original Sony USB cable plugged into a wall charger, and my laptop. My Dell laptop USB-C (thunderbolt) wall charger, as well as my Dell external battery charger, as well as MicroUSB cables with a USB-C adapter.
Without touching the cables or moving anything, sometimes it'll start or stop charging randomly.
I personally think it's the phone's USB-C connector. I've tried to clean it using a damp wooden toothpick and got some dust out, but it didn't make any difference.
The phone is rooted, and is out of warranty anyways. I also have a lot of security features installed which would make it hard for a tech to troubleshoot (needs passwords etc to be shut down or rebooted) and I store some cryptocurrencies in wallets on my phone.
Is it worth taking it to a tech (I live in Japan, and don't speak much Japanese) or should I be looking at an upgrade? If so, what is the recommended phone from Sony currently? I honestly really like the XZ Premium, so I'm tempted just to buy another one if mine can't be easily fixed.
Thanks!
Bit of an update.
I managed to get my phone to charge using the original Sony USB -> USB-C cable, with an adapter plugged into the thunderbolt port on my laptop. Charging is still incredibly slow though. Also, I noticed when it hit 30% charge, it stopped accepting charge unless the phone is unlocked. If I hit the lock button, the charge light switches off. It switches on again when I unlock it.
*Small edit* It stopped charging again at 31%, despite being unlocked.
Wiggling the cable in the phone socket doesn't seem to effect whether it charges or not, which should rule out the connector in the phone. It has also not registered as a device on my laptop, despite being connected via the USB cable, which would mean it's not specifically a battery issue either, as there's no data connection being made.
So I'm starting to think it's a hardware issue.
I've ordered a new Xperia XZ Premium, because I really do love this phone, and the new XZ2 Premium doesn't seem like much of an upgrade to me apart from the camera, and slightly faster performance. And as much as I'd love to have wireless charging, moving the finger print sensor, and no 3.5mm audio output is a massive dealbreaker for me.
mine died like this, was on charge, started to say charghing/discharghing until he turned off and never came back.. under warranty they changed MoBo/2 stickers/components (??)/ 2 screw and now is back like new
Long term bump.
I bought a new replacement 8142 and have been using that successfully, and I decided to try and fix the charging issues on my old one.
I've just installed a brand new genuine battery, charging port, and power/vol/camera button connections.
The phone booted up fine, but it's STILL not charging at all. Any ideas? Motherboard maybe?
tombow said:
Long term bump.
I bought a new replacement 8142 and have been using that successfully, and I decided to try and fix the charging issues on my old one.
I've just installed a brand new genuine battery, charging port, and power/vol/camera button connections.
The phone booted up fine, but it's STILL not charging at all. Any ideas? Motherboard maybe?
Click to expand...
Click to collapse
Maybe the flex cable isn't working
have only just started having this issue yesterday, have tried different charger and usbc cable combinations, cant even get my pc to recognise it as a plugged in turned off xzp and it wont turn on only show the battery icon with low level indicator in the red.
I have a similar issue.
When I connect my XZP to the pc using a Rampower cable USB-C to USB (sold as 5Gbps and 5V/3A power, thus an USB3.0 with fast charge of 15W) I suffer of the same issue exposed above: randomly the connection get interrupted.
While, charging the phone, yet with the above-mentioned cable and original Sony charger, I get no problem at all!
NB: I have never tried with the original USB cable...
Common fault with the xzp.
The actual connector from the logic board that the usb c module connects to burns out. Require a new logic board or connector to be replaced/soldered on and new usb c module.
kw0n2k said:
Common fault with the xzp.
The actual connector from the logic board that the usb c module connects to burns out. Require a new logic board or connector to be replaced/soldered on and new usb c module.
Click to expand...
Click to collapse
This is good news, because sourcing a mainboard is half the price of the phone, and I've already spent money on a new battery and charging port etc.
My 2nd G8142 phone has just started displaying the same symptoms, and I can't afford a complete replacement.
Can you confirm that this is the part I need? https://www.aliexpress.com/item/4000160901916.html
If so, I'll grab 2, and install into my old phone first to confirm the fix, before then installing one in my newer phone.
tombow said:
This is good news, because sourcing a mainboard is half the price of the phone, and I've already spent money on a new battery and charging port etc.
My 2nd G8142 phone has just started displaying the same symptoms, and I can't afford a complete replacement.
Can you confirm that this is the part I need? https://www.aliexpress.com/item/4000160901916.html
If so, I'll grab 2, and install into my old phone first to confirm the fix, before then installing one in my newer phone.
Click to expand...
Click to collapse
Im onto my second xzp and never had a charging issue
Beetle84 said:
Im onto my second xzp and never had a charging issue
Click to expand...
Click to collapse
Lucky you!
I'm onto my 2nd one, and have had the same charging issues with both.
Both phones have been rooted with a custom ROM, and I use my Dell smart-powerbank to charge them fairly often. So perhaps that is the cause of the early failures on both.
tombow said:
Lucky you!
I'm onto my 2nd one, and have had the same charging issues with both.
Both phones have been rooted with a custom ROM, and I use my Dell smart-powerbank to charge them fairly often. So perhaps that is the cause of the early failures on both.
Click to expand...
Click to collapse
I have unlocked both on day one :laugh:
I have never used a powerbank, could be a factor. Or just bad luck
My first xzp, i cracked the screen trying to replace the screen adhesive, so i bought a rosso red one from ebay.
tombow said:
This is good news, because sourcing a mainboard is half the price of the phone, and I've already spent money on a new battery and charging port etc.
My 2nd G8142 phone has just started displaying the same symptoms, and I can't afford a complete replacement.
Can you confirm that this is the part I need? https://www.aliexpress.com/item/4000160901916.html
If so, I'll grab 2, and install into my old phone first to confirm the fix, before then installing one in my newer phone.
Click to expand...
Click to collapse
Unfortunately I can't confirm if that is the exact part you need as I don't do repairs. All I can confirm is that my repairer has stated that he has seen XZP's with the same recurring issue with the connector burning out.
My guess is, that is the part as he had to micro solder a new connector to the logicboard.
kw0n2k said:
Unfortunately I can't confirm if that is the exact part you need as I don't do repairs. All I can confirm is that my repairer has stated that he has seen XZP's with the same recurring issue with the connector burning out.
My guess is, that is the part as he had to micro solder a new connector to the logicboard.
Click to expand...
Click to collapse
That's good enough for me! I'll grab a couple of them and see if it fixed my older phone first (because I've already tried the battery and the USB-C socket etc) Will update once I've done the repair.
Hope you can fix that problem and share some experience on this issue. Mine has a similar problem. The difference is that it can be charged to 100% but very slow and randomly stop.
sala499 said:
Hope you can fix that problem and share some experience on this issue. Mine has a similar problem. The difference is that it can be charged to 100% but very slow and randomly stop.
Click to expand...
Click to collapse
Yep, that's how my issue started too. It'll progressively get worse.
I've just bought a Google Pixel 3 XL as my 2nd XZP has ceased accepting any charge at all. I'll see if these motherboard sockets fix the issues, then keep one and sell one. Otherwise I'll just sell them both off as parts.
tombow said:
Yep, that's how my issue started too. It'll progressively get worse.
I've just bought a Google Pixel 3 XL as my 2nd XZP has ceased accepting any charge at all. I'll see if these motherboard sockets fix the issues, then keep one and sell one. Otherwise I'll just sell them both off as parts.
Click to expand...
Click to collapse
I talked to some tech on Alibaba (A Chinese shopping website) and they said it can be fixed by replacing that socket. But the replacement requires professional welding equipment and skills. Or the motherboard can be damaged. That's why I am looking for other people's experience before I take step myself. If you succeed, please update this thread. I think there are more people like me who is looking for successful experience from others. Thank you for your sharing.:good: