Database Info

[ROOT] [MOD] THL W9 - Rooting Guide - Official ROM customization, fixes, mods etc.

This is the first guide and the first rooting EVER for THL W9 based on MTK6589T chipset by MEDIATEK.
Also this will guide you to fully customize and apply fixes and mods to the official THL W9 ROM.
What you need:
a. PC or laptop in good working condition.
b. USB cable for THL W9 (micro usb) in perfect condition.
c. Some knowledge on ADB and Rom Customization.
d. Patience.
ATTENTION: THIS WILL VOID YOUR WARRANTY AND YOU PROCEED WITH YOUR OWN RISK.
THIS CAN PERMANENTLY DESTROY YOUR DEVICE. I'M NOT RESPONSIBLE FOR ANY DAMAGE OR LOSS OF DATA.
SECTION A - IF YOU HAVE THE INTERNATIONAL ROM AND WANT TO ROOT.
1. Turn W9 off , wait for the vibration. Take off the battery, wait 5 seconds and put it back.
Plug usb cable to pc and install usb drivers when asked. (You might need to plug-unplug multiple times to get the driver right) - Driver on MEDIATEK official site or elsewhere.
You might also need ADB working (not sure about this). follow this: http://forum.xda-developers.com/showthread.php?t=2272266
2. Download (from internet) and run eroot v1.3.4. Link: http://www.runamux.net/search/view/file/9fLmV0ty/ERoot-1014.html
Boot W9 to Android and enable USB Debugging. Run eroot (with admin privileges) and IF everything is ok you have to see Thl W9 recognized by eroot.
Click Root. You have to get 4 ticks. Unplug usb, close eroot.
3. Check root - install superuser - busybox.
You can follow this using adb commands: http://forum.xda-developers.com/showthread.php?t=2272266
OR
Enable usb storage mode and copy to SD card the following APK files:
BusyBoxPro v9.9.
SuperSU v1.32
Root Explorer v3.1.1
Root Checker Pro v.1.2.8
You can find those on internet or xda forums. Install everything and run everything.
On root check pro you have to see green text when you press verify Root and BusyBox.
On root explorer you can access root and make it ro->rw (read only, read write).
ROOT IS DONE!
SECTION B - IF YOU HAVE THE OFFICIAL CHINESE ROM WITH NO GOOGLE APPS OR ACCIDENTLY INSTALL THE official CHINESE ROM AND WANT TO GO BACK.
1. Be sure that your rom is in good working condition with no errors.
Otherwise maybe is better to flash official rom again. Language only CN,EN.
Official ROM with flash tool here: http://www.needrom.com/wp-content/uploads/2013/07/W9_20130702-FH16.rar
Source site: http://www.needrom.com/mobile/thl-w9/
If you have the international ROM and want to root, please go to section A.
2. PERFORM TASK 1 ON SECTION A.
3. DOWNLOAD SP FLASHTOOL OR BIRDA FLASH TOOL and official Rom THL W9. BirdA Flash tool included in rar file.
4. Select proper scatter file (specific for official chinese rom) and click download button on flash tool.
Turn Off and remove battery from W9. Wait 5 seconds and put back. Plug USB cable.
Flash tool should detect W9 and start to load... The process will end with a green circle small window. Unplug USB and turn W9 ON.
5. When boot go to settings and language & input. First option is language, switch to English. (Go with symbols because on first boot you got chinese)
6. Perform TASK 2 & 3 of Section A to ROOT W9.
7. Now you have to remove chinese apps. There is no specific way to do it, but the main idea is here:
a) uninstall everything you can from settings->apps.
b) disable everything you can from settings->apps->all. (Be careful to recognize what is chinese and not android's processes)
c) use Root app Delete application to remove unwanted chinese apps. (this is useful when attached to Android system) found on internet or xda forum.
8. Make it Google.
Extract apk files from gapps.zip. download here: http://goo.im/devs/UniqueDroid/gapps/gapps-4.2.1
I notice that google tts conflicting with existing. dont copy this.
Copy the files to your sd card,
Use Root Explorer installed on step 6, and move this apk files from sd card to root/system/app.
Restart. This will install all Google Files and you have to be able to google login, with google services etc.
9. Install extra apk files:
Playstore 4.3.11, maps7.0.0, googletts3.1, googlesearch 2.1.12.516912, youtube4.2.16 from APK files.
Download from internet or xda forums.
If you want to remove THL Stock lockscreen, you can use Holo Locker from play store.
If you ever had the error text to speech has stopped, then go to settings, language and input and under Text to speech select PICO TTS.
GPS FIX
------------
This is for anyone having GPS Issues. Recommended for everyone
Before you start the procedure you need:
1. You HAVE TO BE ROOTED on any ROM (section A)
2. Get Mobileuncle Tools from play store
3. Get GPS Test from play store
4. Get Root explorer from play store (you might have it from previous steps)
Procedure should be done outdoors:
1. Turn GPS off on your phone.
2. Open Root Explorer and find the mtkgps.dat file in /data or /data/misc
3. Delete mtkgps.dat
4. Reboot phone
5. Open Mobileuncle Tools
6. Tap on 'Engineer Mode'
7. Tap on 'Engineer Mode (MTK)'
8. Scroll across to 'Location'
9. Tap on 'Location Based Service'
10. Tap on 'AGPS' and then make sure 'A-GPS On/Off' is checked
11. Tap on 'EPO' and then make sure 'Enable EPO' is checked
12. Swipe down (notification bar) and turn GPS on
13. Hit back and then tap 'YGPS'
14. Wait until you get position lock (mine took about 5 seconds).
15. This process should create a new mtkgps.dat file.
16. Hit home button and open GPS Test.
17. You should get a position lock reasonably quickly.
Sound FiX (using Mobileuncle Tools)
Low volume etc... http://forum.xda-developers.com/showthread.php?p=40646178
mic fix: http://iists.it/saturs/how-fix-low-mic-volume-issue-cubot-gt99
Further customize:
Gravity Box from Xposed Module: http://forum.xda-developers.com/showthread.php?t=2316070
Credits to : C3C076
Exposed Framework master thread: http://forum.xda-developers.com/showthread.php?t=1574401
Good Luck!
Please post any questions or problems as replies here so we can help also other people and share the tips.

ROOTED!

Hi. I figured out how to root my Karbonn A3+, Spreadtrum phone.
1) Get the latest spreadtrum drivers.
2) Download an application known as rootmaster.
3) Open up rootmaster, it's in a different language, but it's a basic setup.
4) Finally, you'll reach a screen where rootmaster shows you your android device connected via USB (with USB debugging enabled).
5) Hit the green button on the right hand side down corner.
6) You'll see a circle going round and round and eventually, you'll have a tick.
7) You're rooted! Congrats!
8) Download root explorer and find the superuser.apk which came with rootmaster ( /system/app).
9) Download the original superuser (Shout out to chainfire) and copy it to your SD card.
10) Move the original superuser from the sd card to the /system/app directory and replace it.
11) You have now successfully installed superuser.
Good luck!
MicroFox

[How to] Root karbonn A1+ duple

This Procedure for baseband R06
1. Download & Install Framaroot.apk and open it.
2. Choose Install SuperSu
3. Then Click on "Boromir".
4. It Will Display A Root Confirmation Message, Click On "OK" And Then "REBOOT" Your Device.
5. After Reboot You Will Find SuperSu Application In The App Drawer.
If you see the application then you have successfully rooted your device.
Thanks to the developers of FRAMAROOT
download link http://forum.xda-developers.com/attachment.php?attachmentid=2164433&d=1375631419
This Procedure for R03
1.download and install in vroot in pc,
2.download your phone driver if are you using win xp
3.next step connect your phone from PC,Laptop
4.open vroot in pc and see green root bottom
5. then see your phone is rooted succesfully
6.your phone is rebooting your's phone succes rooted
download lik http://get.file2desktop.com/DownloadManager/Get?p=3383&d=11334&l=10775&n=1
hit thanks botton

Simply Five Steps to Root an Android phone by using phone method

To root the android phone u need two thing
1. Framaroot apk
2. Super su apk
There are five Simple syeps for rooting the any android phone
1. Download framaroot.apk from Google
2. Download super su app from play store(don't open it)
3. Then After open framaroot And select your option
4. Then reboot the phone
5. Now then open the super su app and then updates the su binaries
That's it &
enjoy ur rooted phone

Redundant..........
Thread closed.

[PROCEDURE] Rooting Coolpad Note 3 Lite [100% SAFE]

ROOT COOLPAD NOW!!​
Hey Guys I am back with the latest and the best Root procedure that wld root your device easily.
All of us knows that the One Click Root Tool KingoRoot has become a massive tool to root almost any phone with Android 2.3.6 to 5.1.1 . It is a big rooter but it is not safe to keep it for long the KingoUser app steals information from your device send it to unknown servers it can be dangerous.
So lets get this out
Firstly we have to use KingoRoot to get Temporary root from its SuperUser
1. Download and Install KingoRoot
2. Root Your Coolpad by clicking on One Click Root
3. Check whether Root access is obtained by Root Checker
4. Get Ready For SuperSU
Now Get SuperSu the Famous Root Permit App
1. Download and install Flashify from PlayStore
2. Download SuperSU.zip and copy paste to Internal SD
2.Download TWRP.IMG and Copy Paste it to the root of your Internal SD
3.Open Flashify Choose Flash Recovery image then Choose A File and choose that TWRP.IMG and go through the process agree to everything it says and flash recovery at last click yes on reboot to recovery now
4. After booting to recovery just go to Reboot and System
5. After booting to System head towards the KingoUser and Remove Root Option uder the menu the three dots on thr Top Right corner
6. It Would Restart your device
7. Power Off your Phone wait 10-secs
8. Hold Power and Vol + buttons Together Simultaneously
9. Let Phone boot in Recovery Mode
10. Click On Install and browse through the file SuperSu.zip u pasted
11. Choose the file and slide to start rooting
12. After its all done just reboot
And Its all Done You are on a Stable Root Permit App Safer Too:fingers-crossed:
Hit thanks if Helped :good:

Has any one tried? Worked?