Database Info

Problems installing a cfw for the first time (xperia x8)

Hello,
I recently acquired a Xperia X8 and tried to install a CFW, but i have some issues
So far, as i understood, i'm on android 2.1 root, using xrecovery, my baseband is 015, build 2.1.1.A.0.16, the cell is the international version ( not the american one ).
I tried to install FroyoBread v023b and i also tried the GingerDX v017, following closely the guides, and no matter what i try, i end up always stucked at the logo ( either froyobread or i don't remember what is written on the second one ). My x8 simply freeze at these logos, and i finally go again to the xrecovery menu, restoring my backup and am still on 2.1 root.
If anyone have an idea of where i did wrong and how to make me install finally one of these roms, it'd be really nice =)
Thanks

reply
hy my friend.i have also xperia x8 and after i lnstalled xrecovery,i installed cyanogen mode 7 and everything were ok.....try to install this first and then install gigner dx....i hope this helps u!!!!

well, it worth a try ^^ if i can ask you the link of cyanogen mode 7 you used please ^^

I tried to install a CFW too, i'm on android 2.1 Rooted and xRecovery installed , my baseband is 015, build 2.1.1.A.0.16,
I tried to install the GingerDX v017, I install rom manager and when I try to install CWM there is not X8 on phone list.
I sucesfully install Fdxperience with xrecovery and restore to 2.1...
Help me with Rom manager, CWM and GingerDX v017please!
Thanks!

Well, i tried to redownload the rom and install it in case i could have a problem with the file i downloaded ( i doubted of it but who knows u_u ), same problem. i still am freezing at the froyobread logo
- Edit -
I tried just now with another rom, installed using the recovery system, and weirdly, its the same, i freeze at the logo Hackdroid this time...

If I install GingerDX v13 with xrecovery, is it possible to upgrade it to v17 without CWM?

Iwo66 said:
If I install GingerDX v13 with xrecovery, is it possible to upgrade it to v17 without CWM?
Click to expand...
Click to collapse
man, nothing personal, but could you create your own thread for your problem please ^^it'll avoid this one to become messy
i rather keeping my thread clean, i won't be able to help you and am myself in need of help
thank you for your understanding =)

Ok, sorry!

Trefle said:
well, it worth a try ^^ if i can ask you the link of cyanogen mode 7 you used please ^^
Click to expand...
Click to collapse
take a look here.... android-xperiax8.blogspot.com/2011/06/rom-froyobread-by-doixanh.html

ok i found out the problem... it was the µSD that was causing issues... i removed it, i booted... then i partitionned it a second time ( maybe the ext 2 part was a bit too big and made crash the FW first launch, who knows )
- Closed -

[Q] Problems installing Custom ROM on Huawei u8160 (Vodafone 858)

As the title says i have problems installing custom rom on my android phone.
First time i installed a custom rom was 4 months ago and at that time, it worked ! I installed CM7 and it worked with a few small bugs but now i found a better version of cm7 and i tried to install serveral times and it didn't worked.
The custom rom i tried to install was this: http://forum.xda-developers.com/showthread.php?t=1554530
What steps i followed:
1. I rooted the phone with superoneclick v2.3.3 and it was ok
2. I installed ClockWork Recovery from android market and flash recovery (v5.0.2.8)
3. I selected a custom rom to install and until here it was fine.
So, the phone has rebooted himself and the installing of cm7 began ...
And from here start the problem: After installing, on the screen remains the writing ANDROID like in the picture from the attachement. (the picture is made in paint)
So what is the problem,what i've done wrong ?
This is not the first time i install a custom rom,i know how to install but i don't know what is the problem now ...
Sorry if i posted in the wrong section,but i'm new here
Thank you in advice

can someone help me please, i really need to update android !

no one ?!

i need help with this,i can't figure out why is not working ...

nevermind,i solved myself
you can close this topic.

Urgent help needed to fix a error

Hi Devs,
I had installed ateeq's rom 3.1 used it for 2-3 days after which i started getting a strange error when i open camera or camcorder
on ateeq's rom the apps i mentioned automatically close and when i tried installing cynogenmod9.1 build 11 and 14 it gives me the following error
"Cant connect to camera"
I need urgent help on this issue as i use camera a lot
any suggestions or fixes are most welcome
thanks:crying:
and i have tried removing the battery and restarting,
going to recovery wiping everything possible excluding sd card and flashing various rom's , but the problem seems to exists

If you have already tried flashing other roms after complete wipe , then it may be a hardware problem.
Sent from a ©Holofied Thing™

harshal.n.karandikar said:
Hi Devs,
I had installed ateeq's rom 3.1 used it for 2-3 days after which i started getting a strange error when i open camera or camcorder
on ateeq's rom the apps i mentioned automatically close and when i tried installing cynogenmod9.1 build 11 and 14 it gives me the following error
"Cant connect to camera"
I need urgent help on this issue as i use camera a lot
any suggestions or fixes are most welcome
thanks:crying:
and i have tried removing the battery and restarting,
going to recovery wiping everything possible excluding sd card and flashing various rom's , but the problem seems to exists
Click to expand...
Click to collapse
I faced this problema couple of times too...I would recommend you to use a camera app from app store.The Camera bug is present in many ROMs.Even in CM10 beta #5 which is almost stable has a bug in camera...I use Camera Zoom FX for now..it will give you good quality picture plus better editing options.

[Q] Need help restoring Jiayu G3 to factory ROM 4.0.4

Hello!
I am a complete noob on this topic, but I somehow thought it would be smart to try and update my Jiayu G3 to Jelly Bean (4.1.2?). I followed a tutorial on Youtube and it worked. However, after installing it, I had no wifi/bluetooth. So after a while trying to get it turned on I thought, whatever, I don't need jelly bean anyway. I reset the phone to factory default not realizing it kept the same version.
I turned it off, then hopped into CWM Recovery and installed a 4.0.4 ROM. Still no wifi/bluetooth. I then downloaded the original version from the Jiayu website corresponding with my phone version (20121129-082828), but using it in CWM is giving me an error:
assert failed: getprop("ro.board.platform") == "MT77_H958_ICS" ||
E:Error in /sdcard/update.zip
(status 7)
Installation aborted.
I read somewhere that you have to use the original update tool or something? I tried using the app thats standard on the phone. Same thing, I press update, it reboots and goes into CWM but then says something like cannot find update.zip on ...
Please tell me if I need to give more details about my phone or what ROM I should use.
Thanks in advance,
xSteun.
EDIT:
I fixed it!
I used the Jiayu G3N ROM from needrom.com and I'm using 4.1.2 Jelly Bean. Wifi and Bluetooth are working.

Jiayu G3 custom ROM
xSteun said:
Hello!
I am a complete noob on this topic, but I somehow thought it would be smart to try and update my Jiayu G3 to Jelly Bean (4.1.2?). I followed a tutorial on Youtube and it worked. However, after installing it, I had no wifi/bluetooth. So after a while trying to get it turned on I thought, whatever, I don't need jelly bean anyway. I reset the phone to factory default not realizing it kept the same version.
I turned it off, then hopped into CWM Recovery and installed a 4.0.4 ROM. Still no wifi/bluetooth. I then downloaded the original version from the Jiayu website corresponding with my phone version (20121129-082828), but using it in CWM is giving me an error:
assert failed: getprop("ro.board.platform") == "MT77_H958_ICS" ||
E:Error in /sdcard/update.zip
(status 7)
Installation aborted.
I read somewhere that you have to use the original update tool or something? I tried using the app thats standard on the phone. Same thing, I press update, it reboots and goes into CWM but then says something like cannot find update.zip on ...
Please tell me if I need to give more details about my phone or what ROM I should use.
Thanks in advance,
xSteun.
EDIT:
I fixed it!
I used the Jiayu G3N ROM from needrom.com and I'm using 4.1.2 Jelly Bean. Wifi and Bluetooth are working.
Click to expand...
Click to collapse
I am facing exactly the same issue, I need to go back to original ROM as the custom ROMs I tried are not allowing me to encrypt the phone which is a requirement for me to access office email. I have tried GThrill ROM, and Lewa ROMs 4.1.2, though both of them are very good, except for minor issues. Can you please provide the link for Jiayu G3N ROM that worked for you, and if you are seeing any other issues, I would like to try that.
Thanks,
Adit

aditk said:
I am facing exactly the same issue, I need to go back to original ROM as the custom ROMs I tried are not allowing me to encrypt the phone which is a requirement for me to access office email. I have tried GThrill ROM, and Lewa ROMs 4.1.2, though both of them are very good, except for minor issues. Can you please provide the link for Jiayu G3N ROM that worked for you, and if you are seeing any other issues, I would like to try that.
Thanks,
Adit
Click to expand...
Click to collapse
Sure!
I'm not allowed to post links, but I will PM it too you.
That one worked for me. I hope it works for you too.
Sorry for my late reply.

xSteun said:
Sure!
I'm not allowed to post links, but I will PM it too you.
That one worked for me. I hope it works for you too.
Sorry for my late reply.
Click to expand...
Click to collapse
Can you also sent to me, please?

xSteun said:
Hello!
I am a complete noob on this topic, but I somehow thought it would be smart to try and update my Jiayu G3 to Jelly Bean (4.1.2?). I followed a tutorial on Youtube and it worked. However, after installing it, I had no wifi/bluetooth. So after a while trying to get it turned on I thought, whatever, I don't need jelly bean anyway. I reset the phone to factory default not realizing it kept the same version.
I turned it off, then hopped into CWM Recovery and installed a 4.0.4 ROM. Still no wifi/bluetooth. I then downloaded the original version from the Jiayu website corresponding with my phone version (20121129-082828), but using it in CWM is giving me an error:
assert failed: getprop("ro.board.platform") == "MT77_H958_ICS" ||
E:Error in /sdcard/update.zip
(status 7)
Installation aborted.
I read somewhere that you have to use the original update tool or something? I tried using the app thats standard on the phone. Same thing, I press update, it reboots and goes into CWM but then says something like cannot find update.zip on ...
Please tell me if I need to give more details about my phone or what ROM I should use.
Thanks in advance,
xSteun.
EDIT:
I fixed it!
I used the Jiayu G3N ROM from needrom.com and I'm using 4.1.2 Jelly Bean. Wifi and Bluetooth are working.
Click to expand...
Click to collapse
Have the same problem. Could you send me a link for ROM that work for you.
Thanks

Successful Installation of Xposed on Samsung Galaxy SM-J200G/DD

Hello Guys!!
After many unsuccessful attempts to install the latest Xposed framework , downloaded from XDA, on my Samsung Galaxy SM-J200G/DD, lollipop V5.1.1 rooted stock ROM, today I have installed the complete framework without any issues and errors.
A big thanks to Marco V. Ponciano for his great working video tutorial and the files provided. :good:
Downloaded the whole set of files and voila !! DONE. If any of you guys having problem in installing the framework and having issues of bootloop after installation then you may follow his link.
Due to restrictions I cannot give the direct link in this post but sure you can find this guy in google search. If anyone needs the files then message/comment here. I will surely help.
Thanks
Regards.

Getting bootloop?

Boot loop

yes boot loop

There is nothing special in successfuly installing xposed in J200G. Just flash the custom wanam xposed zip file via twrp and it's done.

Fail?
So I did try to use wanam xposed. I installed it successfully, but when I try to use NCB1 - it crashed, GravityBox change on notification background - nothing happened. And especially when I soft reboot after changing grravitybox I caught a FRP Lock. Any solution?

After installing xposed front camera crashes

:good:
kabira_rc said:
Hello Guys!!
After many unsuccessful attempts to install the latest Xposed framework , downloaded from XDA, on my Samsung Galaxy SM-J200G/DD, lollipop V5.1.1 rooted stock ROM, today I have installed the complete framework without any issues and errors.
A big thanks to Marco V. Ponciano for his great working video tutorial and the files provided. :good:
Downloaded the whole set of files and voila !! DONE. If any of you guys having problem in installing the framework and having issues of bootloop after installation then you may follow his link.
Due to restrictions I cannot give the direct link in this post but sure you can find this guy in google search. If anyone needs the files then message/comment here. I will surely help.
Thanks
Regards.
Click to expand...
Click to collapse