Help in restoring baseband and imei no. - General Questions and Answers

i recently flashed a rom on micromax canvas 2 plus and the baseband went unknown and imei no. was lost . now i can't do anything about it . i have flashed stock rom many times. went into mtk engineering mode but when clicked the send command option , it gave me an error "can't send
" something like that. what should i do now ??

Related

[Q] Zte v987 bricked, how to fix.

First of all, hello.
Second, let me explain the problem:
I accidentally soft - bricked my ZTE V987.
That would not be a problem if I didn't also lose my ROM backup.:crying:
What I did so far while trying to fix it:
1. Tried to re - install Bruno's CWM recovery through SP flash tool - was unable to. SP flash tool enable dram fail error.
2. Found out I needed a preloader.bin, found one that worked (have found few preloader.bin files for v987 but all failed to flash except one) - flashed that.
3. Tried Cwm again - success.
4. Instaled Bruno's 3.0 mod rom through CWM, success, but lost Baseband, IMEI, Serial Number, BT and WIFI MAC Address.
5. Tried installing zte v987 china stock 1.0.1 rom through cwm - success, have baseband, but no IMEI, no Serial Number, BT and WIFI MAC Address.
6. Found about sn write tool, used it to restore IMEI and WIFI MAC address - success, BT & SN - fail: SN says it is written yet it is always displayed as 0123456789ABCDEF, but BT MAC sn write tool always fails with BT DB write fail error.
So, from what I managed to figure out, I need either a full ROM Dump from a working ZTE 987, and a way to insert all these numbers back in, or any other way to fix my phone.
To anyone willing to help, thanks in advance, and if this thread is in wrong subforum I am very sorry.
v987 bricke to
hello
I have the same probleme with no sim detection, I trie to restore with this tuto http://forum.xda-developers.com/showthread.php?t=2461059 but I have no baseband no imei ... but wifi ok and BT ok
where have you find "zte v987 china stock 1.0.1 rom" ? i have find only update.
thank for your reply
and sorry for my english
Patrick
Flash with stock firmware. It will 100% working.
Sent from Xda Premium 4
hello amit9734
i am sorry but i dont have stock firmware
Where I can find it ?
thanck
V987 IMEI invalid
I have a very similar problem; V987 showing invalid IMEI numbers but WiFi, BT etc all working. SN shown as 123456789ABCDEF. Phone does not recognise the Engineering mode code or offer an option to enter it via Gravity box. I can't get the IMEI & SN Writer tool to recognise the phone.
I have another V987 with stock ROM - does anybody know how to dump the ROM so I can copy it to my other phone?
(The links to the stock ROM on Bruno's thread do not work)
Edit: Problem solved! I used MTK tools to make a NVRAM dump of the stock ROM then the Flash tool to copy the ROM to my old phone. The strange thing is that the phone remembered the correct IMEI and SN numbers. I now have two fully working V987's!
ChiPhoneUser said:
I have a very similar problem; V987 showing invalid IMEI numbers but WiFi, BT etc all working. SN shown as 123456789ABCDEF. Phone does not recognise the Engineering mode code or offer an option to enter it via Gravity box. I can't get the IMEI & SN Writer tool to recognise the phone.
I have another V987 with stock ROM - does anybody know how to dump the ROM so I can copy it to my other phone?
(The links to the stock ROM on Bruno's thread do not work)
Edit: Problem solved! I used MTK tools to make a NVRAM dump of the stock ROM then the Flash tool to copy the ROM to my old phone. The strange thing is that the phone remembered the correct IMEI and SN numbers. I now have two fully working V987's!
Click to expand...
Click to collapse
ok thank I just have to find another V987
Ziko_Tamburash said:
First of all, hello.
Second, let me explain the problem:
I accidentally soft - bricked my ZTE V987.
That would not be a problem if I didn't also lose my ROM backup.:crying:
What I did so far while trying to fix it:
1. Tried to re - install Bruno's CWM recovery through SP flash tool - was unable to. SP flash tool enable dram fail error.
2. Found out I needed a preloader.bin, found one that worked (have found few preloader.bin files for v987 but all failed to flash except one) - flashed that.
3. Tried Cwm again - success.
4. Instaled Bruno's 3.0 mod rom through CWM, success, but lost Baseband, IMEI, Serial Number, BT and WIFI MAC Address.
5. Tried installing zte v987 china stock 1.0.1 rom through cwm - success, have baseband, but no IMEI, no Serial Number, BT and WIFI MAC Address.
6. Found about sn write tool, used it to restore IMEI and WIFI MAC address - success, BT & SN - fail: SN says it is written yet it is always displayed as 0123456789ABCDEF, but BT MAC sn write tool always fails with BT DB write fail error.
So, from what I managed to figure out, I need either a full ROM Dump from a working ZTE 987, and a way to insert all these numbers back in, or any other way to fix my phone.
To anyone willing to help, thanks in advance, and if this thread is in wrong subforum I am very sorry.
Click to expand...
Click to collapse
Hello! I have a question! How did you complete step 2? I still have my V987 bricked and I can't seem to find an appropriate preloader.bin to wake it up again. I know I'm not exactly helping you, but I would be so grateful if you can help me out with that! I have less than 5 hours with this new ZTE and I already messed it up

[Solved by my self ][Q] no radio, no imei, no baseband

plzz hellpp...!!
i flashed custom rom using cwm recovery...
it has been flashed successfully but my cell shows no sim card !!
i tried lot of methods of this site...
but i cant switch on radio of my phone and cant recover my imei...
plz show me the method to switch on radio of my phone...
i know the method to recover my imei using engineering mode but it dont send to command because my radio is off...
engineering mode shows the " radio off "
so plz tell the method to switch it on...
i have micromax A63 ( mtk 6572 )
thanks..!!
Hello. I saw this. And I'm wondering will this work for s4 clone. And what ROM did u use and how after u flashed it did u fix imei etc
Ya..i fixed all the things..baseband...wifi...and imei too...!!
dali786546 said:
Hello. I saw this. And I'm wondering will this work for s4 clone. And what ROM did u use and how after u flashed it did u fix imei etc
Click to expand...
Click to collapse
Try the 2nd option of this post
http://forum.xda-developers.com/showthread.php?p=49196336

unknown baseband, invalid imei dont know what to do

this my first post on this site i was referred here by my friend he said i would get the solution here. so after installing cwm recovery my phone signal was gone i am rooted i have tried engineering mode but ended up <... was not send>. pls help

Galaxy Note 2- Lost IMEI After Flashing Dr. Ketan's ROM

IMEI problem
ive samsung glxy note 2 (indian pics) recently i have been rooted nd apply Dr.ketan's rom file bt unfortunetly i had lost my imei no. i hv been seen that 'not registered on network'.....many times i hv been tried bt afterall i should hv to again register my imei with paid some money......i tried to again install stoke rom, agin install custom rom, change many roms, reset, dr.mobile tools etc bt all tricks are failed ......give me right sugsn 4 solve it.........
chiraggauswami said:
ive samsung glxy note 2 (indian pics) recently i have been rooted nd apply Dr.ketan's rom file bt unfortunetly i had lost my imei no. i hv been seen that 'not registered on network'.....many times i hv been tried bt afterall i should hv to again register my imei with paid some money......i tried to again install stoke rom, agin install custom rom, change many roms, reset, dr.mobile tools etc bt all tricks are failed ......give me right sugsn 4 solve it.........
Click to expand...
Click to collapse
What do you mean you have lost your IMEI number? What is the specific error you are getting? Not registered on network usually has to do with your SIM or ICCID.

How Change my Galaxy J7(SM-J700F) IMEI ?!!

Im installed a custom rom (CM13 6.0) For My Galaxy J7 (SM-J700F) After that my IMEI had changed and i can't use my netword and calls again .
how i restore my old IMEI again ?!
I think if you flash the stock rom your old imei will be back
If possible Plz Find another J7 which have custom recovery and backup his efs than put it folder from his phone to ur phone In backup folder than restore it...
I think its backur network....
Note: Do it first before Flash any rom... Backup all files with twrp
Same Problem here
Hi I'm using the Galaxy J700H phone its like 2mos old, and have the exact same problem, so please can someone help? My problem is, I think also is my IMEI number? When i dialed *#06# on my phone my IMEI is 350000000006 and FTW that's not even my IMEI anymore, I have the original IMEI number here backed up but i tried everything, step by step. But sadly nothing worked out. I used this sim card in all of my phones and lastly when i wiped out my phone and flashed custom rom in it, then this happened, then i decided to flash the stock rom that has been downloaded from the sammbobile.com website, after that nothing happened. My phone always displays EMERGENCY CALLS ONLY.. pls help

Categories

Resources