Hi, I flashed my galaxy i9003 to official ROM 2.3.6 Gingerbread.
It worked for a few weeks and then suddenly when I use the internet (using data nerwork not wifi) for like 2 minutes the reception gives me no signal!
If I connect my phone to my PC using tethering or even just charging it on the PC it works fine and doesnt give me no signal
Why is that? I don't think the problem is with my SIM because I tried it on a different device and it works fine
Is it because something went wrong after flashing?
Any help please?
Thanks
try to flash first stock 2.3.4 then 2.3.6, try DDLF2 for 2.3.6 its the best stock rom I used any time.
tranceformat said:
try to flash first stock 2.3.4 then 2.3.6, try DDLF2 for 2.3.6 its the best stock rom I used any time.
Click to expand...
Click to collapse
My phone's stock was 2.2 so I flash back to stock rom than back to 2.3.6? and does the DDLF2 support Arabic keyboard?
Ryomasan said:
My phone's stock was 2.2 so I flash back to stock rom than back to 2.3.6? and does the DDLF2 support Arabic keyboard?
Click to expand...
Click to collapse
No you can flash any stock you want, 2.2 or 2.3.4 or 2.3.5. But I recomend to flash 2.3.4. About arabic keyboard, it should support. The diference in DDLF and XXLE4 for example I didnt saw in language, just performance
Related
What the different flash stock rom from dkp9 to xxkpq or ddkp3 without flash from xxkpe..
Or custom rom(dxkp9) to ddkp3 stock rom without by procedure..
I alwy skip flash rom..
Example: from dxkp9 to xxkpq wihout use pit start from xxkpq.
Later i try froyo to ddkp3 stock rom..
what are you trying to say???
RonnYap said:
What the different flash stock rom from dkp9 to xxkpq or ddkp3 without flash from xxkpe..
Or custom rom(dxkp9) to ddkp3 stock rom without by procedure..
I alwy skip flash rom..
Example: from dxkp9 to xxkpq wihout use pit start from xxkpq.
Later i try froyo to ddkp3 stock rom..
Click to expand...
Click to collapse
He's asking wads the difference between flashing dxkp9 over xxkpq or ddkp3 over xxkpq without flashing to xxkpe first
Cheers
Sent from my GT-i9003 powered by MIUI
prayush12 said:
what are you trying to say???
Click to expand...
Click to collapse
Just study its working from froyo rom straight flash to gingerbread without flash from xxkpe to xxkpq or ddkp3..
Result: work fine..no need use pit from gingerbread
But for the battery performance i not sure coz some user say if flash from the beginning like xxkpe to ddkp3 or xxkpq is better then straight flash to ddkp3 or xxkpq.(that i trying to say)
Sorry my english bad.. (chinese educate)
garzelli said:
KPQ 4 files:
CODE_I9003XXKPQ_CL709629_REV08_user_low_ship.tar.md5
APBOOT_I9003XXKPQ_CL709629_REV08_user_low_ship.tar.md5
MODEM_I9003XXKPQ_REV_00_CL1076353.tar.md5
GT-I9003-CSC-SERKPQ.tar.md5
Click to expand...
Click to collapse
Try this Express install KPQ- no need to begin from KPE ;p
http://forum.xda-developers.com/showpost.php?p=22486948&postcount=213
Currently i had flashed this fw -no problem
But need one-or-more sr members to comfirmed it
thanks for garzelli for link
if u had never flash any ROM with ODIN before, just try to check latest firmware update from KIES...
it's official from samsung...,
good advice ideally, but you haven't been here long enough (or just haven't read enough) to have seen the nightmares kies usually causes
bad english xD
if i understand you:
every mobile phone has got another build number
every buildnumber needs (normaly) her own rom
somebody help i updated my galaxy 3 from eclair to froyo thru odin yesterday.....now im not able to use data connection ....wifi to doesnt work....
the firmware i updated to is DDJp2....
apknocks said:
somebody help i updated my galaxy 3 from eclair to froyo thru odin yesterday.....now im not able to use data connection ....wifi to doesnt work....
the firmware i updated to is DDJp2....
Click to expand...
Click to collapse
Instead of JP2 flash some custom Kernel like Kyrillos v 9.5 or Kyorarom. Very stable and good. Use a non oc kernel(or if u want and OC kernel) and things should be fine.
Else just try flashing a custom kernel. Maybe it would solve your issue.
apknocks said:
somebody help i updated my galaxy 3 from eclair to froyo thru odin yesterday.....now im not able to use data connection ....wifi to doesnt work....
the firmware i updated to is DDJp2....
Click to expand...
Click to collapse
just try and flash DDJP6 one....itll do just fine...
can u send me the link for ddjp6 firmware
hi i have a problem with my lg optimus 3d
well i installed a rom
how i did it? installed it from rom manager via cwm
my phone is rooted but not flased
so now when i open my phone its has no signal
You probably installed a rom that is not compatible with your baseband. Which rom did you install?
dsmboost said:
You probably installed a rom that is not compatible with your baseband. Which rom did you install?
Click to expand...
Click to collapse
CyanogenMod 7.2+ v0.2 beta full :/
That is a GB rom. What baseband is on your phone? Go in to settings > about phone and check software version.
dsmboost said:
That is a GB rom. What baseband is on your phone? Go in to settings > about phone and check software version.
Click to expand...
Click to collapse
lgp920-v10k-sep-17-2011 this?
dionisisdns said:
lgp920-v10k-sep-17-2011 this?
Click to expand...
Click to collapse
Yup, v10k is the baseband. v10k is a froyo baseband. That is why you have no signal. You need to flash a gingerbread baseband if you want Cyanogenmod to work. You can search around the forums for that. Otherwise, you need to flash back to any froyo rom to get your signal back.
Hi same thing happened me install the O3D ThiaiZ ThiaiZ GB v2.7.1 and does not give me no signal and can install the default passes brings froyo, someone who knows how to change the baseband can help me?
you can fix this by flashlight the GB baseband. do a simple reach here, you wont miss it.
Sent from my LG-P920 using xda premium
dionisisdns said:
CyanogenMod 7.2+ v0.2 beta full :/
Click to expand...
Click to collapse
Download the preparation kit from the rom. It has all the instructions to flash just the baseband and leave the rom intact.
hi guys.
I have problems when installing certain custom ROMS using CWM acording to the Baseband used.
Don't Know why, but when I wanted to install VURRUT KPU again (i had done it several times) Screen keeps on the first image of SAMSUNG SCL I9003 and nothing happens.
I tried to use another custom ROM based on LF2, and when I install it via CWM, it does the same thing, the only difference is that the phone reboots and comes back again to the same SAMSUNG screen.
My phone is galaxy SCL I9003L but i've never had problems installing those ROMs.. It's very strange.
Please if someone could explain me if there is a reason why it's happening this, tell me, i'm a bit scared, using Stock FROYO I9003LUBKB1.
Thanks
Because your'e still in FROYO. Upgrade it first to gingerbread. See my post. General Guide for noobies.
marshygeek said:
Because your'e still in FROYO. Upgrade it first to gingerbread. See my post. General Guide for noobies.
Click to expand...
Click to collapse
i've been in froyo, GB , ICS and JB.. i know how to flash roms and pass from one to other..
But my problem is when I try to Install VURRUT KPU or MASTER ROM LF2..
I had used VURRUT's before with no problems, but not now, and that is my problem.. I don't know why
acu.tm said:
i've been in froyo, GB , ICS and JB.. i know how to flash roms and pass from one to other..
But my problem is when I try to Install VURRUT KPU or MASTER ROM LF2..
I had used VURRUT's before with no problems, but not now, and that is my problem.. I don't know why
Click to expand...
Click to collapse
Oh so ur phone is i9003L!
I think u can try the qwerty Rom, as far as I remember once LoSco (rom dev) told that his rom can also be used for Argentine version of SL i.e; Galaxy SL i9003L.
To confirm, just ask in that thread once then go for flashing it if he says yes.
Hope this helps u.
Sent from my GT-I9003.
Try to do the kpe-pit procedure and clean install vurruts rom
Sent from my GT-I9003 using xda app-developers app
Where do I get the ICS Stock Rom, SGH-I927_ATT_I927UCLJ3_I927ATTLJ3_I927UCLJ3.tar.md5? or the gingerbread stock rom?
Before you say Google or use another search engine, I have tried. Got hits. But the download file does not exist anymore.
I did find the rogers gingerbread one on samsung-update. So I can flash back to rogers.
jloh1963 said:
Where do I get the ICS Stock Rom, SGH-I927_ATT_I927UCLJ3_I927ATTLJ3_I927UCLJ3.tar.md5? or the gingerbread stock rom?
Before you say Google or use another search engine, I have tried. Got hits. But the download file does not exist anymore.
I did find the rogers gingerbread one on samsung-update. So I can flash back to rogers.
Click to expand...
Click to collapse
CLICK ME
Thank you!