And how do I make sure i don't have SuperCID mod done so I can go back to stock.
At&t CID is CWS__001. To find out your current CID issue the following fastboot command:
fastboot oem readcid
Sent from my Evita
timmaaa said:
At&t CID is CWS__001. To find out your current CID issue the following fastboot command:
fastboot oem readcid
Sent from my Evita
Click to expand...
Click to collapse
My CID is currently HTC_061 for an AT&T One X with hboot 1.14 s-on
Something I did must have messed with that. Is my best bet at this time to SuperCID, S-Off, flash .ruu to go back to stock?
Yep, that sounds right to me. SuperCID, s-off, RUU.
Sent from my Evita
Related
ok well i had a problem where my speaker was not working and so i restored everything to stock. using http://forum.xda-developers.com/showthread.php?t=2168578&highlight=reset+unlock+flag, ruu and s on.. after fixing my speaker i successfully unlocked and rooted and used x_factor for cid.. the cid is 11111111 in cid getter and when checked in fast boot. but the problem is there is no cid printed in boot loader. absolutely no trace of it. there is no line in the boot loader am i missing something? and secondly im unable to s off.
If your familiar with adb,fastboot? In fastboot command prompt type
fastboot oem rebootRUU
fastboot oem writecid 11111111
Sent from my HOX w/CM10.1 4.2.2 s-off
subarudroid said:
If your familiar with adb,fastboot? In fastboot command prompt type
fastboot oem rebootRUU
fastboot oem writecid 11111111
Sent from my HOX w/CM10.1 4.2.2 s-off
Click to expand...
Click to collapse
Won't work unless he's s-off
Sent from my VENOMized HoxL
Can't speak for myself, perhaps I'm misunderstanding this post?
http://forum.xda-developers.com/showthread.php?p=38223598
[S-Off] Facepalm S-Off for HTC One XL
Sent from my HOX w/CM10.1 4.2.2 s-off
"Fastboot getvar cid" This will tell you what your cid currently is.
Sent from Xparent Red using my Venomized Evita
area51avenger said:
Won't work unless he's s-off
Sent from my VENOMized HoxL
Click to expand...
Click to collapse
Many users, including myself used this method to obtain supercid prior to gaining soff. Although you don't need the fastboot oem rebootRUU line first.
Sent from my One X using xda premium
Here is the error that i get when i issue the commands
fastboot oem rebootRUU
fastboot oem writecid 11111111
FAILED (status read failed (Too many links))
and this is the same error that i get when i try to s off. and when i use the use the command fastboot getvar cid it returns with cid: 11111111. Basically when i used this http://forum.xda-developers.com/showthread.php?t=2168578&highlight=reset+unlock+flag my cid disappeared from boot loader. The last time i s offed i didnt have any error.
so what might be wrong? on the other side im not a guy but a girl..
FAILED (status read failed (Too many links)) is a common error on the evita, i always ignore it since it never caused any problems for me ever. cid only shows up in bootloader if you are s-off. but if phone works fine who cares if it shows the cid. if you truely want to go back to stock and start if possible you this method [2.20 Firmware] Remove Pesky root it is a pseudo joke thread but the method works.
Stumpy said you don't have to fastboot oemRUU.
Just do the writecid command in boot loader?
[Edit] notice you said all ready 11111111cid. Make sure your binaries are all up to date.
Sent from my HOX w/CM10.1 4.2.2 s-off
hello every one I was able to s off. didnt do any changes apart from installing busybox. so any1 struggling out there should definitely try installing busybox before s off..
I have been trying to run a RUU to unroot the phone before I bring it in for a repair. I keep getting the 155 error and I searched through google for help on the error. I have read a few post about it but nothing works. I tried to run it through fastboot as well and that does not work. My phone information while in bootloader is Evita pvt ship s-on rl hboot 1.09.0000 radio .17.32.09.12 and I am running cleanrom v 6.5 as my rom. Since my rom and boot.img is based of 3.18 I tried to run the ruu on 3.18. Im not sure if its because it is an older verdion of bootloader while im running a rom that is based off the 3.18. So I also tried to flash a older rom and run the ruu for 1.73 but that didnt work either. Im stumped and very frustrated so please I need your help.
Could you post the download link for the RUU? Just wanna make sure you go the right one.
Sent from my HTC One XL using xda premium
Arrow44 said:
Could you post the download link for the RUU? Just wanna make sure you go the right one.
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
Yeah for the 3.18 its http://bugsylawson.com/HTCFiles/Evi....24p.32.09.06_10.130.32.34_release_signed.exe
and for the 1.73 its http://www.ponack.net/designgears/b...73.502.2_2FE6772699D8596307CC997452BB8D25.exe
Also I read that in order to use the RUU correct I need to soff the phone, but then I cant upgrade the firmware to jellybean. Do you know if this is correct?
The phone will brick if you try to ruu or update to 3.18 while S-ON and superCID. Your CID right now, no doubt is 11111111. When the RUU runs it checks to see what your CID is, if it's not what it should be, it gives an error. If you change your CID back to CWS__001 you can run the 1.73 RUU but you can never update to 3.18 unless you S-OFF first or you'll brick.
to check your CID fastboot oem readcid.
You can change it once without S-OFF with fastboot oem writecid CWS__001 but you can't change it again with that command unless you're S-OFF
Arrow44 said:
Could you post the download link for the RUU? Just wanna make sure you go the right one.
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
exad said:
The phone will brick if you try to ruu or update to 3.18 while S-ON and superCID. Your CID right now, no doubt is 11111111. When the RUU runs it checks to see what your CID is, if it's not what it should be, it gives an error. If you change your CID back to CWS__001 you can run the 1.73 RUU but you can never update to 3.18 unless you S-OFF first or you'll brick.
to check your CID fastboot oem readcid.
You can change it once without S-OFF with fastboot oem writecid CWS__001 but you can't change it again with that command unless you're S-OFF
Click to expand...
Click to collapse
Ok thanks. Im in the process of doing the S-OFF right now. What I want to do is get rid of the red text and make my phone look like the bootloader is locked and never tampered with. I remember doing this with my EVOLTE so it will look like the phone is S-ON and locked. After all that run the RUU for 2.20 so it can get repaired. Now after the repair I can root again and upgrade to the Jellybean firmware right?
cables2590 said:
Ok thanks. Im in the process of doing the S-OFF right now. What I want to do is get rid of the red text and make my phone look like the bootloader is locked and never tampered with. I remember doing this with my EVOLTE so it will look like the phone is S-ON and locked. After all that run the RUU for 2.20 so it can get repaired. Now after the repair I can root again and upgrade to the Jellybean firmware right?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2156368
Is it possible to do a JB RUU after i just superCID and S-OFF? Because i wanna go back to stock.
Yes,but don't use the OTA RUU or you will brick your phone
yooouuri said:
Is it possible to do a JB RUU after i just superCID and S-OFF? Because i wanna go back to stock.
Click to expand...
Click to collapse
You can use any ruu while s-OFF, just simply plug phone to computer and run ruu. No need to relock bootloader.
For the supercid, it is recommended to change it back to original with fastboot command.
Fastboot oem write cid xxxxxxxx.
There has been a few bricks takin Jb ota while still supercid.
Sent from my HTC One S
tominozh said:
You can use any ruu while s-OFF, just simply plug phone to computer and run ruu. No need to relock bootloader.
For the supercid, it is recommended to change it back to original with fastboot command.
Fastboot oem write cid xxxxxxxx.
There has been a few bricks takin Jb ota while still supercid.
Sent from my HTC One S
Click to expand...
Click to collapse
Uwe303 said:
Yes,but don't use the OTA RUU or you will brick your phone
Click to expand...
Click to collapse
Thanks for your fast response, how do i know my original CID?
Im going to flash
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
So do i need to change my CID?
yooouuri said:
Thanks for your fast response, how do i know my original CID?
Im going to flash
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
So do i need to change my CID?
Click to expand...
Click to collapse
Just change it to
Fastboot oem writecid HTC__001
Sent from my HTC One S
tominozh said:
Just change it to
Fastboot oem writecid HTC__001
Sent from my HTC One S
Click to expand...
Click to collapse
Thanks
Edit;
If i change my CID to HTC__001 and i run the RUU, i cant change my language to dutch.
@tominozh
Edit;
Changed to HTC__E11, lets run the RUU again and hope!
CIDs list: http://forum.xda-developers.com/showthread.php?t=2139447
tominozh said:
Just change it to
Fastboot oem writecid HTC__001
Sent from my HTC One S
Click to expand...
Click to collapse
Its not mandatory to change your SuperCID back to stock just to install a RUU (with OTA RUU you get problems, but not with normal ones).
yooouuri said:
Thanks
Edit;
If i change my CID to HTC__001 and i run the RUU, i cant change my language to dutch.
@tominozh
Edit;
Changed to HTC__E11, lets run the RUU again and hope!
CIDs list: http://forum.xda-developers.com/showthread.php?t=2139447
Click to expand...
Click to collapse
Where you cant change the language?
Hey, I have a Rogers HTC One X and I've installed ViperXL 4.2 and recently it's been turning off the Data and i've been getting random restarts. I read around and it seems the problem is the radio and the way to fix it is to get S-Off. I followed a few tutorials and they've all ended in errors.
It seems like my phone has the Original CID, yet I can't change it even though the bootloader is unlocked.
I followed this Tut :http://forum.xda-developers.com/showthread.php?t=2155071
Tried this method for CID :http://forum.xda-developers.com/showthread.php?t=2212737
Any Ideas?
Try Rumrunner s-off instead, you don't need SuperCID for that.
Http://Rumrunner.us
Once you have s-off you can easily change your CID with a fastboot command:
Code:
fastboot oem writecid 11111111
Then you'll be able to flash the 2.15 firmware package.
Sent from my Evita.
timmaaa said:
Try Rumrunner s-off instead, you don't need SuperCID for that.
Http://Rumrunner.us
Once you have s-off you can easily change your CID with a fastboot command:
Code:
fastboot oem writecid 11111111
Then you'll be able to flash the 2.15 firmware package.
Sent from my Evita.
Click to expand...
Click to collapse
Awww yeah! Thanks dude!!!!
Hi,
I have an AT&T HTC One X. It has unlocked Bootloader (hboot 1.09), does this mean I have Super CID?
I want to make it S-Off.
Thanks,
Oded
Edit: deleted
Well yeah, it pretty much does mean you have SuperCID because you can't unlock the bootloader on the at&t model without SuperCID. But the hboot has nothing to do with it. Just double check the CID by using this fastboot command:
Code:
fastboot oem readcid
It'll almost definitely come up as 11111111.
Sent from my Evita