Related
What are La fleur firmwares? I noticed this "branding" for several samsung devices.
If anyone flashed one of the new p3110/p3100/ us verizon tab with the new 4.1.2 update can he please confirm if smart stay is working or not.
Sent from my GT-I8190 using xda app-developers app
pezmet said:
what are la fleur firmwares? I noticed this "branding" for several samsung devices.
If anyone flashed one of the new p3110/p3100/ us verizon tab with the new 4.1.2 update can he please confirm if smart stay is working or not.
Sent from my gt-i8190 using xda app-developers app
Click to expand...
Click to collapse
i think La fleur is a network operator.
As in firmware list there is also mentioned Telenor in brackets.
Droidlover123 said:
i think La fleur is a network operator.
As in firmware list there is also mentioned Telenor in brackets.
Click to expand...
Click to collapse
La Fleur is the new limited edition series of Samsung products such as S3 & Tab 2 7.0 targeted at women.
In short, they are red in colour, use a 'La Fleur' boot animation & come with several pre-installed apps for women, like "La Fleur" suite (app store with women apps), CozyCot (women's chat forum) & Club21 (fashion retailer catalogue).
I use the La Fleur Tab 2 7.0 8GB but with non-La Fleur rooted stock firmware & minus all the extra bloatware on top of the usual Samsung-centric apps.
jaydaman said:
La Fleur is the new limited edition series of Samsung products such as S3 & Tab 2 7.0 targeted at women.
In short, they are red in colour, use a 'La Fleur' boot animation & come with several pre-installed apps for women, like "La Fleur" suite (app store with women apps), CozyCot (women's chat forum) & Club21 (fashion retailer catalogue).
I use the La Fleur Tab 2 7.0 8GB but with non-La Fleur rooted stock firmware & minus all the extra bloatware on top of the usual Samsung-centric apps.
Click to expand...
Click to collapse
Oops!!!
And how does it perform????
And any new feature???
Droidlover123 said:
Oops!!!
And how does it perform????
And any new feature???
Click to expand...
Click to collapse
Exactly the same on the inside compared to the normal counterparts. Just a red casing & more bloatware for us modders to remove. More reasons to root ? LOL
how can I change my la fleur boot animation to a normal one?
junpeikawada said:
how can I change my la fleur boot animation to a normal one?
Click to expand...
Click to collapse
Flash over a stock firmware that is NOT La Fleur
-OR-
Root & change boot animation
I was looking for stock samsung boot animation but I cant find one, if you guys have any, please link it here, I know how to change boot animation anyways, but thanks.
Rooting GT2 P3100 La Fleur
Dear jaydaman, how do I root La Fleur? I own one and tried rooting the using Odin and CF Auto Root but not successful at all.. how did you do it? Thanks.
jaydaman said:
Flash over a stock firmware that is NOT La Fleur
-OR-
Root & change boot animation
Click to expand...
Click to collapse
cyprodevil said:
Dear jaydaman, how do I root La Fleur? I own one and tried rooting the using Odin and CF Auto Root but not successful at all.. how did you do it? Thanks.
Click to expand...
Click to collapse
Now that you mention it, I realised the first time I used CF Auto-Root on the default La Fleur firmware, the root failed after a factory reset, although it did work before the reset...
I ended up flashing a standard non-La Fleur firmware from Sammobile then using CF Auto-Root. Everything seemed to work fine after that.
Anyway, you also need to specify what was the error/message when you say CF Auto-Root was not successful?
Hi could I uninstall la fleur from my tab 2 gt-p3110 software 4.1.2
Please help me with step by step.
Please any of you have the la fleur bootanimation zip? i really want to install it in my phone, i really loved it.
Seiyi said:
Please any of you have the la fleur bootanimation zip? i really want to install it in my phone, i really loved it.
Click to expand...
Click to collapse
There you go , it has the La Fleur boot animation & shutdown as well as the wallpapers , apk and some icons
Hola resulta que tengo un dispositivo samsung galaxy s6 flat de la compañia T-Mobile a este telefono lo deje en un local de reparación de teléfono para que liberen la banda y así utilizarla con cualquier SIM.
Liberaron el telefono y todo andaba muy bien, pero a eso de un mes me encontraba pasandome via USB unos archivos para un proyecto de mi universidad pesaban esos archivos como 5gb por lo que lo deje conectado y mientras conversaba, entonces vi que me salio una notificación de que se ah retirado la SIM y me apararecia el boton de reiniciar y pues espere que se pasen todos los archivo y lo reinicie, y no me detectaba la SIM por lo que ahora voy a intentar flashear mi teléfono con ODIN pero me sale Sw rev. Check fail. Device: 6, binary 5 y no se que significa ese error. alguien que me ayude porfavor
Descarga el Firmware mas nuevo para tu modelo desde sammobile, la version que intentas flashear (5) es anterior al Bootloader que tiene tu telefono (6) por eso no te lo permite.
Hello! I have exactly the same problem, I get the following error when trying to flash fw.
"Sw rev. Check fail. Device: 6, binary 5".
Did you solve it? If yes, can you post the link to the firmware?
Thanks in advance.
Vincenzo.
You can't downgrade from bit6. Flash any version of firmware 7.0 bit 6 (like g920fxxu6...)
i have the sam problem ..can any one post tutorial how to fix Sw rev. Check fail. Device: 6, binary 5 pleaseeeee
virtualfish said:
Hello! I have exactly the same problem, I get the following error when trying to flash fw.
"Sw rev. Check fail. Device: 6, binary 5".
Did you solve it? If yes, can you post the link to the firmware?
Thanks in advance.
Vincenzo.
Click to expand...
Click to collapse
did you find any solution
---------- Post added at 07:15 AM ---------- Previous post was at 07:11 AM ----------
archyshabo said:
i have the sam problem ..can any one post tutorial how to fix Sw rev. Check fail. Device: 6, binary 5 pleaseeeee
Click to expand...
Click to collapse
did u fix it
kaddonat said:
did you find any solution
---------- Post added at 07:15 AM ---------- Previous post was at 07:11 AM ----------
did u fix it
Click to expand...
Click to collapse
so uhm, basically i solved, or at least i hope, downloading a firmwware that in the name include a v6. practically my phone flashed correctly, but even now i have the same problem as before, phone stuck in bootloop, and no recovery. Only download, but it seems without any meaning at this point (for me at least)
t6yr said:
so uhm, basically i solved, or at least i hope, downloading a firmwware that in the name include a v6. practically my phone flashed correctly, but even now i have the same problem as before, phone stuck in bootloop, and no recovery. Only download, but it seems without any meaning at this point (for me at least)
Click to expand...
Click to collapse
Hey, did you go any further? I'm stuck with this problem, and my device binary is 6 even though the latest firmware for my country is 5.
Davibarreto said:
Hey, did you go any further? I'm stuck with this problem, and my device binary is 6 even though the latest firmware for my country is 5.
Click to expand...
Click to collapse
unfortunately i haven't find a working method; BUT a way i found that can solve the problem is to wait until some dev. come out with some progress. Non the less the knoxx it's a safety feature implemented to prevent data leaking (i think this is the purpose), and to prevent it the must had put on it some work on it to prevent whoever might be to modify the phone data/software.
ps. just today watching a yt video guess what was the ad about. Samsung security knoxx :crying:
---------- Post added at 04:45 AM ---------- Previous post was at 04:41 AM ----------
Davibarreto said:
Hey, did you go any further? I'm stuck with this problem, and my device binary is 6 even though the latest firmware for my country is 5.
Click to expand...
Click to collapse
anyway since your device is still in rev 5 it's possible some work. You must find a rev 5 "problem solver" firmware. I've encountered some searching for a rev 6, but it cannot be downgraded so im stuck, maybe it can be your lucky day:good:
kaddonat said:
did you find any solution
---------- Post added at 07:15 AM ---------- Previous post was at 07:11 AM ----------
did u fix it
Click to expand...
Click to collapse
the issue in this thread is that the OP is trying to flash a revision 5 bootloader firmware set on a phone that has already had the revision 6 version installed. you cannot go backwards in bootloader versions. go to sammobile.com/firmware and get the a firmware set with the same or higher bootloader version and you should be fine
Davibarreto said:
Hey, did you go any further? I'm stuck with this problem, and my device binary is 6 even though the latest firmware for my country is 5.
Click to expand...
Click to collapse
did you ever manually flash firmware with Odin on your phone? Did you buy it new?
t6yr said:
unfortunately i haven't find a working method; BUT a way i found that can solve the problem is to wait until some dev. come out with some progress. Non the less the knoxx it's a safety feature implemented to prevent data leaking (i think this is the purpose), and to prevent it the must had put on it some work on it to prevent whoever might be to modify the phone data/software.
ps. just today watching a yt video guess what was the ad about. Samsung security knoxx :crying:
---------- Post added at 04:45 AM ---------- Previous post was at 04:41 AM ----------
anyway since your device is still in rev 5 it's possible some work. You must find a rev 5 "problem solver" firmware. I've encountered some searching for a rev 6, but it cannot be downgraded so im stuck, maybe it can be your lucky day:good:
Click to expand...
Click to collapse
the term youre looking for is "engineering bootloader", not trying to split hairs, just throw the correct term out there for yall
hi i have that issue but on my s8+
i made an attempt at rooting it and is stuck on only official binaries are allowed to be flashed
i have tried to download the firmware and flash it but it fails everytime i have tried.
any ideas
How to find bootloader ver.
How do I find the bootloader version and know which version needed from phone to sammobil? Same problem Dev:6 Bin:5 no bootloader,twrp. Just Odin download mode.
Product name SM-G925T
Current Binary: Samsung Official
System Status: Custom
FRP Lock: OFF
Secure Download: Enabled
Knox Warranty Void: 1 (0x030c)
RP or AP SWREV is B:6 K:3 S:4
Sw Rev. Check fail Device: 6 Binary 5
QUOTE=Youdoofus;80548785]the issue in this thread is that the OP is trying to flash a revision 5 bootloader firmware set on a phone that has already had the revision 6 version installed. you cannot go backwards in bootloader versions. go to sammobile.com/firmware and get the a firmware set with the same or higher bootloader version and you should be fine
did you ever manually flash firmware with Odin on your phone? Did you buy it new?
the term youre looking for is "engineering bootloader", not trying to split hairs, just throw the correct term out there for yall[/QUOTE]
Hello.
Hey someone knows anything about the version "J4" without the "+" i have one, the Samsung Galaxy J4 Model: SM-J400M i'm trying to unlock the bootloader using this instructions but i do the thing but nothing happend. Also i tried changing the date, resetting the phone or enabling and disabling the knox feature etc etc... but the OEM line does not appears in developer options.
Specs info: CPU-Z
help?
Also the phone it tends a lot of random unexpectedly shutting down, especially playing games... :crying:
kapmino269 said:
Also J4+
Does your phone support treble Rom ?
Click to expand...
Click to collapse
How i can check that?
kapmino269 said:
Write in play store
check treble
And download app .
Click to expand...
Click to collapse
supposedly Yes.
New Picture. https://prnt.sc/n26sz5
kapmino269 said:
@Jorgeapp
Upload picture in another site this site is unsafe or upload it by xda labs apk .
I can't find picture in that site .
Also you don't need to ask for that just google "how to check treble support ".
Click to expand...
Click to collapse
I finally finish the Prenormal RMM state and when i turn ON the OEM unlock the phone restart and return to the factory mode, i check again and the OEM unlock is missing like nothing happend... i dont know what to do, no one has rooted my device... all tutorials are for others models. i also try using kingroot and similars and nothing.
what a disappointment.
Jorgeapp said:
I finally finish the Prenormal RMM state and when i turn ON the OEM unlock the phone restart and return to the factory mode, i check again and the OEM unlock is missing like nothing happend... i dont know what to do, no one has rooted my device... all tutorials are for others models. i also try using kingroot and similars and nothing.
what a disappointment.
Click to expand...
Click to collapse
Hi! I've the same model as you, and it looks like samsung it's updating without the option now.
I wrote about this about 2 month ago i think, if you want you can read it here:
https://forum.xda-developers.com/general/help/oem-t3892877
But, if you want modify some layers read about Andromeda and Substratum here:
https://forum.xda-developers.com/apps/substratum/official-starting-substratum-andromeda-t3798316
kapmino269 said:
Reflash stock and try again alo you can root your j400f:
Unlock oem from DEVELOPERS DEVELOPERS OPTION
Then
- Go to download mode .
-Flash this with odin .
https://github.com/TwrpBuilder/andr....2.3-TwrpBuilder-j4ltejx-2018-10-22_17-38.tar
-Reboot twrp recovery.
-Then flash this by twrp
Rmm disable security :
Link:
https://forum.xda-developers.com/attachment.php?attachmentid=4481843&d=1524258795
-then flash magisk :
Link:
https://github.com/topjohnwu/Magisk/releases/download/v18.1/Magisk-v18.1.zip
---------- Post added at 08:52 PM ---------- Previous post was at 08:49 PM ----------
Don't flash stock send picture from download mode may by another phone and upload it .
Click to expand...
Click to collapse
wow.. i just bought this phone and want root access due to dev needings. i study programming and i was looking for twrp and some way to get root. and you just posted this!. :laugh::laugh::highfive:
just want to know if this works? becuase i already found twrp for the j4+ but was looking for the normal J4.
also i need to learn everything about the prenormal stuff and all that before rooting. but you're a lifesaver.
kapmino269 said:
Flash RMM-State_Bypass_Mesa_v2.zip after installing twrp .
Click to expand...
Click to collapse
I'll do soon as I can.
Forgot to say.. how do you enable oem unlock on this device? Do I have to wait a whole week with it turned on? I want all the necessary information before installing TWRP and rooting. Also.. what about Android pie? Because Samsung posted that they will update this device to Android Pie, same for the j4+ one. I don't want to softbrick the phone or lose root when updating.
Sent from my Samsung SM-J400M using XDA Labs
Alguien tiene algun kernel para el j4lte que funciome para el nethunter ?
Es lo mismo J400 M que J400F
No entiendo ,porque parten hablando del j400 M y terminan dando remedios para el J400 F ....
Just came here as a way to thank everyone for this thread and say that the twrp for j4lte works perfect fine for SM-J400m on latest version android 10. Just enable OEM lock and flash it through ODIN.
[QUOTE = "endmjwknj, postagem: 84400367, membro: 11390151"]
Vim aqui como uma forma de agradecer a todos por este tópico e dizer que o twrp para j4lte funciona perfeitamente bem para SM-J400m na versão mais recente do Android 10. Basta habilitar o bloqueio de OEM e atualizá-lo através do ODIN.
[/CITAR]
can you help me install twrp on android 10 on j400m?
can you help me install twrp on android 10 on j400m?
brunoyp said:
[QUOTE = "endmjwknj, postagem: 84400367, membro: 11390151"]
Vim aqui como uma forma de agradecer a todos por este tópico e dizer que o twrp para j4lte funciona perfeitamente bem para SM-J400m na versão mais recente do Android 10. Basta habilitar o bloqueio de OEM e atualizá-lo através do ODIN.
[/CITAR]
can you help me install twrp on android 10 on j400m?
Click to expand...
Click to collapse
i could but there are guys who are more experienced to help you through all the process. Join this telegram group https://t.me/SamsungGalaxyJ4 and they're certainly assist you without a doubt.
Exynos Galaxy J4 is kind of similar to J3 2017 in terms of chipset and resolution so TWRP and ROMs of J3 2017 may work on J4.
Samsung Galaxy J3 (2017) ROMs, Kernels, Recoveries
Improve your Samsung Galaxy J3 (2017)'s battery life, performance, and look by rooting it and installing a custom ROM, kernel, and more.
forum.xda-developers.com
Just purchased this like 3 days ago and now want to root it but i cant seem to find a guide or video tutorial which would have been nice. I got mine from bestbuy and its the G970U1 Snapdragon version.
No puedes rootear ese , tiene el bootloader bloqueado, es la version americaana.
If Samsung Knox detects it is rooted, a number of apps may quit working, possibly including some payment apps.
Sent using Tapatalk
My advice for you, dont root it. You will loose many apps
no need root
From what I understand, you can not root the Snapdragon variant, no way to unlock the bootloader.
Hi, I have an OPPO device (OPPO A94 5G, CPH2211, European version, Italy).
I was able to unlock the bootloader.
I wanted to put the Root on the phone but I found no custom recovery (TWRP, Orange Fox).
I wanted to ask if I could get some help putting root on my phone.
Any advice is helpful
Thank you.
You root a device's Android by simply adding a suitable su cmdlet to Android's filesystem and make the cmdlet executable.
GaNux said:
Hi, I have an OPPO device (OPPO A94 5G, CPH2211, European version, Italy).
I was able to unlock the bootloader.
I wanted to put the Root on the phone but I found no custom recovery (TWRP, Orange Fox).
I wanted to ask if I could get some help putting root on my phone.
Any advice is helpful
Thank you.
Click to expand...
Click to collapse
try use magisk.
may I ask how you unlocked the bootloader?
GaNux said:
Hi, I have an OPPO device (OPPO A94 5G, CPH2211, European version, Italy).
I was able to unlock the bootloader.
I wanted to put the Root on the phone but I found no custom recovery (TWRP, Orange Fox).
I wanted to ask if I could get some help putting root on my phone.
Any advice is helpful
Thank you.
Click to expand...
Click to collapse
same here
may I ask how you unlocked the bootloader?
idem ici
Puis-je vous demander comment vous avez déverrouillé le chargeur de démarrage? pour oppo a94 5G cph2211
Merci
Probably used MTK client but I really wanna know how you unlocked the bootloader.
ZipTies said:
Essayez d’utiliser MagiskPuis-je vous demander comment vous avez déverrouillé le chargeur de démarrage?
Click to expand...
Click to collapse
ZipTies said:
Option Dev
Click to expand...
Click to collapse
Déverrouillage du bootloader