Hi there
Im having trouble to get CM.10.1 working on k860. What happened is i downloaded the latest cm10.1 szb file and placed it in sdfuse after backing up all my files etc. Then when i flashed the rom- The phone allows me to use it without network coverage for a minute or two, then locks it. SIM lock- and my sim code does not work to unlock it.
The Overseas firmware rom works perfectly, and enables me to do all the things.. however, i want to switch to CM. i dont want to keep using it.
I tried to install the CM10 some time ago and I had the same problem, I thought it was a baseband problem that was related to CM programming. I cant find any details on how to unlock my phone. I dont think its locked onto the carrier because the first sim i used was a chinese sim bought in beijing.
Help.
Fakejameh
Related
Hello all,
I recently got the XT926 from Ebay. The phone had CM 10.2 ROM installed when I got it and it could detect my SIM card. Everything worked almost fine. I was able to access the internet through HSDPA and I was able to make calls. However I had issues with not being able to send SMS and MMS. I couldnt save the SMSC number so I decided to install the stable release of CM 10.1. I wiped, and flashed CM10.1 using TWRP that already existed in the phone. Now, after that, the phone will no longer detect any SIM cards no matter what operator or ROM I use. I live in Sweden and I'm using the GSM network. Wifi and all other functions work fine.
I even installed the official VRZ_XT926_9.8.1Q-79-1_CFC.xml but still its not able to bypass the activation screen because it wont detect any sim cards.
Any idea or suggestions on how to fix this?
Thanks in advance
I have had my original Xoom for a long while now - not sure exactly the version (601 rings a bell) but it was early in the very first release. ( it has 3g and wifi)
I've always had a sim card in it, however it was deactivated LONG ago, but still worked on wifi etc. My little fella uses it for simple games etc, but at some point the sim came out and we lost the little bracket thingy that it sits in - i believe that's needed right ? its been so long.
So today after numerous reboots, I simply could not get it factory reset, so I ended up following some great guides here to unlock then load the stock rom on there - I chose the Telstra AU version for 601 as it was the only version that sounded right for me.
That all went great and easy, however, without a sim, on startup im getting the "Tablet is not provisioned ... " error, and there is no way to unlock it.
So a number of questions - will stock rom simply not work at all without a sim ? I tried to 'fastboot oem unlock' and boot up like that to no avail.
If it won't work without a sim, is there a quick and dirty custom rom that is stupidly easy to install ? I like how easy it was to load the stock rom - if there is something like that great, otherwise the instructions i've seen for custom roms seem a little too much for my time.
Any pointers appreciated - i just need to get it back to usable for a 7 year old with games - it would be nice to install custom rom with latest android so that he can play some of the newer games, but not if its tricky and will take too much of my time - in that case i'm happy to just use stock if i can get it working without sim.
please can anyone at least advise whether this tablet with stock rom should work or not without a SIM ? (obviously 3G version AU)
arnies_fone said:
please can anyone at least advise whether this tablet with stock rom should work or not without a SIM ? (obviously 3G version AU)
Click to expand...
Click to collapse
The xoom 3G+wifi work perfectly with or without sim card.
OK
HI Friends, (@Vinay)
I am new here, and have specifically registered to seek your help
I have D2212 IN version which was SIM unlocked.
Apparently, I was successful in
1) Unlocking the boot loader
2) Installing Vinay's Custom Nitrogen ROM
Subsequently, I used the phone happily for over 1month and problems started happening where Phone lagged so much that it became unbearable.
Also at the same time, I noticed my phone would lose its network.
I would get a X next to SIM indicator. No Signal. I swapped the SIM into other phone, the SIM works fine.
I put other working sim in the E3 D2212, again no Network. No Data (2G, 3G). Only WiFi works
So I decided to roll back to D2212_18.5.B.0.26_Customized IN.ftf via Flashtool
Still no dice. I still see no network.
When I hit *#*#7378423#*#*
I think (repeat think) the phone is SIM Locked.
No matter which slot (1 or 2) I insert it, I don't get Network or DATA
But I can certainly vouch the Same Vodafone IN SIM was working on the phone earlier.
Any help in this regards is greatly appreciated.
Regards
Dharmesh Shah
Mumbai, INDIA
Did you flashed the stock rom correctly?
Well I thought so
HI @vincy009
Many thanks for responding. Appreciate your help.
Well I thought I did.
I referred to a few youtube videos to do it using flash tool.
Also, pls note, I also tried flashing back Vinay's Nitrogen ROM, that too would not get Network.
So,it was 100% issue with the way I was flashing the rom (Stock or other)
Eventually, I surrendered and sent the Phone to Sony who refused to fix it citing it to be out of warranty due to unlocked boot loader
So I had to submit to a local Mobile repair shop who fixed it.
But I am yet to ascertain what exactly he did.
In the mean time, I have already read the Newbie's Q&A and other threads where they explain how to use flash tool.
If there is an accurate thread/howto/etc, pls point me to that, so that I can avoid mistakes in future.
Maybe you done something wrong in flashing step or it wud have been any Lil hardware problem.. If wanna do new things always get a nandroid backup.. So it wont get mess up.
I got this e3 that i flashed 3 different stock roms, and i can't get sim card to work on any of them. With or without sim installed i get a failed check picture and i can't use sim, tho other things work just fine. I have tried a central european rom, a rom made for my counrty, but im not sure weather the sim card is from that operator the rom is made for.
I took the phone form a frined to try and fix it since it was stuck in boot loop, so i've handled that and i'm not sure how to fix this :crying:
The roms we apropriate for the model, d2203, used the both latest one and the one before.
Did you resolve this?
I found that if you run flashtool on pro mode it will allow flashing of simlock.
I don't know exactly what's that but I hope it (and google) helps you
Hi ,
I recently flashed my Galaxy S8+ with Hades ROM which is a ONE UI based ROM .
Everything works fine but sim card is not getting any signal or just shows " not registered on network" sometimes.
But it do work sometimes when connected to WiFi n when WiFi calling is enabled , but I can't use my mobile data or calls from my carrier network.
THE PHONE BASICALLY HAS FEW ISSUES BEFORE FLASHING NEW ROM .
1 ) It was bought from UAE and it was already rooted when I got it .
2) Attempt to flash stock ROM failed everytime cz the SIM card was not detected even when it was in stock ROM itself.
3) so many try with different versions of Odin and different versions of Stock firmware , it did not work .
Please give me some fix .
(NOTE) : SIM card is working very fine but the issue is with the phone itself.
What is so "secret" about this topic, that no one of the experts likes to talk abaout it and help us out? So many have this problem. Even though for those like me who have a stock backup auf EFS and Baseband. If somebody would be so kind to send a pn with further hints would be very kindful. Thanks a lot folks.
I had the same problem after flashing the stock ROM, but i just can't find help with this problem.
I gave up and bought a new phone.