My friend brought back from Dubai windows surface model 1516 rt 32gb hanging on the logo to download surface, the problem is not because of the nature of the iron in the words of a familiar set Russian language , and then accidentally deleted somehow English, and pressing different buttons and the power button to finish off his that he is now only loaded to the logo , revised the entire internet and forums presmotrel but what good would not have found trying to do both but here http://forum.xda-developers.com/showthread.php?t=2437192, too, did not help , and yet each of stupidity undone usb flash drive for restoration . Thanks in advance for advice or help! but to the nearest service very far.
You need to find a copy of the USB Recovery image (theres a link on here somewhere) and put on a USB stick, then boot from that (power on + Volume down) to restore the system
Or create a recovery usb from another working Surface RT
xsoliman3 said:
You need to find a copy of the USB Recovery image (theres a link on here somewhere) and put on a USB stick, then boot from that (power on + Volume down) to restore the system
Or create a recovery usb from another working Surface RT
Click to expand...
Click to collapse
I searched the forum but did not find in this forum backup, if there was the same with the working window, how to backup and what to press to restore I know, the problem is that I do not have a backup (((
Microsoft released a recovery image for the US at least: http://www.microsoft.com/en-us/download/details.aspx?id=40810
I don't know if you need a different one.
xsmc said:
I searched the forum but did not find in this forum backup, if there was the same with the working window, how to backup and what to press to restore I know, the problem is that I do not have a backup (((
Click to expand...
Click to collapse
trig0r has a few
southbird said:
Microsoft released a recovery image for the US at least: http://www.microsoft.com/en-us/download/details.aspx?id=40810
I don't know if you need a different one.
Click to expand...
Click to collapse
Thanks, but unfortunately does not work, download, archive and unpack at usb stick (tried 5 different flash drives), the reaction is not what the flash drive LED does not blink even for interest made out to see what's inside, noticed that next to the camera has a small red light diode which, when connected flash drive frequently and rapidly blinking, in one forum and found a similar problem description flashing red disassembled, they say it's the problem of hardware (((
xsmc said:
Thanks, but unfortunately does not work, download, archive and unpack at usb stick (tried 5 different flash drives), the reaction is not what the flash drive LED does not blink even for interest made out to see what's inside, noticed that next to the camera has a small red light diode which, when connected flash drive frequently and rapidly blinking, in one forum and found a similar problem description flashing red disassembled, they say it's the problem of hardware (((
Click to expand...
Click to collapse
Are you using it properly - holding down the "volume down" button then pressing and holding the power button for about 3 seconds?
Myriachan said:
Are you using it properly - holding down the "volume down" button then pressing and holding the power button for about 3 seconds?
Click to expand...
Click to collapse
Yes, tried about 50 times, did not help, just more defective motherboard and other options do not see (((
Related
Okay guys, I have an annoying problem. My phone after the ICS update does not want to go into CWM Recovery with the Power button + vol down (or up) method. I can never get the darn thing to work. It just loads up until the white samsung logo and then goes black and just vibrates. Any idea what could be the problem? It's an issue because it means I can't root or anything since stock won't allow me to go into recovery. The only way I used to get into recovery was through rom manager and I obviously need super user permissions to do that.
Another thing is, whenever I power on my phone with the usb cord plugged in, it automatically enters download mode. I know you're suppose to hold certain buttons but I just power the thing on and it goes straight to the DL mode screen. I'm thinking these two things could be related.
Any idea on how to fix this? I went back to complete stock and it didn't do a thing.
ArecxP said:
Okay guys, I have an annoying problem. My phone after the ICS update does not want to go into CWM Recovery with the Power button + vol down (or up) method. I can never get the darn thing to work. It just loads up until the white samsung logo and then goes black and just vibrates. Any idea what could be the problem? It's an issue because it means I can't root or anything since stock won't allow me to go into recovery. The only way I used to get into recovery was through rom manager and I obviously need super user permissions to do that.
Another thing is, whenever I power on my phone with the usb cord plugged in, it automatically enters download mode. I know you're suppose to hold certain buttons but I just power the thing on and it goes straight to the DL mode screen. I'm thinking these two things could be related.
Any idea on how to fix this? I went back to complete stock and it didn't do a thing.
Click to expand...
Click to collapse
check ur pm mate
Its power button + volume up AND down... hold both buttons and the power button.
sulpher said:
Its power button + volume up AND down... hold both buttons and the power button.
Click to expand...
Click to collapse
I wasn't being specific, I just named the buttons off the top of my head. Either way, the methods don't work
ArecxP said:
I wasn't being specific, I just named the buttons off the top of my head. Either way, the methods don't work
Click to expand...
Click to collapse
My phone was being a bit finicky with this as well, I found the below sequence to work for me every time.
Press and hold both vol+ and vol-
Press and hold power
Wait until phone is vibrating once every couple of seconds
Release power
Release vol+ and vol-
ArecxP said:
I wasn't being specific, I just named the buttons off the top of my head. Either way, the methods don't work
Click to expand...
Click to collapse
u need to b specific to get proper help.
u stated "Either way, the methods don't work ", specifically what methods r u talking about, there is only one method in using the buttons that works as RabidSmurf has stated, but first pull battery and dont keep usb plugged in, if that didnt work redownload cwm, check the md5 checksum and reflash using odin
To get into download mode I'm holding power+vol up+vol down
after the phone starts up release the power and keep holding up+down.
Let me know how it works.
ArecxP said:
Okay guys, I have an annoying problem. My phone after the ICS update does not want to go into CWM Recovery with the Power button + vol down (or up) method. I can never get the darn thing to work. It just loads up until the white samsung logo and then goes black and just vibrates. Any idea what could be the problem? It's an issue because it means I can't root or anything since stock won't allow me to go into recovery. The only way I used to get into recovery was through rom manager and I obviously need super user permissions to do that.
Another thing is, whenever I power on my phone with the usb cord plugged in, it automatically enters download mode. I know you're suppose to hold certain buttons but I just power the thing on and it goes straight to the DL mode screen. I'm thinking these two things could be related.
Any idea on how to fix this? I went back to complete stock and it didn't do a thing.
Click to expand...
Click to collapse
Make sure it is not attached to any USB. Not even the power outlet because it will take you to firmware update mode (download mode) and hold up down volume keys and power until you see the white Samsung logo. good luck!
i had to deal with this when the firmware failed to ugprade for some reason, what i did was download odin and the stock rom and flash it with odin, i was back up in no time
Not booting
Frnds plz help
After flashing am n m same soc chipset custom rom my phone is not going in cwm also another problem is after pressing the power button the phone screen is gping black n then boot audio is playing but phone is not booting completely.
To be more specific i have cqnvas 2 plus with mt6589 and pne site there was eom name note 5 evolution for a116 hd with same soc i.e. mt6589 hence i flashed the rom it flashed succesfully also but then the problems occurred.
Plz help me fast thx in advance.
Hello,
I am extremely afraid of what answers/comments I'll get but I will have to take my chances.
My situation is this - My mate 7 is stuck on the (glowing?) Huawei logo. I don't know the key combos to get into bootloader (as I am trying anything, ie - power + vol up, etc) and I don't know the combo to the recovery., as they seem to not work.
I am OK with having to start over; meaning flashing the firmware (that's the term I'm hoping) to get myself where I was. I know that I was on the B120SP04 firmware.
My question is - can anyone (please please) just guide me to get my phone back up and running. I need to know what files I can flash and which recovery I can flash it in, etc.
Please help (sorry for sounding like this, it's just that this was a gift to myself because of a very, extremely crappy year thus far).
Thanks everyone for your consideration.
shokxdauser said:
Hello,
I am extremely afraid of what answers/comments I'll get but I will have to take my chances.
My situation is this - My mate 7 is stuck on the (glowing?) Huawei logo. I don't know the key combos to get into bootloader (as I am trying anything, ie - power + vol up, etc) and I don't know the combo to the recovery., as they seem to not work.
I am OK with having to start over; meaning flashing the firmware (that's the term I'm hoping) to get myself where I was. I know that I was on the B120SP04 firmware.
My question is - can anyone (please please) just guide me to get my phone back up and running. I need to know what files I can flash and which recovery I can flash it in, etc.
Please help (sorry for sounding like this, it's just that this was a gift to myself because of a very, extremely crappy year thus far).
Thanks everyone for your consideration.
Click to expand...
Click to collapse
EDIT - to add a little more to this, and I can't believe what a moron I am, I just need to know how to get in to some type of recovery because it seems like no matter what buttons I press I can't even get into anything. So even better - is there a button combo to get into fastboot? I can then flash CWM recovery from there and end my fears of having a phone that doesn't work.
Thanks again all...
shokxdauser said:
EDIT - to add a little more to this, and I can't believe what a moron I am, I just need to know how to get in to some type of recovery because it seems like no matter what buttons I press I can't even get into anything. So even better - is there a button combo to get into fastboot? I can then flash CWM recovery from there and end my fears of having a phone that doesn't work.
Thanks again all...
Click to expand...
Click to collapse
Mate and off to the USB cable now 10 seconds the Power button + Volume Down and hold until you're in the fast boot mode.
shokxdauser said:
Hello,
I am extremely afraid of what answers/comments I'll get but I will have to take my chances.
My situation is this - My mate 7 is stuck on the (glowing?) Huawei logo. I don't know the key combos to get into bootloader (as I am trying anything, ie - power + vol up, etc) and I don't know the combo to the recovery., as they seem to not work.
I am OK with having to start over; meaning flashing the firmware (that's the term I'm hoping) to get myself where I was. I know that I was on the B120SP04 firmware.
My question is - can anyone (please please) just guide me to get my phone back up and running. I need to know what files I can flash and which recovery I can flash it in, etc.
Please help (sorry for sounding like this, it's just that this was a gift to myself because of a very, extremely crappy year thus far).
Thanks everyone for your consideration.
Click to expand...
Click to collapse
Lol nothing to get to much worried about.
Just download firmware of your mate 7.....MT7-L09......Once downloaded you will see a file named "update.app" (you may have to unzip a file to get this file "update.app"
Now from ur pc transfer the "update.app" on ur sdcard in folder having name "dload"(you have to create this folder)
New put your sdcard in your mobile
Now press vol up , vol down and power key simultaneously for 5 to 10 secs approx.
Now the phone will automatically install firmware in your mobile and your will running again normally.
Give feedback if it worked or not?
Sent from my HUAWEI MT7-L09 using XDA Free mobile app
hannanzikrea said:
Now press vol up , vol down and power key simultaneously for 5 to 10 secs approx.
Click to expand...
Click to collapse
only vol up, vol down, then power. not all three simultaneously! Otherwise it will not work.
Fooox1 said:
only vol up, vol down, then power. not all three simultaneously! Otherwise it will not work.
Click to expand...
Click to collapse
Well I always press these keys simultaneously and it always works for me....I have even tried it on mate
My previous phone was ascend p6 ...
Sent from my HUAWEI MT7-L09 using XDA Free mobile app
hannanzikrea said:
Well I always press these keys simultaneously and it always works for me....I have even tried it on mate
My previous phone was ascend p6 ...
Sent from my HUAWEI MT7-L09 using XDA Free mobile app
Click to expand...
Click to collapse
OK sorry all I'm now trying all the suggestions, thanks for them. I had to charge my phone since I don't even know how to turn it off. It was still at the Huawei glowing symbol (powered by Android at the bottom). From this exact point, do I just hold vol up and vol down for 5-10 seconds then press power button to get it into fastboot?
Thanks again
You insert an SD containing a folder dload that is containing UPDATE. APP. You hold vol + and vol - and power until your mate starts to flash this Update.app file you've placed on your SD.
pappschlumpf said:
You insert an SD containing a folder dload that is containing UPDATE. APP. You hold vol + and vol - and power until your mate starts to flash this Update.app file you've placed on your SD.
Click to expand...
Click to collapse
I've prepared the SD card. However I had a CM based recovery installed - the file was MT7-CWM-EN.img. Right before I started my post here, I tried to fastboot what I thought was the original recovery - file named RECOVERY-ori.img. Does it matter what recovery (CWM or stock) to use to flash this? or do I just use your button combo? One last question (sorry if I am taking too long to understand) - I'm guessing there has to be nothing else on the SD card but the dload/update.app?
Thanks
shokxdauser said:
I've prepared the SD card. However I had a CM based recovery installed - the file was MT7-CWM-EN.img. Right before I started my post here, I tried to fastboot what I thought was the original recovery - file named RECOVERY-ori.img. Does it matter what recovery (CWM or stock) to use to flash this? or do I just use your button combo? One last question (sorry if I am taking too long to understand) - I'm guessing there has to be nothing else on the SD card but the dload/update.app?
Thanks
Click to expand...
Click to collapse
Thanks everyone. I eventually got it to software update mode and it's back and working.
Hello XDA,
i have XCover3 and the device is bricked. When i would boot it only vibrate one time, wont show any light or other, i dont can get in download or recovery menü. The phone was bricked by using kies (firmware update wont finished).
I have read a lot about unbrick via SDCard (debrick.img or SDC), i hope some people have also Xcover3 or a ATF Box and can me create a Image for SDCard.
Thank you XDA
leviiis said:
Hello XDA,
i have XCover3 and the device is bricked. When i would boot it only vibrate one time, wont show any light or other, i dont can get in download or recovery menü. The phone was bricked by using kies (firmware update wont finished).
I have read a lot about unbrick via SDCard (debrick.img or SDC), i hope some people have also Xcover3 or a ATF Box and can me create a Image for SDCard.
Thank you XDA
Click to expand...
Click to collapse
Do you still have this phone or the problem? What does the screen look like?
I'm stucked with the same problem :/ Anyone a idea?
ThunderD said:
I'm stucked with the same problem :/ Anyone a idea?
Click to expand...
Click to collapse
Can you boot your phone into the download mode (by holding home vol-up and power)?
No, i tried is serveral times
ThunderD said:
No, i tried is serveral times
Click to expand...
Click to collapse
How about vol-down home and power?
So after an weekend i was successful. I don't know if it was my modified img from an 389f or just luck.
The phone didn't show anything. No charging animation, only a black screen. Also with a jig plug it only lighted up a bit, but black screen.
Then i tried my sdcard with the modified imaged.
But i think the main reason is when you press the buttons.
I started up with volume down+home and power. Release it and after a second of black screen i pressed the vol-up key. Suddenly it worked.
The timing is important! Because i was surprised i tried it several times, but only with the right timing i could enter de download mode blindly.
ThunderD said:
So after an weekend i was successful. I don't know if it was my modified img from an 389f or just luck.
The phone didn't show anything. No charging animation, only a black screen. Also with a jig plug it only lighted up a bit, but black screen.
Then i tried my sdcard with the modified imaged.
But i think the main reason is when you press the buttons.
I started up with volume down+home and power. Release it and after a second of black screen i pressed the vol-up key. Suddenly it worked.
The timing is important! Because i was surprised i tried it several times, but only with the right timing i could enter de download mode blindly.
Click to expand...
Click to collapse
Good morning, @ThunderD! I have the same issue here like you had here. Would you please share your debrick.img with me?
Good morning, @ThunderD! I have the same issue here like you had here. Would you please share your debrick.img with me?
My honor 8 died on the lancet side lights up 1 red led and then 5 times the green led and then come back. The usb connection is dead so I can not work with any program to try to re-enable it ....
Anyone can give me an explanation of what these LEDs can be ???
Thanks to anyone can give me just an indication:confuso:
This situation was created after an upgrade I believe with firmware no good
Repeat push power button vibration and usb dead pc does not detect, anything starts then flash 1 red led and then 5 green repeat this cycle 3 times then turn off
Rommco05 said:
If turn phone to charge looks like start charging?
Click to expand...
Click to collapse
If I connect the phone to the charger does not turn on anything does not charge ...... after 3/4 hours I find it hot.
The usb is no longer responding to anything ......
Only the power button makes it vibrate one time and after a second the second vibration and starts doing that notification led sequence
Thanks for the interest you are very kind
I've been trying to load it all night but nothing has changed.
From the calculations I did during the last flash within the update.app, these images were deleted: sha256rsa, crc, curver, verilist, efi, fastboot to try a recovery.
After this happened ..........................
I was programming with dc-unlocker
Thanks again for your help.
traffic75 said:
Thanks for the interest you are very kind
I've been trying to load it all night but nothing has changed.
From the calculations I did during the last flash within the update.app, these images were deleted: sha256rsa, crc, curver, verilist, efi, fastboot to try a recovery.
After this happened ..........................
I was programming with dc-unlocker
Thanks again for your help.
Click to expand...
Click to collapse
let us know what steps you followed after your device is working
goodluck
venugopalu007 said:
let us know what steps you followed after your device is working
goodluck
Click to expand...
Click to collapse
Nothing has changed at this time
I'm trying different combinations with the tast but nothing to do ......
The biggest problem that the usb is not detected and can not attach it to the pc
I've already tried with usb 2.0 always dead
I've tried in power on all keystrokes and I've never heard sound recognition windows usb
On no , no fastboot we cannot do anything .just take it to care and they will fix it .
And dload option with the correct firmware in the sd card not work starting with 3 buttons method?
I'll make it pretty easier for you if it's your luck that shines your phone will revive
First do this
Plug in your us type c port of your charger on the phone while holding volume up button for like five seconds. Then leave it to charge for 5-10 minutes and the press power button simply . If it revives , good! If not, let's continue
Now if this didn't work and your have one very simple option of press the volume low key and power button while plugging in your usb type c , which is connected to a PC.
This will open your fastboot and rescue more - open hisuit on pc , hit recovery and it should do the magic
If this also doesn't work , try unlocking bootloader via the same process and flash a recovery and receive your phone.
If nothing of this works , welcome to the league of dead honor 8.
amansaini said:
I'll make it pretty easier for you if it's your luck that shines your phone will revive
First do this
Plug in your us type c port of your charger on the phone while holding volume up button for like five seconds. Then leave it to charge for 5-10 minutes and the press power button simply . If it revives , good! If not, let's continue
Now if this didn't work and your have one very simple option of press the volume low key and power button while plugging in your usb type c , which is connected to a PC.
This will open your fastboot and rescue more - open hisuit on pc , hit recovery and it should do the magic
If this also doesn't work , try unlocking bootloader via the same process and flash a recovery and receive your phone.
If nothing of this works , welcome to the league of dead honor 8.
Click to expand...
Click to collapse
I tried but all this does not work is always stuck with that led combination and usb is death
Thanks anyway for your interest
traffic75 said:
I tried but all this does not work is always stuck with that led combination and usb is death
Thanks anyway for your interest[/QUOT
I contacted dc-unlocker what I was using and advised me to try to short-circuit and pass a fimware test I should succeed. But he does not have short-circuit procedures for my honor8.
Have any of you ever heard of this technique?
Click to expand...
Click to collapse
traffic75 said:
traffic75 said:
I tried but all this does not work is always stuck with that led combination and usb is death
Thanks anyway for your interest[/QUOT
I contacted dc-unlocker what I was using and advised me to try to short-circuit and pass a fimware test I should succeed. But he does not have short-circuit procedures for my honor8.
Have any of you ever heard of this technique?
Click to expand...
Click to collapse
Short circuit ?? What is that bro?
Click to expand...
Click to collapse
I want to ask for help: I'm not sure but could start charging a firmware including bootloader iso when booting with the led.
The function is through the SD with the dload in the previous models used by au_temp.cfg and the firm update.app I believe au_temp.cfg can give instructions to switch to the firm's upload.
The problem I find nothing au_temp.cfg for my Honor 8.
Can someone help me??? Any of you have contacts with huawei to ask this info ????
Thanks to anyone who can really help me
help me !!! help me!!
Rommco05 said:
Which port u use, usb 3.0 or usb 2.0 if 3.0 switch to 2.0z anyway I think u need to go service
Click to expand...
Click to collapse
sorry sorry sorry
I was sure I replied sorry
I tried usb 3.0 at 2.0 but there is no connection.
I tried jun and power button for 5 minutes as suggested by digigoon but the situation does not change.
The phone does not turn on the screen vibrates only when the power button is pressed and leds are lit red and 5 times green for 2 repeats and then turn off.
I'm looking everywhere but nothing exists for my problem.
"The phone worked I dc-unlocked a firm without img sha256rsa, crc, curver, verlist, efi, fastboot, to try an update and that was the result ..........:crying::crying::crying::crying::crying::crying::crying::crying:
Hello friend
I'm sorry about your situation. I googled a bit to try to find a solution and what I found was this:
https://www.google.dk/url?sa=t&sour...ggzMAU&usg=AFQjCNHnbiPHjoFd2-SXkWsS_zzHVxM1-w
It seems like three persons in this thread had the same problem and two of them had tried returning the phone to a service center and got it repaired for free.
Maybe it is a fried motherboard and if that is the case they will never know that you tried flashing anything on the ROM.
All the best!
Ihaveatattoo said:
Hello friend
I'm sorry about your situation. I googled a bit to try to find a solution and what I found was this:
https://www.google.dk/url?sa=t&sour...ggzMAU&usg=AFQjCNHnbiPHjoFd2-SXkWsS_zzHVxM1-w
It seems like three persons in this thread had the same problem and two of them had tried returning the phone to a service center and got it repaired for free.
Maybe it is a fried motherboard and if that is the case they will never know that you tried flashing anything on the ROM.
All the best!
Click to expand...
Click to collapse
I've also seen them in my own situation ...... huawei's only solution solution.
Under these conditions it does not respond to any command ......
Rommco05 said:
I really don't know what next, don't have answer to your question
Click to expand...
Click to collapse
Rommcon05 If you may think of some other try I'm here
Rommco05 said:
Leave phone somehow discharged in some situation this can help
Click to expand...
Click to collapse
You intend to let it discharged completely for 4.5 days ????
Hi,
I do own the S22 Ultra Exynos with 12/256 GB Memory,
I already tried several times to access the recovery mode to wipe out the cache partition
( powering off the phone, holding the power button and the volume down button and releasing both
as soon as the logo appears) but it doesn't work...
Anyone having the same trouble ?
Kind regards,
Valy
valrod said:
Hi,
I do own the S22 Ultra Exynos with 12/256 GB Memory,
I already tried several times to access the recovery mode to wipe out the cache partition
( powering off the phone, holding the power button and the volume down button and releasing both
as soon as the logo appears) but it doesn't work...
Anyone having the same trouble ?
Kind regards,
Valy
Click to expand...
Click to collapse
Try volume up (+) & the power button.....
I already tried that too, doesn't work either...
In the good old days, you used to have to have a usb plugged in to access recovery (and at one point actually also be in a recovery programme on a pc, or use a hacked together usb jig to do it on the fly). I would be surprised if they have gone back to that, but might be worth a try?
Turn device off,
Ensure one end of your USB Cable is plugged into the PC / Laptop
Press Power + Volume up
While you press both Power and Volume up insert the USB Cable into the phone.
Keep pressed and you should enter into the recovery, You used to be able to do this without the USB Cable, but recent changes made you require to plug it into a device.
Unsure if you can do this using a normal wall plug, i have never tried it.
valrod said:
I already tried that too, doesn't work either...
Click to expand...
Click to collapse
Maybe it's an Exynos issue, I just booted into recovery with the volume up & power button combination (no plug-in of cord needed) on my Snapdragon-powered S22 Ultra.
dave7802 said:
Turn device off,
Ensure one end of your USB Cable is plugged into the PC / Laptop
Press Power + Volume up
While you press both Power and Volume up insert the USB Cable into the phone.
Keep pressed and you should enter into the recovery, You used to be able to do this without the USB Cable, but recent changes made you require to plug it into a device.
Unsure if you can do this using a normal wall plug, i have never tried it.
Click to expand...
Click to collapse
You made my day, finally !!! I didiexactly as you saisd and it finally worked out, tank you fellow.
I did the wipe cache partition. I hope that the device will run a litlle bit better now...
Recovery mode is Not working for me neither, is there any other way to start it?
oren74 said:
Recovery mode is Not working for me neither, is there any other way to start it?
Click to expand...
Click to collapse
You can use a usb-c earbuds instead the pc....
Phone off
Usb c earbuds inserted
Vol up + power on
5-10 seconds and recovery mod,
With PC Windows + ADB
REBOOT RECOVERY
..............
oren74 said:
Recovery mode is Not working for me neither, is there any other way to start it?
Click to expand...
Click to collapse
I hsve an s22 ultra and it is locked by Samsung find my mobile. I cannot get into recovery or download mode. It keeps just coming up with the lock screen ....any suggestions
dave7802 said:
Turn device off,
Ensure one end of your USB Cable is plugged into the PC / Laptop
Press Power + Volume up
While you press both Power and Volume up insert the USB Cable into the phone.
Keep pressed and you should enter into the recovery, You used to be able to do this without the USB Cable, but recent changes made you require to plug it into a device.
Unsure if you can do this using a normal wall plug, i have never tried it.
Click to expand...
Click to collapse
After hours of googling yours was the only one that mentioned this, thanks for saving christmas Dave!
twilodog said:
I hsve an s22 ultra and it is locked by Samsung find my mobile. I cannot get into recovery or download mode. It keeps just coming up with the lock screen ....any suggestions
Click to expand...
Click to collapse
i have the same problem... did you get a solution for this problem ?
kyle1988_ said:
i have the same problem... did you get a solution for this problem ?
Click to expand...
Click to collapse
u figure anything out im in the same situation
update?
Hi All, - I had the same problem, it would just not go into recovery mode. however a slight twist i saw on a website says to do the following and it worked first time much to my suprise..
basically the phone has to be powered on to start the process..
1.HardReset.info: At first, connect the device with the computer by the USB Type C and push Volume Down + Power button to switch off your phone.
2.HardReset.info: Then press Volume Up and Power key for a short while.
3.HardReset.info: Let go of all buttons if you see the SAMSUNG logo
4.HardReset.info: Now use Volume keys to select Wipe cache partition and confirm with the Power button.
5.HardReset.info: In the next step go to Yes option.
6.HardReset.info: At last, choose Reboot system now by using the Power button.
good luck..
https://www.hardreset.info/devices/samsung/samsung-galaxy-s22-ultra-5g/wipe-cache/
Hello.
That only works with the included USB Type - C cable. It doesn't work with a USB type A cable. Both ends should be Type C.
That's why it didn't work for me earlier. I tried numerous times using the old cable from my Galaxy Note 9.
twilodog said:
I hsve an s22 ultra and it is locked by Samsung find my mobile. I cannot get into recovery or download mode. It keeps just coming up with the lock screen ....any suggestions
Click to expand...
Click to collapse
any solution??