Hello,
I'm new to the community. I generally work on PC but a friend brought me this Samsung Galaxy tab 7.0 Plus that turns on but is stuck at the "Samsung Galaxy tab 7.0 Plus" splash screen when it first turns on. I have tried the" Power+Vol up" to reset to factory but it seems to go too-quickly and then I am back to square one because nothing changed. I dont know if my friend or his kids tried to do anything crazy with this so I don't have much more info.
What I am asking... I want to get this tab back to factory, or at least a working ROM. any advice is helpful but please keep in mind I have never really worked on these devices, the one thing I do know is if I jump to conclusions I can brick the device.
Thanks in advance. If more info is needed please ask.
did you try with a retore power + vol down with Odin
http://www.sammobile.com/firmware/?page=3&model=GT-P6210&pcode=XAR&os=1&type=3#firmware
choose between 3.2 honeycomb or 4.0.4 ICS
I got the same problem before !!!
http://forum.xda-developers.com/showthread.php?t=1827942
There is my solution
I had a very similar problem to both of you and noticed that the /data (instead of /efs) directory/partition "didn't exist" according to the boot screen when i entered the default recovery mode. i partitioned it and ran a factory reset and it finally booted.
and all just in time to pull the factory US ICS update
Hi,
I installed CEBERUS V5 ROM in my Galaxy Ace without any problem, it works perfectly, when installing it on my brother's phone, it did everything OK until the last reboot in ClockWorkRecovery, the phone restarted as spected but it got stuck with the Samsung Galaxy Ace logo, it doesn't do anything else. I can't access recovery or download mode, it shows exactly the same samsung screen when doing the key combinations for each case.
When I plug it to power it doesn't show the battery image, it automatically turns on and shows samsung logo again. If I plug it to my PC it's the same and the PC doesn't recognize any plugged device. I took the battery and tried again thousand of times, and nothing seems to get that screen out.
Is there anyway I can solve this?
In case there's no chance to fix it, I have a warranty for the phone, is there anyway my provider can notice I tried to install a custom ROM?
Anyway I would prefer fixing it myself, please can you give me some advice?
Thanks a lot!
Ok, a long story here.
My son dropped his Samsung Ace2x s-7560m phone. The screen cracked. I bought a replacement screen through a reputable seller on ebay.
After installing the screen, the s7560 starts, but freezes on the Samsung screen, then boots over. This goes on and on.
I rooted the phone and flashed a 7562 stock rom to the device. The only difference between the two devices is that the 7562 is a dous phone.
The flash went well, and after rebooting, the phone boots up. It starts out as a 7560, then the screen flickers and becomes the 7562 duos.
The phone boots up. I can surf online using wifi, and the screen reacts as it should for the whole screen.
Now, when I try to call out the call does connect, but I can't end the call. The phones network does not work at all.
I have tried to enter into the recovery and can , but only by using adb. The key combos don't work. I can get the phone to boot into download mode.
The bootloader still shows as a 7560, and the software shows as a s a 7562. I think what is happening is the seller from ebay has sold me the duos screen instead of the 7560. He has refunded the money, and told me to keep the screen, so now it has become a bit of a challenge that I will defeat.
I am wanting to get the phone working. I have found a rom called kyleopen, but all the download links are removed or not working. I can put other files like cwm into the download file. When I try and access the sd card, I get an error that it can't mount it.
So..
Is there a custom rom that works on both the 7560 and the 7562 that can be installed using odin?
or:
Is there a way to flash the bootloader to be a 7562 model?
Is there a way to correct the screen issue..whereas I can still use a 7560 rom, and the screen will be detected.
As stated, I am trying to run the 7560 with a 7562's screen. I am guessing the digitizer is a bit different from device to device, and that the 7560 is just not recognizing the screen as being there. I have tried to flash the stock 7560 rom back onto the phone, but get the same issue..won't boot past the samsung screen.
Is there a file to alter to get the 7560 to accept the screen as the right one? I know the screen does work with the phone, and think the network issues I am having is because the duos feature of the rom flashed to the device.
Anybody have any ideas?
freakybaby said:
Anybody have any ideas?
Click to expand...
Click to collapse
Maybe too late.
In a call, usually if you can´t finish the call is because the proximity sensor is not working and didn´t detect that you separate the phone from your face, or when you disassembly and reassembly the phone you forgot the plastic mount of the infrared detector.
Did you get the two lines working? I mean, both phones are exactly same board and rest of the spares, but s7562 uses two sim cards, in a s7560 flashed with s7562 firmware are both sim cards works?
WBR
freakybaby said:
Ok, a long story here.
My son dropped his Samsung Ace2x s-7560m phone. The screen cracked. I bought a replacement screen through a reputable seller on ebay.
After installing the screen, the s7560 starts, but freezes on the Samsung screen, then boots over. This goes on and on.
I rooted the phone and flashed a 7562 stock rom to the device. The only difference between the two devices is that the 7562 is a dous phone.
The flash went well, and after rebooting, the phone boots up. It starts out as a 7560, then the screen flickers and becomes the 7562 duos.
The phone boots up. I can surf online using wifi, and the screen reacts as it should for the whole screen.
Now, when I try to call out the call does connect, but I can't end the call. The phones network does not work at all.
I have tried to enter into the recovery and can , but only by using adb. The key combos don't work. I can get the phone to boot into download mode.
The bootloader still shows as a 7560, and the software shows as a s a 7562. I think what is happening is the seller from ebay has sold me the duos screen instead of the 7560. He has refunded the money, and told me to keep the screen, so now it has become a bit of a challenge that I will defeat.
I am wanting to get the phone working. I have found a rom called kyleopen, but all the download links are removed or not working. I can put other files like cwm into the download file. When I try and access the sd card, I get an error that it can't mount it.
So..
Is there a custom rom that works on both the 7560 and the 7562 that can be installed using odin?
or:
Is there a way to flash the bootloader to be a 7562 model?
Is there a way to correct the screen issue..whereas I can still use a 7560 rom, and the screen will be detected.
As stated, I am trying to run the 7560 with a 7562's screen. I am guessing the digitizer is a bit different from device to device, and that the 7560 is just not recognizing the screen as being there. I have tried to flash the stock 7560 rom back onto the phone, but get the same issue..won't boot past the samsung screen.
Is there a file to alter to get the 7560 to accept the screen as the right one? I know the screen does work with the phone, and think the network issues I am having is because the duos feature of the rom flashed to the device.
Click to expand...
Click to collapse
try this install firmware for s7560 then flash cwm recovery and after that boot into recovery wipe data/factory reset then go to advanced menu in recovery and then wipe dalvick cache . reboot phone. now it should boot with no problem
sadman2 said:
try this install firmware for s7560 then flash cwm recovery and after that boot into recovery wipe data/factory reset then go to advanced menu in recovery and then wipe dalvick cache . reboot phone. now it should boot with no problem
Click to expand...
Click to collapse
So I have reflashed with the 7560 rom. I am back to a boot loop. I can't get to recovery..I was only able to do that in ADB, but can't boot up for adb right now.
ANy other ideas..or ways I can get into recovery. I can get the download screen using the buttons, but not the recovery.
Means reflashed the rom using a stock firmware and ODIN?
Sent from my beloved HTC One S using (most time buggy) Tapatalk
freakybaby said:
So I have reflashed with the 7560 rom. I am back to a boot loop. I can't get to recovery..I was only able to do that in ADB, but can't boot up for adb right now.
ANy other ideas..or ways I can get into recovery. I can get the download screen using the buttons, but not the recovery.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=45767157#post45767157
here have all the faq for this phone and the links. download daverq18 root pack and follow the instructions. then you should succesfully boot into cwm recovery
Hi well i recently got a thl t11 and rooted it without any problems until i decided to install chainfire3d without knowing it is not compatible with 4.2 jellybean after which the phone would stay stuck on boot but i could i still go to recovery mode so i chose to do a factory reset and erase all data after which the screen just went black and has been for the past hours :crying: i took i out the battery to try to go back to recovery mode but it doesnt work anymore just a short thl boot screen and then the black screen again is my phone bricked? Is there any way to fix it because i really dont want to have to buy another phone well any help is appreciated thanks in advance
kleptofox said:
Hi well i recently got a thl t11 and rooted it without any problems until i decided to install chainfire3d without knowing it is not compatible with 4.2 jellybean after which the phone would stay stuck on boot but i could i still go to recovery mode so i chose to do a factory reset and erase all data after which the screen just went black and has been for the past hours :crying: i took i out the battery to try to go back to recovery mode but it doesnt work anymore just a short thl boot screen and then the black screen again is my phone bricked? Is there any way to fix it because i really dont want to have to buy another phone well any help is appreciated thanks in advance
Click to expand...
Click to collapse
Have you tried reflashing the original ROM using Flash Tools (everything from Needrom ...)?
Me too
I also did a thing like this. I rooted the phone and it workd, than I tryed to install xPosed, it robooted, but the screen turned black. Than I started the phone in recovery mode and tried a factory reset, it turned black and now I think it's bricked. When i put off and put on the battery it makes a short logo animation and than turns black.
I tried with sp flah tool but it doesn't start or not recognise the phone, the driver are installed but with my pc and my laptop it doens't work. I hear the sound of when I connect and disconnect the phone, but apart from that it's dead. Please help me!
solved THL t11, hangs at black screen after factory reset in recovery mode
Hi,
I had the same problem with my unrooted t11. I just tried another rom and it solved the problem. The rom I used is THL_T11_140401_MNSop.cz, google it. I can not post the link as I am new to this forum...
Good luck!
Hi,
I have Samsung Galaxy Tab GT-P1000.
Earlier i have installed Cyanogenmod Jellybean ROM using CWM Recovery.
Later I Installed TWRP to install Omni Lollipop ROM.
But i got error message "data mount failed/system mount failed", while trying to swipe dalvik cache.
rom dont get installed.
Thereafter I use recovery to get back to normal, but my tab get bricked.
Now it display blank battery logo with fixed dotted circle inside it.
I have tried power n volume button to run download mode or recovery mode.
But none of these is working. Everytime I try to run download/recovery mode it seems like restarting and again the same battery logo
with fixed dotted circle inside it.
Please help me to fix it as its warranty period is over and it had sent by one of my friends in USA and I am in Nepal so I cannot send it back to him to get it work....
Thanx in advance........