Related
[N900]Dr.Ketan's Custom ROM DeOdexed | Prerooted | ZipAligned | AROMA | Fully User controlled customization
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM Features (latest update on features available on changelog post of current version. See post #2 for link)
Based on N900XXUEBOD1_India
ROM flasher file itself is Multitool and having some extra option like
-Inbuilt Aroma file manager in case anything go wrong while playing device with different mods, you can manage to explore device from recovery
-EFS Backup/Restore
-Recovery Flasher Chenglu's/TWRP/Stock (optional)
-Customized Bloatware remover, select only app you don't want.
-GPS changer (select according your location)
Inbuilt features (without selecting any mod from aroma)
All Languages enabled (default English), Deodexed, Prerooted, Deknoxed
300 fonts enabled
All Language enabled
360 degree rotation
Ad Free (you can disable from Dr.Ketan Utility)
Call Recording - Auto call record included On/Off from setting-dr,ketan ROM extra-utility
5 Way Reboot mod (Power Menu app)
Launcher theme including 6 themes
Torch option in settings-Device
ScreenShot and Torch option on power menu
Ultra power saving mod (separate App in drawer + Toggle)
Emergency Mod
S5 ToolBox
Note4 Side Key Panel
2 PullUp mod : User can select own selectable application instead of stock. 1.Launcher bottom 2.Long Press menu (long press menu option available only if you are using Note3 styme Menu)
MultiWindow Quad view + Multi Instance
Sec Launcher MOD (Hide application option + choice to select app for guesture)
Camera Hack - Use camera with Flash at low battery + Recpr qualiy and duration tweaks
SecSettings Mod
Extra Lockscreen unlock effect Light and Particle
Grey Scale power saving
App Opp Manager
Call/SMS block
Advanced Messaging features
Save/Restore
1K receipent limit
Disable SMS to MMS auto conversion
Split view toggle
Increase SMS/hr
Increase Image size for MMS
Screen On on MSG Toggle
No log for SMS/Email
Priority sender
Delay sending option
N4 Weather
Toolbox
Preactivated Toggle and added 10 app support
Add/remove app option (Dr.Ketan utility-ROM)
SideKey Panel
with preactivated Toggle
Note4 launcher with briefing
MultiWindow tray position Lt/Rt
OneHand Input[/U]
BrightnessLayout selection option[/U] (setting-notification panel)
N4 style Task manager. If you are using DPI 370 or less I recommend to choose this option as N3 Task manager causing FC. N4 Task manage showing active app list and RAM usage only. Still you can access all other information from setting-general-Application managger
Sound boost mode (set custom boot at your desired level).
No Call delay mode preactivated
No Ascending ring tome Preactivated
Added Sound button (Mute/Vibration/Sound) to power menu. Tapping mute first time - Priority, Tapping again - Mute.
- Multi DPI mod.
Though It's not possible to make every single application multi DPI but tried to solve major issues.I can't promise but still try to improve in future if time permits. Following changes made for Multi DPI
DPI changer Included in ROM If you want to support same app available on play store.
Camera Non DPI - Remain same at all DPI
Dialer Non DPI - Remain same on at all DPI
S-View cover multi DPI support added (Not tested)
Full Screen Call ID Multi DPI supported.
New unlock effects (festival)
Light
Ink
Abstract
Particle
Water
Autum
Spring
Summer
Winter
Seasonal
Geometric mosaic
Changing festival effect (No preview)
Seasonal
Spring
Autum
Winter
Summer
Real Mute mode (Base feature)
Now you can toggle Sound/Vibrate/Mute from quick panel toggle
Dr.Ketan Utilities
1.Toggle
Auto record Incoming call
Auto Record Outgoing call
Auto GPS (GPS will auto ON with some common app needs GPS)
Auto Wifi (Wifi will be turn off if remains disconnected for 10min)
Auto Blutooth (will be turn off if remains unpaired for 10min)
Smart Network (Mob data will be switched off after 30 sec of screen off)
Media scanner Enable/Disable
Login security - captures image with wrong password login with multi attempts.
Ad-free
2.Tasks
EFS Backup/Restore
Data restore Fix
IntSd FIX (fix for unable to save on intSD)
Flash recovery/Kernel/Modem from intSD
AutoScan - Enable media scan only while connected to power/USB
3.ROM
Pull Chooser - Select pullup app for bottom pull and menu long press
AirWakeup
Menu Key styler : Option to select Menu key style N3 OR Note4
Toolbox app select
Option to add Quick Launch in recent panel
Custom S-View cover
Meet here - Car finder
4.Help
general info
Optional Features Mod section
Restore SystemUI,
[*]Restore SystemUI, This mod remove all modification on SystemUI only require to change option, not while flashing ROM
StatusBar mods,
[*]3minit battery, more than thousand battery icon option
Ext SB SystemUI mods,
[*]Center clock on lock screen
[*]AOSP Toggle
Extra Mods,
[*]Toggle 2G, - Toggle 2G/3G data with screen On/Off
[*]FullScreen caller ID,
[*]Camera sound Hack, (add shutter sound menu)
[*]Remove Full screen ID, Requires only if you already flashed this mod before
[*]Transparent Genie widget, Google news and weather Transparent widget
[*]Hidden cerberus, Antitheft app - You needs to have licence purchased from play store
[*]Add all app to MW PW,
[*]Penwindow multiwindow manager, select app to enable in PW and MW,Not require if you have select All app MW PW option
[*]Manual Call record, App to enable Disable manual record
[*]Screen Recorder
[*]Quick toggle 5 (ROM default is 6x5 selecting this you will have 5x6)
[*]N4 Task manager
-Sound MOD
Boost - mod Mild,Mod and High
Viper Mod
Restore stock
-Aroma Optional CSC features with Backup/Restore option (some features not tested)
Enable camera during call
Enable Popup Notification
Shutter sound Menu
Enable Sub Menu Symbol KB
Raise name lenth limit
Max speed dial 100
Enable call button
Enable export to SD
Message
Raise recepient limit 999
SMS to MMS threshold 999
Enable folder view
Enable font features
Enable schedule msg
Disable phone nu formatting
Phonebook digit matching
Launcher Rotation
Web exit option
Wifi client 10 for MobAP
MultiWindow addOn App
Calender export
Email White BG
Clock enable Auto on off menu
Voice call waitingtone 60
National Roaming Icon enable
Web default desktop site
-Select your own region GPS fixer
- Introducing ROM settings (Extra settings) which having following features. [Extra settings have Menu-Reset option. You can use it anytime if you find functions under extra settings not working. This will reset all option to default. When you open Extra settings first time, it may take little time to open to get call from SuperSU]
Toggles (switch on the fly)
Internet meter
sFinder and qConnect layout
Recent virtual Key on Lt corner statusbar
Power virtual Key Lt cornet statubar
LockScreen rotation
Long press Menu kill
Heads up Notification
Memory clean meter
Other Mods
Signal position (Lt/Rt)
Clock stle (Rt/Center/Hide)
Week of the day (Show/Hide)
Wifi reconnect fix (set to home if disconnect repeatedly)
User Statistics
UPSM Fix (Fix for Force closing some apps while enable UPSM)
Color Options
Change colors for
Clock
Wifi
Data
Internet meter
Battery
Mobile signal
Airplane
Thanks and Credits
Thank and credits to @gharrington for battery and quick launch mod @AL_IRAQI for AOSP Toggles from here.
@ raj_ch2002 for his multidpi dialer from here @ficeto for custom settings. @BSDgeek_Jake for his Ad free host.
Installation Guide and Download.
Changelog K3
ChangeLog K4
ChangeLog K5
ChangeLog K6
ChangeLog K7
ChangeLog K8
ChangeLog K8.1
ChangeLog K9
ChangeLog K10
ChamgeLog K10.1
ChangeLog K11
ChangeLog K12
ChangeLog K13
ChangeLog K14
ChangeLog L16
ChangeLog L17
ChangeLog L18
ChangeLog L19
ChangeLog L20
ChangeLog L21
ChangeLog L22
ChangeLog L22.1
ChangeLog L23
ChangeLog L24
Installation Guide and Download - K14
If you are first time using this ROM then first download user's guid for flashing this ROM otherwise you may messup installation with wrong selection.
Download current version N900 Dr.Ketan Custom ROM K14
Here is detail instruction about Dr.Ketan Utilities
How to check MD5
Installation Guide and Download - L24 (Lollipop)
http://forum.xda-developers.com/showpost.php?p=62340659&postcount=14234
For Bug,Fix and addOn see post#3
Instruction for flashing BOOTLOADER
- I strongly recommend to use new kitkat bootloader once you update to kitkat based ROM.
To update bootloader follow this.
see update below
1.Download attached NA6_BL.tar.rar and unzip it to NA6_BL.tar.md5 file on PC
2.Run ROM zip (kitkat based ROM - K series) skip everything and just select 'stock recovery' from recovery section and flash.
3.After device reboot normally, switch off device and put device in download mod
4.Open PC Odin - select bootloader tab - navigate (browse) to your unzipped file NA6_BL.tar.md5
5.Flash
6.Install Info app from playstore and check your bootloader version
7.Now you can flash CWM to remove stock recovery.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Update : Here is stock recovery + Bootloader (NA6 kitkat) combine
Flash with PDA tab of Odin
Install Info app from playstore and check your bootloader version
After bootloader upgradation, you can flash CWM to remove stock recovery
Here is Latest NF3 Bootloader
Click to expand...
Click to collapse
Bugs,Fixes and add On
Kikat ROM
Hello friends
First development thread for Note3 but many of users of Note1 and Note2 may be familiar with me. Just couple of days back got my Note3 and finally made ROM with my like and sharing here with.
ROM features for K14
Based on N900XXUENI1_N900ODDENF1_N900DDUENG1_India
ROM flasher file itself is Multitool and having some extra option like
-Aroma updated with new binary to remove some glitch and optimized touch sensitivity and bigger fonts
-Inbuilt Aroma file manager in case anything go wrong while playing device with different mods, you can manage to explore device from recovery
-EFS Backup/Restore
-Recovery Flasher Chenglu's/TWRP/Stock (optional)
-Kernel flasher
-Modem flasher
-Customized Bloatware remover, select only app you don't want.(including Knox)
-Customized bloatware restor (all bloatware you have removed can be restore later with this)
-LockScreen Password cleaner
-GPS changer (select according your location)
Inbuilt features
Pre rooted , Zip aligned
[*]30 battery Mod (inbuilt 30 battery MOD including stock, you can change battery icon on the fly (without reboot) To change icon tap battery icon three times from status bar. Don't select show battery option in setting. tap battery icon 3 times on status bar, you will get option for battery percent, select from there.
[*]Busybox
[*]300 fonts enabled
[*]All Language enabled
[*]Init.d support
[*]Ad Free
[*]Call Recording - Auto call record included On/Off from setting-dr,ketan ROM extra-utility
[*]4 Way Reboot mod
[*]4 PullUp mod : User can select own selectable application instead of stock. 1.Launcher bottom 2.Launcher Lt pull (Only S5 launcher) 3.sFinder of Air command menu 4.Long Press menu
[*]MysFinder - Ability to select sFinder from pullUp
[*]MultiWindow Quad view
[*]Multiwindow hack - Quad view - you can open upto four app from MW
[*]Sec Launcher MOD (Hide application option + choice to select app for guesture)
[*]Camera Hack - Use camera with Flash at low battery
[*]Messaging with popup (S5 feature)
[*]S5 Lockscreen unlock effect - Ripple/Water/Particle/Light
[*]S5 style tinted statusbar
[*]My Place based profile
[*]Dr.Ketan Utilities (setting-Device-Dr.Ketan ROM Extra-Utilities) OR you can access from App drawer too. - here is latest features of Utility
This utilities have 3 Sections
1.Rom Extra settings
PullUp chooser for all pull mod - 1.Launcher bottom 2.Launcher Lt pull (Only S5 launcher) 3.sFinder of Air command menu 4.Long Press menu
2.Utilities -Toggles
Auto record Incoming call
Auto Record Outgoing call
Auto GPS (GPS will auto ON with some common app needs GPS)
Auto Wifi (Wifi will be turn off if remains disconnected for 10min)
Auto Blutooth (will be turn off if remains unpaired for 10min)
Smart Network (Mob data will be switched off after 30 sec of screen off)
Media scanner Enable/Disable
Torch light on shaking device (Dispaly should be ON, lockscreen also will be work. This is to prevent accidental ON while in pocket) It will be auto off in 20Sec
Login security - captures image with wrong password login with multi attempts.
3.Utilities -Tasks
EFS Backup/Restore
Data restore Fix
Flash recovery/Kernel/Modem from intSD
Advanced function SecMMs
Group messeging
Schedule msg
Backup/Restore SMS to SD card
Recipient limit 999
Original time stamps
Disable SMS-MMS
Raise SMS/hr limit
Split view toggle in setting menu
Increased MMS max size
Increased size of image
No SMS to MMS with Emoji
Optional Features Mod section
1.30 battery SystemUI Mod,
Restore 30 battery mod - This mod by default available in ROM select only if you have changed,
Restore Stock battery, Traffic meter and power button mods not compatible with stock, compatible to wanam battery module
Hidden power menu - Click on status bar clock - Screen off(lock). Long pressing statusbar clock - brings power menu. PS: If you select hidden power menu, clock can't be move to center
Hidden power menu + Rt Int meter.
Hidden power menu + Lt Int meter.
Soft power button on Rt side status bar,
Soft power button on Lt side status bar,
Rt speed meter No power button , Internet meter on Rt side opp to clock,
Rt speed meter Rt Power button, Internet meter on and Soft power button on Rt side,
Rt speed meter Lt Power button, Internet meter Rt side and Soft power button Lt side,
Lt speed meter No power button , Internet meter on Lt side,
Lt speed meter Rt Power button, Internet meter on Lt side and Soft power button on Rt side,
Lt speed meter Lt Power button, Internet meter and Soft power button Lt side,
8 Extra toogle on notification area, Hard Button savior,
Quick Launch in Notification,
8 Extra toogle & Quick Launch on notification area,
2 Stock battery.SystemUI Mod,
Restore Stock battery mod - This will add Stock battery instead of 30 icons OGbattery mod.
Hidden power menu - Click on status bar clock - Screen off(lock). Long pressing statusbar clock - brings power menu. PS: If you select hidden power menu, clock can't be move to center
Hidden power menu + Rt Int meter.
Hidden power menu + Lt Int meter.
Soft power button on Rt side status bar,
Soft power button on Lt side status bar,
Rt speed meter No power button , Internet meter on Rt side opp to clock,
Rt speed meter Rt Power button, Internet meter on and Soft power button on Rt side,
Rt speed meter Lt Power button, Internet meter Rt side and Soft power button Lt side,
Lt speed meter No power button , Internet meter on Lt side,
Lt speed meter Rt Power button, Internet meter on Lt side and Soft power button on Rt side,
Lt speed meter Lt Power button, Internet meter and Soft power button Lt side,
8 Extra toogle on notification area, Hard Button savior,
Quick Launch in Notification,
8 Extra toogle & Quick Launch on notification area,
3.Extra Mods,
Toggle 2G, control 3G
FullScreen caller ID, with manual call record option,
Camera sound Hack,
Transparent ACcuweather,
White Keyboard,
Remove Ad Free,
Manual Call record without fullscreen ID with High quality image, This will add record button on call screen,
Transparent Genie widget, Google news and weather Transparent widget,
Tab view for settings, Select only if you going to use ROM 320 or 360 DPI,
Remove Tab view for settings,
No SMS log,
Hidden cerberus, You needs to have purchased from play store,
Reactivate Torch Toggle, No need to select this while you flashing ROM. but in case you lose Torch toggle anytime then select this to call it back. It will remain on last position.
S5 lockscreen effects
Remove S5 lockscreen effects
Disable Launcher rotation
MultiWindow PenWindow manager
S5 Launcher with/without rotation
KidsMod (S5 app)
[*]S5 Browser
[*]S5 Airwakeup
SS5 One hand app
KidsMod (S5 app)
- Multi DPI
Option to select 320/360/400/430/480 (stock)
Credit @tkari4
I have just ported his work to N900 device, All the credit for Multi DPI goes to him only. Here is Original thread
-Sound MOD
Boost mod Mild,Mod and High
Viper Mod
-Aroma Optional CSC features with Backup/Restore option (some features not tested)
Enable camera during call
Enable Popup Notification
Shutter sound Menu
Enable Sub Menu Symbol KB
Raise name lenth limit
Max speed dial 100
Enable call button
Enable export to SD
Message
Raise recepient limit 999
SMS to MMS threshold 999
Enable folder view
Enable font features
Enable schedule msg
Disable phone nu formatting
Phonebook digit matching
Launcher Rotation
Web exit option
Wifi client 10 for MobAP
MultiWindow addOn App
Calender export
Email White BG
Clock enable Auto on off menu
Voice call waitingtone 60
National Roaming Icon enable
Web default desktop site
-Optional Build.prop Tweak ROM according your choice
3G data speed improvement
Battery saving
Wifi connect disconnect speed
Deep Sleep
Higner image quality
Improve Inetrnet speed
Increase touch responsiveness
Fast Boot
Faster scrolling
Theme Section
AirCommand theme
Pearl1
Pearl2
S5 style
Silver metallic
Restore stock
Toggle theme
3D gray
3D silver
s5 styly round (without build prop editing)
Restore stock
S5 style1 - build prop teak
Remove S5 style
Transparent/Custom Notification panel theme
Transparent Notification panel
Transparent Noti panel with Quick launch
Transparent MW theme
100 %
50%
stock
Flare effect (for light effect of lock screen)
Blue flare
Blue light
Blue Ring
Green ring
While lightening
Yellow flame
Restore stock
Background Transparency Mod (System background like setting,dialer,contacts etc)
100 % Transparent
25% (darker)
50%
75%(lighter)
Stock
-Push system files from SD card
-Select your own region GPS fixer
- ROM flashing is Optional, you can use this as Utility tool too.
- wanam Xposed compitible
-Some other utilities may I forget
Theme (Optional) - For V1
Recognized themer @123hiten have created theme exclusively for this ROM, You can get it from Post #7. Shower him thanks for his amazing work.
Though I highly recommend backup of your data.
And yes all the features you can select in one go
Detail Installation guide and download in post #2
Known bug in post#3
Bug & Fix Kitkat ROM
FC on applying live wallpaper on home and lockscreen on Note3 launcher. First remove S5 lockscreen effect from setting if you are using, then remove S5 lockscreen effect from aroma and then flash this
Issue with battery percent and battery Icon - This is not issue but, this ROM having different battery mod. follow this.
ON OG battery mod
- To change icon tap battery icon three times from status bar. OR Change it from DrKetan utility-ROM
- Don't select show 'battery percent' option in setting. tap battery icon 3 times on status bar, you will get option for battery percent, select from there.
On 3Minit battery mod
-There will be separate apk in application drawer.
Facebook Sync.Me app FC - Read this
Tip for wanam's xposed module users
If you are using any CSC features or using Penwindow or multiwindow manager then you should first implement these features and only after that should install wanam's module.
Installing wanam's module it will copy your existing features to his module resources so any thing you apply after installing wanam's module may not effective.
AddOn
Transparent/Custom notification panel background
Stock Accuweather from Note3
S5 Application pack V2 - Here is New MultiDPI S5 Launcher.
MultiDPI Gallery
Fix for older version
Transparent Notification panel and Quick panel for K10
Air Wakeup
Call FCs and Blutooth issue on K10
You will miss Torch toggle if you selected stock battery - flash this to fix. - For K10/10.1 only
Fix for K6
Full Screen Caller ID mode phone icon fix - If you are iusing Full screen caller ID mod and phone icon is big while calling like this image then flash Fix from here.
- If you want to remove sFinder mod (ability to choose alternate app for sFin in aircommand menu) Flash This
-To Disable Launcher Rotation - Flash This
Bug & Fix for MK2
S View Fix for non stock DPI
Fix2 and Fix3 Download both (fix 2 and 3 and flash with CWM)
AddOn for K2
- 30Battery mod
Bug & Fix for K1
- Sview FIX for K1 (No need on K2) - Download and flash from CWM. I recommend to flash this to all K1 users even you are not using SView.
Click to expand...
Click to collapse
Add On
FOR JB 4.3
Grey 3D Toggle
Silver Toggle
Air Command Menu pearl theme
Air command menu pearl2
Tips for Multi DPI
- Read this post for some DPI fix for S View cover
- To set 320/360/400/430/480(stock) you just have to select it from while you flashing ROM. You can also change DPI without flashing ROM too. But just remember to clear data for TouchWiz from Setting - general-App manager-All-TouchWiz.
- Tab Setting view is available in Aroma but I recommend to use it on 320 DPI otherwise it may looks ugly and sometime difficult to read all options.
- Launcher rotation you can achieve with xposed. 1. Install Xposed framework 2. Install application setting xposed module 3.enable module in frmaework 4. Open App setting module and search for Launcher - select Force Auto rotation - save - reboot device.
- Gallery can be fixed with 480 DPI setting with xposed app setting module.
320 DPI Screenshots
400 DPI Screenshots
My favorite setup for lockscreen & Homescreen
How to check md5 on PC
-Copy md5 for file you want to check
-Download and extract attached md5.rar
-Run program md5 on PC and select verify an md5 checksum in selection box
-Paste md5 on first tab
-Browse file in second tab for which you want to verify
If md5 matches then your downloaded file is correct.
How to check md5 on device
Install Root explorer - Navigate to file - long press and select - property. This will show many info including md5
Dr.Ketan Utilities
This application is built-in Dr.Ketan's Custom ROM. This application divided in four menu. Also note that you needs to install plug-in to work this app. On opening of app it will direct to play store to install plug in if your device lacking it.
1.Toggles - As name suggest here in this menu you will have many Toggles which you can use to activate/Deactivate services.
Single tap on icon to activate, Long click on icon to deactivate
Incoming Call Record - This will record all incoming calls. File will be saved in IntSD/Sounds/ folder. (If you dont have this folder then manually create it.)
Outgoing Call Record - This will record all Outgoing calls. File will be saved in IntSD/Sounds/ folder. (If you dont have this folder then manually create it.)
Auto GPS - Will Auto On/Off GPS with some commonly GPS using app
Auto Wifi - Auto switch off wifi if no active connection more than 10min
Auto Bluetooth - Auto switch off bluetooth if not actively paired more than 10min
Smart Network - Switch off data connection with 30sec of screen off, Auto ON with screen ON
Media scanner - To turn On/Off media scanner
Torch - Activate flash light with shaking of device with screen (home/Lock) ON Screen On + Shaking Kt to Rt - Torch ON, Screen Off - Torch Off, Torch ON + shaking device - Torch Off
LogIn security - silently capture image is multiple failed attempt to unlock device,pic stored in IntSD/DCIM/DrKetan_utilities/
Manual smart Power save - This is advanced power saving mode. you can manually activate anytime. This will restrict CPU to much lower level as well disconnect all radio,disable Active Sync, restrict BG process. If you have active connection with wifi/data when you activate this mod then it will enable data/wifi every 30min for 2min depends on wifi/data connection. e.g. If data connection was active while you activate this mode it will use data connection to check periodically. Also note that if you have activated Auto power save (read below) this mod will auto switch off auto connection and exiting manual mode, your auto mode will be activated again. Also note that when you exit manual mod all your radio and status like GPS,Wifi,Mobile data,Auto sync will be restored to previous stat when you have activated this mode.
This mod is idle when you want to save battery.
Auto Power saving mod - This is same as above said power saving mod but it will auto activate if your battery level goes below 25%. If you activate this mod while manual mod is ON, it will disable manual mode. This is idle for day to day use and will affect only battery level goes near critical.
CPU Ondemand Govern - This will use on demand govern for CPU and can be used day to day. May be you can feel slight less responsive while playing high ram using games. Truly i didn't notice much difference and can be used routinely, recommended to everyone for normal usage. Still you can deactivate any time when you needs full CPU.
If you are using CPU On demand govern and manually activate power saving mode OR If you have selected Auto power saving mode and battery level reach to 25% then CPU On demand govern will be suspended automatically and will be restored once you exit from power saving mode.
Tasks
Long press icon to apply.
EFS backup - Backup your EFS
EFS Restore - To restore EFS, Needs to keep efs.img file on intSD card root directory.
Data Fix - Just like Tb restore fix. Probably you won't require this on this ROM but still you can use if you have FCs after restoring app with titanium
IntSD fix - SOmetime you can't read/write on SD card (int/Ext) you can use this utility to fix issue
Flash Recovery
Flash Kernel
Flash Modem
You needs to put raw file on intSD root directory. like if you want to flash any modem, just extract modem.bin and keep in root directory of InntSD and long press Flash Modem icon and reboot. same way for recovery use recovery.img and for kernel use boot.img
Auto Scan This will Auto scan only while your device connected to AC charge. and disable when you remove from AC wall charger.
This is helpful to reduce battery consumption
Heating issue FIX - This will disable scanning and indexing which sometimes causing too much heating with bad file. Though it's not idle so;ution. you should find culprit causing issue and should remove it. But you can use this temporarily till you find solution.
ROM extra settings
PullUp Chooser
You can choose choose default application for each pullup mod
Launcher bootom
Launcher Side (only available in S5 launcher)
S Finder in Air command
S finder in Long pressing menu
Note that if you want to select default S Finder then you have to choose My Sfinder application.
Battery percent option
Battery Style
Meet Here/Car Parking
This is application very handy to find your car/ share location/Find location. This is complimentary for all this ROM user. Find more details here.
Help
Short guid lines and link to this post and develiper info.
Themes For KitKat Available 02/02/14
""""""Dark Chocolate""""""
For N900 / N9005 Kitkat 4 Firmware only
Download
Note to Change the background wallpaper to match the theme download from attached one of the file put in phone and install it using Xposed / Wanam xposed modular from > "Theme" > System Holo Dark Background" till I find out alternative
Theme 2, Hot Fudge
Download
Download
Sweeeeet!
Nice can't wait
Sent from my SM-N9005 using XDA Premium 4 mobile app
Nice to see you here!
Inviato dal mio GT-N5100 utilizzando Tapatalk
Bravooo
Great...Downloading...
Sorry you have to wait little longer for download.
Sent from my SM-N900 using xda premium
dr.ketan said:
Sorry you have to wait little longer for download.
Sent from my SM-N900 using xda premium
Click to expand...
Click to collapse
yeah was wondering where the download button is....
Nice to see you here man.
Envoyé de mon SM-N9005 en utilisant Tapatalk
dr.ketan said:
Sorry you have to wait little longer for download.
Sent from my SM-N900 using xda premium
Click to expand...
Click to collapse
Need mirror again?
That will be nice if you make mirror
Sent from my SM-N900 using xda premium
dr.ketan said:
Sorry you have to wait little longer for download.
Sent from my SM-N900 using xda premium
Click to expand...
Click to collapse
Is this for N9005 or N900 or both?
As title suggests it's for n900 only.
Sent from my SM-N900 using xda premium
Can't wait
Sent from my GT-I9505 using Tapatalk
Hello,
It's high time to publish my first beta release publicly of my app.
This app is currently designed for devices running Android Marshmallow and newer, backwards compatibility to Lollipop is going to be added in the next update. There is no Intro yet - work in progress.
REMEMBER YOU'RE USING THIS APP ON YOUR OWN RISK!
FUNCTIONS, ABOUT APP
The point is this app is to allow user to control when the hardware functions such as WiFi, Bluetooth etc are going to be turned off/on. In the current release there are 7 avaible functions:
5 for all devices, 2 for rooted devices.
In actions that contain "on/off" you have to specific exact action by clicking on the spinner to choose whether action is going to make a function on or off. If you don't do that, the default one will be choosen.
- Turn WiFi on/off: this sets up an alarm to turn WiFi on or off
- Turn off/on Bluetooth
- Turn off/on account sync
- Change screen brightness: 3 options avaible: dark screen, bright screen and custom value with preview avaible. You can modify dark and bright values in the settings (swipe from the edge right in the main layout of the app).
- Set loud/silent/ do not disturb mode: sets a specified volume mode
Root actions:
- Turn off device
- Reboot device
You will be asked for root permission, unless you give the permission action will not be either saved and performed.
PERMISSIONS:
In the first launch you will be asked to disable battery optimisation for this app, if you don't disable it may not work properly.
In the brightness section, you will be asked for allowing app to modify system settings - it's required to change brightness by the app.
Another permission you will be asked is to allow app to modify notifications - it's required if you would like to change phone volume mode (exactly do not disturb).
To delete planned actions:
There are currently 4 methods to delete planned actions, but the only one is to cancel the action:
- In upcoming events section, click on trash and then select items to delete and then hit trash one more time to delete
- Swipe left on item to delete
- Hit on the trash button, then click delete all
Those methods DO NOT cancel pending action
To cancel pending action:
- Click on an item you want to cancel, the editor will pop up
- Hit on the trash button, then the action will be canceled and item deleted.
Changelog:
Version 1.1:
- Optimised navigation drawer
- Fixed bluetooth service that did not update alarm
- New intro added
- Added backwards compatibility back to Lollipop
- After device is rebooted alarms are no longer cancelled - they are rescheduled if still valid
- Navigation drawer is now open for the first boot
- Now you can ask for permissions one more time from navigation drawer
- Fixed app icon not showing on some devices
Version 1.2
- Repeat every day function added
- Minor bugs fixed
- Updated Toasts messages
Version 1.3
-fixed delete all alarms button
-fixed daily alarms not being fired daily
-added repeating alarms to fire in week days
-if no day buttons are selected, even if repeat switch is checked,
alarm will fire once
Version 1.4
- fixed one time alarms not being triggered
- updated toast messages
- fixed date not being shown properly
Version 2.0
-fixed account sync turning on specified days instead of everyday
-fixed acc sync alarms not being fired after device reboot
-new UI - now there is no new activity opened, you can manage your alarm through one view
-turn on/off alarm - now you can manage if you alarm is valid or not
-now on item swiped cancels and deletes current alarm
DOWNLOAD:
Google Play: https://play.google.com/store/apps/details?id=dominik.kedziak.sloth_profilescheduler
Credits:
Icons made by Freepik from www.flaticon.com
Write down in the comments what functions would you love to see in the upcoming update.
Bests
If I put a future date in a profile, will it be repeated daily until that date? If not, how can I create a profile and repeat it daily? Thank you
jordirpz said:
If I put a future date in a profile, will it be repeated daily until that date? If not, how can I create a profile and repeat it daily? Thank you
Click to expand...
Click to collapse
I had a some issues in implementing repeat feature (likey in specific day) so current alarms are fired one time only.
So, currently there is no way to repeat alarms automaticly, only by creating a new one.
Anyway, I've added this to my todo list. I hope you will be able to use this feature by the next update
Hi, thanks for your work and the new features. Can you add that days of the week you want a created profile to be activated / deactivated ?. Thank you very much.
@jordipz working on that! Should be updated soon!
Thank you very much for the update.
I can see in my service app that airplane mode on/off exist.
Can you active this option?
Yes I was about to do, but I focused on making repeating alarms at first.
Now I'm taking up for modifying UI and adding non-root required services (e.g turning airplane mode, mobile data etc needs root access).
A set of modifications with the management of settings through the application offline settings
Installation
Code:
You can install both on the official firmware, and on the custom one, if on the custom one, then just select the necessary items except the magisk item
For official:
1. Flash through the official firmware odin
2. Then I personally go into the stock recovery and do two wipe - cache and date / factor, then turn it off and into firmware mode
3. From the firmware mode according to the model, flash through odin twrp from here
4. After logging in to TWRP, you can make the format date yes and reboot the recovery, but not necessarily if you have done point 2. - after (if there is no memory card - connect the phone to the computer and drop it into memory) throw the Mod + Al_pie_odex_ script into memory
5. Installing Mod + Al_pie_odex_ without wipes with a choice at this stage of the magisk item and settings without additional functions - reinstall the firmware
6. After reinstallation, some modifications are not applied, so once again we make a choice from the Mod + Al_pie_odex_ script and additionally install the dialer modification, but do not select the magisk item and do not enter the magisk, select settings without additional functions
7. After reinstallation for optimization and verification can be done through the settings - Reset data, the phone must re-install the firmware, but not necessarily
8. Now you can make settings with built-in additional functions and configure magisk (a magisk will appear in the menu, which will prompt you for actions)
9. To manage modifications (if you didn’t choose the built-in settings) install AutoSet_Mod + Al_pie_
Description
Code:
Added toglah in the notification panel including screen recording, in the settings the screen entry item is activated
Sound selection from two speakers, Bixby button actions and call selection
Call recording, without delay after the call, the background in the call
Trial is disabled in paid topics
Signature verification disabled
Full screen mode
Setting the height of the nav. Panel, closing applications with a long tap back
Sandwich job
Disable request to allow for usb
Multi-click action
Screen time
Screenshot in png format
Volume and brightness warnings disabled
Sim switch panel for dvuhsimochnikov
Setting the blur background for notifications
Universal widget
In the nav.panel on the right is a multitasking virtual screen off button (long tap - off menu, two short - camera) with a switch
Setting the clock in the status bar
In the status bar on the right, the off button with a switch
Background color and icons in the quick settings panel
Background setting in the Nav Bar, Shutdown Menu, Quick Settings Panel
Charge band in nav.panel
RAM in the blind
Used data with switch
Conditional forwarding window disabled
Increased auto-brightness speed
Choice of curtain S8, S9 or N8
Select services.jar and framework-res.apk according to the S8 + or S8 model
Extended shutdown menu + select the number of columns
Background settings in the ANM, scroll effect in the launcher
Background settings in weather + added static wallpapers in the weather and on the lock screen + moon phases - give the Weather application all the permissions and pictures to choose through the gallery
Background settings in the latest + Matrix animation - give the application the One UI main screen all permissions and images to choose through the gallery
AutoSet application without an icon on the desktop - run from the curtain provided the application is installed
Select settings with built-in and without built-in offline settings
Switching tracks on the screen off
RAM in the last
Attention - applications main screen and weather
Give all permissions!
Managing modifications can be selected from the installer:
embedded or AutoSet_icon_Mod+Al_pie
For firmware with base not lower than G95xFXXU4DSE4 - new base(Added English to Aroma Installer)
Download from Google - 28.05.2019
https://drive.google.com/open?id=11wRCjK-r-IPLSaXWUPOSiYZhTm1UGMOl
The dialer is here (the commands for them are already inserted into the built-in settings and AutoSet_Mod_Al_pie)
https://forum.xda-developers.com/galaxy-s8/themes/modifying-dialer-configuration-t3795870
Sorry for bad english - Google translator
Link to the Russian site 4PDA
https://4pda.ru/forum/index.php?s=&showtopic=821323&view=findpost&p=81496294
This version is deprecated. The new version is here
MCU version: MTCD_ХХХХ, MTCE_ХХХХ, MTCP_ХХХХ
Firmware version: 4.0.0 (01.02.2020)
Version of the latest OTA update: 4.2.2 (06.02.2022)
About firmware:
Firmware for car head units on the MTCD-MTCE platform with Rockchip PX5 (rk3368), PX6 (rk3399), PX30 (rk3326) processors and a screen resolution of 800x480, 1024x600 or 1280x720 based on Android 9 .
This is a further development of the Hal9k Mod v3 based on Android 8.
# Thanks AndroidAutoShop for the equipment provided for development.
The basic version of the firmware, in the form in which it is posted here, is distributed free of charge for private use and has no performance limitations
Commercial use of firmware or its parts and algorithms is prohibited
Any change to the firmware of the head unit is a potentially dangerous operation. Therefore, the Mod is provided on an “as is” basis. The author is not responsible for any possible negative consequences.
The main advantages of this firmware:
Stock design
High stability
Advanced functionality
Correction of existing errors and deficiencies in stock firmware
Customizability. All additions and modifications can be customized to your taste.
Changes are made directly in the application code, without using the Xposed framework
Increased responsiveness compared to the stock + the ability to independently improve this indicator
System requirements ( Settings> System> About device (About tablet) )
The model starts with px5 (rk3368) or px6 (rk3399) or px30 (rk3326_mid)
Android version starts with 9 or 8.0 or 6.0
The MCU version starts with MTCD or MTCE . Further there can be any letters, two, three, four - it does not matter.
"About device" screen samples
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It is also necessary to be able to enter the recovery mode.
Firmware Reviews:
Video review by Alex's Android Radio (English)
Video review by Alex's Android Radio (Deutsch)
Video review by ES. (Русский)
List of changes:
4.2.2 OTA-package (06.02.2022)
Fix for OK Google - App removed
Version 5 Notification
4.2.1 OTA-package (10.03.2021)
Minor bug fixes
Updated translations
4.2.0 OTA-package (06.09.2020)
Updated base firmware to version 202005
Minor bug fixes
Updated translations
4.1.0 OTA-package (25.07.2020)
Updated base firmware to version 201912
Changed rules for distributing processes by processor cores
This had a positive effect both on the system as a whole and on the GPS.
GPS starts working normally about a minute after waking up from prolonged (night) sleep
Added screen filter for additional screen dimming in night mode
For the convenience of controlling the brightness level in this mode, a slider has been added next to the daytime brightness
Added the ability to adjust the volume from third-party applications
Added configurable autostart of packages or activities and services after starting the OS
A new way to install additional launchers included in the firmware.
They are now installed as updates to the built-in launcher. The widgets are working fine.
If there are widgets in the folder with the launcher, then first you need to install them, and then the launcher
Replaced KGL and ZH launchers with HA and HA2. Added exclusive launcher from Alex's Android Radio
Other launchers not included in the firmware are located here
Fixed a bug with getting covers from some players and the Radio application
Added display of radio station logos on the widget in the built-in launcher
Added the ability to disable the display of pop-up messages over the launcher
Fixed a bug of restarting third-party applications that worked before going to sleep
Fixed image mirroring bug when switching from front to rear camera
Pressing the Fcam button again now closes the front camera app
Added the ability to disable the device shutdown message
Tap on the clock widget in the built-in launcher now starts the screensaver instead of the clock
Added GPS chip reset to factory defaults when GPS receiver advanced setting is disabled. Relevant for PX30
Updated ViPER4Android FX and GPS Test Plus apps
Updated translations
4.0.2 OTA-package (05.04.2020)
Added to "Advanced GPS receiver setup":
Possibility of a choice of frequency of measurements for the GPS receiver: 1,2,5 and 10 Hz
Ability to use BeiDou satellites instead of Glonass (only for PX5 and PX6)
The Navi button now switches between the navigation application and the last launched player, which is included in the "List of media players that should not work together"
Third-party applications can now set the time zone on the device. Tested on the latest version of Navitel 9.12.58
If the application has already been installed, then to enable this mode, you must reinstall it
Especially for BMW car owners, the function "Replacing key codes" from Mod v3 is returned
Added the ability to send media information from embedded applications to third-party widgets
Added the ability to control embedded media applications from third-party widgets
Added the ability to display logos of radio stations on the screen saver and in media widgets for the embedded radio app
Files with logos should be located in the Pictures/Radio folder created on the device’s internal memory
Format: PNG, JPG. Image sizes up to 320x320
File names: 10250.png (102.50 MHz) for the default group of radio stations. A10340.png, B10340.jpg, etc. (103.40 MHz) for other groups
A new design of pop-up messages with media information has been made
Added the ability to adjust the duration of the display of such messages
Added default album art for embedded media applications. You can replace them with yours in the settings.
Added the ability to include packages without a launcher in the white list
Fixed display of screen saver on devices where large font is selected in the settings
New in screen saver:
You can swap the indicators on the left and right
Added ability to select text color for indicators
In addition to Yandex.Weather, the temperature can be taken from Accuweather and Yahoo.Weather notifications
You can remove information about the track number from pop-up messages. This also affects the screen saver
Temperature and voltage now appear on the screen saver immediately after it starts
Fixed a bug in the rear view camera application, due to which the application crashed if you turn on the navigation bar
Pause for third-party media players when making a call or pressing the Mute button
4.0.1 OTA-package (09.01.2020)
Advanced configuration of the GPS receiver chip, which includes:
Use of Galileo and IMES satellite navigation systems in addition to existing ones. The number of visible satellites increased by about a third
Frequency of measurements of geolocation increased by 10 times. Navigation apps respond faster to changes in course or speed
The lag of the marker from the real position is reduced to the minimum, which means that navigation applications report faster about the upcoming maneuver
Enabled positioning acceleration AssistNow Autonomous. A cold start of the GPS receiver takes about one minute.
A dynamic navigation model is set - for cars, not for phones, as set by default
Any differential correction satellites are used
Unfortunately, not all of this works for PX30 devices, since they have a less functional GPS receiver chip
Updated GPS Test Plus application (see screenshot). The satellites marked in circles are GPS on the left of the screen and Galileo on the right
Ability to configure the speed of the USB OTG port (USB 2.0 or USB 1.1). This allows you to remove clicks that interfere with listening to music via USB DAC.
Ability to set default TTL in the range from 63 to 65
Ability to disable the Ethernet interface for using Wi-Fi without physically disconnecting the USB modem. Ability to configure Ethernet interface parameters
The ability to mirror the image from the front view camera by default. Useful for those who put a rear view camera on the front of the car.
Color selection for dynamic parking lines
The ability not to turn off the sound from other applications after launching the applications AV input and DVR
Gesture control and background playback enabled for the Video application
The ability to disable option "Mute button pauses playback"
Added a black list of applications that do not allow to start the screen saver. Now you can make the screen saver always run, except when the applications in the list are on the screen
The z-link application should work
Bugs fixed in the default launcher:
Now you can create widgets "Direct dial" and "Direct message". Both widgets will launch a phone call to the selected number
The radio frequency on the widget is not reset after changing the theme
Updated script from b-max for reconnecting freezing USB hubs
4.0.0 (24.11.2019)
Full root access is preinstalled (Magisk v20.1)
It is possible to write to system partitions, control access to applications, hide root from some applications, and install additional modules
The built-in update does not work on Rockchip devices.
Firmware is completely reodexed with optimization for the processor. This gives some increase in system speed.
Scrolling a long name in the phone book
Equalizer call button in Radio, Music and Video
New actions for buttons on the steering wheel, including double actions (example: the "Back" button will hang up when there is an active call)
All elements of the status bar are in the same style and change their color depending on the background color. All items can be disabled
Removed restriction on 4 icons in the status bar
Navi and F-Cam tiles added
Players added to the "List of media players that should not work together" no longer close when going to sleep
An alternative Equalizer has been added to OEM. It is installed as an update of the built-in Equalizer using the ApkInstaller application.
The interface shown in the screenshot appears only on devices with DSP !
Return to the stock version by removing updates in the properties of the "Amplifier" application
New screensavers
In applications, translation into different languages has been fixed and added (now 12 languages have been changed).
Thanks to our translation team:
de maus05, Toto1365, Ati_gangster
el grigoris_a
it mrgiaco, DanveRt
cs Bugscze
hr dankec2000
hu didu73
nl ZeroZorro
fr mykerinos1
sv kupa
es segu45
pl tomkam
ua DanveRt
Inherited from previous versions:
Added the ability to receive OTA updates via the Internet
Added Lada logo
Added support for init.d
You can put your scripts in the /etc/init.d folder and they will be launched at system startup
New default settings:
English language and date format, time zone CET
Screen saver timeout - 2 minutes, options added: 10 and 30 minutes
Watching video while driving - enabled
GPS time update - enabled
Navigation sound mode - mixing
Navigation mixing ratio - 2
Prohibition of connection to data services in roaming
Rreversing volume - 4
Screen brightness at night - 20%
Added the ability to adjust the speed at which the video will be disabled
Added auto tuning APN for Tele2
Deleted applications: System Tests and EasyConnected
Gmail, Google Speech Synthesizer, Google Maps and YouTube transferred from system applications to third-party
Now they can be simply deleted in Settings if they are not needed.
Added the latest Russian voice package for Google Speech Synthesizer. Speech synthesis works without a network connection
The latest Russian language pack for offline speech recognition is preinstalled
Added synchronization of Contacts and Calendar with Google account
Time zones updated to the latest version
Preinstalled ViPER4Android
Added the ability to change the ringtone to any of the ringtones in the folder (not for all Bluetooth modules)
Added the ability to change the default TTL to bypass restrictions on the distribution of the Internet from mobile devices
Added script from b-max for reconnecting freezing USB hubs
By default it is turned off, it can be turned on in the Mod Settings
Added ability to disable full-screen keyboard
Added the ability to transfer the status bar to the bottom of the screen (Experimental option)
A list of applications that have access to USB devices has been made
Allows you to get rid of the annoying request for access
In Launcher, the date is displayed in the format corresponding to the setting in the "Date and Time" menu
Added background for messages from CanBus app
Contacts application turned on
Contacts and Google applications now call via MTCDialer without additional settings
A list of applications that allow to start the screen saver has been made
You can add, for example, a third-party launcher or player
Added a white list of applications that do not close when going to sleep, with the ability to configure
A list of media players that restart after sleep has been made
I have included a PCRadio player on this list. Now it starts playback correctly after waking up from sleep, if it was started while going to sleep
In its settings, you must enable the switch "Resume playback when the application starts." You also need to remove it from the white list, if it was added to it.
Added the ability to disable restarting applications that worked before going to sleep
Made a list of navigational apps that muffle other sounds when playing voice prompts.
The list should include all navigation applications, including the one that is set by default to the Navi button.
Added the ability to assign the last launched navigation application to the Navi button, to switch between navigation and player
A separate list of navigation applications using the Speech Synthesizer has been made to muffle other sounds when playing voice prompts
To use it, you need to add the navigation application to the "List of navigational applications using TTS that muffle other sounds" and select "Text-to-speech engine that muffle other sounds"
Added volume control in the style typical of AV equipment from the 7floor module
Added the ability to display the volume control on top, in the middle or at the bottom of the screen
Added the ability to adjust the time during which the volume control remains on the screen after changing the volume value
A list of media players that should not work together has been made. This list is an addition to the corresponding system list.
If one of the players included in this list is launched, then the rest are closed
Added the ability to edit the list of applications that are switched by the Mode button
Added the ability to select applications that will run instead of stock apps. You can start your player with a button on the steering wheel
The size of the number on the volume control is increased and made white
Added items to Settings: Home app (launcher selection), Navigation bar (located on the left in some firmwares), Start navigation after boot, Mobile network and For developers
In Settings - About device, an item with system information has been added
An on-screen power button has been made in the status bar.
Single tap - start the screen saver.
Double tap - take a screenshot.
Triple tap - kill the active application.
Long press - shutdown menu.
Added items to the shutdown menu: Restart, Safe mode, Recovery mode
Added the ability to disable all elements of the status bar
Disabled by default: Home button, Storage icons, Volume and Screen brightness icons. The Back button is moved from right to left. All items are customizable
Added the ability to lock the device as on regular Android system
The lock is turned on after the device reboots or wakes up from sleep
You can also turn on the lock after starting the Android screensaver or manually from the shutdown menu
Added volume control depending on speed
Added display of pop-up messages with media information from third-party media players.
Third-party media players must be added to the appropriate list.
Added list of applications that will work in full screen mode (immersive mode)
In the Bluetooth application, the name field in the phone book is expanded
During a call, if you minimize the notification, the lower part of the screen remains clickable
Also, the notification does not overlap the status bar, if it is below
Added display of pop-up messages with information about the track played through A2DP
It is possible to adjust the size and color of the font and the duration of the message
In the Video application, the playlist is expanded and the replay is disabled by default
Sorting in alphabetical order, not case sensitive for lists of folders and tracks
In the Music application, the playlist is expanded and the replay is disabled by default
Added downloading lyrics from the network
The player is paused when an incoming call or pressing the Mute button
Sorted in alphabetical order, not case sensitive for lists of folders and tracks
Added display of pop-up messages with information about the track being played. It is possible to adjust the size and color of the font and the duration of the message
Skipped to the next folder in the list after playing the last track in the current folder in sequential playback mode
Added the transition to the previous/next folders by the buttons of the steering wheel seekdown/seekup and by a long tap on the screen buttons prev/next
Radio - the moving RDS text has been removed from the buttons of the saved stations. Added the ability to assign names to saved radio stations
If the name for the stored frequency has not been previously set, text from RDS is proposed.
Added display of pop-up messages with information about the radio station. It is possible to adjust the size and color of the font and the duration of the message
Added the ability to select a group of radio stations
If you are going to another place where other radio stations work, you can select another group and tune the stations again, and upon returning home, select the default group again and your settings will be restored
Added custom parking lines. Thanks for Incognito+
The functionality of Screensavers (Daydream) is included. This allows you to install any screensaver from the Play Market
In order for the Android screensaver to work, it must be turned on in the Mod Settings
A new screensaver has been added, which displays the time and date, information from players (not only stock ones), volume level, speed, as well as temperature and voltage if this data is available
To display the real temperature you need a CAN adapter and the presence of temperature in the status bar, and to display the voltage - MCU 2.93 and higher
It is possible to customize the appearance of the screen saver: colors, background image, maximum value for the speed indicator
There is a display of covers for most third-party players and radio station icons for PCRadio
For correct operation, I recommend adding your players to the "List of media players that should not work together"
There is a display of recommendations when moving along the route for Yandex.Navigator, Yandex.Maps, Google Maps, Sygic GPS Navigation & Maps
There is a temperature display from Yandex.Weather notification, if temperature data does not come from the CAN adapter
During the screen saver’s operation, the volume control is not shown
Added the ability to select from 12 regular screen savers
6 launchers and their widgets (AY, GS, HCT2, HCT3, KGL, ZH) have been added to OEM.
For Tasker fans, the ability to assign the numbers 1-9, 0, and the symbols * and # to the steering wheel buttons has been added.
Intent = "com.microntek.report.event"
Extra "type" = "key"
Extra "value" = button code.
Other changes aimed at improving stability and usability.
A lot of work has been done to provide support for new Android 9 firmware, although this is not visible from the outside.
The ideas of some improvements are taken from the module xposed-mtce-utils and other modules with permission of the author, MVG-V70. Thank him very much for that.
But implemented without using the Xposed framework.
Installation:
When switching from any other firmware, user data will be cleared automatically!
When upgrading from a previous version, wipe data is not required. But it is recommended if there are any problems.
For stable operation of the device, it is recommended to update the MCU firmware to the latest: 3.40 and higher, or to the latest version available for your device
You can obtain the MCU firmware from the seller of your HU or search in cs-x collection
Update from Android 9:
The installation is similar to a regular firmware update
Copy the firmware file update.zip to a USB flash drive / SD memory card formatted in FAT32
Insert a USB flash drive / SD memory card into the device
In the window that appears, click "Install"
After installation, the device will automatically restart one more time to complete the installation of Magisk.
When installing from a SD memory card, installation may take longer!
Update from Android 6, 8:
Requires updating the recovery version to Android 9
Simple and safe way: Use the application ModInstaller Pro (link to the application in the readme.txt file, which is located in the archive with the firmware or in my signature at the bottom of this post)
Complicated and unsafe way: look for information in this thread
Update from Android 8 with saving data:
Only for PX5 devices!
The archive contains 2 special packages that can be used to switch from Android 8 without data loss
Connect to the HU with Android 8 firmware (Mod v3.x) one USB flash drive formatted in FAT32.
There should be enough free space on the flash drive to save the device’s internal storage
Install the package update.zip from the folder backup8 from the same flash drive or from the SD card
A multivolume archive with your data (userdata*) will be created on the USB flash drive.
Install mod v4.x by the method above
After the full installation of Android 9, connect a USB flash drive with archive to the HU
Install the package update.zip from the folder restore9 from the same flash drive or from the SD card
Reboot the HU.
The first boot of Android 9 after restoring the archive from Android 8 may last longer than usual. The system needs time to convert data
This method does not guarantee full functionality of all third-party applications that were installed in Android 8.
If you encounter any problems - reset device to factory settings
Additions:
EasyConnected from stock firmware
Automatic backlight control for PX5-based head units
Internet speed in status bar
Autostart applications
FAQ:
Q: How to get OTA updates?
A: Information is on my site. You will find the link in the archive with firmware or in my signature at the bottom of this post
Q: How to automatically install my applications after installing the firmware?
A: Create the hct folder on the flash drive with the firmware, the apk folder in it and put your apk in it. They will be automatically installed after the installing the firmware.
Q: How to connect the OBD adapter?
A: This can be done both from the Bluetooth application, and from the Bluetooth item in the settings. The main thing - before you click on the adapter found, you must wait until the scan finished. Wait until the spinning circle disappears in the Bluetooth application or until the inscription "Search..." changes to the inscription "Refresh" in Settings. Then pairing goes smoothly. If the phone is already connected, you will need to temporarily disconnect it.
Q: How to start any application from a button on the steering wheel?
A: Mod settings - Manage applications - Applications that run instead of the stock . Assign any of the six applications that you don’t use to the button, then choose a replacement for it in the form of some kind of player, for example. This button will start your player
Q: Bluetooth MD725 does not work, although everything worked in Android 6!
A: If the MD725 type 2 Bluetooth module is installed in your HU, then it will not work in Android 9. The reason is that its driver was removed from Android 9.
Q: How do I know if I have such a Bluetooth module?
A: On the first page of the factory settings, in item BT, MD725 is selected. The getprop bt.md725.type command executed in the terminal answers "2"
Solution: replace the module with type 1
Q: Bluetooth SD-968 does not work, although everything worked in Android 8!
A: If the SD-968 Bluetooth module with firmware made in March 2017 or earlier is installed in your HU, then it works in Android 8, but does not work in Android 9.
Solution: replace the module driver /system/bin/sdsdk968 with the old version. Do not forget to set permissions 755 on the file.
Or replace the module with another type
Known Issues:
Mod is a modified factory firmware.
I can only be responsible for the changes in the device that I made. All of them are listed in the "List of changes" section.
Everything else, both good and bad, is inherited from the factory firmware.
I try to fix bugs found in the stock, but this I can’t always do it.
If you do not agree with this, do not install this firmware.
On some devices with a PX5 processor, the screen backlight sometimes does not turn on after exiting sleep mode.
After rebooting the device with the RST button or turning off the ignition for about 20-30 seconds, it continues to work.
The same problem exists on the stock and on newer version of the stock
Download:
PX5: Google Drive
PX6: Google Drive
PX30: Google Drive
If you want to help translate Mod into your language, please open this folder.
When you decide to place your translation in this folder, send me a personal message with your Google email. I will give you access.
If you think we need to translate other applications, write to me about it. I will add resources to the folder.
Version 4.0 screenshots
Version 4.0 screenshots
4.0.2 - 4.1.0 screenshots
Nice to see a dedicated English thread for this ROM here.Been waiting for this for a long time.
In regard to the ROM, nothing to say because it´s amazing. Been using this since Dec and have only had a black screen twice till date. With the stock Rom, i have this every week. So this is an improvement.
the only issue i have is my default music player 50% of the time dont automatically continue playing after waking up from sleep.
Good job Hal9k
Congratulations @Hal9k_ for this fantastic ROM....glad to know the english thread finally is here..
Enviado desde mi SM-G975F mediante Tapatalk
Thanks for starting new thread for Mod 4
Like to give some infos and suggestions about the newest Mod 4. My headunit is a PX5 from Dasaita with 4GB/32GB. Originally bought with Android 8. Installed in a Honda HRV 2016.
Until now I've found some issues in this rom. Generally it's working really well.
radio app: the field for the RDS text is imho too small. No chance to get any info from this tiny scrolling text while driving. Better redesign the app and place the RDS text below the frequency band with full width (see screenshot).
radio app: in night mode the additional settings (stereo, local, FMx..) in the right circle, where the frequeny or channel name is visible, cannot be seen because the fontcolor doesn't change with day/night mode. It's the same darkgrey like in day mode (see screenshot).
screen saver: the font for speed and volume looks very digitally ugly (old style) and is hard to read. Better use the same font like for the time.
sleep mode. I used the auto sleep mode to get the fast boot up. But now I had to replace a 10 month old battery of the car. Seems the rom takes to much energy while sleeping? Can you check this to be sure it's no problem in the rom? In the moment I'm using the complete shutdown to avoid problems. Also other people mentioned this topic.
Hal9k_ said:
Firmware version: 4.0.0 (01.02.2020) rebuild
MCU version: MTCD_ХХХХ, MTCE_ХХХХ
About firmware:
Firmware for car head units on the MTCD-MTCE platform with Rockchip PX5 (rk3368), PX6 (rk3399), PX30 (rk3326) processors and a screen resolution of 800x480, 1024x600 or 1280x720 based on Android 9 .
This is a further development of the Hal9k Mod v3 based on Android 8.
# Thanks AndroidAutoShop for the equipment provided for development.
The basic version of the firmware, in the form in which it is posted here, is distributed free of charge for private use and has no performance limitations
Commercial use of firmware or its parts and algorithms is prohibited
Any change to the firmware of the head unit is a potentially dangerous operation. Therefore, the Mod is provided on an “as is” basis. The author is not responsible for any possible negative consequences.
The main advantages of this firmware:
Stock design
High stability
Advanced functionality
Correction of existing errors and deficiencies in stock firmware
Customizability. All additions and modifications can be customized to your taste.
Changes are made directly in the application code, without using the Xposed framework
Increased responsiveness compared to the stock + the ability to independently improve this indicator
System requirements ( Settings> System> About device (About tablet) )
The model starts with px5 (rk3368) or px6 (rk3399) or px30 (rk3326_mid)
Android version starts with 9 or 8.0 or 6.0
The MCU version starts with MTCD or MTCE . Further there can be any letters, two, three, four - it does not matter.
"About device" screen samples
View attachment 4943947View attachment 4943949View attachment 4943951
It is also necessary to be able to enter the recovery mode.
Firmware Reviews:
Video review by Alex's Android Radio (English)
Video review by Alex's Android Radio (Deutsch)
Video review by ES. (Русский)
List of changes:
4.0.1 OTA-package (09.01.2020)
Advanced configuration of the GPS receiver chip, which includes:
Use of Galileo and IMES satellite navigation systems in addition to existing ones. The number of visible satellites increased by about a third
Frequency of measurements of geolocation increased by 10 times. Navigation apps respond faster to changes in course or speed
The lag of the marker from the real position is reduced to the minimum, which means that navigation applications report faster about the upcoming maneuver
Enabled positioning acceleration AssistNow Autonomous. A cold start of the GPS receiver takes about one minute.
A dynamic navigation model is set - for cars, not for phones, as set by default
Any differential correction satellites are used
Unfortunately, not all of this works for PX30 devices, since they have a less functional GPS receiver chip
Updated GPS Test Plus application (see screenshot). The satellites marked in circles are GPS on the left of the screen and Galileo on the right
Ability to configure the speed of the USB OTG port (USB 2.0 or USB 1.1). This allows you to remove clicks that interfere with listening to music via USB DAC.
Ability to set default TTL in the range from 63 to 65
Ability to disable the Ethernet interface for using Wi-Fi without physically disconnecting the USB modem. Ability to configure Ethernet interface parameters
The ability to mirror the image from the front view camera by default. Useful for those who put a rear view camera on the front of the car.
Color selection for dynamic parking lines
The ability not to turn off the sound from other applications after launching the applications AV input and DVR
Gesture control and background playback enabled for the Video application
The ability to disable option "Mute button pauses playback"
Added a black list of applications that do not allow to start the screen saver. Now you can make the screen saver always run, except when the applications in the list are on the screen
The z-link application should work
Bugs fixed in the default launcher:
Now you can create widgets "Direct dial" and "Direct message". Both widgets will launch a phone call to the selected number
The radio frequency on the widget is not reset after changing the theme
Updated script from b-max for reconnecting freezing USB hubs
4.0.0 (24.11.2019)
Full root access is preinstalled (Magisk v20.1)
It is possible to write to system partitions, control access to applications, hide root from some applications, and install additional modules
Firmware is completely reodexed with optimization for the processor. This gives some increase in system speed.
Scrolling a long name in the phone book
Equalizer call button in Radio, Music and Video
New actions for buttons on the steering wheel, including double actions (example: the "Back" button will hang up when there is an active call)
All elements of the status bar are in the same style and change their color depending on the background color. All items can be disabled
Removed restriction on 4 icons in the status bar
Navi and F-Cam tiles added
Players added to the "List of media players that should not work together" no longer close when going to sleep
An alternative Equalizer has been added to OEM. It is installed as an update of the built-in Equalizer using the ApkInstaller application.
Return to the stock version by removing updates in the properties of the "Amplifier" application
New screensavers
In applications, translation into different languages has been fixed and added (now 12 languages have been changed).
Thanks to our translation team:
de maus05, Toto1365, Ati_gangster
el grigoris_a
it mrgiaco, DanveRt
cs Bugscze
hr dankec2000
hu didu73
nl ZeroZorro
fr mykerinos1
sv kupa
es segu45
pl tomkam
ua DanveRt
Inherited from previous versions:
Added the ability to receive OTA updates via the Internet
Added Lada logo
Added support for init.d
You can put your scripts in the /etc/init.d folder and they will be launched at system startup
New default settings:
English language and date format, time zone CET
Screen saver timeout - 2 minutes, options added: 10 and 30 minutes
Watching video while driving - enabled
GPS time update - enabled
Navigation sound mode - mixing
Navigation mixing ratio - 2
Prohibition of connection to data services in roaming
Rreversing volume - 4
Screen brightness at night - 20%
Added the ability to adjust the speed at which the video will be disabled
Added auto tuning APN for Tele2
Deleted applications: System Tests and EasyConnected
Gmail, Google Speech Synthesizer, Google Maps and YouTube transferred from system applications to third-party
Now they can be simply deleted in Settings if they are not needed.
Added the latest Russian voice package for Google Speech Synthesizer. Speech synthesis works without a network connection
The latest Russian language pack for offline speech recognition is preinstalled
Added synchronization of Contacts and Calendar with Google account
Time zones updated to the latest version
Preinstalled ViPER4Android
Added the ability to change the ringtone to any of the ringtones in the folder (not for all Bluetooth modules)
Added the ability to change the default TTL to bypass restrictions on the distribution of the Internet from mobile devices
Added script from b-max for reconnecting freezing USB hubs
By default it is turned off, it can be turned on in the Mod Settings
Added ability to disable full-screen keyboard
Added the ability to transfer the status bar to the bottom of the screen (Experimental option)
A list of applications that have access to USB devices has been made
Allows you to get rid of the annoying request for access
In Launcher, the date is displayed in the format corresponding to the setting in the "Date and Time" menu
Added background for messages from CanBus app
Contacts application turned on
Contacts and Google applications now call via MTCDialer without additional settings
A list of applications that allow to start the screen saver has been made
You can add, for example, a third-party launcher or player
Added a white list of applications that do not close when going to sleep, with the ability to configure
A list of media players that restart after sleep has been made
I have included a PCRadio player on this list. Now it starts playback correctly after waking up from sleep, if it was started while going to sleep
In its settings, you must enable the switch "Resume playback when the application starts." You also need to remove it from the white list, if it was added to it.
Added the ability to disable restarting applications that worked before going to sleep
Made a list of navigational apps that muffle other sounds when playing voice prompts.
The list should include all navigation applications, including the one that is set by default to the Navi button.
Added the ability to assign the last launched navigation application to the Navi button, to switch between navigation and player
A separate list of navigation applications using the Speech Synthesizer has been made to muffle other sounds when playing voice prompts
To use it, you need to add the navigation application to the "List of navigational applications using TTS that muffle other sounds" and select "Text-to-speech engine that muffle other sounds"
Added volume control in the style typical of AV equipment from the 7floor module
Added the ability to display the volume control on top, in the middle or at the bottom of the screen
Added the ability to adjust the time during which the volume control remains on the screen after changing the volume value
A list of media players that should not work together has been made. This list is an addition to the corresponding system list.
If one of the players included in this list is launched, then the rest are closed
Added the ability to edit the list of applications that are switched by the Mode button
Added the ability to select applications that will run instead of stock apps. You can start your player with a button on the steering wheel
The size of the number on the volume control is increased and made white
Added items to Settings: Home app (launcher selection), Navigation bar (located on the left in some firmwares), Start navigation after boot, Mobile network and For developers
In Settings - About device, an item with system information has been added
An on-screen power button has been made in the status bar.
Single tap - start the screen saver.
Double tap - take a screenshot.
Triple tap - kill the active application.
Long press - shutdown menu.
Added items to the shutdown menu: Restart, Safe mode, Recovery mode
Added the ability to disable all elements of the status bar
Disabled by default: Home button, Storage icons, Volume and Screen brightness icons. The Back button is moved from right to left. All items are customizable
Added the ability to lock the device as on regular Android system
The lock is turned on after the device reboots or wakes up from sleep
You can also turn on the lock after starting the Android screensaver or manually from the shutdown menu
Added volume control depending on speed
Added display of pop-up messages with media information from third-party media players.
Third-party media players must be added to the appropriate list.
Added list of applications that will work in full screen mode (immersive mode)
In the Bluetooth application, the name field in the phone book is expanded
During a call, if you minimize the notification, the lower part of the screen remains clickable
Also, the notification does not overlap the status bar, if it is below
Added display of pop-up messages with information about the track played through A2DP
It is possible to adjust the size and color of the font and the duration of the message
In the Video application, the playlist is expanded and the replay is disabled by default
Sorting in alphabetical order, not case sensitive for lists of folders and tracks
In the Music application, the playlist is expanded and the replay is disabled by default
Added downloading lyrics from the network
The player is paused when an incoming call or pressing the Mute button
Sorted in alphabetical order, not case sensitive for lists of folders and tracks
Added display of pop-up messages with information about the track being played. It is possible to adjust the size and color of the font and the duration of the message
Skipped to the next folder in the list after playing the last track in the current folder in sequential playback mode
Added the transition to the previous/next folders by the buttons of the steering wheel seekdown/seekup and by a long tap on the screen buttons prev/next
Radio - the moving RDS text has been removed from the buttons of the saved stations. Added the ability to assign names to saved radio stations
If the name for the stored frequency has not been previously set, text from RDS is proposed.
Added display of pop-up messages with information about the radio station. It is possible to adjust the size and color of the font and the duration of the message
Added the ability to select a group of radio stations
If you are going to another place where other radio stations work, you can select another group and tune the stations again, and upon returning home, select the default group again and your settings will be restored
Added custom parking lines. Thanks for Incognito+
The functionality of Screensavers (Daydream) is included. This allows you to install any screensaver from the Play Market
In order for the Android screensaver to work, it must be turned on in the Mod Settings
A new screensaver has been added, which displays the time and date, information from players (not only stock ones), volume level, speed, as well as temperature and voltage if this data is available
To display the real temperature you need a CAN adapter and the presence of temperature in the status bar, and to display the voltage - MCU 2.93 and higher
It is possible to customize the appearance of the screen saver: colors, background image, maximum value for the speed indicator
There is a display of covers for most third-party players and radio station icons for PCRadio
For correct operation, I recommend adding your players to the "List of media players that should not work together"
There is a display of recommendations when moving along the route for Yandex.Navigator, Yandex.Maps, Google Maps, Sygic GPS Navigation & Maps
There is a temperature display from Yandex.Weather, if temperature data does not come from the CAN adapter
During the screen saver’s operation, the volume control is not shown
Added the ability to select from 12 regular screen savers
6 launchers and their widgets (AY, GS, HCT2, HCT3, KGL, ZH) have been added to OEM.
To install the launcher:
Run the ApkInstaller application, Install - OEM - Launcher code (for example, AY) - install .apk file
Press Home - the request "Use LaucherXX as Home" appears
Select the installed launcher and click "Just once" or "Always."
In the latter case, this question will no longer appear, a new launcher will always be used.
To install launcher widgets, you must:
Install .apk widgets and launcher
Add any widget to your desktop
Give permission (see screenshot).
Delete the launcher and reinstall (or clear the launcher data)
For Tasker fans, the ability to assign the numbers 1-9, 0, and the symbols * and # to the steering wheel buttons has been added.
Intent = "com.microntek.report.event"
Extra "type" = "key"
Extra "value" = button code.
Other changes aimed at improving stability and usability.
A lot of work has been done to provide support for new Android 9 firmware, although this is not visible from the outside.
The ideas of some improvements are taken from the module xposed-mtce-utils and other modules with permission of the author, MVG-V70. Thank him very much for that.
But implemented without using the Xposed framework.
Installation:
When switching from any other firmware, user data will be cleared automatically!
When upgrading from a previous version, wipe data is not required. But it is recommended if there are any problems.
For stable operation of the device, it is recommended to update the MCU firmware to the latest: 3.40 and higher, or to the latest version available for your device
You can obtain the MCU firmware from the seller of your HU or search in cs-x collection
Update from Android 9:
The installation is similar to a regular firmware update
Copy the firmware file update.zip to a USB flash drive / SD memory card formatted in FAT32
Insert a USB flash drive / SD memory card into the device
In the window that appears, click "Install"
After installation, the device will automatically restart one more time to complete the installation of Magisk.
When installing from a SD memory card, installation may take longer!
Update from Android 6, 8:
Requires updating the recovery version to Android 9
Simple and safe way: Use the application ModInstaller Pro (link to the application in the readme.txt file, which is located in the archive with the firmware or in my signature at the bottom of this post)
Complicated and unsafe way: look for information in this thread
Update from Android 8 with saving data:
Only for PX5 devices!
The archive contains 2 special packages that can be used to switch from Android 8 without data loss
Connect to the HU with Android 8 firmware (Mod v3.x) one USB flash drive formatted in FAT32.
There should be enough free space on the flash drive to save the device’s internal storage
Install the package update.zip from the folder backup8 from the same flash drive or from the SD card
A multivolume archive with your data (userdata*) will be created on the USB flash drive.
Install mod v4.x by the method above
After the full installation of Android 9, connect a USB flash drive with archive to the HU
Install the package update.zip from the folder restore9 from the same flash drive or from the SD card
Reboot the HU.
The first boot of Android 9 after restoring the archive from Android 8 may last longer than usual. The system needs time to convert data
This method does not guarantee full functionality of all third-party applications that were installed in Android 8.
If you encounter any problems - reset device to factory settings
Additions:
EasyConnected from stock firmware
Automatic backlight control for PX5-based head units
Internet speed in status bar
Autostart applications
FAQ:
Q: How to get OTA updates?
A: Information is on my site. You will find the link in the archive with firmware or in my signature at the bottom of this post
Q: How to automatically install my applications after installing the firmware?
A: Create the hct folder on the flash drive with the firmware, the apk folder in it and put your apk in it. They will be automatically installed after the installing the firmware.
Q: How to connect the OBD adapter?
A: This can be done both from the Bluetooth application, and from the Bluetooth item in the settings. The main thing - before you click on the adapter found, you must wait until the scan finished. Wait until the spinning circle disappears in the Bluetooth application or until the inscription "Search..." changes to the inscription "Refresh" in Settings. Then pairing goes smoothly. If the phone is already connected, you will need to temporarily disconnect it.
Q: How to start any application from a button on the steering wheel?
A: Mod settings - Manage applications - Applications that run instead of the stock . Assign any of the six applications that you don’t use to the button, then choose a replacement for it in the form of some kind of player, for example. This button will start your player
Q: Bluetooth MD725 does not work, although everything worked in Android 6!
A: If the MD725 type 2 Bluetooth module is installed in your HU, then it will not work in Android 9. The reason is that its driver was removed from Android 9.
Q: How do I know if I have such a Bluetooth module?
A: On the first page of the factory settings, in item BT, MD725 is selected. The [color = darkblue] getprop bt.md725.type [/color] command executed in the terminal answers "2"
Solution: replace the module with type 1
Q: Bluetooth SD-968 does not work, although everything worked in Android 8!
A: If the SD-968 Bluetooth module with firmware made in March 2017 or earlier is installed in your HU, then it works in Android 8, but does not work in Android 9.
Solution: replace the module driver /system/bin/sdsdk968 with the old version. Do not forget to set permissions 755 on the file.
Or replace the module with another type
Known Issues:
Mod is a modified factory firmware.
I can only be responsible for the changes in the device that I made. All of them are listed in the "List of changes" section.
Everything else, both good and bad, is inherited from the factory firmware.
I try to fix bugs found in the stock, but this I can’t always do it.
If you do not agree with this, do not install this firmware.
On some devices with a PX5 processor, the screen backlight sometimes does not turn on after exiting sleep mode.
After rebooting the device with the RST button or turning off the ignition for about 20-30 seconds, it continues to work.
The same problem exists on the stock and on newer version of the stock
Download:
PX5: Google Drive
PX6: Google Drive
PX30: Google Drive
Version 4.0 screenshots
Click to expand...
Click to collapse
Fantastic work @Hal9k_
I've just had a look at your website and saw the below, which seems to suggest that this base version is free, but to receive updates, you must pay; that is all (OTA) updates are paid for - is that correct? Or will you be releasing updates here, without payment? Please clarify.
Hal9k_ said:
If you want to support my project and receive timely online updates (OTA), subscribe to them here. This is the only way to get updates for the current version.
To do this, pay the indicated amount using one of the methods below.
Click to expand...
Click to collapse
I could be wrong, but are you saying the only way to get version v4.0.1 is to pay to receive the update via OTA? How about all future updates, those too paid?
Manfred.62 said:
Thanks for starting new thread for Mod 4
radio app: the field for the RDS text is imho too small. No chance to get any info from this tiny scrolling text while driving. Better redesign the app and place the RDS text below the frequency band with full width (see screenshot).
radio app: in night mode the additional settings (stereo, local, FMx..) in the right circle, where the frequeny or channel name is visible, cannot be seen because the fontcolor doesn't change with day/night mode. It's the same darkgrey like in day mode (see screenshot).
Click to expand...
Click to collapse
I agree in 100%. The radio player is a definite failure. I did not think that there could be a worse radio application than the one I had pre-installed, and it seems that it could be worse. In addition, the whole due to the low contrast between panels / fonts gives the impression as if it was created in low resolution.
marchnz said:
Fantastic work @Hal9k_
I've just had a look at your website and saw the below, which seems to suggest that this base version is free, but to receive updates, you must pay; that is all (OTA) updates are paid for - is that correct?
Or will you be releasing updates here, without payment? Please clarify.
I could be wrong, but are you saying the only way to get version v4.0.1 is to pay to receive the update via OTA? How about all future updates, those too paid?
Click to expand...
Click to collapse
On the russian forum is clear. This thread is just a replica of the russsian one ...but in english.
Only 4.0.0 version is free.
All the upgrades will be in form of OTA updates and only paying the 10usd (one unique payment) you can be able to get them.
If major update (like android 10) comes...I suppose he will create a mod 5.0.0 for free and OTA updates again by the same previous subscription (no other payment for 5.x.x upgrades if you were subscribed to 4.x.x)
Am I correct?
Enviado desde mi SM-G975F mediante Tapatalk
I am fine with paykng for support. I already sent serial number and paid just reading how to upgrade to 4.0 I have latest 3 hal9 is that andriod 8 don't care about keeping settings apps ect so I flash via sd card and I am done? It's will come auto after that?
Love this program has kept the px5 alive and looking forward to more
---------- Post added at 04:12 AM ---------- Previous post was at 03:55 AM ----------
Mod pro paid to oh well didn't want to save info anyways. How do I know my it will work sent payment no confirmation or anything sent via mail?
Hi everyone I ask you a little help. I tried to install on my erisin px5 modinstaller bro purchased from Hal. after installing the recovery with the Android 9 option the display remains black and the illuminated keys and the radio no longer starts. Can anyone tell me how to solve? thank you
Sorry for english
Right, i think it was 10 Dollars, then you get a serial wich you have to set to get OTA-updates.
I have payd both, Malaysk an Hal9k_ because both have deserved it.
Regards
Manfred.62 said:
sleep mode. I used the auto sleep mode to get the fast boot up. But now I had to replace a 10 month old battery of the car. Seems the rom takes to much energy while sleeping? Can you check this to be sure it's no problem in the rom? In the moment I'm using the complete shutdown to avoid problems. Also other people mentioned this topic.
Click to expand...
Click to collapse
This will be coincidence rather than cause. Was the battery flat at any time? Can leave my car sitting idle for weeks with auto sleep mode and the battery holds just fine. Auto sleep mode hardly consumes power.
Thank you very much for opening a thread where the px6 is included with this Rom, I have installed the full version and so far it is luxurious, until now and since I put it on, I have not observed any fault attributable to the Hal9k, I have a fault but it is hardware already that for a while and for no apparent reason, it crashes when starting, it remains in the cameras without any speed stuck in the car, then it returns with normal operation and occasionally the camera comes out again.
As I have been able to verify, it gives me that it is the motherboard, I have already spoken with the Chinese and, in guarantee, it sends it to me.
With respect to hal9k, as I said, everything is correct, right now without failures.
Many thanks to hal9k for making a good rom and to @ segu45 in this case for their Spanish translations.
Sorry for my English
Greetings.
---------- Post added at 01:11 PM ---------- Previous post was at 01:00 PM ----------
ikerg said:
On the russian forum is clear. This thread is just a replica of the russsian one ...but in english.
Only 4.0.0 version is free.
All the upgrades will be in form of OTA updates and only paying the 10usd (one unique payment) you can be able to get them.
If major update (like android 10) comes...I suppose he will create a mod 5.0.0 for free and OTA updates again by the same previous subscription (no other payment for 5.x.x upgrades if you were subscribed to 4.x.x)
Am I correct?
Enviado desde mi SM-G975F mediante Tapatalk
Click to expand...
Click to collapse
Well, as I understand it, it is as you indicate, you pay € 10 and the updates that come will no longer have to make any more payments.
I do not know if when I can Android 10 if it is possible, we will have to pay again since I understand that it will be a full Rom and not a mod.
However, as far as I know, with that one payment, for the moment everything that is going out, is coming via OTA to all those who have paid.
Greetings.
With version 4.0.1, I can continue to play audio even when switching to AV In. However, when I get out of AV In my SWC for skipping songs no longer works. Only restarting the unit fixes the problem. I'm on a PX6 unit for reference
@Manfred.62
I'll think about the Radio app
I didn't change anything about sleep mode.
@marchnz
There, on the site, it is written:
The code will continue to work all the time while I make updates for this version of the Mod.
"this version" is Mod v4.
Perhaps in the future a new free version will be released with all the changes that will be made by then, if a new version of the stock firmware appears and I decide to do it. But I can’t promise it for sure.
@ikerg
The thread is dedicated to Mod v4. Won't look that far.
@scoote2014
I usually reply to emails in the evening, Moscow time.
@mrtony95
Tony, I read in my email that you've already done everything yourself. Is that so ?
@Realistichat
I couldn't reproduce it. Make a video
I have a problem with the installation of the update. I have a px5 MTCE device, unfortunately it throws out an error as in the picture.
Does anyone have any idea how to solve it?
MCU
Hi, i have this model of PX5:
https://pl.aliexpress.com/item/32848518906.html?spm=a2g0s.9042311.0.0.27425c0fAao1In
Wich MCU should I install? MTCE GS 3.4? Actually I have Mtcd_gs_v2.9c
ModInstaller Pro
Hello, good afternoon, I made the donation but I don't know how to get ModInstaller Pro for updating my equipment.
can you help me
thanks
tricz said:
I have a problem with the installation of the update. I have a px5 MTCE device, unfortunately it throws out an error as in the picture.
Does anyone have any idea how to solve it?
Click to expand...
Click to collapse
Hi,,
"rk3368" is PX6... so you have downloaded the mod for PX6-Devices, but you own a PX5-Device. Download the right package, copy it to your USB or SD ans install
Yours
Markus
---------- Post added at 05:45 PM ---------- Previous post was at 05:43 PM ----------
j-miguelr said:
Hello, good afternoon, I made the donation but I don't know how to get ModInstaller Pro for updating my equipment.
can you help me
thanks
Click to expand...
Click to collapse
Hi,
you will get a mail from hal9k with a link to your personal modinstaller-apk. Download, move it to your device (USB / S-Card) and install...
Hal9k Mod v5 based on Android 10 for MTCx HCTx Rockchip PX5 (rk3368), PX6 (rk3399) and PX30 (rk3326) head units
Compatible MCU versions: MTCD_XXXX, MTCE_XXXX, MTCP_XXXX, MTCH_XXXX, HCTG_XXXX
Firmware version: 5.0.0 (31.07.2021)
Version of the latest OTA update: 5.2.0 (20.12.2022)
About firmware:
Firmware for car head units based on MTCx or HCTx platform with Rockchip PX5, PX6 or PX30 processors and screen resolution 800x480, 1024x600, 1280x720, 1920x1080 based on Android 10.
This is a further development of the Hal9k Mod v4 based on Android 9.
The basic version of the firmware, in the form in which it is posted here, is distributed free of charge for private use and has no restrictions on performance
Commercial use of the firmware or its parts and algorithms is prohibited.
Any change to the firmware of the head unit is a potentially dangerous operation. Therefore, the Mod is provided on an “as is” basis. The author is not responsible for any possible negative consequences.
The main advantages of this firmware:
Stock design
High stability
Advanced functionality
Correction of existing errors and deficiencies in stock firmware
Customizability. All additions and modifications can be customized to your liking
Changes are made directly in the application code, without using the Xposed framework
Increased responsiveness compared to the stock + the ability to independently improve this indicator
System requirements ( Settings> About machine)
The model starts with PX5 (rk3368) or PX6 (rk3399) or PX30 (rk3326_mid)
Android version starts with 10 or 9 or 8.0 or 6.0
The MCU version starts with MTCD, MTCE, MTCP, MTCH, HCTG. Further there can be any letters, two, three, four - it does not matter.
Spoiler: "About machine" screen samples
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You also need to be able to enter the recovery mode
Firmware Reviews:
Video installation instructions from Alex's Android Radio (English)
Video installation instructions from Alex's Android Radio (Deutsch)
Video review from Alex's Android Radio (English)
Video review from Alex's Android Radio (Deutsch)
Spoiler: List of changes:
Spoiler: 5.2.0 ОТА-package (20.12.2022) update size about 129Mb
Updated base firmware to version 202211, which supports new types of displays, bluetooth and wi-fi modules and contains ZLink 5
Fixed the problem of application crashes that occurred after installing the current versions of WebView
Fixed the "empty Radio" problem
Fixed the connection to ELM for the BC5 Bluetooth module driver
Fixed video streaming to Chromecast devices (for instrument screens)
Launch Google Go instead of Google if this app is installed
New translations
Spoiler: 5.1.0 ОТА-package (30.01.2022) update size about 128Mb
Updated base firmware to version 202111
Updated Magisk to version 23
The Installer now has the ability to install applications from the Internet cloud, which hosts 35 regular and 4 widescreen launchers
Launchers are installed as updates to the built-in launcher
If there are widgets next to the launcher, then you first need to install them, and then the launcher
To uninstall launcher updates, use Mod Settings > Application Management > Uninstall Launcher Updates
Added support for devices with a rotating screen
Added tiles in the notification bar to disable the Ethernet interface and reboot the device
Added the ability to launch the screen saver and video player using the buttons on the steering wheel
Added the ability to replace the video player, which is launched using the button on the steering wheel
Added a new Italian-style screen saver
Fixed launching the screen saver using the on-screen power button
Fixed option to disable Ethernet interface for USB modems
Updated DabPlayer app in OEM
Spoiler: 5.0.2 ОТА-package (10.11.2021) update size about 10Mb
If you have device lock enabled in the Settings, then you need to turn it off before installing this update.
Added an alternative GPS driver for the U-blox chip
The accuracy of determining the geoposition in an open area reaches 0.5m
Due to the use of AssistNow Autonomous, the search time for satellites has been significantly reduced
And if you have access to the Internet while booting or exiting sleep mode, then this time becomes even less due to A-GPS
It is possible to use an external USB GPS receiver based on a U-blox chip. For example, TOPGNSS GNSS803G (aka GN-803G)
For owners of a HU on the PX30, this is an opportunity to get a perfectly working GPS, the same as on the PX5 and PX6
GPS Test correctly displays all types of satellites
Added the ability to export, import and reset mod settings
The list of apps running in immersive mode is no longer reset every time the device is rebooted.
The Ethernet interface is no longer turned on after exiting sleep mode, if it is turned off in the Mod settings.
Fixed: If you enable the option under application common settings to pause player when mute then it will not play music after wake up.
Fixed display of navigation data in the screen saver
Fixed temperature display in the screen saver and in the status bar
The screen saver no longer turns on in split-screen mode
Added the possibility of correction for the displayed battery voltage
Color schemes have been fixed in the Mod settings
Added the ability to adjust the delay before restarting the player after exiting sleep mode
Spoiler: 5.0.1 ОТА-package (31.07.2021) update size about 12Mb
Advanced customization of the GPS receiver chip, which includes:
The use of satellite navigation systems Galileo and IMES in addition to the existing ones. The number of visible satellites has increased by about a third
Possibility of increasing the frequency of measurements of geo-position in 10 times. Navigation apps respond more quickly to changes in course or vehicle speed
The lag of the marker from the real position is reduced to a minimum, which means that navigation applications inform about the upcoming maneuver earlier
AssistNow Autonomous positioning acceleration is enabled. Cold start of the GPS receiver takes about a minute
A dynamic navigation model is set - for cars, not for phones, as set by default
Any differential correction satellites are used
You can select the measurement frequency for the GPS receiver: 1,2,5 and 10 Hz
Can use BeiDou satellites instead of Glonass (only for PX5 and PX6)
Unfortunately, not all of this works for PX30 devices as they have a less functional GPS receiver chip
Added GPS chip reset to factory settings when GPS receiver Advanced setting is disabled. Actual for PX30
The rules for distributing processes by processor cores have been changed. This had a positive effect both on the operation of the system as a whole and on the operation of GPS.
GPS starts working normally about a minute after waking up from prolonged sleep mode
Possibility to adjust the speed of the USB OTG port (USB 2.0 or USB 1.1). This allows you to remove clicks that interfere with listening to music through the USB DAC
Ability to disable the Ethernet interface to use Wi-Fi without physically disconnecting the USB modem. Configurable Ethernet interface parameters
Third party apps can now set the time zone on the device. Tested on the Navitel app
If the application has already been installed, then to enable this mode, it must be reinstalled
Added the ability to call by clicking on the name of the contact, and not on SMS
Added display of radio station logos on the widget in the main launcher
You can create a "Quick Call" widget that will launch a phone call to the selected number
Tap on the clock widget in the main launcher now launches the screensaver instead of the clock
Added the ability to lock the device with standard Android way
The lock is activated after a reboot or after the device wakes up from sleep mode. You can also turn on the lock after the Android screensaver is triggered or manually from the shutdown menu
A device lock item has also been added to the shutdown menu
Added screen filter for additional screen dimming in night mode
For the convenience of controlling the brightness level in this mode, a slider has been added next to the daytime brightness
Added the ability to set the power off delay by ACC up to 72 hours (for current versions of the MCU)
Added the ability to adjust the volume from third-party applications
The Navi button now switches between the navigation application and the last launched player, which is included in the "List of media players that should not work together"
Added the ability to disable the device shutdown message
Video app includes gesture control and background playback
Added pause for an incoming call or pressing the Mute button for the Music app and third-party media players
For third-party media players, added pause when going to sleep mode
It is recommended to add third-party media players to the whitelist and to the "List of media players that should not work together"
Added display of pop-up messages with information about playing media from Music, Radio, A2DP applications and third-party media players. Third-party media players must be added to the appropriate list
It is possible to customize the size and color of the font and the duration of the message display, disable the display of pop-up messages over the launcher
You can remove track number information from pop-up messages. This affects the screen saver too
Made transfer of media information from built-in applications to third-party widgets
Added the ability to manage built-in media applications from third-party widgets
For the built-in radio, the ability to display the logos of radio stations on the screen saver and in media widgets has been added
Pictures of logos should be in the Pictures/Radio folder created on the built-in memory of the device
Format: PNG, JPG. Image sizes up to 320x320
File names: 10250.png (102.50 MHz) for the default radio group. A10340.png, B10340.jpg, etc. (103.40 MHz) for other groups
Added default album covers for built-in media applications. You can replace them with your own in the settings
Added to the screen saver:
Display cover art and track information for most third-party players and radio station icons for PCRadio
For correct operation, I recommend adding your players to the "List of media players that should not work together"
Temperature display from Yandex.Weather, Accuweather and Yahoo.Weather notifications if temperature data is not received from the CAN adapter
Displaying recommendations when driving along a route for Yandex.Navigator, Yandex.Maps, Google Maps, Sygic GPS Navigation & Maps
Added the ability not to turn off the sound from other applications after launching the AV-input and DVR applications
Added the ability to mirror the image from the front view camera by default. Useful for those who put a rear view camera on the front of the car
Added color picker for dynamic parking lines
Pressing the Fcam button again now closes the front camera app
New actions for buttons on the steering wheel, including double actions (example: the "Back" button will hang up when there is an active call)
For fans of Taskers, the ability to assign numbers 1-9, 0, and symbols * and # to the steering wheel buttons has been added.
Intent = "com.microntek.report.event"
Extra "type" = "key"
Extra "value" = button code.
Added a list of applications that will run in full screen mode (immersive mode)
Added configurable autostart of packages or activities and services after starting the OS
Spoiler: 5.0.0 (31.07.2021)
Full root access preinstalled (Magisk v22.1)
It is possible to make changes to the system partitions, control granting access to applications, hide the presence of root from some applications, and install additional modules
You can install new versions using Magisk Manager
The firmware is fully reodexed with processor optimization. This gives a slight increase in the speed of the system
Added the ability to receive OTA updates via the Internet
The default is:
English language, Europe time zone
Screen saver timeout - 2 minutes, added options: 10 and 30 minutes
Prevent connecting to data services while roaming
Watching video in motion - enabled
Navigation Hints Mode - Mixing
Mixing degree - 2
GPS time update - enabled
Reverse sound - 4
Screen brightness at night - 20%
Autoplay music when a flash drive is connected - off
Added the ability to adjust the speed at which video playback will be disabled
Removed applications: System Tests, Debugging and Easter Egg
Gmail, Google Text-to-Speech, Google Maps and YouTube have been moved from system apps to third-party apps. Now you can simply delete them if they are not needed.
Added support for init.d. You can put your scripts in the /etc/init.d folder and they will be launched during system startup
Added support for scripts.d. You can put your scripts in the /vendor/scripts.d folder and they will be launched after booting or after exiting sleep mode
Pre-installed MTCDialer, ViPER4Android, GPS Test Plus, Alex's Android Radio exclusive launcher
In order for this version of ViPER4Android to work, you need to enable "Legacy mode" in its settings
An alternative Equalizer has been added to the OEM. Installed as an update to the built-in Equalizer using the Installer application
Revert to the stock version by removing updates in the properties of the "Audio Settings" application
Built-in Contacts app enabled
Contacts and Google Assistant applications dial the number without additional settings
Added synchronization of Contacts and Calendar with a Google account
Added the ability to change the ringtone to any of the ringtones available in the ringtones folder (not for all Bluetooth modules)
Added the ability to disable the fullscreen keyboard
Added the ability to move the status bar to the bottom of the screen
Added the ability to replace codes for buttons located on the steering wheel and front panel. You can customize alternative actions that are performed when buttons are pressed
Added the ability to select applications that have access to USB devices. Allows you to get rid of the annoying access request
In the default launcher, the radio frequency on the widget is not reset after changing the theme
In the launcher, by default, the date is displayed in the format corresponding to the setting in the "Date and Time" menu
The following items have been added to Settings: Home app (launcher selection), Navigation bar (located on the left in some firmware), Start navigation after booting, Reboot system, Mobile network, Mod settings and Developer options
In Settings - About machine, an item with information about the system has been added
Added an on-screen power button in the status bar.
Single press - turn on the screensaver.
Double press to take a screenshot.
Triple press - kill the active application.
Long press - shutdown menu.
Added items to the shutdown menu: Reboot, Safe Mode, Recovery Mode
Added the ability to disable all status bar items. Disabled by default: Home button, storage icons, Volume and Brightness icons. Back button moved from right to left. All items are customizable
Added Navi and F-Cam tiles to the curtain
All elements of the status bar are in the same style and change their color depending on the background color
Removed the limitation on 4 icons in the status bar
Added background for messages from CanBus
Daydream functionality added. This allows you to install any screensaver from the Play Market. For the Android screensaver to work, it must be enabled in the Mod Settings
Added a new screen saver that displays time and date, volume level, speed, and temperature and voltage when this data is available
To display the temperature, you need a CAN adapter and the presence of a temperature in the status bar, and to display the voltage - MCU 2.93 and higher
It is possible to customize the appearance of the screen saver: colors, background image, maximum value for the speed indicator. You can swap the indicators on the left and right
The option "Screensaver is disabled only by pressing the screen"
Added the ability to choose from 12 standard screen savers
Added a whitelist of applications that allow the start of a screensaver. You can add to it, for example, a third-party launcher or player
Added a black list of applications that do not allow the start of a splash screen. You can make it so that the screen saver will always start, except for those cases when on the screen the applications included in the list
Added a whitelist of applications that do not close when going to sleep mode, with the ability to customize
Added volume control in a style typical for AV equipment from the 7floor module
Added the ability to display the volume control at the top, middle or bottom of the screen
Added the ability to adjust the length of time the volume control remains on the screen after changing the volume value
The stock volume control is not shown when the screen saver is running
Changed the look of the standard volume control. The font is enlarged, the color corresponds to the selected theme
Added a list of media players that restart after sleep mode
I have included the PCRadio player on this list. It now correctly starts playback after waking up from sleep mode, if it was started when going to sleep mode
In its settings, you must enable the "Resume playback at application start" switch. Also, you cannot add it to the white list of applications that do not close when device go to sleep mode.
Added the ability to disable restarting applications that were running before going to sleep mode
Added a list of navigation apps that muffle other sounds when playing voice prompts. All navigation applications must be added to the list
Added the ability to assign the last launched navigation application to the Navi button to switch between navigation and the player
Added a separate list of navigation applications that use Text-to-Speech to muffle other sounds when playing voice prompts
To use, you need to add the navigation application to the "List of navigation applications using TTS that muffle other sounds" and select "Text-to-Speech engine that muffle other sounds"
Made a list of media players that should not work together. This list is an addition to the corresponding system list, so there is no need to add built-in applications to it. If one of the players included in this list starts, the rest are closed.
Added the ability to edit the list of applications that are switched by the Mode button
Added the ability to select applications that will run instead of stock apps. You can start your player with a button on the steering wheel
Added volume control based on speed
In the Bluetooth application, the name field in the phone book has been expanded and a scroll has been made if the name is long
During a call, if you minimize the notification, the bottom of the screen remains accessible for taps. The notification does not overlap the statusbar if it is at the bottom
In the Video application, the playlist is expanded and the repeat is disabled by default
Sorting of the playlist in alphabetical order is made without regard to case of lists of folders and tracks
Added button to call the Equalizer
In the Music application, the playlist is expanded and the repeat is disabled by default
Added download of lyrics from the network
Sorting of the playlist in alphabetical order is made without regard to case of lists of folders and tracks
Made transition to the next folder in the list after playing the last file in the current folder in sequential playback mode
Added transition to the previous/next folders by the seekdown/seekup steering buttons and by a long tap on the prev/next on-screen buttons
Added button to call the Equalizer
Radio - the running RDS text has been removed from the buttons of the saved stations. Added the ability to assign names to saved radio stations
If the name for the stored frequency has not been set earlier, the text from RDS is offered
The ability to select a group of radio stations has been made. If you are traveling to a different area where other radio stations are working, you can select another group and tune the stations again, and upon returning home, select the default group again and your settings will be restored.
Added button to call the Equalizer
Added custom parking lines. Thanks for Incognito+
Added the ability to increase the default TTL in the range from 63 to 65 to bypass restrictions on the distribution of the Internet from mobile devices
Added light theme to Mod Settings
Added b-max script for reconnecting freezing USB hubs. Disabled by default, can be enabled in Mod Settings
In applications, translation into different languages has been fixed and added (now 19 languages have been changed).
Other changes to improve stability and usability.
How do I install the firmware?
When switching from any other firmware, you need to wipe user data!
For stable operation of the device, it is recommended to update the MCU firmware to the current one, released in March 2021 or later.
If there is no such firmware for your device, use the latest available one.
MCU firmware can be obtained from your radio dealer or look here
MTCE versions can be installed instead of MTCD
If you have Android 10 installed:
The installation is similar to a regular firmware update:
Copy the firmware file update.zip to a USB flash drive / memory card formatted in FAT32
Connect the USB flash drive / memory card to the device
Set the "Wipe data ..." checkbox and click the "Install" button in the window that appears.
After installation, the device will automatically reboot one more time to complete the Magisk installation.
Installing from a SD memory card may take longer!
If you have Android 9, 8 or 6 installed:
Requires updating the recovery version to Android10
Simple and safe way: Use the ModInstaller Pro application (link to the application in the readme.txt file, which is located in the archive with the firmware or in my signature at the bottom of this post)
Complicated and unsafe way: look for information on this forum
Additions:
Automatic backlight control for PX5-based head units
Internet speed in status bar
Spoiler: FAQ
Q: How to get OTA updates?
A: Information is on my site. You will find the link in the archive with firmware or in my signature at the bottom of this post
Q: How to automatically install my applications after installing the firmware?
A: Create the hct folder on the flash drive with the firmware, the apk folder in it and put your apk in it. They will be automatically installed after the installing the firmware.
Q: How to connect the OBD adapter?
A: This can be done both from the Bluetooth application, and from the Bluetooth item in the settings. The main thing - before you click on the adapter found, you must wait until the scan finished. Wait until the spinning circle disappears in the Bluetooth application or until the inscription "Search..." changes to the inscription "Refresh" in Settings. Then pairing goes smoothly. If the phone is already connected, you will need to temporarily disconnect it.
Q: How to start any application from a button on the steering wheel?
A: Mod settings - Manage applications - Applications that run instead of the stock . Assign any of the six applications that you don’t use to the button, then choose a replacement for it in the form of some kind of player, for example. This button will start your player
Q: Bluetooth MD725 does not work, although everything worked before!
A: If the MD725 Bluetooth module is installed in your HU, then it will not work in Android 10. The reason is that its driver was removed from Android 10.
Q: How do I know if I have such a Bluetooth module?
A: On the first page of the factory settings, in item BT, MD725 is selected.
Q: Bluetooth SD-968 does not work, although everything worked in Android 8!
A: If the SD-968 Bluetooth module with firmware made in March 2017 or earlier is installed in your HU, then it works in Android 8, but does not work in Android 9 and 10.
Solution: replace the module driver /system/bin/sdsdk968 with the old version. Do not forget to set permissions 755 on the file.
Or replace the module with another type
Q: Unable to connect to some WiFi access points. (iOS 15)
A: Read this post
Spoiler: Known Issues
Bluetooth module MD725 not working in Android 10
When installing WebView and Chrome versions 101.x.x.x, crashes occur in these applications as well as in other applications that use WebView.
Fixed in version 5.2.0
Mod is a modified factory firmware.
I can only be responsible for the changes in the device that I made. All of them are listed in the "List of changes" section.
Everything else, both good and bad, is inherited from the factory firmware.
I try to fix bugs found in the stock, but this I can’t always do it.
If you do not agree with this, do not install this firmware.
Spoiler: Screenshots
Spoiler: v5.0.1
Spoiler: v5.0.0
Download:
PX5: Google Drive (english version)
PX6: Google Drive (english version)
PX30: Google Drive (english version)
If you want to help translate Mod into your language, please open this folder.
When you decide to place your translation in this folder, send me a personal message with your Google email. I will give you access.
If you think we need to translate other applications, write to me about it. I will add resources to the folder.
Reserved
Reserved
Thanks for your work, it will be fun to try your Android 10 ROM.
Thank you !! To get the OTA updates we need to pay again to get them or it’s available for those who previously bought the ota updates for android 9 ? Thank you
Great thanks for update
About BT limitations: what about SD BC6? On my px30 android 9, only BC6 is working on factory settings but in android 10 I always got crashes with BT calls
Will give a try to answer by myself lol
(Edit) OMG it's working...no more crashes! Thanks
(Edit2) No finaly, after a few calls, I have same crashes... android 10 is definitely not for px30 and BC6 BT module
DjDerex said:
Thank you !! To get the OTA updates we need to pay again to get them or it’s available for those who previously bought the ota updates for android 9 ? Thank you
Click to expand...
Click to collapse
Code from v4 is not working ofc... and Hal9k 's site is not updated yet, I don't see mod5 there
Thank you for your work. I was really looking forward to this release. How can one upgrade to 5.0.1 via OTA? There is no possibility for this on hal9k's own homepage. There you can only pay for the OTA of mod4
Does the rom have Delay function in the EQ? I have a Dasaita and with the last update the Delay function is gone
So, we have to wait that @Hal9k_ update the site for to buy the code for next OTA after 5.0?
Someone installed V5.0 by SD on PX5, works well? It's faster than V4.2.1?
Thanks
pintofede87 said:
So, we have to wait that @Hal9k_ update the site for to buy the code for next OTA after 5.0?
Someone installed V5.0 by SD on PX5, works well? It's faster than V4.2.1?
Thanks
Click to expand...
Click to collapse
Waiting for an anwer too. Any help @Hal9k_ ?
DjDerex said:
To get the OTA updates
Click to expand...
Click to collapse
There will be the same conditions and discount as for ModInstaller Pro 2.
I haven't managed to update the site yet.
ric69 said:
what about SD BC6?
Click to expand...
Click to collapse
BC6 is the most popular Bluetooth.
I do not have such a module, but the test participants did not notice any problems with it.
Try WQ instead of SD.
Hal9k_ said:
There will be the same conditions and discount as for ModInstaller Pro 2.
I haven't managed to update the site yet.
Click to expand...
Click to collapse
Thank you @Hal9k_ .
So should we wait until you update ? Or there is any other way to pay and get the OTA updates? I had purchased both mod 4 and modinstaller pro 2.
Thank you
pintofede87 said:
Someone installed V5.0 by SD on PX5, works well? It's faster than V4.2.1?
Click to expand...
Click to collapse
It seemed to me that the A10 works smoother than the A9.
The test participants also noticed this.
DjDerex said:
So should we wait until you update ?
Click to expand...
Click to collapse
Wait a bit.
If I don't get distracted, I will update the site faster and for everyone.
Hi,
thanks for the ModV5!
I have an issue with the SD card: it seems the Dasaita MAX6 recognize it, but the SD can't be read neither formatted.
I had same issue with Malaysk rom A10, instead with Hal9k modV4 it works well.
I was waiting for this! It works perfectly so far. Even Bluetooth internet with the iPhone is working (if not using carplay).
Only i'd recommend using another link for the MCU updates. On the 4PDAforum the download links did not work.
As soon as you update your website i'll make the OTA payment.
Keep it up!
As always, Great work Hal!
Installed flawlessly in about 5 minutes. Everything is working much more smoothly than stock.
Thanks!
Hal9k_ said:
BC6 is the most popular Bluetooth.
I do not have such a module, but the test participants did not notice any problems with it.
Try WQ instead of SD.
Click to expand...
Click to collapse
Thanks for you answer. It's a bad story since I tried a lot of android 10.
So I tried WQ BC6, it's the same BUT good news ! I think the problem is ViperFX because I removed from Magisk and it is working (like this morning when I installed clean V5 without V4a)
I removed "Bluetooth internet sharing" too in "factory settings / other" so I'm not sure at 100%...
If it help anyone with this problem, I will test more but I make 8/10 calls w/o problem since 15 minutes.
(Edit) sh.... I closed the car and tried again 10 minutes later ... crash and reboot again (after 3 seconds of call) grrrr