Database Info

Sharp A1 / Z2 / FS8002

Dear Friends,
I've recently bought the Sharp A1 (LeEco Inside) and everything was running smooth until it feel on the ground.
The front screen is brooken!
I look everywhere for a replacement...even with SHARP tawain but no luck. No even in Aliexpress or ebay....I don't find parts for this phone anywhere.
Can someone provide some help?
Thanks in advance,
Sergio

Look ebay. Contact your local dealers and shops
Sent from my SHV-E210S using Tapatalk

[email protected] said:
Look ebay. Contact your local dealers and shops
Sent from my SHV-E210S using Tapatalk
Click to expand...
Click to collapse
I have done all off that....
No luck at all.
It's quite strange the lack of parts for this phone. I'm guessing that "Sharp" only gave the brand...but the hardware is from someone else.
I've already found out that the phone has the following names:
-Sharp A1
-Sharp Z2
-Sharp Aquos Z2
or even
FS8002.
Neverthless....i don't find lcd/digitizer/screen for it.
Thanks!

sasimoes said:
I have done all off that....
No luck at all.
It's quite strange the lack of parts for this phone. I'm guessing that "Sharp" only gave the brand...but the hardware is from someone else.
I've already found out that the phone has the following names:
-Sharp A1
-Sharp Z2
-Sharp Aquos Z2
or even
FS8002.
Neverthless....i don't find lcd/digitizer/screen for it.
Thanks!
Click to expand...
Click to collapse
Contact your phone manufacture
Sent from my SHV-E210S using Tapatalk

[email protected] said:
Contact your phone manufacture
Sent from my SHV-E210S using Tapatalk
Click to expand...
Click to collapse
I already have.
i've contacted "Commtiva Technology, Limited", the owners of Sharp and the makers of this model of phone in taiwan. And they answered...please contact SHARP Portugal (where I live).
Sharp in Portugal, kindly answered...."Sorry, we can't help, because we don't sell Sharp smartphones...only printers, and copiers...bla bla bla".

any help with an original sharp a1 firmware,or another firmware that can be installed on it?? i have same phone for 5 months and it begins to freeze from time to time for about 1 second,reseted to factory and worked fine for 2 days,then during the call i was hearing the sound of notification as i received messages,but no message arrived.reset again,all ok for a day,then freeze again. reset and ok for 3 days, and now i hear the same notification sounds, for couple of times during on a call. i want to put another android version if i can. now i have on it 6.0. i've tried to root it with all programs,not a chance. pls help. thx

Stock Firmware Download
Costi21 said:
any help with an original sharp a1 firmware,or another firmware that can be installed on it?? i have same phone for 5 months and it begins to freeze from time to time for about 1 second,reseted to factory and worked fine for 2 days,then during the call i was hearing the sound of notification as i received messages,but no message arrived.reset again,all ok for a day,then freeze again. reset and ok for 3 days, and now i hear the same notification sounds, for couple of times during on a call. i want to put another android version if i can. now i have on it 6.0. i've tried to root it with all programs,not a chance. pls help. thx
Click to expand...
Click to collapse
Checkout Sharp Mobile Taiwan...w.sharpmobile.com.tw/服務支援-z2

How to Root Sharp Z2?
How to Root Sharp Z2?
I have been search in google but nothing result.

ghopretz57 said:
How to Root Sharp Z2?
I have been search in google but nothing result.
Click to expand...
Click to collapse
Fastboot oem unlock and try flashing this https://drive.google.com/file/d/1XZdnNxF47kWY255igXlebuVIE9k26NpJ/view
msg me if it works and I will link you to Magisk that works for this model and the safetynet fix.

morgs640 said:
Fastboot oem unlock and try flashing this https://drive.google.com/file/d/1XZdnNxF47kWY255igXlebuVIE9k26NpJ/view
msg me if it works and I will link you to Magisk that works for this model and the safetynet fix.
Click to expand...
Click to collapse
not work...

ghopretz57 said:
not work...
Click to expand...
Click to collapse
WHats the problem?

morgs640 said:
WHats the problem?
Click to expand...
Click to collapse
I have been flash that twrp, but when i boot to recovery, it is still stock recovery.

ghopretz57 said:
I have been flash that twrp, but when i boot to recovery, it is still stock recovery.
Click to expand...
Click to collapse
Is your bootloader unlocked?

morgs640 said:
Is your bootloader unlocked?
Click to expand...
Click to collapse
Yes

ghopretz57 said:
Yes
Click to expand...
Click to collapse
When flashing recovery can u send me a screenshot of the cmd prompt after flashing? Or what does it say after flashing?

morgs640 said:
When flashing recovery can u send me a screenshot of the cmd prompt after flashing? Or what does it say after flashing?
Click to expand...
Click to collapse
The messages is:
Transfering OK
Writing OK
But when i boot to recovery, it is still stock recovery, not twrp.

Unbrick my phone?
OMG !
I own a sharp (fs8002) and playing around with it i was trying to root it, unlock the BL and install twrp so i can finally install a custom rom.
With not much info about this low supported phone, i used SP FlashTool and managed to erase everything from it. It is not responsive at all, i don`t see fastboot anymore , no revocery no nothing. SP Flashtool identify the device once plugged as mediatek usb port (com9) but i can not find anywhere the necessary files to UNBRICK it so to make it usable once again!
Is there someone who can help me revive and use this two months old phone ?

Sharp FS8002 stock rom
zeronavigator said:
OMG !
I own a sharp (fs8002) and playing around with it i was trying to root it, unlock the BL and install twrp so i can finally install a custom rom.
With not much info about this low supported phone, i used SP FlashTool and managed to erase everything from it. It is not responsive at all, i don`t see fastboot anymore , no revocery no nothing. SP Flashtool identify the device once plugged as mediatek usb port (com9) but i can not find anywhere the necessary files to UNBRICK it so to make it usable once again!
Is there someone who can help me revive and use this two months old phone ?
Click to expand...
Click to collapse
The stock rom at the Taiwan website (see my earlier post!) is an update-package. It contains a scatter-file that is not suitable for the flashtool...maybe someone can help with that. My guess is that it just does not have the proper format for flashtool. So someone should check that. The firmware seems to be complete, it's 2.1 Gigabyte. I applied the package via update from SD, it works:
Kernel-Version: 3.18.22+ Mon Sep 5 22:19:47 CST 2016
Build Number: NEXCNFN5801509051S release-keys

swrisch said:
The stock rom at the Taiwan website (see my earlier post!) is an update-package. It contains a scatter-file that is not suitable for the flashtool...maybe someone can help with that. My guess is that it just does not have the proper format for flashtool. So someone should check that. The firmware seems to be complete, it's 2.1 Gigabyte. I applied the package via update from SD, it works:
Kernel-Version: 3.18.22+ Mon Sep 5 22:19:47 CST 2016
Build Number: NEXCNFN5801509051S release-keys
Click to expand...
Click to collapse
I managed to download the update firmware file from taiwan website (TSP-1360-0-00WW-A03-update.zip) witch is a 1.92 gb file , but as you said the scatter file contained there is not recognized by SP Flash tool.
Is there a way to make a scatter file for fs8002 with a MT6797 chipset so i can proceed with the flashing ?

Sharp a1/z2 (fs8002) Stock rom via SPFlashTool
I am desperate.. Is there someone on this forum with this smartphone that can create a backup or has access and knowledge to Flash it with SPFlashtool ?
I managed to unlock bootloader, flashed a wrong recovery image and accidentally formatted bootloader and everything. The phone is not responding and i am unable to find anywhere the stock rom to flash it via SP Flash tool
I dont know what else to do..
HELP :crying:

BLUBOO S8 - Development & Support

In order to keep this thread clean, please use this one to discuss about Development, Support or Software Updates.​
HOW-TO Root, Install Custom Recovery (TWRP) and Restore Stock ROM guide: https://docs.google.com/presentation/d/1NJcDBkLk8zMwyv2BTqRjn2NB_ZOWKjP1fRpSVr44Oxk
ROMs:
To avoid any possible issue, do not forget to backup your NVRAM so that you won't risk to lose your IMEI. How-to: http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Stock (Android 7.0)
- 20170926: https://mega.nz/#!5RVxnLzb!gEO6DcV8ppiR1fvHfChJC6FQvFIU3IBpNWpBgm7QJEs
DO NOT USE THE "Format All & Download" OPTION IF YOU CARE ABOUT YOUR IMEI! Choose "Firmware Upgrade" instead.
Previous Releases:
- 20170815: https://yadi.sk/d/_4LRnJb-3MW8iz
Flash Tool
- SP Flash Tool for Windows and Linux: https://mega.nz/#F!dYUm0TbB!SWeMLb5Wu1NbRzTPQ8-s_A​
Recovery:
- TWRP 3.1.1 by @jemmini : https://mega.nz/#F!YI0EGYQI!pGv9Uxe4t4DbPwsUpv9sPQ​
Root:
Rooting Methods (if you are on Stock ROM)
- SuperSU (flashable using TWRP): http://forum.xda-developers.com/apps/supersu​
Extras (Root-Only):
Customization
- Xposed Framework (not available on Nougat yet): http://forum.xda-developers.com/showthread.php?t=3034811​
Useful Third-Party Apps:
Battery Life
- Amplify: https://play.google.com/store/apps/details?id=com.ryansteckler.nlpunbounce&hl=en
- Greenify: https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en​

Hi, i unzip the stock nougat rom (latest)
select MT6750_Android_scatter.txt
press download only
with the smartphone turn off, connect the cable
it starts to flash the rom
flashed ok.
Disconnect cable usbC
Turn on..
and the smartphone stucks logo 10 min ago
edit: now 30 min
edit2: i think the problem is try flashing in download only mode, i try now it on firmware upgrade
Edit3: now works perfect
ty

Can't install TWRP
After following all the instructions, my phone still boots into standard Chinese recovery. Is it something to do with the locked bootloader or is there possibly another problem? There doesn't appear to be a purple bar when flashing the recovery. Maybe it's not the correct one for 20170926?

Femstar said:
After following all the instructions, my phone still boots into standard Chinese recovery. Is it something to do with the locked bootloader or is there possibly another problem? There doesn't appear to be a purple bar when flashing the recovery. Maybe it's not the correct one for 20170926?
Click to expand...
Click to collapse
solution is here : https://forum.xda-developers.com/general/rooting-roms/root-tutorial-bluboo-s8-twrp-t3699724

Can I unlocked band 40 2300 on bluboo s8?

bcbcbhavesh said:
Can I unlocked band 40 2300 on bluboo s8?
Click to expand...
Click to collapse
You can't unlock new band..

can anyone port this to s8+? Thanks

afpereira said:
can anyone port this to s8+? Thanks
Click to expand...
Click to collapse
Be more specific, what do you want to port? You can find many guides on XDA to port ROMs.

Alberto96 said:
Be more specific, what do you want to port? You can find many guides on XDA to port ROMs.
Click to expand...
Click to collapse
I just want twrp

can anyone please tell me if roms from s8 works on s8+ plus

blueboo s8 stuck in recovery
hello can anyone give me so tips and help me ?
i have a bluebook s8 stuck in cwm recovery
it only boots in recovery apparently is not the stock one , I believe some one flashed CWM recovery on it some how
I can access fast boot via recovery thats something I didn't figure out exactly how it works
I tried to restore the stock rom via de stock software but my windows 7 pc doesn't seem to accept the drivers thats why im asking help , I just want the phone usable and all I can do is boot in recovery , im used to flash and root samsung phones but not this Blueboo phones ,this phone was given to me by a friend
if some one could help me I would be very appreciated thank u

ladies and gentlemen
i bought a bluboo s8 plus from alibaba website its new and work but the only problem is that when i put the charger in bluboo s8 it dosnt work so ican not chargin my bluboo s8 plus , please tell me if thers any solution pleas heeeelp me
thunk you so much

Black screen after flashing stock romfor bluboo s8
Hi guys, i tried rooting using my bluboo s8 using the method on this thread but my device is now dead. I tried flashing with sp flash tool. But after flashing phone, it boots up but the screen is black. I'm thinking its the wrong rom varient for my phone, please i really need help on this guys, i just bought the phone last week

melodriod said:
Hi guys, i tried rooting using my bluboo s8 using the method on this thread but my device is now dead. I tried flashing with sp flash tool. But after flashing phone, it boots up but the screen is black. I'm thinking its the wrong rom varient for my phone, please i really need help on this guys, i just bought the phone last week
Click to expand...
Click to collapse
Use my tutorial (link in the first post) to reflash the ROM. Be sure that your variant is the S8 and not S8 Plus

Bluboo S8 Original Boot Animation and Logo
Would anybody be able to get the original bluboo s8 boot animation and logo. Would like to install on my device, and its bothersome to me, and I very ocd. Would appreciate it very much. Thank you

New device : Gome K1

Hi,
I am a little new and don't really know about this subject but :
I purchased a new phone : a Gome K1.
This is not tablet but phone. This is a new brandt. This a MTK (MT6757).
For the story, it came to me with chinese ROM, all menus in chinese
I asked to the seller to give me a ROM with playstore and french. They done it.
I flashed their new ROM with a proprietary flash tool. Now I have a android 6 ROM with Playstore, french menus. Well !
But I'd like to know if there is a way to root it, and install a TWRP :
The ROM came with bootloader locked and no recovery. It is entirely blocked.
No way to unlock bootloader via the general way (fastboot oem unlock --> unknown command)
I read some articles that deal with spflashtool and porting TWRP, but I'm new to this and I don't think I will be able to make all these steps correctly to flash a TWRP ...
Does someone has an idea ?
Is my post on the good topic ?

Up, does someone have an idea of how to root it ?

Hello,i also have a Gome K1 phone and I am also interested at rooting it.
There is an ' OEM unlocking option' under the developers option in the settings, have you tried that yet?
If you managed to import twrp and rooted the phone can you pls send here the steps, Thanks

Hello, happy to not be alone with this phone ...
Yes I tried everything, after enabling unknown source, OEM unlocking and USB Debugging developer options :
- All root apks
- all existing root kits using ADB
- Method with a linux distro to access Phone filesystem as root ( cannot see my phone ... )
Now I'm trying to use SP flashtool last version, but even that cannot correctly access the phone to Readback my recovery : there is BROM error, so I think that phone is not compatible with the phone (seen on a forum ...)
So if someone has an idea, he is welcome
Inveds said:
Hello,i also have a Gome K1 phone and I am also interested at rooting it.
There is an ' OEM unlocking option' under the developers option in the settings, have you tried that yet?
If you managed to import twrp and rooted the phone can you pls send here the steps, Thanks
Click to expand...
Click to collapse

When I contacted them, they send me a non rooted custom ROM which embed Google Apps and All language, AND another flash tool.
This flash tool seems to be based on SP flash tool. It seems to have restrictions (no readback ability ...).
I'm not able to backup anything with this tool or with SP flash tool.
Whis spflashtool, when clicking ReadBack, I power off my phone, and plug USB cable.
It begins the process but I immediatly encounter a BROM error :
ERROR: status_brom_cmd_send_da_fail (0xC0060003)
I read a post which indicate to try to plug usb cable when pressing Power plus Volume Up, but I don't think it can work, because I know that their tool works without that operation.
So now I'm still stuck here. Does someone have an idea ?

Hi
On the Russian forum 4pda, the topic GOME K1 we are also discussing and trying to solve the problem of a locked bootloader. So far no results. ROOT is also not yet possible to get.
I've also ported twrp for GOME K1, but there's no point in installing it until the bootloader is unlocked. Otherwise we will get a brick.

Hi
In Developer options there is a setting to unlock bootloader, it's the third toggle down.
Hope this helps.

Amagram said:
Hi
In Developer options there is a setting to unlock bootloader, it's the third toggle down.
Hope this helps.
Click to expand...
Click to collapse
No, it's not working. This switch does not affect the boot loader state.

vsxby said:
Hi
On the Russian forum 4pda, the topic GOME K1 we are also discussing and trying to solve the problem of a locked bootloader. So far no results. ROOT is also not yet possible to get.
I've also ported twrp for GOME K1, but there's no point in installing it until the bootloader is unlocked. Otherwise we will get a brick.
Click to expand...
Click to collapse
Hello vsxby,
I was successful in flashing custom ROM that vendor uploaded for me.
So I thing I can flash just the recovery with their tool. I'm not an expert, so I'm just a little affraid to follow a guide to port a TRWP for Gome K1 and try to flash it, since it can brick the phone.
If you want, I can't send you a copy of their tool they sent to me (SPMultiPortFlashDownloadProject.exe) ...

z2x said:
Hello vsxby,
I was successful in flashing custom ROM that vendor uploaded for me.
So I thing I can flash just the recovery with their tool. I'm not an expert, so I'm just a little affraid to follow a guide to port a TRWP for Gome K1 and try to flash it, since it can brick the phone.
If you want, I can't send you a copy of their tool they sent to me (SPMultiPortFlashDownloadProject.exe) ...
Click to expand...
Click to collapse
Thank you, but I already have this tool. As I wrote before flashing TWRP we need to unlock the bootloader. While this is not impossible to do. But one of our users on 4pda is going to ask the manufacturer to unlock bootloader. In case of success, I will inform you.
If you want to experiment and flash TWRP with a locked bootloader, I can give you the TWRP I made, but I warn you, it's not safe.

Bro,Can you upload the firmware and tools to google drive or something like? It will be very helpful for dealing with this mediatek replica phone(aus6757_66_m),i got some possible factory test MTK AOSP,but the link expires ：（

@Vortex said:
Bro,Can you upload the firmware and tools to google drive or something like? It will be very helpful for dealing with this mediatek replica phone(aus6757_66_m),i got some possible factory test MTK AOSP,but the link expires ：（
Click to expand...
Click to collapse
It's link GD to multi firmware and tool

vsxby said:
Thank you, but I already have this tool. As I wrote before flashing TWRP we need to unlock the bootloader. While this is not impossible to do. But one of our users on 4pda is going to ask the manufacturer to unlock bootloader. In case of success, I will inform you.
If you want to experiment and flash TWRP with a locked bootloader, I can give you the TWRP I made, but I warn you, it's not safe.
Click to expand...
Click to collapse
Ok, hope manufacturer will accept to give bootloader unlock procedure

z2x said:
Ok, hope manufacturer will accept to give bootloader unlock procedure
Click to expand...
Click to collapse
We were unable to contact the manufacturer and the moderators of the official GOME forum do not have this information. At the moment, there are no solutions to this issue.

z2x said:
Hello vsxby,
I was successful in flashing custom ROM that vendor uploaded for me.
So I thing I can flash just the recovery with their tool. I'm not an expert, so I'm just a little affraid to follow a guide to port a TRWP for Gome K1 and try to flash it, since it can brick the phone.
If you want, I can't send you a copy of their tool they sent to me (SPMultiPortFlashDownloadProject.exe) ...
Click to expand...
Click to collapse
could you please post here what is the procedure you took to flash the rom. Seller sent me with multi language rom. i want to downgrade the rom to its original one. I used your tools in the windows 10 lap. and also in the windows 7 lap but it was useless. I am going to try the procedure in the windows 8.1 lap. can you tell me exactly how you flash your phone with that tool ?

Hey Bro,
I get my new Gome K1 with Global ROM
but have some issues with my new Gome K1 >> the GPS doesn't work proper for Google Maps / Waze, it doesnt show accurate position most of the time, but it seems work well with "offline GPS" (but offline GPS most of the time not able to find location that I ahead for meeting). Any recommendation/solution?
Thanks in advance

Hi, is there any modem file for this phone ? MDDB....

original eom (china rom).
Hello every one i buy thise phone and come with multilanguage firmware but i like the origin one, can anyone help me the link of the firmware of origin!!

vsxby said:
We were unable to contact the manufacturer and the moderators of the official GOME forum do not have this information. At the moment, there are no solutions to this issue.
Click to expand...
Click to collapse
After some time ... is there any news about his root? I wouldn' t like to change the rom, but just do the root thing would be useful ..... tks

i've disabled the google app in the settings and now the phone is stuck on boot logo... any ideas how to fix this?
---------- Post added at 06:51 PM ---------- Previous post was at 06:30 PM ----------
driska said:
i've disabled the google app in the settings and now the phone is stuck on boot logo... any ideas how to fix this?
Click to expand...
Click to collapse
found the answer on 4pda, can't post link.

Xperia 10 - kernel + root

Boot.img For Xperia 10 I31XX and I41XX variants.
I31XX Variants
DOWNLOAD:
STOCK
I41XX Variants
DOWNLOAD:
STOCK
For root you need install magisk manager and patch boot.img via magisk .
Next step is easy : Install drivers and use flashtool or fastboot to flash patched boot.img .
Good luck .
FLASHING:
For flash you need :
1.Unlocked bootloader (warranty to be not void)
2.ADB i FASTBOOT
3.Drivers for your device (try to install drivers from flashtool. Win10 users must disable drivers signing.)
If you like my work , please press Thanks
If you want to buy me a coffee for my work you can use PayPal Thanks
https://paypal.me/marek10747
My Facebook group :
Facebook support group , for all devices !!
I do TWRP soon for this device . At this moment I don't have this device !!
This kernel I do for xperia 10 , but I patch this kernel manually !!
This kernel is from flashtool , I only unpack it manually without use flashtool , because flashtool don't support unpacking this files now .[/B]​
XDA:DevDB Information
XPERIA 10 - KERNEL, Kernel for the Sony Xperia 10
Contributors
MAREK10747
Kernel Special Features:
Version Information
Status: Stable
For: I31XX , I41XX
Base: 53.0.A.4.X
Created 2019-04-10
Last Updated 2019-04-10

This kernel will to be working possibly with I41XX devices . Please test dear user and comment it here .

Thank you
download link for I41XX Variants does not work

BiaBertK said:
Thank you
download link for I41XX Variants does not work
Click to expand...
Click to collapse
I'm know This links is disable to moment of my finish work with this kernel . Soon I do boot.img and I add this link

I unlocked the bootloader 3 weeks ago. Beyond that, I've had a hard time making any other progress. Kinda worried to take risky steps since barely anyone has this phone. I feel all alone in the in the rooting community with this device ?

bluelemonzz said:
I unlocked the bootloader 3 weeks ago. Beyond that, I've had a hard time making any other progress. Kinda worried to take risky steps since barely anyone has this phone. I feel all alone in the in the rooting community with this device
Click to expand...
Click to collapse
Don't worry . I don't have device But I do special kernel for this device . I say you only one question : soon maybe users buy this device . I support only xa1 but few years ago I support e5 . This devices have too small users , on last two devices I'm only one dev what do system's for this devices

MAREK10747 said:
Don't worry . I don't have device But I do special kernel for this device . I say you only one question : soon maybe users buy this device . I support only xa1 but few years ago I support e5 . This devices have too small users , on last two devices I'm only one dev what do system's for this devices
Click to expand...
Click to collapse
Hello. Well thank you for helping myself and others with this device. A Sony device is very new to me. I usually would use the stock kernels on HTC and Samsung phones, but I know it's different with these devices. If you get a working kernel, could you give instructions how to install.. Thank you

bluelemonzz said:
Hello. Well thank you for helping myself and others with this device. A Sony device is very new to me. I usually would use the stock kernels on HTC and Samsung phones, but I know it's different with these devices. If you get a working kernel, could you give instructions how to install.. Thank you
Click to expand...
Click to collapse
All is in the thread

I downloaded the boot.img and boot.magisk.img files. I'm not sure what to do to install it via adb. I have a I31XX Variant

bluelemonzz said:
I downloaded the boot.img and boot.magisk.img files. I'm not sure what to do to install it via adb. I have a I31XX Variant
Click to expand...
Click to collapse
For install you need adb and fastboot
adb and fastboot drivers
drivers for your phone
cable
brain
time
Know/How about fastboot commands Sometimes you can try to use flashtool for install boot .

Probably a silly question as I haven't used Android until recently since 2009, but how do you know whether your device is I31XX or I41XX?...

monokrome said:
Probably a silly question as I haven't used Android until recently since 2009, but how do you know whether your device is I31XX or I41XX?...
Click to expand...
Click to collapse
Settings -> System -> About the phone -> Model

any method to root I41XX variant?

Phone Corrupted
My phone was corrupted when I installed the .bin file using FlashTool. Any advice on how to restore it?
---------- Post added at 02:50 AM ---------- Previous post was at 02:25 AM ----------
Also opening the official Sony Flash Program (Emma) yields a "No Matching Services" error, with the code: 19be779c-f8da-46e6-b8c3-eff31b39b980

Is there someone who tested? Want to do it, but without actually bricking a phone :V.

BlueWizzard said:
Is there someone who tested? Want to do it, but without actually bricking a phone :V.
Click to expand...
Click to collapse
I would recommend waiting for full support from FlashTool and TWRP before attempting this. At this point if the phone is bricked the only possible way to recover the firmware is to manually re-flash each individual file in the firmware .ftf, and I have not tested that yet.

When can we expect the I41xx variants links?

The only way to currently recover a bricked Xperia 10 is to use NewFlasher (https://forum.xda-developers.com/cr...ress-newflasher-xperia-command-line-t3619426) and XperiFirm (https://forum.xda-developers.com/cr...perifirm-xperia-firmware-downloader-t2834142)

Can anyone please test if this works and is safe to install?

If anyone wants to test, and make sure their phone doesn't get bricked, use ./flashboot boot <<boot image>>

Are there any Custom Rom for OPPO A5S model 1909?

i'm just wondering if there is already a way to unlock the bootloader for the OPPO a5s 1909 and flash a costum Rom.
the only method available is to downgrade the version and install bootless root but it's still block the potential to boost the speed of the phone using a clean stock rom. thankss

look
Unlocking bootloader is easy
just use MTKCLIENT TOOL from github
Install MTK drivers
Power off your device when the MTKClient tool is Ready to use
Boot your phone in Brom mode (Vol up+Vol down) and plug in your phone to pc then click start ( after u choose unlock bootloader choice)
Then , TADAAAA
(note : ur data won't be removed ( but have a backup )
But unfortunately I can't find a custom rom for oppo a5s

Zezo 089 said:
look
Unlocking bootloader is easy
just use MTKCLIENT TOOL from github
Install MTK drivers
Power off your device when the MTKClient tool is Ready to use
Boot your phone in Brom mode (Vol up+Vol down) and plug in your phone to pc then click start ( after u choose unlock bootloader choice)
Then , TADAAAA
(note : ur data won't be removed ( but have a backup )
But unfortunately I can't find a custom rom for oppo a5s
Click to expand...
Click to collapse
thank you for the inputs.
yeah the costum rom will be a big factor. the current OS for said device s*cks and eats to much ram. i ended up debloating and still use the same OS.

kimimaru23 said:
thank you for the inputs.
yeah the costum rom will be a big factor. the current OS for said device s*cks and eats to much ram. i ended up debloating and still use the same OS.
Click to expand...
Click to collapse
Nice
But
What system apps did you remove ?

Zezo 089 said:
Nice
But
What system apps did you remove ?
Click to expand...
Click to collapse
Almost all the unecessary stuffs. I used a universal debloater and it works. It remove the apps from the system and free some extra rams.

kimimaru23 said:
Almost all the unecessary stuffs. I used a universal debloater and it works. It remove the apps from the system and free some extra rams.
Click to expand...
Click to collapse
Automatically?

kimimaru23 said:
Almost all the unecessary stuffs. I used a universal debloater and it works. It remove the apps from the system and free some extra rams.
Click to expand...
Click to collapse
Also
I'm facing an ULTRA problem
A system root warning notification appears in my device ( OPPO A5S) , every time i edit a system file, enabling a magisk module , or appears without a reason
WHAT SHOULD I DO SO THIS FRICKING NOTIFICATION GET REMOVED PERMANENTLY

Zezo 089 said:
Automatically?
Click to expand...
Click to collapse
Yes. Look for universal android debloater GUI in github. It works great.

Zezo 089 said:
Also
I'm facing an ULTRA problem
A system root warning notification appears in my device ( OPPO A5S) , every time i edit a system file, enabling a magisk module , or appears without a reason
WHAT SHOULD I DO SO THIS FRICKING NOTIFICATION GET REMOVED PERMANENTLY
Click to expand...
Click to collapse
I haven't tried rooting the unit since i cannot find options for a stable root.

kimimaru23 said:
I haven't tried rooting the unit since i cannot find options for a stable root.
Click to expand...
Click to collapse
I have a way !

kimimaru23 said:
I haven't tried rooting the unit since i cannot find options for a stable root.
Click to expand...
Click to collapse
[GUIDE] Root + Unlock bootloader for oppo a5s (CPH1909) after security update ( without downgrading the version of the phone ) !!)
Hello ! I've discovered a new way to root oppo a5s ( CPH1909) after the new security update which removed the mtk-easy-su root (NOTE : YOU WILL REQUIRE : 1- THE LATEST FRIMWARE UPDATE TO OPPO A5S 2- A PC / Laptop 3- MTK Client Tool -link will be...
forum.xda-developers.com

kimimaru23 said:
I haven't tried rooting the unit since i cannot find options for a stable root.
Click to expand...
Click to collapse
Check this thread !

Zezo 089 said:
Check this thread !
Click to expand...
Click to collapse
Thanks for this Bro. i'll check it out.
for now, i don't see the benefit of rooting unless i replace the OS close to stock android.