I have see a thread : http://forum.xda-developers.com/showthread.php?t=1903745
It is update RK2918 to Jelly Bean.
Is any one know how to update it using Jelly Bean ROM? And what is the compatible version for Nextbook 7S (Resistive version)?
I ask here since i can't post at the thread.
hi
hi bro this is not na update it's just custom rom you can install it but you will gonna remove the stock rom you have
first thing connect your nextbook via usb the press both volume and press reset button for 2 seconds at the same time then run rkflash tool as adminstrator erase idb run specefic kernel for your device tick loader then press run wait 5 minutse first boot into cwm apple update from sd-card choose jb format nand in attachement in the main wiat1-2 minutes enjoy
tested working on my nextbook 7se (next7P12)
working100%
thing you will think at it's working (bluetooth-hdmi-3g configuration-phone) but really it's not workig on my tablet
i wish i helped you
anything else text me
my device is not detected at the rk tool, i dont know why
Work like charm on my nextbook7se
Sent from my GT-S6500D using Tapatalk 2
You need to install drivers
Yafinewbie said:
my device is not detected at the rk tool, i dont know why
Click to expand...
Click to collapse
Once you install the drivers you should be able to see the tab in device manager and rk tool.
Hello Friends...
After Long time of research i found the way to restore our bricked iball slide 6318i.
By this method you can easily restore and reflash stock rom to your slide.
First you have to download this files...
1. Flash Tool - DOWNLOAD
2. ROM image/ Update Image - DOWNLOAD
3. Drivers - DOWNLOAD drivers
Now you are ready...
First thing...you slide should have battery about 40%....
Lets start
1. Run that flash tool
2. unzip the ROM image update.img
3. load this image into Tool.
4. Now take you iball slide 6318i and press Volume down + power button together. and connect with USB.
5. Now right click on my computer icon and click on Manage and then Device manager and you will see one unknown usb device with yellow mark. now right click on it and update driver. Select drivers manually from your computer and select those you downloaded above. After installing these drivers your PC will detect an device something like rk29xxx bla bla bla.....
now you are ready to flash your stock rom.
6. Now you will see green Square in device list in tool..Means your device is ready.
7. Now Hit upgrade
8. DON'T do anything with your iball slide 6318i and PC till then flash process is going on..
your tablet will restart and will see some green android sign...Don't get panic Your Device's android is preparing itself..Now your device may restart servel time or maybe you will done in single try..
Wahoooooo...!!!
you just reinstall your Iball slide 6318i..
Now Do experiment with your iball slide 6318i and develop some crispy ROM for our iball slide 6318i..
NOTE:-- This Method is tested by myself and safe but you may brick your slide if not done proper..Try this at your OWN risk...Happy Flashing
hmm..... looks good we ill try and add to our official dev tread:good:
Broken
links are broken !
Link is not working please check it
updated
jack795 said:
links are broken !
Click to expand...
Click to collapse
Links are updated
update
teletalk said:
Link is not working please check it
Click to expand...
Click to collapse
Links updated...check it
LINKS not working
please update those download links
My phone was ok. I installed cwm recovery by mtk dorid tool. But , I wanted to install TWRP recovery by a pc software- during installation a warning message appeared and I clicked ok (something formatted – I did not remember). Then I lost my mobile network signal, null imei and null baseband. Then I install N9500_MTK6589_Miui_Revolution_4.5.23_Cwm via CWM recovery (2 times, but system closed automatically. But, third time after installation phone totally bricked ). Basically phone starts with startup sound, but with crushing screen. I was able to connect mtk dorid tool and it says Model: N9500- null baseband-null imei, then I tried to Install CWM recovery. Then phone totally bricked without starting. I tried everything from google to solve. Then I was able to firmware upgrade – stock rom (Only one time). Now, stock rom is not downloading. I used all sp flash tools. All the times one error appears –Brom Error: S_FT_Enable_DARM_Fail (4032).
Please anyone help me. (My Pc Detect My Phone as preloader usb vcom port, I am using windows 8.1 64 bit, no issue with driver software and sp flash tool)
Device Name: Symphony w 92, MTK 6589 , 1.2 GHz ,Quad Core , 4 GB rom . 512 Ram, 5 inch Capacitive Full Touch, (854*480),8MP Primary (Flash light) + 2MP Secondary.
Please Help me to solve .
Duplicate thread.
http://forum.xda-developers.com/general/xda-assist/how-install-preloader-mtk-6589-bricked-t2969643
Dear friends
After a long time i have discovered how to flash stock rom for our lava iris selfie 50:good:
As the flashing guide explained in xda firmware download page using broadcom multi downloader is not working Follow my way
Step 1 : Download and extract lava iris selfie 50 stock rom from here http://xdafirmware.com/lava-iris-selfie-50
step 2 : Download and install brodcom usb driver from https://www.dropbox.com/s/8y030yzqejdt5yb/brodcom drivers.rar?dl=0 and install them.
Step 3 : See here How to use DFU http://androidxda.com/flash-stock-rom-using-dfu
Note : Click on the Reboot [ Restart device after download ] check box in Advance options before hitting start button.
Note : If you forgot to click Reboot [ Restart device after download ] check box and you started flashing don't panic because after download your phone wont start automatically so remove battery and insert again and start that's it....
Enjoy your day...
Hit thanks if you liked it, Have a good time....
Ks
I tried this but when I clicked strat and connected my device it not detected
did you removed your battery or connected with battery? kindly tell how you tried elaborately
Sanjau143 said:
I tried this but when I clicked strat and connected my device it not detected
Click to expand...
Click to collapse
your phone not detected because you didnt installed brodcom usb driver... download them and install from here https://www.dropbox.com/s/8y030yzqejdt5yb/brodcom drivers.rar?dl=0. then try the process again it will work
tried bot but not detected
xonun said:
tried bot but not detected
Click to expand...
Click to collapse
your phone not detected because you didnt installed brodcom usb driver... download them and install from here https://www.dropbox.com/s/8y030yzqejdt5yb/brodcom drivers.rar?dl=0. then try the process again it will work
broadcom drivers not installing properly....
all of its status getting failed
Please. Update lollipop rom for lava iris selfie 50
This thread is about how to recover the MTK Android phone, if it has gone Bricked (soft/hard/dead/etc)
THIS IS FOR INFORMATION ONLY.
Q. How Phone gets Bricked?
Ans : Basically, phone get bricked during the installation of Android OS (flashing).
Reason/why it happens
- If flashing is interrupted by low battery or loose cable connection during flashing.
- Using wrong firmware or a custom ROM (unstable) to flash your phone.
Result:
* Phone will not boot even after holding the power key and it will not accept charging. (Hard Brick / Dead Brick)
* Boot-Loop
* Restart loop
* No Recovery (In this situation, Hard Reset will not work)
Q. - Why Phone becomes dead (MTK Android Phone) ?
Ans : While installing Custom ROM or Stock firmware (unstable), Preloader (.bin) file becomes corrupted.
PRELOADER - It is the file in MTK android phone which helps to boot the phone.
Tools & Software Required:
SP Flash tool
Android Stock ROM
MTK USB Driver
PC / Laptop
Dead MTK Phone
USB cable.
NOTE: SP Flash tool has 3 Dropdown, Its meaning & How to use:
MOTA SIU : while choosing this function before clicking on Download, only boot, recovery and Android will be updated.
Format All + Download : while choosing this function before clicking on Download, it first erases the old Firmware then install new firmware. (Recommended when MTK phone stuck at logo & hard reset fails)
Firmware Upgrade: while choosing this function before clicking on Download, its update the Android version. (Recommended when installing a higher or lower version of Android manually)
Steps to Fix/Unbrick Dead Android (MTK) Phone
1- Install MTK driver.
2- Download the tool.
3- Unzip it and double click on Flash_tool.exe.
4- It will launch the tool.
5- Download Android stock ROM, unzip it.
6- Click on Scatter-Loading and assign the path of file (Select Firmware i.e. {.txt extension}).
7- Click on Download.
8- Switch off Mobile and connect it to PC using USB cable by pressing Volume down as boot key.
9- Flashing starts and when completed, Download OK will appear.
Also check Here for more Understanding, Special Thanks to @yuweng
Please let me know if anything is wrong here, so that I can make correction and help other member for better understanding.
Also hit THANKS button if you find this as useful info.
If you found this post helpful then don’t forget to share this post with other Android users so that they could get their dead phones working in few easy steps without paying few dollars on it.
Reserved
Nice Guide, Can you please list MTK devices ????
421rahman said:
Nice Guide, Can you please list MTK devices ????
Click to expand...
Click to collapse
OK, Will be adding attachments later, Thanks
Salman
--
Thanks @Salman Al-Badgail for this use full info.
Deena Khanam said:
Thanks @Salman Al-Badgail for this use full info.
Click to expand...
Click to collapse
welcome & Thanks
@jamsubzero check this guide
@jamsubzero I saw your post and thread regarding Dead Bricked
Hey guys.
I own a lenovo A328. For the past couple of months my phone, gets poping up "com.google.etc.etc has stopped".
I tried doing a factory reset, but no luck. Then I learn that I can flash it using SPflash tool with the stock firmware.
And luckily, I did it, my phone back to normal. But then, a few couple of weeks, it started to pop up the same error messages again until I can't do anything on my phone, and unitl it boot loops. So, I reflash again with the same firmware (stock).. and it works again. And same thing keeps repeating and repeating;
until I thought I can try to change the options in sp flash tool..
Instead of "Download only", I choose, "Firmware upgrade".... the flashing finished successfully.
BUT when I press the power button to turn it on, nothing happens, and when I charge it, I cant see the charging screen (or it's not actually charging). I'm sure that it is charging before the flashing, and the power button is working.
When I connect it to the computer, i hear a "connected" sound, then "disconnected", and repeating.
i also tried to reflash it, both the "DL only" and "Firmware upgrade", even the "Format all + ...."
and it flashed successfully (meaning, computer still recognized it), but still not turning on.
Please help me. please.
Click to expand...
Click to collapse
NEVER DOWNLOAD ROM NOT MEANT FOR YOUR PHONE. IT WILL BRICK IT !
What you did is you flashed wrong firmware to your device and the result you in Dead Brick, However there is still solution for your problem. Please Please Please do a proper search first and download correct firmware and other necessary files for your device. Please check firmware number ok.
You can Flash it again but you need to open phone and try, Check here for better understanding.
GUIDE : HERE. Or else please go to any mobile shop and ask them to flash. Dont tell the original reason that you tried to flash or etc. Tell them that it stop suddenly and for now I am unable to access it. They charge you about 5-15 USD based on your country, for me they had charged 10U$D me for lenovo A3500-HV dead flashing. Hope this help you.
i got no scatter file in stock rom pls help!
Aller retour si flash tool
Hard bricked Lenovo a7000
**Hi I got problem on yesterday I was install ing new Rom but suddenly my Lenovo a7000 hard brick
It is not responding any point .even charging .and charging light also .it's dead
But it when I connet to my pc it's connecting sound conning from pc ....My phone is dead plaease help
Salman Al-Badgail said:
This thread is about how to recover the MTK Android phone, if it has gone Bricked (soft/hard/dead/etc)
THIS IS FOR INFORMATION ONLY.
Q. How Phone gets Bricked?
Ans : Basically, phone get bricked during the installation of Android OS (flashing).
Reason/why it happens
- If flashing is interrupted by low battery or loose cable connection during flashing.
- Using wrong firmware or a custom ROM (unstable) to flash your phone.
Result:
* Phone will not boot even after holding the power key and it will not accept charging. (Hard Brick / Dead Brick)
* Boot-Loop
* Restart loop
* No Recovery (In this situation, Hard Reset will not work)
Q. - Why Phone becomes dead (MTK Android Phone) ?
Ans : While installing Custom ROM or Stock firmware (unstable), Preloader (.bin) file becomes corrupted.
PRELOADER - It is the file in MTK android phone which helps to boot the phone.
Tools & Software Required:
SP Flash tool
Android Stock ROM
MTK USB Driver
PC / Laptop
Dead MTK Phone
USB cable.
NOTE: SP Flash tool has 3 Dropdown, Its meaning & How to use:
MOTA SIU : while choosing this function before clicking on Download, only boot, recovery and Android will be updated.
Format All + Download : while choosing this function before clicking on Download, it first erases the old Firmware then install new firmware. (Recommended when MTK phone stuck at logo & hard reset fails)
Firmware Upgrade: while choosing this function before clicking on Download, its update the Android version. (Recommended when installing a higher or lower version of Android manually)
Steps to Fix/Unbrick Dead Android (MTK) Phone
1- Install MTK driver.
2- Download the tool.
3- Unzip it and double click on Flash_tool.exe.
4- It will launch the tool.
5- Download Android stock ROM, unzip it.
6- Click on Scatter-Loading and assign the path of file (Select Firmware i.e. {.txt extension}).
7- Click on Download.
8- Switch off Mobile and connect it to PC using USB cable by pressing Volume down as boot key.
9- Flashing starts and when completed, Download OK will appear.
Also check Here for more Understanding, Special Thanks [email protected]
Please let me know if anything is wrong here, so that I can make correction and help other member for better understanding.
Also hit THANKS button if you find this as useful info.
If you found this post helpful then don’t forget to share this post with other Android users so that they could get their dead phones working in few easy steps without paying few dollars on it.
Click to expand...
Click to collapse
S
Sir please help me out
I have Micromax a120 device. Few days back it got bricked it stuck on bootloop and not working even after factory reset moreover my pc is not recognizing mobile and display message as device descriptor request failed. I have installed all drivers
---------- Post added at 07:47 PM ---------- Previous post was at 07:47 PM ----------
Salman Al-Badgail said:
Reserved
Click to expand...
Click to collapse
Sir please help me out
I have Micromax a120 device. Few days back it got bricked it stuck on bootloop and not working even after factory reset moreover my pc is not recognizing mobile and display message as device descriptor request failed. I have installed all drivers
im having mt8127 mtk device it is not flashing iam having corrupted preloader i tried to flash the preloader it is not flashing , can any body knows to fix it??
How can a phone that's bricked be switched off? Am a bit confused.
Salman Al-Badgail said:
This thread is about how to recover the MTK Android phone, if it has gone Bricked (soft/hard/dead/etc)
THIS IS FOR INFORMATION ONLY.
Q. How Phone gets Bricked?
Ans : Basically, phone get bricked during the installation of Android OS (flashing).
Reason/why it happens
- If flashing is interrupted by low battery or loose cable connection during flashing.
- Using wrong firmware or a custom ROM (unstable) to flash your phone.
Result:
* Phone will not boot even after holding the power key and it will not accept charging. (Hard Brick / Dead Brick)
* Boot-Loop
* Restart loop
* No Recovery (In this situation, Hard Reset will not work)
Q. - Why Phone becomes dead (MTK Android Phone) ?
Ans : While installing Custom ROM or Stock firmware (unstable), Preloader (.bin) file becomes corrupted.
PRELOADER - It is the file in MTK android phone which helps to boot the phone.
Tools & Software Required:
SP Flash tool
Android Stock ROM
MTK USB Driver
PC / Laptop
Dead MTK Phone
USB cable.
NOTE: SP Flash tool has 3 Dropdown, Its meaning & How to use:
MOTA SIU : while choosing this function before clicking on Download, only boot, recovery and Android will be updated.
Format All + Download : while choosing this function before clicking on Download, it first erases the old Firmware then install new firmware. (Recommended when MTK phone stuck at logo & hard reset fails)
Firmware Upgrade: while choosing this function before clicking on Download, its update the Android version. (Recommended when installing a higher or lower version of Android manually)
Steps to Fix/Unbrick Dead Android (MTK) Phone
1- Install MTK driver.
2- Download the tool.
3- Unzip it and double click on Flash_tool.exe.
4- It will launch the tool.
5- Download Android stock ROM, unzip it.
6- Click on Scatter-Loading and assign the path of file (Select Firmware i.e. {.txt extension}).
7- Click on Download.
8- Switch off Mobile and connect it to PC using USB cable by pressing Volume down as boot key.
9- Flashing starts and when completed, Download OK will appear.
Also check Here for more Understanding, Special Thanks to @yuweng
Please let me know if anything is wrong here, so that I can make correction and help other member for better understanding.
Also hit THANKS button if you find this as useful info.
If you found this post helpful then don’t forget to share this post with other Android users so that they could get their dead phones working in few easy steps without paying few dollars on it.
Click to expand...
Click to collapse
i am trying to flash vivo s7 and the cable shake and since then the phone is dead, have flashed it several time, it complete but it refuse to on
I need help please
Basically I was flashing updates for my CUBOT Nova and everything was going fine and I tried out this custom recovery which wouldn't mount any partition so it didn't really suit me. And I did this a dozen of times with other recoveries and if anything happened I had the firmware in SP tools ready to be flashed and if I could save going to it I just used the fastboot to flash it, and so I decided to completly stop and just put my phone back to normal and because I done it before I formatted the whole flash, (and FYI every 2 times I plugged in the phone powered off my computer always searched for drivers in the windows update but it failed and so everything still worked) but after I formatted it and plugged it out and in to download the firmware, my computer successfully installed the drivers and at this moment I was like shoot so I tried to download and it didnt recognise my phone and so I uninstalled the driver my computer installed and see if it worked and it kept installing it again, so I decided to uninstall every mtk driver I had and rebooted, when I installed every single driver again it tried to download drivers from the windows update but it failed and on the sp flash tools it goes to 100% on the Downloading DA (so the red bar) and stays like that for a while and I get notifications that I have a unrecognisable usb device and after a while it gives me randomly 2 errors 0xC0050005 and 0XC0060001 and I know someone is going to tell me I dont have the right firmware or that it's not the right ones but it isn't I got from the official Cubot website and I got an early versions from firmwarefiles I think and none of them work, now I just have a phone without anything on it and I cant flash anything on it until I just hope someone would walk me through what to do I would appreciate so much I'm sorry I wrote so much as I had to explain in max detail as I could what happened!
netcrafy said:
How can a phone that's bricked be switched off? Am a bit confused.
Click to expand...
Click to collapse
i wanted to say the same thing, also i tried enter EDL for 2 days DD (helio G80) LMFAO
Hi there
I would like to know if you can help me in repairing my device.
So i wanted to do an upgrade on the tablet and i messed it up.
I was on CMW recovery at first and then i did a format on cache system and data. but when i wanted to flash the rom CM14.1 it fail and the devices restarted.
the screen goes on but i can see faint lines on the screen.
I did make a back up of the rom and tried to flash it back but it didnt work.
I used all the roms and it still didnt work. I tried many SP flash tool and formating and still not working. every single rom has been flash and all are green but the phone does not want to boot. i have youtube and followed the instructions and every single step i can think of but u have a gut feeling i am mssing something.
I cannot write SN on the fone as it will not work. i have uninstalled all the drivers re-install all the drivers did all the instruction that you have provided but still it will work.
the tablet does still detect on the PC and it does work. so basically it is in a bootloop but its not powering up. Some suggested using MRT TOOLS or MIRACLES but i have a problem with that as it always have a virus attached it to and when i download it the pc removes it. so i dont know where i can get a good crack tool.
i really need your help if you can.
Hello Guys
i closed SP tool while flashing
my phone : infinix hot 10s
i cant power on it and cant join fastboot and cant join bootloader
When i connect phone by orginial usb
computer said (USB not recoginzed)
i installed all drivers but now phone is dead and he was rooted so i cant going to warranty
how i fix it?