[TIPO] Phone doesn't boot with Vengeance - Sony Xperia Miro, Tipo (Dual), J, E

Well, my question is so simple... how can I go back to ICS without using flashtool?
Can I just flash vengeance kernel and flash for example Gimlo or ZNXT rom?
Thanks
__________________________________________________
New Question: Phone doesn't boot with Vengeance: I tried to flash vengeance and install Znxt v6, CWM/TWRP couldn't flash it and I read that issue on other thread so I flashed stock kernel and flashed it and it works fine, then I flashed Vengeance again (tried with v1.40, v1.43, v1.45) and on first boot while bootanimation it flashes white splash screens and then reboots and I get bootloop (stuck on Sony Logo). I came back to CM10 until someone can give me some advice.
Thanks.

yes you can do that.

Don't you have to use flashtool to flash a kernel?

Nope @Chainfire's work Odin makes it possible for you to flash kernels

bump, new question.

Vengeance isn't compatible with znxt rom.
The items that are not compatible are the updated adreno libs. Download the zip from this thread and delete the files the downloaded zip stores in the znxt zip.
http://forum.xda-developers.com/showthread.php?t=2352724
Remove CWM recovery from the znxt zip (recovery.tar) since Vengeance already has dual recovery.
Those are the compatibility issues I know about, try what i said if you really want znxt rom on your device.

How to use this kernal and which rom is compatible on,this kernel...plz guide me bros......
Sent from my Xperia Tipo

Related

Infinite Booting

I just flashed the CyanogenMod 7 MusicEdition_v1.1 and my phone has been stuck in an infinite booting loop
please help!
Damn bro, stop flashing roms from guys that are porting for the first time.
Try to put your SD Card on other phone and put a zip file of a rom, Creeds ROM or FITDroid.
managed to install official 2.3.6 ROM
that rom had pretty good reviews
anyhow, is this one safe?
http://forum.xda-developers.com/showthread.php?t=1415095
or this
http://forum.xda-developers.com/showthread.php?t=1277759
(though i don't like FITDroid much)
just flash it over cm7.1 that worked for me
flash this first :http://forum.xda-developers.com/showthread.php?t=1324190
and then flash your cm7.1 music edition
do i flash the OC kernel first or the ROM?
You must flash the rom, then the kernel. And before you flash the kernel don't forget to mount system in advanced (CWM Recovery).
follow the instructions on link i gave u u dont have to flash kernel its not necessary just flash rom from link above and after that flash cm7 music edition i had same problem and this worked for me
k thanks
i'll give it a try

[Q] Stuck on green htc logo

Hello.
I currently have my pico with stock rom, with sense 3.5. and i'm tryin to flash a new rom, but every time i try to flash one from this thread ( http://forum.xda-developers.com/showthread.php?t=1754876 ) i got stuck on htc logo screen. and i cant get passed it... i've wiped everything, reflashed kernel, reflashed stock, but still cant get it to work. maybe these kernels arent for stock roms, if they're not, can you point some kernels that work on stock?
thanks in advance.
Stock rom should have stock kernel too.
Flash the gingerbread kernels.. they must work. PS: The ROM.zip already contain kernels that get installed when the zip is flashed.
Red Devil said:
Flash the gingerbread kernels.. they must work. PS: The ROM.zip already contain kernels that get installed when the zip is flashed.
Click to expand...
Click to collapse
where can i find those gingerbread kernels? so if they're inside the "rom.zip" is it possible to "extract" them to a flashable zip? only the kernel withouth the rom itself...?
Gingerbread kernels are in the Index of all kernels..
From the ROM.zip if you want to extract them then just extract the boot.img normally and also extract the modules from the zip .. in /system/lib..
In fastboot mode flash boot.img via :
Code:
fastboot flash boot boot.img
and
then via adb push the modules. I suggest you search a bit and find some answers yourself . Its easier that way cause these questions have been answered millions and millions of times. So use the search function
i've searched, and believe me when i say that i havnt found anything about this... all the kernels i go for, on the thread only talks about the kernel itself and not the roms compatible... and i've tried that method and got stuck on htc green logo... thanks for answering
these kernels work on stock rom:
1- cranium kernel
2- ateeq kernel
3- garuda's kernel
search them in the development thread I hope you'll find them.
i've tried all those kernels... one by one and never got passed the htc green logo... always get stuck there... i tried flashing trough fastboot and trough recovery... nothing works... any other suggetions?
try to flash ateeq rom then ateeq kernel..it works for me.
but i dont want to have ateeq rom, i want to stay with my stock rom, but change the kernel... only that. but thats for answering. i'm getting used to the idea that i cant be changed (the stock kernel).
thanks
Need urgent help
i had rooted my pico months back and was on different custom roms......now i want 2 get back to the stock rom which i have downloaded Odexed Stock ROM Flashable Zip (With Link2SD Support)(Revision 3)(http://forum.xda-developers.com/showpost.php?p=40385554&postcount=76) and i have flashed this rom 5 - 10 times and everytime i reboot after flashing the rom.....i am stuck on htc boot logo.....can u plssssss help

[J] Can't boot into recovery

Hi all!
A while ago I installed Vengeance kernel 1.40 on my Xperia J to avail of the 1.3ghz OC feature. I am running stock firmware (.31) When I first installed Vengeance I had no problem booting into recovery, but for some reason, I can't anymore. Any help would be appreciated!
Thanks in advance!
cwm
Try to reinstall CWM from here http://forum.xda-developers.com/showthread.php?t=2034639&highlight=cwm
and read this sentence "Dont restore factory setting or else CWM will vanish...n u hav to reflash whole firmware again " from here http://forum.xda-developers.com/showthread.php?t=2033114
Maybe its help

[Q] Tipo Dual BootLoop & Installation Order Question

Hello everyone. Please don't ignore the question just looking at the length. I think many newbies have these kinds of doubts. I have tried to explain as best and simple as I can.
I've recently got a Tipo Dual (st21i2). It had a Stock ROM installed in it. I wanted to remove it so I did following things in given order.
1. Rooted the phone with Bin4ry's Rootkit
2. Installed custom recovery CWM.
3. Took backup of original ROM
Then I wanted to install a new one ROM & Kernel, so next
4. Using CWM, installed Gimlo firmware & Gimlo ROM 2.0 as explained here. The new ROM was working properly.
5. I took a backup of this newly installed ROM, using CWM.
Then I wanted to install Vengeance Kernel from here. So I tried to install it by using Flashtool 0.9.14.0. Flashtool gave me an error "The phone must be rooted first". At that point I had already rooted my phone.
By doing a little Googling I found out that I had to unlock my bootloader to install custom kernel (I had a misconception that installing custom recovery unlocks the bootloader also).
6. So I successfully unlocked the bootloader using same Flashtool and unlock code from Sony's website. Then,
7. I installed the Vengeance Kernel (again using Flashtool). It installed successfully as per the log. And it installed TWRP recovery with it.
Then after restarting I have got a bootloop. It is stuck at boot animation (custom Xperia Z boot animation). Tried to remove battery and starting it after a while, tried keeping it off for a night, didn't work.
At this point I have the
a) Backup of old ROM
b) Able to load TWRP recovery.
So I'm in a safe place and I can restore my phone.
But still I want to use Vengeance Kernel with Gimlo.
So my questions are
1. Am I doing anything wrong?
2. I read while researching that the correct order of installation is Custom ROM --> Custom Kernel. Is it correct? If not then what should be the correct order?
3. I also read somewhere that after installing ROM --> Kernel, I have to flash the ROM again. Is it true?
4. Is there any better ROM-Kernel combination than the one I am using?
5. Can I solve the bootloop without having to Restore/Install again? (Maybe by wiping caches or any other option in recovery, I don't know what those functions actually do so I didn't try anything).
1. Are you sure Vengeance supports Gimlo?
2. If so, follow this procedure.
1. Make a backup of all your apps
2. Flash a stock ftf, the one Gimlo is based one(make sure you wipe data and cache in Flashtool)
2. Place Gimlo on your SD card.
3. Flash the Vengeance kernel.
4. Boot into recovery and flash the ROM. Follow the required installation procedure provided in the Gimlo thread.
5. Power off the phone an flash Vengeance again.
6. Boot into your system.
If you are sure Vengeance is based on stock and on the sane firmware a Gimlo, this procedure should do the trick.
Hope that helps!
Mats
Sent from my C1505 using XDA Premium 4 mobile app
Thanks for reply.
On Gimlo's thread
"it also supports both custom and stock kernels"
On Vengeance's thread
"Kernel is compatible with all stock JB/ICS based ROM's"
Sorry if this is a stupid question.
Why I have to install stock tft --> Vengeance kernel first then again flash the Gimlo ROM --> Vengeance kernel?
Isn't it same as making a fresh install (of Gimlo over stock)? If it is, then what is the use of installing Stock tft first?
hardikT said:
Thanks for reply.
On Gimlo's thread
"it also supports both custom and stock kernels"
On Vengeance's thread
"Kernel is compatible with all stock JB/ICS based ROM's"
Sorry if this is a stupid question.
Why I have to install stock tft --> Vengeance kernel first then again flash the Gimlo ROM --> Vengeance kernel?
Isn't it same as making a fresh install (of Gimlo over stock)? If it is, then what is the use of installing Stock tft first?
Click to expand...
Click to collapse
To be completely fresh. That's it.
If flashing the Vengeance kernel doesn't work while you are on Gimlo, this is your only option.
It may take a while, but when it's done, you finally have Vengeance
Mats
Sent from my C1505 using XDA Premium 4 mobile app

Xperia J and Doomsday Rom

I have no idea what I am doing wrong.
Unlocked bootloader. Went back to stock (ICS), rooted. Went to the FAQ to try to install CWM, downloaded boot.img, flashed, got into cwm, installed Doomsday rom(made sure to wipe everything), and my phone is stuck in bootlock(Sony Screen).
I got the v2 download link. Also I would like to go with the Vengence Kernal but no clue when to install that.
Its JB
Doomsday is jb based. so you should first flash 11.2.A.0.31 ftf.

Categories

Resources