Related
This is just a relay thread but, please, full read it and then, if you dare, jump to the master one!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Doc_cheilvenerdi.org said:
Free Memory to > 1Gb!
How to Increase your Internal Memory Size with very low effort!
NOTICE: This method works both on Rooted and NOT Rooted Phones!
You simply need to meet three easy requirements:
Stock Firmware installed on the Phone (custom ROMS not supported ...They don't need to!)
A microSD with two primary formatted partitions inside (the former 'to FAT32' and the latter 'to EXT4' filesystems)
Ready to Flash to your Galaxy Mini via Odin
NOTICE: The following Black Box Howto is explained deep inside in post n. 2 and from post n. 52 to post 54!
...
Click to expand...
Click to collapse
Last Year, on December 18, I started the quoted thread for Galaxy Mini, showing a tweak useful to Increase the Internal Memory Size on Stock ROMs simply switching the data filesystem to the second partition of the microSD...
Benefits and disadvantages of this tweak are fully explained and discussed in the quoted Thread.
Question: Why I'm posting here, then?
Answer:
I received requests about tweaking the FIT boot images too...
I studied the FIT kernel vs Mini one and figured out that they are pretty equals (actually they full-match each other but only few stuffs related to post boot hardware detection)
I tried and made few images for FIT, which are shared in post n. 56 of the quoted thread, but - owning a Galaxy Mini - I was not able to test them...
...till now...
...
Angry about that and waiting for beta testers for them, I compared deep inside Galaxy Mini and Galaxy FIT...
Surprise: If I call them TWINS, the mistake is not so a mistake:
...At Kernel Layer they match each other...
...the bootloaders call the kernel at same memory address...
...boot sequences via ramdisk completely equal...
...system libraries are exactly the same...
...system software and leftovers too...
The only hardware differences don't really need to modify the boot sequence!
THAT'S ALL: I simply tested the FIT images on my Mini and they ends up and running...
THEY WORK!
What's Now?
I'll not repeat the Flashing procedure with Odin - you can read it on the quoted thread - but here are the FIT boot images actually modded and shared:
PDA=S5670DDKT3
PDA=S5670DXKPB
PDA=S5670DXKT4
PDA=S5670JPKQ7
PDA=S5670LUBKP6
PDA=S5670LUBKPI
PDA=S5670XWKTI
PDA=S5670XXKPQ
Your firmware is not listed? ...let me know!
Obviously you need Odin and Ops file ready for your phone model and not the Mini one...
- - -
Doc_cheilvenerdi.org said:
How does it Work:
Scenario 1:
I switch on the Phone, without a MicroSD slotted in or with a microSD with a single FAT32 partition (broken or damaged microSD also suite this scenario...); GingerBread boots as usual!
No Difference!
Scenario 2:
I switch on The Phone with a microSD slotted in (with the second partition formatted as EXT4 filesystem but still EMPTY); Ginger boots acting as if
/data
is completely moved outside to microSD but just WIPED (not true obviously, and the original /data is safe inside the phone), so it resettle it from beginning...
NOTICE:
...If your second partition is 1Gb wide...
...your new Internal Memory will be 1Gb wide...
Scenario 3:
I switch on the Phone with the second partition of the microsd (EXT4) up and running (already resettled up for use and with my userdata on it); Ginger simply boots with
/data
moved outside to microSD with your userdata there and tons of apps just installed from the market...
Click to expand...
Click to collapse
- - -
Doc_cheilvenerdi.org said:
NOTICES & ADVICES:
If I want to remove the microSD from the slot, FIRST I NEED TO SWITCH OFF THE PHONE!
When I install apps from the Market, Ginger Misunderstands the actual new Internal Memory SIZE and puts the apk files to External Storage anyway! I simply need to move them "to the phone" via "Settings menu" immediately after!
When I switch on the Phone without the microSD, I boot using the original /data inside the phone, actually loosing all the apps installed onto the external one untill next boot with SDcard; and, of course, loosing my sms stored there and others personal userdata too.
Unfortunately this boot image heavy conflicts with Link2SD (great app anyway!), so you must choose one: This Boot image or Link2SD... not both... sorry!
Click to expand...
Click to collapse
- - -
Don't You Like the boot image just installed and You want to revert without flashing the full firmware to the Phone?
Here are the original images ready for Odin:
PDA=S5670DDKT3
PDA=S5670DXKPB
PDA=S5670DXKT4
PDA=S5670JPKQ7
PDA=S5670LUBKP6
PDA=S5670LUBKPI
PDA=S5670XWKTI
PDA=S5670XXKPQ
Thread News!
Have you got an "unsigned update.zip capable recovery"?
Here a list of update.zip files ready to flash without Odin:
PDA=update-S5670JPKQ7.zip
PDA=update-S5670XWKTI.zip
I'm from Europe. I have installed S5670XXKPQ. Can something be done for this firmware?
Nice! Thank you, you made it for latin america version
Enviado desde mi GT-S5670L usando Tapatalk
New Image Added!
ZmisiS said:
I'm from Europe. I have installed S5670XXKPQ. Can something be done for this firmware?
Click to expand...
Click to collapse
NEW BOOT IMAGES ADDED!
Just added this boot.img (First Post for downloads):
S5670XXKPQ (2.3.6)
Doc_cheilvenerdi.org said:
NEW BOOT IMAGES ADDED!
Just added this boot.img (First Post for downloads):
S5670XXKPQ (2.3.6)
Click to expand...
Click to collapse
Thanks for this.
I forgot to mention that I have installed OC 844 MHz Kernel. Because it does not work for me. I have to reinstall and then try.
Don't work for me.
SD Make-up!
When you get true internal memory size even after tweak, something went wrong while making 2nd partition on SD...
You should first check How you made the second partition on your SD Card...
You can resize the first one (FAT32) or start from scratch (two new empty partitions); anyway, They both must be primary and the 2nd must be EXT4 newly formatted (mandatory).
If you feel you've done right, you could check what's happened with an app I just wrote to check the 2nd filesystem for errors. You can find it here; it's a Beta Version but fully working...
Read carefully the post and, eventually, give it a try.
P.S. It seems, otherwise, that you shoud partition your SD out of the phone (USB or MMC adapter needed). Actually Everybody who asked me for the same troubleshooting, solved it using Minitool Partition Wizard on Windows or GParted on Linux, BUT acting on the SD outside of the Phone!
P.S.2 No need to flash again! If the phone booted, the image is up and running fine...
I used USB, opened Mini Tool Partition Wizard, wiped all the SD, Apple, made a primary FAT32 partition, created a primary ext4 partition, Apple, waited till everything is over and that's it.
The problem remains the same.
Again flashed PDA S5670XXKPQ = (2.3.6) and same problem again.
apple style partition?
---------- Post added at 02:42 PM ---------- Previous post was at 02:42 PM ----------
MBR/GUID wont work?
Thanks! Gud work!
Doc_cheilvenerdi.org said:
When you get true internal memory size even after tweak, something went wrong while making 2nd partition on SD...
You should first check How you made the second partition on your SD Card...
You can resize the first one (FAT32) or start from scratch (two new empty partitions); anyway, They both must be primary and the 2nd must be EXT4 newly formatted (mandatory).
If you feel you've done right, you could check what's happened with an app I just wrote to check the 2nd filesystem for errors. You can find it here; it's a Beta Version but fully working...
Read carefully the post and, eventually, give it a try.
P.S. It seems, otherwise, that you shoud partition your SD out of the phone (USB or MMC adapter needed). Actually Everybody who asked me for the same troubleshooting, solved it using Minitool Partition Wizard on Windows or GParted on Linux, BUT acting on the SD outside of the Phone!
P.S.2 No need to flash again! If the phone booted, the image is up and running fine...
Click to expand...
Click to collapse
Now work. Thanks.
Doc_cheilvenerdi.org said:
This is just a relay thread but, please, full read it and then, if you dare, jump to the master one!
- - -
- - -
- - -
Click to expand...
Click to collapse
thnx for your thread..
Btw can u tell me wat lines or files should v add in boot.img to have this memory hack ..??
using G FIT
Everything shared!
amn_grg said:
... wat lines or files should v add in boot.img to have this memory hack ..??
Click to expand...
Click to collapse
It's all explained in post n. 2 and, deep inside, from post n. 52 to post 54 of the master thread referenced in the beginning.
There you can find links to scripts, source codes and binaries that I used...
...Everything you need to do it on your own!
i m from indonesia S5670DXKPB
Is this true?? Add more size my internal memory or......???
Sent from my GT-S5670 using XDA App
Added Image and Thanks!
NEW BOOT IMAGE ADDED!
Just added this boot.img (First Post for downloads):
S5670DXKPB (2.3.4)
CREDITS:
And many Thanks to Maleficus90 cool who helped me out, while testing SDcard's performance on LUBKP6 PDA boot image!
i m from romania S5670XWKQ(2.3.4)
spaga said:
i m from romania S5670XWKQ(2.3.4)
Click to expand...
Click to collapse
I think that you can use S5670XXKPQ (2.3.6) and S5670XWKT2 (2.3.6). It is for Europe.
S5670XXKPQ is official firmware. I checked on the KIES Samsung.
New images...
NEW BOOT IMAGES ADDED!
Just added this boot.img (First Post for downloads):
S5670DDKT3 (2.3.6)
i am using cyanogenmode 7.2 and my baseband version is ddkt2...so can i use ddkt3 boot.image?
Star B943 (B94M) MTK6589 Quad Core 4.5Inch 1GB RAM 4GB ROM Dual Camera 5.0MP+12MP WCDMA 3G Dual SIM Card SmartpPhone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please pay attention, there are two versions of this devices on the Market!!!
One is with Dualcore and the other one is with Quadcore MTK6589.
So be carefully with Flashing and Rooting the devices.
There is already some progress with CWM and Root on German chinamobiles.org Forum.
-------------------------------------------------------- Testing LeWa Port Rom -------------------------------------------------------------------------------
Update 07.05.2013: LeWaport_Star_B94M_22.05.13_cm08
My friends here comes a new LeWaport (cmod08) based on the stable release for Amoi N828.
If your already on lewa simple make backup, install cmod08.zip, wipe dalvik and cache after install, all others look instructions below.
Known bugs: Wifi nvrambug, with my fix bluetooh is only working after factory reset or resore data.
Update 07.05.2013: LeWaport_Star_B94M_08.05.13_cm04
Dear friends of LeWa here is a Test version based on LeWa Amoi N828
This version is rooted with gapps, no need to load these.
Hints for install:
1. Boot to CWM or TWRP Recovery
2. Make backup including boot and recovery ( TWRP 2.5.0.0 will be installed )
3. Wipe System partition
4. Install LeWaport_Star_B94M_07.05.13_cm03.zip
6. Reboot and be happy
Known errors: some chinese apps and strings, noLED patch still needed
Further steps: bugfixing, try to port multilanguage support (don´t hesitate to help )
New logo needed
-------------------------------------------------------- Hints for 4.2.1 -------------------------------------------------------------------------------
Update 03.05.2013: Batterylive improvement
User slein has submitted selfcoded apk for LED Fix ! Thanks to him!!!!
There are a lot of activities to fix sporadical battery drain. Following APK seems to be workaround install the app and disable LED notification with widget. Thx to all testers!
Good Batterytool
Update 26.04.2013: Japanese 4.2.1 JB-image from needrom
Well running 4.2.1 from needrom
for most users, please read carefully instructions, do backup (Titanium and/or CWM/TWRP) before update
and make Factory reset as described, to avoid most problems!
Howto Root 4.2.1 and GPS-Fix by JBrandtner
---------------------------- Hints for 4.1.2. --------------------------------------------------------
Update 18.04.2013: Wifi Mac change Fix ( Thx to okupka )
- use these file (make backup before!!!) with this guide and you are done
Update 12.04.2013: Different Sound improvements
People who have problems with sound try this link from Zopo-Forum
or from Patchworkoftips
Update 11.04.2013: Data Resize partition to 2.74GB Detailed description from here
1. We backup with recovery.
2. Unloaded and 2.74GB decompressed data (Thx to spanish friends! ).
3. SP Open Flashtool and as we have done before installing the recovery in scatter-loading MT6589_Android_scatter_emmc.txt select the file in the folder where we unzipped 2.74GB Data
4. We ensure that only EBR1 and EBR2 are marked.
5. We Give to Download, accept the prompt, connect via USB the phone off the PC. As with the recovery if the process fails, disconnect the cable, remove and put the battery and repeat this step.
6. If all goes well, will back the green circle. Disconnect the phone from the PC.
7. Now we go back to recovery (Turn on the phone by holding the power key + volume +).
8. In the recovery do wipe data / factory reset.
9. Optionally if you want to restore the data and installed applications we advance restore, choose the backup you made in step 1, and finally we give to Restore data.
10. Reboot from recovery. In this first boot after repartitioning we may see a notification saying the phone storage is damaged, then click in it. It will show a dialog box asking if you want to format the SD card, does not refer to the External SD but the phone's internal memory, so we do not fear clicking on Format. After doing the latter, voila, you have the Data partition (where apps are installed) extended to 2.74GB
Update 08.04.2013: 3G improvement
if phone is already root
Install from market the mobileuncle tools.
-> enter engineer mode (MTK).
-in modemtestactivity change "factory" for "telephone".
-in "band mode" GSM mode uncheck the "PCS1900."
New TWRP 2.4.4.0 Recovery available here
Update 03.04.2013: Networklocation Fix
by radekfor: i think i solved cell location problem.
Simply install latest Gapps for JB 4.1.2
Click to expand...
Click to collapse
http://goo.im/gapps/gapps-jb-20121011-signed.zip
-> boot to Recovery ( Mobileuncle Tools, or Quickboot,.... ) -> Install zip from SD-Card , ....
Update 28.03.2013: Working on JB 4.1.2
Here you go at your own risk
Drivers;
CWM 5504 and Root here;
German instruction here
New SP_Flash_Tool_v3.1304.0.119
After extracting the zip file:
1. Debug Mode in the Developer Tools Switch
2. Install the drivers ( others may work better, e.g. pdanet )
3. The superuser-313-arm-signed.zip from third copy to the external SD card
4. Phone off and take out battery
5. using the SPFTools load in directory 2. Scatterdatei -> load and Recovery.img, boot.img and flash (press download and then return battery back)
6. Disconnect the data cable after green OK
7. When switching power and Vol + hold when the Green Man comes release Power and Vol + hold on.
8. In CWM now make complete backup, after this install zip from SDcard install the superuser zip ... JB 4.2.1 may need other tools look here found by #90
9. skip step 7 +8 and install superuser using the MTKdroidtools and make backup (but it takes a relatively long time)
10. You can now delete with MTK Droidtool some China-apps."
PS: Backup Rom made with SPFtools->readback
Thanks for the alert.
I've got a quad core 6589 version, so far cannot find a way to root it..
And it's NetworkLocation.apk is missing, i tried a couple of NetworkLocation.apk from JellyBean gapps zip files, no one seems to work, either not installable, crash on boot or not working.
3G connection seems to be dodgy, H/H+ is shown on the top bar but data is not coming down normally, during 1 minute, only less than 100k data come down and not able to load even 1 page...
Anyone has the same problem?
Cheers,
Fish
star b943 (mtk6589 b94m)
could someone translate recovery menu from Chinese Language
Yes the baseband or antennas seems to be crap.
Start download and remove your hands from the device or take it only with two fingers on the upper side, then my downlads finish and downloads show normal values. Speedtest with upload is seems to be fine,...
If someone needs root or cwm write me pm, or give me public upload location I´m not so experienced with this,...
Best regards
Thanks for the advice
radekfor said:
could someone translate recovery menu from Chinese Language
Click to expand...
Click to collapse
Translate into:
-Factory Reset
-Auto (Overall?) Test
-Manual (Overall?) Test
-Single Function Test
-Test report
-Clear eMMC
-Version Info
-Reboot
Hope this helping.:laugh:
how do you think about the Star N9589?
with same quad core cpu mt6589
haisir said:
how do you think about the Star N9589?
with same quad core cpu mt6589
Click to expand...
Click to collapse
The MT6589 is really good stuff, for me its my personal Favorite , but I would prefer smaller devices with 4-4,7" max screensize.
5,5" and higher does not really fit in any shirt pocket. If I ever have to carry a bag for my phone I would prefer a tablet with much better screens and battery life.
So i´m looking forward to Jiayu G4, G5, UMI X1S, or something similar screensize
cmoegele said:
Update 28.03.2013:
Here you go at your own risk CWM 5504 and Root
Best regards
Click to expand...
Click to collapse
That's great!!!!
Thanks, it worked!
Now I still have two problems:
- amazon app-shop doesn't start (it remains black with amazon logo)
- doesn't vibrate on call in vibration mode
does someone else have the same problems?
Thanks
B94M/B943 quad
Thank you everyone for your hard work and time. I have very little experience (twice with well established models)
I was wondering if someone could clean up the txt instruction translation so someone like me can avoid brick making. Even adding better detail would be sweet. I will copy below. Thanks in advance.
"ATTENTION: The Star B94M is available as dual and quad core version!
The tools here refer exclusively to Star B94M MTK6589 or B943 quadcore devices!
After extracting the zip file:
1. Debug Mode in the Developer Tools Switch
2. Install the drivers
3. The superuser-313-arm-signed.zip from third copy to the external SD card
4. Phone off and take out battery
5. using the SPFTools load in directory 2. Scatterdatei -> load and Recovery.img, boot.img and flash (press download and then return battery back)
6. Disconnect the data cable after green OK
7. When switching power and Vol + hold when the Green Man comes release Power and Vol + hold on.
8. In CWM now either only make complete backup, or install zip from SDcard install the superuser zip ...
9. skip step 7 +8 and install superuser using the MTKdroidtools and make backup (but it takes a relatively long time)
10. You can now delete with MTK Droidtool some China-apps."
bradstallion said:
That's great!!!!
Thanks, it worked!
Now I still have two problems:
- amazon app-shop doesn't start (it remains black with amazon logo)
- doesn't vibrate on call in vibration mode
does someone else have the same problems?
Thanks
Click to expand...
Click to collapse
vibration problem was a wrong setting by my side... still have problems with amazon app-shop (very strange, I've it installed on many devices and different versions of android, jelly bean included)
angryfish99 said:
Thanks for the alert.
I've got a quad core 6589 version, so far cannot find a way to root it..
And it's NetworkLocation.apk is missing, i tried a couple of NetworkLocation.apk from JellyBean gapps zip files, no one seems to work, either not installable, crash on boot or not working.
3G connection seems to be dodgy, H/H+ is shown on the top bar but data is not coming down normally, during 1 minute, only less than 100k data come down and not able to load even 1 page...
Anyone has the same problem?
Cheers,
Fish
Click to expand...
Click to collapse
The MTK chipsets have always been weak on data connection starting from the MTK6573. It's so bad that connection can be lost while my Samsung right beside it has a good connection.
Anybody knows what is wrong with this China made phones?
Star
I managed to root. Thanks for the help guys (sarcasm).......The files that "cmoegele" posted worked except for the usb driver files. I had to use PdAnet for connection. I'll be watching to see what other members find on the camera focus and poor data comms.
Thank You
Data upload is stable, and downlad has good values for a while, but slows down from time to time. So I think the device is not doing completly wrong. There needs to be still some finetuning in Baseband and Rom like man other devices always need.
The performance and quality is really good, even +2 days Batter lifetime is a good value for this powerful device.
I´m waiting for new Roms
fmehrtens said:
I managed to root. Thanks for the help guys (sarcasm).......The files that "cmoegele" posted worked except for the usb driver files. I had to use PdAnet for connection. I'll be watching to see what other members find on the camera focus and poor data comms.
Thank You
Click to expand...
Click to collapse
Hi fmehrtens, may I know the RAM and ROM capacity of your phone model? I am wondering if 8GB ROM and 1GB RAM model can be rooted using same method, thanks.
Spec says 8GB ROM and 1GB RAM, however AnTuTu shows only 1GB ROM and 1GB RAM. Am I missing anything here?
Hello,
I've ordered this new phone Star One B943 Quad core, and i want to thank u for the rooting method ^^
I'm searching for the ROM stock, does anyone have the idea where i can find it ?
And i found that the Miz Z1 is the same phone, but with Android 4.2.1 installed. Do u think it's possible to upgrade the Star OS version with the Miz Z1 firmware ?
B934
windwaver said:
Hi fmehrtens, may I know the RAM and ROM capacity of your phone model? I am wondering if 8GB ROM and 1GB RAM model can be rooted using same method, thanks.
Click to expand...
Click to collapse
It is a 4G ROM and 1G RAM. Just FYI, the first time I tried to root it did not root, I had to try it a couple of times, and then I also loaded the ZIP file on the ROM memory along with the SD card. It worked that time. Not sure if that's what helped or not. The phone is a really nice phone ecpecially after rooting. I am also having trouble with Amazon App store app, Netflix playing too slow and the camera focus.
Good Luck and Thanks!
Neodragon12 said:
Hello,
I've ordered this new phone Star One B943 Quad core, and i want to thank u for the rooting method ^^
I'm searching for the ROM stock, does anyone have the idea where i can find it ?
And i found that the Miz Z1 is the same phone, but with Android 4.2.1 installed. Do u think it's possible to upgrade the Star OS version with the Miz Z1 firmware ?
Click to expand...
Click to collapse
I have got a Copy of the origin Rom done with SPFTools. If it is needed. You also can use the Scatterfile from the zip-file.
Do you have a link for the 4.2.1 Miz Z1 firmware ? Perhaps its a fake,...
Otherwise I will flash it to our device except the Preloader, so if it fails I could go back to stock.
cmoegele said:
Data upload is stable, and downlad has good values for a while, but slows down from time to time. So I think the device is not doing completly wrong. There needs to be still some finetuning in Baseband and Rom like man other devices always need.
The performance and quality is really good, even +2 days Batter lifetime is a good value for this powerful device.
I´m waiting for new Roms
Click to expand...
Click to collapse
May I know the country you using the phone in? I have very bad experience with MTK chipsets with regards to data transfer. Other phones e.g. Samsung, LG do not give me this problem.
How to improve the data performance?
Hello :laugh:,
I have an ZTE Grand Memo V9815 N5 Flagship Phone APQ8064 Quad Core 2G 16G Android 4.1.2 5.7inch from China, and i was wandering if anyone allready has found something to Root this device.
I have tried the standard superoneclick, but thats not working and crashes when in progress.:silly:
I want to root it, cause i need Google play on it. I have installed Google Services/Google Framework, and i can setup an account in Google Play, but after the account stuff Google Framework/Google Services/Youtube service/Google Play crashes constantly
So i contacted ZTE for support, but there is no Rom, or any update for this phone.
I googled some, and at some websites they wrote to Root the device, so its not crashing anymore.
Please help me to get Root on my phone, so i can install Google Play Store.
Thanks in Advance !!
Same problem
Hello Reppo,
I have the same problem. I am not able to root this fantastic phone ... I need to install Google Play on ti .. :crying:
Please advise me if you will find the rooting procedure for ZTE N5 Grand Memo.
Ciao!
Alfredo
alphredo said:
Hello Reppo,
I have the same problem. I am not able to root this fantastic phone ... I need to install Google Play on ti .. :crying:
Please advise me if you will find the rooting procedure for ZTE N5 Grand Memo.
Ciao!
Alfredo
Click to expand...
Click to collapse
I've root Grand memo. What's your specific problems? Did you install unofficial recovery and ADB drive?
HI 123sharon456,
I have no idea how to do it.
I just need procedure and also advice about where to find all the requested files.
Can you give me some advice?
Thanks!
123sharon456 said:
I've root Grand memo. What's your specific problems? Did you install unofficial recovery and ADB drive?
Click to expand...
Click to collapse
alphredo said:
HI 123sharon456,
I have no idea how to do it.
I just need procedure and also advice about where to find all the requested files.
Can you give me some advice?
Thanks!
Click to expand...
Click to collapse
1. Install driver
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Check your device manager. If it looks like the image follows, it means your ADB driver does not been installed successful.
This is the successful status.
If you can't install ADB driver by automatic installation. You can install ZTE Join Me(mobile phone manager software), it will intall ADB.
2. Recovery
Extract it into any directory.
Click flashrecovery.cmd (antepenultimate) to this interface:
It will run automatically and reboot your phone. If not, reboot your phone and computer, then try again.
If everything is fine, try to enter the recovery.
Shutdown the phone, pressing on volume key by right hand + pressing on power key by left hand. When you see the screen light up and feel the vibration, release the power button. KEEP PRESS ON VOLUME KEY until you see the recovery interface.
-upgrade your system from SD card
-use slideload to upgrade your system
-wipe out data/restore the factory data
-wipe out cache
-backup and restore
-mount and storage
-advanced options
-shutdown
Choose
-wipe out data/restore the factory data
-wipe out cache
and
-upgrade your system from SD card (copy this ROOT ROM in your SD card, and choose it in this step http://dl.xda-developers.com/attach...832b60d/5192289d/1/9/6/1/1/6/8/rootforN52.zip)
LOOK LUCK
123sharon456 said:
1. Install driver
Check your device manager. If it looks like the image follows, it means your ADB driver does not been installed successful.
This is the successful status.
If you can't install ADB driver by automatic installation. You can install ZTE Join Me(mobile phone manager software), it will intall ADB.
2. Recovery
Extract it into any directory.
Click flashrecovery.cmd (antepenultimate) to this interface:
It will run automatically and reboot your phone. If not, reboot your phone and computer, then try again.
If everything is fine, try to enter the recovery.
Shutdown the phone, pressing on volume key by right hand + pressing on power key by left hand. When you see the screen light up and feel the vibration, release the power button. KEEP PRESS ON VOLUME KEY until you see the recovery interface.
-upgrade your system from SD card
-use slideload to upgrade your system
-wipe out data/restore the factory data
-wipe out cache
-backup and restore
-mount and storage
-advanced options
-shutdown
Choose
-wipe out data/restore the factory data
-wipe out cache
and
-upgrade your system from SD card (copy this ROOT ROM in your SD card, and choose it in this step http://dl.xda-developers.com/attach...832b60d/5192289d/1/9/6/1/1/6/8/rootforN52.zip)
LOOK LUCK
Click to expand...
Click to collapse
Thanks A lot,
Im gonna try this, and will tell here about if it worked or not
Reppo1911 said:
Thanks A lot,
Im gonna try this, and will tell here about if it worked or not
Click to expand...
Click to collapse
Dear Sharon,
The link is broken for the RootforN52
Can you please put a good link on it ?
shrewd supllice
Reppo1911 said:
Thanks A lot,
Im gonna try this, and will tell here about if it worked or not
Click to expand...
Click to collapse
Im stucked at the Flashrecovery thing.
How do i open this adb folder, cause i dont have that one.
I have the ZTE Joinme installed, and now what?
Where do i find these recovery files, which i need to extract.
Please help me out, im kinda noobie in this stuff
Reppo1911 said:
Thanks A lot,
Im gonna try this, and will tell here about if it worked or not
Click to expand...
Click to collapse
where can i download unofficial recovery for grand memo
visarya said:
where can i download unofficial recovery for grand memo
Click to expand...
Click to collapse
you can find it here:
needrom.com/mobile/zte-n5/[/url]
I cant set the full link cause i did not more then 10 posts
Good!
took weeks breaking my head up late at night from surfing the net to find some way to rooting this stunning smartphone. But I've been stuck due to no knowledge of ADB commands and of course having no Chinese idea, since supposedly there's an app that automatically Root the phone, but I can not make it work.
Having my disability, I share with you all the information and resources I've got to give you hope someone knows the correct usage.
And it is a shame that a HIGH terminal does not remove all power performance not ROOT and therefore can not set you GAPPS
Web Recovery 4.2.2 ROM and instructions: w w w needrom com/mobile/zte-n5/ (Requires registration, but I am uploading files to my Dropbox so it is not necessary)
* Chinese Subforum: w w w zhongxingfans com/forum-560-1.html (Registration is required, I can spend my MP user you're needed)
* Chinese Tutorial on previous subforum: w w w zhongxingfans com/thread-51487-1-1.html
* Other Chinese Subforum: w w w popfen com/forum.php?mod=forumdisplay&fid=65&filter=typeid&typeid=167 (Same as above, I have also user)
*Another one: www gaojiquan com/forum-ZTEN5-1.html (I'm not registered, I think)
* DropBox folder with everything I've coseguido, even assuming the mobile program that automatically Root: w w w dropbox com/sh/ap64zaexa5sa8op/we9TXWX
* Future tutorials: h t tp : // es.ready2root.com/info/grand-memo-n5 (Now is empty)
[/ LIST]
Hope you have better luck than me, and if they have some known to speak Chinese would be helpful to us.
NOTE: These is a google traducction from a another post from a spanish forum, if you have problems with the links, you can go to the original post here: www . htcmania . com/showthread.php?t=664705
Found this on a chinese website, its not for root, but for better performance of the ZTE N5 :laugh:
Just translate the page with Google Chrome standard translator, and you will understand.
(im still not able to set full links )
link for website:
h t t p ://sjbbs. zol .com.cn/164/642_1635239 .html
link for download:
h t t p://devicedownload .zte. com.cn/cn/UpLoadFiles/product/0/242/soft/2013052815114637 .zip
Im still having the issue that i cannot install GOOGLE PLAY, anyone here that solved that problem???
I appreciate your help
Greets,
Reppo1911
How did you install cwm on zte v9815 please?
CCR
Reppo1911 said:
Thanks A lot,
Im gonna try this, and will tell here about if it worked or not
Click to expand...
Click to collapse
Hello,
Is there some lock in EU phones whereas at the end of the aforementioned process the phone does shutdown and remains, the terminal is waiting for device..., rebooting in system recovery cwm is still missing and every sideload fails, any clue? People on the River would be Happy to give from a remote location.
hxxp://postimg.org/image/42tvojjvh/
ps: all I obtain is this->hxxp://postimg.org/image/blbyq6khf/332da320/
Freedom and Democracy shouldn't mean being jailed within some digital cell while paying for acquiring it: Amendments.
Can anyone give detailed directions?
I just got the device. I tried installing a google play store apk (tried a few different versions) all installed but none work.
How can I install the play store? Do I have to root the device? If so, are there detailed (English) instructions somewhere?
Someone knows if the Mobileuncle MTK Tools can root zte v5? I need to find a" one-click" app...
Partial success
I have installed the rom from needrom for the N5 android v 4.2.2. Took a while to flash the recovery, which is in chainese (driver issues). But still have serious connections issues:
The 3G network disconnects on restart and takes forever to reconnect. Wifi doesn't work! Built in keyboard is awful and also... chainese!
But it is rooted and has the google apps.
Does any one recommend a better combination of recovery and rom?
This is my wife's phone and she is having a lot of trouble with it.
Monsanto
yanay zimran said:
I have installed the rom from needrom for the N5 android v 4.2.2. Took a while to flash the recovery, which is in chainese (driver issues). But still have serious connections issues:
The 3G network disconnects on restart and takes forever to reconnect. Wifi doesn't work! Built in keyboard is awful and also... chainese!
But it is rooted and has the google apps.
Does any one recommend a better combination of recovery and rom?
This is my wife's phone and she is having a lot of trouble with it.
Click to expand...
Click to collapse
How do you flash a Custom rom we cannot even install cwm?
I wrote the Valorous Chinese told me to ask somebody elsee hence I sorry under God shall wish China a Genuine Bankruptcy for denying us Private Property, Communism is a mental disease our Lord should Treat. hxxp://en.wikipedia.org/wiki/Orange,_Vaucluse
How to?
JPWK said:
How do you flash a Custom rom we cannot even install cwm?
I wrote the Valorous Chinese told me to ask somebody elsee hence I sorry under God shall wish China a Genuine Bankruptcy for denying us Private Property, Communism is a mental disease our Lord should Treat. hxxp://en.wikipedia.org/wiki/Orange,_Vaucluse
Click to expand...
Click to collapse
I Followed downloaded the files from the dropbox posted upper in this thread. and followd the instructions in the previous page. Pay special attention to installing the driver for the divice. As soon as it reboots into bootloader it requires another driver.
Also if you must not restart the phone before flashing the rom otherwise it won't last.
perfect aarmewdd um in slack
yanay zimran said:
I Followed downloaded the files from the dropbox posted upper in this thread. and followd the instructions in the previous page. Pay special attention to installing the driver for the divice. As soon as it reboots into bootloader it requires another driver.
Also if you must not restart the phone before flashing the rom otherwise it won't last.
Click to expand...
Click to collapse
I am very Confident Folks bould ask ya about this driver thus they can rush downloading it like gold diggers to the root Saint Cloud very much
postimg.org/image/n6bj2rgyd/
Fuze (Q390) is an Android-powered smart phone sold by Cherry Mobile, a local brand in the Philippines. Fuze is powered by Mediatek MT6582 Quad-Core SoC (@1.3GHz), partnered with a 1GB RAM and is equipped with a 5.0in TN screen/display panel. Its SRP is 5,499 in Philippine Peso (or approximately US$125.00). Physically, it looks the same as the Micromax A96, but they differ internally (at least in the amount of RAM).
For more info, I recommend that you take a look at this in-depth, detailed review of this device (courtesy of [email protected])
Basic Specifications
CPU: Mediatek MT6582 (@1.3GHz) SoC
GPU: Mali 400MP
RAM: 1.0GB
Storage: 4GB (eMMC)
Display: 5.0" (TN panel, DragonTrail surface) @854 x 480 resolution
Camera: 8MP main / 1.3mp secondary
GPS: Yes
Bluetooth: Yes
WiFi: Yes
Sensors: Accelerometer, Proximity, Ambient Light
USB-OTG: Yes
SIM: Dual Standby
Battery: 4000mah
CMFuze Recovery Installer
CMFuze Recovery Installer
This app can be used to install TWRP for Fuze, CWM for Fuze or Fuze Stock Recovery. There's no need to download a separate recovery file. Its all in this app.
NOTES
Your phone needs to be rooted.
INSTRUCTIONS
Download the APK file
Install in your Fuze
Once installed, launch the app "CMFuze Recovery Installer"
Tap the recovery of your choice from the set of buttons
Confirm to Install
Reboot to recovery to test
DOWNLOADS (Kindly not mirror these files somewhere else without my knowledge/permission)
from mediafire
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THANKS TO
our Creator
TeamWin
ClockWorkMod
Android Open Source Comunity
[ROM] Genesis 1.0
This is simply a debloated stock ROM of CM Fuze
Features
init.d support enabled
zram (compcache) enabled (see compcache/zram at wikipedia)
zipalign on the fly (for newly installed apps)
Seeder (2.0)
Rooted (no SuperSU apk. just get it from PlayStore)
busybox with symlinks
debloated (only essential apps remained)
deodexed
zipaligned
Google boot animation
JB keyboard with swipe
There are no performance tweaks done, as its intention is to become the baseline for ROM porting.
Debloated - removed apps that are optional
removed CM apps and bundled apps
removed CM wallpapers
removed CM tones
removed Google apps that can be downloaded from PlayStore (Map, G+, Calendar, GMail, Notes, Voice Search, etc.)
remained are essential apps, enough to properly run Fuze.
removed faceunlock
removed voice unlock
removed day dreams
removed engineer mode
DOWNLOADS (Kindly not mirror these files somewhere else without my knowledge/permission)
ng0tkul4.CMFuze_GenesisV1.0.zip
INSTALLATION (requires custom recovery: CWM/TWRP)
Backup, backup, backup
Download the zip and flash via custom recovery
(Optional) Factory reset / Data, cache wipe
NOTE: Factory reset is optional, but it may cause bootloop if you didn't do factory reset.
THANKS TO
our Creator
Android Open Source Community
xda-devs
LewaOS v5 for Cherry Mobile Fuze
Flashable via TWRP/CWMR
Ported from official LeWaOSv5 for JIAYU G2F
Should work in all version of Fuze (v4, v5)
Rooted (Lewa is rooted)
Google Playstore included (just download other Google apps from PlayStore if you need them)
No tweaks
No voice unlock/face unlock (removed)
No engineering mode apps (get if from your stock ROM if you need it)
HOW TO INSTALL
Download the flashable zip file (and Google Apps - if you need it)
Install ROM (flash via TWRP/CWMR)
Do factory wipe (cache and data wipe)
DOWNLOADS (Kindly not mirror these files somewhere else without my knowledge/permission)
ng0tkul4.CMFuze_LeWaOS5.1_14.03.28.zip
BUGS
(you tell me...)
TO ENABLE ROOT
- Security Center -> Details -> Permission management -> Perm -> ROOT
THANKS TO
our Creator
Lewa OS5 team/devs (www.lewaos.com)
xda-devs
MIUIV5 for CM Fuze
MIUI V5 for Cherry Mobile Fuze
Flashable via TWRP/CWMR
Ported from Lenovo JIAYU J2F
Should work in all version of Fuze (v4, v5)
Rooted (MIUI is rooted -> Enable in Security App)
Google Playstore included (just download other Google apps from PlayStore if you need them)
No tweaks
No voice unlock/face unlock (removed)
NOTES
MIUI Torch/Flashlight does not work. Just download one from PlayStore like 'Simple Torch'
HOW TO INSTALL
Download the flashable zip file (and Google Apps - if you need it)
Install ROM (flash via TWRP/CWMR)
Do factory wipe (cache and data wipe)
DOWNLOADS (Kindly not mirror these files somewhere else without my knowledge/permission)
ng0tkul4.Fuze.MIUIv5_4.3.21.zip
BUGS
Torch/Flashlight
(you tell me...)
TO ENABLE ROOT
- Security App -> Permission -> Root Permission
THANKS TO
our Creator
MIUI devs (@miui.com)
[email protected] (for his MIUI port for G'Five A800)
[email protected] (for his miui porting guide)
xda-devs
<reserved 5>
thanks sir nice rom can you make not 3 or s4 rom
Nice job sir ... We are waiting for color OS...
colorOS
addictz10 said:
Nice job sir ... We are waiting for color OS...
Click to expand...
Click to collapse
ColorOS --- i'm hesitant to upload because it has few yet ignorable problems. it uses the GB/ICS's /sdcard0/external_sd approach to fetch and enum files... the effect is Oppo Music and Filemanager is failing to get the files (we can use different music player and filemanager). Also OTG storage mounts ok, but there's no easy way to properly unmount it (i.e. unmount via terminal) ... unlike LewaOS that there's an item in its "Storage" settings that can be used to properly/safely unmount the storage.
I will try again after two weeks...
ng0tkul4 said:
ColorOS --- i'm hesitant to upload because it has few yet ignorable problems. it uses the GB/ICS's /sdcard0/external_sd approach to fetch and enum files... the effect is Oppo Music and Filemanager is failing to get the files (we can use different music player and filemanager). Also OTG storage mounts ok, but there's no easy way to properly unmount it (i.e. unmount via terminal) ... unlike LewaOS that there's an item in its "Storage" settings that can be used to properly/safely unmount the storage.
I will try again after two weeks...
Click to expand...
Click to collapse
ok sir... Im still waiting for my fuze...
Just bought a Fuze, and wondering if my unit is defective or it really has issues with the edges of the touch screen. Whenever I use Touchpal X, I have trouble pressing the "a" key. I need to press slightly between "a" and "s" to get it to register.
I have the same issue with some games, when tapping on the very edge of the screen wont register. I have show touches enabled, and it shows the white circle, but the game won't respond at all. Any ideas? I'm running rooted stock rom with gravity box. The only other module i'm using is root cloak for avabel online.
Anyone have similar problems?
EDIT: Found the cause. I had Pie Controls set to 15px so it was eating a lot of screen space for activation. I disabled Pie and it works fine now
How to do screenshot..
Thanks in advance
Elucidator21 said:
How to do screenshot..
Thanks in advance
Click to expand...
Click to collapse
press volume down and power button at the same time..
I need help
I formatted my PC (due to virus) then my Backup for Cherry Mobile Fuze Q390 is lost.
Now my Q390 phone got corrupted and after formatting the phone Baseband is Unknown and IMEI is NULL. I need help by any chance any user with backup that I can use? I cannot write my IMEI because the phone its self has nothing to write on to. Phone is working can boot and etc except the baseband is gone and evidently no IMEI.
phaw16 said:
I formatted my PC (due to virus) then my Backup for Cherry Mobile Fuze Q390 is lost.
Now my Q390 phone got corrupted and after formatting the phone Baseband is Unknown and IMEI is NULL. I need help by any chance any user with backup that I can use? I cannot write my IMEI because the phone its self has nothing to write on to. Phone is working can boot and etc except the baseband is gone and evidently no IMEI.
Click to expand...
Click to collapse
if you can get hold of a NVRAM partition from others phone (not necessarily Q390 - at least same SoC: MT6582), then you can flash it to your phone.
BUT, your phone will have the same IMEI as the source phone. So if you and source phone would use the same SP (Service Provider or network), and IF this SP is strict about cloned IMEIs, they could block this IMEI. Leaving both phones unusable to this network. So if you can get hold of NVRAM partition from somebody living abroad (i.e. foreigner), the better.
if you are rooted, and terminal (adb shell) savvy, you can write it it via dd, i.e.:
$ dd if=/path/of/nvram of=/dev/nvram
or you can flash it via SPFT memory write ("Window" menu -> "Write Memory").
1) Select "Write Memory" tab (after it is shown)
2) Select "EMMC" for the memory setting
3) Select/browse ("Open Raw Data") the NVRAM image for the "File Path"
4) "Begin Address (Hex)" = 0x1800000
5) "Container Length (Hex)" = 0x500000
6) Click "Write Memory"
7) Connect your phone to PC (must be turned off as you may already know)
The NVRAM image could be named as nvram.bin or something else. But it must be a raw image of NVRAM partition (/dev/nvram) from other phone. TWRP can do a backup of this partition by selecting it when you are about to perform TWRP backup.
If you want to temporarily restore your IMEI, you can try MTKDroidTools or Mobile Uncle Tools (apk)
LeWaOSV5.1 for CMFuze
- apps that show as 0.00kb in "All" and "Downloaded" are now shown ok
- added engineering mode to settings
- corrected some misspeling in english translation
- etc.
ng0tkul4 said:
if you can get hold of a NVRAM partition from others phone (not necessarily Q390 - at least same SoC: MT6582), then you can flash it to your phone.
BUT, your phone will have the same IMEI as the source phone. So if you and source phone would use the same SP (Service Provider or network), and IF this SP is strict about cloned IMEIs, they could block this IMEI. Leaving both phones unusable to this network. So if you can get hold of NVRAM partition from somebody living abroad (i.e. foreigner), the better.
if you are rooted, and terminal (adb shell) savvy, you can write it it via dd, i.e.:
$ dd if=/path/of/nvram of=/dev/nvram
or you can flash it via SPFT memory write ("Window" menu -> "Write Memory").
1) Select "Write Memory" tab (after it is shown)
2) Select "EMMC" for the memory setting
3) Select/browse ("Open Raw Data") the NVRAM image for the "File Path"
4) "Begin Address (Hex)" = 0x1800000
5) "Container Length (Hex)" = 0x500000
6) Click "Write Memory"
7) Connect your phone to PC (must be turned off as you may already know)
The NVRAM image could be named as nvram.bin or something else. But it must be a raw image of NVRAM partition (/dev/nvram) from other phone. TWRP can do a backup of this partition by selecting it when you are about to perform TWRP backup.
If you want to temporarily restore your IMEI, you can try MTKDroidTools or Mobile Uncle Tools (apk)
Click to expand...
Click to collapse
under NVRAM folder. It has nothing. Literally nothing inside the nvram folder.
phaw16 said:
under NVRAM folder. It has nothing. Literally nothing inside the nvram folder.
Click to expand...
Click to collapse
correct.
there's shouldn't be anything there...as it is not supposed to be a folder. for one, dd will not work in folder, so i really expect /dev/nvram to be not a folder, rather than a device file pointing to NVRAM partition (offset 0x1800000) of your Fuze's EMMC.
if you see /dev/nvram as a folder/directory (rather than a device file), then something's gone really wrong in your EMMC partitions.
Grawrz said:
Just bought a Fuze, and wondering if my unit is defective or it really has issues with the edges of the touch screen. Whenever I use Touchpal X, I have trouble pressing the "a" key. I need to press slightly between "a" and "s" to get it to register.
I have the same issue with some games, when tapping on the very edge of the screen wont register. I have show touches enabled, and it shows the white circle, but the game won't respond at all. Any ideas? I'm running rooted stock rom with gravity box. The only other module i'm using is root cloak for avabel online.
Anyone have similar problems?
EDIT: Found the cause. I had Pie Controls set to 15px so it was eating a lot of screen space for activation. I disabled Pie and it works fine now
Click to expand...
Click to collapse
Sir the multi touch for Fuze works well your device is not defective. You can't do multi touch if you press already on the left part for me it doesnt really makes sense why'd do that. Example you press arrow up button then you want to press A should you still use your right thumb well in fact the left thumb is already near it furthermore it doesnt affect when your playing games. Its just whenever your using the keyboard.
ng0tkul4 said:
correct.
there's shouldn't be anything there...as it is not supposed to be a folder. for one, dd will not work in folder, so i really expect /dev/nvram to be not a folder, rather than a device file pointing to NVRAM partition (offset 0x1800000) of your Fuze's EMMC.
if you see /dev/nvram as a folder/directory (rather than a device file), then something's gone really wrong in your EMMC partitions.
Click to expand...
Click to collapse
As I mentioned on my post. I factory formatted the partition. Well I sent back the device to Cherry Mobile so that they can repair it.I just have to wait for 1 month.
Sir, how can i install xposed installer properly? I'm getting bootlooped both in MIUI and LEWA rom. I really need this for greenify. Thank you in advance.
Sent from my Q390 using Tapatalk
This thread intends to be a general thread for all things about the NuVision Tablet. The aim is to help other users of this tablet to be able to root their device, get a temporary recovery and to unbrick their device. I will add the guides for the following posts below in time. This would not have been possible without help from @andrei_kr.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Technical Specifications:
Display: 8-inch IPS HD capacitive touchscreen
Resolution: 1280 x 800
Operating System: Android 4.4 Kit Kat
Processor: Intel® Atom Processor
Memory: 1GB DDR
Storage: 16GB
Micro SD Card Slot: Yes, expandable up to 64GB
Camera - Rear: 2MP
Camera - Front: 2MP
Audio: 3.5mm stereo jack with microphone
Wireless: Wi-Fi 802.11 b/g/n
Bluetooth: Bluetooth 4.0
Battery Type: Rechargeable lithium-ion
Battery Life: 6+ hours; results will vary based on usage and settings
Port: Micro USB
Sensor(s): Accelerometer
Backup/Root/Recovery
DISCLAIMER:
Rooting your phone and using custom Recoveries and ROM's have risks and may result in bricking your device, and has nothing to do with Google or the device manufacturers. In case of any mishap I am not responsible if you brick/ruin your phone in any way.
Basic computer skills are required and minimal knowledge about the phone and phone utilities also.
Make sure that whatever you do, you are doing it at your own responsibility.
How to backup of your stock ROM, install CWM and Root your device.
Requirements
ADB/Fastboot Drivers
Intel Android USB Drivers
SDcard (8GB of higher)
Temp recovery script
SuperSU
Steps
Download and unpack IntelAndroid-FBRL-07-24-2015.7z
Power off tab.
Hold Vol+ and press Power on the tab 5-10 seconds
You can see logo about 10 sec and after that DROIDBOOT will load
Connect USB cable to PC
Run launch.bat from IntelAndroid-FBRL-07-24-2015 folder
Type ACCEPT and press Enter
Type 5 and ENTER (cwm.zip)
Type T3 and ENTER (or T4)
CWM will load after 10 sec.
Select backup to external sd card.
After the backup is complete, copy it to the PC to ensure it's safe.
Follow steps 1-10 again and go to install zip from sdcard or external and select the SuperSU zip file and flash it.
NOTE: DO NOT FLASH ANY ROMS WITH THIS RECOVERY IT IS ONLY TEMPORARY. I DID NOT TEST XPOSED SO BE CAREFUL.
Credits
@andrei_kr
@social-design-concepts
@vampirefo
@Chainfire
Unbrick your Tab!
To unbrick your device all you simply have to do is go back to the CWM and restore your backup that you created earlier. If you don't have one, here is a copy of a working backup ---> Google Drive. Credits to @andrei_kr, say thanks!
How to fix touch!
If you unbricked your tablet and your touch isn't working, there is no need to worry. @andrei_kr has provided a guide on how to fix that touchscreen. Credits to him.
NOTE: If your touch is working then do not try this, it will mess up your touch!!
You probably got this touchscreen issue by flashing a different kernel with incorrect drivers.
Now your configuration is likely to differ from the native. You can view the konifig in command prompt or in the terminal :
Code:
cat /proc/gt9xx_config
(only mtk) or using the gtp_tools apk (it is in the attached file below).
It starts with the byte sequence: 0x41 0x1C 0x02 0xC0 0x03
0x41 - 65 version
0x1C 0x02 - 540 horizontal resolution
0xC0 0x03 - 960 vertical resolution
Touch must somehow work to press the button, if there is support otg, then it's easier, you can connect a mouse.
1. Install the gtp_tools_v2.6_20140126_special.apk
2. Go to the option Firmware update. Click refresh, see IC Version: 913_1020 then touch GT913 firmware and 1020.
3. Go to the option Config Settings, press read, the data were considered. Under Normal Config we have:
65 version
540 horizontal resolution
960 vertical resolution
4. Click browse, select click browse to the native config.
5. Native configuration take from your device, in the same paragraph, press the save (saves the backup config file). Native configuration for Fly IQ446 in the attached file. Press send.
6. If nothing has changed, look at the version you have and native config. Then change the version of the file in the native config in your hex.
Example: 0x41 = 65 home, a stranger 0x49 = 73 => replace the 0x41 to 0x49.
Xposed does work
Make sure you're rooted and have a working backup.
Download and install Xposed but don't run yet.
Version name:
2.6.1
Release type:
Stable (low risk of bugs)
Download:
de.robv.android.xposed.installer_v32_de4f0d.apk (711.77 KB)
Number of downloads:
11,141,690 in total · 8,610 in the last 24 hours
MD5 checksum:
de4f0dc569f96dbcc5668d40fa76040b
Uploaded on:
Tuesday, May 20, 2014 - 21:59
Changes:
- Fixed a crash with some apps (Disa, Rdio)
- Some minor UI improvements
- A few translation updates
Now either use an android terminal emulator or ADB and run these commands
1. su
2. echo 148 > /data/data/de.robv.android.xposed.installer/conf/jit_reset_offset
3. chmod 664 /data/data/de.robv.android.xposed.installer/conf/jit_reset_offset
Now you can install the Xposed framework.
max0r4axor said:
Xposed does work
Make sure you're rooted and have a working backup.
Download and install Xposed but don't run yet.
Version name:
2.6.1
Release type:
Stable (low risk of bugs)
Download:
de.robv.android.xposed.installer_v32_de4f0d.apk .
Click to expand...
Click to collapse
Thanks for report.
First want to say much thanks for this thread, it was getting frustrating trying to find a solution.
I have encountered a slight issue trying to unstuck 2 of these devices.
neither have been rooted and are stock devices.
i cant seem to get cwm to locate the backup that you supplied.
do i need to copy it to the cwm backup folder on my sd card?
Jingbadguy said:
First want to say much thanks for this thread, it was getting frustrating trying to find a solution.
I have encountered a slight issue trying to unstuck 2 of these devices.
neither have been rooted and are stock devices.
i cant seem to get cwm to locate the backup that you supplied.
do i need to copy it to the cwm backup folder on my sd card?
Click to expand...
Click to collapse
Yes you do. Copy it to your sd card. Btw if your device is stock why do you want to restore this one?
kirito9 said:
Yes you do. Copy it to your sd card. Btw if your device is stock why do you want to restore this one?
Click to expand...
Click to collapse
both are stuck in bootloader.
i was assuming i could just just reflash...
cant find a stock copy anywhere...
Jingbadguy said:
both are stuck in bootloader.
i was assuming i could just just reflash...
cant find a stock copy anywhere...
Click to expand...
Click to collapse
Oh I thought they were working. Follow the procedure above to fix.
NuVision TM101A510L
Will this method work with the NuVison TM101A510L. It seems like a lot of work to do if I'm not sure about this model. Also I have a problem with this model overheating and crashing when I play Pixel Gun 3d and it's pissing me off. I just fired off a curse filled missive to NuVision support. They don't even list this model on their registration page and it seems they have no faith in this model. I will never buy this brand again, in fact I would recommend against it to my customers. I've used Azpen tablets with no problem rooting or playing Pixel Gun 3d. I took a chance and I'm so damned sorry I did.
;angry
Thank you so much for this thread!!! I have been looking for a recovery for a few months now and cant believe I didn't find this until now...
ok so a minor problem... I cant seem to flash the recovery... Not sure if ive placed the recovery file on my sd card properly or not cause i locate a few backup files none of which have any effect. I gave up in frustration untill now. ( Currrently working on a few androids one rooting one imea changing so figured id take a crack at these devices again. THe layer of dust on these things are getting a bit thick.)
williamglick said:
Will this method work with the NuVison TM101A510L. It seems like a lot of work to do if I'm not sure about this model. Also I have a problem with this model overheating and crashing when I play Pixel Gun 3d and it's pissing me off. I just fired off a curse filled missive to NuVision support. They don't even list this model on their registration page and it seems they have no faith in this model. I will never buy this brand again, in fact I would recommend against it to my customers. I've used Azpen tablets with no problem rooting or playing Pixel Gun 3d. I took a chance and I'm so damned sorry I did.
;angry
Click to expand...
Click to collapse
I think the models numbers are specific so I can't say for certain that this will work with your tab. Try the fastboot/rooting procedure first and then maybe you can just restore the system partition only not corrupting the boot/kernel.
Unidave199 said:
Thank you so much for this thread!!! I have been looking for a recovery for a few months now and cant believe I didn't find this until now...
Click to expand...
Click to collapse
You're welcome. I waited months also before finding a working backup.
Jingbadguy said:
ok so a minor problem... I cant seem to flash the recovery... Not sure if ive placed the recovery file on my sd card properly or not cause i locate a few backup files none of which have any effect. I gave up in frustration untill now. ( Currrently working on a few androids one rooting one imea changing so figured id take a crack at these devices again. THe layer of dust on these things are getting a bit thick.)
Click to expand...
Click to collapse
You are using the fastboot method correct? If the recovery script says finished as in no errors show on the screen then it could be the device itself. What do you see?
kirito9 said:
You are using the fastboot method correct? If the recovery script says finished as in no errors show on the screen then it could be the device itself. What do you see?
Click to expand...
Click to collapse
ill let you know just as soon as i can get back to working on those devices... im prety sure if memory serves correctly, that I was getting some errors regarding unable to mound sd or ext sd. I could be wrong but thats what comes to mind.
Im up to my neck in jobs on other devices. (rooting galaxy S5, changing imei on another S5, IMEI change on a LG Stylo 2 plus, Galaxy Tab 2 system issues need to diagnose, and several screen and lcd replacments)
STUCK
ok so i have a little time to work on these....
When i run the launch.bat and get to fastboot, it goes through the instalation and everything checks ok till the very end where it says failed cause too many links.
included the screenshot so you can see.
At this point im unsure if i just need to try flashing the supersu zip like it instructs but having tried befor it had no luck.
can I not just flash twrp on this thing then su like with most root methods?
after ive flashed super su, when i go to restor the working backup i see a list of backups... including yours but when i select it i always get :
checking md5 sums...
md5 mismatch!
what now?
(i tried just flashing the boot but even that comes back with same error)
I know on other devices the recovery is an img file any the one you provide is a rar... i extracted to my desktop and was gonna try flashing with abd/fastboot but since its not an img file, im thinking it wont work...
any thoughts?
Im still unsure how to flash the recovery that u supply in the section for fixing bootloop....
Jingbadguy said:
ok so i have a little time to work on these....
When i run the launch.bat and get to fastboot, it goes through the instalation and everything checks ok till the very end where it says failed cause too many links.
included the screenshot so you can see.
At this point im unsure if i just need to try flashing the supersu zip like it instructs but having tried befor it had no luck.
can I not just flash twrp on this thing then su like with most root methods?
Click to expand...
Click to collapse
The too many links error is common for this device. Touch doesn't work with TWRP on this device so CWM is out only go. You can root and using cwm like any other root method.