Hi , i just hard bricked my atrix 2 , while doing the downgrade ICS to Ginger....
the phone doesn't power on .. only a white led keeps on...
anyone can help me to find a solution??.... :crying::crying::crying:
This is why downgrading to ginger is not advisable..
Sent from my ME865 using Tapatalk now Free
Zyst said:
Hi , i just hard bricked my atrix 2 , while doing the downgrade ICS to Ginger....
the phone doesn't power on .. only a white led keeps on...
anyone can help me to find a solution??.... :crying::crying::crying:
Click to expand...
Click to collapse
What was the need dude ? Its hard brick but u may try with diff battery :good:
8(
Tushcool said:
What was the need dude ? Its hard brick but u may try with diff battery :good:
Click to expand...
Click to collapse
i wanted to go back to ginger for solve some Hdmi audio issues... but during the RSD flash, the phone just rebooted and don't get back...
i already try to recharge the battery with a wall charger ..and use the MACgyver method... but no results
Zyst said:
i wanted to go back to ginger for solve some Hdmi audio issues... but during the RSD flash, the phone just rebooted and don't get back...
i already try to recharge the battery with a wall charger ..and use the MACgyver method... but no results
Click to expand...
Click to collapse
I read somewhere in atrix 2 forum , One of the user had same problem. White led ....but when he took cell to motoservice centre they said battery was dead n they changed it.. he also charged battery with wall charger but no solution. I suggest you to take it to the service centre .
Zyst said:
i wanted to go back to ginger for solve some Hdmi audio issues... but during the RSD flash, the phone just rebooted and don't get back...
i already try to recharge the battery with a wall charger ..and use the MACgyver method... but no results
Click to expand...
Click to collapse
Sorry. You're hard bricked. There is no fixing that. Your only option is to get it replaced if it is still under warranty. If you don't have a warranty, it is now an expensive lesson on why we always say read, read, read, read.....
If I had a dollar for every time I said that, I'd be making money in a very weird way.
My deepest condolences.. :'(
Sent from my ME865 using Tapatalk now Free
1BadWolf said:
Sorry. You're hard bricked. There is no fixing that. Your only option is to get it replaced if it is still under warranty. If you don't have a warranty, it is now an expensive lesson on why we always say read, read, read, read.....
If I had a dollar for every time I said that, I'd be making money in a very weird way.
Click to expand...
Click to collapse
No one ever does !!!!
Related
Hi there..
I have JasJam, and it was ok until I removed the battery one day for some reasons, when I put back the battery the mobile was dead!!
when I try to charge it.. it shows red light instead of green!
I tried to follow some web-solutions so I removed the battery while the AC was plugged in, the red light then start flashing! I put the battery again but with no result! the red light is back.
I tried to hard-reset it, but even this was not working, it's not accepting the hard-reset!!
please help
nobody is there for help !!
I want to add something, I'm sure that battery is ok because i tried to use it in another device and it was ok.
alaziz said:
nobody is there for help !!
I want to add something, I'm sure that battery is ok because i tried to use it in another device and it was ok.
Click to expand...
Click to collapse
Hey there, im afraid it doesnt look good my freind. Are you still using stock rom or a cooked one?
Assume you cant even enter bootloader if hard reset doesnt work?
timmymarsh said:
Hey there, im afraid it doesnt look good my freind. Are you still using stock rom or a cooked one?
Assume you cant even enter bootloader if hard reset doesnt work?
Click to expand...
Click to collapse
Thanks for your reply.
that's right, I can't enter bootloader..
actually, my Jasjam fall in water before three days, but i dry it and it works normally for two days after!
then when I removed the battery and put it back the problem started!
is it possible that it's some kind of shortage ?
alaziz said:
Thanks for your reply.
that's right, I can't enter bootloader..
actually, my Jasjam fall in water before three days, but i dry it and it works normally for two days after!
then when I removed the battery and put it back the problem started!
is it possible that it's some kind of shortage ?
Click to expand...
Click to collapse
Id say it is a strong possibily yeah lol, pity you hadnt said that before
Id say your only option is to take it in to a service shop, although its probably cheaper to get a different machine im afraid!
The USB cable pop out when I'm update on Kies. Now my phone totally dead. I can't turn on, can't do anything. I tried so many many way in forum, but the screen still black, nothing happen. What can I do now? need some serious advice from pros. Thanks a lot.
Try this:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_4G#Download_Mode
Then flash the sms kj6 heimdall one click rom
alvinvnguyen said:
The USB cable pop out when I'm update on Kies. Now my phone totally dead. I can't turn on, can't do anything. I tried so many many way in forum, but the screen still black, nothing happen. What can I do now? need some serious advice from pros. Thanks a lot.
Click to expand...
Click to collapse
Do what FB says, sometimes download mode stays on black screen as long as the computer recognizes ur good.
alvinvnguyen said:
The USB cable pop out when I'm update on Kies. Now my phone totally dead. I can't turn on, can't do anything. I tried so many many way in forum, but the screen still black, nothing happen. What can I do now? need some serious advice from pros. Thanks a lot.
Click to expand...
Click to collapse
Lol this happened the first odin flash i ever did... My dog jumped in my lap and stepped on the cord and it came unplugged. Phone was softbricked for 2 days... I thought i killed it lol.
Sent from my SGH-T959V using Tapatalk
Thanks for reply me. I understand what u guy said. But the point is my phone totally black. Can't connect to PC, can't use the 3 buttons combo. only can charge the battery. That's it. Have u guy seen that before? Is it can be fix by regular way or I have to send the phone to Mobile Shop?
Aww crap dude, i know your pain, i hard bricked my first sgs4g two days after i got it. Go to a t-mobile store or call them and ask for a replacement ask for a NEW phone, the refurbished ones are crap. Before you send it to tmobile, reformat the phones sd card so they cant see you did anything.(rooted it or whatever) If you used kies for an offical update you dont have to lie, i had to since i used odin.
You could also send to a guy who owns a riff jtag box, do a google search for that.
Sent from my SGH-T959V using xda premium
If you can charge the battery it is not dead or hard bricked.
Bassmanjames said:
If you can charge the battery it is not dead or hard bricked.
Click to expand...
Click to collapse
He's right. If your charging you can recover it. It's happened to me and I recovered. Click the link FB posted to the wiki.
Also, if you try download mode and you see a black screen, look for any white pixels. That is an issue with SBL, where after a bad flash, it will be in download mode, but it will show nothing or some pixelated garbage. If you see any light coming from the screen ( check in a dark room or closet, then your fine, just attempt ODIN or Heimdall. Not Kies
Removed
Sent from my HTC Vision using XDA App
Anybody......please help me to my problems. I can't open (power on) or enter to recovery mode or downloading mode. I can't do anything to my device. Before happening things to my device, I left my device for 2 days without using it. I think it lack of battery power or something.
Now, can't do anything to it. My device is in ICS 4.0.4 Austria firmware and also rooted.
Please how can i cure my device?:crying:
Thanks all who read this in advance.
I had the same problem, I took it to servicing... they said the PCB(phone circuit board) was fried... got it replaced and its fine now....
Anyway, if anybody could fix it...I would be happy to learn the skill to do it myself....
Sent from my LG-P500 using xda premium
lenhkp said:
I had the same problem, I took it to servicing... they said the PCB(phone circuit board) was fried... got it replaced and its fine now....
Anyway, if anybody could fix it...I would be happy to learn the skill to do it myself....
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Ahrrr...... Exchanging PCB??? It might be expensive. But I didn't do anything to brick hardware. :'(
Could you please tell me how much it is cost to exchange PCB?
Well I got it for free... that time my phone was still under warranty, and it was just dead,and I knew there was no way they(servicing people) would know about my rooted phone, so its dirty but I told them it just died, and got it replaced for free...lol... so I don't really know the cost...lol
If ur phone is still under warranty,maybe you could use the same technique ...
ICS stock recovery hv problem, many people have become bootloop / hardbricks after wipe using stock/temporary recovery. If u want to flash official ICS, u need to flash CWR to.
Hardbricks mean your main board dead and need to replace the new board.
For more details, refer to this link.
http://forum.xda-developers.com/showthread.php?p=29077817
Sent from my GT-P6200 using xda premium
kyawswaraung said:
Anybody......please help me to my problems. I can't open (power on) or enter to recovery mode or downloading mode. I can't do anything to my device. Before happening things to my device, I left my device for 2 days without using it. I think it lack of battery power or something.
Now, can't do anything to it. My device is in ICS 4.0.4 Austria firmware and also rooted.
Please how can i cure my device?:crying:
Thanks all who read this in advance.
Click to expand...
Click to collapse
One question please: If you connect the tablet to AC power for some time (at least ten minutes) appears then the green battery charging icon ? Or nothing ...
Edit : it's possible that the tablet goes to a deep discharge condition, very dangerous for Li-ion batteries...
losteagle said:
One question please: If you connect the tablet to AC power for some time (at least ten minutes) appears then the green battery charging icon ? Or nothing ...
Edit : it's possible that the tablet goes to a deep discharge condition, very dangerous for Li-ion batteries...
Click to expand...
Click to collapse
Not at all. Nothing appear from display. So sad. And here Myanmar Country, no warranty at all even Samsung provide warranty. Thanks to all.
kyawswaraung said:
Not at all. Nothing appear from display. So sad. And here Myanmar Country, no warranty at all even Samsung provide warranty. Thanks to all.
Click to expand...
Click to collapse
Note to self... Don't move to Myanmar..
Sent from my myTouch 4g via Tapatalk
Phone won't power on an I have stuff on the sdcard that I need off is there a way to get it off
Have you tried charging it?
ThinksAmoral said:
Have you tried charging it?
Click to expand...
Click to collapse
Umm yes. What kind of ? is that
try taking the battery out, let it sit a few mins, put it back in, reboot. hope that works. also what was the last thing(s) you did to your phone?
Sent from my Nexus S using xda premium
[email protected] said:
try taking the battery out, let it sit a few mins, put it back in, reboot. hope that works. also what was the last thing(s) you did to your phone?
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
Tried taking battery out an letting it sit still a no go I took it into sprint an they didn't find It's not coming on...I'm trying to see if there is a way to get to the stuff on the sdcard really need/want some of the stuff on there
donbudafuko said:
Tried taking battery out an letting it sit still a no go I took it into sprint an they didn't find It's not coming on...I'm trying to see if there is a way to get to the stuff on the sdcard really need/want some of the stuff on there
Click to expand...
Click to collapse
What are the last things you did before the phone doesn't boot anymore?? Was it falling down into water or was it a unsuccessful flash of a new ROM? Or did you pull out the battery while it was booting? If it isn't any hardware fault like corrosion or damaged motherboard you could fix your boot problem in a repair centre with a JTAG devices. They can flash a new bootloader and rom so boot up your phone and could access your SD card. If the motherboard is broken.. sry dude. Maybe a professional data rescue centre could extract the flash drive chip from the motherboard and read it but that would be very expensive...
Sent from my Nexus S using xda premium
bronko15344 said:
What are the last things you did before the phone doesn't boot anymore?? Was it falling down into water or was it a unsuccessful flash of a new ROM? Or did you pull out the battery while it was booting? If it isn't any hardware fault like corrosion or damaged motherboard you could fix your boot problem in a repair centre with a JTAG devices. They can flash a new bootloader and rom so boot up your phone and could access your SD card. If the motherboard is broken.. sry dude. Maybe a professional data rescue centre could extract the flash drive chip from the motherboard and read it but that would be very expensive...
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
an thats the weird thing i was at work just got off sat down text my girl an sat the phone on the table wen tan talked to my coworker an went back to check the phone an it wouldnt turn on. let it sit tryed again then took the battery out an everything would not come on its just weird had atless 50%+ on it. iv hooked it up to a pc an still nothing.
I was surfing the forums here and seen this and thought I would post it as it might help with some soft bricks, when fastboot is not wanting to work.
http://forum.xda-developers.com/showthread.php?t=2198223
I take no responsibility if you try that and it damages your device.
alldoom65 said:
I was surfing the forums here and seen this and thought I would post it as it might help with some hard bricks
http://forum.xda-developers.com/showthread.php?t=2198223
I take no responsibility if you try that and it damages your device, but if it is hard bricked it is not like you have much to lose.
Click to expand...
Click to collapse
That's a solution for a soft brick, not a hard brick.There's a reason why it's called hard brick dude, you can't recover from it unless you're tony stark and are able to patch the blown e-fuses
Sent from my MB865 using xda premium
Yeah after taking a closer look that does look more like a softbrick fix not a hardbrick fix.
Sorry everyone that was my bad, I asked alldoom65 to post this thinking it would help someone out of a hard brick, but I did not read close enough to see that the guy was stuck on M logo.... so everyone can slap me, not alldoom65.
Hey alldoom65, maybe change the title to indicate that this post is an alternate way out of a softbrick, when rsd does not see the phone, and you do not have the scripts. Not a hardbrick fix. you can edit the title in the go advanced button in the edit screen, I think.
Again sorry everyone, especially to you alldoom65.
jimbridgman said:
Yeah after taking a closer look that does look more like a softbrick fix not a hardbrick fix.
Sorry everyone that was my bad, I asked alldoom65 to post this thinking it would help someone out of a hard brick, but I did not read close enough to see that the guy was stuck on M logo.... so everyone can slap me, not alldoom65.
Hey alldoom65, maybe change the title to indicate that this post is an alternate way out of a softbrick, when rsd does not see the phone, and you do not have the scripts. Not a hardbrick fix. you can edit the title in the go advanced button in the edit screen, I think.
Again sorry everyone, especially to you alldoom65.
Click to expand...
Click to collapse
Jim!!!So it's true then.You never left the A2 forum.You're just taking a vacation and when that ends you're planning on making an epic comeback right???
Please say yes
And rest assured you're the last person anyone on this forum would wanna slap.
May the -Mass times Acceleration- be with you...
deveshmanish said:
Jim!!!So it's true then.You never left the A2 forum.You're just taking a vacation and when that ends you're planning on making an epic comeback right???
Please say yes
And rest assured you're the last person anyone on this forum would wanna slap.
May the -Mass times Acceleration- be with you...
Click to expand...
Click to collapse
I never fully left, just been taking a back seat.
I am working on buying an engineering version of the atrix2 with an unlocked bootloader, so... We'll see.. I might be back with a vengeance, soon.
P.S. I love your signature
jimbridgman said:
I never fully left, just been taking a back seat.
I am working on buying an engineering version of the atrix2 with an unlocked bootloader, so... We'll see.. I might be back with a vengeance, soon.
P.S. I love your signature
Click to expand...
Click to collapse
Lol thanks and here I thought no one would understand.
May the -Mass times Acceleration- be with you.
So my A2 seems really dead for some reason. I had system 1 in BMM as Stock ICS rooted. System 2 blank and 3 PAC milestone RC1. Flashed a 4.3 font on system 1 accidentally and lost BMM. Had a day to get to a computer and try the windows.batch cuz not enough time for FXZ. No avail. Rebooted a couple times and now its a blank. Won't get into fast boot barely unless I have it plugged in while volume up n down while stuck on M. Plugged into PC I get the white led. But wall AC only brings me to M. Not battery charging. I don't get it. It can't be bricked. Can battery be done for? Wtf happened? I'm currently trying to get a Motorola branded USB wall AC charger to see if I can get it to at least charge to 5% and give the windows.batch a go again...
Sent from my ADR6350 using xda app-developers app
A2Trip said:
So my A2 seems really dead for some reason. I had system 1 in BMM as Stock ICS rooted. System 2 blank and 3 PAC milestone RC1. Flashed a 4.3 font on system 1 accidentally and lost BMM. Had a day to get to a computer and try the windows.batch cuz not enough time for FXZ. No avail. Rebooted a couple times and now its a blank. Won't get into fast boot barely unless I have it plugged in while volume up n down while stuck on M. Plugged into PC I get the white led. But wall AC only brings me to M. Not battery charging. I don't get it. It can't be bricked. Can battery be done for? Wtf happened? I'm currently trying to get a Motorola branded USB wall AC charger to see if I can get it to at least charge to 5% and give the windows.batch a go again...
Sent from my ADR6350 using xda app-developers app
Click to expand...
Click to collapse
Yup has happened to me before(I think).It's a soft brick.Get more juice in your battery and then fxz back or use the windows patch.You should be just fine..
Good luck..
deveshmanish said:
Yup has happened to me before(I think).It's a soft brick.Get more juice in your battery and then fxz back or use the windows patch.You should be just fine..
Good luck..
Click to expand...
Click to collapse
That's happened to me too. Had to use the macguyver battery charge method to get it back going again.
Brought to you by time and relative dimensions in space.
1BadWolf said:
That's happened to me too. Had to use the macguyver battery charge method to get it back going again.
Brought to you by time and relative dimensions in space.
Click to expand...
Click to collapse
LIKE A BOSS! It's up and running! Thanks for the info dude...I did sum crazy surgery and took a huge gamble doing this but it worked like a lucky charm! AWESOME! Letting it charge cuz after the FXZ It's at 0%! Crazy! Letting it get to 100 before I even try rooting it. So glad I got my laptop back today too!!!
This is what the cord looked like after cutting and seperating/taping. I'm keeping this thing just in case I ever need it again! lol!
Sent from my MB865 using xda premium