Good afternoon guys, sorry if i have a bad english i will try to do my best
i need help with my htc one x from at&t, i get it last friday and root it, then i unlocked the bootloader but when i try to install a custom rom(Clean ROM) something went wrong, i tried to restore my back up copy but accidentally wiped it while triying to wipe de other stuff.
Now im stuck in the TWRP recovery and the bootloader, PC doesn't detect the device as a usb storage, i also tried to flash another rom using adb push and adb sideload, maybe i made a mistake or something, i hope you can help me.
Also i want to know wich are the correct drivers for Windows to detect properly the phone as a mount usb on TWRP.
Thanks
What happens when you mount usb storage through the TWRP menu?
Sent from my Evita
Nothing shows up on my computer or any of the others I've tried it with today. And I've swapped over USB cables to make sure it wasn't that.
I'm assuming it's either some deep low level issue with USB connectivity or a hardware problem on my phone like a bent pin.
TKTAB911 said:
Nothing shows up on my computer or any of the others I've tried it with today. And I've swapped over USB cables to make sure it wasn't that.
I'm assuming it's either some deep low level issue with USB connectivity or a hardware problem on my phone like a bent pin.
Click to expand...
Click to collapse
Never mind, I modded it and this is no longer a concern;
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
Hi,
this morning I flashed froyo JPK onto my phone and everything was working great until I downloaded a file through dropbox and suddenly my screen went black. I had to take out the battery to restart the phone and then it got stuck in an endless loop of blinking start up logo.
When trying to get into recovery mode I get the message it can't mound /dev/block/mmcblk0p1. I have tried several things I found here on the forums, including going back to stock UGJH2 but still the same.
Any suggestions on what to do? Do I have to send it in? The problem is I bought this phone through ebay as I am living in Australia so not sure if my local Samsung will be of any help.
Thanks,
b3n
I think I really screwed something. On another forum someone suggested to use the JM5 ROM and so I did. Now I can't even get my phone into download/recovery mode anymore. Any help on this or do I have to get it fixed in a service centre?
I have the same problem.... I'm stumped! My phone goes through the Galaxy logo then goes black with the two buttons lit up. Stuck.
Ugh.
same problem, so far nothing is working
anyone found anything out as of yet?
when my phone was unable to enter download or recovery mode i was forced to make a jig.
it's 301Kohm of resistance soldered to pin 4 and 5 of a micro usb plug that you rip off a cable. works everytime. here i have 2x150Kohm + 1x1Kohm
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
the red pins are the pins you need to solder to the resistors.
Code:
* * [COLOR="Red"]*[/COLOR]
* [COLOR="red"]*[/COLOR]
My One S (S4 tmob.de, s-on, no root, latest firmware) all of sudden stopped reading my pendrive. It says it is damaged. Pendrive works fine, no problems, i ran chkdsk on it, reformatted it a few times(FAT32, 16gb pendrive). Other pendrives work, but this one wont anymore.
Any ideas?
Vladokapuh said:
My One S (S4 tmob.de, s-on, no root, latest firmware) all of sudden stopped reading my pendrive. It says it is damaged. Pendrive works fine, no problems, i ran chkdsk on it, reformatted it a few times(FAT32, 16gb pendrive). Other pendrives work, but this one wont anymore.
Any ideas?
Click to expand...
Click to collapse
what do you mean by pendrive?
Rantrave07 said:
what do you mean by pendrive?
Click to expand...
Click to collapse
I think he is talking about the micro usb drives
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Normal USB 2.0 Flash Drive connected to my phone through USB OTG cable. I dont know why i didnt mention that..
OK, i finally found someone with USB HOST, and his phone gave option to reformat my pendrive, and now it works. (my phone didnt give me option to reformat..)
I am quite confused, cause it got formatted into FAT32, which it arleady was... but whatever, IT WORKS!
Hello my XDA Developers I hope that you can help me with my phone, last week I bought a Droid Ultra fromo Ebay, and I received the phone but I think that it was a demo phone with a demo software from the store because the phone can not charge more than the 40%, and the app "VZW Demo"" is opened again and again doesnt matter how much I uninstall the app, I restore the phone from settings and doesnt work, I been tried to root the phone for flashing a ROOM but I cant, I been tried to return to stock the phone form this post http://forum.xda-developers.com/showthread.php?t=2580060 but im having troubles with the ADB and rebooting to the bootloader, seems like my pc doesnt recognize the phone (see images), and yes I have the USB debug enable, but with other phones my pc can recognize, the only way that my computer can recognize the droid ultra its from de recovery but from there I can not reboot to the bootloader, I downloaded the properly drivers and still nothing, I hope you guys cand help me, you are my last chance, sorry for my english its not the best im not from this country
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
will the phone boot into fastboot? with the phone off, vol down + pwr ?
I used method 2 manual flashing from the thread you linked to. It was not a developer phone, and the commands said they all failed, but the phone still returned to stock.
teerout said:
will the phone boot into fastboot? with the phone off, vol down + pwr ?
I used method 2 manual flashing from the thread you linked to. It was not a developer phone, and the commands said they all failed, but the phone still returned to stock.
Click to expand...
Click to collapse
I will try and I will say you if that works for me!
The phone fell and now when I turn it on I get a black screen with the header titled 'Boot Loader Logs' with the following message.
Your device didn't start up successfully. Use the Software Assist on Computer to repair your device. Connect your device to the computer to get the Software Assist.
Funny thing is when I do plug it into the computer -- nothing happens.
The phone it self recognizes the usb is plugged in and nothing more.
No boot-able A/B slot -- don't know what that means. Basically, is there anyway i could get this up and going without removing everything on the device ?
Mnd you im a noob to all of this so please take it easy.
I'm open to everything.
Good morning, I just had that problem since yesterday, I think a general formatting was done, even to the cell phone imei, I don't know if I can pick it up, I need help please, pdt: I don't know how to write so much in English, I speak Spanish
jhosuach said:
Good morning, I just had that problem since yesterday, I think a general formatting was done, even to the cell phone imei, I don't know if I can pick it up, I need help please, pdt: I don't know how to write so much in English, I speak Spanish
Click to expand...
Click to collapse
I investigated more, I realized that there is only slot a, b does not recognize, but at the moment of completely formatting with the data, it does not start
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please help with how to unbrick MXQ-EP-2-V1.0.
Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is it softbricked or hardbricked?
xXx yYy said:
Is it softbricked or hardbricked?
Click to expand...
Click to collapse
Not sure of the difference the two, maybe you can explain but there is no lights
Geek17 said:
Not sure of the difference the two, maybe you can explain but there is no lights
Click to expand...
Click to collapse
Want to bridge using paper clip
Hardbricked means a hardware component got defective, softbricked means either Android OS or device's bootloader got corrupted.
xXx yYy said:
Hardbricked means a hardware component got defective, softbricked means either Android OS or device's bootloader got corrupted.
Click to expand...
Click to collapse
Ok thanks I understand now. So with device if I press the reset switch within the av port and connect USB cable nothing happens. Software doesn't detect any bootloader.
Hi, if still works, you must to short circuit the point that show you in the picture, the board go to maskrom mode. (the secuence must be, press an hold reset button, keep and hold the shortcircuit and connecto the usb male to male on to computer), i use RKdevtool for install RK322XMiniLoaderAll_V2.32.bin and reboot. Now is in LOADER mode, so you can flash a firmware normally. Any doubts just send it.
My BOARD.
MXQ-EP-2-V1.0
RK3228A
8GB/128GB
WIFI SV6152P