Hi,
this morning I flashed froyo JPK onto my phone and everything was working great until I downloaded a file through dropbox and suddenly my screen went black. I had to take out the battery to restart the phone and then it got stuck in an endless loop of blinking start up logo.
When trying to get into recovery mode I get the message it can't mound /dev/block/mmcblk0p1. I have tried several things I found here on the forums, including going back to stock UGJH2 but still the same.
Any suggestions on what to do? Do I have to send it in? The problem is I bought this phone through ebay as I am living in Australia so not sure if my local Samsung will be of any help.
Thanks,
b3n
I think I really screwed something. On another forum someone suggested to use the JM5 ROM and so I did. Now I can't even get my phone into download/recovery mode anymore. Any help on this or do I have to get it fixed in a service centre?
I have the same problem.... I'm stumped! My phone goes through the Galaxy logo then goes black with the two buttons lit up. Stuck.
Ugh.
same problem, so far nothing is working
anyone found anything out as of yet?
when my phone was unable to enter download or recovery mode i was forced to make a jig.
it's 301Kohm of resistance soldered to pin 4 and 5 of a micro usb plug that you rip off a cable. works everytime. here i have 2x150Kohm + 1x1Kohm
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
the red pins are the pins you need to solder to the resistors.
Code:
* * [COLOR="Red"]*[/COLOR]
* [COLOR="red"]*[/COLOR]
Related
Good afternoon guys, sorry if i have a bad english i will try to do my best
i need help with my htc one x from at&t, i get it last friday and root it, then i unlocked the bootloader but when i try to install a custom rom(Clean ROM) something went wrong, i tried to restore my back up copy but accidentally wiped it while triying to wipe de other stuff.
Now im stuck in the TWRP recovery and the bootloader, PC doesn't detect the device as a usb storage, i also tried to flash another rom using adb push and adb sideload, maybe i made a mistake or something, i hope you can help me.
Also i want to know wich are the correct drivers for Windows to detect properly the phone as a mount usb on TWRP.
Thanks
What happens when you mount usb storage through the TWRP menu?
Sent from my Evita
Nothing shows up on my computer or any of the others I've tried it with today. And I've swapped over USB cables to make sure it wasn't that.
I'm assuming it's either some deep low level issue with USB connectivity or a hardware problem on my phone like a bent pin.
TKTAB911 said:
Nothing shows up on my computer or any of the others I've tried it with today. And I've swapped over USB cables to make sure it wasn't that.
I'm assuming it's either some deep low level issue with USB connectivity or a hardware problem on my phone like a bent pin.
Click to expand...
Click to collapse
Never mind, I modded it and this is no longer a concern;
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello my XDA Developers I hope that you can help me with my phone, last week I bought a Droid Ultra fromo Ebay, and I received the phone but I think that it was a demo phone with a demo software from the store because the phone can not charge more than the 40%, and the app "VZW Demo"" is opened again and again doesnt matter how much I uninstall the app, I restore the phone from settings and doesnt work, I been tried to root the phone for flashing a ROOM but I cant, I been tried to return to stock the phone form this post http://forum.xda-developers.com/showthread.php?t=2580060 but im having troubles with the ADB and rebooting to the bootloader, seems like my pc doesnt recognize the phone (see images), and yes I have the USB debug enable, but with other phones my pc can recognize, the only way that my computer can recognize the droid ultra its from de recovery but from there I can not reboot to the bootloader, I downloaded the properly drivers and still nothing, I hope you guys cand help me, you are my last chance, sorry for my english its not the best im not from this country
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
will the phone boot into fastboot? with the phone off, vol down + pwr ?
I used method 2 manual flashing from the thread you linked to. It was not a developer phone, and the commands said they all failed, but the phone still returned to stock.
teerout said:
will the phone boot into fastboot? with the phone off, vol down + pwr ?
I used method 2 manual flashing from the thread you linked to. It was not a developer phone, and the commands said they all failed, but the phone still returned to stock.
Click to expand...
Click to collapse
I will try and I will say you if that works for me!
hello my friends, directly to the point, i messed up the rpm partition (not the table itself, just that partition), because of that the phone
wont turn on, and when connected to the pc i can get it to work on 2 modes
1: pressing both vol buttons + power makes the pc recognize these 3 devices:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2: pressing nothing
i already tried many things, getting into sec bootloader (goes to the first screenshot),qpst and boarddiag (says it cannot find phone in dl mode, even tho i selected the right com port),lgnpst (3 versions, lg flash tool dosent detect it, lgnpst detects but dosent do anything, lg kdz update dosent detect), tried the g2 method (but no,it wont mount all partitions in linux).since here its brazil my only hope so far its LG repair center,however they take up to a month to fix . any hope for me?some method that i didnt see? thanks in advance
Your bricked. Search for threads started by @bitdomo. He just might be able to help you. I'll try and post the link if I can find it.
EDIT: Here's the link. http://forum.xda-developers.com/google-nexus-5/help/nexus-5-stucked-qualcomm-hs-usb-t2935283 Get a hold of him. I can assure you the guy knows his stuff. Good luck.
theesotericone said:
Your bricked. Search for threads started by @bitdomo. He just might be able to help you. I'll try and post the link if I can find it.
EDIT: Here's the link. http://forum.xda-developers.com/google-nexus-5/help/nexus-5-stucked-qualcomm-hs-usb-t2935283 Get a hold of him. I can assure you the guy knows his stuff. Good luck.
Click to expand...
Click to collapse
ohh thanks, will contact him for sure!
Hi,
I recently purchased a replacement USB port part for my Nexus 5, as my original one had a bad connection on the port which made charging very tricky.
The new part.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I followed a Youtube guide here: https://www.youtube.com/watch?v=qqCEXEmcj4Y
I did as was instructed, the only thing being an issue was that fitting the ribbon back into this port was a little tricky. (see the circled image below).
Put the phone back together. Powering on I feel the phone vibrate as if its powering on, but there isnt anything on the screen.
I hold the power button down to turn it off, but I dont get any vibration indicating it has force powered off.
Ive opened it all up and checked the work ive done, but still the same issue.
I thought it may be the new part I put in, so I swapped it for the old one.
Im concerned now that the port that i had to fiddle with to connect may of been damaged (although i was very careful). Or is there a more simple explanation where I need to connect it to a computer in an attempt to bring it back to life?
FYI I have just tried the vol keys and i can hear the vol change sounds. I may take the opportunity to back things up now.
Is it possible to do a factory reset without seeing the screen? I have a lock pattern that I obviously cannot see now either.
All help appreciated.
Thanks
Hi people, I have a Galaxy Note 10.1 (N8000), and since a few years ago is stored because from one day to another stopped working, when you turn on normally the screen is something like interference, has no movement, there is no sound of the system, just stays like that and occasionally restarts, but if Odin mode works "normally", I tried to flash the system in several ways and following various tutorials but nothing has worked yet. At some point it was taken to a "technician" to be checked, but the answer he gave was that the whole motherboard had to be replaced.
Does anyone know if this has a solution?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
JPFeliciano said:
Does anyone know if this has a solution?
Click to expand...
Click to collapse
The eMMC needs to be replaced, I'm doing this as a professional, don't know if theres a store which can do this in your country.
Open the tab and see if the flex cable from the screen is still properly seated in the connector. If not, open the lock and reinsert the flex cable from the screen correctly and close the lock again.
uwe.stemke said:
Open the tab and see if the flex cable from the screen is still properly seated in the connector. If not, open the lock and reinsert the flex cable from the screen correctly and close the lock again.
Click to expand...
Click to collapse
You can see, that the download mode looks normal.
It's the typical picture, if theres no data readable from the param partition,
mostly defective eMMC.