So I had the Sony Smartwatch that is available on their US website right now and then realized the Sony SmartWatch 2 was available on Amazon so I returned the one I got from Sony and bought the SmartWatch 2. I really really like it, as I have had a Pebble (returned it because I thought the screen was garbage) so I am very happy with this watch.
I just have two questions I am hoping someone with the watch can answer. First the watch face is always showing correct? On the first one you had to double tap (which hardly worked) to show the time. I just want to make sure that the watch face is always supposed to be showing?
Second if you look at the manual there is a light sensor towards the top left of the watch but I am confused as to what it is for. As there is no Auto Brightness what would the light sensor be for and how can I tell if it is working correctly?
Funny because Sony customer service could not give me a straight answer on these questions. Thank you for anyone that could help!!!
the watch face (time) is always showing, but normally without backlight
the backlight comes on when you press the button, press it again to go into the apps list
don't know about the light sensor, sorry
I believe that the light sensor is used to tell when the watch is in high light leves, so it can turn off the backlight, and go into "high light level" mode (which goes B&W I believe) to make the watch readable in the sun.
Awesome thanks for the replys guys....how you guys liking the watch....I am really impressed.....just wish there was more clock faces in the play store.
The clock will disappear if the watch is left on a desk without movement for 5 mins. As soon as you move it, it will re-appear.
ardsar said:
The clock will disappear if the watch is left on a desk without movement for 5 mins. As soon as you move it, it will re-appear.
Click to expand...
Click to collapse
Yes, so clearly there is a motion sensor in the watch as well like the smartwatch 1 had. I haven't managed to get any "effect" from the light sensor even in full sunlight, so I am not sure if they are utilizing that feature yet.
ardsar said:
The clock will disappear if the watch is left on a desk without movement for 5 mins. As soon as you move it, it will re-appear.
Click to expand...
Click to collapse
I am going to try that 5 min thing now....and i also see no difference with the light sensor...maybe in a future update....i get crazy with my electronics lol i like to know everything is working correctly....but it sounds like evryone is acting just as mine....
EDIT....So i have it sitting on my desk for about the last 10 or so minutes and the display has not gone out.....does everyones do that?
Edit of the Edit.....so the disply did go out but it took about 15 mins...maybe there was a slight movement that made it take longer....
Any other tips or tricks you guys have discovered? Really loving the watch...any cool apps u find?
Related
Hey people
Got my smart watch about 4 days ago and it was all good until tonight and now for some reason i can't see the clock anymore unless i press the power button :S i could have sworn it had a low light mode and the clock was visable ok but since tonight i can't see the time unless there's a light pointing straight at the watch. I hooked it upto the service centre thing and updated it through that but hasn't helped.
am I going mad here and just seeing things? :S
EDIT: i also noticed when i turn it off i get some weird colours appearing in the clockface some pinks/purples. i don't understand it was ok a couple of hours ago and it's been on my wrist the whole time :S
Did you try to reset the watch? Also our you have any custom clocks installed, remove them. As after reset, Sony smartwatch app will reinstall them on the watch, once the watch and the phone are connected.
On your watch, go to settings and tap reset watch.
Sent from my HTC One SV using Tapatalk
tried that chap loads of times and nothing tried re-installing firmware and nothing swell. no custom watchfaces installed either just the stock ones
Roxas598 said:
Hey people
Got my smart watch about 4 days ago and it was all good until tonight and now for some reason i can't see the clock anymore unless i press the power button :S i could have sworn it had a low light mode and the clock was visable ok but since tonight i can't see the time unless there's a light pointing straight at the watch. I hooked it upto the service centre thing and updated it through that but hasn't helped.
am I going mad here and just seeing things? :S
EDIT: i also noticed when i turn it off i get some weird colours appearing in the clockface some pinks/purples. i don't understand it was ok a couple of hours ago and it's been on my wrist the whole time :S
Click to expand...
Click to collapse
Just to make it clear, you are not talking about the low power mode right? No backlight, but can be still seen by people in ambient light??? Maybe you should take a picture of the watch so we can clearly see what is going on.
At night my sw2 turns of the screen completely. But when I MOVE the watch it turns on the clock on the display. I think it has an accelerometer that turns off the screen when no movement is detected.
Sent from my GT-N5100 using Tapatalk
severoprisan said:
At night my sw2 turns of the screen completely. But when I MOVE the watch it turns on the clock on the display. I think it has an accelerometer that turns off the screen when no movement is detected.
Sent from my GT-N5100 using Tapatalk
Click to expand...
Click to collapse
The same for me. I think that isn't a bug, but accelerometer
Inviato dal mio LG-D802 utilizzando Tapatalk
It is normal.
It is a feature to save battery when it isn't worn.
I am more curious as to the "watch (display) turns on from moving it". Does the SW2 have an accelerometer? My watch display doesn't kick on when I move it. Or was this a feature of the earlier SmartWatches?
Nomad1600 said:
I am more curious as to the "watch (display) turns on from moving it". Does the SW2 have an accelerometer? My watch display doesn't kick on when I move it. Or was this a feature of the earlier SmartWatches?
Click to expand...
Click to collapse
I believe SW2 does have an accelerometer. Put your watch on a table, leave it untouched for while, screen completely turns off. Not even the low power watch mode is displayed. But once you move it, low power watch comes back on (without the backlight). I observed it many times when it was charging and when left at the bed side table.
But it is not utilized for backlight function. That is a missing feature people are asking for. But I don't really need it. Just like a regular watch, I press a button to turn the light on when I can't see it in the dark.
Sent from my HTC One SV using Tapatalk
thearif said:
I believe SW2 does have an accelerometer. Put your watch on a table, leave it untouched for while, screen completely turns off. Not even the low power watch mode is displayed. But once you move it, low power watch comes back on (without the backlight). I observed it many times when it was charging and when left at the bed side table.
But it is not utilized for backlight function. That is a missing feature people are asking for. But I don't really need it. Just like a regular watch, I press a button to turn the light on when I can't see it in the dark.
Sent from my HTC One SV using Tapatalk
Click to expand...
Click to collapse
Wow... I didn't even notice the screen going completely black after sitting for a while. I am still on watch honeymoon, and either the watch is on my wrist or turned off and on the dresser. But sure enough, it does go into a deeper "sleep" mode and wakes up when I pick it up. Nice!
I do see that having it wake to the backlit mode would be nice but it would seem to kill the battery since when worn it would be in more constant movement. Unless they tuned the accelerometer to only wake when a more significant motion happens.
Nomad1600 said:
Wow... I didn't even notice the screen going completely black after sitting for a while. I am still on watch honeymoon, and either the watch is on my wrist or turned off and on the dresser. But sure enough, it does go into a deeper "sleep" mode and wakes up when I pick it up. Nice!
I do see that having it wake to the backlit mode would be nice but it would seem to kill the battery since when worn it would be in more constant movement. Unless they tuned the accelerometer to only wake when a more significant motion happens.
Click to expand...
Click to collapse
Yeah the previous iteration of smartwatch from Sony did not have always on watchface and it was a necessity. And to see the time you had to turn on the display. One way was to double tap on the watch screen to wake it up. Another way was to light up the screen by lifting your arm and turning the watch towards you. But the second way never really worked reliably.
But I don't think SW2 needs that. As we already have always on watch with great readability even in places where there little light.
Sent from my HTC One SV using Tapatalk
thearif said:
Just to make it clear, you are not talking about the low power mode right? No backlight, but can be still seen by people in ambient light??? Maybe you should take a picture of the watch so we can clearly see what is going on.
Click to expand...
Click to collapse
Sorry for the delay! yeah seems my watch didn't have the low power mode and now it does it's just near impossible to see unless i have some light directly on the screen
Roxas598 said:
Sorry for the delay! basically sitting here in the dark i can't see the time on the display at all but i could when i first got it now I need to actually press the button to see the time :S dunno if it's just me thinking i could or not is the problem lol
Click to expand...
Click to collapse
So there is nothing on the screen not even the low power mode on the watch. I don't know what to tell you boss as you have already done a reset. Maybe one thing to check is to use SUS to reflash the firmware using your pc, if you haven't done it already.
Sent from my HTC One SV using Tapatalk
thearif said:
So there is nothing on the screen not even the low power mode on the watch. I don't know what to tell you boss as you have already done a reset. Maybe one thing to check is to use SUS to reflash the firmware using your pc, if you haven't done it already.
Sent from my HTC One SV using Tapatalk
Click to expand...
Click to collapse
sorry chap i updated my post there is something on the screen but it's impossible to see without some sort of light source on it makes it kinda annoying to use could have sworn it wasn't when i first got it but figured i'd ask anyway!
Roxas598 said:
sorry chap i updated my post there is something on the screen but it's impossible to see without some sort of light source on it makes it kinda annoying to use could have sworn it wasn't when i first got it but figured i'd ask anyway!
Click to expand...
Click to collapse
No problem. I never considered the low power hard to see. But I guess most of the time I am in well lit places
Sent from my HTC One SV using Tapatalk
Coming from the Moto 360 Gen 1 I loved how the clock showed when docked, made a nice bedside clock. As far as I can tell there isn't a way to do this with the S2 is there? I have the screen set to "Always On" and it works great that way on my wrist, get over a days usage with that setting. As soon as I set it on the charger though the screen will time out and go black.
I'm guessing this is to prevent burn in perhaps? Which I'm actually a little concerned about with "Always On" on my wrist, but thats another topic.
So am I missing something or can you not use the Gear S2 as a night stand clock?
Yepp, so far there is no always-on setting for the charging station.
And yes, AMOLEDs can burn in, but this could easily be avoided by shifting the night clock from time to time (like a screen saver).
And no, don't worry about burn in when using always on while wearing. The S2 will show needles only and they also move a tiny bit every time.
OT: I gave up on always on as it really drowns the battery though (by 56-60% compared to off)
ThyMaster
ThyMaster said:
Yepp, so far there is no always-on setting for the charging station.
And yes, AMOLEDs can burn in, but this could easily be avoided by shifting the night clock from time to time (like a screen saver).
And no, don't worry about burn in when using always on while wearing. The S2 will show needles only and they also move a tiny bit every time.
OT: I gave up on always on as it really drowns the battery though (by 56-60% compared to off)
ThyMaster
Click to expand...
Click to collapse
My "Always On" displays a digital clock, no needles... Maybe this is dependent on the watch face you have picked, I haven't tried changing the face with always on switched... well on.
For me it's worth the battery hit, it still easily lasts a day which is all i need
Alive
I found a way. Load the app “Alive“. Turn the switch on. Use a dark watchface (e.g. Simple dark gear), adjust the brightness. Enjoy
Here you see my bedside-clock, you also need "Alive" and put it over night in the charger - it's bright enough for a dark night
In 3 days in store as "OneNightStand"
ThinkD said:
Here you see my bedside-clock, you also need "Alive" and put it over night in the charger - it's bright enough for a dark night
In 3 days in store as "OneNightStand"
Click to expand...
Click to collapse
found it today in the store - looks very nice
Schoebicom said:
found it today in the store - looks very nice
Click to expand...
Click to collapse
In 3 days you may get the "NightStand - second edition" with starry night
Where? I can't find this app. Where do I find it?
Searching for "Nightstand" in store I get this 2 results: "NightStand" and "NightStand - 12h".
Another way: search for "Armin"
AND: If you want to use it all night long you have to activate the APP "I am Alive" !
search for "bedside" for night clock face
You can search for "bedside" as well for an analog clock that minimizes burn in. Bedside Night Table Charging watch face.
---------- Post added at 05:39 PM ---------- Previous post was at 05:36 PM ----------
Schoebicom said:
I found a way. Load the app “Alive“. Turn the switch on. Use a dark watchface (e.g. Simple dark gear), adjust the brightness. Enjoy
Click to expand...
Click to collapse
You can use Bedside Night Table Charging watch face for a minimalist analog night watch face.
You can use Bedside Night Table Charging watch face for a minimalist analog night watch face.
Click to expand...
Click to collapse
... or you use NightStand (together with "Alive") ...
I can't find alive - does it not exist anymore or am I looking for the wrong thing?
portere123 said:
I can't find alive - does it not exist anymore or am I looking for the wrong thing?
Click to expand...
Click to collapse
Search for alive in the Samsung gear store (Galaxy apps not play store)
Hi,
I just bought my Gear S2 classic yesterday.
I am using the (always on mode) and disabled the wake up gesture.
Even though I am using the (always on mode), some times the screen switchs off and I need to press on any button to wake it up.
Any idea on this? is it a fault?
Thanks,
So.. anyone faced this?
Thanks,
I've had this too. Tried everything to figure out why the clock didn't go in to ambient mode. Gave up trying in the end
Then, it sorted itself out the other day after I had rearranged the order of the apps on the app wheel. I'm sure this was just a coincidence though.
Mubble said:
I've had this too. Tried everything to figure out why the clock didn't go in to ambient mode. Gave up trying in the end
Then, it sorted itself out the other day after I had rearranged the order of the apps on the app wheel. I'm sure this was just a coincidence though.
Click to expand...
Click to collapse
Thanks alot... I have just did factory reset to the watch... and let's see... i was using a custom face from Mr. time.. now i am using one of the default faces.
let's see
Yes I was, and still am, using a Mr Time watch face. Think it might be messing up the ambient mode for all watch faces. Although the standard watch faces were doing the same.
Mubble said:
Yes I was, and still am, using a Mr Time watch face. Think it might be messing up the ambient mode for all watch faces. Although the standard watch faces were doing the same.
Click to expand...
Click to collapse
after factory reset and using original watch face it happened again./.. just suddenly the ambient mode goes away and the screen turns to black.. had to move the bezel for the watch to wake up
This appears to be a common problem and based on another thread, it doesn't appear to be fixed in the last firmware release to Korea
ColMustard said:
This appears to be a common problem and based on another thread, it doesn't appear to be fixed in the last firmware release to Korea
Click to expand...
Click to collapse
thanks alot... can you share the link of the other thread?
Is this only happening with Mr time watchfaces or with other watchfaces too?
sefrcoko said:
Is this only happening with Mr time watchfaces or with other watchfaces too?
Click to expand...
Click to collapse
it happens with other watchfaces as well.
my settings:
- always on option is selected (on).
- wake up gesture is not selected (off).
problem: some times the watch hands turns off (like if the "always on" option is not selected.
it works fine for some time and then suddenly i look at the watch.. to find the screen black.
actions taken: using the original watchface, uninstalling Mr. time watchface... factory reset.... non of them helped.
Thanks,
a_k_gano said:
thanks alot... can you share the link of the other thread?
Click to expand...
Click to collapse
http://forum.xda-developers.com/gea...rmware-update-november-20-2015-t3252977/page3
a_k_gano said:
Hi,
I just bought my Gear S2 classic yesterday.
I am using the (always on mode) and disabled the wake up gesture.
Even though I am using the (always on mode), some times the screen switchs off and I need to press on any button to wake it up.
Any idea on this? is it a fault?
Thanks,
Click to expand...
Click to collapse
I thought I was having the same problem, but then put the watch on my wrist and all of a sudden it went into ambient mode. With wake up gesture on, the screen goes to full mode when I glance at the watch. But if I remove the watch from my wrist and put it on the table, the screen goes off completely.
So I guess it detects when watch is on your wrist and acts accordingly.
Hope that helps.
zoltar99 said:
I thought I was having the same problem, but then put the watch on my wrist and all of a sudden it went into ambient mode. With wake up gesture on, the screen goes to full mode when I glance at the watch. But if I remove the watch from my wrist and put it on the table, the screen goes off completely.
So I guess it detects when watch is on your wrist and acts accordingly.
Hope that helps.
Click to expand...
Click to collapse
What you are saying is absolutely right regarding the watch screen turning off when you take it off your wrist for power saving.
but I think what we are talking about is a sort of bug... (when you have always on-on and wake up gesture-off, and the watch will randomly blank the screen while you are wearing it ...) like what is explained in the previous link (another thread).
Thanks alot,
found another thread for same topic as well... looks like a general problem
http://forums.androidcentral.com/samsung-gear-s2/609013-gear-s2-always.html
found another thread for same topic as well... looks like a general problem
http://forums.androidcentral.com/samsung-gear-s2/609013-gear-s2-always.html
a_k_gano said:
found another thread for same topic as well... looks like a general problem
http://forums.androidcentral.com/samsung-gear-s2/609013-gear-s2-always.html
Click to expand...
Click to collapse
one more mentioned the problem
http://developer.samsung.com/forum/...boardName=SDK&messageId=285755&startId=zzzzz~
a_k_gano said:
What you are saying is absolutely right regarding the watch screen turning off when you take it off your wrist for power saving.
but I think what we are talking about is a sort of bug... (when you have always on-on and wake up gesture-off, and the watch will randomly blank the screen while you are wearing it ...) like what is explained in the previous link (another thread).
Thanks alot,
Click to expand...
Click to collapse
Let's hope this is a software issue and Samsung might be able to fix it with a patch very soon.
Are you using the standard strap? I got really frustrated after I put the watch on a perlon band because the ambient mode suddenly wasn't working, and then I realized the strap was covering the heart rate sensor, which is how the watch knows whether or not it's on a wrist. I cut a hole in the strap (and heat-sealed the edges) and back to ambient mode.
tardis_42 said:
Are you using the standard strap? I got really frustrated after I put the watch on a perlon band because the ambient mode suddenly wasn't working, and then I realized the strap was covering the heart rate sensor, which is how the watch knows whether or not it's on a wrist. I cut a hole in the strap (and heat-sealed the edges) and back to ambient mode.
Click to expand...
Click to collapse
Hmm.. I am using the standard strap.. but like to make it lose.. do you think it should be tight on hand ? .. and are you sure it is the heart rate sensor is the one that monitors? or it is by movement..
I got the latest firmware yesterday (that was in Korea few days ago).. and the same problem happened again... so i thought it is a bug and not yet fixed...
i will try to make the watch sealed on my hand and will see.. thanks for the advise... will let you know the result
Even after tightening the strap, the display goes black after a while. So annoying... I cant believe Samsung couldn't get something so simple as always on ambient mode correctly. Their software shortcomings are increasingly becoming irritating.
Sent from my Nexus 5X using Tapatalk
I use Always On Display (AOD) all the time. With my previous watch (S2 Classic) it used to shift every minute or so to prevent burn-in.
I watched very closely the S3 AOD and I cannot see any shifting whatsoever, with both stock and non-stock watch faces.
Have you guys noticed the same, or is there something wrong with mine?
dadonev said:
I use Always On Display (AOD) all the time. With my previous watch (S2 Classic) it used to shift every minute or so to prevent burn-in.
I watched very closely the S3 AOD and I cannot see any shifting whatsoever, with both stock and non-stock watch faces.
Have you guys noticed the same, or is there something wrong with mine?
Click to expand...
Click to collapse
Same thing with mine and after 2 or 3 days it would leave a ghosting effect on the screen but it would eventually go away when turning off always on. I have tried resetting the watch to see if it worked but still doesnt. Im hoping its a software issue and will eventually be fixed.
Where do you see this "ghosting" effect, screen switched off or some black menu screen? I presume this is initial sign of burn-in.
I switch off AOD at night and change watch faces regularly. I can't live with a black screen watch, so for now changing faces is my way to work around this.
Its by the hour marks. And i can see it whenever i get a notification and when the screen is gray. But its gone now. It happened twice so im just going to wait for an update to see if it fixes the always on.
First of all I am not talking about Notification light.
A Red light in proximity sensor next to sony logo is always on when device is connected to wifi, or when connected to mobile data only whrn the arrow indicators appears.
This red light is on even if i disable adaptive brightness.
I am shocked why no one raised this quesrion.
Hence here I am.
I hope this is not intentional by Sony.
Coz ffs i cant get one thing to my mind that how it is helpful. It is rather annoying.
Anyone with a clue pls share.
agentsandy007 said:
First of all I am not talking about Notification light.
A Red light in proximity sensor next to sony logo is always on when device is connected to wifi, or when connected to mobile data only whrn the arrow indicators appears.
This red light is on even if i disable adaptive brightness.
I am shocked why no one raised this quesrion.
Hence here I am.
I hope this is not intentional by Sony.
Coz ffs i cant get one thing to my mind that how it is helpful. It is rather annoying.
Anyone with a clue pls share.
Click to expand...
Click to collapse
It's on on my phone as well. It was also like that on my Xperia X
I call it the "I'm watching you." light. I think its the proximity sensor's lazer. I dont think it should be on 24/7, but then there is this "Led light's lifetime depends on how many times they are turned on/off" thing. May be it is some kind of an optimisation?
cizkek_ said:
I call it the "I'm watching you." light. I think its the proximity sensor's lazer. I dont think it should be on 24/7, but then there is this "Led light's lifetime depends on how many times they are turned on/off" thing. May be it is some kind of an optimisation?
Click to expand...
Click to collapse
It definitely has to do with data recieving signals.
But whatever it is for I am concerned about battery life
It is just plain stupid of sony to not recognize this.
Coming from z5 I thought speakers were average on z5, but I doubt XZ even have any speakers at all.
Sound is that bad on XZ. I can barely listen to ringtone and I was sitting right next to the phone. What if we are in the other room or @ some distance? We' ll definitely miss the call.
Disable adaptive brightness and the flickery red dot will go off. I can only see it in a darkened room so it doesn't bother me. I'm looking at the screen lol!
Sent from my F8331 using Tapatalk
LadFromWales85 said:
Disable adaptive brightness and the flickery red dot will go off. I can only see it in a darkened room so it doesn't bother me. I'm looking at the screen lol!
Click to expand...
Click to collapse
It bothers me when people don't read ?
agentsandy007 said:
First of all I am not talking about Notification light.
A Red light in proximity sensor next to sony logo is always on when device is connected to wifi, or when connected to mobile data only whrn the arrow indicators appears.
This red light is on even if i disable adaptive brightness.
I am shocked why no one raised this quesrion.
Hence here I am.
I hope this is not intentional by Sony.
Coz ffs i cant get one thing to my mind that how it is helpful. It is rather annoying.
Anyone with a clue pls share.
Click to expand...
Click to collapse
this is wierd...becouse if i turn off adaptive brightnes the red led light turns off but it blinks when turned on...definetly something wrong with ur sensor..nothing new these days,its a comon thing for sensors to be broken
cocagenda2 said:
this is wierd...becouse if i turn off adaptive brightnes the red led light turns off but it blinks when turned on...definetly something wrong with ur sensor..nothing new these days,its a comon thing for sensors to be broken
Click to expand...
Click to collapse
Interesting.
With the same settings as before, now red light is on only on the lock screen.
I noticed just when i was reading your reply.
agentsandy007 said:
Interesting.
With the same settings as before, now red light is on only on the lock screen.
I noticed just when i was reading your reply.
Click to expand...
Click to collapse
so u say that red light turns on only on lock screen...what happens when u unlock the phone is it still on (red light)? becouse mine is always on except when screen is locked and turned off course and then it turns on again when i turn the screen on...this is how sensor should work... If urs doesnt work that way then go send the phone to waranty... I wouldnt investigate anyomre just go to Sony.
cocagenda2 said:
so u say that red light turns on only on lock screen...what happens when u unlock the phone is it still on (red light)? becouse mine is always on except when screen is locked and turned off course and then it turns on again when i turn the screen on...this is how sensor should work... If urs doesnt work that way then go send the phone to waranty... I wouldnt investigate anyomre just go to Sony.
Click to expand...
Click to collapse
Until yesterday it used to be always on, but now only on the lockscreen. It stays off when I unlock the device.
Why can't we seen to find the real use of that light?
Is it even a feature?
agentsandy007 said:
Until yesterday it used to be always on, but now only on the lockscreen. It stays off when I unlock the device.
Why can't we seen to find the real use of that light?
Is it even a feature?
Click to expand...
Click to collapse
looks like this proximty sensor works that way by having red light turned on...so does ur adaptive brightnes still work after it turns off when u unlock the screen?i feel its faulty sensor!i can share u my experience with Z5...i had white spots on screen so i send it to repair and they replaced the screen but also they managed to break proxity sensor aswell... i actualy laughed out loud how can they be so careless ahhh nwm hope u fix it soon.
cocagenda2 said:
looks like this proximty sensor works that way by having red light turned on...so does ur adaptive brightnes still work after it turns off when u unlock the screen?i feel its faulty sensor!i can share u my experience with Z5...i had white spots on screen so i send it to repair and they replaced the screen but also they managed to break proxity sensor aswell... i actualy laughed out loud how can they be so careless ahhh nwm hope u fix it soon.
Click to expand...
Click to collapse
Well now I get it, atleast I think so.
Red light stays on if we turn on adaptive brightness.
It also turns on when data packets are being sent to our device (via wifi or mobile data)
But why? That is the main question here.
Previous devices never had this feature, and what diff does this make?
Looks like my adaptive brightness works fine.
Do you mean the light in the attachment?
It should be the infra-red light used by the proximity sensor anmd it is not meant to be seen by human. I can only take this from the camera of another device but I cannot actually see it.
Trust me, if you tries to use the camera of another device to view it, you will see it blinks a lot when the screen is on.
l3enjamin said:
Do you mean the light in the attachment?
It should be the infra-red light used by the proximity sensor anmd it is not meant to be seen by human. I can only take this from the camera of another device but I cannot actually see it.
Trust me, if you tries to use the camera of another device to view it, you will see it blinks a lot when the screen is on.
Click to expand...
Click to collapse
That is exactly what I am talkin about.
It is not supposed to be visible for naked eye until you use a camera.
This one just stays on. Doesn't blink.
l3enjamin said:
Do you mean the light in the attachment?
It should be the infra-red light used by the proximity sensor anmd it is not meant to be seen by human. I can only take this from the camera of another device but I cannot actually see it.
Trust me, if you tries to use the camera of another device to view it, you will see it blinks a lot when the screen is on.
Click to expand...
Click to collapse
OK so looks like im having a camera in my eyes LOL cuz i can see that red dot light constantly turned on...ill see what Sony will say about that.im gonna call waranty just for curiosity.maybe they know something
There may be some variation of the wavelength produced by that LED from device to device, while I cannot see it in my XZ, I can saw it in my last LG device. It won't cause any battery draining problem because either you see it or not, it is still blinking.
My God
This is not a problem
By using this proximity sensor our phone controls the automatic brightness setting.
which is called Adaptive Brightness
zohaib0001 said:
My God
This is not a problem
By using this proximity sensor our phone controls the automatic brightness setting.
which is called Adaptive Brightness
Click to expand...
Click to collapse
hey buddy we all know that but we just want to clarify why some ppl can see the light and some not.... read next time
Xperia X and XZs does this and its annoying, Sony obviously did a bad job in defining what's visible to humans.