[Q] Flashing Question - General Questions and Answers

I succesfully added clockwork recovery, and installed the cyanogen mod 10.1 (4.2.2) to my phone, however when I click reboot, it gets stuck on the Samsung Logo
I then took the battery out and did a dalvic cache clear but the same issue occured... My install was succesfull, its just that it gets stuck on the Samsung Logo...
what have I done wrong?? Should I try install a different mod?? Or have I bricked my phone?? Or is there a foolproof way of installing a mod using Odin??
PS: (additional info)
I renamed the mod file before installing if that helps
I have no backup files
the only thing I can access on the phone atm is the Recovery Mode and Download Mode...

You would have backed up your previous rom..try fixing permissions....if not check cynogenmod is for your device or not.... If not download your device os reflash it by installing stock recovery.
Sent from my Micromax A110Q using xda app-developers app

I dont want to hijack this thread, but I have basically the same problem. I rooted my GT-I9300 phone and all was well, until I ran "NoBloat" to remove unwanted apps. Thereafter it runs up to the Samsung logo, then I get the following messages in succession: "Unfortunately messaging has stopped", "Unfortunately the process com.android has stopped", "smartcard service has failed" and "unfortunately the phone has stopped". I removed the battery, tried to flash the ROM again using the standard Samsung.tar file to restore to factory settings, but it made no difference. I am able to read the S3 files when linked to my Desktop and I can get it into download mode. I have run out of ideas and need help from the clever members.

If you get force closes fix permissions
Hit thanks if I helped
Sent from my Xperia Live with Walkman using xda app-developers app

Firstly, cwm doesn't work. Its garbage. I've semi bricked my phone well over 10 times trying to flash cm on it with cwm. Install goomanager and install TWRP to flash.
Secondly, once into TWRP recovery. Go to wipe>advance wipe> and select delvik cache, data, cahce, storage. Then go back to TWRP home and install the cm 10.1 and also the gapps package.
Sent from my SPH-L710 using xda app-developers app

Jeanrick said:
I dont want to hijack this thread, but I have basically the same problem. I rooted my GT-I9300 phone and all was well, until I ran "NoBloat" to remove unwanted apps. Thereafter it runs up to the Samsung logo, then I get the following messages in succession: "Unfortunately messaging has stopped", "Unfortunately the process com.android has stopped", "smartcard service has failed" and "unfortunately the phone has stopped". I removed the battery, tried to flash the ROM again using the standard Samsung.tar file to restore to factory settings, but it made no difference. I am able to read the S3 files when linked to my Desktop and I can get it into download mode. I have run out of ideas and need help from the clever members.
Click to expand...
Click to collapse
I think that bloatware app has taken away crucial files needed to keep the stability of an app up...
I don't know what I would do to fix that...
PS: please message me the samsung.tar file

dalton912 said:
Firstly, cwm doesn't work. Its garbage. I've semi bricked my phone well over 10 times trying to flash cm on it with cwm. Install goomanager and install TWRP to flash.
Secondly, once into TWRP recovery. Go to wipe>advance wipe> and select delvik cache, data, cahce, storage. Then go back to TWRP home and install the cm 10.1 and also the gapps package.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
if you dont like cyangenmod why did you brick your phone 10 times, why did you even go on after the second brick?

I love cm. I dislike cwm. I wanted the 4.3 jb on my phone.
Sent from my SPH-L710 using xda app-developers app

Related

[Q] Help cyanogenmod boot animation

Hello,
I have a Verizon Galaxy S III, new, just followed the tutorial here: http://forum.xda-developers.com/showthread.php?t=1875914,
I used Rom Manager and tried to flash CM 10 from my external sd card and I got the following error message:
"E: failed to verify whole-file signature
E: signature verification failed"
from this point I was able to reboot the phone and the phone worked fine (with touchwiz and original android 4.0.4).
I then used EZ Rom from this tutorial to try to accomplish the same thing (http://forum.xda-developers.com/showthread.php?t=1762709)
I selected CWM 6.0.1 and it allowed me to select the nightly CM 10 zip file I had put on the external sd,
I then installed from sd the gapps from the same tutorial.
All appeared to be normal and I then rebooted the phone and now all it will do is show the cyanogenmod boot animation.
I have tried taking out the battery and restarting it but that does not fix things, I still get the cyanogenmod boot animation and nothing else.
Can anyone offer any suggestions? Sorry, I have searched the forums but cannot find an answer.
Regards,
M
Also, I believe I had accomplished rooting and unlocking correctly with the exception of no audio "Unlocked" message--that is, I only got a "your phone is unlocked" message on screen when I used the unlock app. I did not get the audio as the tutorial said I would.
Did you do a factory data reset?
Sent from my SCH-I535 using xda app-developers app
kintwofan said:
Did you do a factory data reset?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
no i did not,
am I hosed?
thanks,
skybronco said:
no i did not,
I'm I hosed?
thanks,
Click to expand...
Click to collapse
No problem pull battery, put it in hold volume + home and power all at same time for recovery. Select data rest then select when done
Sent from my SCH-I535 using xda app-developers app
kintwofan said:
No problem pull battery, put it in hold volume + home and power all at same time for recovery. Select data rest then select when done
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
First off, thank you kintwofan for taking the time to help me, I appreciate it.
So I pulled the battery, held volume up+home key+pwr and was able to get into recovery,
I selected data reset
Now when I boot up the phone the cyanogenmod boot animation appears and I get a message "unfortunately, the process com.google.process.gapps has stopped and I can select ok
then I get a message set up wizard has stopped.
should I pull the battery and try to install from sd card the CM10 nightly zip file again?
Thanks,
I would say go back to recovery. Factory reset again, under advanced wipe dalvik cache and under mounts wipe system. The flash cm10 and I gapps again. By the way what gapps do you have?
Sent from my SCH-I535 using xda app-developers app
kintwofan said:
I would say go back to recovery. Factory reset again, under advanced wipe dalvik cache and under mounts wipe system. The flash cm10 and I gapps again. By the way what gapps do you have?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
These are the gapps I have (JellyBean Gapps- //goo.im/gapps/gapps-jb-20121011-signed.zip
I will try your suggestions and report back,
Thanks,
M
kintwofan said:
I would say go back to recovery. Factory reset again, under advanced wipe dalvik cache and under mounts wipe system. The flash cm10 and I gapps again. By the way what gapps do you have?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I did the factory reset, then wiped dalvik cache, then I chose format/system under wipes and mount.
I then installed from external sd the CM10 nightly
I did not install the gapps zip file this time,
and rebooted.
now the phone boots up and and appears relatively normal (compared to my Galaxy nexus)
the android version says 4.2.1
However, there is no service, it does not connect to verizon.
if i make the screen black then hit power, the message at the bottom of the phone says "no sim card" but my sim card is installed (haven't taken it out at all)
What should I do next (can't tell you how much I appreciate this--I will pay you!!)
skybronco said:
I did the factory reset, then wiped dalvik cache, then I chose format/system under wipes and mount.
I then installed from external sd the CM10 nightly
I did not install the gapps zip file this time,
and rebooted.
now the phone boots up and and appears relatively normal (compared to my Galaxy nexus)
the android version says 4.2.1
However, there is no service, it does not connect to verizon.
if i make the screen black then hit power, the message at the bottom of the phone says "no sim card" but my sim card is installed (haven't taken it out at all)
What should I do next (can't tell you how much I appreciate this--I will pay you!!)
Click to expand...
Click to collapse
I can see that the gapps file was not for android 4.2.1 but rather 4.1
so starting over with the factory data reset etc, will report back soon, fyi i found a gapps for 4.2.1 here (http://goo.im/devs/PureMod/GAPPS/gapps-jb-20121130-4.2.1-signed.zip
skybronco said:
I can see that the gapps file was not for android 4.2.1 but rather 4.1
so starting over with the factory data reset etc, will report back soon, fyi i found a gapps for 4.2.1 here (http://goo.im/devs/PureMod/GAPPS/gapps-jb-20121130-4.2.1-signed.zip
Click to expand...
Click to collapse
I've successfully got the correct gapps on the phone now, but no service, it says no sim card
I took the sim out and re installed but no luck there, searched the forums and not successful at seeing a fix either,
any suggestions here?
Flash one if the unofficial builds from here and under mobile network change your subscription type to rui/sim
Sent from my SCH-I535 using xda app-developers app
kintwofan said:
Flash one if the unofficial builds from here
Click to expand...
Click to collapse
where?
and under mobile network change your subscription type to rui/sim
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I'd like to use CM.
Is what you're referring to a rom from someone else?
Thanks again,
M

Steps before installing a custom ROM ?

I just rooted my Samsung GT-S5830i
I installed clockwork recover and made a backup too
I would like to install a custom ROM on my phone.. what are the necessary steps to follow before doing so ?
First, make a backup of you current rom. Then I would just go a head and follow whatever directions are supplied for the rom you want (some roms require special work). If no instructions are presented, do a wipe (factory reset or whatever) through cwmr, wipe the dalvik cache (under advanced), and install your rom!
Good luck I'll gladly answer any questions/problems you have.
Sent form my SGH-i927 running dman's cm10.1
scottbot95 said:
First, make a backup of you current rom. Then I would just go a head and follow whatever directions are supplied for the rom you want (some roms require special work). If no instructions are presented, do a wipe (factory reset or whatever) through cwmr, wipe the dalvik cache (under advanced), and install your rom!
Good luck I'll gladly answer any questions/problems you have.
Sent form my SGH-i927 running dman's cm10.1
Click to expand...
Click to collapse
i didnt do a factory reset, and installed jelly blast.. my phone got bricked, i had to flash through odin.. i was the only person who had the problem, you think it might have been because i didnt factory reset ?
hujjaini said:
i didnt do a factory reset, and installed jelly blast.. my phone got bricked, i had to flash through odin.. i was the only person who had the problem, you think it might have been because i didnt factory reset ?
Click to expand...
Click to collapse
It wasn't that.The only thing you must do before installing it is to root your phone, after that you just follow the custom rom's specific installing instructions.
unfragable said:
It wasn't that.The only thing you must do before installing it is to root your phone, after that you just follow the custom rom's specific installing instructions.
Click to expand...
Click to collapse
Last night, I tried it again, I downloaded the ported jelly blast v 3 for s5830i, made a back up of my current ROM, wiped my data, wiped dalvik cache, placed the jelly blast in my sd card and flashed it through clock work recovery, I still got stuck in a boot loop..
Hello,
Try toggling signature verification and then flash custom ROM. Hope this solves ur problem.
Sent from my LG-P350 using xda app-developers app
vivek_p08 said:
Hello,
Try toggling signature verification and then flash custom ROM. Hope this solves ur problem.
Sent from my LG-P350 using xda app-developers app
Click to expand...
Click to collapse
how do i toggle signature verification ?
You can see option for toggling in your recovery mode. Select that and then flash Rom.
Sent from my LG-P350 using xda app-developers app
vivek_p08 said:
You can see option for toggling in your recovery mode. Select that and then flash Rom.
Sent from my LG-P350 using xda app-developers app
Click to expand...
Click to collapse
There was no toggling option in my recovery mode..
Please do search properly. Usually u can see option for toggling signature verification when u select apply update from sdcard option....
If u can't find then try installing recovery mod again.
Sent from my LG-P350 using xda app-developers app
vivek_p08 said:
Please do search properly. Usually u can see option for toggling signature verification when u select apply update from sdcard option....
If u can't find then try installing recovery mod again.
Sent from my LG-P350 using xda app-developers app
Click to expand...
Click to collapse
I installed recovery again, I found the toggle signature verification option, could you tell me how toggling signature verification makes a difference?
By toggling signature verification, verification of digital sign of your zip file is skipped. Thus allowing to use/ flash ROMS( most of them are unsigned)
Did that work??
Sent from my LG-P350 using xda app-developers app
Sent from my GT-S5830i using xda app-developers app
I haven't tried it yet.. I'll let you know what happens when I try it though..
Thanks for all the info! Flashed my first couple roms (including CM10) and I am loving it compared to stock!
jokesonme said:
Thanks for all the info! Flashed my first couple roms (including CM10) and I am loving it compared to stock!
Click to expand...
Click to collapse
Don't just say it.... hit THANKS
The last couple of times I experienced this
The last couple of times that I got stuck in a bootloop, what fixed it was a re-wipe of data, cache and dalvik after the installation of the ROM. Don't know if that helps at all but hope that it does. That could be ROM specific, but it might be worth a shot (easier than restoring to stock again).
Examples of where developers have suggested wiping cache/dalvik after flashing the ROM
http://forum.xda-developers.com/showthread.php?t=1957348
http://forum.xda-developers.com/showthread.php?t=1822409
http://forum.xda-developers.com/showthread.php?t=1964339
Can't find where I saw the wipe data section, it was somewhere.
Also, I use SMS backup, which syncs SMS's with gmail, so you can back those up and restore should you change again. Available in the play store.

[HELP] bugs found on ViperOneS v2.0

I've just flashed the ViperOneS v2.0 from v1.2.1 yesterday, I've followed all the instruction from the thread. After flashing the Rom, it keeps showing "Unfortunately, the process android.process.acore has stopped." I tried to send a bug report through the Venom Hub app, but it keeps telling the there is a error and it is unable to send the report. Can anyone tell me how to fix it?
Sent from my HTC One S using xda premium
re-download rom and check md5
did you flash boot image per instructions, if under .13 hboot you may be able to flash just the rom and no need to fastboot boot image
but, you need to wipe all including system in recovery 2X and not in aroma. i have my best luck that way
also try a full rom install as opposed to custom, if you did a custom
rugmankc said:
re-download rom and check md5
did you flash boot image per instructions, if under .13 hboot you may be able to flash just the rom and no need to fastboot boot image
but, you need to wipe all including system in recovery 2X and not in aroma. i have my best luck that way
also try a full rom install as opposed to custom, if you did a custom
Click to expand...
Click to collapse
my hboot is 1.13 and I did factory twice before flashing the rom, I'll try it again anyway. thanks for your help
I also experienced force close on certain app, is there any solution for it?
I've tried to wipe all the stuff and reinstall the rom, but the problem still exists. Is there any other solution for it? I can't even manage my contacts , whenever I want to link ny contacts, it force closes by itself.
Sent from my HTC One S using xda premium
cs96 said:
I've tried to wipe all the stuff and reinstall the rom, but the problem still exists. Is there any other solution for it? I can't even manage my contacts , whenever I want to link ny contacts, it force closes by itself.
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
Wipe systém twice
Sent from my HTC One S using xda app-developers app
I tried wiping all the stuffs twice, but the problem still exists
Sent from my HTC One S using xda premium
also on fc's clear apps data for tweaks and hub
redo it all again, but this time wipe sdcard first. of course back card up before wiping, just don't restore. i think new rom flash will repopulate what must be there like android secure and a couple others. someone can confirm that.
if it don't work you may want to go back to stock and start over
Is it necessary to wipe the sd card also? btw, I've lost the 3G connection after flashing the rom, I can only connect to the GSM network and when I switch to WCDMA only in my network setting, my phone shows no service is available. Is it the problem of the radio?
Sent from my HTC One S using xda premium
i can use any radio and have no issues
start over with a fresh flash of 2.1 the upgarde manually
don't have to wipe sdcard
but if you start over with full wipe 3x including system. and reformat your sdcard before doing all that. it only leaves your phone. not all phones work well on all roms.
best to fastboot boot image
don't wipe in recovery and aroma, just aroma
don't use twrp 2.4.3.0, or what ever number is for latest--leaving work so kinda in hurry
after you boot first time, reboot and clear caches and boot back into os
claer data on tweaks and hub apk's
not saying you need to do all this, it just eliminates everything but your phone
anyway--good luck
I got the same problem and just reflashed everything and it worked.
I tried reflashing everything but the problem still exists
Sent from my HTC One S using xda premium

[OFFICIAL][4.2.2] PAC-Man ROM v21.0.1 STUCK ON LOGO SHOW

So i got the intall from http://forum.xda-developers.com/showthread.php?t=2178402
Wiped dalvik 3 times, wiped cache, formatted system and data.
Then i had to edit the updater-script to remove the first line. After i have done that the rom installed.
After rom installed i installed gapps without doing a restart.
After restart the phone is stuck on the logo show. (Pacman and 3 ghosts + samsung) The animation on the logo is goign so i gave it some time and it never boot up. Tried pulling the battery and another restart, still no go. On my second try i installed the rom without gapps thinking it might have caused the bad boot but it's suck again. Can you guys point me in the right direction? The phone doesnt give any feedback of what is going wrong.
I727, update from sky ICS(june), kernel 3.0(if i remember correctly)
mcpeter said:
So i got the intall from http://forum.xda-developers.com/showthread.php?t=2178402
Wiped dalvik 3 times, wiped cache, formatted system and data.
Then i had to edit the updater-script to remove the first line. After i have done that the rom installed.
After rom installed i installed gapps without doing a restart.
After restart the phone is stuck on the logo show. (Pacman and 3 ghosts + samsung) The animation on the logo is goign so i gave it some time and it never boot up. Tried pulling the battery and another restart, still no go. On my second try i installed the rom without gapps thinking it might have caused the bad boot but it's suck again. Can you guys point me in the right direction? The phone doesnt give any feedback of what is going wrong.
I727, update from sky ICS(june), kernel 3.0(if i remember correctly)
Click to expand...
Click to collapse
I have tried looking through google and xda forums for the answer and sadly i didnt find anyone with the same problem.
mcpeter said:
I have tried looking through google and xda forums for the answer and sadly i didnt find anyone with the same problem.
Click to expand...
Click to collapse
Ok so i have installed newest sky ics again and the install wasnt a problem at all + everything ran fine. Then i went to update clockwork mod, downloaded the original pacman(the one with the line intact) reinstalled without gapps and still no go. I cant figure our the deal with this rob. Even tho im not a rom developer myself i have a strong programming background and i attend an IT college right now. Here's my 2 cents to the developer of PACMAN for Skyrocket.
1st thanks for all you hard work.
2nd. please make indicators during the install to see how is the progress going because right now it's like installing and then sucessfully updated. 3rd first boot should be console boot to indicate what is blockign the freakign rom. I spent my whole day trying to figure this out and noone would help + the app has absolutely no feedback for the user to trouble shoot.
Lol its not the ROM mate. Hate to tell you but its not also bootlooping on install is a common issue for some of you so my guess is you are not searching with proper terms.
Here is your bone: wipe cache and dalvik from recovery if its boot looping like that.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
mtdew said:
Lol its not the ROM mate. Hate to tell you but its not also bootlooping on install is a common issue for some of you so my guess is you are not searching with proper terms.
Here is your bone: wipe cache and dalvik from recovery if its boot looping like that.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Hey thanks for replay. When i tried to format cache the phone just said it's formatting and stayed there untill the screen went black and restarted.
mcpeter said:
Hey thanks for replay. When i tried to format cache the phone just said it's formatting and stayed there untill the screen went black and restarted.
Click to expand...
Click to collapse
Something else is wrong then what recovery are you using and what version and where did you get it.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
mtdew said:
Something else is wrong then what recovery are you using and what version and where did you get it.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Im using CWM R 6.0.1.4 and i got it from rom manager.
mcpeter said:
Im using CWM R 6.0.1.4 and i got it from rom manager.
Click to expand...
Click to collapse
Switch to sk8's in the dev section or twrp never rely on ROM manager for anything on this phone. That still doesn't explain why your phone would reboot while wiping cache.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
mtdew said:
Switch to sk8's in the dev section or twrp never rely on ROM manager for anything on this phone. That still doesn't explain why your phone would reboot while wiping cache.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
I have switched to twrp and it looks more advanced. I have tried to do a cache wipe and the twrp hang too. It seem like i cant access the cache E: patiotion. When i try to save logs from the phone i get:
Finished running boot script.
E:Cant open /cache/recovery/log
E:Cant open /cache/recovery/last_log
E:Cant open /cache/recovery/last_install
EataManager:; Output_version -- Unable to make
Copied Recovery log to /sdcard (Note the sc card wasnt even in the phone at the time of this)
Also when i tried to do a first dalvic wipe i got the same errors but after the first one i get the wipe complete message.
What are you trying to do right now? You probably had a bad download of pac man when you first started. Did you check md5 checksum? Now you don't have external SD card in? Its hard to help when not clear what you're trying to do.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Wrong section, and you shouldn't use anything from ROM manager like mtdew said
switch to twrp and try again
Sent via Samsung Skyrocket
mcpeter said:
I have switched to twrp and it looks more advanced. I have tried to do a cache wipe and the twrp hang too. It seem like i cant access the cache E: patiotion. When i try to save logs from the phone i get:
Finished running boot script.
E:Cant open /cache/recovery/log
E:Cant open /cache/recovery/last_log
E:Cant open /cache/recovery/last_install
EataManager:; Output_version -- Unable to make
Copied Recovery log to /sdcard (Note the sc card wasnt even in the phone at the time of this)
Also when i tried to do a first dalvic wipe i got the same errors but after the first one i get the wipe complete message.
Click to expand...
Click to collapse
1. Copy Pacman rom on external sd card.
2. Use latest Twrp and boot into recovery and select 'wipe'
3. Wipe cache, dalvik, Factory reset, system & internal storage.
4. Go back to main twrp screen and select install.
5. Find rom on and External card and install.
You should have no problems. It is a great rom.
Sent from my SAMSUNG-SGH-I727 using xda premium

[Q] Can't reinstall apps after flashing CyanogenMod

I just rooted my Verizon Galaxy SIII (MF1) via Casual and flashed CM 10.1.2. Only problem is I can't reinstall any of my apps. I've tried pushing apps from my PC to my phone. Downloading while online from the phone itself. I used titanium backup and backed up everything before the flash, but I can't figure out how to access the data I backed up. Sorry, I'm a noob, but I searched for hours and couldn't find a solution to this specific problem.
(Also, my camera hasn't worked since the flash)
Did you flash the gapps package after flashing the rom?
Sent from the future via Tapatalk 4
edfunkycold said:
Did you flash the gapps package after flashing the rom?
Sent from the future via Tapatalk 4
Click to expand...
Click to collapse
Yes, and now I just get a message that says "Unfortunately, Setup Wizard has stopped." As soon as I press OK it pops up again instantly ad infinitum. And now my phone won't boot into recovery!
Go into recovery wipe cache and dalvik reflash the rom and gapps.
Edit: sorry missed the can't get into recovery. Do you have goo manager or rom Manager depending on which recovery you use and reflash recovery via app. If not as next user pointed out Odin is your friend.
Sent from the future via Tapatalk 4
edfunkycold said:
Go into recovery wipe cache and dalvik reflash the rom and gapps.
Sent from the future via Tapatalk 4
Click to expand...
Click to collapse
They just said that they can't get into recovery am I right? try using Odin or something similar to flash the latest version of cwm recovery then try wat edfunkycold suggested :thumbup: goodluck
Sent from my One X using xda app-developers app
edfunkycold said:
Go into recovery wipe cache and dalvik reflash the rom and gapps.
Sent from the future via Tapatalk 4
Click to expand...
Click to collapse
That's what I'm trying to do...unfortunately my phone will not boot into recovery. Holding down proper buttons does not work. And since I'm stuck on this error message I can't get to terminal app to reboot. And when I hold power button the "boot in recovery" option is not there.
windom--earle said:
That's what I'm trying to do...unfortunately my phone will not boot into recovery. Holding down proper buttons does not work. And since I'm stuck on this error message I can't get to terminal app to reboot. And when I hold power button the "boot in recovery" option is not there.
Click to expand...
Click to collapse
Turn the phone off. Then press HOME>POWER>VOLUME UP at the same time this will boot you into recovery.
Sent from the future via Tapatalk 4
lolz maybe they were using the wrong button combo all along
Sent from my One X using xda app-developers app
edfunkycold said:
Turn the phone off. Then press HOME>POWER>VOLUME UP at the same time this will boot you into recovery.
Sent from the future via Tapatalk 4
Click to expand...
Click to collapse
Ok, I got it to boot in recovery mode. I wiped dalvik and cache and then reflashed ROM and gapps. Still getting exact same error message.
windom--earle said:
Ok, I got it to boot in recovery mode. I wiped dalvik and cache and then reflashed ROM and gapps. Still getting exact same error message.
Click to expand...
Click to collapse
Then the only suggestion i have is to flash stock rooted rom or any TW rom and see if the phone works properly. Then we can proceed fresh again. If you run into issues on TW rom then a full odin to stock might be required.
Sent from the future via Tapatalk 4
all eaeuni
edfunkycold said:
Then the only suggestion i have is to flash stock rooted rom or any TW rom and see if the phone works properly. Then we can proceed fresh again. If you run into issues on TW rom then a full odin to stock might be required.
Sent from the future via Tapatalk 4
Click to expand...
Click to collapse
Ok I just flashed my stock rooted rom and everything seems to be working just fine. I think I'm going to hold off on flashing a custom rom again. Want to do some more research first. Thanks for everyone's help!

Categories

Resources