[Q] Help Choosing a ROM for LG Optimus 3D (P920) - LG Optimus 3D

Hello guys,
This is my first post so I would like to say hello and thanks to everyone who contributes to the forum.
I have the LG Optimus 3D (P920) currently on the version below. I have had terrible problems with ghost calls and battery being drained extremely quickly when using 3G connectivity. To get around these problems I have been using 2G since 2011 when I upgraded the software via LG website.
My question is could somebody please advise me of a stable ROM I can use to upgrade from the below version and instructions on how to install it?, any help would be greatly appreciated. I've looked at ROMS but there are so many different ones I don't know which one would be suitable to upgrade from my current version.
Official LG ROM
Android ver 2.3.5
Baseband ver L620_MODEM_SIC_01.1042.00
Build GRJ90
Software Version LGP920-V20a-NOV-30-2011
Best Regards
Chimaera

chimaera500 said:
Hello guys,
This is my first post so I would like to say hello and thanks to everyone who contributes to the forum.
I have the LG Optimus 3D (P920) currently on the version below. I have had terrible problems with ghost calls and battery being drained extremely quickly when using 3G connectivity. To get around these problems I have been using 2G since 2011 when I upgraded the software via LG website.
My question is could somebody please advise me of a stable ROM I can use to upgrade from the below version and instructions on how to install it?, any help would be greatly appreciated. I've looked at ROMS but there are so many different ones I don't know which one would be suitable to upgrade from my current version.
Official LG ROM
Android ver 2.3.5
Baseband ver L620_MODEM_SIC_01.1042.00
Build GRJ90
Software Version LGP920-V20a-NOV-30-2011
Best Regards
Chimaera
Click to expand...
Click to collapse
You really need to update to ICS. You can get official upgrade via lg software update using LG pcsuite, or you can do it by following the guide listed in the forum.There are quite a few but this one is good.
http://forum.xda-developers.com/showthread.php?t=2195753
The rom I am using is jellycream v2 by optimusRS, and am very pleased with it.

keith210350 said:
You really need to update to ICS. You can get official upgrade via lg software update using LG pcsuite, or you can do it by following the guide listed in the forum.There are quite a few but this one is good.
http://forum.xda-developers.com/showthread.php?t=2195753
The rom I am using is jellycream v2 by optimusRS, and am very pleased with it.
Click to expand...
Click to collapse
Hi Keith210350,
Thanks for your reply and help. I have tried he official LG update via pcsuite, it tells me there is an update then when I try to update its gets about 40% through analysing pc settings then bombs out saying I am already at the latest software version.
I am trying to flash the ROM you mentioned all goes well until I get to the flash tool, I can select the .dll and .bin files then progress to the next step where I press the arrow start button but it doesn't seem to select the port or say ready but my phone shows a grey circle with two green arrows in it then some writing that starts with S/W then chinese writing, at this point I'm not sure if its updating or not any ideas?
BTW I'm using Win 7 Pro 64Bit
Best Regards
Chimaera500

Check driver install carefully, all details. If that is not correct, flash will not proceed as described. The S/W means your phone is in download mode.
You should be seeing a progress bar going from 0% to 100% (for the .bin).
Also, if you still have drivers on your pc from when you tried update tool, they will conflict with the ones from the guide.

drastic00 said:
Check driver install carefully, all details. If that is not correct, flash will not proceed as described. The S/W means your phone is in download mode.
You should be seeing a progress bar going from 0% to 100% (for the .bin).
Also, if you still have drivers on your pc from when you tried update tool, they will conflict with the ones from the guide.
Click to expand...
Click to collapse
Hi Drastic00,
Thanks very much for replying, by the way your instructons are greatly appreciated for noobs like me! I managed to get the LGflashtool into saying ready and my phone with the S/W screen but it doesn't appear to be updating no progress bar either on the phone or LGflashtool, the lGflashtool just sits at ready. Tried connecting phone holding volume up connecting cable then battery and the other way around as per instructions but still the tool sits at ready. The only bit regarding drivers I struggled with is USB controller it was LGE composit slightly different name to te insructions, also there wan't any port option to change the COM port number to COM41? could this be a reason why LGflashtool wont connect to my phone?
One thing when my phone reboots in the top left corner I get text that says Booti mmc_read 0x4c0e60 not sure what this is could it be something to do with that stopping it updating?
Best Regards
Chimaera500

OYes, it should show up exactly as written. FT will not work unless all that is correct. You probably have LG drivers left from before conflicting with the ones from the guide. Uninstall all things LG, restart pc and reinstall drivers and again restart pc. Read all carefully.
Do all this signed onto pc as admin.

chimaera500 said:
Hi Drastic00,
Thanks very much for replying, by the way your instructons are greatly appreciated for noobs like me! I managed to get the LGflashtool into saying ready and my phone with the S/W screen but it doesn't appear to be updating no progress bar either on the phone or LGflashtool, the lGflashtool just sits at ready. Tried connecting phone holding volume up connecting cable then battery and the other way around as per instructions but still the tool sits at ready. The only bit regarding drivers I struggled with is USB controller it was LGE composit slightly different name to te insructions, also there wan't any port option to change the COM port number to COM41? could this be a reason why LGflashtool wont connect to my phone?
One thing when my phone reboots in the top left corner I get text that says Booti mmc_read 0x4c0e60 not sure what this is could it be something to do with that stopping it updating?
Best Regards
Chimaera500
Click to expand...
Click to collapse
Dear chimaera500,
I think it is a problem of OMPA drivers or LGE Mobile USB serial port selection.
attached guide and files may help you.

YEEE HAAA...it's done!
Managed to flash my phone but slightly different to the instructions, installed drivers as per instructions but still the flashtool just stayed at ready and wouldn't connect. I didn't get the LG port settings to appear and couldn't change the COM port COM41 so I carried on, connected the phone with battery (without holding the volume up button) and then the drivers started installing again and I could see the LG com port and I was able change the settings to COM41 disconnected phone and connected again holding the volume up and the ROM started flashing! did the same for the baseband flash and that worked.
My phone is great now, it's like a new phone now and even connects properly to my car phone kit and downloads the phone book!
Many thanks to Drastic00 and SL_Nuwan for your help and advice keep up the good work!
Many thanks
Chimaera500

Yes, you have to disconnect the phone from pc and connect it again for the LG drivers to install.

Related

Need help installing gb baseband

Ok im on lg thrill,I have all my drivers install,I have the lg,omap,etc installed.I hold the volume button up and plug up the phone,but it does not show the "detected new hardware,I also try the volume up plus power button and still no work,i am on windows xp,Ive been trying to do this for the last couple of days,what am i doing wrong???????
Make sure to double check that you did everything and installed everything as stated in the instruction thread. Run flashtool as admin. If still doesnt work, and this is only way it worked for me, do the power volume up but remove the battery. Thats how i was able to install the baseband after 2 days of trying.
Sent from my LG-P920 using XDA App
Have you removed the sim/micro sd/batery then do it. This is where i got stuck lol soon as i removed them all i just held the power n volume button for like 10 seconds i didnt release them till my pc noticed it
Sent from my LG-P920 using xda premium
so do i install the baseband first or the rom
ssfirme said:
so do i install the baseband first or the rom
Click to expand...
Click to collapse
doesn't matter...
I give up i tried every freaking way and cant get the baseband on this junk
ssfirme said:
I give up i tried every freaking way and cant get the baseband on this junk
Click to expand...
Click to collapse
i just want to share what i did to flash GB baseband.
1. i uninstall everything that smell LG from my computer (pc suite, divx, LG smart world, LG flashtool)
2. install step by step everything from the beginning (except LG pc suite that come from the phone), then i install pc suite (2 file) that come from the tutorial page.
3. follow instructon from the tutorial page.
4. my computer didn't detect omap but LG modem, and when it needs the driver, i take it to omap driver that's been installed before.
5. change port and follow the tutorial.
6. when connecting to computer, first time to make it "ready"
7. second time connecting, i took out batterey first before connecting back to finish the flashing.
8. flashing and stop at 22% (GB "leaked" baseband), restart phone,..and the signal bar finally there.
PS : im using Win XP sp2,..sorry for my bad english
danielkaboom said:
i just want to share what i did to flash GB baseband.
1. i uninstall everything that smell LG from my computer (pc suite, divx, LG smart world, LG flashtool)
2. install step by step everything from the beginning (except LG pc suite that come from the phone), then i install pc suite (2 file) that come from the tutorial page.
3. follow instructon from the tutorial page.
4. my computer didn't detect omap but LG modem, and when it needs the driver, i take it to omap driver that's been installed before.
5. change port and follow the tutorial.
6. when connecting to computer, first time to make it "ready"
7. second time connecting, i took out batterey first before connecting back to finish the flashing.
8. flashing and stop at 22% (GB "leaked" baseband), restart phone,..and the signal bar finally there.
PS : im using Win XP sp2,..sorry for my bad english
Click to expand...
Click to collapse
1. Do i uninstall the lg drivers also?
2. Do you mean the lg flash tool?
i did exactly the same as ssfirme , i found the original instuctions didnt work for me, i think for me the bit that made it work was removing the bettery before connecting it to the computer for a second time as this step isnt in the original instructions

Help needed

hi have been trying to update to 4.0 via flash tool but ive tried everything and cannot get it to work......ive been trying for 3 days and ive pretty much had enough of trying on my own so i though id would ask for help.
ok firstly i am on gb 2.3 im running custom cm7 no probs but i wana take the next step 4.0 so....i have all lg flash tool etc and fast load etc all nessacary files needed but for some reason my phone wont connet and flash its doing my head in. i have it into download mode, battery out etc but after that nothing i cannot progress further its like the program wont connect/register the phone.
im running win7 i even looked into other post and thought this maybe the problem but i have already installed these when gone into download mode as said here If you plug your Phone on PC without battery, OMAP4430 device appeared for seconds and then disappeared in your Windows Device Manager
(check arsen4oo photo guide in post #3)
On windows 7 sometimes OMAP4430 flashes too fast so you cant install driver.
There is a a windows feature that will help you install the driver easier.
To view devices that were once installed but are no longer attached to the computer, open a Command Prompt window using the Run As Administrator option and enter the command:
SET DEVMGR_SHOW_NONPRESENT_DEVICES=1
Then, from the same command prompt, type devmgmt.msc to open Device Manager. Choose View, Show Hidden Devices. The new instance of Device Manager will show “ghosted” entries for devices that were once present. This technique is especially useful for fixing problems caused by leftover drivers after replacing a network card or video card—you can easily delete the ghosted device or update the OMAP4430 driver.e
i just dont know what im doing wrong
cheers in advance
HI,
Please uninstall all LG drivers, and start again. If you are using WIN7, run it with WINXP SP3 compatibility mode.
Getting the Software upgrade screen is tricky, the timing needs ti be just right for the screen to stay, else it blinks and the OMAPP difficulty starts.
You need to listed to the connect disconnect sounds carefully.
Its not difficult, just that the timing needs to be right for the battery to be inserted.
all the best
schubeir
schubeir said:
HI,
Please uninstall all LG drivers, and start again. If you are using WIN7, run it with WINXP SP3 compatibility mode.
Getting the Software upgrade screen is tricky, the timing needs ti be just right for the screen to stay, else it blinks and the OMAPP difficulty starts.
You need to listed to the connect disconnect sounds carefully.
Its not difficult, just that the timing needs to be right for the battery to be inserted.
all the best
schubeir
Click to expand...
Click to collapse
ok so i unistalled all drivers etc done as said but im still doing something wrong.....
1.i have batt out connect phone wait few seconds for it to connect hear a sound connection keep held down till also hear another connection to say all connected etc.(the drivers have installed etc)
2.the screen is blank still battery is out
3.i have installed omap flash, lg flash tool and lg smart flash tool and fastboot and i can get any to work with phone
4.now there is no software update on screen even if i put battery back in phone just stay blank
so thats were i get to so lost.....
cheers in advance
And in FLASH TOOL TUTORIAL there is illustrations of a cable broken down etc do I have to do this to get into download mode and what acctual flash tool do I need to use because there is a few out but tried most but don't work with mine is it to dowith cable? And I have brought new cables etc just in case cheers in advance
Another stupid question but it shouldn't have anything to do with my phone having being rooted and not runngin LG software......I'm so confused with it all as I have tried everything and if it don't work phone can go to someone else lol cheers again
matt2098 said:
Another stupid question but it shouldn't have anything to do with my phone having being rooted and not runngin LG software......I'm so confused with it all as I have tried everything and if it don't work phone can go to someone else lol cheers again
Click to expand...
Click to collapse
Make sure all the drivers from the guide are installed. (including omap driver)
Load the DLL and the rom to lg flashtool.
Listen to the port with LG flashtool's port settings. (One is enough , The icon with a printer cable that's the port settings)
Take the battery out but be ready to plug it back in.
connect the usb cable.
Hold volume up
You're gonna hear sounds from windows in this order ;
1.Connected
2. Disconnected
3. Connected (Again , when you hear this plug the battery back in)
If you did it right then you're now in download mode.
Go to the device manager , find the LG device (I don't remember the name , but there is only one so you'll see it.) and go to properties , advanced and port settings.
Change the port to com41.
Flashtool should take over and start.
For extra guidance , see xbsall's thread ;
http://forum.xda-developers.com/showthread.php?t=1942836
To enter download mode .
Your phone in your hands without anything :-
1- Pull out battery .
2- hold vol+ and keep holding .
3- Connect your phone and you are still holding....
4- Now the phone is connected and you are holding vol+ . Insert battery and keep holding for about 3 seconds . Now the phone in download mode (there are some korean words on the screen) .
That's all
Good Luck
Sent From My P920 (ICS ported)
Hit Thanks Button If I Helped
ok i bloody given up going to use it as a bloody paper weight doing my head in.....no matter what i do i cannot get up software screen in download mode??? i do exactly as stated and still it doesn't want to do it every time blank screen phone will not power on.
with battery in screen blank went through listerning to conect disconnect connect etc do as descriped and now phone is connectected with blank screen as stated i know its connected installed everything.
cheers for the help
http://www.youtube.com/watch?v=zrkHry0gRZw this is excatly what im doing and nothing......
When you're online pm me when you can be online tomorrow.
Sent from my LG-P920 using xda app-developers app
Read the #3 post in this thread :-
http://forum.xda-developers.com/showthread.php?t=1942836
Maybe it will help .
Sent From My P920 (ICS ported)
Hit Thanks Button If I Helped
and works it
mayby this help
http://lg-usb-modem-driver.soft32.com/free-download?rel=center
good luck
ok so further update i can get it into fastboot which has a small lg symbol and says fastboot at the top but still no Korean writing software upgrade screen and in device manager i have lg cosmo come up now. It doesn't have LGE CDMA USB SERIAL PORT this up any more, ive insalled all new driver the lot everything prgressed a little further but stuck again lol cheers for the help so far
u want to flash ported ics im right?
Sent from my LG-P920 using xda app-developers app
OIKk finnally im on software download screen YAY!!!!!!!!!!! but flash tool keeps saying fail and at the top were is says model its say su660 not p920???? which i now have managed to sort so i press start and its says ready and nothing............hasnt done much phone pwers off then back to the begin again cheers again
Because you're flashing the baseband before you flash the ROM. Change the sequence , ROM first then baseband. (Just remove the baseband you added on the flash tool ".fls file" then add it again it's gonna be flashed after the ROM )
Edit : I can help via team viewer if you want.
Sent from my LG-P920 using xda app-developers app
if u read this u should know that u neednt fastboot to flash this ported ics and have to flash bin file first then fls file
and at the thread of first ported ics from xbsa tell u everthing what u use to know to flash this rom
http://forum.xda-developers.com/showthread.php?p=17177547
2nd post is in english
Sent from my LG-P920 using xda app-developers app
its all son confusing as there is so many different guides tutorals etc the only way i can get in software mode is by fast boot i can progress further to here but now im stuck tottaly lol its gets to 27% and stops because of a omap fail???
and all the time ive only been tryig to insatll the rom bin file as of present....not the fls so im now up to here and dont have clue with team viewer lol
Look at your pm
Sent from my LG-P920 using xda app-developers app

[Q] LG Optimus 3d Not Switching On

I have tried several things mentioned on this forum but to know avail. My LG Optimus 3d P920 isnt coming up after i flashed the rom. When i connect to the system on window 7, it shows omap under unknown driver and withing 2secs disappears again. using one of the methods mentioned here, i was able to install the omap driver but each time i connect the phone, it connects and then disconnect instantly. When i tried it on window xp, i got the same error. I can boot into recovery. The phone is not switching ON atall for me to even consider goin to recovery. Sometimes when am on window xp and i press the recovery button with the battery in (vol- plus Power +3d button) it connects and then instantly disconnects again. Please help with a step by step process as am stumped. Am sure i should be able to get it up. Any help will be greatly appreciated
drwale2000 said:
I have tried several things mentioned on this forum but to know avail. My LG Optimus 3d P920 isnt coming up after i flashed the rom. When i connect to the system on window 7, it shows omap under unknown driver and withing 2secs disappears again. using one of the methods mentioned here, i was able to install the omap driver but each time i connect the phone, it connects and then disconnect instantly. When i tried it on window xp, i got the same error. I can boot into recovery. The phone is not switching ON atall for me to even consider goin to recovery. Sometimes when am on window xp and i press the recovery button with the battery in (vol- plus Power +3d button) it connects and then instantly disconnects again. Please help with a step by step process as am stumped. Am sure i should be able to get it up. Any help will be greatly appreciated
Click to expand...
Click to collapse
It's very simple,you must follow this guide if you want GB http://www.xda-developers.com/android/downgrade-the-lg-optimus-3d-to-gingerbread/ or this guide if you want ICS http://www.google.it/url?sa=t&rct=j...2ICoDA&usg=AFQjCNE1Gq5ak_HIJAFcWnsfgrxK6mf9UQ
Enjoy ^^
Still not clear
Darek96 said:
It's very simple,you must follow this guide if you want GB http://www.xda-developers.com/android/downgrade-the-lg-optimus-3d-to-gingerbread/ or this guide if you want ICS http://www.google.it/url?sa=t&rct=j...2ICoDA&usg=AFQjCNE1Gq5ak_HIJAFcWnsfgrxK6mf9UQ
Enjoy ^^
Click to expand...
Click to collapse
Thanks a bunch for your reply, the sad thing is both explanation arent clear enough. Am sorry to bother you but can i get like an idiot guide as both links especially the one with ics isnt really clear enough and the downgrade isnt helping either. downloaded their files yetdont know hw or what to do with em. Please help
Preferrably i will like a guide with downgrading. The links sent has no step by step method,it naturally assumes that one will know what to do with what file. Waiting for ur response.
Thanks again
drwale2000 said:
I have tried several things mentioned on this forum but to know avail. My LG Optimus 3d P920 isnt coming up after i flashed the rom. When i connect to the system on window 7, it shows omap under unknown driver and withing 2secs disappears again. using one of the methods mentioned here, i was able to install the omap driver but each time i connect the phone, it connects and then disconnect instantly. When i tried it on window xp, i got the same error. I can boot into recovery. The phone is not switching ON atall for me to even consider goin to recovery. Sometimes when am on window xp and i press the recovery button with the battery in (vol- plus Power +3d button) it connects and then instantly disconnects again. Please help with a step by step process as am stumped. Am sure i should be able to get it up. Any help will be greatly appreciated
Click to expand...
Click to collapse
Hi,
study carefully and follow step by step
http://forum.xda-developers.com/showthread.php?t=1942836
You will be up and running!!
please click the thanks button if you think I helped
schubeir
Still Stump
schubeir said:
Hi,
study carefully and follow step by step
http://forum.xda-developers.com/showthread.php?t=1942836
You will be up and running!!
please click the thanks button if you think I helped
schubeir
Click to expand...
Click to collapse
I have tried the method you explained step by step bt i got stuckedd on step 13
"Step 13. Run Steps 3-9 again and you will see your phone being flashed from LG FlashTool.
It will be stopped at 26-30% because phone will turn off on its own BUT the next time you try to enter NORMAL DOWNLOAD MODE it will be available again."
When i do what step 12 says, instead of my LG flash tool flashin my fone, the screeen just stay stuck on the download mode with the korean message on it. Dont know how to move ahead. Thanks for your reply, please help me move past this level. In addition, instead of LGE mobile USB serial port, what i have is LGE CDMA USB serial port.
Am still stumped
drwale2000 said:
I have tried the method you explained step by step bt i got stuckedd on step 13
"Step 13. Run Steps 3-9 again and you will see your phone being flashed from LG FlashTool.
It will be stopped at 26-30% because phone will turn off on its own BUT the next time you try to enter NORMAL DOWNLOAD MODE it will be available again."
When i do what step 12 says, instead of my LG flash tool flashin my fone, the screeen just stay stuck on the download mode with the korean message on it. Dont know how to move ahead. Thanks for your reply, please help me move past this level. In addition, instead of LGE mobile USB serial port, what i have is LGE CDMA USB serial port.
Click to expand...
Click to collapse
Somebody pls help me, i am able to get into the download mode but cant get beyond that stage. I have tried LG flashtool several time to get it fixed bt LG Flashtool is discovering my phone. Even when i click start though its suppose to start automatically, it just doesnt do anything. Or could it be because under my device manager i have LGE CDMA USB serial port instead of LGE mobile USD serial port ? because its my LGE CDMA USB serial port that i turned its port to 41
I need help please
drwale2000 said:
Somebody pls help me, i am able to get into the download mode but cant get beyond that stage. I have tried LG flashtool several time to get it fixed bt LG Flashtool is discovering my phone. Even when i click start though its suppose to start automatically, it just doesnt do anything. Or could it be because under my device manager i have LGE CDMA USB serial port instead of LGE mobile USD serial port ? because its my LGE CDMA USB serial port that i turned its port to 41
I need help please
Click to expand...
Click to collapse
you are absolutely right, that guide of how to flash ICS ported is not so clear enough for noob like us to fallow.
Fallow this guide. i hope it will help you, because it has saved my but for many times. i hope it will do the same for you.
http://www.technopat.net/forum/andr...lg-optimus-3d-ultimate-flash-guide-print.html
drwale2000 said:
Thanks a bunch for your reply, the sad thing is both explanation arent clear enough. Am sorry to bother you but can i get like an idiot guide as both links especially the one with ics isnt really clear enough and the downgrade isnt helping either. downloaded their files yetdont know hw or what to do with em. Please help
Preferrably i will like a guide with downgrading. The links sent has no step by step method,it naturally assumes that one will know what to do with what file. Waiting for ur response.
Thanks again
Click to expand...
Click to collapse
Okay,i will write a small guide
1-Download all the files in the downgrading package
2-Install LG FlashTool
3-Go on the FlashTool directory and change the standard icon with the modified one in the folder
4-Now install all the drivers in the package,if the install fail,uninstall all the lg drivers and do the procedure again
5-Now keep pressing volume UP and connect your phone to the computer
6-On the computer press start and search device manager
7-Open it and search COM Ports and change the LGE etc.. Port to COM41
8-Now you are done to do the procedure,so open LG FlashTool as administrator
9-Will appear a window with the files to put in,select BOOT21E.CP and BOOT21.AP,and select USB Mode
10-Now press ok and connect the phone to your pc pressing Volume UP
11-Go on the icon of ports(looks like a usb port) and select only port 1
12-Now press Start(the yellow arrow)
13-Now disconnect your phone and connect it,without pressing any button
14-The downgrade procedure will start automatically,so keep calm and...Enjoy!
progress but not complete
Darek96 said:
Okay,i will write a small guide
1-Download all the files in the downgrading package
2-Install LG FlashTool
3-Go on the FlashTool directory and change the standard icon with the modified one in the folder
4-Now install all the drivers in the package,if the install fail,uninstall all the lg drivers and do the procedure again
5-Now keep pressing volume UP and connect your phone to the computer
6-On the computer press start and search device manager
7-Open it and search COM Ports and change the LGE etc.. Port to COM41
8-Now you are done to do the procedure,so open LG FlashTool as administrator
9-Will appear a window with the files to put in,select BOOT21E.CP and BOOT21.AP,and select USB Mode
10-Now press ok and connect the phone to your pc pressing Volume UP
11-Go on the icon of ports(looks like a usb port) and select only port 1
12-Now press Start(the yellow arrow)
13-Now disconnect your phone and connect it,without pressing any button
14-The downgrade procedure will start automatically,so keep calm and...Enjoy!
Click to expand...
Click to collapse
Thanks a bunch, i have finally gotten a lil hang of it. The problem now is each time i flash with LG flash tool, once it gets to 82%, the part where the flashtool reads target resetting , my fone disconnects and the LG flashtool brings out this error error_wm_progress_msg and some others. I have tried this 3times now and the error remains the same. When i power the phone, it goes in to clockwod mode and when i try to mount usb, it doesnt do. Even when i try to restore the backup i have, it says md5 error. Waiting for your reply
drwale2000 said:
Thanks a bunch, i have finally gotten a lil hang of it. The problem now is each time i flash with LG flash tool, once it gets to 82%, the part where the flashtool reads target resetting , my fone disconnects and the LG flashtool brings out this error error_wm_progress_msg and some others. I have tried this 3times now and the error remains the same. When i power the phone, it goes in to clockwod mode and when i try to mount usb, it doesnt do. Even when i try to restore the backup i have, it says md5 error. Waiting for your reply
Click to expand...
Click to collapse
That s mean your phone is successfully done flashing , with me it never come to 100% it always on 82% its finish, just reboot your phone and wait for it to start on , and you are good to go, now go to recovery and format, or wipe cache and data and reboot at first time it says that you don't have enough memory left just go to privacy and reset the phone and format everything . and i think everything will be good after that. good luck.
Thanks
:good:
bensmokie said:
That s mean your phone is successfully done flashing , with me it never come to 100% it always on 82% its finish, just reboot your phone and wait for it to start on , and you are good to go, now go to recovery and format, or wipe cache and data and reboot at first time it says that you don't have enough memory left just go to privacy and reset the phone and format everything . and i think everything will be good after that. good luck.
Click to expand...
Click to collapse
Was just bout to tell u its now working. Thanks a million. U saved me buying another phone. By the way i want to flash the new jellybam on it.Any help how to go about it cus the last time i tried, the jellybam keeps hanging, or automatically shutdown. I have to remove the battery to start it again.
Thanks
drwale2000 said:
:good:
Was just bout to tell u its now working. Thanks a million. U saved me buying another phone. By the way i want to flash the new jellybam on it.Any help how to go about it cus the last time i tried, the jellybam keeps hanging, or automatically shutdown. I have to remove the battery to start it again.
Thanks
Click to expand...
Click to collapse
The truth is your phone can not be break just with flashing, it will brick though, unless your hardware is damaged, then you are think to buy new phone.
well about the JellyBam, while you are on GB now, root your phone and install Rom manager flash Bernie's file and you're out of the rebooting. the Barnie's files is the key of JellyBam or other CM10 to work. good luck.
Thanks
bensmokie said:
The truth is your phone can not be break just with flashing, it will brick though, unless your hardware is damaged, then you are think to buy new phone.
well about the JellyBam, while you are on GB now, root your phone and install Rom manager flash Bernie's file and you're out of the rebooting. the Barnie's files is the key of JellyBam or other CM10 to work. good luck.
Click to expand...
Click to collapse
Thanks for the prompt reply, i just noticed that my phone isnt detecting my sim card. Its not showing any network, i just finished installing 3d kongdom rom on it but its not showing network signal. Any help on how to fix that then can u point me to a page where i can follow the instruction of how to install the jellybam cus ijust did and its still giving the same error i mentioned earlier. I luv the interface but importantly, i will love to have network signal back on my fone
drwale2000 said:
Thanks for the prompt reply, i just noticed that my phone isnt detecting my sim card. Its not showing any network, i just finished installing 3d kongdom rom on it but its not showing network signal. Any help on how to fix that then can u point me to a page where i can follow the instruction of how to install the jellybam cus ijust did and its still giving the same error i mentioned earlier. I luv the interface but importantly, i will love to have network signal back on my fone
Click to expand...
Click to collapse
fallow this one it work for JellyBam too. http://forum.xda-developers.com/showthread.php?t=2083013
but don't forget to flash berni's files ,here : http://forum.xda-developers.com/showthread.php?p=35199371]
because if not you will not have the network signal again and it will keep rebooting.
but if i could suggest you Just suggestion . you to flash ICS first to see how is it. i love CM10 too and smoothness of it you can't resist, but it has lotta bugs for now so to avoid all that you should starting using the ICS ported by Xbsall, it work very fine.
U are a life saver
bensmokie said:
fallow this one it work for JellyBam too. http://forum.xda-developers.com/showthread.php?t=2083013
but don't forget to flash berni's files ,here : http://forum.xda-developers.com/showthread.php?p=35199371]
because if not you will not have the network signal again and it will keep rebooting.
but if i could suggest you Just suggestion . you to flash ICS first to see how is it. i love CM10 too and smoothness of it you can't resist, but it has lotta bugs for now so to avoid all that you should starting using the ICS ported by Xbsall, it work very fine.
Click to expand...
Click to collapse
Thanks again for the response. I am goin to have to go with ur advise, Please send me a link to ics rom wit a guide,if possible help me right it out step by step cus the one u did earlier was just amazing. I shall install ICs. please send me the links.
Thanks
drwale2000 said:
Thanks again for the response. I am goin to have to go with ur advise, Please send me a link to ics rom wit a guide,if possible help me right it out step by step cus the one u did earlier was just amazing. I shall install ICs. please send me the links.
Thanks
Click to expand...
Click to collapse
First of all you will need this here: http://www.technopat.net/forum/andr...lg-optimus-3d-ultimate-flash-guide-print.html
Download the ICS ported ,thank you Xbsall for this awesome job, without you, none will have ICS running to their device p920.
download only ROM file XBSA404.rar. here: http://forum.xda-developers.com/showthread.php?t=1956347
once you download it, the extract it in one new folder on ur desktop that way it will easy to find .
Well Start Lg flash tool, and flash both file as you did before , i mean in this way: http://www.technopat.net/forum/andr...lg-optimus-3d-ultimate-flash-guide-print.html
once done you are on ICS.
Root it this way: http://forum.xda-developers.com/showthread.php?t=1905116
Or this way : http://forum.xda-developers.com/showpost.php?p=31963526&postcount=532
they both work for me.
once u done that you need to flash twrp or Cwm.
you in here. http://forum.xda-developers.com/showthread.php?t=1978543
Then you can flash this if you want : http://forum.xda-developers.com/showthread.php?t=1963847
i wish you good luck!
those are the guide that i used, and they did really god job for me, hope they will do the same for you!:good:
I cant download root software
bensmokie said:
First of all you will need this here: http://www.technopat.net/forum/andr...lg-optimus-3d-ultimate-flash-guide-print.html
Download the ICS ported ,thank you Xbsall for this awesome job, without you, none will have ICS running to their device p920.
download only ROM file XBSA404.rar. here: http://forum.xda-developers.com/showthread.php?t=1956347
once you download it, the extract it in one new folder on ur desktop that way it will easy to find .
Well Start Lg flash tool, and flash both file as you did before , i mean in this way: http://www.technopat.net/forum/andr...lg-optimus-3d-ultimate-flash-guide-print.html
once done you are on ICS.
Root it this way: http://forum.xda-developers.com/showthread.php?t=1905116
Or this way : http://forum.xda-developers.com/showpost.php?p=31963526&postcount=532
they both work for me.
once u done that you need to flash twrp or Cwm.
you in here. http://forum.xda-developers.com/showthread.php?t=1978543
Then you can flash this if you want : http://forum.xda-developers.com/showthread.php?t=1963847
i wish you good luck!
those are the guide that i used, and they did really god job for me, hope they will do the same for you!:good:
Click to expand...
Click to collapse
Tanks buddy for all your help. I now have ICS on my phone but its not rooted yet. I tried downloading from one of the links you sent me but the file wasnt there anymore.After reading all comment, i found a page but the problem is my system has been having difficulties downloading from upload.com Its been an issue a very long time ago.Both my systems. Could you help me with a different link pls so i can root it. In additon, my back button is acting like cancel button,instead of taking me back, it takes me home, howcan i fix that
drwale2000 said:
Tanks buddy for all your help. I now have ICS on my phone but its not rooted yet. I tried downloading from one of the links you sent me but the file wasnt there anymore.After reading all comment, i found a page but the problem is my system has been having difficulties downloading from upload.com Its been an issue a very long time ago.Both my systems. Could you help me with a different link pls so i can root it. In additon, my back button is acting like cancel button,instead of taking me back, it takes me home, howcan i fix that
Click to expand...
Click to collapse
Guy,in the ICS OS of LG Optimus 3D,the search button acts as back button and the back button acts as home button,and the camera is upside-down..you can fix only the camera,search on forum,there are many guides
Thanks darek
Darek96 said:
Guy,in the ICS OS of LG Optimus 3D,the search button acts as back button and the back button acts as home button,and the camera is upside-down..you can fix only the camera,search on forum,there are many guides
Click to expand...
Click to collapse
Thanks darek for the info, i found out some hours ago too. Its a pain in the bud. I dont mind the camera bt the search and back button i do mind. Is there a way to go bout that, if not is there any other ics rom that i can try because i doubt i can use this. Pls reply asap
drwale2000 said:
Thanks darek for the info, i found out some hours ago too. Its a pain in the bud. I dont mind the camera bt the search and back button i do mind. Is there a way to go bout that, if not is there any other ics rom that i can try because i doubt i can use this. Pls reply asap
Click to expand...
Click to collapse
For the question of buttons,is only a habit question
No one rom with ICS can solve this problem,so accept it xD

[Q] LG optimus 3d p925g bricked

I've looked at the similar threads , to be honest even if one of the suggestions might work , none of the people seem to have the same problem from my understanding.
So apologize ahead of time as i imagine someone has bricked in a similar fashion in some thread buried somewhere.
But have an unlocked P925g lg optimus 3d, got a few days ago.
Last night i rooted just fine , root checker says it was rooted properly.
Then i installed rom manager as i was following manbearpigs post.
When i got to flash clockwork mod , i clicked the button and it looked like it was doing some flashing , but the phone turned off to reboot??
and now when i power on the lg logo appears and then the screen goes funny.
If i try to hold the power down and 3d button , i get a green screen . However i'm very unsure of what to do next.
However when i plug into usb the phone goes black , refuses to turn back on until i take the battery out.
I'd pay someone here if i could , but i'll take any help i can get.
Appreciate any help.
I don't KNOW, but just an idea:
May be your phone is stuck in download mode?
With this latest ICS (original, not ported) my phone shows black screen when in download mode (no message SW UPDATE and something in Korean).
Did you try to plug your phone to PC? Does your comp see it?
From what I read flashing wrong CWM might cause problems...
Also try to read Ressurection thread by xbsa, it helped me couple times
Don't give up!
Sent from my LG-P920 using xda app-developers app
My computer does see the phone if i take the battery out , and push the volume down while it connects. However when it connects , it cannot find drivers that it find originally.
I'd be happy just to have the phone back to froyo right now , however i am not giving up , just asking for advice. Will reply once i look at the resurrection post you suggested.
odanhammer said:
My computer does see the phone if i take the battery out , and push the volume down while it connects. However when it connects , it cannot find drivers that it find originally.
I'd be happy just to have the phone back to froyo right now , however i am not giving up , just asking for advice. Will reply once i look at the resurrection post you suggested.
Click to expand...
Click to collapse
just try the LG flash tool to flash without reinstalling drivers, if it doesn't flash you have to uninstall all LG drivers, reboot your computer, install again LG drivers and flash Bin files using Flash tool, you don't have to flash Bin and fls files at the same time, first Bin file, if there is no network close LG flash, open it again and flash Fls at second time to get the right baseband (sometimes it not necessery to flash this fls files)
or just follow this guide
http://www.technopat.net/forum/android-telefonlari/9128-lg-optimus-3d-ultimate-flash-guide.html
odanhammer said:
My computer does see the phone if i take the battery out , and push the volume down while it connects. However when it connects , it cannot find drivers that it find originally.
I'd be happy just to have the phone back to froyo right now , however i am not giving up , just asking for advice. Will reply once i look at the resurrection post you suggested.
Click to expand...
Click to collapse
To get to download mode you need to keep battery in, remove sim and SD card. Hold vol+ and plug USB cable. You should see message SW UPDATE and some Korean. My phone now doesn't show it, just blank screen. But LG Flash sees it and u can flash bin fls.
Sent from my LG-P920 using xda app-developers app
Remove drivers and use the LGMobile Support Tool to install the drivers, if your phone is connected it should detect it and finish the install process. I believe the P925G is a Rogers device? You might have to select Rogers as your carrier to find the drivers.
Android1993 said:
Remove drivers and use the LGMobile Support Tool to install the drivers, if your phone is connected it should detect it and finish the install process. I believe the P925G is a Rogers device? You might have to select Rogers as your carrier to find the drivers.
Click to expand...
Click to collapse
ok so i've deleted all lg related material from my computer, when i connected the phone to the computer with battery in , nothing happens.
Without battery , it detects automatically , then it continues a loop of picking it up and dropping off .
So i moved to my laptop , attempted to follow the guide kupuku posted, however after getting the went logo on the phone , it never gets past that stage no matter what i do.
I've also tried LG support tool , it doesn't detect my phone on either my computer or laptop , even after installing/reinstalling the proper drivers.
LG does have a live chat which isn't open and the phone number can not be reached from my area.. i imagine its a 1800 number for asia or something as i do live in Canada.
My only other choice is to take the phone down to a guy that can get it out of boot loop for close to what i paided for the phone a few days ago.
Least to say , that option is something i want to do , nor can i afford to do.
once again i apprecaite the help that has been given , and for any that will be given.
edit:
Ok so i got lg mobile support to work by doing recovery and entering my imei number. Its currently at 4% but its been close to an hour and a half. Might restart and see if that works , but my phone is doing the logo boot repeat pattern still , even during this update. so not sure what exactly is happening.

Need help - Bricked O3D

Hi,
I tried to restore my IMEI and official ICS versions using the official LG Tools, but at about 97% the phone restarted and now it only shows the LG logo for 1 sec then it shuts down. I can't charge it, the computer doens't read the OMAP drivers...it is blinking in the device manager and that's all. I have followed the guides from the Unbrick section but no work.
Please help me..I really need to revive the darn brick
Thanks.
You have to force the driver to link as in part 1.f.4.1 to 1.f.4.5 here.
http://forum.xda-developers.com/showthread.php?p=39269819
Then proceed with the unbricking or imei recover.
drastic00 said:
You have to force the driver to link as in part 1.f.4.1 to 1.f.4.5 here.
http://forum.xda-developers.com/showthread.php?p=39269819
Then proceed with the unbricking or imei recover.
Click to expand...
Click to collapse
I was doing that, but when I uninstall the TI Board thing, it dissapears for a second and then reappears again, as TI Board. I can't make it stay on Other Devices list...
Nightfallen said:
I was doing that, but when I uninstall the TI Board thing, it dissapears for a second and then reappears again, as TI Board. I can't make it stay on Other Devices list...
Click to expand...
Click to collapse
Run a cmd as an admin and type :" SET DEVMGR_SHOW_NONPRESENT_DEVICES=1 " and press enter, then type :" devmgmt.msc " and press enter. Choose View, Show Hidden Devices, you will see your device
It doesn't need to stay there. Catch it in other devices. Point omap4430 to the driver file and force install it as described. Let it install a minute. Disconnect phone and reconnect. Then after a bit it should stay connected but under TI boards this time. Then you can do resurrection or whatever else. Depending on what you are doing you might also need the LG drivers but check whatever tutorial you are following.
Or you can run the command Karim described to stop the blinking. But you will still need to link the driver whether omap4430 is blinking or not.
drastic00 said:
It doesn't need to stay there. Catch it in other devices. Point omap4430 to the driver file and force install it as described. Let it install a minute. Disconnect phone and reconnect. Then after a bit it should stay connected but under TI boards this time. Then you can do resurrection or whatever else. Depending on what you are doing you might also need the LG drivers but check whatever tutorial you are following.
Or you can run the command Karim described to stop the blinking. But you will still need to link the driver whether omap4430 is blinking or not.
Click to expand...
Click to collapse
It doesn't stay connected even under TI Boards, even if I install the drivers as in that tutorial. It just blinking and blinking over and over again, and the sound that windows is making when connecting and disconnecting a USB device. I can't enter any other mode the only way the PC sees it "alive" is with the "Volume and plug-in" thing. If I try to make it start under with other methods it is just showing the LG logo for about 1 sec and then it powers down. Is it really, but really dead ?
It's not dead. You have bootloop. Once you fix that then you can fix imei, if that is really the problem. Probably you mistakenly flashed a bootloader incompatible with the kernel you have.
Download the bag of goodies in link section. Then start at beginning of step 1. Be sure to read everything carefully. Once you have step 1 done correctly you can continue with flashing the .bin with LG Flash Tool.
Since I don't know what you did exactly, I don't know what exactly to do to fix the problem. But, one way is to flash ICS again. If you are not familiar with fastboot and bootloaders, I would suggest that. Using Fastboot requires some understanding of what the problem is. Since I gather you don't know, reflashing is one way to get the phone running.
After that, if your imei is not fixed in the process, then that can be done later.
drastic00 said:
It's not dead. You have bootloop. Once you fix that then you can fix imei, if that is really the problem. Probably you mistakenly flashed a bootloader incompatible with the kernel you have.
Download the bag of goodies in link section. Then start at beginning of step 1. Be sure to read everything carefully. Once you have step 1 done correctly you can continue with flashing the .bin with LG Flash Tool.
Since I don't know what you did exactly, I don't know what exactly to do to fix the problem. But, one way is to flash ICS again. If you are not familiar with fastboot and bootloaders, I would suggest that. Using Fastboot requires some understanding of what the problem is. Since I gather you don't know, reflashing is one way to get the phone running.
After that, if your imei is not fixed in the process, then that can be done later.
Click to expand...
Click to collapse
How I bricked my O3D. Simple.. using the f**kin LG Official Update Software >.<' . I let it run and at about 98% the phone restarted and never gone up again. I don't care if I loose all the crap inside my phone, since I got really nothing on it. Just a few games. I just want to make it run again..
So, I've connected my phone with my USB cable while pressing Volume+. OMAP4430 appears only as a TI Board and flashing all the way until I disconnect my phone. When I install the OMAP drives as in that guide, it gives me an error that it can't install it (or in most cases no error) and the blinking thingy is still there. Do I need to use a modified USB cable to do this ? Like P999 910k ? I am really noob, since I bought my phone yesterday from a friend, and tried to restore it's IMEI by flashing the phone again. Yes, I know, I`m dumb xD
If it is a sync cable you should be fine with that.
If omap4430 is blinking you missed something. Driver install can be tricky if you have not done it before. Hell, it's tricky if you have done it.
Just take your time with that, read carefully, don't miss anything, and be sure all things like Defender, antivirus, etc are disabled before downloading, unzipping, unraring and all that.
Once that's done you'll be set up to flash or anything else.
I can't speak to LG Update Tool because I don't use it.
drastic00 said:
If it is a sync cable you should be fine with that.
If omap4430 is blinking you missed something. Driver install can be tricky if you have not done it before. Hell, it's tricky if you have done it.
Just take your time with that, read carefully, don't miss anything, and be sure all things like Defender, antivirus, etc are disabled before downloading, unzipping, unraring and all that.
Once that's done you'll be set up to flash or anything else.
I can't speak to LG Update Tool because I don't use it.
Click to expand...
Click to collapse
I finally managed to make the omap4430 work, i reinstalled a new firmware , the v30a one using emergency mode, the phone is starting up but it's freezing. Why ? Is there any difference between v30A and B or v28 ones ? Is there any chance for v28 to work ? Because the update takes up to 6hrs >.<
Nightfallen said:
I finally managed to make the omap4430 work, i reinstalled a new firmware , the v30a one using emergency mode, the phone is starting up but it's freezing. Why ? Is there any difference between v30A and B or v28 ones ? Is there any chance for v28 to work ? Because the update takes up to 6hrs >.<
Click to expand...
Click to collapse
Why don't you flash bootv21e which will fix all problems then flash ICS ?
Karim Kahale said:
Why don't you flash bootv21e which will fix all problems then flash ICS ?
Click to expand...
Click to collapse
Q1: Where can I find that firmware ? I want to flash an official one, and then upgrade to ics again, the official one.
I only managed to find the v30A on the internet.
Q2: Is there any difference between v30 and v28 ?
Q3: That firmware you have specified is Gingerbread, right ? I heared there are some problems when upgrading to ics from gb. V21e solve them all ?
Nightfallen said:
Q1: Where can I find that firmware ? I want to flash an official one, and then upgrade to ics again, the official one.
I only managed to find the v30A on the internet.
Q2: Is there any difference between v30 and v28 ?
Q3: That firmware you have specified is Gingerbread, right ? I heared there are some problems when upgrading to ics from gb. V21e solve them all ?
Click to expand...
Click to collapse
Here is the link http://d-h.st/RC5 .
Bootv28 is probably the leaked beta version of ICS.
Based on what I experienced, after flashing bootv21e, I never had any problem upgrading to ics.
Good Luck !
Karim Kahale said:
Here is the link http://d-h.st/RC5 .
Bootv28 is probably the leaked beta version of ICS.
Based on what I experienced, after flashing bootv21e, I never had any problem upgrading to ics.
Good Luck !
Click to expand...
Click to collapse
To install this, I need to enter recovery mode, and flash it from SD card ?
Nightfallen said:
To install this, I need to enter recovery mode, and flash it from SD card ?
Click to expand...
Click to collapse
No, you must flash this ROM with smartflash or either LG flashtool into download mode.
Karim Kahale said:
No, you must flash this ROM with smartflash or either LG flashtool into download mode.
Click to expand...
Click to collapse
Any special cable required ? I only have the "sync" one. Not the 910k resistor on it.
Nightfallen said:
Hi,
I tried to restore my IMEI and official ICS versions using the official LG Tools, but at about 97% the phone restarted and now it only shows the LG logo for 1 sec then it shuts down. I can't charge it, the computer doens't read the OMAP drivers...it is blinking in the device manager and that's all. I have followed the guides from the Unbrick section but no work.
Please help me..I really need to revive the darn brick
Thanks.
Click to expand...
Click to collapse
used LG FlashTool
Optimus 3D for P920-P925
http://forum.xda-developers.com/showthread.php?t=1244490
What's your phone model?
different for the P720-P725 (3D MAX)
Nightfallen said:
Any special cable required ? I only have the "sync" one. Not the 910k resistor on it.
Click to expand...
Click to collapse
I think that resistor mod is for making a sync cable from a cheap charge cable, but I am not sure (the post first I saw about that was in a language I can't read, so I don't know why that was started). My generic sync cable works fine, so it should be OK.
onlyonehpx said:
used LG FlashTool
Optimus 3D for P920-P925
http://forum.xda-developers.com/showthread.php?t=1244490
What's your phone model?
different for the P720-P725 (3D MAX)
Click to expand...
Click to collapse
My phone is p920.
drastic00 said:
I think that resistor mod is for making a sync cable from a cheap charge cable, but I am not sure (the post first I saw about that was in a language I can't read, so I don't know why that was started). My generic sync cable works fine, so it should be OK.
Click to expand...
Click to collapse
I heared that if you're not using the 910k resistor on that cable, you won't be able to flash it without errors, or something... That also said a guy from a authorised-service in my town. He said that he needs to modify a USB cable in order to flash it. He flashed it finally with the v30a fw, but the phone is freezing after startup. Maybe I could help him somehow to repair my phone. Tomorrow I`ll go again to the service to see if he managed to get the phone working using v28 or v21. The updates takes a serios ammount of time. The last update to v30a took him about 5hrs...

Categories

Resources