Database Info

How to get back from Custom rom to stock rom in few steps

Hello all,
first of all sry 4 my bad english...
I´ve read a lot of threads about unbrick / restore stock rom, but tbh with you there is a much easyier way to get back to a stock rom.. U dont even need win xp. I tried it with win 7 64 bit and it workd perfect. I went back from Waterbear v1.0 to v10D without any problmes. Also you can unbrick your phone ( with a some luck )
Here we go.. What u need :
1. lg BC2AppSetup. exe from lg.com
2. lg mobile update
3. nothing more
ok now do this:
!!!!turn off storage mode in settings and turn on Usb Debug
1. Install bc2appsetup
2. run lg mobile update
(If this is ur first time using lg mobile update .. if not go ahead to step 5 )
3. Connect your phone to your pc so lg mobile is able to recognize it ( some driver will be installed, let your pc finish with that )
4.disconnect your phone from your pc and let lg mobile run, dont close it!
5. turn off your phone ( no need to remove batt or something like that, just let it turnt off ) and connect it to your pc again.
6. now wait for the batt loading symbol on your o3d.
7. while you can see the batt loading symbol press vol-up + power on for about 6 sec.. your device turns off and you can see some driver installed on your pc. ( there can be a popoff with missing omap4430 driver.. no problem just ignore it )
8. After installing the driver to your pc you have to press again vol-up+power on for about 6 sec. Have a eye on your lg mobile update during pressing the vol-up+power on button because u will see lg mobile is recognizing your device.. As soon u see that u can stop pressing vol-up+power on. Notice my screen didnt went on during this procedure.. But it works perfekt!
9. Now that lg mobile have recognize your device you can see that lg mobile update cant say what rom is installed and this is good! Because now you can just press s/w upgrade and it will upgrade(restore) to the newest stock rom.
You dont even lose your data..you keep everything but i recommend to do a factory reset in settings after all .
You will lose Root, superuser, cwm but you can get it back in few minutes without any problems.
P.s. As i said there are a lot of threads about reflashing stock rom but they are all much much to complicated. A lot of steps they say you dont even need as you can see here..

Will this remove. CLOCK WORK RECOVERY?
THANKS.

[Q] think i bricked it good and proper

ok i need help please , i had gbread on it and installed superoneclick to get root then tried to flash cwm with vipermod. message said out of storage space or something (dont have ext mem only internal)and now phone will not turn on.
have followed this guide http://forum.xda-developers.com/showthread.php?t=1244490 and phone was recognised by omapp but couldnt change the port in device manager and couldnt find a bin to download so i tried to flash a kdz v21a
clicked start on lgflasher but nothing happened so after about 5 mins i cancelled it thinking without the port change it was a waste of time.
now i cant even get omapp to flash up when i connect phone . device manager refreshes but i cant see anything change .
hope thats enough info for some kind person to help.
many thanks in advance
marty

Try this start on step 3 its in the thrill forum but they are the same phone http://forum.xda-developers.com/showthread.php?t=1491870
sent from my acidhazard thrill

marty41 said:
...then tried to flash cwm with vipermod...
marty
Click to expand...
Click to collapse
Where did you get vipermod from? The Transformer Prime forums? That's meant for the TFP and would not have worked with the O3D since it flashes to mmcblk0p4 rather than mmcblk0p. You should have used the flasher here.
Download this, this and this. Extract smartflash.zip, install both driver packages. Then, run Windows Enabler, in the notifications bar, click it and make sure it is set to 'on'.
Now remove your phone's battery and sim card, press volume up and connect your phone to the computer. Hold volume up until it is detected by the computer. It should take no longer than 20 seconds.
Now run B_SmartFlashTool_Extern.exe, go to rom copy d/l, select LGP920_CP.fls for CP bin and LGP920_AP.bin for AP bin. Make sure under communications setup that your phone is connected (verify the com port in device manager) and then click start. If all goes well, you'll have a stock v21D phone again

Thanks for the help guys but i'm not getting a com port when i connect the phone so i don't think i can use any of those methods . or can i
i want to go back to the beginning and see if omapp will detect phone and install drivers but i can uninstall the installer but dont think that will remove the drivers , does anyone know how to do that.(cos i think i messed that bit up )
thanks again
marty
vipermod , i think i followed a link somewhere in the o3d forum where someone said u could use it to flash cwm

so , i uninstalled all lg drivers uninstalled omap installer searched registry for for any mention of omap and deleted (some wouldnt delete ) .
restarted computer (xp by the way )
then installed omap installer and lg drivers and connected phone holding vol up
and................. NOTHING whereas yesterday i had a little icon in the task bar and the opportunity to install omap drivers.
conclusion , phone is dead , i had an oppurtunity to fix it yesterday and i blew it
hope someone tells me i'm wrong but its not looking good
marty

take off battery and just put your usb cable and tell us if it shows omap in your device manager
dont press keys

if i connect phone without battery device manager just refreshes a couple of times but nothing changes with regards to ports doesn't matter if i have vol+ button in power button in or nothing
thanks anyway
marty

am i getting somewhere
update : ok so i'm on a clean install of xp and i connected the phone with vol+ and it wants to install omap4430 drivers. is that good news?
i installed omapinstaller , then the 2 lg drivers ca and ma , then reconnected the phone and went thro omap driver install but still don't have any ports in device manager
is there no way i can force it to flash without it having to think it is connected cause if its recognising it as omap4430 there must be something there
don't want to give up on it too easy , if only i put this much effort into it whilst it was working lol
marty

evening all . new update
tonight i've installed the lg support tool and drivers and found that if i leave my phone connected i occasionally get "TI sample boards" popping up in device manager for a couple of seconds without having to press buttons , unfortunately it doesn't stay on for any longer with buttons pressed.
i was wondering how to force install the "LG CDMA composite usb device " drivers cos its never asking for them as it should according to the tutorial
hope someone can help cos i've seen a few threads with same problem as me
marty

Help needed

hi have been trying to update to 4.0 via flash tool but ive tried everything and cannot get it to work......ive been trying for 3 days and ive pretty much had enough of trying on my own so i though id would ask for help.
ok firstly i am on gb 2.3 im running custom cm7 no probs but i wana take the next step 4.0 so....i have all lg flash tool etc and fast load etc all nessacary files needed but for some reason my phone wont connet and flash its doing my head in. i have it into download mode, battery out etc but after that nothing i cannot progress further its like the program wont connect/register the phone.
im running win7 i even looked into other post and thought this maybe the problem but i have already installed these when gone into download mode as said here If you plug your Phone on PC without battery, OMAP4430 device appeared for seconds and then disappeared in your Windows Device Manager
(check arsen4oo photo guide in post #3)
On windows 7 sometimes OMAP4430 flashes too fast so you cant install driver.
There is a a windows feature that will help you install the driver easier.
To view devices that were once installed but are no longer attached to the computer, open a Command Prompt window using the Run As Administrator option and enter the command:
SET DEVMGR_SHOW_NONPRESENT_DEVICES=1
Then, from the same command prompt, type devmgmt.msc to open Device Manager. Choose View, Show Hidden Devices. The new instance of Device Manager will show “ghosted” entries for devices that were once present. This technique is especially useful for fixing problems caused by leftover drivers after replacing a network card or video card—you can easily delete the ghosted device or update the OMAP4430 driver.e
i just dont know what im doing wrong
cheers in advance

HI,
Please uninstall all LG drivers, and start again. If you are using WIN7, run it with WINXP SP3 compatibility mode.
Getting the Software upgrade screen is tricky, the timing needs ti be just right for the screen to stay, else it blinks and the OMAPP difficulty starts.
You need to listed to the connect disconnect sounds carefully.
Its not difficult, just that the timing needs to be right for the battery to be inserted.
all the best
schubeir

schubeir said:
HI,
Please uninstall all LG drivers, and start again. If you are using WIN7, run it with WINXP SP3 compatibility mode.
Getting the Software upgrade screen is tricky, the timing needs ti be just right for the screen to stay, else it blinks and the OMAPP difficulty starts.
You need to listed to the connect disconnect sounds carefully.
Its not difficult, just that the timing needs to be right for the battery to be inserted.
all the best
schubeir
Click to expand...
Click to collapse
ok so i unistalled all drivers etc done as said but im still doing something wrong.....
1.i have batt out connect phone wait few seconds for it to connect hear a sound connection keep held down till also hear another connection to say all connected etc.(the drivers have installed etc)
2.the screen is blank still battery is out
3.i have installed omap flash, lg flash tool and lg smart flash tool and fastboot and i can get any to work with phone
4.now there is no software update on screen even if i put battery back in phone just stay blank
so thats were i get to so lost.....
cheers in advance

And in FLASH TOOL TUTORIAL there is illustrations of a cable broken down etc do I have to do this to get into download mode and what acctual flash tool do I need to use because there is a few out but tried most but don't work with mine is it to dowith cable? And I have brought new cables etc just in case cheers in advance

Another stupid question but it shouldn't have anything to do with my phone having being rooted and not runngin LG software......I'm so confused with it all as I have tried everything and if it don't work phone can go to someone else lol cheers again

matt2098 said:
Another stupid question but it shouldn't have anything to do with my phone having being rooted and not runngin LG software......I'm so confused with it all as I have tried everything and if it don't work phone can go to someone else lol cheers again
Click to expand...
Click to collapse
Make sure all the drivers from the guide are installed. (including omap driver)
Load the DLL and the rom to lg flashtool.
Listen to the port with LG flashtool's port settings. (One is enough , The icon with a printer cable that's the port settings)
Take the battery out but be ready to plug it back in.
connect the usb cable.
Hold volume up
You're gonna hear sounds from windows in this order ;
1.Connected
2. Disconnected
3. Connected (Again , when you hear this plug the battery back in)
If you did it right then you're now in download mode.
Go to the device manager , find the LG device (I don't remember the name , but there is only one so you'll see it.) and go to properties , advanced and port settings.
Change the port to com41.
Flashtool should take over and start.
For extra guidance , see xbsall's thread ;
http://forum.xda-developers.com/showthread.php?t=1942836

To enter download mode .
Your phone in your hands without anything :-
1- Pull out battery .
2- hold vol+ and keep holding .
3- Connect your phone and you are still holding....
4- Now the phone is connected and you are holding vol+ . Insert battery and keep holding for about 3 seconds . Now the phone in download mode (there are some korean words on the screen) .
That's all
Good Luck
Sent From My P920 (ICS ported)
Hit Thanks Button If I Helped

ok i bloody given up going to use it as a bloody paper weight doing my head in.....no matter what i do i cannot get up software screen in download mode??? i do exactly as stated and still it doesn't want to do it every time blank screen phone will not power on.
with battery in screen blank went through listerning to conect disconnect connect etc do as descriped and now phone is connectected with blank screen as stated i know its connected installed everything.
cheers for the help

http://www.youtube.com/watch?v=zrkHry0gRZw this is excatly what im doing and nothing......

When you're online pm me when you can be online tomorrow.
Sent from my LG-P920 using xda app-developers app

Read the #3 post in this thread :-
http://forum.xda-developers.com/showthread.php?t=1942836
Maybe it will help .
Sent From My P920 (ICS ported)
Hit Thanks Button If I Helped

and works it
mayby this help
http://lg-usb-modem-driver.soft32.com/free-download?rel=center
good luck

ok so further update i can get it into fastboot which has a small lg symbol and says fastboot at the top but still no Korean writing software upgrade screen and in device manager i have lg cosmo come up now. It doesn't have LGE CDMA USB SERIAL PORT this up any more, ive insalled all new driver the lot everything prgressed a little further but stuck again lol cheers for the help so far

u want to flash ported ics im right?
Sent from my LG-P920 using xda app-developers app

OIKk finnally im on software download screen YAY!!!!!!!!!!! but flash tool keeps saying fail and at the top were is says model its say su660 not p920???? which i now have managed to sort so i press start and its says ready and nothing............hasnt done much phone pwers off then back to the begin again cheers again

Because you're flashing the baseband before you flash the ROM. Change the sequence , ROM first then baseband. (Just remove the baseband you added on the flash tool ".fls file" then add it again it's gonna be flashed after the ROM )
Edit : I can help via team viewer if you want.
Sent from my LG-P920 using xda app-developers app

if u read this u should know that u neednt fastboot to flash this ported ics and have to flash bin file first then fls file
and at the thread of first ported ics from xbsa tell u everthing what u use to know to flash this rom
http://forum.xda-developers.com/showthread.php?p=17177547
2nd post is in english
Sent from my LG-P920 using xda app-developers app

its all son confusing as there is so many different guides tutorals etc the only way i can get in software mode is by fast boot i can progress further to here but now im stuck tottaly lol its gets to 27% and stops because of a omap fail???

and all the time ive only been tryig to insatll the rom bin file as of present....not the fls so im now up to here and dont have clue with team viewer lol

Look at your pm
Sent from my LG-P920 using xda app-developers app

[Q] LG optimus 3d p925g bricked

I've looked at the similar threads , to be honest even if one of the suggestions might work , none of the people seem to have the same problem from my understanding.
So apologize ahead of time as i imagine someone has bricked in a similar fashion in some thread buried somewhere.
But have an unlocked P925g lg optimus 3d, got a few days ago.
Last night i rooted just fine , root checker says it was rooted properly.
Then i installed rom manager as i was following manbearpigs post.
When i got to flash clockwork mod , i clicked the button and it looked like it was doing some flashing , but the phone turned off to reboot??
and now when i power on the lg logo appears and then the screen goes funny.
If i try to hold the power down and 3d button , i get a green screen . However i'm very unsure of what to do next.
However when i plug into usb the phone goes black , refuses to turn back on until i take the battery out.
I'd pay someone here if i could , but i'll take any help i can get.
Appreciate any help.

I don't KNOW, but just an idea:
May be your phone is stuck in download mode?
With this latest ICS (original, not ported) my phone shows black screen when in download mode (no message SW UPDATE and something in Korean).
Did you try to plug your phone to PC? Does your comp see it?
From what I read flashing wrong CWM might cause problems...
Also try to read Ressurection thread by xbsa, it helped me couple times
Don't give up!
Sent from my LG-P920 using xda app-developers app

My computer does see the phone if i take the battery out , and push the volume down while it connects. However when it connects , it cannot find drivers that it find originally.
I'd be happy just to have the phone back to froyo right now , however i am not giving up , just asking for advice. Will reply once i look at the resurrection post you suggested.

odanhammer said:
My computer does see the phone if i take the battery out , and push the volume down while it connects. However when it connects , it cannot find drivers that it find originally.
I'd be happy just to have the phone back to froyo right now , however i am not giving up , just asking for advice. Will reply once i look at the resurrection post you suggested.
Click to expand...
Click to collapse
just try the LG flash tool to flash without reinstalling drivers, if it doesn't flash you have to uninstall all LG drivers, reboot your computer, install again LG drivers and flash Bin files using Flash tool, you don't have to flash Bin and fls files at the same time, first Bin file, if there is no network close LG flash, open it again and flash Fls at second time to get the right baseband (sometimes it not necessery to flash this fls files)
or just follow this guide
http://www.technopat.net/forum/android-telefonlari/9128-lg-optimus-3d-ultimate-flash-guide.html

odanhammer said:
My computer does see the phone if i take the battery out , and push the volume down while it connects. However when it connects , it cannot find drivers that it find originally.
I'd be happy just to have the phone back to froyo right now , however i am not giving up , just asking for advice. Will reply once i look at the resurrection post you suggested.
Click to expand...
Click to collapse
To get to download mode you need to keep battery in, remove sim and SD card. Hold vol+ and plug USB cable. You should see message SW UPDATE and some Korean. My phone now doesn't show it, just blank screen. But LG Flash sees it and u can flash bin fls.
Sent from my LG-P920 using xda app-developers app

Remove drivers and use the LGMobile Support Tool to install the drivers, if your phone is connected it should detect it and finish the install process. I believe the P925G is a Rogers device? You might have to select Rogers as your carrier to find the drivers.

Android1993 said:
Remove drivers and use the LGMobile Support Tool to install the drivers, if your phone is connected it should detect it and finish the install process. I believe the P925G is a Rogers device? You might have to select Rogers as your carrier to find the drivers.
Click to expand...
Click to collapse
ok so i've deleted all lg related material from my computer, when i connected the phone to the computer with battery in , nothing happens.
Without battery , it detects automatically , then it continues a loop of picking it up and dropping off .
So i moved to my laptop , attempted to follow the guide kupuku posted, however after getting the went logo on the phone , it never gets past that stage no matter what i do.
I've also tried LG support tool , it doesn't detect my phone on either my computer or laptop , even after installing/reinstalling the proper drivers.
LG does have a live chat which isn't open and the phone number can not be reached from my area.. i imagine its a 1800 number for asia or something as i do live in Canada.
My only other choice is to take the phone down to a guy that can get it out of boot loop for close to what i paided for the phone a few days ago.
Least to say , that option is something i want to do , nor can i afford to do.
once again i apprecaite the help that has been given , and for any that will be given.
edit:
Ok so i got lg mobile support to work by doing recovery and entering my imei number. Its currently at 4% but its been close to an hour and a half. Might restart and see if that works , but my phone is doing the logo boot repeat pattern still , even during this update. so not sure what exactly is happening.

[Q] Factory reset problem on Lg optimus 3D with ICS

Hi guys, I have a problem, I did a factory reset on my rooted LG Thrill 4G / Optimus 3D with ICS. when it reboot, I get the TWRP menu and I dont know what to do, I'm desperate I cant use the phone in that condition, I have tried almost all the options but nothing works. can someone help me?
Im new in this

Josesanchez21 said:
Hi guys, I have a problem, I did a factory reset on my rooted LG Thrill 4G / Optimus 3D with ICS. when it reboot, I get the TWRP menu and I dont know what to do, I'm desperate I cant use the phone in that condition, I have tried almost all the options but nothing works. can someone help me?
Im new in this
Click to expand...
Click to collapse
Flashing ics the .bin .fls

Check your xda messages. I sent you a PM.
I am not sure what all you did, but if factory hard reset does not fix your issue, you can usually flash a firmware to bring back your device
http://forum.xda-developers.com/showthread.php?p=39269819
It could be you just need to flash just a bootloader, but like I say, I am not sure what you did.
EDIT: since you can access twrp, it would be easier to install ICS by installing .zip files from this thread
http://forum.xda-developers.com/showthread.php?p=39130435
Do 1-3... install ICS as in #2 there and boot125 as in step 3, then reboot phone (you will need to copy the files to a micro sd by plugging one into a pc by an adapter). That is one way that would be 'easier' than setting up LG Flash Tool. If TWRP cannot find your external micro sd, you may need to proceed as I mention above.

hard reset
Josesanchez21 said:
Hi guys, I have a problem, I did a factory reset on my rooted LG Thrill 4G / Optimus 3D with ICS. when it reboot, I get the TWRP menu and I dont know what to do, I'm desperate I cant use the phone in that condition, I have tried almost all the options but nothing works. can someone help me?
Im new in this
Click to expand...
Click to collapse
try to make hard reset like this http://forum.xda-developers.com/showthread.php?t=2337545&page=5
in step 3 or flash rom :cyclops:

I forgot
My lg Optimus 3D is Lg p925 if i try p920 it will work anyway? and also TWRP says that I dont Have OS

The ICS?
drastic00 said:
Check your xda messages. I sent you a PM.
I am not sure what all you did, but if factory hard reset does not fix your issue, you can usually flash a firmware to bring back your device
http://forum.xda-developers.com/showthread.php?p=39269819
It could be you just need to flash just a bootloader, but like I say, I am not sure what you did.
EDIT: since you can access twrp, it would be easier to install ICS by installing .zip files from this thread
http://forum.xda-developers.com/showthread.php?p=39130435
Do 1-3... install ICS as in #2 there and boot125 as in step 3, then reboot phone (you will need to copy the files to a micro sd by plugging one into a pc by an adapter). That is one way that would be 'easier' than setting up LG Flash Tool. If TWRP cannot find your external micro sd, you may need to proceed as I mention above.
Click to expand...
Click to collapse
the ICS as in #2 is the V30A file?

error flashing
Josesanchez21 said:
the ICS as in #2 is the V30A file?
Click to expand...
Click to collapse
Error flashing

I suspect drivers are not installed correctly. Check part 1 very carefully.
You must install the .bin of v28B first by Flash Tool. That will install the OS. If and when you then decide to install an xbsa rom from TWRP, v8 changes it to v30A. vR3D is v30C (that one requires the large partition v28B).
Factory reset should not have done this to your phone

yeah I think it was my fault
drastic00 said:
I suspect drivers are not installed correctly. Check part 1 very carefully.
You must install the .bin of v28B first by Flash Tool. That will install the OS. If and when you then decide to install an xbsa rom from TWRP, v8 changes it to v30A. vR3D is v30C (that one requires the large partition v28B).
Factory reset should not have done this to your phone
Click to expand...
Click to collapse
yeah I think it was my fault after all XD

if I send you a video?
drastic00 said:
I suspect drivers are not installed correctly. Check part 1 very carefully.
You must install the .bin of v28B first by Flash Tool. That will install the OS. If and when you then decide to install an xbsa rom from TWRP, v8 changes it to v30A. vR3D is v30C (that one requires the large partition v28B).
Factory reset should not have done this to your phone
Click to expand...
Click to collapse
If i send you a video showing what is my problem, you will get any idea of how to repair it? sorry for bad english :silly: heres the video link: http://www.youtube.com/watch?v=YLbKqzSLB-g

Are you on Windows 7?
I would more than video like to see a screen shot of the drivers in your pc Device Manager (when phone is connected to pc by usb, you hold volume up on phone when you plug it in).
There should be 'omap 4430' in 'other devices' in pc Device Manager. If correctly installed, it should NOT be flashing/blinking on and off. You must use the driver from the wkpark Fastboot package, not the one from the 'omap4flash installer' pack.
There are also two LG drivers that must be installed to pc. And there should be LG Cosmo device appearing in Device Manager someplace also, port set to 41.
I ask because driver install can be tricky or difficult, and confusing when you first do all of that. And, it is very important to have it all correct to flash successfully. Usually it is the problem when flash will not complete or start.
It also adds to difficulty that you must translate the instructions...

just one driver
drastic00 said:
Are you on Windows 7?
I would more than video like to see a screen shot of the drivers in your pc Device Manager (when phone is connected to pc by usb, you hold volume up on phone when you plug it in).
There should be 'omap 4430' in 'other devices' in pc Device Manager. If correctly installed, it should NOT be flashing/blinking on and off. You must use the driver from the wkpark Fastboot package, not the one from the 'omap4flash installer' pack.
There are also two LG drivers that must be installed to pc. And there should be LG Cosmo device appearing in Device Manager someplace also, port set to 41.
I ask because driver install can be tricky or difficult, and confusing when you first do all of that. And, it is very important to have it all correct to flash successfully. Usually it is the problem when flash will not complete or start.
It also adds to difficulty that you must translate the instructions...
Click to expand...
Click to collapse
just lg cosmo driver doesnt work it never upgrade... and yeah i have windows 8 but i did the same on my other computer that has windows 7 and its the same problem

You must be logged on to pc as administrator. Use Windows 7, much easier. I have Win 7 x64.
Read all details carefully. Run everything as admin. ALL antivirus off. You must remove all old LG things from pc before beginning. Reboot pc. Install omap4flash. Restart pc. Install the two provided LG drivers. One of these you must force install. Restart pc.
Connect phone, vol. up to pc (no battery in phone, all of part 1). Link omap driver from Fastboot folder as described. Wait a bit for it to complete. When done here omap4430 will stop blinking.
Disconnect phone from pc. Connect it again, volume up, and LG drivers will install. Wait for it to process and finish. Change port to 41.
If LG drivers do not install when connecting phone the second time, try running omap4flash installer and UNinstall it. Reboot pc. Then try the above again.
Some things, like wkpark bootloader conflict with omap4flash (this is mentioned in the guide) so you may need to try it both ways.

Dude im desesperate
drastic00 said:
You must be logged on to pc as administrator. Use Windows 7, much easier. I have Win 7 x64.
Read all details carefully. Run everything as admin. ALL antivirus off. You must remove all old LG things from pc before beginning. Reboot pc. Install omap4flash. Restart pc. Install the two provided LG drivers. One of these you must force install. Restart pc.
Connect phone, vol. up to pc (no battery in phone, all of part 1). Link omap driver from Fastboot folder as described. Wait a bit for it to complete. When done here omap4430 will stop blinking.
Disconnect phone from pc. Connect it again, volume up, and LG drivers will install. Wait for it to process and finish. Change port to 41.
If LG drivers do not install when connecting phone the second time, try running omap4flash installer and UNinstall it. Reboot pc. Then try the above again.
Some things, like wkpark bootloader conflict with omap4flash (this is mentioned in the guide) so you may need to try it both ways.
Click to expand...
Click to collapse
i did all the steps and nothing works i have flashed a lot of roms and no matter what I get trapped in cwm I think i will send you the picture of my drivers and a video of me making all the steps of this guy
http://forum.xda-developers.com/showthread.php?t=1942836 because this http://forum.xda-developers.com/showthread.php?p=39130435 doesnt helped me a lot... If you have any other Idea of what is the real problem please tell me.

You can use xbsall's guide if you want, but the driver install process is the same.
Karim Kahale has an unbrick guide that uses Smartflash instead. You might find it easier, I do not know. It should be in O3D General section. Just do not "Erase Entire CP" or you will have to recover your IMEI.
Whatever you choose, I would stick with one method and see it through to completion. Trying too many things may just make the problem worse.

OMG!
drastic00 said:
You can use xbsall's guide if you want, but the driver install process is the same.
Karim Kahale has an unbrick guide that uses Smartflash instead. You might find it easier, I do not know. It should be in O3D General section. Just do not "Erase Entire CP" or you will have to recover your IMEI.
Whatever you choose, I would stick with one method and see it through to completion. Trying too many things may just make the problem worse.
Click to expand...
Click to collapse
Thank you so much i Fixed my cellphone !!
but now I have another problem, and is the reason why I did the factory reset is that I have ghost screen and someone told that if I do a factory reset I could solve it. oh and I cant use the camera.

Never had the screen issue so not sure. Camera should be working. Mine does. Use the button on touch screen to take a picture, I think 3D button has a bug in official ICS so it will not take a photo that way. Not sure, I always use touch screen button for that. Or maybe try rebooting phone a couple of times. It is possible I suppose that flash was incomplete or corrupt from incorrect driver install. If you are sure that is all good you might try redownloading the .bin file and flashing again. Beyond that, not sure. Maybe someone else knows???