Related
Ok im on lg thrill,I have all my drivers install,I have the lg,omap,etc installed.I hold the volume button up and plug up the phone,but it does not show the "detected new hardware,I also try the volume up plus power button and still no work,i am on windows xp,Ive been trying to do this for the last couple of days,what am i doing wrong???????
Make sure to double check that you did everything and installed everything as stated in the instruction thread. Run flashtool as admin. If still doesnt work, and this is only way it worked for me, do the power volume up but remove the battery. Thats how i was able to install the baseband after 2 days of trying.
Sent from my LG-P920 using XDA App
Have you removed the sim/micro sd/batery then do it. This is where i got stuck lol soon as i removed them all i just held the power n volume button for like 10 seconds i didnt release them till my pc noticed it
Sent from my LG-P920 using xda premium
so do i install the baseband first or the rom
ssfirme said:
so do i install the baseband first or the rom
Click to expand...
Click to collapse
doesn't matter...
I give up i tried every freaking way and cant get the baseband on this junk
ssfirme said:
I give up i tried every freaking way and cant get the baseband on this junk
Click to expand...
Click to collapse
i just want to share what i did to flash GB baseband.
1. i uninstall everything that smell LG from my computer (pc suite, divx, LG smart world, LG flashtool)
2. install step by step everything from the beginning (except LG pc suite that come from the phone), then i install pc suite (2 file) that come from the tutorial page.
3. follow instructon from the tutorial page.
4. my computer didn't detect omap but LG modem, and when it needs the driver, i take it to omap driver that's been installed before.
5. change port and follow the tutorial.
6. when connecting to computer, first time to make it "ready"
7. second time connecting, i took out batterey first before connecting back to finish the flashing.
8. flashing and stop at 22% (GB "leaked" baseband), restart phone,..and the signal bar finally there.
PS : im using Win XP sp2,..sorry for my bad english
danielkaboom said:
i just want to share what i did to flash GB baseband.
1. i uninstall everything that smell LG from my computer (pc suite, divx, LG smart world, LG flashtool)
2. install step by step everything from the beginning (except LG pc suite that come from the phone), then i install pc suite (2 file) that come from the tutorial page.
3. follow instructon from the tutorial page.
4. my computer didn't detect omap but LG modem, and when it needs the driver, i take it to omap driver that's been installed before.
5. change port and follow the tutorial.
6. when connecting to computer, first time to make it "ready"
7. second time connecting, i took out batterey first before connecting back to finish the flashing.
8. flashing and stop at 22% (GB "leaked" baseband), restart phone,..and the signal bar finally there.
PS : im using Win XP sp2,..sorry for my bad english
Click to expand...
Click to collapse
1. Do i uninstall the lg drivers also?
2. Do you mean the lg flash tool?
i did exactly the same as ssfirme , i found the original instuctions didnt work for me, i think for me the bit that made it work was removing the bettery before connecting it to the computer for a second time as this step isnt in the original instructions
ok i need help please , i had gbread on it and installed superoneclick to get root then tried to flash cwm with vipermod. message said out of storage space or something (dont have ext mem only internal)and now phone will not turn on.
have followed this guide http://forum.xda-developers.com/showthread.php?t=1244490 and phone was recognised by omapp but couldnt change the port in device manager and couldnt find a bin to download so i tried to flash a kdz v21a
clicked start on lgflasher but nothing happened so after about 5 mins i cancelled it thinking without the port change it was a waste of time.
now i cant even get omapp to flash up when i connect phone . device manager refreshes but i cant see anything change .
hope thats enough info for some kind person to help.
many thanks in advance
marty
Try this start on step 3 its in the thrill forum but they are the same phone http://forum.xda-developers.com/showthread.php?t=1491870
sent from my acidhazard thrill
marty41 said:
...then tried to flash cwm with vipermod...
marty
Click to expand...
Click to collapse
Where did you get vipermod from? The Transformer Prime forums? That's meant for the TFP and would not have worked with the O3D since it flashes to mmcblk0p4 rather than mmcblk0p. You should have used the flasher here.
Download this, this and this. Extract smartflash.zip, install both driver packages. Then, run Windows Enabler, in the notifications bar, click it and make sure it is set to 'on'.
Now remove your phone's battery and sim card, press volume up and connect your phone to the computer. Hold volume up until it is detected by the computer. It should take no longer than 20 seconds.
Now run B_SmartFlashTool_Extern.exe, go to rom copy d/l, select LGP920_CP.fls for CP bin and LGP920_AP.bin for AP bin. Make sure under communications setup that your phone is connected (verify the com port in device manager) and then click start. If all goes well, you'll have a stock v21D phone again
Thanks for the help guys but i'm not getting a com port when i connect the phone so i don't think i can use any of those methods . or can i
i want to go back to the beginning and see if omapp will detect phone and install drivers but i can uninstall the installer but dont think that will remove the drivers , does anyone know how to do that.(cos i think i messed that bit up )
thanks again
marty
vipermod , i think i followed a link somewhere in the o3d forum where someone said u could use it to flash cwm
so , i uninstalled all lg drivers uninstalled omap installer searched registry for for any mention of omap and deleted (some wouldnt delete ) .
restarted computer (xp by the way )
then installed omap installer and lg drivers and connected phone holding vol up
and................. NOTHING whereas yesterday i had a little icon in the task bar and the opportunity to install omap drivers.
conclusion , phone is dead , i had an oppurtunity to fix it yesterday and i blew it
hope someone tells me i'm wrong but its not looking good
marty
take off battery and just put your usb cable and tell us if it shows omap in your device manager
dont press keys
if i connect phone without battery device manager just refreshes a couple of times but nothing changes with regards to ports doesn't matter if i have vol+ button in power button in or nothing
thanks anyway
marty
am i getting somewhere
update : ok so i'm on a clean install of xp and i connected the phone with vol+ and it wants to install omap4430 drivers. is that good news?
i installed omapinstaller , then the 2 lg drivers ca and ma , then reconnected the phone and went thro omap driver install but still don't have any ports in device manager
is there no way i can force it to flash without it having to think it is connected cause if its recognising it as omap4430 there must be something there
don't want to give up on it too easy , if only i put this much effort into it whilst it was working lol
marty
evening all . new update
tonight i've installed the lg support tool and drivers and found that if i leave my phone connected i occasionally get "TI sample boards" popping up in device manager for a couple of seconds without having to press buttons , unfortunately it doesn't stay on for any longer with buttons pressed.
i was wondering how to force install the "LG CDMA composite usb device " drivers cos its never asking for them as it should according to the tutorial
hope someone can help cos i've seen a few threads with same problem as me
marty
hi have been trying to update to 4.0 via flash tool but ive tried everything and cannot get it to work......ive been trying for 3 days and ive pretty much had enough of trying on my own so i though id would ask for help.
ok firstly i am on gb 2.3 im running custom cm7 no probs but i wana take the next step 4.0 so....i have all lg flash tool etc and fast load etc all nessacary files needed but for some reason my phone wont connet and flash its doing my head in. i have it into download mode, battery out etc but after that nothing i cannot progress further its like the program wont connect/register the phone.
im running win7 i even looked into other post and thought this maybe the problem but i have already installed these when gone into download mode as said here If you plug your Phone on PC without battery, OMAP4430 device appeared for seconds and then disappeared in your Windows Device Manager
(check arsen4oo photo guide in post #3)
On windows 7 sometimes OMAP4430 flashes too fast so you cant install driver.
There is a a windows feature that will help you install the driver easier.
To view devices that were once installed but are no longer attached to the computer, open a Command Prompt window using the Run As Administrator option and enter the command:
SET DEVMGR_SHOW_NONPRESENT_DEVICES=1
Then, from the same command prompt, type devmgmt.msc to open Device Manager. Choose View, Show Hidden Devices. The new instance of Device Manager will show “ghosted” entries for devices that were once present. This technique is especially useful for fixing problems caused by leftover drivers after replacing a network card or video card—you can easily delete the ghosted device or update the OMAP4430 driver.e
i just dont know what im doing wrong
cheers in advance
HI,
Please uninstall all LG drivers, and start again. If you are using WIN7, run it with WINXP SP3 compatibility mode.
Getting the Software upgrade screen is tricky, the timing needs ti be just right for the screen to stay, else it blinks and the OMAPP difficulty starts.
You need to listed to the connect disconnect sounds carefully.
Its not difficult, just that the timing needs to be right for the battery to be inserted.
all the best
schubeir
schubeir said:
HI,
Please uninstall all LG drivers, and start again. If you are using WIN7, run it with WINXP SP3 compatibility mode.
Getting the Software upgrade screen is tricky, the timing needs ti be just right for the screen to stay, else it blinks and the OMAPP difficulty starts.
You need to listed to the connect disconnect sounds carefully.
Its not difficult, just that the timing needs to be right for the battery to be inserted.
all the best
schubeir
Click to expand...
Click to collapse
ok so i unistalled all drivers etc done as said but im still doing something wrong.....
1.i have batt out connect phone wait few seconds for it to connect hear a sound connection keep held down till also hear another connection to say all connected etc.(the drivers have installed etc)
2.the screen is blank still battery is out
3.i have installed omap flash, lg flash tool and lg smart flash tool and fastboot and i can get any to work with phone
4.now there is no software update on screen even if i put battery back in phone just stay blank
so thats were i get to so lost.....
cheers in advance
And in FLASH TOOL TUTORIAL there is illustrations of a cable broken down etc do I have to do this to get into download mode and what acctual flash tool do I need to use because there is a few out but tried most but don't work with mine is it to dowith cable? And I have brought new cables etc just in case cheers in advance
Another stupid question but it shouldn't have anything to do with my phone having being rooted and not runngin LG software......I'm so confused with it all as I have tried everything and if it don't work phone can go to someone else lol cheers again
matt2098 said:
Another stupid question but it shouldn't have anything to do with my phone having being rooted and not runngin LG software......I'm so confused with it all as I have tried everything and if it don't work phone can go to someone else lol cheers again
Click to expand...
Click to collapse
Make sure all the drivers from the guide are installed. (including omap driver)
Load the DLL and the rom to lg flashtool.
Listen to the port with LG flashtool's port settings. (One is enough , The icon with a printer cable that's the port settings)
Take the battery out but be ready to plug it back in.
connect the usb cable.
Hold volume up
You're gonna hear sounds from windows in this order ;
1.Connected
2. Disconnected
3. Connected (Again , when you hear this plug the battery back in)
If you did it right then you're now in download mode.
Go to the device manager , find the LG device (I don't remember the name , but there is only one so you'll see it.) and go to properties , advanced and port settings.
Change the port to com41.
Flashtool should take over and start.
For extra guidance , see xbsall's thread ;
http://forum.xda-developers.com/showthread.php?t=1942836
To enter download mode .
Your phone in your hands without anything :-
1- Pull out battery .
2- hold vol+ and keep holding .
3- Connect your phone and you are still holding....
4- Now the phone is connected and you are holding vol+ . Insert battery and keep holding for about 3 seconds . Now the phone in download mode (there are some korean words on the screen) .
That's all
Good Luck
Sent From My P920 (ICS ported)
Hit Thanks Button If I Helped
ok i bloody given up going to use it as a bloody paper weight doing my head in.....no matter what i do i cannot get up software screen in download mode??? i do exactly as stated and still it doesn't want to do it every time blank screen phone will not power on.
with battery in screen blank went through listerning to conect disconnect connect etc do as descriped and now phone is connectected with blank screen as stated i know its connected installed everything.
cheers for the help
http://www.youtube.com/watch?v=zrkHry0gRZw this is excatly what im doing and nothing......
When you're online pm me when you can be online tomorrow.
Sent from my LG-P920 using xda app-developers app
Read the #3 post in this thread :-
http://forum.xda-developers.com/showthread.php?t=1942836
Maybe it will help .
Sent From My P920 (ICS ported)
Hit Thanks Button If I Helped
and works it
mayby this help
http://lg-usb-modem-driver.soft32.com/free-download?rel=center
good luck
ok so further update i can get it into fastboot which has a small lg symbol and says fastboot at the top but still no Korean writing software upgrade screen and in device manager i have lg cosmo come up now. It doesn't have LGE CDMA USB SERIAL PORT this up any more, ive insalled all new driver the lot everything prgressed a little further but stuck again lol cheers for the help so far
u want to flash ported ics im right?
Sent from my LG-P920 using xda app-developers app
OIKk finnally im on software download screen YAY!!!!!!!!!!! but flash tool keeps saying fail and at the top were is says model its say su660 not p920???? which i now have managed to sort so i press start and its says ready and nothing............hasnt done much phone pwers off then back to the begin again cheers again
Because you're flashing the baseband before you flash the ROM. Change the sequence , ROM first then baseband. (Just remove the baseband you added on the flash tool ".fls file" then add it again it's gonna be flashed after the ROM )
Edit : I can help via team viewer if you want.
Sent from my LG-P920 using xda app-developers app
if u read this u should know that u neednt fastboot to flash this ported ics and have to flash bin file first then fls file
and at the thread of first ported ics from xbsa tell u everthing what u use to know to flash this rom
http://forum.xda-developers.com/showthread.php?p=17177547
2nd post is in english
Sent from my LG-P920 using xda app-developers app
its all son confusing as there is so many different guides tutorals etc the only way i can get in software mode is by fast boot i can progress further to here but now im stuck tottaly lol its gets to 27% and stops because of a omap fail???
and all the time ive only been tryig to insatll the rom bin file as of present....not the fls so im now up to here and dont have clue with team viewer lol
Look at your pm
Sent from my LG-P920 using xda app-developers app
I've looked at the similar threads , to be honest even if one of the suggestions might work , none of the people seem to have the same problem from my understanding.
So apologize ahead of time as i imagine someone has bricked in a similar fashion in some thread buried somewhere.
But have an unlocked P925g lg optimus 3d, got a few days ago.
Last night i rooted just fine , root checker says it was rooted properly.
Then i installed rom manager as i was following manbearpigs post.
When i got to flash clockwork mod , i clicked the button and it looked like it was doing some flashing , but the phone turned off to reboot??
and now when i power on the lg logo appears and then the screen goes funny.
If i try to hold the power down and 3d button , i get a green screen . However i'm very unsure of what to do next.
However when i plug into usb the phone goes black , refuses to turn back on until i take the battery out.
I'd pay someone here if i could , but i'll take any help i can get.
Appreciate any help.
I don't KNOW, but just an idea:
May be your phone is stuck in download mode?
With this latest ICS (original, not ported) my phone shows black screen when in download mode (no message SW UPDATE and something in Korean).
Did you try to plug your phone to PC? Does your comp see it?
From what I read flashing wrong CWM might cause problems...
Also try to read Ressurection thread by xbsa, it helped me couple times
Don't give up!
Sent from my LG-P920 using xda app-developers app
My computer does see the phone if i take the battery out , and push the volume down while it connects. However when it connects , it cannot find drivers that it find originally.
I'd be happy just to have the phone back to froyo right now , however i am not giving up , just asking for advice. Will reply once i look at the resurrection post you suggested.
odanhammer said:
My computer does see the phone if i take the battery out , and push the volume down while it connects. However when it connects , it cannot find drivers that it find originally.
I'd be happy just to have the phone back to froyo right now , however i am not giving up , just asking for advice. Will reply once i look at the resurrection post you suggested.
Click to expand...
Click to collapse
just try the LG flash tool to flash without reinstalling drivers, if it doesn't flash you have to uninstall all LG drivers, reboot your computer, install again LG drivers and flash Bin files using Flash tool, you don't have to flash Bin and fls files at the same time, first Bin file, if there is no network close LG flash, open it again and flash Fls at second time to get the right baseband (sometimes it not necessery to flash this fls files)
or just follow this guide
http://www.technopat.net/forum/android-telefonlari/9128-lg-optimus-3d-ultimate-flash-guide.html
odanhammer said:
My computer does see the phone if i take the battery out , and push the volume down while it connects. However when it connects , it cannot find drivers that it find originally.
I'd be happy just to have the phone back to froyo right now , however i am not giving up , just asking for advice. Will reply once i look at the resurrection post you suggested.
Click to expand...
Click to collapse
To get to download mode you need to keep battery in, remove sim and SD card. Hold vol+ and plug USB cable. You should see message SW UPDATE and some Korean. My phone now doesn't show it, just blank screen. But LG Flash sees it and u can flash bin fls.
Sent from my LG-P920 using xda app-developers app
Remove drivers and use the LGMobile Support Tool to install the drivers, if your phone is connected it should detect it and finish the install process. I believe the P925G is a Rogers device? You might have to select Rogers as your carrier to find the drivers.
Android1993 said:
Remove drivers and use the LGMobile Support Tool to install the drivers, if your phone is connected it should detect it and finish the install process. I believe the P925G is a Rogers device? You might have to select Rogers as your carrier to find the drivers.
Click to expand...
Click to collapse
ok so i've deleted all lg related material from my computer, when i connected the phone to the computer with battery in , nothing happens.
Without battery , it detects automatically , then it continues a loop of picking it up and dropping off .
So i moved to my laptop , attempted to follow the guide kupuku posted, however after getting the went logo on the phone , it never gets past that stage no matter what i do.
I've also tried LG support tool , it doesn't detect my phone on either my computer or laptop , even after installing/reinstalling the proper drivers.
LG does have a live chat which isn't open and the phone number can not be reached from my area.. i imagine its a 1800 number for asia or something as i do live in Canada.
My only other choice is to take the phone down to a guy that can get it out of boot loop for close to what i paided for the phone a few days ago.
Least to say , that option is something i want to do , nor can i afford to do.
once again i apprecaite the help that has been given , and for any that will be given.
edit:
Ok so i got lg mobile support to work by doing recovery and entering my imei number. Its currently at 4% but its been close to an hour and a half. Might restart and see if that works , but my phone is doing the logo boot repeat pattern still , even during this update. so not sure what exactly is happening.
On instalation with kdz file show me KDz Error and i ll removed a battery in emergency mode....And now my phone won't turn on..
Help me....
hard bricked my LG Optimus One when i remove a battery after kdz error..
my phone can't Connect on PC i have instaled USb drivers properly....After removed a battery in kdz error on emergency mode phone won't turn
There is an emergency mode you can try as long as you have the software on your computer to flash factory settings on to your phone.
Toemergency mode:
1) Take out the battery
2) Have a usb cable already connected to the computer.
3) Hold the power button + volume up + back button AND then connect the usb while holding those buttons
Yellow screen will appear with the words emergency mode in the middle.
At this point, do some forum searching, find some kind of stock image file and LG program to flash stock system on to the phone.
**I DONT OWN THIS DEVICE** but i had a few cases and this should work for you too
...........
ThatLatinGuy said:
There is an emergency mode you can try as long as you have the software on your computer to flash factory settings on to your phone.
Toemergency mode:
1) Take out the battery
2) Have a usb cable already connected to the computer.
3) Hold the power button + volume up + back button AND then connect the usb while holding those buttons
Yellow screen will appear with the words emergency mode in the middle.
At this point, do some forum searching, find some kind of stock image file and LG program to flash stock system on to the phone.
**I DONT OWN THIS DEVICE** but i had a few cases and this should work for you too
Click to expand...
Click to collapse
Thanks Buudy for this but is no worked i do it that....my phone still won't turn on
My PC don't a find any usb cable from the phone..in the device menager in PORTS show me UKNOWN USB !
i can't connect a phone on PC
i have several android softwares...
i think a instalation is not complete on my phone and i wanna find some TOOL program for Clean a not completed instalation...
maybe in the phone hardware is broken processor...but i don't sure for that... .
Give me some tool for clean a not completed instaltion.... BC wipe is a for parchase 20$ Some FREE if u Know...
Or something other instruction for a connect phone to the PC...
Sorry for bad english.... :laugh:
Deki1231 said:
Thanks Buudy for this but is no worked i do it that....my phone still won't turn on
My PC don't a find any usb cable from the phone..in the device menager in PORTS show me UKNOWN USB !
i can't connect a phone on PC
i have several android softwares...
i think a instalation is not complete on my phone and i wanna find some TOOL program for Clean a not completed instalation...
maybe in the phone hardware is broken processor...but i don't sure for that... .
Give me some tool for clean a not completed instaltion.... BC wipe is a for parchase 20$ Some FREE if u Know...
Or something other instruction for a connect phone to the PC...
Sorry for bad english.... :laugh:
Click to expand...
Click to collapse
Your device is hard-bricked. Your only bet in LG. Go to LG and tell them you turned it off, and now it doesn't start up
That thing happened to my phone a year ago. You can't do nothing at home. Go to a service.
------------------
Sent from my LG-P500 using xda-developers app
Android 2.3.7
Cyanogen Mod 7.2
Can u Plz tell Whr I can download stock rom for lg optimus one in Kdz format
Sent from my GT-I9082 using Tapatalk 2