Hi
This is TWRP recovery(ported by me) for Huawei Y560-U02 sc7731g/sc8830 :
https://drive.google.com/file/d/0B1MnFzuGjoAPV2pvWFJyNjFfN1k/view?usp=sharing 2.8.7.0
TWRP 3.0.2-0 :
https://drive.google.com/file/d/1vJOnjEBEIkwAqtoAfd6tAL7msnAgEjbn/view?usp=sharing 3.0.2-0
Rename to < recovery >
Flash recovery.img via adb/fastboot !!!(https://dottech.org/21534/how-to-in...ows-computer-for-use-with-your-android-phone/) (http://forum.xda-developers.com/showthread.php?p=48915118#post48915118) (http://forum.xda-developers.com/attachment.php?attachmentid=2480396&d=1388281089)
On your own risk. This recovery is for Huawei y560-u02 sc7731g/sc8830
In joy
Good Luck
After successfully installed recovery, go to : http://forum.xda-developers.com/android/development/root-sutwrp-huawei-y560-u02-y5-t3397282 and install Superuser or SuperSu
It just says: Partition 'recovery' not support flash
I tried to unlock bootloader via fastboot oem unlock, however it is just stuck there.
Trying fastboot boot recovery also transfers the file and says "Booting" from CLI but doesn't really do anything
Lost.soul said:
It just says: Partition 'recovery' not support flash
I tried to unlock bootloader via fastboot oem unlock, however it is just stuck there.
Trying fastboot boot recovery also transfers the file and says "Booting" from CLI but doesn't really do anything
Click to expand...
Click to collapse
it flashes without unlock bootloader
rename to <recovery>
flash via adb/fastboot :
<adb reboot bootloader>
<fastboot flash recovery recovery.img>
........................................
okay
........................................
<fastboot reboot>
........................................
<exit>
Then need to flash Superuser via TWRP and bootloader will be unlocked
Superuser link: https://drive.google.com/file/d/0B1MnFzuGjoAPOEZQUmUydWx6TE0/view?usp=sharing
This recovery for huawei y560-u02 sc7731g/sc8830
Try one or other recovery, i'm using 2.8.7.0 , but they both work good
Good luck
Hii
It work fine
Thank you so much
mr_sa3id said:
It work fine
Thank you so much
Click to expand...
Click to collapse
welcome
Sir do you have stock recovery img? I flashed your twrp recovery and I want to revert back to the stock. Could you kindly please upload the file? Thanks.
ericotena said:
Sir do you have stock recovery img? I flashed your twrp recovery and I want to revert back to the stock. Could you kindly please upload the file? Thanks.
Click to expand...
Click to collapse
huawei y560-u02 stock recovery: https://drive.google.com/file/d/0B1MnFzuGjoAPdi0xNVZaeTBrZXM/view?usp=sharing 8,72 MB
b105 Update zip: https://drive.google.com/file/d/0B1MnFzuGjoAPcllGdU1KXzZJSU0/view?usp=sharing
or firmware b104 .pac file: https://drive.google.com/file/d/0B1MnFzuGjoAPenJRUTFuQTZsLWc/view?usp=sharing
You can to make backup via twrp
If intersting for you, look this link:http://forum.xda-developers.com/android/development/root-sutwrp-huawei-y560-u02-y5-t3397282
in joy
amiro13 said:
huawei y560-u02 stock recovery: https://drive.google.com/file/d/0B1MnFzuGjoAPdEtQMTI1T1p4LWM/view?usp=sharing 8,72 MB
b105 Update zip: https://drive.google.com/file/d/0B1MnFzuGjoAPcllGdU1KXzZJSU0/view?usp=sharing
or firmware b104 .pac file: https://drive.google.com/file/d/0B1MnFzuGjoAPenJRUTFuQTZsLWc/view?usp=sharing
You can to make backup via twrp
If intersting for you, look this link:http://forum.xda-developers.com/android/development/root-sutwrp-huawei-y560-u02-y5-t3397282
in joy
Click to expand...
Click to collapse
Sir how to use the .pac file? Btw the stock recovery is for b104?
ericotena said:
Sir how to use the .pac file? Btw the stock recovery is for b104?
Click to expand...
Click to collapse
stock recovery you can to flash via adb/fastboot, like twrp, without problem.
link for recovery, is stock b104.
for firmware .pac b104, extract archive and use guide and software
amiro13 said:
stock recovery you can to flash via adb/fastboot, like twrp, without problem.
link for recovery, is stock b104.
for firmware .pac b104, extract archive and use guide and software
Click to expand...
Click to collapse
Will the pac file overwrite the system? My phone is currently full of malwares.
ericotena said:
Will the pac file overwrite the system? My phone is currently full of malwares.
Click to expand...
Click to collapse
Yes of course, you will get new clear official system .
I did it a few time. It works fine.
need all system , ... backuped by TWRP
Hello
I install TWRP.
I need a Compete rom that backup by TWRP.
I wish Restore it to my phone.
i search internet but not found.
please help.
please help
Hi
my phone is Y560-u02 sc8830
IMEI my phone is null
-----------------------------------------------------------------
info from phone :
Checking environment ...
System Info
Display ID: HUAWEIY560-U02
System Ver: 4.4.2 REL
API Level: 19
Incremental: C328B104
Model: HUAWEI Y560-U02
Brand: HUAWEI
Device: HWY560-U
Platform: sc8830
Product: Y560-U02
Language: en
Rigion: US
SDCard Info
SDCARD[1] QN1SMB
> CID: 150100514e31534d4206b48ed2d79200
> CSD: d02701320f5903fff6dbffef8e404000
> Type: MMC
> Serial: 0xb48ed2d7
> Parts: 28
Device Info
Serial number: 1111111111111
Hardware: sc8830
Bootmode: normal
Bootloader ver: unknown
Revision: 0
Main version:
Baseband ver: unknown
GSM baseband: TM_BASE_MP_II_HUAWEI_W15.18|sc7731g_CP0_modem|05-01-2015 22:08:55
GSM sim state: NOT_READY
Get Bluetooth info failed
WiFi interface:
WiFi MAC: c4:cb:b9:14:97:ad
WiFi state: INACTIVE
Root Access: No root
Get device information done , time used 3.06s
Time used : 3.1 s
Scanning devices ... 1 found
dev[1] 1111111111111
Mode: normal
Hardware: sc8830
Manufactory: HUAWEI
Model: HUAWEI Y560-U02
Detect 1 USB devices not install driver
Checking environment ...
System Info
Display ID: HUAWEIY560-U02
System Ver: 4.4.2 REL
API Level: 19
Incremental: C328B104
Model: HUAWEI Y560-U02
Brand: HUAWEI
Device: HWY560-U
Platform: sc8830
Product: Y560-U02
Language: en
Rigion: US
SDCard Info
SDCARD[1] QN1SMB
> CID: 150100514e31534d4206b48ed2d79200
> CSD: d02701320f5903fff6dbffef8e404000
> Type: MMC
> Serial: 0xb48ed2d7
> Parts: 28
Device Info
Serial number: 1111111111111
Hardware: sc8830
Bootmode: normal
Bootloader ver: unknown
Revision: 0
Main version:
Baseband ver: unknown
GSM baseband: TM_BASE_MP_II_HUAWEI_W15.18|sc7731g_CP0_modem|05-01-2015 22:08:55
GSM sim state: NOT_READY
Get Bluetooth info failed
WiFi interface:
WiFi MAC: c4:cb:b9:14:97:ad
WiFi state: INACTIVE
Root Access: No root
Get device information done , time used 2.90s
Time used : 2.9 s
-----------------------------------------------------------------
plese help
saeed1386 said:
Hello
I install TWRP.
I need a Compete rom that backup by TWRP.
I wish Restore it to my phone.
i search internet but not found.
please help.
Click to expand...
Click to collapse
Refer to post #7. Use the .pac file.
saeed1386 said:
Hi
my phone is Y560-u02 sc8830
plese help [/SIZE]
Click to expand...
Click to collapse
ericotena said:
Refer to post #7. Use the .pac file.
Click to expand...
Click to collapse
post #7 , there is link for firmware .pac file
for firmware .pac b104, extract archive and use guide and software
good luck
Hello.
How can I unlock the bootloader first to flash TWRP?
EternalXDA said:
Hello.
How can I unlock the bootloader first to flash TWRP?
Click to expand...
Click to collapse
Nohow. Bootloader of my device was locked. When i made port twrp v2.8.7.0 , it was flashed without unlock bootloader. First: flash twrp via adb/fastboot, check bootloader info- bootloader will locked, and then flash superuser.zip file via twrp, go to settings and set superuser access, e.t.c...
Now check bootloader info via adb/fastboot, it will unlocked.
For me was so.
I specifically checked several times.
Look the screenshot : http://forum.xda-developers.com/android/development/root-sutwrp-huawei-y560-u02-y5-t3397282
Hey, can somebody help?
I want to root my Y560-U02 sc8830, install the TWRP and etc.
fastboot doesn't recognize my phone. adb devices shows my phone listed, but when I type adb reboot bootloader and fastboot devices after that, it's blank.
What should I do?
I have both Google USB drivers and HiSuite (downloaded from huawei website) installed on my machine.
---------- Post added at 21:57 ---------- Previous post was at 21:53 ----------
amiro13 said:
Nohow. Bootloader of my device was locked. When i made port twrp v2.8.7.0 , it will flashed without unlock bootloader. First: flash twrp via adb/fastboot, check bootloader info- bootloader will locked, and then flash superuser.zip file via twrp, go to settings and set superuser access, e.t.c...
Now check bootloader info via adb/fastboot, it will unlocked.
For me was so.
I specifically checked several times.
Look the screenshot : http://forum.xda-developers.com/android/development/root-sutwrp-huawei-y560-u02-y5-t3397282
Click to expand...
Click to collapse
The problem is I can't access my phone when I boot it into fastboot mode.
It appears that I'm missing some drivers for the device. Where did you guys got your drivers from?
EternalXDA said:
I have both Google USB drivers and HiSuite (downloaded from huawei website) installed on my machine.
Click to expand...
Click to collapse
Extract this zip and paste to your adb/fastboot folder : https://drive.google.com/file/d/0B1MnFzuGjoAPREQtMXhUbmN3amc/view?usp=sharing
adb/fastboot tools : https://drive.google.com/file/d/0B1MnFzuGjoAPSVZWVjNCdWlDVGc/view?usp=sharing
Guide : https://dottech.org/21534/how-to-in...ows-computer-for-use-with-your-android-phone/
delete huawei suite. it's sh...t (sorry ). Download firmware .pac b104 file from post #7, extract it, there drivers and tools for device. :good:
amiro13 said:
Extract this zip and paste to your adb/fastboot folder : https://drive.google.com/file/d/0B1MnFzuGjoAPREQtMXhUbmN3amc/view?usp=sharing
adb/fastboot tools : https://drive.google.com/file/d/0B1MnFzuGjoAPSVZWVjNCdWlDVGc/view?usp=sharing
Guide : https://dottech.org/21534/how-to-in...ows-computer-for-use-with-your-android-phone/
delete huawei suite. it's sh...t (sorry ). Download firmware .pac b104 file from post #7, extract it, there drivers and tools for device. :good:
Click to expand...
Click to collapse
Thanks for the recovery! It's very cool :good: :laugh:
I solved my problem by using howto_driver.zip file from this thread.
By the way, did you ever used the firmware .pac b104 in post #7 yourself? Is it working with no problem?
Because I wanted to take a backup of my firmware, but if the .pac file is OK, I guess there's no need to take backup.
Dear XDA Community!
i solved the problem on Umidigi C Note after flashing TWRP and get no touch support.
So, how to solve:
Step One:
Download the SP Flash Tool from Umidigi i uploaded it to my GoogleDrive
Sp Flash Tool
Step Two:
Download the actually Firmware (atm 2017.07.03)
Stock Firmware 03.07.2017
Step Three:
Start the SP Flash Tool and follow these Steps to flash the new Firmware:
Step Four
Download the TWRP Image "C-Note TWRP-3.1.1-0 (created by joe2k01)
https://drive.google.com/file/d/0B3ZtgcXKVN2ARUdTMzV3cFNITXM/view?usp=sharing
Step Five
Flash the TWRP Image
reboot your Phone to Recovery and its done.
Touchsupport should be work.
I understand, but what if we already flashed TWRP onto the phone with adb and didn't flash the scatter?
Hi All
I Have Nokia 3
And Its Briked
I Cant Flash It with SP Flash Tools
Any one Have ANy Idea And Had My Problem And Fix it ?
Phone Not go recovery Mode
But with some method it go in fastboot - but i cant flash it with adb ( waiting for device )
i have download rom from needrom site and in that rom hast 2 zip file and that files has password
anyone can share auth file or securty file in sp flash tools for nokia 3 ?
Please Somebody help me !!!
Try this thread https://forum.xda-developers.com/nokia-3/how-to/nokia-ta-1032-firmware-t3680959
Hey ,
Installthe patched OST LA v6.0.4
and flash the Firmware file extension with .nb0
You can find the tool on Nokia 8 area and here
[ AIO ] Guide TECNO SPARK 8 PRO (KG8) bootloader unlocking,root,twrp & stock firmware## Device specifications
| Device: Tecno spark 8 pro
| Codename:KG8
| SoC: MediaTek Helio G85 (12nm)
| Memory: 4GB/6GB RAM
| Shipped Android version: 11
| Storage: 64/128GB
| Battey : Li-Po 5000 mAh, non-removable
| Build number: KG8-H698CDEFGH-R-GL
Note: Root at your own risk
I am not responsible for any data loss or brick
1. Bootloader Unlocking :
1. Download & install the ADB driver
2. boot unlock zip( Build number check and download )
2.Enable developer mode by taping on Build version(setting->my phone) then enable Oem Unlock & USB debugging from (settings->System->Devloper option)
3. boot unlock zip Extract.
4. Connect Mobile Withe Pc using Data Cable
5.boot unlock folder open & flash.bat click
6.cmd open tyep y and enter
7.phone boot into botloader
8.phone display command boot unlock yes / no
9. phone up volume click
10. phone unlock and phone on
Boot unlock Zip Link:
1.V622
2.V713
3.V722
If you are stuck waiting for the device screen
2. TWRP :https://forum.xda-developers.com/t/tecno-kg8-recovery.4477429/
3. Orange state disabler:
Flashing guide & zip file
Click Wipe →Format Data → Yes → Press Enter.
Then Click Reboot → Recovery (Reboot to Recovery ).
After this, TWRP Recovery Mode will be installed on your phone
Link:
4. Root
1.boot into recovery
2. Flash magisk .zip
llink:Magisk .25.zip
6. Gsi rom / Custom rom Installation guide:https://forum.xda-developers.com/t/custom-rom-installation-for-arm64-a-b-device-other-guide.4477513/
7. Phone Hard Brick fix
7.1. Flash file:
Link :
KG8-H698CDEFGH-R-GL-211217V622
HIT THE THANKS BUTTON IF ABOVE INFORMATION IS HELPFUL TO YOU
custom recovary tuch not work pls fixed it!!! stock farmware not flashing not work!! pls make a video flashing pixel experience rom
make a full video process in youtube
Parvej789 said:
[ AIO ] Guide TECNO SPARK 8 PRO (KG8) bootloader unlocking,root,twrp & stock firmware## Device specifications
| Device: Tecno spark 8 pro
| Codename:KG8
| SoC: MediaTek Helio G85 (12nm)
| Memory: 4GB/6GB RAM
| Shipped Android version: 11
| Storage: 64/128GB
| Battey : Li-Po 5000 mAh, non-removable
| Build number: KG8-H698CDEFGH-R-GL
Note: Root at your own risk
I am not responsible for any data loss or brick
1. Bootloader Unlocking :
1. Download & install the ADB driver
2.Enable developer mode by taping on Build version(setting->my phone) then enable Oem Unlock & usb debugging from (settings->System->Devloper option)
3.Now connect device & open ADB path & run cmd:
command:
adb device
adb reboot bootloader
fastboot flashing unlock
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta_system.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta_vendor.img
fastboot flash boot boot.img
download link :
Your flash file to copy boot .img
vbmeta
If you are stuck waiting for the device screen
2. TWRP :https://forum.xda-developers.com/t/tecno-kg8-recovery.4477429/
3. Orange state disabler:
Flashing guide & zip file
Click Wipe →Format Data → Yes → Press Enter.
Then Click Reboot → Recovery (Reboot to Recovery ).
After this, TWRP Recovery Mode will be installed on your phone
Link:
4. Root
1.boot into recovery
2. Flash magisk .zip
llink:Magisk .25.zip
6. Gsi rom / Custom rom Installation guide:https://forum.xda-developers.com/t/custom-rom-installation-for-arm64-a-b-device-other-guide.4477513/
7. Phone Hard Brick fix
7.1. Flash file:
Link :
KG8-H698CDEFGH-R-GL-210927V249
HIT THE THANKS BUTTON IF ABOVE INFORMATION IS HELPFUL TO YOU
Click to expand...
Click to collapse
My phone is tecno spark 8 pro Kg8 and should i use my verison vb meta file?
Anik111 said:
custom recovary tuch not work pls fixed it!!! stock farmware not flashing not work!! pls make a video flashing pixel experience rom
Click to expand...
Click to collapse
Its working or not in TECNO SPARK 8 PRO KG8-GL
My phone is TECNO spark 8 pro kg8-Gl builder number /KG8-H698CDEFGH-R-GL-220620V722/ it will work in my mobile or not
Ibrahim200675 said:
Its working or not in TECNO SPARK 8 PRO KG8-GL
Click to expand...
Click to collapse
Ok bro
wait some time.
Ibrahim200675 said:
My phone is TECNO spark 8 pro kg8-Gl builder number /KG8-H698CDEFGH-R-GL-220620V722/ it will work in my mobile or not
Click to expand...
Click to collapse
will work.
Bro
Tell me a installation process only plz i cant understand
Tomorrow video uploaded.
Bro
Please wait
Ibrahim200675 said:
Tell me a installation process only plz i cant understand
Click to expand...
Click to collapse
Tomorrow video uploaded.
Bro
Please wait
Parvej789 said:
Tomorrow video uploaded.
Bro
Please wait
Click to expand...
Click to collapse
Ok
Did you make video please give me video link
PLEASE UPLOAD VIDEO OF HOW TO INSTALL TWRP
Where is installation process video people cant install please upload video
Make a video how to install
Where is youtube video hatefully dislike
Ibrahim200675 said:
Make a video how to install
Click to expand...
Click to collapse
Not due to busy work. Inshallah I will give it tomorrow
Parvej789 said:
Not due to busy work. Inshallah I will give it tomorrow
Click to expand...
Click to collapse
Give tomorrow full video iam waitinn from 3 days