Database Info

[Q] Help to choose custom ROM for WT19i

Hey everyone,
I just rooted my WT19i and unlocked bootloader. Because I'm absolutely new in custom ROMs I need your advice helping me to decide which of them I should install on my device. Which is the best?
BTW I already tried installing CM9 using ROM manager, but it said "Installing update..." , then the device rebooted ant stuck on "Sony Ericsson" logo... I had to flash firmware and root my phone again...

Maceee said:
Hey everyone,
I just rooted my WT19i and unlocked bootloader. Because I'm absolutely new in custom ROMs I need your advice helping me to decide which of them I should install on my device. Which is the best?
BTW I already tried installing CM9 using ROM manager, but it said "Installing update..." , then the device rebooted ant stuck on "Sony Ericsson" logo... I had to flash firmware and root my phone again...
Click to expand...
Click to collapse
ROMs for this phone are buggy if you want one with all features working even walkman button try Hibroman (just ask for a link to download)
if you have unlocked bootloader you can see kernels like rage kernel with cpu governors this will increase/improve battery !
It's better to use phone-specific methods for flashing than ROM Manager (some got trouble by this way)
when flashing a ROM that requests to change bootloader be sure to flash it using a laptop on battery -it's better to protect from power problems if something is wrong when flashing bootloader your phone is bricked and only service tools can revive it !
never flash ROMs/ kernels not made for your phone -you are to experiment a hardware failure !

ruscan.calin said:
ROMs for this phone are buggy if you want one with all features working even walkman button try Hibroman (just ask for a link to download)
if you have unlocked bootloader you can see kernels like rage kernel with cpu governors this will increase/improve battery !
It's better to use phone-specific methods for flashing than ROM Manager (some got trouble by this way)
when flashing a ROM that requests to change bootloader be sure to flash it using a laptop on battery -it's better to protect from power problems if something is wrong when flashing bootloader your phone is bricked and only service tools can revive it !
never flash ROMs/ kernels not made for your phone -you are to experiment a hardware failure !
Click to expand...
Click to collapse
Thanks! I guess I'll try installing this ROM and kernel when I have enough time. And two more questions: if I flashed another firmware my bootloader will be locked again and which version of Hybroman should I use?

Maceee said:
Thanks! I guess I'll try installing this ROM and kernel when I have enough time. And two more questions: if I flashed another firmware my bootloader will be locked again and which version of Hybroman should I use?
Click to expand...
Click to collapse
nope your bootloader is not touched by flashing a custom ROM
indeed in some cases you have to flash separately a different bootloader so you can use that custom rom (in fact the problem is that bootloader will not give a chance to that kernel to load into memory -it's about a kind of protection)
wich version ? well as you see that thread is a very long one (and that's a sign of a good one ..) but no links in first post but just ask them your question and you get a link surely

try real ics 5.1 with krsh kernel... its really nice on my wt19i

Did u wipe custom data and cache....???
Did u flash the .img file???
If u didn't then ur phone gets stuck at SE logo...
CM9 is ICS based so first
1. flash ICS
2. flash boot.img file (instde cm-9.0.0-coconut.zip)
3. Enter recovery (turn off ur phone and turn it on by pressing volume down key.)
4. wipe custom data and device cache
5. install cm-9.0.0-coconut.zip
6. reboot...
Ur CM9 will work

xperia miro Stuck on boot after rom flash

hello.first time android user here. i unlocked the bootloader and rooted my phone. installed twrp and flashed this rom Jelly Bean Mini Project Release and SUPER STRIPPED Gapps. wiped dalvic cache and cache. rebooted add i am now stuck on boot. i made a backup of my stock rom with twrp but nothing happens when rebooting the phone and pressing volume down button. where did i go wrong. my phone was on stock firmware 11.0.A.2.10. sorry for my bad English. please help me..

Rakib drh said:
hello.first time android user here. i unlocked the bootloader and rooted my phone. installed twrp and flashed this rom Jelly Bean Mini Project Release and SUPER STRIPPED Gapps. wiped dalvic cache and cache. rebooted add i am now stuck on boot. i made a backup of my stock rom with twrp but nothing happens when rebooting the phone and pressing volume down button. where did i go wrong. my phone was on stock firmware 11.0.A.2.10. sorry for my bad English. please help me..
Click to expand...
Click to collapse
So if I understand this correctly you have flashed a new ROM but you are stuck on the boot screen.
This can happen due to a few things; the first and most obvious to me is that you didn't flash the correct version of the ROM. Please link me to the ROM you used and I can tell you if you did or not.
The second is that you aren't running the correct kernel, if the JB Mini Project runs on the CM10 kernel and you haven't flashed that first it won't work.
The third is that you didn't wipe all of the partitions (it seems as though you haven't) you need to wipe System, Dalvik Cache, Cache, then User Data.
If you want to restore to stock firmware download this program (http://androxyde.github.io/) and then download the .ftf file from one of the links in the link I will provide (http://pastebin.com/raw.php?i=fU3SBnQr).
When you have got both of them things PM me and I will help you.

Rakib drh said:
hello.first time android user here. i unlocked the bootloader and rooted my phone. installed twrp and flashed this rom Jelly Bean Mini Project Release and SUPER STRIPPED Gapps. wiped dalvic cache and cache. rebooted add i am now stuck on boot. i made a backup of my stock rom with twrp but nothing happens when rebooting the phone and pressing volume down button. where did i go wrong. my phone was on stock firmware 11.0.A.2.10. sorry for my bad English. please help me..
Click to expand...
Click to collapse
Hi, i also experienced this before. I just flash it using Flashtool [androxyde.github.io] and now my phone is coming back like usual. First, download your Stock Firmware, and flash it. CMIIW

gamer649 said:
So if I understand this correctly you have flashed a new ROM but you are stuck on the boot screen.
This can happen due to a few things; the first and most obvious to me is that you didn't flash the correct version of the ROM. Please link me to the ROM you used and I can tell you if you did or not.
The second is that you aren't running the correct kernel, if the JB Mini Project runs on the CM10 kernel and you haven't flashed that first it won't work.
The third is that you didn't wipe all of the partitions (it seems as though you haven't) you need to wipe System, Dalvik Cache, Cache, then User Data.
If you want to restore to stock firmware download this program (http://androxyde.github.io/) and then download the .ftf file from one of the links in the link I will provide (http://pastebin.com/raw.php?i=fU3SBnQr).
When you have got both of them things PM me and I will help you.
Click to expand...
Click to collapse
i flashed this ROM: http://forum.xda-developers.com/showthread.php?t=2293851. i was on stock kernel when i flashed this ROM. i didn't knew that i have to flash a custom kernel. if i flash it now will it fix this problem. could you please give the link of cm10 kernel for Miro.
i downloaded the tool and downloading the ftf file now . i don't know how to PM. would you please tell me how to do that?

Rakib drh said:
i flashed this ROM: http://forum.xda-developers.com/showthread.php?t=2293851. i was on stock kernel when i flashed this ROM. i downloaded the tool and downloading the ftf file now . i don't know how to PM. would you please tell me how to do that also?
Click to expand...
Click to collapse
I know the exact problem now. The ROM is based on CM10. You haven't flashed the CM10 kernel onto the phone before you flashed the ROM. I'll PM you know so you can reply if you need any help.
---------- Post added at 03:52 PM ---------- Previous post was at 03:22 PM ----------
Rakib drh said:
i flashed this ROM: http://forum.xda-developers.com/showthread.php?t=2293851. i was on stock kernel when i flashed this ROM. i didn't knew that i have to flash a custom kernel. if i flash it now will it fix this problem. could you please give the link of cm10 kernel for Miro.
i downloaded the tool and downloading the ftf file now . i don't know how to PM. would you please tell me how to do that?
Click to expand...
Click to collapse
Download the FXP CM10 version 218 from this link (http://uploaded.net/file/rwdt97g6/from/0cedff) and extract the boot.img from the .zip you download. Google how to fastboot flash kernels as I can't help you here.

i downloaded the flashtool and the stock firmware. but how to connect Miro on flash mode? Also I intalled Twrp over Cwm But When i go to recovery CWM shows up. How to Get back to TWRP as i have also made a backup with it.

Rakib drh said:
i downloaded the flashtool and the stock firmware. but how to connect Miro on flash mode? Also I intalled Twrp over Cwm But When i go to recovery CWM shows up. How to Get back to TWRP as i have also made a backup with it.
Click to expand...
Click to collapse
Phone is back to normal. just flashed the stock firmware. thank you everyone.

Rakib drh said:
Phone is back to normal. just flashed the stock firmware. thank you everyone.
Click to expand...
Click to collapse
how did you that... i need a step by step procedure to ....

Fastboot flash boot.img or any kernel that has recovery and flash a rom

stuck on jb mini project
gamer649 said:
So if I understand this correctly you have flashed a new ROM but you are stuck on the boot screen.
my PM is 0130-BV
Click to expand...
Click to collapse

steps to setup Custom Rom !!!

Hi guys
at first thanks for time you spend to read my problam :angel:
i have Samsung Galaxy SL i9003
and i still work on 2.3.6 and i hate it and it's very and super lagy :crying:
i know how to setup stock rom from odin , it's very easy
but i really can't get how setup custom rom
andi don't know any thing about custom rom ,
and hope any one tell me how to do and explan it to me simpely , not good in english
and tell me the best custom rom that i can use it every day and work fine and fast , and get links for me
i speak arabic & i'm not good in english , sorry for my bad english guys

All custom roms for android 4.x have few bugs. So, if you are okay with that, I will suggest installing CM11. It works nice except for few bugs here and there.
But, if you prefer a fully stable rom, you have to stick with android 2.3.6. In that case, I will suggest FlyOnGB rom. Also, you can try doing a factory reset and see if that helps.
CM11: http://forum.xda-developers.com/showthread.php?t=2534312
FlyOnGB: http://forum.xda-developers.com/showthread.php?t=2353292
As for setting up odin, you can use it only to install md5 or tar files. nearly all custom rom are uploaded as zip file, and are to be flashed from recovery mode. You will need to copy the zip file to phone, and boot into recovery using Vol Up + Home + Power key. Of course, you will need to root your phone to go into recovery mode.

jitendragarg said:
All custom roms for android 4.x have few bugs. So, if you are okay with that, I will suggest installing CM11. It works nice except for few bugs here and there.
But, if you prefer a fully stable rom, you have to stick with android 2.3.6. In that case, I will suggest FlyOnGB rom. Also, you can try doing a factory reset and see if that helps.
CM11: http://forum.xda-developers.com/showthread.php?t=2534312
FlyOnGB: http://forum.xda-developers.com/showthread.php?t=2353292
As for setting up odin, you can use it only to install md5 or tar files. nearly all custom rom are uploaded as zip file, and are to be flashed from recovery mode. You will need to copy the zip file to phone, and boot into recovery using Vol Up + Home + Power key. Of course, you will need to root your phone to go into recovery mode.
Click to expand...
Click to collapse
thanks for answer me , really thanks ,
and i was ask u something i can't understand
1- how to root it ? and file please ?
2 in links that u put to me i see download links and Google Apps , what google apps do ? and how to flash it and when ?
thanks again , waiting replay

a7med $oft said:
thanks for answer me , really thanks ,
and i was ask u something i can't understand
1- how to root it ? and file please ?
2 in links that u put to me i see download links and Google Apps , what google apps do ? and how to flash it and when ?
thanks again , waiting replay
Click to expand...
Click to collapse
Custom roms are already rooted, so you don't need to do anything on them. To root a stock rom, you need to flash the cf-root for that particular rom, and then restart the phone. Use this link to download the cf-root file. http://forum.xda-developers.com/showthread.php?t=1331253
To flash the cf-root file, first you need to flash the stock rom, and restart the phone. Then you can use Odin to flash the cf-root just like you flash a rom.
Google apps are your default android apps (play music, maps, google search and such). You don't need these necessarily, as you can download them from play store too. Few roms have bugs with play store apps, therefore they give you modified version of them in that thread.
If you want to flash the google apps, you can do it just like you do it for custom rom. After installing custom rom, just reboot to recovery mode. Now, select the google apps zip file, and install it the same way you installed the custom rom.
If you are stuck, follow the steps from those link as it is. Use this link for more help. http://forum.xda-developers.com/showthread.php?t=1894737

[Q] Problems after flashing ROM-Samsung Tab 3 sm-t311

Hi, I have bought a samsung tab 3 sm-t311 in China and since they everything related to google, I rooted it and installed CWM,
I installed this rom here with CWM: http://forum.xda-developers.com/showthread.php?t=2404877
Installation was successful but I get this messages when launching my device:
- setup wizard isn't responding. Do you want to close it?
I close it, then:
- Unfortunately, the process android.process.media has stopped.
I press ok, then:
Unfortunately, Samsung keyboard has stopped.
I press ok then:
- Process system isn't responding. Do you want to close it?
I press ok
And it keeps coming back over and over...
What should I do?

Backup
anthony239 said:
Hi, I have bought a samsung tab 3 sm-t311 in China and since they everything related to google, I rooted it and installed CWM,
I installed this rom here with CWM: http://forum.xda-developers.com/showthread.php?t=2404877
Installation was successful but I get this messages when launching my device:
- setup wizard isn't responding. Do you want to close it?
I close it, then:
- Unfortunately, the process android.process.media has stopped.
I press ok, then:
Unfortunately, Samsung keyboard has stopped.
I press ok then:
- Process system isn't responding. Do you want to close it?
I press ok
And it keeps coming back over and over...
What should I do?
Click to expand...
Click to collapse
try fixing permissions in cwm/twrp ,if it does not help then restore your nandroid backup or ask the rom developer for the problem..
it might help you

roshan77ss said:
try fixing permissions in cwm/twrp ,if it does not help then restore your nandroid backup or ask the rom developer for the problem..
it might help you
Click to expand...
Click to collapse
Hi, thanks for replying. I cannot post in the topic of the rom because I am new on the forum (what I get when I try to post something overthere).
Could you please explain me how to fix the permissions in CWM?
I am a beginner who been trying to fix his tablet for a week now, but I still dont understand everything since I cant put all my time on it... If its not about following tutorials step by step, i am lost...

I also tried the fast team one, without any success, when the rom is installed and the device is rebooted, this time the screen stay blocked on "samsung galaxy tab3" for years!!!

sorry, i meant the fast dream rom

I just tried to Flash three roms from sammobile.com (one from hong-kong, one from spain and one from germany) through Odin.
Everytime I get I click on AP to load the rom on odin, I get this message:"md5 error! Binary is invalid".
Since I have rooted the tablet using odin to instal CWM, when I boot the tablet in download mode, I can see:
- PRODUCT NAME: SM-T311
- CURRENT BINARY: Cusom
- SYSTEM STATUS: Custom
Is it related? Someone help plz...

The question is do i really have to install a new rom, now that the tablet is rooted with CWM on it, can't do any manipulation to allow the chinese rom to accept google playstore etc...
My biggest problem with the chinese rom that comes with it is that i cant install download google playstore, i installed it but everytime i open it, it closes right away. Not google nor other google apps available neither since it was sold in china...

anthony239 said:
Hi, thanks for replying. I cannot post in the topic of the rom because I am new on the forum (what I get when I try to post something overthere).
Could you please explain me how to fix the permissions in CWM?
I am a beginner who been trying to fix his tablet for a week now, but I still dont understand everything since I cant put all my time on it... If its not about following tutorials step by step, i am lost...
Click to expand...
Click to collapse
You should be able to post on ROM forum now(as you've reached 10 posts.
And the fix permissions option should be in 'advanced' section in CWM(not sure, I use TWRP recovery)

The Dork Knight Rises said:
You should be able to post on ROM forum now(as you've reached 10 posts.
And the fix permissions option should be in 'advanced' section in CWM(not sure, I use TWRP recovery)
Click to expand...
Click to collapse
Yea im able to post over there now, thx

backup
anthony239 said:
The question is do i really have to install a new rom, now that the tablet is rooted with CWM on it, can't do any manipulation to allow the chinese rom to accept google playstore etc...
My biggest problem with the chinese rom that comes with it is that i cant install download google playstore, i installed it but everytime i open it, it closes right away. Not google nor other google apps available neither since it was sold in china...
Click to expand...
Click to collapse
dont you have cwm backup? if not then flash stock firmware ,find proper odin flashable packages for your device.
always make backup before flashing any rom.

anthony239 said:
Yea im able to post over there now, thx
Click to expand...
Click to collapse
So, could the devs help??
(<---And you don't need to say thanks and spam the thread, that what the button's for)

The Dork Knight Rises said:
So, could the devs help??
(<---And you don't need to say thanks and spam the thread, that what the button's for)
Click to expand...
Click to collapse
In the end, I just used a previous version of Odin (3.4 instead of 3.9) to flash an original stock rom.
Now the problem is that I have a new CWM that works with the volume up, volume down button, and this menu:
- reboot system now
- apply update from ADB
- apply update from external storage
- zipe data/factory reset
- wipe cache partition
- apply update from cache
Since the rom is not really good, i wanted to flash another one (one of those we just talked about), but the backup i did with the previous CWM i had (Philz Advanced CWM 6.08.90) is nowhere in the tablet anymore (i dont have any sd card) and i dont know how to make a back up with this CWM...
So now the question is how to make a backup with this version of CWM so I can try to flash other roms, or how to get the version that i had before without takin any risk of brickin the device (so i can make another backup and try to flash another)

anthony239 said:
In the end, I just used a previous version of Odin (3.4 instead of 3.9) to flash an original stock rom.
Now the problem is that I have a new CWM that works with the volume up, volume down button, and this menu:
- reboot system now
- apply update from ADB
- apply update from external storage
- zipe data/factory reset
- wipe cache partition
- apply update from cache
Since the rom is not really good, i wanted to flash another one (one of those we just talked about), but the backup i did with the previous CWM i had (Philz Advanced CWM 6.08.90) is nowhere in the tablet anymore (i dont have any sd card) and i dont know how to make a back up with this CWM...
So now the question is how to make a backup with this version of CWM so I can try to flash other roms, or how to get the version that i had before without takin any risk of brickin the device (so i can make another backup and try to flash another)
Click to expand...
Click to collapse
Are you sure the new recovery is CWM and not stock recovery?? If you flashed stock ROM, it should've given you stock recovery again...
(Does it show the CWM hat logo in the background?)

The Dork Knight Rises said:
Are you sure the new recovery is CWM and not stock recovery?? If you flashed stock ROM, it should've given you stock recovery again...
(Does it show the CWM hat logo in the background?)
Click to expand...
Click to collapse
Actually, yea its the stock recovery, so should i reroot the phone to install CWM, make a backup just in case, flash another stock rom which i find better, and then try to flash this one in recovery mode?

anthony239 said:
Hi, I have bought a samsung tab 3 sm-t311 in China and since they everything related to google, I rooted it and installed CWM,
I installed this rom here with CWM: http://forum.xda-developers.com/showthread.php?t=2404877
Installation was successful but I get this messages when launching my device:
- setup wizard isn't responding. Do you want to close it?
I close it, then:
- Unfortunately, the process android.process.media has stopped.
I press ok, then:
Unfortunately, Samsung keyboard has stopped.
I press ok then:
- Process system isn't responding. Do you want to close it?
I press ok
And it keeps coming back over and over...
What should I do?
Click to expand...
Click to collapse
Try fix or patch.
Or come back to stock rom.

anthony239 said:
Actually, yea its the stock recovery, so should i reroot the phone to install CWM, make a backup just in case, flash another stock rom which i find better, and then try to flash this one in recovery mode?
Click to expand...
Click to collapse
Yup, I think you'd better to start over again. Try take a look at this : http://forum.xda-developers.com/showthread.php?t=2401901
It works well for my SM-T311 :good: Then you can reroot and make a backup from TWRP easily.
I also suggest you to take a look at this too : http://forum.xda-developers.com/showthread.php?t=2522091 From there, you can get PhilZ touch recovery based on CWM v.6.0.4.5

anthony239 said:
Actually, yea its the stock recovery, so should i reroot the phone to install CWM, make a backup just in case, flash another stock rom which i find better, and then try to flash this one in recovery mode?
Click to expand...
Click to collapse
That's right, look at @Ferris Cruiser's post above. Should help.
(<---Remember to thank him and me if this helps.:good

Ok, my problem is resolved now.
- I had to use the previous version of Odin (3.4) to flash a rom from sammobile.com
- Then, I rooted the phone, reinstalling CWM philz version
- I did a backup using CWM
- Finally I flashed the custom rom using CWM
Thank u all for helping

anthony239 said:
Ok, my problem is resolved now.
- I had to use the previous version of Odin (3.4) to flash a rom from sammobile.com
- Then, I rooted the phone, reinstalling CWM philz version
- I did a backup using CWM
- Finally I flashed the custom rom using CWM
Thank u all for helping
Click to expand...
Click to collapse
Glad to help! :good:

HELP
I bought a Samsung Galaxy Tab 3 SM-T311 in Mainland China last month and I cannot install google play can anyone help.

Cannot get past bootloop when installing roms - D2403

Hi everybody!
I have spent the whole day trying to install Slimrom on my Sony M2 aqua D2403, and after I didn't succeed, I also tried cyanogenmod 12.1. I am already past the state of going crazy!! I hope somebody can help me
So, what happens is that after a lot of time I finally got TWRP to work and was able to install the custom roms (I'm a semi-noob, as I have installed custom roms on my old Sony M, but am still not very knowledgable).
I am getting bootloop on both roms that I have tried today, and I have tried it MANY times. Have flashed stock rom with flashtool by Androxyde several times and tried from there (Android 5.1.: 18.6.A.0.175, as well as Android 4.4.: 18.3.1.C.1.17) .
I followed pawcioo132's instruction from the slimrom forum: Quote:
1. Recommend to start at stock LP.
2. Update bootloader via Emma.
3. Flash recovery via fastboot (each i recommend).
4. Full wipe (cache, data, dalvic cache, system)
5. Flash latest ROM.
6. Enjoy.
Part 1 I have already mentioned here.
Part 2 seems to not be possible with the M2 aqua. At least Emma tells there are no services for my device.
So, I found a solution that at least let me enter recovery mode. What I did is i flashed (with flashtool) the FTF made by linuxct (from this post http://forum.xda-developers.com/xperia-m2/development/twrp-2-8-7-0-updated-theme-t3252807), which is supposed to be the same as updating the bootloader through Emma.
Part 3-5 was no problem. Everything went fine (after I succeeded in finding the FTF file mentioned above - which took like 7 hours or so).
The only thing that didn't work was part 6. I have bootloop every time. The boot animation just stays forever (I have tried up to 50 minutes) on both roms I have tried.
Was it maybe because of what I did in part 2?
Does anybody have any idea what I can do? Maybe someone who has succeeded in installing a custom rom for the D2403 could tell me what they did differently or something like that.
This is my first post here. I have done my best to give all relevant information. If there is any important info missing, please tell me!!
The Roms I have tried are
- Slimrom custom 2 from http://forum.xda-developers.com/xperia-m2/orig-development/5-1-1-slimrom-xperia-m2-lte-t3244761
- CM 12.1 beta 2 from http://forum.xda-developers.com/xperia-m2/orig-development/rom-cyanogenmod-12-developement-t2971213
Thanks in advance for any help!

micsras said:
Hi everybody!
I have spent the whole day trying to install Slimrom on my Sony M2 aqua D2403, and after I didn't succeed, I also tried cyanogenmod 12.1. I am already past the state of going crazy!! I hope somebody can help me
So, what happens is that after a lot of time I finally got TWRP to work and was able to install the custom roms (I'm a semi-noob, as I have installed custom roms on my old Sony M, but am still not very knowledgable).
I am getting bootloop on both roms that I have tried today, and I have tried it MANY times. Have flashed stock rom with flashtool by Androxyde several times and tried from there (Android 5.1.: 18.6.A.0.175, as well as Android 4.4.: 18.3.1.C.1.17) .
I followed pawcioo132's instruction from the slimrom forum: Quote:
1. Recommend to start at stock LP.
2. Update bootloader via Emma.
3. Flash recovery via fastboot (each i recommend).
4. Full wipe (cache, data, dalvic cache, system)
5. Flash latest ROM.
6. Enjoy.
Part 1 I have already mentioned here.
Part 2 seems to not be possible with the M2 aqua. At least Emma tells there are no services for my device.
So, I found a solution that at least let me enter recovery mode. What I did is i flashed (with flashtool) the FTF made by linuxct (from this post http://forum.xda-developers.com/xperia-m2/development/twrp-2-8-7-0-updated-theme-t3252807), which is supposed to be the same as updating the bootloader through Emma.
Part 3-5 was no problem. Everything went fine (after I succeeded in finding the FTF file mentioned above - which took like 7 hours or so).
The only thing that didn't work was part 6. I have bootloop every time. The boot animation just stays forever (I have tried up to 50 minutes) on both roms I have tried.
Was it maybe because of what I did in part 2?
Does anybody have any idea what I can do? Maybe someone who has succeeded in installing a custom rom for the D2403 could tell me what they did differently or something like that.
This is my first post here. I have done my best to give all relevant information. If there is any important info missing, please tell me!!
The Roms I have tried are
- Slimrom custom 2 from http://forum.xda-developers.com/xperia-m2/orig-development/5-1-1-slimrom-xperia-m2-lte-t3244761
- CM 12.1 beta 2 from http://forum.xda-developers.com/xperia-m2/orig-development/rom-cyanogenmod-12-developement-t2971213
Thanks in advance for any help!
Click to expand...
Click to collapse
If u did all of this and didn't work, you probably have a D2403 with GPIO problem.
There is a lib file to remove to workaround this, but somethings don't work if u do this
(Sorry for bad english)

PauloHHB said:
If u did all of this and didn't work, you probably have a D2403 with GPIO problem.
There is a lib file to remove to workaround this, but somethings don't work if u do this
(Sorry for bad english)
Click to expand...
Click to collapse
Thanks a lot, Paulo! Your post made me read a lot about gpio and in the end I decided to try to install the z5 s.t.y.l.e rom by linuxct. It is running perfectly and I am more than satisfied with it. Amazing! Thanks again!