I used Casual on my device today and I need help. I ran casual and rooted first then secondly ran the script to install insecure aboot to unlock bootloader. the program said this was successful. I then ran script to install cwm recovery. After rooting successfully and then "supposedly successfully" unlocking bootloader and flashing cwm recovery my phone would not boot to cwm but rather booted to stock recovery. since the casual didnt work for cwm after several tries I downloaded Rom manager from play store and used it to flash cwm touch. After this my device will not boot to recovery and gives me the error message from vzw for unauthorized software. Take your device to a vzw store it says. Please help me.
dmiller15 said:
I used Casual on my device today and I need help. I ran casual and rooted first then secondly ran the script to install insecure aboot to unlock bootloader. the program said this was successful. I then ran script to install cwm recovery. After rooting successfully and then "supposedly successfully" unlocking bootloader and flashing cwm recovery my phone would not boot to cwm but rather booted to stock recovery. since the casual didnt work for cwm after several tries I downloaded Rom manager from play store and used it to flash cwm touch. After this my device will not boot to recovery and gives me the error message from vzw for unauthorized software. Take your device to a vzw store it says. Please help me.
Click to expand...
Click to collapse
First thing you need to do is Odin back to stock. Then reroot the exact same way you did with casual, and try all the same steps again.
Next, install ez unlock version 1.2 to make sure your bootloader is unlocked. It's pretty self explanatory, just hit unlock and it's done.
After that you should be good to go, no more triangles telling you to bring the phone to Verizon.
Sent from my SCH-I535 using Tapatalk 2
odin
Thank you. I couldn't find ez unlock through play store so i downloaded the apk and installed from pc. after that i was rooted unlocked and back in action in minutes. Again thank you. this is my first attempt at customizing a device so i thought I crashed hard right after takeoff. :good:
having problems installing 10.1.3 on verizon sgs3
installed cm-10.1.3-d2vzw and gapps-jb-20130812-signed onto my sd card and wipe data/factory reset, then wipe cache partition, then wipe delvic cache
when i select to reboot device it doesn't reboot at all. it buzzes and it flashes the samsung logo for a quick second and then back to a blank screen.
i tried to do 10.1.2 with gapps 20130301 and it worked fine
anyone have any advise?
thank you!
jdowell362 said:
having problems installing 10.1.3 on verizon sgs3
installed cm-10.1.3-d2vzw and gapps-jb-20130812-signed onto my sd card and wipe data/factory reset, then wipe cache partition, then wipe delvic cache
when i select to reboot device it doesn't reboot at all. it buzzes and it flashes the samsung logo for a quick second and then back to a blank screen.
i tried to do 10.1.2 with gapps 20130301 and it worked fine
anyone have any advise?
thank you!
Click to expand...
Click to collapse
this almost matches what happened to me when i first tried and it was because i wasn't successful unlocking my bootloader. Are you able to boot into recovery?
I had trouble running the new release of CM and That particular gapps also but have since switched to first Liquidsmooth and then slimrom and paranoid and all worked just fine with no changes in procedure. So im not sure what could have been wrong. im using the august gapps file with a paranoid rom now and it works wonderfully.
dmiller15 said:
this almost matches what happened to me when i first tried and it was because i wasn't successful unlocking my bootloader. Are you able to boot into recovery?
Click to expand...
Click to collapse
yeah i was able to boot in recovery. that was really the only way i was able to fix my phone. i just wiped it all over again and throw on my last working version of cm10. then i updated to the newest stable version through the cm10 updater itself, not through CWM.
Related
Problem: After installing CWM, the phone won't boot fully. It goes to the HTC screen (with some new red text about this being a development-only build) and then reboots to the same screen over and over.
What I've done based on what I've read here:
Cleared the caches in fastboot and rebooted.
Run the unlock token script again.
Installed TWRP, wiped everything.
Attempted to flash CM9 through TWRP (fails).
Attempted to install Scott's Roms 1.85 ROM throught TWRP (failed).
Reinstalled CWM to try to flash Scott's 1.85, but CWM will not go into recovery mode (just goes to the HTC screen and starts boot loop again).
Attempted to install CM9 and Scott's 1.85 through flashboot, no luck because of missing text files (am I using the wrong package?).
Factory reset just takes me to TWRP, and when I try to factory reset from there it goes back into bootloop.
What does work:
I can get to Fastboot on phone.
With TWRP installed, I can into TWRP recovery.
Does anyone have any thoughts on this?
Thanks.
makanai said:
Problem: After installing CWM, the phone won't boot fully. It goes to the HTC screen (with some new red text about this being a development-only build) and then reboots to the same screen over and over.
What I've done based on what I've read here:
Cleared the caches in fastboot and rebooted.
Run the unlock token script again.
Installed TWRP, wiped everything.
Attempted to flash CM9 through TWRP (fails).
Attempted to install Scott's Roms 1.85 ROM throught TWRP (failed).
Reinstalled CWM to try to flash Scott's 1.85, but CWM will not go into recovery mode (just goes to the HTC screen and starts boot loop again).
Attempted to install CM9 and Scott's 1.85 through flashboot, no luck because of missing text files (am I using the wrong package?).
Factory reset just takes me to TWRP, and when I try to factory reset from there it goes back into bootloop.
What does work:
I can get to Fastboot on phone.
With TWRP installed, I can into TWRP recovery.
Does anyone have any thoughts on this?
Thanks.
Click to expand...
Click to collapse
Uhhhhh...try to relock your bootloader (fastboot oem lock) and run an RUU. You'll go back to stock. Then follow these steps:
1. Re-unlock your bootloader using the same unlock token you used before
2. Flash TWRP from fastboot (or a one-click)
3. Reboot into TWRP
4. Mount storage and put whatever rom you want into whatever folder you want on the sdcard (CM9 Alpha 5, CleanROM, AOKP M6.2, etc etc)
5. Factory Reset
6. Flash the rom and anything that needs to go with the rom (like Gapps if you're flashing CM9 or AOKP)
7. Reboot and enjoy, be sure to update your SU binaries immediately after booting by opening up the SuperUser app
Also, do not use CWM, our device is not officially supported by the CWM team. Only TWRP is an officially supported recovery for our HOX.
stnguyen09 said:
Uhhhhh...try to relock your bootloader (fastboot oem lock) and run an RUU. You'll go back to stock. Then follow these steps:
1. Re-unlock your bootloader using the same unlock token you used before
2. Flash TWRP from fastboot (or a one-click)
3. Reboot into TWRP
4. Mount storage and put whatever rom you want into whatever folder you want on the sdcard (CM9 Alpha 5, CleanROM, AOKP M6.2, etc etc)
5. Factory Reset
6. Flash the rom and anything that needs to go with the rom (like Gapps if you're flashing CM9 or AOKP)
7. Reboot and enjoy, be sure to update your SU binaries immediately after booting by opening up the SuperUser app
Also, do not use CWM, our device is not officially supported by the CWM team. Only TWRP is an officially supported recovery for our HOX.
Click to expand...
Click to collapse
Worked. I had to leave town for a week as I was reading your reply stnguyen, so I didn't get a chance to try it until I got home tonight. I'm up and running again. Thanks a ton!
I used Hasoon2000's HTC All-In-One Kit to root my phone. That all worked.
The issue came when i flashed a new kernel. I placed the boot.img from King Kang's new ROM (http://forum.xda-developers.com/showthread.php?t=1959099)
Anyway, When i boot I get the HTC, quietly brilliant logo, and this in red letters "This build is for development purposes only. Do not distrubute... "
i can boot into recovery (pwr+ vol down)
And i get the ***TAMPERED*** AND ***unlocked*** tags at the top
I don't know where to go from here...
Thanks for the help.
Also, whenever i boot into recovery or factory reset, neither succeed.
This was probably known info, just wanted to add it.
ccamwilkins said:
Also, whenever i boot into recovery or factory reset, neither succeed.
This was probably known info, just wanted to add it.
Click to expand...
Click to collapse
You mentioned in your original post that you could boot into recovery, so is that not working now? Factory reset might've fubared the recovery piece, so you could do one of two things:
1) download the original RUU version for your phone, relock your phone, and flash the RUU and start over.
2) try reinstalling TWRP.
This whole thing sounds like trying to install a kernel or fastboot flash a boot.img without SuperSU correctly installed. This is what happened to me when I first unlocked my phone and tried to fastboot flash the CM10 boot.img after failing the flash from recovery twice. Without that super-user permission, bad things tend to happen. If you decide to continue on with reinstalling TWRP, make sure SuperSU.zip is flashed successfully from
TWRP, then try your rom/kernel combination again (or even a different combination if you're apprehensive).
BEWARE: sometimes partially flashing these things can corrupt your sd card. I had to reflash the original RUU to fix my phone BEFORE I rerooted and flashed a rom/kernel.
Have you fastbooted a SU to your phone after you rooted and unlocked? I'd imagine you did if you followed the toolkit.. So your on 2.20... Just download cleanrom 5.1 on your computer. Mount sdcard via recovery and drag cleanrom onto phone. Flash entire rom in recovery. I bet it works
Once your on a stable rom, download king kang from your phone. Download flashgui. Open flashgui app, navigate to king kang and let it find the boot img and flash it for you.. Once successful, immediately boot into recovery and flash entire rom through twrp.
Success
Sent from my One X using Tapatalk 2
Hello all,
Last night I was trying to install the latest Gummy release on my Verizon Galaxy S3. This was the first time I have tried to flash a rom on this phone. It failed, and I rebooted my phone, and now it will only boot into the clockwork recovery.
I thought it may have been damaged as i was transferring the file to the device. I had an SD card in my droid X, So I put it in my Galaxy and formatted it with clockwork. Then I transferred the gummy release (that I also re-downloaded) from my computer to the SD card via a memory card reader. I put it in my Galaxy and tried to install the release, and it gave me a different error
Code:
E: Can't Open /external_sd/Gummy-2.1-01-09-14-NIGHTLY-d2vzw.zip
(bad)
Installation aborted.
Edit: Tried a few other roms and they had the same issue, but Cyanogen Mod 10.2 worked. Anybody have any guesses why?
Edit2: Further developments, Trying to do the latest nightly fir the CM yields the same issue that Gummy's release gave me initially. It reports as follows:
Code:
E: Error in /external_sd/cm-11-20140110NIGHTLY-d2vzw.zip
(Status 7)
Installation aborted
Is there possibly a firmware issue at play?
Did u unlocked ur recovery. And if ur trying to flash a KITKAT rom u need the latest clockwork recovery
I'm having this exact issue except I currently have TWRP 2.6.3. I wiped data, cache and internal and it actually booted the below ROM (the first boot) but once I got everything setup and rebooted the device it will not boot beyond recovery. It hangs on the Samsung boot logo. I've tried to restore to a 4.1.2 ROM as well as install 4.3 and 4.1.2 again multiple times but they will not boot. Any direction would be appreciated.
http://forum.xda-developers.com/showthread.php?t=2601536
twistedillutions said:
Did u unlocked ur recovery. And if ur trying to flash a KITKAT rom u need the latest clockwork recovery
Click to expand...
Click to collapse
Sorry, forgot to mention, I did unlock with EZunlock. Would the clockwork on the play store be the latest one, or is there another place with more up to date versions?
Cappurnikus said:
I'm having this exact issue except I currently have TWRP 2.6.3. I wiped data, cache and internal and it actually booted the below ROM (the first boot) but once I got everything setup and rebooted the device it will not boot beyond recovery. It hangs on the Samsung boot logo. I've tried to restore to a 4.1.2 ROM as well as install 4.3 and 4.1.2 again multiple times but they will not boot. Any direction would be appreciated.
http://forum.xda-developers.com/showthread.php?t=2601536
Click to expand...
Click to collapse
Do you get the same error on install that I'm getting, ro are the installs finishing, but not booting?
Try goo manager or ez-recovery to install the latest recovery
right now i can think of
factory reset format data. Make sure u backup ur internal
Wen changing from rom to rom is a good thing to do a clean install
get the right gapps.
The 1st boot always takes time at least on me.
Sorry i cant think of more helpful things.. Been drinking
Looks like my recovery just needed an update. Thanks everyone.
Sent from my Nexus 7 using Tapatalk
Confirmed also an old recovery for me as well. Thank you very much!
Hi guys,
I'm running my Moto G 16GB on Kitkat 4.4.2 system version 175.44.1.falcon_umts.Retail.en.DE. Today it offered to download and install the latest OTA update (called 176.44.1.en.DE). I started the download and tried to install it.
After downloading the update was placed in /cache. The file name was 'Blur_Version.175.44.1.falcon_umts.Retail.en.DE.zip', which surprised me. I was expecting something like 'Blur_Version.176.44.1.falcon_umts.Retail.en.DE.zip'.
When I tried to install it without removing root and without going back to stock recovery it ended with a signature error in CWM. Installing the untrusted zip manually didn't work as well - as expected.
Then I tried to follow advise from other threads and went back to stock recovery (extracted from a full install package 'Blur_Version.175.44.1.falcon_umts.Retail.en.DE' - 444MB) That seemed to work and the install of the OTA update went fine before getting stuck on the boot animation on the first boot. It sat there for 10 minutes before I rebooted and restored a CWM backup.
I'm running out of ideas. Some say it's sufficient to go back to stock recovery temporarily. Others say you need to go back to full stock.
I have to repeat that I'm rooted and that I've de-activated a few unused apps (mainly harmless google stuff (hangout, search, music and so on) and Motorola Assist, Migrate and 'Context Services') .
Are there further findings about what stops the OTA from succeeding?
Many thanks in advance,
Kleo2
Kleo2 said:
Hi guys,
I'm running my Moto G 16GB on Kitkat 4.4.2 system version 175.44.1.falcon_umts.Retail.en.DE. Today it offered to download and install the latest OTA update (called 176.44.1.en.DE). I started the download and tried to install it.
After downloading the update was placed in /cache. The file name was 'Blur_Version.175.44.1.falcon_umts.Retail.en.DE.zip', which surprised me. I was expecting something like 'Blur_Version.176.44.1.falcon_umts.Retail.en.DE.zip'.
When I tried to install it without removing root and without going back to stock recovery it ended with a signature error in CWM. Installing the untrusted zip manually didn't work as well - as expected.
Then I tried to follow advise from other threads and went back to stock recovery (extracted from a full install package 'Blur_Version.175.44.1.falcon_umts.Retail.en.DE' - 444MB) That seemed to work and the install of the OTA update went fine before getting stuck on the boot animation on the first boot. It sat there for 10 minutes before I rebooted and restored a CWM backup.
I'm running out of ideas. Some say it's sufficient to go back to stock recovery temporarily. Others say you need to go back to full stock.
I have to repeat that I'm rooted and that I've de-activated a few unused apps (mainly harmless google stuff (hangout, search, music and so on) and Motorola Assist, Migrate and 'Context Services') .
Are there further findings about what stops the OTA from succeeding?
Many thanks in advance,
Kleo2
Click to expand...
Click to collapse
If your phone is rooted or there is a CWM installed or there is any change in system files then ota will fail till you flash stock rom. You can't just bring back stock recovery. You have to "delete" root as well.
There is some info http://forum.xda-developers.com/showpost.php?p=47495650&postcount=6
I will post my case here, I had the same problem, I had CWM and root and when I rebooted to update I get installation failed and boot loop.
Then I just flashed stock recovery (only) rebooted and now I already have the update installed
CromoPT said:
I will post my case here, I had the same problem, I had CWM and root and when I rebooted to update I get installation failed and boot loop.
Then I just flashed stock recovery (only) rebooted and now I already have the update installed
Click to expand...
Click to collapse
Hi, thanks for your replies. Because of your report and others, who state the same (installing stock recovery only to get the update working) I was hoping to get around going back to full stock. It always takes a lot of time to configure the phone the way it was configured before essentially wiping.
Just to repeat what I did: when I try to install the OTA while CWM is installed there's just an error message in CWM, the update fails, but the phone is working normally afterwards. It's just not updated.
When I try with stock recovery the update process finishes without errors, but the phone get stuck during the boot animation.
Maybe there's a way to fix the boot loop?
Looking forward to any suggestions
Cheers, Kleo2
I tried again and found a way without going back to full stock.
1. flashed stock recovery from full 175.44.1 image
2. let the phone download the OTA and restart to install it
3. ota install in stock recovery went fine
4. reboot -> stuck on boot animation again
5. flashed CWM and wiped cache AND dalvik cache
6. next boot took longer than normal but got past the boot animation
7. android optimized/cached my apps and then started normally
8. version is now 176.44.1 and the phone seems to work normally (after 30 minutes of usage)
Hope that helps someone and that I won't have issues going forward because I did it this way.
Cheers, Kleo2
Kleo2 said:
I tried again and found a way without going back to full stock.
Click to expand...
Click to collapse
Thanks. :good: Did 1 to 3 and phone booted just fine (not stuck on boot animation)
My phone: No logo fix, root, Xposed Framework
After update root was still there, Xposed needed a new install
total noob
i would so much like to update my rooted moto g.. because of my card reader.
does anyone know a step-by-step-for-complete-noobs-post and could provide a link?
i'm just starting.. and so happy and proud that i got my phone rooted.. and that i got rid of this rebooting problem by erasing the cache.
but i'm already lost when i read "flashed stock recovery".. yeah i know: that much noob!
help would be much appreciated!
Papshmir
Papshmir said:
i would so much like to update my rooted moto g.. because of my card reader.
does anyone know a step-by-step-for-complete-noobs-post and could provide a link?
i'm just starting.. and so happy and proud that i got my phone rooted.. and that i got rid of this rebooting problem by erasing the cache.
but i'm already lost when i read "flashed stock recovery".. yeah i know: that much noob!
help would be much appreciated!
Papshmir
Click to expand...
Click to collapse
I UPDATED my rooted Kitkat Tesco version SUCCESFULLY! and still rooted.
What I did:
1. install Motorola Device Manager (RESTART computer and telephone)
2. downloaded MotoTool
3. Made a Nandroid backup in CMW, made a backup with MotoTool too. Just in case
And deactived (did not uninstall) my Xposed framework modules (if you dont have it, you dont need to)
I have some system apps disabled, but didnt re-activate it. (was too lazy haha)
4. downloaded the correct ROM from: http://sbf.droid-developers.org/phone.php?device=14 (Tesco UK 4.4.2)
5. unzipped the ROM and rename and overwrite the recovery.img to the exact name as in the MotoTool All In One 2.6\Data\KitKat\StockKitKatrecovery.img (Just for sure it's the same as my ROM, I dont know if all the ROMs have the same recovery sooo )
6. started MotoTool, unplug&replug device. Checked KitKat option in the program, did a connection check, it was okay. Did a NORMAL restart via progam. You have to grant permisson on your phone.
7. after reboot, rebooted the phone to FASTBOOT.
8. Checked Stock Fastboot in the program, it flashed succesfully. Then I went into recovery (1×down volume, then 1× up volume) checked if the recovery was working. It was working (android logo+ no command error message)
9. reboot (long press power button)
10. Updeted OTA, settings/inf./update.. blabla okay okay next next. Wait until it downloads (only 7.9 MB )
11. wait for the update to be done, then it reboots, then apps are being updated. Everything looks fine and working
+1 flash CMW or other recovery again.
Hope this helps! I was afraid to do it too. I'm not used to MotoTool and other Motorola stuff because I had a HTC Desire, it was much simplier with that. But no risk here either! Good luck!
So I am trying to put back my stock recovery so I can take the OTA, but after I flash the recovery and try to reboot to it, it says "No Command". I have reflashed TWRP and then the stock recovery again with the same result. The phone itself will boot fine, but I can't install the OTA as it gets an error part of the way into the install. Any ideas? I have the 1034.
EDIT: Well I remembered I did the H+ mod, so after reverting that the OTA flashed I had Faux Kernel before hand, but after reflashing it my wi-fi wont enable, any ideas?
Thanks!
Kleo2 said:
I tried again and found a way without going back to full stock.
1. flashed stock recovery from full 175.44.1 image
2. let the phone download the OTA and restart to install it
3. ota install in stock recovery went fine
4. reboot -> stuck on boot animation again
5. flashed CWM and wiped cache AND dalvik cache
6. next boot took longer than normal but got past the boot animation
7. android optimized/cached my apps and then started normally
8. version is now 176.44.1 and the phone seems to work normally (after 30 minutes of usage)
Hope that helps someone and that I won't have issues going forward because I did it this way.
Cheers, Kleo2
Click to expand...
Click to collapse
Thanks,
Wiping cache and dalvik cache did the trick for me. You saved my day
Please please help
I have the same problem. I've tried to update the new OTA and failed. After restoring full stock rom, the system simply doesn't boot!
I had Faux Kernel and GravityBox but I didn't revert anything. I thought that a full stock rom would clear all system settings.
This is my version of stock (Blur_Version.174.44.9.falcon_umts.Retail.en.GB) and I tried to flash it several times now. No success. I get stuck on the boot logo.
I tried to downgrade to 4.3 using version Blur_Version.14.71.8.falcon_umts.Retail.en.GB. I was able to boot and see the initial setup but I have no WIFI! I was trying to install 4.3 then try to update via OTA but OTA only works with WIFI so I'm stuck.
I also tried installing the 24th Feb nightly build of Cyanogen and the device also booted but with no WIFI.
I really don't know what to do! Please help me. I've tried other stock images out of despair but none with sucess.
Does anyone have a clue to what might be to problem and how to revert it?
Thank you
draco259 said:
So I am trying to put back my stock recovery so I can take the OTA, but after I flash the recovery and try to reboot to it, it says "No Command". I have reflashed TWRP and then the stock recovery again with the same result. The phone itself will boot fine, but I can't install the OTA as it gets an error part of the way into the install. Any ideas? I have the 1034.
EDIT: Well I remembered I did the H+ mod, so after reverting that the OTA flashed I had Faux Kernel before hand, but after reflashing it my wi-fi wont enable, any ideas?
Click to expand...
Click to collapse
Before flashing stock ROM try to clear/format all your partitions with a custom recovery!
Sent from my XT1032 using xda app-developers app
I installed the OTA update using the CWM recovery but not root, I changed the update-script to not give error during installation
Hui91 said:
I UPDATED my rooted Kitkat Tesco version SUCCESFULLY! and still rooted.
What I did:
1. install Motorola Device Manager (RESTART computer and telephone)
2. downloaded MotoTool
3. Made a Nandroid backup in CMW, made a backup with MotoTool too. Just in case
And deactived (did not uninstall) my Xposed framework modules (if you dont have it, you dont need to)
I have some system apps disabled, but didnt re-activate it. (was too lazy haha)
4. downloaded the correct ROM from: http://sbf.droid-developers.org/phone.php?device=14 (Tesco UK 4.4.2)
5. unzipped the ROM and rename and overwrite the recovery.img to the exact name as in the MotoTool All In One 2.6\Data\KitKat\StockKitKatrecovery.img (Just for sure it's the same as my ROM, I dont know if all the ROMs have the same recovery sooo )
6. started MotoTool, unplug&replug device. Checked KitKat option in the program, did a connection check, it was okay. Did a NORMAL restart via progam. You have to grant permisson on your phone.
7. after reboot, rebooted the phone to FASTBOOT.
8. Checked Stock Fastboot in the program, it flashed succesfully. Then I went into recovery (1×down volume, then 1× up volume) checked if the recovery was working. It was working (android logo+ no command error message)
9. reboot (long press power button)
10. Updeted OTA, settings/inf./update.. blabla okay okay next next. Wait until it downloads (only 7.9 MB )
11. wait for the update to be done, then it reboots, then apps are being updated. Everything looks fine and working
+1 flash CMW or other recovery again.
Hope this helps! I was afraid to do it too. I'm not used to MotoTool and other Motorola stuff because I had a HTC Desire, it was much simplier with that. But no risk here either! Good luck!
Click to expand...
Click to collapse
At part 8, I am getting an image of the android guy with his stomach open with a big red '!'. That's 'no command' right?
Any ideas? I have no idea what I am doing
Guys, a really easy way to update is:
1. Install Philz recovery - http://forum.xda-developers.com/showthread.php?t=2639583
2. Reboot and then download the OTA update when prompted - select Install when prompted
3. It will now reboot into Philz recovery, install the update and reboot
4. You'll see Android is Upgrading...
5. Re-boot back into recover and re-install faux kernel
I have just upgraded my XT1032 on 174.44.9 en GB (rooted + faux008) to 176.44.1 using this... worked like a dream! All I had to do was re-install faux kernel as that was overwritten by the OTA, but Root was in-tact...
i have root, twrp recovery and faux kernel, the problem is only faux kernel? Or I must remove all? (root recovery etc)
Hey guys.
I just got a very nice condition used TF700T. I am trying to get recovery to install so I can flash a rom. I used the Transformer Toolkit to unlock it, which worked, it says device unlocked when booting.
But I absolutely cannot get it to Root, or flash recovery. If I try using debugfs root generic 2.3 it fails to write everything. If I try to flash any recovery with the toolkit it downloads and says flashing but just sits at about 25%, it boots my device into the screen that says usb fastboot mode with the three icons that say RCK Android and factory wipe. If I click the RCK it says rebooting and then goes to android mascot installing icon, but then the one with an X and error appears. What on earth am I doing wrong?
Is it the latest 4.2 update locking me out? Can I downgrade? I just can't get anything to root or flash recovery no matter what I do. I feel a little defeated being a long time member and 3 phone habitual rom flasher :crying:\
Any ideas what i'm missing?
benjmiester said:
Hey guys.
I just got a very nice condition used TF700T. I am trying to get recovery to install so I can flash a rom. I used the Transformer Toolkit to unlock it, which worked, it says device unlocked when booting.
But I absolutely cannot get it to Root, or flash recovery. If I try using debugfs root generic 2.3 it fails to write everything. If I try to flash any recovery with the toolkit it downloads and says flashing but just sits at about 25%, it boots my device into the screen that says usb fastboot mode with the three icons that say RCK Android and factory wipe. If I click the RCK it says rebooting and then goes to android mascot installing icon, but then the one with an X and error appears. What on earth am I doing wrong?
Is it the latest 4.2 update locking me out? Can I downgrade? I just can't get anything to root or flash recovery no matter what I do. I feel a little defeated being a long time member and 3 phone habitual rom flasher :crying:\
Any ideas what i'm missing?
Click to expand...
Click to collapse
What custom recovery are you installing? You may want to try with fastboot or adb method to flash your custom recovery which doesn't require rooted device, good luck....
LetMeKnow said:
What custom recovery are you installing? You may want to try with fastboot or adb method to flash your custom recovery which doesn't require rooted device, good luck....
Click to expand...
Click to collapse
Well I tried TWRP 2.7.1.1 I believe and also CWM , and Phil's custom touch CWM that all three are options to flash with the all in one ADB Toolkit app via USB from windows (http://forum.xda-developers.com/showthread.php?t=2094746)
How do I do the Fastboot method? I read about that, but have no idea how the process goes. I'm ok with skipping root and going straight to recovery and a rom because I can just flash superuser after if the rom isn't rooted already.
benjmiester said:
Well I tried TWRP 2.7.1.1 I believe and also CWM , and Phil's custom touch CWM that all three are options to flash with the all in one ADB Toolkit app via USB from windows (http://forum.xda-developers.com/showthread.php?t=2094746)
How do I do the Fastboot method? I read about that, but have no idea how the process goes. I'm ok with skipping root and going straight to recovery and a rom because I can just flash superuser after if the rom isn't rooted already.
Click to expand...
Click to collapse
I wanted to try an app I used to get twrp onto my LG G2 for the first time called "flashify" that worked like a charm. I just installed the app, downloaded the twrp file and flashed it then it reboots to recovery, but it requires root as far as I know. Does unlocking the boot loader allow things like this?
benjmiester said:
I wanted to try an app I used to get twrp onto my LG G2 for the first time called "flashify" that worked like a charm. I just installed the app, downloaded the twrp file and flashed it then it reboots to recovery, but it requires root as far as I know. Does unlocking the boot loader allow things like this?
Click to expand...
Click to collapse
Unlocked bootloader is allowed you to install the custom recovery so you can install the custom ROM, I believed..... You can check this guide out to see if you can setup your fastboot/adb. It is very easy to follow for the beginners, good luck....:fingers-crossed:
http://forum.xda-developers.com/showthread.php?t=2688891
benjmiester said:
I wanted to try an app I used to get twrp onto my LG G2 for the first time called "flashify" that worked like a charm. I just installed the app, downloaded the twrp file and flashed it then it reboots to recovery, but it requires root as far as I know. Does unlocking the boot loader allow things like this?
Click to expand...
Click to collapse
Once you unlocked the bootloader you can flash a custom recovery and after that - the sky's the limit.
Flashify works great, and it is a wonderful tool as long as you're able to boot into Android.
My problem with Flashify and Goomanager and TwrpManger is that it saves users from setting up a proper ADB/fastboot connection from PC to tablet.
As long as you can boot Android, these apps are great. But what if you can't? Once the tablet doesn't boot it's so much harder (and often too late) to get the correct drivers installed for ADB and fastboot.
So if you flash your recovery with any of those apps still make sure you have access with ADB and fastboot from your PC.
You will regret it if you don't - I (almost) guarantee it.
That's an excellent point. Thanks. I did actually get the Fastboot method to work. The problem was that I kept clicking into RCK recovery when I ws supposed to just leave it on that screen to push twrp instead. I got recover and just got done doing a backup. I'm about the flash my first rom (http://forum.xda-developers.com/showthread.php?t=2672751). Do we need to do factory reset / wipe data/system etc? The instructions on the ROM post say to just flash it from twrp so I'm guessing it has a built in wipe feature during install?
benjmiester said:
That's an excellent point. Thanks. I did actually get the Fastboot method to work. The problem was that I kept clicking into RCK recovery when I ws supposed to just leave it on that screen to push twrp instead. I got recover and just got done doing a backup. I'm about the flash my first rom (http://forum.xda-developers.com/showthread.php?t=2672751). Do we need to do factory reset / wipe data/system etc? The instructions on the ROM post say to just flash it from twrp so I'm guessing it has a built in wipe feature during install?
Click to expand...
Click to collapse
The instructions in the OP actually say that you have to do a full wipe (Factory Wipe) in TWRP coming from a different rom base. Which would be you unless you had a version of CROMBi-KK installed prior to this.
It's the default selection under the Wipe menu in TWRP. Just do that and then flash the rom and your ok.
Do not use the Factory Reset option from Settings or the Wipe Data option from the BL menu! Do this in TWRP only!
Cool thanks. I figured so because that's the norm with roms on all my phones. Thanks a lot for the help guys. So happy to be get KK running on my new toy!
Just wanted to update. KK 4.4.3 rom flashed and booted in. It's much nicer. The stock was a little laggy, and KK breathed a lot of new life into my ancient single core 1.0 ghz Galaxy S that I use as a music player so I figured it would help make the tab real nice and snappy too. Gotta go now, much fun to be had!!