Related
so i wanted to do a full factory reset did that from the setting's menu on the tablet now i am just getting a boot loop at least that is what is looks like and i can't go into recovery to doing a nand restore so at this point i am a little confused on what do do i rooted on 3.1 and i used the nvflash tool to root and don't remember what rom i am on i am thinking prime 1.5 my boot img looks like a lhoneycomb bee with a bios looking menu i am hoping someone can help me to move into the right direction thanks guys in advance!!
Tried to turn the device off, and boot into recovery?
if that does not work you should try to go into APX mode and use nvflash to flash a stock or cooked rom.
http://forum.xda-developers.com/showthread.php?t=1133014&highlight=nvflash
It appears you already got nvflash+Prime. Worst case, just nvflash again. I just did that for a couple of friend @work, quick and easy.
so just run the same file that i used to root it in the first place?? is there a link for that i can't find it
link in second post nvflash+ stock rom.
bricked transformer
so the problem i see now is that i can't get the t.f. off how would i enter apx mode if i can't it to turn off or should i just follow dirrections as stated with out it being off/
bfitzpatrickd2d said:
so the problem i see now is that i can't get the t.f. off how would i enter apx mode if i can't it to turn off or should i just follow dirrections as stated with out it being off/
Click to expand...
Click to collapse
You will need to start with the device turned off before entering APX mode.
thanks guys i am retarted a bit i found a way to get into recovery i am now restoreing nand. hope all is well.
bfitzpatrickd2d said:
so the problem i see now is that i can't get the t.f. off how would i enter apx mode if i can't it to turn off or should i just follow dirrections as stated with out it being off/
Click to expand...
Click to collapse
Hold Vol+ and then press the powerbutton until screen turnes black. You should hold it down a few more second to make shure APX mode is activated.
This works for me when I stuck at a bootloop.
Your problem is caused by prime's shutdown menu mods (recovery or reboot mod), you just need to flash http://www.sdx-downloads.com/devs/roach2010/Mods/Remove_Power_Button_Mod.zip with CWM.
Hi all
I got problem on my asus TF101 the device still restart and doesn't work !!
Any help please T_T ..
What were you doing before this happened, i.e. was it working fine?
Are you rooted and/or on a custom rom?
Were you trying to flash a new rom before this happened?
ThE_GiAnT said:
Hi all
I got problem on my asus TF101 the device still restart and doesn't work !!
Any help please T_T ..
Click to expand...
Click to collapse
LOL, the more information you can provide the better the help.
ThE_GiAnT said:
Hi all
I got problem on my asus TF101 the device still restart and doesn't work !!
Any help please T_T ..
Click to expand...
Click to collapse
Stick it in APX mode use NVflash to flash stock rom and try again.
Seg
thank you all for reply
my problem was i tried to flash revolver rom on my device through CWM but after i finish installing it through cmw the device did not start and i could not get on recovery mode or start normally.
my device serial is B80 which means i could not use APX mode am right ? or there is other way to solve this problem
thank you
my best wishes
Did the battery die during install?
What happens when you try to get back in recovery?
You're being very vague here which makes it hard for us to hep you.
fone_fanatic said:
Did the battery die during install? No
What happens when you try to get back in recovery? nothing !!
You're being very vague here which makes it hard for us to hep you.
Click to expand...
Click to collapse
look at the video .. plz
youtube.com/watch?v=PY_MIZ5C2KA&feature=youtu.be
well I couldn't see exactly which buttons you were pressing, but it looled like you were in apx mode first and then just wiped your userdata.
Since your b80 nvflash is no option (apx mode, power + volume up)
To get to recovery you have to press power + volume down followed by volume up when asked for it. If you don't press volume up in time you end up wiping your user data and that will do you no good.
In the video it looks like you hit volume up to slow after power+ volume down.
well hope it helps.
Hi everyone,
I just bricked my A510 and I am unable to fix it. My tablet does not have a bootlader at the moment and it won't boot. I found this guide in the forums but this guide does not work for A510 :
http://forum.xda-developers.com/showthread.php?t=1585907
I also tried to enter the APX mode by following this thread : http://forum.xda-developers.com/showthread.php?t=1747802 but I also had no luck there.
If I can enter the APX mode then maybe I can flash a new bootloader and then using recovery I might be able to install one of the ROMs I found here. But so far no go.
Any help with unbricking my tablet will be greatly appreciated.
Thank you all
sad,
how did it happen ?
sorry, no answer to help currently
The method for the 500 tab for APX mode, was press and hold the reset (paper clip hole on the bottom). Then press and hold PWR till it vibrates. Then count to 3 seconds, release PWR, then 1 second later release the paper clip.
This should leave you with a black screen, and the PWR light should be on.
This was for the 500/501 series tabs.
the method for APX is described in one of the quoted post of the OP. However the only way to check the A510 is in APX is to plug it to the computer.
In this cas you have to press and hold both volume keys, press reset with a paper clip, and the release the volume keys. The screen will stay black and the power led will not lit either.
However APX mode is only for flashing via nvflash and we don't have any element to flash an A510 this way...
None of the shortcut methods for entering APX mode discussed in these forums worked for A510. They only make the tablet turn on as usual and it just gets stuck in the boot screen with Acer logo. I guess I will have to wait until someone finds a way. Please keep me posted if you find out or hear any solution.
Thank you
One of the old tricks (hold PWR & Vol- & toggle rotation lock) still works.
Moscow Desire said:
One of the old tricks (hold PWR & Vol- & toggle rotation lock) still works.
Click to expand...
Click to collapse
This also did not work on A510
Thanks to everyone who replied and tried to help though.
Any new suggestions will be highly appreciated.
Tegra 3 nvflash
shredler said:
Hi everyone,
I just bricked my A510 and I am unable to fix it. My tablet does not have a bootlader at the moment and it won't boot. I found this guide in the forums but this guide does not work for A510 :
http://forum.xda-developers.com/showthread.php?t=1585907
I also tried to enter the APX mode by following this thread : http://forum.xda-developers.com/showthread.php?t=1747802 but I also had no luck there.
If I can enter the APX mode then maybe I can flash a new bootloader and then using recovery I might be able to install one of the ROMs I found here. But so far no go.
Any help with unbricking my tablet will be greatly appreciated.
Thank you all
Click to expand...
Click to collapse
I have the same problem. Have you tried this tegra 3 nvflash method?
http://forum.xda-developers.com/showthread.php?t=1927818
Click to expand...
Click to collapse
I think that tegra 3 no longer support nvflash from tegra 2. Well it's for transformer prime but it worth a try. It's tegra 3 too. Just I don't know how to modify it to work on Acer A510.
hi everyone
this is first time i am posting something. actually i have searched everything but couldnt find any solution for this.
i was flashing acer iconia smart s300 using acer download tool and something goes wrong and now my phone only detects QHSUSB DLOAD with usb data cable having blank screen.
i already have read that there is no solution for this but i thought there might be anyone knowing the solution????
Hi,
Maybe you can get into recovery mode or better yet fastboot mode.
how to get into download or fast boot now?
how to get into recovery mode or fast boot now?
Recovery mode
Hold power button and press option button
tried everything, every key with power button but nothing worked....
i think i need to get the replace
help
kashif555 said:
tried everything, every key with power button but nothing worked....
i think i need to get the replace
Click to expand...
Click to collapse
hold power vol down vol up for clean boot
Hello to everyone. I beg your help, please. I bought this amazing second hand tablet last friday. At the first attemp, and because I didn't want to read all the threads, I bricked the tablet. Yes, stupid thought, I know.
Because I wasn't happy with the result, I wiped all and delete bootloader, system, data... Everything. I know something with Microsoft issues and brave me (and silly) I thought It was similar, that I could start from outside of the tablet even if it was blank.
Anyway, the facts are:
The tablet is allways on, in APX mode. When I press down the power boton, it reboot. I know because when it's conected to my laptop, I can see the USB interface conected and the APX mode on it.
The screen is allways in black. ALLWAYS. No matter if I try to start in recovery in bootloader or any other way to start the system. Black, nice black.
Of course, no result in Power + Vol up, Power + Vol -, pressing power during 3 hours and 23 minutes... (I'm joking), but for long.
The only signal by which I know that it's not dead at all its when I conect the charger. I can see the small orange light in the power buton saying: "I'm alive"
Ok, I don't know what to do. I've read during the weekend as much as I could, tried evrything and nothing fixed. If it helps, before playing to be God, I had Android 4.0.1, I unlocked the bootloader with the apk, I installed the TWRP recovery and everything were right until I wanted to update the rom. Some mystakes that I don't remember and this is what I can tell you. Any holy soul which can help me, please? If not, can anyone help me? Thank you and I'll be looking forward your help.
evoin said:
Hello to everyone. I beg your help, please. I bought this amazing second hand tablet last friday. At the first attemp, and because I didn't want to read all the threads, I bricked the tablet. Yes, stupid thought, I know.
Because I wasn't happy with the result, I wiped all and delete bootloader, system, data... Everything. I know something with Microsoft issues and brave me (and silly) I thought It was similar, that I could start from outside of the tablet even if it was blank.
Anyway, the facts are:
The tablet is allways on, in APX mode. When I press down the power boton, it reboot. I know because when it's conected to my laptop, I can see the USB interface conected and the APX mode on it.
The screen is allways in black. ALLWAYS. No matter if I try to start in recovery in bootloader or any other way to start the system. Black, nice black.
Of course, no result in Power + Vol up, Power + Vol -, pressing power during 3 hours and 23 minutes... (I'm joking), but for long.
The only signal by which I know that it's not dead at all its when I conect the charger. I can see the small orange light in the power buton saying: "I'm alive"
Ok, I don't know what to do. I've read during the weekend as much as I could, tried evrything and nothing fixed. If it helps, before playing to be God, I had Android 4.0.1, I unlocked the bootloader with the apk, I installed the TWRP recovery and everything were right until I wanted to update the rom. Some mystakes that I don't remember and this is what I can tell you. Any holy soul which can help me, please? If not, can anyone help me? Thank you and I'll be looking forward your help.
Click to expand...
Click to collapse
Are you able to access fastboot? If so, flash the STOCK ASUS 4.0.1 Rom again. The mistake I think you made was flashing a ROM not compatible with the bootloader you have. You first have to update the bootloader to 4.1.1 or 4.2.1 to flash any of the current ROMS.
No fastboot, no bootloader update.
cmendonc2 said:
Are you able to access fastboot? If so, flash the STOCK ASUS 4.0.1 Rom again. The mistake I think you made was flashing a ROM not compatible with the bootloader you have. You first have to update the bootloader to 4.1.1 or 4.2.1 to flash any of the current ROMS.
Click to expand...
Click to collapse
Thanks for the reply:
I can't access fastboot. The tablet does nothing, just allways on in APX, so I can't update the bootloader. Neither I can't switch it off. I've read smething about run out the battery and start a process with ODIN?
I haven't tried it before, but maybe there's a way to create a bootable SD that will automatically install one of the stock ROMs so you can start over again?
If you can't get to the bootloader/fastboot/recovery and only have APX and no back upped NVFlash files then I think you are bricked unfortunately
hi is there any solution to solve this problem, or tablet dead
I'm in the same situation! :crying:
no solution???
Same story
Same here -- black screen, PC recognizes it as an APX device, but neither fastboot nor adb seem to work.
I didn't even try to mod mine. I was just using it normally, and it crashed, and now all it does is give me a black screen. When I poke the reset button, my PC notices the device disconnection and then a minute later it re-connects, but still nothing.
Holding down volume up/down during reset does nothing. Holding down power, with or without volume buttons, for an extended period does nothing.
This looks to be like an epidemic problem for these devices. Has nobody gotten a handle on it yet?
pty
I am also in your situation.
I have a tablet with Tegra xperia 3, black screen! APX mode only!
Does not read any adb and fastboot driver!!
There are new?
Hi everyone,
for me now the same situation. Only APX aviable. no fastboot ect...
pls help me solve this issue.
Thanks a lot.
Turn on in APX-Mode. You won't see anything on the screen, the display does not turn on.
If you connect the USB cable to a Windows PC, Windows will recognize it as an APX device.
On this mode you may use nvflash tool http://forum.xda-developers.com/showthread.php?t=1969797.
If nothing works, you should exchange the Mainboard!