guys I have a problem and seek your help, I have installed on my cubot one (MTK 6589) GamerzROM the MTK Nexus,
of course before I connected my droid cubot application mtk tools, I made up, I made the root and installed the cwm recovery ...
then the recovery I made all the necessary wipe and then installed this rom!
I now find myself with the phone flashes at power google the word and should not be more later!
and I can not get into recovery to be able to do anything else!
YOU CAN HELP ME PLEASE? THANK YOU SO MUCH
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Related
Dear Sirs,
My daughter is using a Celkon A119Q HD (Stock Rom is available needrom ). The device uses a MTK6589.
Recently, my friend flashed the wrong preloader on my phone and hard bricked it. Currently it doesn turn on, no display nothing. Me being an idiot did not take a backup using MTK droid tools and I dont have CWM recovery on my phone. So I decided to flash my phone with the stock rom.
I have installed all the necessary drivers and When I connect my phone to SP Flash tools, it is able to identify it. It says "Mediatek DA USB VCOM (Android) (COM5)". However I am unabe to flash it at all. I have tried format, format without boot loader, firmware->upgrade, format all + download, download only and even ran a memory test.
Absolutely nothing seems to work. I have attached the various screenshots of the error messages I get.
I would deeply be in your dept if you could kindly help me and guide me as to what I should do next Sir, since my daughter has been giving me hell over her phone.
:crying:
Thank you very much for the help. I sincerely appreciate it.
Can't figure out, What you mean by a 'Preloader' but looks like you've bumped...
N'ayam Amarsh'e said:
Can't figure out, What you mean by a 'Preloader' but looks like you've bumped...
Click to expand...
Click to collapse
he was trying to install a custom ROM and flashed the PRELOADER first...the process stopped halfway through and the phone has been bricked ever since.. :crying:
rakave said:
Dear Sirs,
My daughter is using a Celkon A119Q HD (Stock Rom is available needrom ). The device uses a MTK6589.
Recently, my friend flashed the wrong preloader on my phone and hard bricked it. Currently it doesn turn on, no display nothing. Me being an idiot did not take a backup using MTK droid tools and I dont have CWM recovery on my phone. So I decided to flash my phone with the stock rom.
I have installed all the necessary drivers and When I connect my phone to SP Flash tools, it is able to identify it. It says "Mediatek DA USB VCOM (Android) (COM5)". However I am unabe to flash it at all. I have tried format, format without boot loader, firmware->upgrade, format all + download, download only and even ran a memory test.
Absolutely nothing seems to work. I have attached the various screenshots of the error messages I get.
I would deeply be in your dept if you could kindly help me and guide me as to what I should do next Sir, since my daughter has been giving me hell over her phone.
:crying:
Thank you very much for the help. I sincerely appreciate it.
Click to expand...
Click to collapse
did you try to restock it.. installing a stock rom is the last option if available.. if the phone is not even turning on, check battery.. make sure your battery is charged..
and at last.. you could just try taking it to the service center if it's in warrenty.. but make sure it doesn't turn on.. don't tell them you were flashing.. they will never know.. hope it help in any way..
btw check out my signature...
Hello Everyone. I am new to XDA. I have posted this question on the advice of a XDA member. My question is that I have an Android Device (MTK) (Not Sure MTK XXXX). Although I know that it is X920E, the copy of HTC Butterfly. By mistake I have manually changed its bootanimation and as a result it is not booting, got stuck at HTC Logo (The new animation which I have downloaded). I thought it safer to take it to the shop but after 3-4 days they returned the phone saying that it is irrepairable. I tried on my own but now the device just stuck at Android Logo. (Shopman must have messed with it). So please can you help me to make my android relive. I had connected it with my PC but because of no driver I cannot proceed. So please, someone kind enough to provide a link to the drivers (X920e-MTK -China Phone) and also steps to flash a rom on it.
Thnx in advance. Looking forward for your reply.
Also do let me know is you need some other information.
Hi guys! I've tried to enter to recovery on my RCA tablet, it's T820 so it doesn't have it, but I don't seen it before trying so now I tried all possible combinations and then the tablet gots semi-bricked and I can't find a way to re-flash it, also it's Allwinner-based so it's tooooooooooooooo bad. Anyone can help me please?
A MTK Droid Tools bakcup or SP Flash Tool backup maybe perfect :3
So here's what I did:
My phone got kinda full of things so I wanted to reset it so I did it from the settings on the phone
it succeded but google play wasn't working so I had to mount R/W and blablablabla don't even know how I managed to do it but here's what happened:
My phone got stuck when powering up at ALLVIEW logo and when I try to wipe data/factory reset from CWM it succeds but when I press reboot system now it says I don't have root and the Yes option is replaced with Install Root. At this point whatever I press , either No , Go back or Install Root , it restarts and goes up to the logo.
Tried :
Almost everything , like I downloaded this Rooted Deodexed Primo S2 firmware and put it on my SD card but in the CWM recovery it won't detect it as it seems.
Any ideeas ? I really am in a dillema and I hope I didn't brick my phone. Please help me xda !
oh btw , the phone gets charged , if it matters.
bump- Sorry for fast bump but I dont want this to get lost and I really need help :/
bump..
bump...
Hi,
Thanks for using XDA Assist Please post here [FIRMWARE] [UNBRICK] WALTON Primo S2 Official Firmware, Flashtools & Drivers so that experts using your device may help you more accurately
Good luck!
I already installed the mtk driver and the sp flash tool and i also have the stock rom of my phone but the problem is, my pc can't detect my dead phone. I already searched for solution here and youtube and followed the procedures but nothing happened. Same problem. Hope you can help me guys. Thanks!
pls my tecno phone i format it with sp flash and is not coming up again pls i need your help