Im using zerolemon 3000mwh battery with i337m.
After inserting battery in, original battery cover doesnt close completely.
Sent from my SGH-I337M using xda app-developers app
Could you post a picture of it
Sent from my SPH-L720 using XDA Premium 4 mobile app
The ZeroLemon 3000mAh battery does fit with original back case, you may need to push hard for it to close properly
I bought this 3000mAh ZL as well, yes a tad bit thicker when comparing with the original but it did fit using the original back cover. No issue.
Sent from my GT-I9505 using Tapatalk 4
Mine fits fine. I'm even using a wireless charging receiver
I have two of them. The cover didn't fit with either of them - solution = remove the label from the battery. Then it fits.
Mine fits fine just a little snug
Luke
Related
I just ordered an extended battery and battery door and I am wondering if there is any case out there that will fit with it?
Sent from my MB865 using xda premium
Guess I'm gonna leave my phone naked. I had to end up wrapping the battery in tape before it fit snug enough to power the phone -_-
Sent from my MB865 using xda premium
Where did you get the battery and how does it perform????? Also sure you could find a universal holster..... Might also be able to mod an otter box by cutting it with a dremel will protect the important parts Just a suggestion.....
hankbizzo5 said:
Where did you get the battery and how does it perform????? Also sure you could find a universal holster..... Might also be able to mod an otter box by cutting it with a dremel will protect the important parts Just a suggestion.....
Click to expand...
Click to collapse
I'm not handy with tools, and I purchased it on amazon. They are sending me a replacement so let's see what happens. As far as holsters go... ehh negative lol. I wish otterbox would release a commuter to fit it because I'm keeping this phone for a while.
Sent from my MB865 using xda premium
I got the Motorola extended battery from at&t and just cut my otterbox defender with a dremel and it fits perfectly.
and for anyone looking for an extended battery, my att store has them for 25 with the back plate. I believe they are 50 on Motorola.com
So check your att store first
Sent from my MB865 using xda premium
bfinch said:
I got the Motorola extended battery from at&t and just cut my otterbox defender with a dremel and it fits perfectly.
and for anyone looking for an extended battery, my att store has them for 25 with the back plate. I believe they are 50 on Motorola.com
So check your att store first
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Amazon has them for $36 but like I said, I had to put tape on my battery so....
Sent from my MB865 using xda premium
Check out extended battery (2600mAh) and battery door at Moto site.
Sent from my MB865 using xda premium
I dropped my phone and the custom battery door that came with my hyperion 3500 mAh battery no longer stays securely in place. Any one know where I can get another fat back rear plate?
Sent from my myTouch_4G_Slide using xda app-developers app
Try eBay, I've seen the battery cover sold without the battery, alone in like 3 different colors
Joe
Sent from my HTC MyTouch 4G Slide using xda premium
Yeah, I'm looking for one too.
Can't believe how hard it is to find the covers without the batteries.
Unfortunately, the hyperion (so far awesome part for its ~$10 price) came with a pretty flimsy cover. The clips are weaksauce.
Sent from my myTouch_4G_Slide using xda app-developers app
I just got the wireless charging battery cover for my s3 and the cruzr-lite TPS case that I have been very happy with until now no longer fits properly around the center of the phone because of the added thickness. Anybody have a case to recommend that they are using on an s3 with the wireless charging cover?
Sent from my SCH-I535 using xda app-developers app
I have a QI wireless charger a few weeks ago and the only thing that will fit the phone is the rubbery cover, I got it at the Verizon store. Nothing else can fit, tried at least 6 other different covers.
Sent from my SCH-I535 using xda app-developers app
Thanks. Anybody else have any recommendations or is the Verizon rubber case (I assume silicon) the only viable choice?
Sent from my SCH-I535 using xda app-developers app
I'm attempting a battery door mod on the original case that will allow me to change out the battery whenever i want with a charged one.
I have filed out enough space to remove the battery from the case while the case is still on. There will be a little piece of ribbon at the right that will life the battery out.
The NFC and qi chips will be attached to a piece of plastic with Velcro on it so that when when you pull it from the case the NFC and qi chip will be attached to that piece of plastic and will allow me to remove the battery.
I am planning on finishing the case and the battery door in leather.
One thing I'm having trouble working out is how I would be able to charge the nexus 4 battery without it being inside the phone. Any help on this would be appreciated.
Cheers
Steven
Sent from my Nexus 4 using xda premium
shenery said:
One thing I'm having trouble working out is how I would be able to charge the nexus 4 battery without it being inside the phone.
Click to expand...
Click to collapse
I have used this for several different phone batteries and has worked well with all of them.
http://www.amazon.com/dp/B0058XGN7I/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Sent from my Nexus 4 using Tapatalk 2
frigidazzi said:
I have used this for several different phone batteries and has worked well with all of them.
http://www.amazon.com/dp/B0058XGN7I/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
That looks really cool but I'm not sure if it would work. The nexus 4 battery has a rather strange connector on it. See pic.
Sent from my Nexus 4 using xda premium
Hmm. Yeah I guess I never saw the Nexus 4 battery out of the phone to see if it had the same gold connectors. It looks like these people have a way, but it doesn't seem very convenient.
http://forum.xda-developers.com/showthread.php?t=2250454
Sent from my Nexus 4 using Tapatalk 2
Photos in a sec to see where I am. Brace yourselves lol
Sent from my Nexus 4 using xda premium
Sent from my Nexus 4 using xda premium
Ok so I've mocked up a prototype. The concept works just need to get it looking a little better with the help of either some cut sign vinyl or leather glued to it. Have a look and tell me what you think
PS. I put a little piece of leather under the NFC chip to raise it slightly to make the connection with the added height. Works great!
Sent from my Nexus 4 using xda premium
Just had a though. A clip on case on the back might do the trick to hide some of the rough bits lol.
Sent from my Nexus 4 using xda premium
Could someone please recommend me a battery that's higher than 1650 mAh but it should still fit in the stock case.
http://www.amazon.com/Extended-Battery-Samsung-Galaxy-D710/sim/B006THW4RA/2
Yes this is a s2 epic battery, but it fits, very tight, so you have to tightly push all sides of the cover until they snap. I've used this for over a year now.
Sent from my SGH-T959V using xda premium
I like this one, you get 2 plus a charger for $18.99
http://www.amazon.com/Batteries-SPH...-purpose/dp/B005HBH1R2/ref=pd_sxp_grid_pt_0_0
ariesgodofwar said:
I like this one, you get 2 plus a charger for $18.99
http://www.amazon.com/Batteries-SPH...-purpose/dp/B005HBH1R2/ref=pd_sxp_grid_pt_0_0
Click to expand...
Click to collapse
My roommate has this on sgz4g with.simple.mobile. haven't tested for longer battery I assume so unless it's fake marketing which I doubt
Sent from my SGH-T959V using Tapatalk 2
My wife and I started using the two-pack when our original batteries got to the easily spin/bulgy state. Similar battery life to the original, as in... way better than they'd gotten to.