Did I completely hose up my Samsung Infuse?
All the phone will display is this:
Firmware upgrade encountered an issue.
Please select recovery mode in Kies & try again.
Nothing else - no recovery menu, nothing except the above message.
Samsung Tech Support says the Infuse is incompatible with Kies.
I was trying to updated the firmware to ICS.
Is there anyway to recover this phone???
Thanks
Carl
Just flash with Odin or Heimdall on that screen
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
priests retrnerCa
magnetboard said:
Just flash with Odin or Heimdall on that screen
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
Unfortunately, my Samsung Infuse will not let me get into the recovery menus.
Carl
cwmoser said:
Unfortunately, my Samsung Infuse will not let me get into the recovery menus.
Carl
Click to expand...
Click to collapse
Arrrr that screen is kind of download mode u can flash it via odin/heimdall.
Yeah.....its typed on Note 3.
rkkaranrk said:
Arrrr that screen is kind of download mode u can flash it via odin/heimdall.
Yeah.....its typed on Note 3.
Click to expand...
Click to collapse
Note 3 ???
I contacted Samsung Tech Support and they say Kies does not support the Samsung Infuse.
Guess that is why when I enter SGH-I997 as the model # in Kies, it says its not a valid model #.
Wonder if Samsung is just abandoning the Infuse?
What I need is a procedure to do a complete Factory Reset where my Infuse phone does
not have any menu selections for download, etc. The phone will only display "Firmware
upgrade encountered an issue ..."
Yeah note 3 bought it yesterday.
As told u can flash it with odin,
Just download a factory firmware and flash it with odin or use heimdall.
Use this- http://forum.xda-developers.com/showthread.php?t=1613523
Yeah.....its typed on Note 3.
rkkaranrk said:
Yeah note 3 got out yesterday.
As told u can flash it with odin,
Just download a factory firmware and flash it with odin or use heimdall.
Yeah.....its typed on Note 3.
Click to expand...
Click to collapse
I did try odin this morning. Odin reported success but the phone won't do anything.
I checked PDA and selected a Clockwork Mod (CWM) hoping I would get the boot menu but no go.
I had these checked: Re-Partition, Auto Reboot, and F. Reset Time.
Now that I think about it, should I have selected BOOTLOADER rather than PDA?
Phone this afternoon is at Best Buy where a Samsung Tech is looking at it.
I watched him work with it using Kies, etc and while there it was not fixed.
Carl
Got the phone back from Best Buy -- no joy.
Tried everything to un-brick this phone.
Did learn that Kies is not compatible with Samsung Infuse.
There might be a setup with Odin that will unbrick it but I really think its going to take some
other software because apparently data is not being placed in the phone.
Carl
cwmoser said:
Got the phone back from Best Buy -- no joy.
Tried everything to un-brick this phone.
Did learn that Kies is not compatible with Samsung Infuse.
There might be a setup with Odin that will unbrick it but I really think its going to take some
other software because apparently data is not being placed in the phone.
Carl
Click to expand...
Click to collapse
This is the unbrick package for the infuse 4g http://forum.xda-developers.com/showthread.php?t=1705260
Sent from my SGH-I997 using XDA Premium 4 mobile app
alexischino said:
This is the unbrick package for the infuse 4g http://forum.xda-developers.com/showthread.php?t=1705260
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I downloaded those files and will try them -- but
unfortunately I can't make my phone do step 2:
2.) Place phone in download mode.
Carl
cwmoser said:
I downloaded those files and will try them -- but
unfortunately I can't make my phone do step 2:
2.) Place phone in download mode.
Carl
Click to expand...
Click to collapse
Turn off the phone pull out the battery, hold the two volume rockers put the battery in plug the usb cable, and that it.
alexischino said:
Turn off the phone pull out the battery, hold the two volume rockers put the battery in plug the usb cable, and that it.
Click to expand...
Click to collapse
THAT DID IT -- Thanks very much, I have my Samsung Infuse working now.
Those files worked perfectly with ODIN -- I did choose the rooted one.
What confused me was that my Samsung Infuse screen had only this on it:
Firmware upgrade encountered an issue.
Please select recovery mode in Kies & try again.
BUT, when you provided me with those tiles above and I setup Odin
to use files for PIT, PDA, and PHONE, a blue progress bar started
appearing just below that "Firmware upgrated encountered ..." message.
Thanks much.
Carl
PS: I spent a long time chasing down a file called GTG Ultimate Unbrick that
took me to sites that wanted to install spamware, etc. Anyone running across
threads like that, don't waste your time -- instead use the process mention
by the nice person who helped me.
Those are good news :thumbup: and don't forget to hit the thanks button to show that you appreciate the time and effort of those who help you
Sent from my SGH-I997 using XDA Premium 4 mobile app
After the fresh reload, I noted that the phones Android OS works much speedier.
Before I go try again to install ICS, is ICS on the Infuse slower?
Carl
cwmoser said:
After the fresh reload, I noted that the phones Android OS works much speedier.
Before I go try again to install ICS, is ICS on the Infuse slower?
Carl
Click to expand...
Click to collapse
No, is suppose to be faster than gb!
Sent from my SGH-I997 using XDA Premium 4 mobile app
Thanks. I bricked my Samsung Infuse trying to install RasbeanJelly_Googleized_MOD_28-10_by_lippo94.zip
It was on a webpage showing how to upgrade to ICS
What firmware do you recommend to upgread to ICS?
Carl
cwmoser said:
Thanks. I bricked my Samsung Infuse trying to install RasbeanJelly_Googleized_MOD_28-10_by_lippo94.zip
It was on a webpage showing how to upgrade to ICS
What firmware do you recommend to upgread to ICS?
Carl
Click to expand...
Click to collapse
Here this is the one I always use http://forum.xda-developers.com/showthread.php?t=1661690
Sent from my SGH-I997 using XDA Premium 4 mobile app
alexischino said:
Here this is the one I always use http://forum.xda-developers.com/showthread.php?t=1661690
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I read over the thread for ICS but I could not find a download link for the Samsung Infuse.
Is the download in another thread?
Like to make sure I use the one from a reliable source like you.
Thanks again.
Carl
I found these Jelly Bean files:
BeanStalk4.3.00-20130811-infuse4g.zip
gapps-jb-20130813-signed.zip
BUT, when I try to boot ICS in Recovery, all that is displayed is ...
GALAXY S
cyanogen (mod)
... and nothing else happens.
I had to remove the battery to get the phone to work again.
I tried to enter Recovery by selecting the Reboot Recovery and also tried
holding down both Volume Up/Down and the Power buttons but they only
resulted in the GALAXY S screen.
Any advice?
Thanks
Carl
I bricked my Samsung Infuse
Have you ever did a bad flash, or stop a flash in process.
Did I completely BRICK my Samsung Infuse?
All the phone will display is this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So Went over to get me some tools to fix [ODIN][UCLB3] UCLB3 Unbrick - Return to stock - Working PIT included
Thank you
scott30
gtg465x for earlier unbrick packages and posts on using dd
imnuts for posts on how to create Odin images
Przekret for the Samsung UCLB3 leak
Everyone in the Infuse 4g XDA forum - for everything else with this process
Related
I have my friend's galaxy s 4g and he wanted me to root it then flash custom rom,
I didn't pay attention since it says galaxy s on the back, I just downloaded a rom and flashed it but phone already messed up.
right after flashed it, got this screen http://i.imgur.com/NIYK2.jpg (!) and somehow i was able to skip it and get galaxy boot logo then phone keeps restarting.. tried to put it into downloading mode, but no luck, computer say usb device cannot be recognized, I even tried different usb ports and different computer, noluck.
Tried to find solutions by using search but nothing.. I am thinking to buy usb jig.
Any advise?
Lol. That sucks. Maybe next time you will do a little searching and reading up.
Now would be a good time to learn to search. You are the 10000 person to do this.
Look and you will find your answer.
Also.. this should be in Q and A.
Sent from my SGH-T959V using XDA App
Well, this does happens a lot. It'd be nice if odin could recognize which phone does the ROM you're about to install belongs to, and what phone is connected. If they didn't match, odin could warn you before flashing. And this wouldn't be happening as often.
Sent from my SGH-T959V using XDA App
Please use the Q&A Forum for questions Thanks
Moving to Q&A
try this http://forum.xda-developers.com/showthread.php?t=1117990
but main problem is I can't go anywhere.
I get this when I plug into computer or to the wall charger.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and I get this if I power it on without inserting an usb, nothing more than that, phone keeps restarting without usb
Have you tried:
Remove the battery
Plug in the USB cable
Hold down the VOL UP & VOL DOWN at the same time while putting the battery in
That might get you into download mode.
stephen_w said:
Have you tried:
Remove the battery
Plug in the USB cable
Hold down the VOL UP & VOL DOWN at the same time while putting the battery in
That might get you into download mode.
Click to expand...
Click to collapse
Ok I did, I used odin and stock firmware to flash then this came up and wont go away,
BUT ODIN still can see the phone
You probably need to flash a good ROM with good bootloaders. If you're not worried about going to GB, you can do this:
Grab chadster's KG4 here: http://forum.xda-developers.com/show....php?t=1183413
It has 4 files:
Put CODE_T959VUVKG4_CL1385158_REV00_user_low_noship.ta r.md5 in PDA
Put Hawk_Sidekick_VibrantPlus_831.pit in PIT
Put SGH-T959V-CSC-TMB-VIBRANTP.tar.md5 in CSC
Put T959VUVKG4-Phone-CL1037720.tar.md5 in PHONE
Let ODIN decide what needs to be checked & flash.
link doesn't work
labrea said:
link doesn't work
Click to expand...
Click to collapse
Sorry about that
http://forum.xda-developers.com/showthread.php?t=1183413
stephen_w said:
Have you tried:
Remove the battery
Plug in the USB cable
Hold down the VOL UP & VOL DOWN at the same time while putting the battery in
That might get you into download mode.
Click to expand...
Click to collapse
stephen_w said:
Sorry about that
http://forum.xda-developers.com/showthread.php?t=1183413
Click to expand...
Click to collapse
I am downloading it, 10 mins left.
Last time when I tried to flash with odin 1.85, I got this error and it stucked, 1.70 didn't even work, failed in secs
Will try with yours
stephen_w said:
Sorry about that
http://forum.xda-developers.com/showthread.php?t=1183413
Click to expand...
Click to collapse
You know what.
YOU ARE THE MAN.!
It worked.
I cannot believe this crap works now.
Thank you so much,
now, next step is, root and custom fw (my friend wants to use hotspot, it's limited with custom fw)
can you help?
labrea said:
You know what.
YOU ARE THE MAN.!
It worked.
I cannot believe this crap works now.
Thank you so much,
now, next step is, root and custom fw (my friend wants to use hotspot, it's limited with custom fw)
can you help?
Click to expand...
Click to collapse
May I suggest doing some reading and research before you test the waters again?
Sent from my SGH-T959V using XDA App
stephen_w said:
Sorry about that
http://forum.xda-developers.com/showthread.php?t=1183413
Click to expand...
Click to collapse
camalus said:
May I suggest doing some reading and research before you test the waters again?
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Well,
You are right, I'm also searching at the same time
labrea said:
You know what.
YOU ARE THE MAN.!
It worked.
I cannot believe this crap works now.
Thank you so much,
now, next step is, root and custom fw (my friend wants to use hotspot, it's limited with custom fw)
can you help?
Click to expand...
Click to collapse
Awesome, glad it's working If you're wanting root, the easiest way (for me) is to flash one of drhonk's kernels from here:
http://forum.xda-developers.com/showthread.php?t=1194032
Make sure you grab the one that matches the ROM you're on (KG4 in this case). Flash it via ODIN (put it in the PDA spot), and flash. Those will give you CWM, root, & voodoo.
Before you do that, though, I would update to a newer GB ROM. KJ6 is the latest & people have reported better wifi with it. I'm running the KJ6 ROM, drhonk's KJ1 kernel, with Adrenaline Shot v12 and my phone runs great.
stephen_w said:
Awesome, glad it's working If you're wanting root, the easiest way (for me) is to flash one of drhonk's kernels from here:
http://forum.xda-developers.com/showthread.php?t=1194032
Make sure you grab the one that matches the ROM you're on (KG4 in this case). Flash it via ODIN (put it in the PDA spot), and flash. Those will give you CWM, root, & voodoo.
Before you do that, though, I would update to a newer GB ROM. KJ6 is the latest & people have reported better wifi with it. I'm running the KJ6 ROM, drhonk's KJ1 kernel, with Adrenaline Shot v12 and my phone runs great.
Click to expand...
Click to collapse
I don't want to flash wrong kernel or something like I did many times today, can you provide a link for KG6? should I follow same steps as I did before with Odin?
Thanks
labrea said:
I don't want to flash wrong kernel or something like I did many times today, can you provide a link for KJ6? should I follow same steps as I did before with Odin?
Thanks
Click to expand...
Click to collapse
LOL, I don't blame you for being leery. KJ6 is here:
http://forum.xda-developers.com/showthread.php?t=1323521
All you have to do is put T959VUVKJ6-REV00-home-low-CL694130.tar.md5 in the PDA section, leave the check boxes alone, and flash it.
stephen_w said:
LOL, I don't blame you for being leery. KJ6 is here:
http://forum.xda-developers.com/showthread.php?t=1323521
All you have to do is put T959VUVKJ6-REV00-home-low-CL694130.tar.md5 in the PDA section, leave the check boxes alone, and flash it.
Click to expand...
Click to collapse
I just found one of your post and going to use it;
http://forum.xda-developers.com/showpost.php?p=18992345&postcount=4
labrea said:
I just found one of your post and going to use it;
http://forum.xda-developers.com/showpost.php?p=18992345&postcount=4
Click to expand...
Click to collapse
Cool deal. That will basically have your phone set up like mine. dsexton's Adrenaline Shot really makes a difference
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
presents....
A guide to root the new ICS UVLH5 firmware update.
This guide will try and make it very easy to root your stock firmware for those of you who are having
problems or don't want to wait for a stock rooted rom
anyways here goes the step by step assuming that you have a Samsung Galaxy S Blaze 4g T769 and are on ICS
UVLH5 firmware.
Before anything of course you'll need the files and here they are:
ClockWorkMod Recovery
Blaze Pit
Odin 1.8.5 Zip
SuperUser Zip
After downloading all the files first move the Superuser.zip to the root of your sdcard..not internal sdcard but the removable one. Then unzip the Odin zip and once unzipped:
Step 1:
Run Odin 1.85.exe, and prepare Odin:
Check "auto-reboot", and uncheck all other options.
Click PDA and select the TAR for clockworkdmod you downloaded. Click PIT and select the Blaze PIT your downloaded.
DOUBLE CHECK THAT YOU HAVE REPARTITION UNCHECKED
Step 2:
Connect the USB cable to your PC, but NOT your device.
Remove the battery.
Reinsert the battery.
Hold down Volume Up + Volume Down
Then while holding the voume keys plug in USB cable
You should now be in Download Mode
Step 3:
Make Sure repartition is still unchecked and click START in Odin.
Step 4:
When done the phone will reboot to the OS after this you have to reboot to recovery, here are a few ways.
1. adb command: adb reboot recovery
2. volume combo.
a. turn off phone.
b. hold volume + and volume -
c. while holding the volume buttons hold the power button for 10 seconds
d. after the 10 seconds release power button but keep holding volume buttons until you get into CWM recovery
Step 5:
Flash the SuperUser zip file
Step 6:
Reboot to System
Step 7:
Check whether root took or not.
Step 8:
If it did come back here and click thanks
Credits:
CWM (shabbypenguin)
Odin 1.8.5 (k0nane)
SuperUser (chainfire)
Hosting (gfx.myst)
TFQ ( cus we here to help )
Because I can lol
Do we need to update via kies first?
Sent from my SGH-T769 using xda app-developers app
Wait I did this a little earlier and I didn't flash the pit. Will this cause any problems down the road?
Sent from my SGH-T769 using xda app-developers app
shaikmonster said:
Do we need to update via kies first?
Sent from my SGH-T769 using xda app-developers app
Click to expand...
Click to collapse
Yes or use the tar file a user uploaded around here a bit earlier.
KrimsonChin said:
Wait I did this a little earlier and I didn't flash the pit. Will this cause any problems down the road?
Sent from my SGH-T769 using xda app-developers app
Click to expand...
Click to collapse
If it flashed fine then I don't think it'll cause you any problems down the road.
Can I do this on Mac?
Sent from my SGH-T769 using xda app-developers app
Where in the process do we do the downloaded tar file?
im_awesome_right? said:
Can I do this on Mac?
Sent from my SGH-T769 using xda app-developers app
Click to expand...
Click to collapse
nope just for windows as Odin is only windows compatible
shaikmonster said:
Where in the process do we do the downloaded tar file?
Click to expand...
Click to collapse
the TAR file is the CWM recovery
im_awesome_right? said:
Can I do this on Mac?
Sent from my SGH-T769 using xda app-developers app
Click to expand...
Click to collapse
I dont think there's a MAC version of Odin.... if you can somehow flash the CWM, you're golden. until then... ::shrugs::
Do I just drag the superuser zip to sd? gotta make sure..
erikmm said:
nope just for windows as Odin is only windows compatible
the TAR file is the CWM recovery
Click to expand...
Click to collapse
The ics tar file
Worked for me
Thanks erik! Looks like I've got root!
motez23 said:
Do I just drag the superuser zip to sd? gotta make sure..
Click to expand...
Click to collapse
you can. or download it. the important part is remembering whether its on your internal or external SD card when you go to flash it in CWM. as long as the MD5 is good, you're good as I figured out yesterday, my work computer messes with MD5's like a mutha******
I didn't expect to be able to do that so easily, but it all worked! Thanks much.
I had used the first stock root posted here, but didn't bother updating it to the minor patch that was released. I updated to ICS using Kies, knowing that I would lose root, and since my phone was rooted I was half expecting it to not work.
Well it did, and it almost worked too well. I was pleasantly surprised that I didn't even lose any apps or settings in the process. I lost root of course, although surprisingly superuser is still loaded on the phone. (I've confirmed the phone is not still rooted)
Anyways, my memory is a bit foggy, but doing this process is a total wipe on the phone right? I might even prefer that.
Cirkustanz said:
I had used the first stock root posted here, but didn't bother updating it to the minor patch that was released. I updated to ICS using Kies, knowing that I would lose root, and since my phone was rooted I was half expecting it to not work.
Well it did, and it almost worked too well. I was pleasantly surprised that I didn't even lose any apps or settings in the process. I lost root of course, although surprisingly superuser is still loaded on the phone. (I've confirmed the phone is not still rooted)
Anyways, my memory is a bit foggy, but doing this process is a total wipe on the phone right? I might even prefer that.
Click to expand...
Click to collapse
The first couple boots will be laggy. That's the nature with any rom
Sent from my SAMSUNG-SGH-T769 using xda app-developers app
I'm rather confused by your quoting my reply, and not replying to it.
Cirkustanz said:
I'm rather confused by your quoting my reply, and not replying to it.
Click to expand...
Click to collapse
honestly, as am i, as my reply had nothing to do with your post perhaps a lack of sleep, perhaps a miss click, idk. but I guess we never will
I wish I read this thread sooner.
Here's my situation:
I had a rooted Gingerbread stock ROM that I upgraded to the official ICS update using Kies. I then used the same ODIN method to root the phone and now it won't boot up past the "Samsung Galaxy S" loading screen. Any ideas on where to go from here? I'm afraid if I do anything else haphazardly, I would only be digging myself deeper into this hole.
Thank you!
You flashed a GB kernel on ICS. If I were you, I would flash a GB .tar using Odin (unless you can find an ICS .tar somewhere?). Then, boot into recovery and wipe system and data, because you'll see a blue ICS menu flickering in the background upon booting up into the GB phone setup screen. At least, that is what happened to me. Then, upgrade to ICS using Kies.
Sent from my SGH-T769 using xda app-developers app
Hey guys. First I'd like to aplogize for posting so many help threads but I'm trying my best to figure it out on my own.
I was using one-click to stock when my mother dropped something and needed my help urgently, so I told my brother to start it up for me as my phone was already plugged in and connected. I am running the T959W rather than the T959V and my brother clicked on the option to flash bootloaders. The download was completed normally I think. However, my phone will not leave the recovery mode.
Could you guys please help? Thanks.
When flash bootloaders was hit on T959V back to stock, my brother said it said "MODEM UPLOAD FAILED ENDING SESSION". My guess is that it cleared my boot loader and then since it failed while trying to upload the modem, it ended the session without readding a boot loader? It continously says "MODEL UPLOAD FAILED" Whenever I attempt to use the T959V back to stock.
Edit:
I have tired the back to stock for T959W from: http://forum.xda-developers.com/showthread.php?t=1956025
However, I get these error messages.
Kernel is missing because I removed it out of the package hoping maybe it'd solve the problem since it was also failing, but so is recovery...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WayTooGosu said:
Hey guys. First I'd like to aplogize for posting so many help threads but I'm trying my best to figure it out on my own.
I was using one-click to stock when my mother dropped something and needed my help urgently, so I told my brother to start it up for me as my phone was already plugged in and connected. I am running the T959W rather than the T959V and my brother clicked on the option to flash bootloaders. The download was completed normally I think. However, my phone will not leave the recovery mode.
Could you guys please help? Thanks.
Click to expand...
Click to collapse
Try instilling a new ROM
Sent from my SGH-T959V using xda app-developers app
Cooptx said:
Try instilling a new ROM
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
I have tried installing AOKP Milestone 6 by team acid unofficial (ICS) and CM10 (JB) but the same thing keeps occuring.
I think you should look here if you haven't already
http://forum.xda-developers.com/showthread.php?t=1956025
TwitchyEye said:
I think you should look here if you haven't already
http://forum.xda-developers.com/showthread.php?t=1956025
Click to expand...
Click to collapse
Yes I was trying that but for some reason it just kept failing "KERNEL UPLOAD FAILED" "RECOVERY UPLOAD FAILED"
WayTooGosu said:
Yes I was trying that but for some reason it just kept failing "KERNEL UPLOAD FAILED" "RECOVERY UPLOAD FAILED"
Click to expand...
Click to collapse
Sometimes heimdall is finicky so if you know for sure you got the drivers working and you followed instructions properly trying it a couple times in a row might do it....although I guess if you say it keeps failing that would imply more than once...
TwitchyEye said:
Sometimes heimdall is finicky so if you know for sure you got the drivers working and you followed instructions properly trying it a couple times in a row might do it....although I guess if you say it keeps failing that would imply more than once...
Click to expand...
Click to collapse
Yes it has failed every attempt (I''ve tried about 10 times).
At this point you should really start fresh maybe even a different computer and see if you get anywhere. Typically if it's not working it's a driver issue and you gotta get rid of all the drivers related to the phone and reboot, then re-install them using zadig...and maybe reboot again.
TwitchyEye said:
At this point you should really start fresh maybe even a different computer and see if you get anywhere. Typically if it's not working it's a driver issue and you gotta get rid of all the drivers related to the phone and reboot, then re-install them using zadig...and maybe reboot again.
Click to expand...
Click to collapse
I think the driver is being recognized fine because it is being recognized by ZDiag, T959V back to stock program, Hemidall. I am not quite sure what the problem is :|.
WayTooGosu said:
I think the driver is being recognized fine because it is being recognized by ZDiag, T959V back to stock program, Hemidall. I am not quite sure what the problem is :|.
Click to expand...
Click to collapse
Maybe the gods will chime in about now...?
I suggest using a new pc too. Sometimes its a simple conflict that is causing the problem and a different pc will fix it every time.
Try a different cable/port combo? Sometimes cables die at the worst times....
Sent from my SGH-T959V using xda app-developers app
eollie said:
I suggest using a new pc too. Sometimes its a simple conflict that is causing the problem and a different pc will fix it every time.
Click to expand...
Click to collapse
Hmm, I just tried it on my laptop, back to stock T959V flashs just fine however I still ahve the issue of being stuck in recovery mode but I can't get T959W to work still.
WayTooGosu said:
Hmm, I just tried it on my laptop, back to stock T959V flashs just fine however I still ahve the issue of being stuck in recovery mode but I can't get T959W to work still.
Click to expand...
Click to collapse
When flash bootloaders was hit on T959V back to stock, my brother said it said "MODEM UPLOAD FAILED ENDING SESSION". My guess is that it cleared my boot loader and then since it failed while trying to upload the modem, it ended the session without readding a boot loader? It continously says "MODEL UPLOAD FAILED" Whenever I attempt to use the T959V back to stock.
The problem is you are using the V HOC's there is a package for W phones on the forums.
eollie said:
The problem is you are using the V HOC's there is a package for W phones on the forums.
Click to expand...
Click to collapse
Yes I realize that however, I checked the T959W thread and they said there were no bootloaders. And that is likely the thing that is messed up right now. Thanks for your help!
I think there's no way to flash bootloaders on W's and the package that's specifically for the W was designed just for this purpose, to bring back a phone that's messed up from attempting to flash V bootloaders. Have you tried downloading it again? If that's the only one you have trouble with maybe it's just a bad download.
---------- Post added at 11:54 PM ---------- Previous post was at 11:52 PM ----------
Oh also you can go in and uncheck flash modem on the one-click and the rest of it should work just fine. I think.
TwitchyEye said:
I think there's no way to flash bootloaders on W's and the package that's specifically for the W was designed just for this purpose, to bring back a phone that's messed up from attempting to flash V bootloaders. Have you tried downloading it again? If that's the only one you have trouble with maybe it's just a bad download.
---------- Post added at 11:54 PM ---------- Previous post was at 11:52 PM ----------
Oh also you can go in and uncheck flash modem on the one-click and the rest of it should work just fine. I think.
Click to expand...
Click to collapse
How do you disable things from being flashed on the V back to stock?
WayTooGosu said:
How do you disable things from being flashed on the V back to stock?
Click to expand...
Click to collapse
This might help me just get the boot loaders fixed!
here is the deal unless you worked some weird voodoo magic you never flashed the V's bootloaders. There is a partition in there that will not allow it to work properly.
Rereading getochkn's instructions you should not be flashing the bootloaders as he DID NOT include them. Follow his directions to the letter. Dont use the one clicks for the V. I remember chatting with him in IRC while he was trying to figure this out and he could NOT flash a hoc for the V with bootloaders successfully I dont even think it worked without bootloaders.
Hello.
My i727 was working seemingly fine. I left it to charge overnight. In the morning it was off and would not boot past the black and white samsung logo.
I have tried various battery swaps and power combinations. The recovery mode does not load past the samsung logo.
I can load the 'download OS' menu, when I continue, the text reads:
1, ddi : mmc_read failed
ODIN MODE
PRODUCT NAME: SGH-I727
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
I don't know if that means it is completely bricked? I have never attempted to root or flash custom firmware onto this device.
However, it is out of warranty, so if loading a ROM might bring this back to life, then I'm certainly willing to try.
If there is any other information you need to help me troubleshoot this please let me know.
If anyone has any advice, I would appreciate it!
Thanks!
Do a factory reset in recovery mode. If you can't do that you'll probably have to flash the stock rom with odin.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
Do a factory reset in recovery mode. If you can't do that you'll probably have to flash the stock rom with odin.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
I don't believe the recovery mode works either.
Holding VOLup + VOLdown + POWER when the device is off simply brings me to the same b/w samsung logo and does not go further.
Can you get into download mode? Have you ever used Odin?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
Do a factory reset in recovery mode. If you can't do that you'll probably have to flash the stock rom with odin.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
I was looking at flashing the stock rom as an option. I downloaded Odin3 v1.85 and the suggested stock rom via this guide:
http://forum.xda-developers.com/showthread.php?t=1342348
But, this happens.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So, I found this guide
http://forum.xda-developers.com/showthread.php?t=2023328
but including the pit file doesnt matter. Odin still crashes.
For some reason the pics don't show up. But go to the development forum for the i957 and look for vincom's stickies on odin.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
---------- Post added at 05:44 PM ---------- Previous post was at 05:40 PM ----------
Ok the pics did show up. The file you're trying to flash on odin is the problem
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
---------- Post added at 05:49 PM ---------- Previous post was at 05:44 PM ----------
Go to sammobile.com and download the stock rom. You'll have to register but it's free. It'll walk you through getting the Rom. Download the oldest. It'll be a zip file. From that zip extract the .tar.md5 file using 7-zip. Use that in Odin, PDA. Have auto reboot and f.reset checked
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
For some reason the pics don't show up. But go to the development forum for the i957 and look for vincom's stickies on odin.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
---------- Post added at 05:44 PM ---------- Previous post was at 05:40 PM ----------
Ok the pics did show up. The file you're trying to flash on odin is the problem
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
---------- Post added at 05:49 PM ---------- Previous post was at 05:44 PM ----------
Go to sammobile.com and download the stock rom. You'll have to register but it's free. It'll walk you through getting the Rom. Download the oldest. It'll be a zip file. From that zip extract the .tar.md5 file using 7-zip. Use that in Odin, PDA. Have auto reboot and f.reset checked
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Thank you for your time.
The sammobile site has 3 firmwares listed.
The oldest doesn't list a version #, is that still safe to download?
clarinch said:
Thank you for your time.
The sammobile site has 3 firmwares listed.
The oldest doesn't list a version #, is that still safe to download?
Click to expand...
Click to collapse
Get ucjk2. If you don't see that get uclf6
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
Get ucjk2. If you don't see that get uclf6
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Did all you said.
Odin still crashes at PIT mapping.
If I add the PIT file as well, it auto-checks re-partition, is that the next step?
if you got "1, ddi : mmc_read failed" u could have nand(memory) hardware failure
when trying to flash the pit file, actually called "celox.pit", repartition should not be checked, but not to sure on that for flashing the pit file
when trying to flash stock firmwares and/or recoveries and it hangs at "Getting PIT for mapping" or getting pit errors in odin, download celox.zip and "unzip" the file, select the extracted "celox.pit" file in the pit option for odin, with all other options unchecked hit the start button in odin, once flashed you can then flash the stock firmware and/or recovery in odins pda section.
thanks cschmitt
Click to expand...
Click to collapse
u can try asking cschmitt for clarification
also go through the odin troubleshooting section in the restore to stock sticky
vincom said:
if you got "1, ddi : mmc_read failed" u could have nand(memory) hardware failure
when trying to flash the pit file, actually called "celox.pit", repartition should not be checked, but not to sure on that for flashing the pit file
u can try asking cschmitt for clarification
also go through the odin troubleshooting section in the restore to stock sticky
Click to expand...
Click to collapse
Same thing. If it is a hardware failure, then that's the end of the line I guess?
I would still go through the odin ts section
can also read this http://forum.xda-developers.com/showthread.php?t=1704646
AH jijo
I have a similar problem and I thought I'd share my experience.
I have two of these phones: one is white and the other black; the black is liquid damaged, stuck in a boot loop and the white was working fine.
I have/had one goal; to transfer raw EMMC data from one phone to the other. The information on the black damaged phone is very important.
Now, I successfully made a complete backup of the damaged phone's EMMC. I then pushed that raw data onto the working white phone's EMMC.
When I tried powering on the phone with the new info the phone had the same symptoms as the black damaged device.
I then attempted to just get the white device back to its working state by trying to flash multiple stock images WITH a PIT file.
There is where I received the same error message in Odin as the OP. I then tried a 3.+ version of Odin and it finished successfully but the device still does not power up.
I am short in time so I will stop here.
Don't use a pit file. Just Odin a stock tar
Sent from my HTC One using Tapatalk 4
xcrazydx said:
Don't use a pit file. Just Odin a stock tar
I have tried with and without the pit file and still no luck.
Click to expand...
Click to collapse
I have tried with and without the pit file and still no luck.
Click to expand...
Click to collapse
Then it's user error
Sent from my HTC One using Tapatalk 4
Does the SAMSUNG logo go out and the phone keeps vibrating every few seconds? My roomates did that and nothing I did fixed it. Finally found somewhere that the power buttons on the Skyrocket gets stuck. So after about 10-15 minutes of installing the battery while flicking the button with my finger, it finally booted.
Don't know if yours is doing the same but worth a shot.
coronelac said:
I have a similar problem and I thought I'd share my experience.
I have two of these phones: one is white and the other black; the black is liquid damaged, stuck in a boot loop and the white was working fine.
I have/had one goal; to transfer raw EMMC data from one phone to the other. The information on the black damaged phone is very important.
Now, I successfully made a complete backup of the damaged phone's EMMC. I then pushed that raw data onto the working white phone's EMMC.
When I tried powering on the phone with the new info the phone had the same symptoms as the black damaged device.
I then attempted to just get the white device back to its working state by trying to flash multiple stock images WITH a PIT file.
There is where I received the same error message in Odin as the OP. I then tried a 3.+ version of Odin and it finished successfully but the device still does not power up.
I am short in time so I will stop here.
Click to expand...
Click to collapse
Just an update to my previous experience. I successfully restored the phone back to it's original state.
For anyone curious; externally re-partitioning the EMMC took care of the issue.
coronelac said:
Just an update to my previous experience. I successfully restored the phone back to it's original state.
For anyone curious; externally re-partitioning the EMMC took care of the issue.
Click to expand...
Click to collapse
im curious, explain in more detail
vincom said:
im curious, explain in more detail
Click to expand...
Click to collapse
Used JTAG to access the EMMC and execute a re-partition.
Ok, So I installed LiquidSmooth and Gapps (or at least tried) then go to the last option (Reboot System) Now its stuck doing nothing, it just sits at the blank screen, I also tried putting it in Download and Recovery Mode.
Someone out there, HELP ME.:crying:
Try going back to stock. May have been a bad flash.
DubleJayJ said:
Try going back to stock. May have been a bad flash.
Click to expand...
Click to collapse
How can I? I tried putting the device into Recovery and Download mode, it does nothing.
nconfer13 said:
How can I? I tried putting the device into Recovery and Download mode, it does nothing.
Click to expand...
Click to collapse
Not sure how it works on the SG3 but for us Sony people, all we have to do is put it in flash boot and flash a file and we are back at stock.
DubleJayJ said:
Not sure how it works on the SG3 but for us Sony people, all we have to do is put it in flash boot and flash a file and we are back at stock.
Click to expand...
Click to collapse
That is only for Sony phones.
DubleJayJ said:
Not sure how it works on the SG3 but for us Sony people, all we have to do is put it in flash boot and flash a file and we are back at stock.
Click to expand...
Click to collapse
So, I took the battery out, plugged it into my computer and my computer made a sound that something was plugged in, but it does not show the device in my files program. the LED (red) light is now off and I can not get it to boot at all. Nothing comes up on the screen.
You probably flashed the wrong Version of a Rom you'll probably have to send it to these people on the internet they fixed mine for 60 bucks because I flashed a wrong kernel and mine did the exact same thing yours is doing
Sent from my SCH-I535 using xda app-developers app
jmxc23 said:
That is only for Sony phones.
Click to expand...
Click to collapse
You guys don't have stock images and stuff? That's weird
DubleJayJ said:
You guys don't have stock images and stuff? That's weird
Click to expand...
Click to collapse
Everything gets altered by the manufacturer so just because your Sony phone has whatever it was we were discussing doesn't mean that Samsung has kept the same functions.
U need a j tag
Sent from my SCH-I535 using xda premium
jmxc23 said:
Everything gets altered by the manufacturer so just because your Sony phone has whatever it was we were discussing doesn't mean that Samsung has kept the same functions.
Click to expand...
Click to collapse
It's just a normal stock image file. Why doesn't Samsung have a stock image for their altered version of Android? Most companies do it. Motorola does it, Sony, same with my Nexus 7. It has stock images. And I'm sure they do, why don't they just release it?
Secondly, check out this thread - http://forum.xda-developers.com/showthread.php?t=2092244
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That looks like it might work. But, I dunno.
DubleJayJ said:
It's just a normal stock image file. Why doesn't Samsung have a stock image for their altered version of Android? Most companies do it. Motorola does it, Sony, same with my Nexus 7. It has stock images.
Click to expand...
Click to collapse
We do have stock image files. They are flashed by connecting the phone to a PC and using a program called ODIN. The phone must be in download mode in order to flash files though ODIN, and the OP has said he cannot get his phone into download mode. So ODIN doesn't help him at this point..Hope that helps you understand how it is done on a Samsung phone.
landshark68 said:
We do have stock image files. They are flashed by connecting the phone to a PC and using a program called ODIN. The phone must be in download mode in order to flash files though ODIN, and the OP has said he cannot get his phone into download mode. So ODIN doesn't help him at this point..Hope that helps you understand how it is done on a Samsung phone.
Click to expand...
Click to collapse
Most likely getting one soon, so that helps.
OT - It's probably bricked. Bring it to your local Verizon store and beg for mercy.
DubleJayJ said:
Most likely getting one soon, so that helps.
OT - It's probably bricked. Bring it to your local Verizon store and beg for mercy.
Click to expand...
Click to collapse
Again since you're new to the Samsung dealings with bricked phones going through Verizon is pointless if he can go to mobile tech video's website and ship them his bricked phone and they will fix it for 50 bucks.
J tag will not work I have one and it wouldn't put it in download mode so I had to send it in to mobile tech videos
Sent from my SCH-I535 using xda app-developers app
rayraycarter4 said:
J tag will not work I have one and it wouldn't put it in download mode so I had to send it in to mobile tech videos
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Um mobiletechvideos do have jtag too and why do you think people keep recommending the websites jtag services as they actually know how to use jtag. As for the matter of jtag it seems like you didn't know what you were doing when using jtag so you send it to mobiletechvideos which basically did the same thing you did but with more experience with the debugger tool.
jmxc23 said:
Um mobiletechvideos do have jtag too and why do you think people keep recommending the websites jtag services as they actually know how to use jtag. As for the matter of jtag it seems like you didn't know what you were doing when using jtag so you send it to mobiletechvideos which basically did the same thing you did but with more experience with the debugger tool.
Click to expand...
Click to collapse
I'm trying a new method, So I'll update you guys on what works and what does not.
Alrighty fellow forumers,
My Galaxy S 3 that's a Verizon flavor is solidly bricked. I've tried almost every method out there (in the wild wild Internet) and nothing has even gotten the device to turn on or flash or anything.
Here's the thing thought: When I take the battery out and plug the S3 into my computer (or wall charger), the LED (red) light comes on as if it is charging (when plugged into the computer, it actually installs the USB drivers as it is recognizing it, but ODIN saw it once before [still bricked] but doesn't anymore).
If there is any other way I can perform a different method on trying to unbrick this thing. Feel free to send me a message on here.
Thanks for all you guys help! Wish me luck and lets pray for a work around.
nconfer13 said:
Alrighty fellow forumers,
My Galaxy S 3 that's a Verizon flavor is solidly bricked. I've tried almost every method out there (in the wild wild Internet) and nothing has even gotten the device to turn on or flash or anything.
Here's the thing thought: When I take the battery out and plug the S3 into my computer (or wall charger), the LED (red) light comes on as if it is charging (when plugged into the computer, it actually installs the USB drivers as it is recognizing it, but ODIN saw it once before [still bricked] but doesn't anymore).
If there is any other way I can perform a different method on trying to unbrick this thing. Feel free to send me a message on here.
Thanks for all you guys help! Wish me luck and lets pray for a work around.
Click to expand...
Click to collapse
You are describing classic signs of a hard brick. Jtag is your only help. Contact mobile tech videos.
nconfer13 said:
Alrighty fellow forumers,
My Galaxy S 3 that's a Verizon flavor is solidly bricked. I've tried almost every method out there (in the wild wild Internet) and nothing has even gotten the device to turn on or flash or anything.
Here's the thing thought: When I take the battery out and plug the S3 into my computer (or wall charger), the LED (red) light comes on as if it is charging (when plugged into the computer, it actually installs the USB drivers as it is recognizing it, but ODIN saw it once before [still bricked] but doesn't anymore).
If there is any other way I can perform a different method on trying to unbrick this thing. Feel free to send me a message on here.
Thanks for all you guys help! Wish me luck and lets pray for a work around.
Click to expand...
Click to collapse
There is no work around you have to use jtag services to fix hardware bricks. There is one for every smartphone.