Related
I just screwed up bad. I accidently chose the wrong drive to use WIN32 Disk Imager On. I just lost 10 years worth of pictures. Is there any way to undo it? and revert my thumb drive to it's original contents?
Try a Linux disto like backtrack on a USB
Within will be a path to "data recovery" tools on the main start bar.
Use some "googleing" and ask when you get stuck, but the gist of it is:
Using the command line navigate to the drive or directory in question
If a drive; then you may have to look up how to recover lost partitions
If a directory or a folder; then you'll want to look up how to recover deleted directories
If a drive that was formatted and then written to by something else ie save something back to it; then it might be toast
With the above suggestions if you're unfimilure with command line stuff; then try google searching "backtrack recover deleted files or partitions" without the quotes and watching a few 1 or 2 minuet videos, its what I do, and then trying it out on something safe before attempting on the "target" storage source.
Hope its not toast. And let me know if you need links or get stuck.
Sent from either my SPH-D700 or myTouch3Gs
Debian Kit Install guide for all android devices that I'm writing:
http://forum.xda-developers.com/showthread.php?t=2240397
Or
https://docs.google.com/document/d/1ssVeIhdBuuy8CtpBP1lWgUkG6fR6oHxP20ToYPPw6zI/edit?usp=drive_web
Back again but to share a real working solution that another user emailed me after going through this
From Backtrack Linux... dd was able to make a forensic image of the SD card, and testdisk was able to show and save unlinked files from the image file, so we were able to get all her photos and videos back!
Click to expand...
Click to collapse
They where able to recover almost 100% of all their lost data. And I got to watch, it works
http://www.cgsecurity.org/wiki/TestDisk
Sent from either my SPH-D700 or myTouch3Gs
Debian Kit/QEMU Linux Install guide for all android devices that I'm writing:
http://forum.xda-developers.com/showthread.php?t=2240397
Now have working Installers for ARM Java 7 JDK + Maptools + jMonkey
During installation of 8.1 preview, the several automated restarts resulted in a BCD error. I was smart enough to make a backup, however it is corrupt! Just a word of caution for people. MS techs are calling me tomorrow with possible workarounds but it sounded like they were just going to ship a new device and be done with it. If anyone has any tips or ideas I'd appreciate it. I definitely don't want to ship this tablet out if I don't have to.
RT or Pro?
Kraize said:
RT or Pro?
Click to expand...
Click to collapse
32gb surface rt from usa
Wow that's odd...I just did it with no problems at all. Can you boot from USB? Because if you can, then you can just burn the rt ISO to a flash drive and recover it from there.
Oh, and btw, 8.1 makes this device at least 2 times as fast as it was out of the box. With 8.1, everything is just faster with almost no lag. So if you can, I really would recommend installing it if you get it fixed. It should only reboot twice. Once for the update, and once to set up everything.
Errored out during installation the first time for me and reinstalled my previous version of windows. Just went back in the store and reinstalled it. Worked just fine the second time. Crazy fast for me. Surface rt 32 gb.
I cant install it on mine yet, keeps saying not available at this time.
EN-GB 32 RT, have reset it and set it up as a EN-US device, got the Preview in Store but just waiting for server load to drop off I guess.
Oh, and if anyone nails the install and ends up with a dead machine, I have an EN-GB recovery link in my sig.
I also have an FTP server here in the UK with it on if people are desperate.
Trig0r said:
I cant install it on mine yet, keeps saying not available at this time.
EN-GB 32 RT, have reset it and set it up as a EN-US device, got the Preview in Store but just waiting for server load to drop off I guess.
Oh, and if anyone nails the install and ends up with a dead machine, I have an EN-GB recovery link in my sig.
I also have an FTP server here in the UK with it on if people are desperate.
Click to expand...
Click to collapse
I have your recovery file, do I just put the iso on a USB? Or do I need to make the drive bootable?
williams37 said:
I have your recovery file, do I just put the iso on a USB? Or do I need to make the drive bootable?
Click to expand...
Click to collapse
As with every other ISO on the planet, you need to use a disk imaging tool to make a bootable USB
any chance you can post your link for the recovery file? I would appreciate it if you could
jolpool said:
any chance you can post your link for the recovery file? I would appreciate it if you could
Click to expand...
Click to collapse
its in his signature
the link is taking me to another thread and there is no link there?
It shows up in the store for me when I did those four steps but the download always sais not available right now
So then I changed locale to US as suggested, the text is no longer corrupted but still won't download.
UK surface RT...and with RT you can't use iso file so store is my only option. It could just be overcrowded server but I really want the dam thing to download
Sent from my HTC One using xda premium
SixSixSevenSeven said:
As with every other ISO on the planet, you need to use a disk imaging tool to make a bootable USB
Click to expand...
Click to collapse
I didn't ask because I was being lazy, I asked because I have tried every method I can think of to boot from that iso and it still doesn't work. I can't get to anything other than the surface logo then the error. I have tried multiple ways of making that drive bootable, but whenever I start surface holding volume down, the drive will flash for about 3 seconds then cut to the BCD error. And the tool in the windows store "Windows 7 usb download" tool does not recognize the iso as a windows file and will not create the drive with it. I have tried rufus and a program called iso to usb. Drive formatted as NTSF and for the sake of not going crazy tried FAT32. Same outcome regardless of approach.
I need the link to the surface rt recovery file too. the link in the signature takes me to another thread
lilivo said:
I need the link to the surface rt recovery file too. the link in the signature takes me to another thread
Click to expand...
Click to collapse
How about you read the thread which then has the link in it.
Rocket science at its best
Maybe I should just have the file in my FTP and a direct link in my sig, perhaps that'd be easier lol
williams37 said:
I didn't ask because I was being lazy, I asked because I have tried every method I can think of to boot from that iso and it still doesn't work. I can't get to anything other than the surface logo then the error. I have tried multiple ways of making that drive bootable, but whenever I start surface holding volume down, the drive will flash for about 3 seconds then cut to the BCD error. And the tool in the windows store "Windows 7 usb download" tool does not recognize the iso as a windows file and will not create the drive with it. I have tried rufus and a program called iso to usb. Drive formatted as NTSF and for the sake of not going crazy tried FAT32. Same outcome regardless of approach.
Click to expand...
Click to collapse
Same for me. I guess the drive needs the bootfiles for an RT device. If you make an usb-drive bootable on an x86/x64-system, the drive will contain code that can't run on ARM.
If anyone knows how to make the drive bootable for RT, I'd really like to know as well.
Just copy the files in the recovery to a fat32 formatted usb drive, then hold the volume down button plus power button, this will take time to boot but its normal. I already have my own recovery on a usb stick, but never deleted the built in one. Tried installing this on an x86 netbook but the wim file isn't recognized.
If anyone else is having trouble installing the RT preview, there's a way to change the base language. First is installing a language pack (US) and setting it as default language, then changing something in the registry with the name InstallLanguage and changing its value to 0409.
downloaderintruder said:
Just copy the files in the recovery to a fat32 formatted usb drive, then hold the volume down button plus power button, this will take time to boot but its normal. I already have my own recovery on a usb stick, but never deleted the built in one. Tried installing this on an x86 netbook but the wim file isn't recognized.
If anyone else is having trouble installing the RT preview, there's a way to change the base language. First is installing a language pack (US) and setting it as default language, then changing something in the registry with the name InstallLanguage and changing its value to 0409.
Click to expand...
Click to collapse
Thank you! and without the condescending tone even. This is exactly what I needed. Back up and running thanks to this.
Well, I write this with the faith that someone can help me. Try to change the ROM of a Chinese cell (this model is supposed to be ALPS K10, but since check the computer and opening applications, I realized that this might not be the model name, Besides, it is supposed to be a clone of the last LG K10). Try changing the rom as they passed many things
- Said he was 8 gb storage, when he was only 4 gb (same for the ram, said it was 1 gb, when only has 512 mb)
- When installed a .obb apk data (cache), ie a pirated app of the many pages that are on the network, moving his data to the "Memory", and installed the apk, the question was that when starting the game and in spite of having the data obb in the folder, the game would not start, but if you disabled external sd (where by the way, when you install the apk this created a folder for meta data there, when the he had internal memory) started the game normal, the same as the file was in obb
- There was no way multitasking use (it awarded 512 of ram and software)
- Mentioning again giving false data (internal storage, ram, etc, which awarded the modified software or something more)
Well, the point I want to make is that because of all these problems decides to flash the rom a very similar device (I mean also that I could not make a backup of the rom because even though I had all the drivers, tools and other the mtkdroid application tools I would not allow it, and neither could I make a copy of the IMEI that like applications pc applications android (mobileuncle for example) I permitted (device not compatible. Download the rom BLU NEO X, who was one of the many devices SoC MT6580 and 512 of ram (at least that's what I saw), and try to install with SP flashtool, flashing came out successful, but when I followed the footsteps of another forum, saying he should disconnect after it leaves the window "success", the phone no longer worked.
If anyone can help me giving me ideas where else can I find the stock rom of that device, or if there is any way to revive the less in recovery to try to do something, please do so; It is that it is forbidden rom's asking in this forum, but after searching for several days, you can say I'm already losing hope
Deputy something more for direct purposes if anyone knows, incidentally, how to solve this error, because the pc if it recognizes the COM port to connect the mobile bricked, so, I guess there must be some way to fix it:
BROM ERROR: S_FT_ENABLE_DRAM_FAIL (0XFC0)
EMI: Enable DRAM Failed!
HINT: Please check your load to your target matches Which is to be downloaded
Sorry for the faults that can be found in this text, but I used google translator to write because my English is not very good, even so, I wish you can help me
thanks, and help me!
Hi
Try asking in the link below. Hopefully someone will be able to help you
http://forum.xda-developers.com/android/help
Good luck
Have you ever worked on something really important for the longest time only to find that you accidentally deleted it? Or the lights just went off and corrupted your hard disk? maybe the SD card just gave up? or you are attacked by a virus which made all your files non-accessible? I’m sure in this age of digital technology everyone might have faced this issue in one way or another. But don’t worry, today, we bring an end to all of these problems. Here’s our ultimate guide on how to recover the deleted files on Mac. If you have been looking for a way to do the same on an Android device or a Windows PC, read this tutorial.
Best Software to Recover deleted files on Mac
There is quite a few software in the market which offers the functionality to recover data on your machine but today we are going to talk about Recoverit by Wondershare. Wondershare has been popular for creating unique solutions in different verticles of Tech domain like Filmora for editing, Dr. Fone for anything and everything related to smartphones, PDFelement for documentation and Recoverit for data recovery. It is available on Windows as well as Mac. Today, we will help you with the guide on how you can recover deleted files on Mac.
How to Recover deleted files on Mac using Recoverit
Launch the Recoverit Mac App and select the source from where you want to recover files.
You can undo empty Trash on Mac, and recover files from a formatted disk, lost partition, an external device, etc. For this guide, we will help you with the steps to recover data you deleted from your trash on Mac but you can select the source from where you want to recover data as shown in the image below.
Once you select the source, Recoverit will start its scan and show you the files which are recoverable from your machine.
Mod Edit:- Links Removed & Thread Closed.
It looks like following the official instructions on wiki.lineageos . org/devices/I01WD/install can brick your device if you're unlucky - at least for me, the bootloader seems to have vanished; trying to boot will just return a black screen. So, I looked for unbricking instructions. Unfortunately, the only two I found were getdroidtips . com/unbrick-zenfone-6-asus-6z-qdloader-9008-mode/ and piunikaweb . com/2019/10/24/unbrick-asus-zenfone-6-asus-6z/, which both use BAT scripts. I only use Linux, which doesn't support such scripts, and I'm not familiar with the Windows shell. I wondered whether anyone here could convert the instructions for Linux? The driver installation shouldn't be a problem, as Linux is monolithic and lsusb shows the Qualcomm modem being in QDL mode (I suppose that's the same as QDLoader 9008/EDL?). (remove the spaces from the links)
FantasyCookie17 said:
It looks like following the official instructions on wiki.lineageos . org/devices/I01WD/install can brick your device if you're unlucky - at least for me, the bootloader seems to have vanished; trying to boot will just return a black screen. So, I looked for unbricking instructions. Unfortunately, the only two I found were getdroidtips . com/unbrick-zenfone-6-asus-6z-qdloader-9008-mode/ and piunikaweb . com/2019/10/24/unbrick-asus-zenfone-6-asus-6z/, which both use BAT scripts. I only use Linux, which doesn't support such scripts, and I'm not familiar with the Windows shell. I wondered whether anyone here could convert the instructions for Linux? The driver installation shouldn't be a problem, as Linux is monolithic and lsusb shows the Qualcomm modem being in QDL mode (I suppose that's the same as QDLoader 9008/EDL?). (remove the spaces from the links)
Click to expand...
Click to collapse
Would this help you?
https://forum.xda-developers.com/zenfone-6-2019/how-to/guide-unbricking-zs630kl-t3998767
Or this:
https://forum.xda-developers.com/zenfone-6-2019/how-to/qdloader-brick-t3980165
I am sure you can easily read windows batch and convert them to your favorite shell language. I suppose it is simply a list of adb and fastboot commands. I don't know if I actually can help, but I'll be available for discussion, if you have any problems during your try with either of the two options above.
abprie said:
Would this help you?
https://forum.xda-developers.com/zenfone-6-2019/how-to/guide-unbricking-zs630kl-t3998767
Or this:
https://forum.xda-developers.com/zenfone-6-2019/how-to/qdloader-brick-t3980165
I am sure you can easily read windows batch and convert them to your favorite shell language. I suppose it is simply a list of adb and fastboot commands. I don't know if I actually can help, but I'll be available for discussion, if you have any problems during your try with either of the two options above.
Click to expand...
Click to collapse
The first links seems to be basically the same as what I found. The last one only works if the bootloader is still there, which is not the case. That's also the reason why I think, while not actually had looked into them, that it's not just adb and fastboot commands (those won't work anymore with my device). ADB only works in Android, and fastboot only in the bootloader. But yes, I'll look into it and see if I can do anything.
So, after looking into it, I noticed I basically understand even less of that script than I do understand Unix shells. I guess I'll probably ask in that thread however, as this seems to be the original developer of the script(s). (actually, there's several scripts, XMLs and so on there)
I had a quick look at the update_image_EDL.bat file and noticed that the file itself calls an executable in Windows format. I guess this won't be easy to convert.
But did you try to run this in wine?
I believe the best solution to your problem would be a VM with Windows 10 installation and USB support.
aleksander002 said:
I believe the best solution to your problem would be a VM with Windows 10 installation and USB support.
Click to expand...
Click to collapse
This would require the OP to own a win10 version and if that was the case, (s)he could also boot from a installation disk and run the scripts on a live boot. But still, maybe a true Windows version is required.
As far as I know, Windows 10 is free to install without key and it will be legal as a short-period evaluation copy.
aleksander002 said:
As far as I know, Windows 10 is free to install without key and it will be legal as a short-period evaluation copy.
Click to expand...
Click to collapse
True, might work...
So, while QFIL.exe would start with wine and Mono (apparently it's a .NET application) installed, it wasn't actually able to connect to the phone (I think direct hardware access is one of the things WINE cannot really do anyway). Thus I tried the suggestion with Windows in a VM and USB redirection, however, I got `ERROR: function: sahara_rx_data:277 Unable to read packet header. Only read 0 bytes.` and some other errors after this which were apparently caused by the first error when executing the `update_img_EDL` script. I found another solution that may possibly work: Using https://www.96boards.org/documentation/consumer/guides/qdl.md.html, however I don't really know which partitions I need, and which XML files I should use from the many that are present in the zip file. The signed ELF programmer is apparently `prog_firehose_ddr.elf`, at least that's what the script seemed to use.
EDIT: Looks like some people in the original thread are having the same issue as I do.
FantasyCookie17 said:
So, while QFIL.exe would start with wine and Mono (apparently it's a .NET application) installed, it wasn't actually able to connect to the phone (I think direct hardware access is one of the things WINE cannot really do anyway). Thus I tried the suggestion with Windows in a VM and USB redirection, however, I got `ERROR: function: sahara_rx_data:277 Unable to read packet header. Only read 0 bytes.` and some other errors after this which were apparently caused by the first error when executing the `update_img_EDL` script. I found another solution that may possibly work: Using https://www.96boards.org/documentation/consumer/guides/qdl.md.html, however I don't really know which partitions I need, and which XML files I should use from the many that are present in the zip file. The signed ELF programmer is apparently `prog_firehose_ddr.elf`, at least that's what the script seemed to use.
EDIT: Looks like some people in the original thread are having the same issue as I do.
Click to expand...
Click to collapse
Sorry for the late reply. Could you find out what kind of dragonboard the zenfone 6 has? I guess that will give you a clue through the manual linked at the end of you referenced threat.
Oh, and did you try to just install a win10 version as suggested before?
abprie said:
Sorry for the late reply. Could you find out what kind of dragonboard the zenfone 6 has? I guess that will give you a clue through the manual linked at the end of you referenced threat.
Oh, and did you try to just install a win10 version as suggested before?
Click to expand...
Click to collapse
Afaik Dragonboard is just the name of that line of SBCs which also uses Qualcomm SoCs. So while the Zenfone very likely doesn't use a Dragonboard as PCB, the SoC modes and such should be similar. The device-specific instructions most likely won't work, however the software should work on all Qualcomm-based boards.
I didn't try to install Windows 10 on my PC, however I also tried it at a friend's PC with W10, where I got the same error.
FantasyCookie17 said:
I didn't try to install Windows 10 on my PC, however I also tried it at a friend's PC with W10, where I got the same error.
Click to expand...
Click to collapse
Meaning that even the Windows scripts that reflash the bootloader did not work?
Interesting. Looks like the issue was the cable; it worked with a different one (though both cables had both data and power lanes).
I'm in the same situation, with a dead Zenfone6 and only a Linux desktop.
Was there a way to bring it back to life?
Marlin79 said:
I'm in the same situation, with a dead Zenfone6 and only a Linux desktop.
Was there a way to bring it back to life?
Click to expand...
Click to collapse
See the original thread which was linked here. (the cable I originally used did not work, however it wasn't the original one that came with it) The only way I see is downloading the Windows installer and starting that in a VM with USB redirection (e.g. use QEMU/KVM and virt-manager). Then install Windows in that VM (if you don't want to create a Microsoft account, disconnect from the internet before it asks you to do so), and then follow all the instructions in the original thread.
FantasyCookie17 said:
See the original thread which was linked here. (the cable I originally used did not work, however it wasn't the original one that came with it) The only way I see is downloading the Windows installer and starting that in a VM with USB redirection (e.g. use QEMU/KVM and virt-manager). Then install Windows in that VM (if you don't want to create a Microsoft account, disconnect from the internet before it asks you to do so), and then follow all the instructions in the original thread.
Click to expand...
Click to collapse
My Asus brick has been lying in my drawer for a while but I had a bit of spare time so I thought to see what I could do with it. I have a bit of spare parts so I put together a bare bone computer and installed Windows 10 on it (the windows installer iso-file from microsoft.com)
I then tried to follow this guide https://forum.xda-developers.com/zenfone-6-2019/how-to/qdloader-brick-t3980165
But when running the update_image_EDL.bat script I get "Environment variable _COM not defined". The USB cable I'm using is the one that came with the phone.
I know next to nothing about Windows. Somebody who has an idea what to do about that error message?
Marlin79 said:
My Asus brick has been lying in my drawer for a while but I had a bit of spare time so I thought to see what I could do with it. I have a bit of spare parts so I put together a bare bone computer and installed Windows 10 on it (the windows installer iso-file from microsoft.com)
I then tried to follow this guide https://forum.xda-developers.com/zenfone-6-2019/how-to/qdloader-brick-t3980165
But when running the update_image_EDL.bat script I get "Environment variable _COM not defined". The USB cable I'm using is the one that came with the phone.
I know next to nothing about Windows. Somebody who has an idea what to do about that error message?
Click to expand...
Click to collapse
Yes. Happened to me, too. The problem was that the phone is not recognized as a Qualcomm device in Windows. I had to open it and bridge two points on the board. See this: https://forum.xda-developers.com/showpost.php?p=82965385&postcount=66
I finally got to the stage where i could execute update_image_EDL.bat script
It ran for a minute or so but then terminated in an error.
Code:
13: E:\firmware\prog_firehose_ddr.elf
06:28:01: ERROR: function: sahara_rx_data:277 Unable to read packet header. Only read 0 bytes.
06:28:01: ERROR: function: sahara_main:983 Sahara protocol error
06:28:01: ERROR: function: main:320 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Fail:Process fail
Finish Download
Unhandled Exception: System.DllNotFoundException: Unable to load DLL 'QMSL_MSVC10R.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)
at QC.QMSLPhone.Phone.QLIB_DisconnectAllServers()
at QC.QMSLPhone.Phone.DisconnectAllServers()
at QC.QMSLPhone.Phone.Finalize()
2020-07-11 06:28:02.931 Download Fail:Sahara Fail:QSaharaServer Fail:Process fail
press any key to continue . . .
Any ideas what that is about? The file it mentions QMSL_MSVC10R.dll does exist in the firmware directory