Related
Hello everyone! Today I accidentally flashed a stock ROM (with stock bootloader) of Samsung i9020T on my Samsung i9023 and the result is that no longer turn on! Do you think I can solve with an USB Jig? If there were no other chances, can I send it to Samsung assistance?
P.s. sorry for my english
Can you get to download mode?
mabry said:
Can you get to download mode?
Click to expand...
Click to collapse
No, I cannot access either to the fastboot mode, or in recovery!! To access to download mode, I ordered an USB Jig on ebay, but it will arrive next week! Do you know if it works?
Thanks
There is a gnu/linux tool called unbrickableMod by adam outler, it can be found from android development section. Try that.
Sent from my Nexus S using XDA
jishnu7 said:
There is a gnu/linux tool called unbrickableMod by adam outler, it can be found from android development section. Try that.
Sent from my Nexus S using XDA
Click to expand...
Click to collapse
I saw that but I think it doesn't work because my smartphone doesn't turn on..
Because i red this on the thread:
If your phone is showing anything on-screen, this tool is not for you.
Click to expand...
Click to collapse
Do you know if I can repair my Nexus using an USB Jig to enter in download mode?
CescoMn said:
No, I cannot access either to the fastboot mode, or in recovery!! To access to download mode, I ordered an USB Jig on ebay, but it will arrive next week! Do you know if it works?
Thanks
Click to expand...
Click to collapse
Hi Cesco, sorry for your problem. I thought that if the rom would have been not suitable for the phone it would have advice you. Can I ask you the link of the jig you bought? I think is good to always have one...
foxmolder1985 said:
Hi Cesco, sorry for your problem. I thought that if the rom would have been not suitable for the phone it would have advice you. Can I ask you the link of the jig you bought? I think is good to always have one...
Click to expand...
Click to collapse
Hi, I bought it on ebay.it! I can't post the link beacuse i'm new on XDA so I write it without http: bit.ly/wSobGE
I installed the rom through CWM Recovery and it doesn't say anythink! The ROM is Gingerbread Stock 2.3.1 for Samsung Nexus S i9020! What do you think about?
Thanks!
CescoMn said:
Hi, I bought it on ebay.it! I can't post the link beacuse i'm new on XDA so I write it without http: bit.ly/wSobGE
I installed the rom through CWM Recovery and it doesn't say anythink! The ROM is Gingerbread Stock 2.3.1 for Samsung Nexus S i9020! What do you think about?
Thanks!
Click to expand...
Click to collapse
Thank you Cesco! I think that if it doen't turn on, there's not other choice to use the Jig to turn it in download mode!
Anyway, are you the cesco of androidiani.com? If you solve you problem, you have to implement unbricking in your tool!
foxmolder1985 said:
Thank you Cesco! I think that if it doen't turn on, there's not other choice to use the Jig to turn it in download mode!
Anyway, are you the cesco of androidiani.com? If you solve you problem, you have to implement unbricking in your tool!
Click to expand...
Click to collapse
Ok, but I'm not sure that I can solve with the JIG!
Yes, I'm on Androidiani.com, but my tool can't solve an hard brick because are needed the JIG Usb and (if it works) ODIN Downloader, to reflash the bootloader.
If I can resurrect my phone I could write a tutorial to help the users with a problem like the mine..
Anyway I haven't yet figured out if, with the jig is 100% sure that I solve this problem. Have you never used it?
Thanks!
CescoMn said:
Ok, but I'm not sure that I can solve with the JIG!
Yes, I'm on Androidiani.com, but my tool can't solve an hard brick because are needed the JIG Usb and (if it works) ODIN Downloader, to reflash the bootloader.
If I can resurrect my phone I could write a tutorial to help the users with a problem like the mine..
Anyway I haven't yet figured out if, with the jig is 100% sure that I solve this problem. Have you never used it?
Thanks!
Click to expand...
Click to collapse
No, Cesco. I'm a lucky man and never needed this Jig. But you know, for only 3euros I want to be ready for the worst. I usually flash a lot. Let me know if it work!
Ok, last question, I found a post on androidiani.com says that in this case, the jig is not working, so, do you think that Samsung assistance accepts it?
CescoMn said:
Ok, last question, I found a post on androidiani.com says that in this case, the jig is not working, so, do you think that Samsung assistance accepts it?
Click to expand...
Click to collapse
I really don't know the warranty policy, but consider the warranty as the last thing. Try that jig, then you'll see what to do. The pc cannot see the phone plugged to usb neither with the PdaNet?
Try to open a thread on androidiani, maybe there's someone that have had your same experience!
CescoMn said:
I saw that but I think it doesn't work because my smartphone doesn't turn on..
Because i red this on the thread:
Do you know if I can repair my Nexus using an USB Jig to enter in download mode?
Click to expand...
Click to collapse
I had the same problem, not turning on my phone. I fixed it with that tool. That helps to turn on device to the bootloader mode. And we can flash boot loader and recovery from their.
Sent from my Nexus S using XDA
okay, so this issue is quite common now, i just got my tf201 stuck in the splash screen and its bricked.
i have read like 14 threads about this problem and there is no solution.........
i just want to ask that if anybody found any solution, if not ,will it be fixed by developers in the upcoming two months or is it a permanent brick ???
please help, this tablet is important to me :crying: !!!
hassanman1997 said:
okay, so this issue is quite common now, i just got my tf201 stuck in the splash screen and its bricked.
i have read like 14 threads about this problem and there is no solution.........
i just want to ask that if anybody found any solution, if not ,will it be fixed by developers in the upcoming two months or is it a permanent brick ???
please help, this tablet is important to me :crying: !!!
Click to expand...
Click to collapse
Have you tried this method?
Theonew said:
Have you tried this method?
Click to expand...
Click to collapse
i can not go into fastboot, apx is the only option i have
please somebody help me this is the only thing i have .....
hassanman1997 said:
i can not go into fastboot, apx is the only option i have
please somebody help me this is the only thing i have .....
Click to expand...
Click to collapse
Do you still have a warranty on the Tab?
Sidenote - Do not double post.
Theonew said:
Do you still have a warranty on the Tab?
Click to expand...
Click to collapse
no i dont ..........
please help
hassanman1997 said:
no i dont ..........
please help
Click to expand...
Click to collapse
What occurs when you attempt the command from "Update 2?"
Theonew said:
What occurs when you attempt the command from "Update 2?"
Click to expand...
Click to collapse
nothing happens because i cant even do update 2 because i cant go into fastboot....:crying:
i can only go into apx, somehow the tablet can be fixed from apx i just dont know ..
somebody help .......
hassanman1997 said:
nothing happens because i cant even do update 2 because i cant go into fastboot....:crying:
i can only go into apx, somehow the tablet can be fixed from apx i just dont know ..
somebody help .......
Click to expand...
Click to collapse
Its best if you state your issue in your device's section for further/better assistance.
I dont know if this has been fixed yet, but did you setup nvflash prior to your bricking?
If so then you should be able to use your backup files to recover easily?
Hello, everyone. I've got a trouble with my at&t atrix 2. I've cm10 onboard and when I tried to flash another rom on it I found that nothing changes. Reading similar problem threads I realized that the problem is in NAND, which is in R/O mode. And every change in internal storage restores after the phone reboot. Does anyone have a solution for this ? Plz help.
Ramieres1 said:
Hello, everyone. I've got a trouble with my at&t atrix 2. I've cm10 onboard and when I tried to flash another rom on it I found that nothing changes. Reading similar problem threads I realized that the problem is in NAND, which is in R/O mode. And every change in internal storage restores after the phone reboot. Does anyone have a solution for this ? Plz help.
Click to expand...
Click to collapse
fxz back to stock and start again maybe the best solution for any kind of problem...
that what I will do if something goes wrong with my A2
Az-one786 said:
fxz back to stock and start again maybe the best solution for any kind of problem...
that what I will do if something goes wrong with my A2
Click to expand...
Click to collapse
Nope. Nothing changes yet.
Ramieres1 said:
Nope. Nothing changes yet.
Click to expand...
Click to collapse
What method you are using?
Use BMM only.....here is the link......http://forum.xda-developers.com/showthread.php?t=2602229
Atrix2dBeast said:
What method you are using?
Use BMM only.....here is the link......http://forum.xda-developers.com/showthread.php?t=2602229
Click to expand...
Click to collapse
The problem is probably in NAND-flash. It is in read-only mode because of an error, I guess. So I can noy boot into BMM recovery. Maybee it will be easier to replace mainboard from anoter A2 ?
Hi my name is Felix. please i need your assistance. recently, i rooted my phone (tecno product o.s 4.2.2) and was trying to install a software called chainfire 3d but on installing it and restarting my phone it got stocked in the Tecno logo. please i need your help in restoring my phone back.
Do a factory reset!
Rodrigo Porto said:
Do a factory reset!
Click to expand...
Click to collapse
believe me have tried it but up to no good. please what else can i do about it.
joeboy300 said:
believe me have tried it but up to no good. please what else can i do about it.
Click to expand...
Click to collapse
Reflash your factory OS. Only option you got. I would be careful flashing things to a device like that one
zelendel said:
Reflash your factory OS. Only option you got. I would be careful flashing things to a device like that one
Click to expand...
Click to collapse
please how do i do that.
joeboy300 said:
please how do i do that.
Click to expand...
Click to collapse
By doing the research you need to do. You will have to track down the info for your device. It is different for each device. After a minor search for the device. I would contact them OEM Techno about it. And to be honest if you get it fixed avoid flashing anything to it ever again.
More info
What is your phone model?
Hello! My device wifi just stopped turning on, and I did reset networking config but that didn't solve the problem, so I reset It. Now I have a device with no networking at all, and now it's also locked because I didn't sign out of my xiaomi account. I wanted to unlock the device and try another rom to see if that solves the problem, but I can't do that since I need first activate the device.
About the device:
-No root
-No developer options enabled
-Wifi doesn't toggle on
-Sim card is not recognized (already tried other ones, in both slots)
-Xiaomi assistance doesn't want to help me at all (neither the seller btw)
I hope you guys could help me. I'm very frustrated because it's a recent new phone :c
It maybe hardware issue
Nitin Rai said:
It maybe hardware issue
Click to expand...
Click to collapse
I'm praying not to be :c
vhviveiros said:
I'm praying not to be :c
Click to expand...
Click to collapse
Are you able to unlock phone. If yes then you can test the things through QC test by typing this in dialer *#*#64663#*#*
Nitin Rai said:
Are you able to unlock phone. If yes then you can test the things through QC test by typing this in dialer *#*#64663#*#*
Click to expand...
Click to collapse
I cant unlock it :c
But before messing with this lock, I tried to test wifi but without success...
As mentioned in a thread, an update could solve the problem, but I need to unlock the bootloader
vhviveiros said:
I cant unlock it :c
But before messing with this lock, I tried to test wifi but without success...
As mentioned in a thread, an update could solve the problem, but I need to unlock the bootloader
Click to expand...
Click to collapse
Have you thought about EDL or Test point method. I think it is the last option
Nitin Rai said:
Have you thought about EDL or Test point method. I think it is the last option
Click to expand...
Click to collapse
That one in settings > about phone > kernel press x5 > wifi
vhviveiros said:
That one in settings > about phone > kernel press x5 > wifi
Click to expand...
Click to collapse
By EDL, I mean a kind of brute force to flash ROM. Used mainly when hard bricked. As you don't have unlock permission you have to use this method to flash Factory ROM. You can find Instructions in YouTube videos for "Redmi Note 6 pro EDL flashing guide Test point method"
Nitin Rai said:
By EDL, I mean a kind of brute force to flash ROM. Used mainly when hard bricked. As you don't have unlock permission you have to use this method to flash Factory ROM. You can find Instructions in YouTube videos for "Redmi Note 6 pro EDL flashing guide Test point method"
Click to expand...
Click to collapse
Thaanks! I'll try It later and tell you if that solves my problem hahah
vhviveiros said:
Thaanks! I'll try It later and tell you if that solves my problem hahah
Click to expand...
Click to collapse
Ya. Tell us and Good luck
Nitin Rai said:
Ya. Tell us and Good luck
Click to expand...
Click to collapse
Thank you!
I've just bought a smartphone repair toolkit from Amazon, and I'm waiting for it because I don't have the needed tools to open the device and do the EDL by myself. It might get here around next week, and when done, I say if that worked.
Nitin Rai said:
Ya. Tell us and Good luck
Click to expand...
Click to collapse
I tried the EDL test points, but the device doesn't vibrate and turn on :c
EDIT: I was doing it wrong, I need firstly to connect the pins, and juts then connect the USB cable. I was doing the opposite hahaha
Windows Device Manager does recognize it, but Mi Flash still doesn't recognize the device on refresh, giving the error "length cannot be less than zero". I'm doing some search.
vhviveiros said:
I tried the EDL test points, but the device doesn't vibrate and turn on :c
EDIT: I was doing it wrong, I need firstly to connect the pins, and juts then connect the USB cable. I was doing the opposite hahaha
Windows Device Manager does recognize it, but Mi Flash still doesn't recognize the device on refresh, giving the error "length cannot be less than zero". I'm doing some search.
Click to expand...
Click to collapse
Try using another flash tool like Qfil
Nitin Rai said:
Try using another flash tool like Qfil
Click to expand...
Click to collapse
I read somewhere that the cause could be USB 3.0. So I tried on my laptop, and the flashing worked! Now networking is up again!!!
Obs.: I used the latest global stable ROM
Thank everyone for helping <3
Oh. Noice!
Nitin Rai said:
Oh. Noice!
Click to expand...
Click to collapse
Now I just don't want how to make as solved... is there a way? And a way to say that you helped to solve it
vhviveiros said:
Now I just don't want how to make as solved... is there a way? And a way to say that you helped to solve it
Click to expand...
Click to collapse
You can just edit the post and write solved if that's possible. No need to write my name..lol
vhviveiros said:
I read somewhere that the cause could be USB 3.0. So I tried on my laptop, and the flashing worked! Now networking is up again!!!
Obs.: I used the latest global stable ROM
Thank everyone for helping <3
Click to expand...
Click to collapse
Could you write your source, im nota ble to flash my phone in EDL mode, due to authentification issue ...
xer094 said:
Could you write your source, im nota ble to flash my phone in EDL mode, due to authentification issue ...
Click to expand...
Click to collapse
Actually, after flashing a new rom, after 12h the wifi issue returned, and I used this tool: https://www.xiaomitool.com/V2/
I used the option to flash an official rom, followed the app steps, and after the download finished, it couldn't be installed because of a bug So I repeated the steps, but instead of downloading again, i used the already downloaded rom (it is in the app installation folder). Then, success! Has been 2 days with no problem
About the auth itself, even by using EDL, after the reboot, I was prompted again by the mi account... So if you don't have the account, I'm afraid I can't help you... :c
I used this tutorial for the EDL: https://www.youtube.com/watch?v=7WfOprRVQww