Hey guys,
This is a possible fix for anyone who is experiencing all of the following issues. If you are NOT experiencing all of these issues then my fix is most likely not the cause of your problem.
1) Can't boot into ROM (phone will get no farther than GALAXY S III logo)
2) Can't boot into RECOVERY (phone will try to boot into recovery but will never make it)
3) Can't boot into DOWNLOAD (you may get as far as the caution screen but phone will turn off)
4) Phone starts, then turns off after about 3 seconds.
The solution that worked for me involves the power switch. It turns out that the reason you are unable to boot is because your power button is constantly being pressed due to a "sticky" button. This is a hardware flaw with only a temporary solution.
Steps to FIX issue.
1. Use fingernail to gently remove POWER BUTTON from phone. Notice that the bumps in the middle of the button are a little off-center.
2. Use a pair of fine tip tweezers to gently PULL on the yellowish/white POWER SWITCH inside the phone.
3. Test the fix by reinserting the battery. If the phone doesn't auto boot then press the POWER SWITCH with the end of your tweezers.
4A. If phone continues to power cycle then return to step 2.
4B. If phone properly boots then reinsert the POWER BUTTON with bumps in the middle aligned with the POWER SWITCH. If you don't align the bumps then the button will not function properly.
Once again, if this fix did not work for you then your problem is most likely in software (bootloader) and not hardware.
Hope this helps someone. Cheers! :highfive:
Think this post might help
This is the problem I'm having from the sound of it. I haven't had any problems for the last three weeks I've been using LiquidSmooth and it doesn't act like a ROM problem. I noticed the power button wouldn't shut my screen off today out of the blue. I thought it was strange so maybe wipe cache and dalvik just in case... No Dice.
Stuck in a vibrating boot loop from there even after each attempted battery pull. However somehow I was able to finally get the phone to boot by holding the right button combo to get download mode... Waiting for it to restart right away then doing another battery pull... This let's it boot and has worked half a dozen times tonight...
Soooo... pull the power button off with fingernails? Serious? I've had the phone a month and a half maybe so would like to know this happens without breaking any additional connections or whatever if that makes sense... Thanks for the post.
Related
I did a search but no solutions came up.
Basically, when I touch the screen to move the little lock icon over to unlock it nothing happens.
I powered it off by holding power for 10 seconds and then powered it on again.
No bueno, nothing happened.
Anyone else run into this and was able to solve it?
yes, i had the same problem, you will not like this..
do one step at the time and check if it works, if not continue to the next one
1. cold reboot (hold power button for 30-60 seconds),
you can try step 1 several times
2. turn it off, let it charge for 2-3 hours, turn it on
3. reboot to safe mode (this not really sure how i did it..lol.. i think is, turn off and turn on and quickly hold both volume keys until it boots up, if you did it correctly it will boot and say "safe mode" at the bottom left corner).
4. reset to factory settings, hold volume (-) and power key at the same time, (this will erase everything)
when i had this problem, i actually had to cold rebooted several times and reboot into safe mode after step 4 to have the touchscreen working again..I was about this close () to give up and return it to walmart..
I had the same thing happen to me, and all the rebooting in the world couldn't fix it. I don't know if you're still on stock rom or not, but what I did was reflashed the Prime rom and it worked again.
Nothing helped, even hard wipe.
Returned the TF.
I had this same problem... Unfortunately the only thing that worked was letting the power drain out. That was a huge pain because the Transformer has a killer battery and there are only so many times you can turn the screen on and off to drain it. It took about 4-5 days to fully drain. After that point I had upgraded to 3.1 and it has worked flawlessly since then... definitely a firmware problem not hardware.
The power button on my phone recently has stopped working. I need to get it warrantied, but I am running CM 10.2. I need to Odin back to stock, but I can not get into Download Mode or the recovery. When I go into Download mode, the initial screen pops up, the one where you choose to hit up to continue, or down to reboot normally. After I hit up, the screen goes black and nothing happens.
I really need to get back to stock, as Bestbuy are being dicks, and demanding I do a factory reset before they send my phone in.
Anything? I still need help on this.
Pompsy said:
Anything? I still need help on this.
Click to expand...
Click to collapse
This has been covered at least 10 times in the past few months we need a sticky. Take your battery out hold your phone so the power button is facing a table or floor and slam that side a few times it should work again (Temporary). You might need to hit it on the surface really hard 10-20 times before it works. Just not to hard or else you might crack the screen. I used a mouse pad to soften the impact. This trick no longer works for me so I ripped the button off. After about a month of doing this I needed to use things that would only hit the button to make it work. About a month after that nothing worked so I just took it off the motherboard and now boot from a off state by plugging into the wall and enter odin mode deny the prompt and it kicks me into a workable state.
ThePagel said:
This has been covered at least 10 times in the past few months we need a sticky. Take your battery out hold your phone so the power button is facing a table or floor and slam that side a few times it should work again (Temporary). You might need to hit it on the surface really hard 10-20 times before it works. Just not to hard or else you might crack the screen. I used a mouse pad to soften the impact. This trick no longer works for me so I ripped the button off. After about a month of doing this I needed to use things that would only hit the button to make it work. About a month after that nothing worked so I just took it off the motherboard and now boot from a off state by plugging into the wall and enter odin mode deny the prompt and it kicks me into a workable state.
Click to expand...
Click to collapse
I can get into the system just fine. When I go into the recovery or download mode, it doesn't stay in that mode. I tried the banging thing, and it made my power button go from intermittently working, to not working at all.
keep doing it until it works. The button is sticking that is why it reboots/stopped working.
Pompsy said:
I can get into the system just fine. When I go into the recovery or download mode, it doesn't stay in that mode. I tried the banging thing, and it made my power button go from intermittently working, to not working at all.
Click to expand...
Click to collapse
It sounds like your power button is physically broken, and it is activating intermittently, which is stopping the phone from entering download mode. My only experience with this problem is my own phone but ultimately mine got so bad that I had to rip the button off the motherboard, as ThePagel did. Your symptoms sound the same as mine.
You can try this procedure to get into recovery, which works for me without a power button. You will probably have the same problem you are having now with the phone rebooting on its own before you actually get into recovery, because the power button is activating.
1. Take the battery out of the phone and unplug it from USB power.
2. Plug in USB power.
3. While holding down the volume-down button and the Home button, insert the battery (this is a little tricky).
4. The phone should start and warn you that you are entering Download mode. If you want to use Odin to return to stock, do that now.
5. If you want to get into Recovery instead, press Volume Down to reboot and then *immediately* push and hold Volume Up and Home simultaneously. The phone should reboot into recovery. Mine does.
If that doesn't work, and you can't get a new phone without returning it to stock, then prying the power button off the phone's motherboard may be your only solution.
I honesty don't know how to describe my problem so I guess I will just tell you whats happening and what I know about my phone.
My phone:
Unlocked Verizon Galaxy S3 running CM for recovery, and CyanogenMod 10 for the ROM (Updated with Odin from Jelly Bean).
The issue:
1) Whenever I press the power button the phone completely shuts off. It doesn't just go to the lock screen, it turns off.
2) The phone will not always turn back on.
3) 85% of the time when it doesn't turn on, it boots into the first splash screen and turns off.
4) When I try to put the phone into download or recovery mode the first screen will pop up for about two seconds and then the phone will turn off again. The phone will either shut down on the cancel/download screen for download mode or the first splash screen with the blue text at the top for recovery mode.
5) The other 15% of the time it will reach the CyanogenMod screen, freeze, then shut off.
6) When I put it on the charger, the stock charging icon pops up but then the phone stops charging and shuts off. (It will charge correctly some times)
These things don't just happen if I press the power button. I used a custom app to turn the phone off without the power button and the problems still occurred.
Things I've tried:
1) Replacing the battery.
2) Switching chargers.
3) Leaving the phone on the charger for a while.
4) Taking the battery out for extended amounts of time.
5) Just leaving the phone alone for a while.
No, the power button isn't stuck... I don't think it is
I am aware that the motherboard might need replaced. However, most of the cases I read about involved the phone not turning on/charging at all. If I could get the phone into recovery mode I would clear the cache and see if that worked, if not I would just factory reset the phone. If I could get into download mode, I would flash a stock firmware and be done with it.
This is my second android phone and I've never had this problem before. I did my experimenting with my old Motorola Droid so I could make sure I knew what was safe with my S3 but apparently there is something wrong.
I greatly appreciate any and all help and please do help me
[EDIT #1]
I began hitting the power button against a hard surface and 1 out of 7 times it works. Perhaps the button is stuck.
[EDIT #2]
I am now able to press the power button without the phone turning off. I will still make a back up and sync all of my important media and prepare to have to factory reset and flash a new ROM.
Hey guys,
I need some urgent help.
My Nexus 5 device is not booting. It stucks at the bootlogo then powers off and restarts again.
Normally it wouldnt be hard to fix such an issue but the problem is :
I can't boot into bootloader (bootloader appears for 1 second then phone powers off)
I can't boot into Recovery mode (Recoverymode appears for a second then phone powers off)
I can't get my phone into fastboot mode, - it appears for a few seconds durign the bootloop as an "unknown device", but I am not able to flash a new bootloader/factoryimage.
I tried like every possible option what I can do, but nothign worked for me.
What else can I try since I can' get my phone into fastbootmode?
Bootloader is unlocked
Secureboot is enabled
(from what i can see in these 2 seconds where the bootlaoder pop's up)
Is there a way to recover my nexus5?
Symptoms of broken starter button
Posté depuis Nexus 5 / Miui7 by Miui-France
Remove the motherboard and clean around the power button. When you have cleaned around the power button, quickly press and release the power button using more pressure than normal a few times, try to boot again.
Thanks for the tips!
I never thought that a broken Button could cause this issue.
I will check it as soon as I am home.
But how am I supposed to clean the motherboard, and I don't understand how cleaning the button from the outside
of the case should help to solve this problem.
Can you guys explain it a bit more detailed please? ^^
Are there good and very detailed tutorials for this?
And yes, you ideas definitely make sense because some days earlier when the Nexus5 was still
booting fine, I remember that I sometimes had the issue when I turned of the display with the power button
it instantly turned on again and I had to turn it off like 3-5 times until it really was off (standby).
To clean around the power button, you'll have to disassemble the phone which is not hard to do it you take your time and use the right tools.
https://www.ifixit.com/Teardown/Nexus+5+Teardown/19016
I noticed that the issue really was the powerbutton, - however the button was broken and
not repairable by cleaning. To repair the phone I would have to purchase a new motherboard.
In the end I decieded to purchase another phone, just saying that if someone will have the same issue in the future
try to clean first, if that wont help the powerbutton is most likely broken, and this results in a new motherboard-purchase because
the button is not repaireable by hand
The power is replaceable if the damage is confined to the power button itself.
Hey there,
my Nexus 5 (Android 6.0.1, Security Patch-Level: 2017/10/05) appears to be suffering from a stuck volume up button.
I have had a similar problem regarding the power button, which sent my Nexus 5 into endless bootloops. I was able to solve the power button problem by hitting the phone against the palm of my hand repeatedly.
In the case of the power button there doesn't seem to be an easy fix. Smacking it against my hand did not do the trick. The problem appears to occur randomly with the ringtone and/or media volume jumping to full blast from one second to the next.
In some cases I can lower the volume and it stays that way. Other times I can press and hold the volume down button and upon release it jumps right back to full volume.
I will try the following steps:
1) Diassemble the phone and clean the buttons
2) Flash the stock ROM to make sure, that it is not a software issue
I was wondering if you had any ideas/ additional steps, which I can take to fix the problem?
Thanks in advance!
Ron
Just got mine back from repair, got stuck in bootloop, only new microswitch helped.
I also suspected the ROM, but now it's fine again.
So I do recommend to change the microswitch, it's cheap...
Just be careful (or mention it to whoever will do it), it's being held in place not just with the solder but also somehow glued to the PCB. Don't force it too much. Take your time.
GL :good: