Related
Help.
I completely screwed up but do not know where.
Had problems rooting but eventually made it with 'Automatic-Root-Enabler--U8510--v1.1' which worked first time.
Then used rom manager to install HuaweiU8510.zip which did not work so tried U8500_Huaweid.zip.
cache and Delvic cleared, rebooted and red huawei came on screen and there it stayed.
Removed battery, boot into recovery went into firmware update(image in dload but cant remember name) starts step 1 unpacking get yellow triangle with ! and says update failed. also tried again with zip files on sd card but back to red Huawei
Any one got any ideas please as I can get to the sd card but not to the internal memory and not adb/fastboot. So no way of getting a new recovery image into dload
Keith
Here in the netherlands there are no huawei phones too bad because on the wmc they announced some pretty good phones ..
But on topic...
Does your phone still start normal?
If not try flashing it back to stock firmware..
Maybe it's a problem with the custom rom...
Sarvesh50 said:
Here in the netherlands there are no huawei phones too bad because on the wmc they announced some pretty good phones ..
But on topic...
Does your phone still start normal?
If not try flashing it back to stock firmware..
Maybe it's a problem with the custom rom...
Click to expand...
Click to collapse
Thanks
1. no
2. trying once I get original rom
3. Funny it is every one I tried
Keith
I do own a galaxy s...
Once i had a similar problem...
It was caused by the filesystem
Samsung uses the rfs system but custom roms prefer ext4 which is better...
When your filesystem isn't compatible with your custom rom than you will have a startup problem so try to figure out if you have to change the filesystem.
can't post links from other sites cause i am a newby to xda forums this is really annoying
Check this
http://forum.xda-developers.com/archive/index.php/t-1200195.html
Two days ago my Galaxy Note 10.1 gt-n8010 got stuck at the initial screen (Samsung Galaxy Note 10.1)
It was working normally, and it was last successfully upgraded to a custom rom and CWM 6.0.3.6 a month ago.
The custom rom was (to my best knowledge Android Revolution HD 11.2 - 4.1.2)
Booting into recovery and download modes works.
CWM recovery works partially. Erasing Cache en resetting to factory works, and sometimes results in getting to the second splash screen of the boot process where it again gets stuck (Samsung animation keeps glowing), but more it keeps getting stuck at he first boot screen.
Erasing Dalvic cache leads to immediate reboot.
CWM log files cant be opened / external sd card can't be reached/mounted.
So CWM is only working for a small part.
I've attached images of the CWM screens including a log-screen that shows that files and folders cannot be found.
Using ODIN, to flash a new CWM or custom/original ROM result in a FAIL message.
Tried different ODIN version, two original Samsung data cables and two computers. Alle the same result. FAIL.
I'm hesitant to continue now without some help. I might do more harm and destroy all chances there are to recover this tablet.
I've flashed all my phones and tablets before. I'm not an expert, but never had a mishap, because I triple read the instructions. The situation that arises now is not a result of a failed upgrade/flash, but suddenly appeared one morning.
On the last days i thought i had also broken my tablet and i had more or less the same problem. If i were you i would directly download an official 4.4.2 and flash it via odin. Then if you everything works i would try whatever you want to flash
Try changing recovery. Give TWRP a try. Had it happen with a phone and switching recoveries solved it.
Sent from my SM-N900T using XDA Free mobile app
Well I had the same problem due to toooo many consecutive reboots
I was on gnabo then wid twrp
then I reflashed 4.4.2 update via odin and everything was a breeze after that
and one more thing
be sure to change the recovery cause the same one might not work again
well at least it didn't do worth me
I use philz now
Can't flash anything
Tried everything I could find but nothing works. I'm using windows 7 and cannot flash anything using Odin.
Download mode and CWM recovery still boot.
Are there other ways to communicate and reprogram the galaxy note 10.1?
Deadbeef said:
Tried everything I could find but nothing works. I'm using windows 7 and cannot flash anything using Odin.
Download mode and CWM recovery still boot.
Are there other ways to communicate and reprogram the galaxy note 10.1?
Click to expand...
Click to collapse
are you sure you do not have a bad cable
I've used two different original Samsung cables. Same result.
Brick?
Change a Odin version like odin 3.07 http://forum.xda-developers.com/showthread.php?t=1837605?
your odin shows your device is Samsung I9505 Galaxy S4
Where does Odin show the device is a i9505? It's a n8010.
reCAPTCHA
I am having similar issues (Galaxy Note 10.1 N8010 Gnabo ROM) - stuck on the samsung logo (never managed to get past it though) boots into recovery but can't mount sd card OR internal storage. Can't flash anything using Odin, always gets a Complete(Write) operation failed. Any suggestions ?
Looks like we're both in the same sinking boat.
Sorry for late reply
Deadbeef said:
Where does Odin show the device is a i9505? It's a n8010.
Click to expand...
Click to collapse
Sorry for late reply
Your Odin Screen Shot Say i9505 as your device
Deadbeef said:
Looks like we're both in the same sinking boat.
Click to expand...
Click to collapse
I join u guys as well....
also was on gnabo rom and suddenly stuck on Samsung screen... however what's different from you is that I have a N8000 and Odin flashing shows "PASS". But whatever I flash doesn't boot... I think I need to open a thread about it.
georgesmh said:
I join u guys as well....
also was on gnabo rom and suddenly stuck on Samsung screen... however what's different from you is that I have a N8000 and Odin flashing shows "PASS". But whatever I flash doesn't boot... I think I need to open a thread about it.
Click to expand...
Click to collapse
Same here with Ganbo v7 since ysterday....
Just get stuck on Samsung logo and nothing works, even reverting to older backup image
Agyar said:
Same here with Ganbo v7 since ysterday....
Just get stuck on Samsung logo and nothing works, even reverting to older backup image
Click to expand...
Click to collapse
guys did any of you solve the problem??
georgesmh said:
guys did any of you solve the problem??
Click to expand...
Click to collapse
Nothing yet.... I've tried one old backup of v5 I've had and that won't boot now as well...
Really strange. I'm hoping to get it working somehow over the weekend latest, since I'll be on business trip next week and would like to have operating device on airplanes.
Agyar said:
Nothing yet.... I've tried one old backup of v5 I've had and that won't boot now as well...
Really strange. I'm hoping to get it working somehow over the weekend latest, since I'll be on business trip next week and would like to have operating device on airplanes.
Click to expand...
Click to collapse
maybe it's a problem from Gnabo ROM itself??? What's really sad is nobody on the threads knows how to help us
Uni starts next week!
georgesmh said:
maybe it's a problem from Gnabo ROM itself??? What's really sad is nobody on the threads knows how to help us
Uni starts next week!
Click to expand...
Click to collapse
I've seen few other occurrences of this on different roms on various forums, so probably not Gnabo issue. also, nobody nowhere had a fix for it
I had similar problem last November with a stock 4.4.2 ROM. Fortunately it was still in warranty (2 years in the UK) and Samsung took it in and replaced both battery and main board. They did not explain what was wrong, only that they were seeing quite a few with this issue. Could it be flash failure?
dmarchant said:
I had similar problem last November with a stock 4.4.2 ROM. Fortunately it was still in warranty (2 years in the UK) and Samsung took it in and replaced both battery and main board. They did not explain what was wrong, only that they were seeing quite a few with this issue. Could it be flash failure?
Click to expand...
Click to collapse
I don't think it was flash failure, at least not in my case, since device worked without any issue for quite a while after last flashing... what was different now is that my battery was drained out for the first time i quite a while...
Hello
I use a ROM with XT897 CM10.2.1 and SIM MOD CornholioGSM since July 2014, it was working fine.
I flashed the ROM-cm-SNAPSHOT-YOG4PAO23E 12.1-20150901-xt897 (RELEASE) one month ago and the ROM worked well. A week ago, the phone was much slower, I turn off reboot and since it constantly!
I made the following transactions with TWRP:
- Reset factory
- Flash ROM (cm 12.1-20150901-SNAPSHOT-YOG4PAO23E-xt897)
- Flash ROM (BlissPop-v4.0.1-xt897-OFFICIAL-20150917-1514)
- Flash recovery (cm 12.1-20150901-SNAPSHOT-YOG4PAO23E-xt897-recovery.img)
- Flash TWRP
- Flash ROM (cm 12.1-20151007-SNAPSHOT-YOG4PAO339-xt897)
Always the same, I have the boot logo and the logo of the ROM and the phone reboots.
The ROM (CM12.1) has started once and then restart the phone has rebooted repeatedly.
I tried with or without a SIM card.
I do not understand where does the problem, can you help me?
Well not having the phone in front of me, I don't really quite understand the issue myself - however, I would suggest using RSD Lite and one of the FXZ files to flash everything (including recovery) back to stock.
If you still have issues, there is a bigger problem (likely hardware failure).
Hello
sorry if my explanation was not clear.
I added a photo which shows the two steps in the operation of my phone.
Step 1: Start the phone .
Step 2 : boot ROM CM12
The Step 2 lasts 23 seconds then return to Step 1 and Step 2 and Step 1, Step 2 infinitely .
I hope this is understandable .
I read on the forum that used some RSD Lite but as I had not used for the ROM installation, I did not understand why use .
I'm a new user, i can't post picture, I send link by PM, thanks.
I thought my last post made it clear what purpose RSD Lite and the FXZ files are - they restore the phone to stock completely - ROM, recovery, everything will be reset to when it was stock from the factory (granted it may be a newer image than what shipped on the phone, but you get the point).
Again, as I stated previously, if you still have issues after flashing everything stock your issue is likely not software, but hardware.
I searched the forum about RSD Lite. Now I understand its usefulness.
I used RSD Lite to flash the ROM asanti_c_sprint-user-4.1.2-9.8.2Q-122_XT897_FFW-5-6-release-keys-cid9.xml.zip
My phone had with SPRINT .
The flash went well but unfortunately I still have the same problem :
Step 1: unlocked bootloader screen
Step 2: The red M MOTOROLA
Step 1, Step 2 , .....
Is there another test or I can consider it a hardware problem ?
Hardware problem can come out of the MODSIM ? I use a SIM card in the phone for 16 months.
Nicolas.636 said:
I searched the forum about RSD Lite. Now I understand its usefulness.
I used RSD Lite to flash the ROM asanti_c_sprint-user-4.1.2-9.8.2Q-122_XT897_FFW-5-6-release-keys-cid9.xml.zip
My phone had with SPRINT .
The flash went well but unfortunately I still have the same problem :
Step 1: unlocked bootloader screen
Step 2: The red M MOTOROLA
Step 1, Step 2 , .....
Is there another test or I can consider it a hardware problem ?
Hardware problem can come out of the MODSIM ? I use a SIM card in the phone for 16 months.
Click to expand...
Click to collapse
The hardware issue is likely not related to the SIM modification. As to what exactly has failed, I'm not sure... perhaps the NAND or something else memory related.
Aouch aouch...
Thank you for your help.
I think it remains for me to search for a motherboard for photon Q.
Long life in the forum!
Use "borrowed" TWRP recovery image.
Nicolas.636 said:
Hello
I use a ROM with XT897 CM10.2.1 and SIM MOD CornholioGSM since July 2014, it was working fine.
I flashed the ROM-cm-SNAPSHOT-YOG4PAO23E 12.1-20150901-xt897 (RELEASE) one month ago and the ROM worked well. A week ago, the phone was much slower, I turn off reboot and since it constantly!
I made the following transactions with TWRP:
- Reset factory
- Flash ROM (cm 12.1-20150901-SNAPSHOT-YOG4PAO23E-xt897)
- Flash ROM (BlissPop-v4.0.1-xt897-OFFICIAL-20150917-1514)
- Flash recovery (cm 12.1-20150901-SNAPSHOT-YOG4PAO23E-xt897-recovery.img)
- Flash TWRP
- Flash ROM (cm 12.1-20151007-SNAPSHOT-YOG4PAO339-xt897)
Always the same, I have the boot logo and the logo of the ROM and the phone reboots.
The ROM (CM12.1) has started once and then restart the phone has rebooted repeatedly.
I tried with or without a SIM card.
I do not understand where does the problem, can you help me?
Click to expand...
Click to collapse
I had a similar incident a few days ago. I have a hard time stopping myself from pushing the limits. Usually I stop when it's broken. I tried RSD Lite, SDB sideload/ flash, zip install from recovery, fastboot(mine's dead), all with no luck.
Any how, If you have CWM, temporarily change to TWRP. If you already have TWRP it's easier.
XDA has a TWRP recovery image in the forum. Put that in your sdcard (I had to paste it from my computer because my xt897 was soft bricked). Flash from TWRP.
Worked fom me. got my phone back after 1 week of flashing everything and then some.
Good luck.
http://forum.xda-developers.com/showthread.php?t=2295643
http://forum.xda-developers.com/showthread.php?t=2295643&page=2
Hello
thank you for this new information.
I tried it and it worked with the ROM [PQ_ICS-Stock] but only with that one!
I tried the ROM [PQ_JB-421] , several Cyanogen ROM but still the same looping boot problem.
I tried several version of TRWP without success .
I do not understand why my Photon Q only works with this ROM [PQ_ICS-Stock] .
Is still a motherboard problem ?
Hello everyone
I'm going crazy !
As I had not managed to solve my problem, I ordered a mainboard on ebay.
Today I realized the SIMMOD on this new board.
when I restarted phone the same startup problems with the ROM SPRINT !
I unlocked the bootloader .
I installed TWRP 2.7.1.2
I installed CM12.1-20151219 - NIGHTLY - XT897
Still the same problem starting loop.
Someone an idea ?
Nicolas.636 said:
Hello everyone
I'm going crazy !
As I had not managed to solve my problem, I ordered a mainboard on ebay.
Today I realized the SIMMOD on this new board.
when I restarted phone the same startup problems with the ROM SPRINT !
I unlocked the bootloader .
I installed TWRP 2.7.1.2
I installed CM12.1-20151219 - NIGHTLY - XT897
Still the same problem starting loop.
Someone an idea ?
Click to expand...
Click to collapse
If you can't RSD Lite, something is up. Either you are not doing the process correctly, or there is something wrong with the device (still).
Perhaps you were always on ICS and never made the official jump to JB? You say you can RSD Lite to an ICS version, just not a JB version? So 4.0.x works but 4.1.x does not?
Again I'm talking stock. If stock doesn't work, I wouldn't even attempt CM. Start with the basics, then work your way towards the aftermarket.
I agree that if the stock rom does not work after the installation with RSD Lite is that it remains something (software) .
The first motherboard I used 12.1 CM for several months it is that the phone supports android 5.1
I agree that it must abort running a stock ROM before flashing a ROM CM. But the ICS ROM STOCK works!
It is possible that I did not do the process correctly .
What surprises me is that the second board had the same problem with the ROM SPRINT !
I will do other tests.
Nicolas.636 said:
What surprises me is that the second board had the same problem with the ROM SPRINT !
Click to expand...
Click to collapse
This is the part that makes me think you are perhaps missing some step in the process somewhere.
Can you RSD Lite to ICS? Not flash it with TWRP. If that is successful, try to RSD Lite to the latest JB again.
I modified the second motherboard ( mod sim card ) and I started the phone with the ROM SPRINT and I got the boot problem repeatedly.
the common point of two motherboards is that they both have a bad ESN .
I will do other tests.
Nicolas.636 said:
I modified the second motherboard ( mod sim card ) and I started the phone with the ROM SPRINT and I got the boot problem repeatedly.
the common point of two motherboards is that they both have a bad ESN .
I will do other tests.
Click to expand...
Click to collapse
Bad ESN shouldn't prevent booting... it would prevent you from activating the device on the Sprint network, but I would imagine you don't care about that...
arrrghhh said:
it would prevent you from activating the device on the Sprint network, but I would imagine you don't care about that...
Click to expand...
Click to collapse
yes
I used RSD Lite 6.1.6 for flashing the ROM [ 2014-03-09 - TSv2 ] but the process has blocked after the flash.
Here is what I did :
1- run RSD Lite
2- Start the phone in FASTBOOT mode.
3- usb phone connection to PC
4- opening of the ROM [ 2014-03-09 - TSv2 ] and "uncompress and start flashing"
5- flash goes well
6- the phone reboots => Logo M red => telephone reboot => Logo M red => again ....
7- RSD Lite waits for the restart ... [ it waits again, LOL ]
8- I turned off the phone and I unplugged.
9- I turned on the phone who start properly, I arrived at the language selection screen .
The ROM is an android version 4.0.4 , I think you know this ROM .
Why the process with RSD Lite has blocked the phone to reboot ?
That's what I did wrong in the process?
I have read many forum post, I tried several methods but only in the ROM 4.0.4 STOCK work. Flashed with RSD lite or restoration of a backup with TWRP.
I have the bootloop problem using RSD Lite 6.2.4 for ROM 4.1.2 CSPIRE or ROM 4.1.2 SPRINT. No error message of RSD lite. No error message of phone.
I've modified the XML file but it changed nothing.
Same problem using TRWP with custom ROM or restoration of a backup ROM4.1.2 JB.
Same problem using OPEN RECOVERY 209 with custom ROM.
Where is the problem ?
I would use CM12 ROM.
Nicolas.636 said:
I have read many forum post, I tried several methods but only in the ROM 4.0.4 STOCK work. Flashed with RSD lite or restoration of a backup with TWRP.
I have the bootloop problem using RSD Lite 6.2.4 for ROM 4.1.2 CSPIRE or ROM 4.1.2 SPRINT. No error message of RSD lite. No error message of phone.
I've modified the XML file but it changed nothing.
Same problem using TRWP with custom ROM or restoration of a backup ROM4.1.2 JB.
Same problem using OPEN RECOVERY 209 with custom ROM.
Where is the problem ?
I would use CM12 ROM.
Click to expand...
Click to collapse
Without having the device in my hands, it's hard to say for sure. The only difference I can see you are doing differently from me is using a newer version of RSD. I doubt that would be an issue, but may want to try other RSD versions.
In the end, I suppose if 4.0.4 works, use that...
Thank you for you help.
I'll buy a other PHOTON Q on EBAY.
I do other test with the new PHOTON Q.
Hello
I received my new q photon.
It is version 4.1.2
I unlocked the bootloader .
I made a backup with TWRP and OPEN_RECOVERY_209 .
I tried an installation of 3 different ROM but I have an error message !
I do not understand where does the problem ?!
Is this a bad version of TWRP or ROM ?
I recently rooted my phone to try and recover some deleted pictures after the phone completely crashed and wouldn't load up , I have tried to install an original firmware using Odin but I keep getting the same message about not being authorized . Am I installing the wrong files or am I not doing something thathat causes it to fail?
Where did you download the firmware? Are you sure you're using the correct version?
Are you on a G930T or a G935T?
I had the same problem on mine before, what solved it was downloading a later version of the firmware, as you can't downgrade just like that.
You can download the latest firmware from Sammbile. (I would link but I have less than 10 posts.
The T stands for T-Mobile, and the 930 is the regular, 935 is the edge. If you're not T-Mobile, you're in the wrong section, but I'm still glad to help once I obtain more information.
http://forum.xda-developers.com/showthread.php?t=2798396
apowers98 said:
Where did you download the firmware? Are you sure you're using the correct version?
Are you on a G930T or a G935T?
I had the same problem on mine before, what solved it was downloading a later version of the firmware, as you can't downgrade just like that.
You can download the latest firmware from Sammbile. (I would link but I have less than 10 posts.
The T stands for T-Mobile, and the 930 is the regular, 935 is the edge. If you're not T-Mobile, you're in the wrong section, but I'm still glad to help once I obtain more information.
Click to expand...
Click to collapse
It worked ... thanks man , I thought the sammobile website was fake because of the processence to download but it worked perfectly
xxmessxx said:
It worked ... thanks man , I thought the sammobile website was fake because of the processence to download but it worked perfectly
Click to expand...
Click to collapse
hey man i have the same problem ,
i rooted my phone like week go and was crappy but expected and lived with it ,
today punch of apps were crashing and stopped working , reboted the phone got stuck in the T-mobile welcome screen ,
decided to go back tried to get the stock rom but no luck
exact same problem now the phone goes straight to recovery mode , i can do to download mode ,
my question here which software of sammobile used ?
the last recent one ??
any help will be appreciated
my phone is Galaxy S7 With T-mobile , 930T
makemesway2007 said:
hey man i have the same problem ,
i rooted my phone like week go and was crappy but expected and lived with it ,
today punch of apps were crashing and stopped working , reboted the phone got stuck in the T-mobile welcome screen ,
decided to go back tried to get the stock rom but no luck
exact same problem now the phone goes straight to recovery mode , i can do to download mode ,
my question here which software of sammobile used ?
the last recent one ??
any help will be appreciated
my phone is Galaxy S7 With T-mobile , 930T
Click to expand...
Click to collapse
Always flash the most recent firmware becasue if you don't remember chances are you can flash an old version and run into issues, so to be safe flash the latest available firmware. Also when you first rooted did you change the CPU governor or run/install anything that could have caused the bootloop in the first place?
KillerClaw321 said:
Always flash the most recent firmware becasue if you don't remember chances are you can flash an old version and run into issues, so to be safe flash the latest available firmware. Also when you first rooted did you change the CPU governor or run/install anything that could have caused the bootloop in the first place?
Click to expand...
Click to collapse
thanks all for the help i got my phone back from the dead.
it has now the most recent stock rom. gave me so much hard time but i got it back from the dead .
and i didn't do any thing to the governor or any thing the root was running for 10 days fine and yesterday was freezing and a lot of apps stopped working restarted the phone. was stuck in the boot loop
all good stable again under the stock rom.
waiting for a stable root method to get rid of all the crap we got of T-Mobile
makemesway2007 said:
thanks all for the help i got my phone back from the dead.
it has now the most recent stock rom. gave me so much hard time but i got it back from the dead .
and i didn't do any thing to the governor or any thing the root was running for 10 days fine and yesterday was freezing and a lot of apps stopped working restarted the phone. was stuck in the boot loop
all good stable again under the stock rom.
waiting for a stable root method to get rid of all the crap we got of T-Mobile
Click to expand...
Click to collapse
You can install this awesome rom to speed things up don't worry it's a stock rom so no Knox trip. The link I will provide also has instructions. So to get started I recommend making a backup of applications with titanium backup which might require the pro so unfortunately you may have to buy a full version( if you don't want to spend money you can patch the app with lucky patcher). And I recommend checking out this rom: http://forum.xda-developers.com/tmo...stockdeodexeddebloatedrom-7-10-t3415952/page1
It is somewhat debloated and has the best speed I've seen yet... Ive been using it for a month now and I love it!
Hi Guys,
Hopefully this is in the right section
I have a Note 4 SM-N910G and its just turned absolutely useless since I factory flashed it. I have rooted it before and bricked it and un bricked it before so have some experience with it. I recently wiped my phone and did a firmware restore using Samsung Kies and since I did the phone is absolutely useless. It started out fine for an hour or two and now it lags by like a minute with any action, even trying to bring up the keyboard when typing. It will reset itself, lock itself, crash, just un useable. I've tried reflashing it again stock a couple times and still the same everytime. It went from perfectly fine to dreadful with the original mentioned restore. I did just recently get an error code of "sbl1 partition doesn't exist" in Boot recovery mode.
Does anyone know if this is fixable and not a hardware issue?
Should I try and just root it again and flash a non-oem rom? (I havent had the time to do it recently)
many thanks,
Tekkado
Hi Guys,
Also I should add that when I was rooted the phone was fine but when i went to unroot through super user the phone was still functioning as though rooted and I couldnt download software updates because my device was "modified".
So thats when i just flashed stock firmware and again now flashing through odin aswell it proceeds fine then the device will say installing updates and then give a no command error or seandroid not enforced. Everytime is basically a different message.
How can I just wipe everything and get back to stock?
Thanks
So to add to this is there any relationship between the firmware running and the bootloader? I just realised that before i tried to flash stock firmware i was rooted and didnt un root via superuser because in the past that did jack all.
I flashed dr. ketan rom this morning and the phone was operating as normal very snappy but as soon as i downloaded a new app from the play store (reddit and chrome) again it turned to absolute crap.
Is there a disconnect here that i missing that can be fixed?
Thanks