i have recently bought an otg cable and it was working perfectly but when i placed the sd data of games on the pendrive....it didnt work so i wanted any soln for it!!!
MMX 110
abhijeetshankar1 said:
i have recently bought an otg cable and it was working perfectly but when i placed the sd data of games on the pendrive....it didnt work so i wanted any soln for it!!!
Click to expand...
Click to collapse
First Solution: Try another OTG ..The one you are using must be damaged.
Second Solution: If you are not using a stock ROM or If you have flashed a Custom ROM then you can't use OTG cable because most of the Custom ROM's doesn't support OTG!
Related
hi guys, im new here can u help me out w/ my imate jam.. i recently changed my ROM w/ xda mini ver 1.11, simply bec when i tried to flash a new rom to remove the arabic part, i messed up my imate jam, it wont boot and all i can see is a number in the LCD, one of my friends helped me and flashed a new rom, it now boots but no GSM, so another friend of mine helped me out, he installed a ROM of xda mini w/ radio, and so finally it now works, but my main concern is that i cannot detect my memory card, i tried 2 diff cards even lower capacity but still i cant detect, i went to file explorer - device - but i cannot see storage card... pls help me.. thanks...
The sIII has awesome USB otg support stock but on cm10 and aokp this doesn't seem to he the case.
All of the touchwiz based roms. (beans, cleanrom, and synergy)
Sent from my SCH-I535 using Tapatalk 2
Thanks! I wish aokp supported it but I will make do.
I tried almost every tw based rom including beans custom rom, synergy and cleanrom. None of them seemed to react to my on the go cable. The cable works fine in my friend's bone stock s III. Am I doing something wrong?
Confirmed working on CleanRom, but like the above said, I believe any stock-based/TW rom should work. I've used both an OTG usb cable and a micro-to-full usb adapter (which wasn't labeled as OTG) and both worked for me.
What are you trying to use it with? Some higher-drain devices may need a separate power source.
A 4gb flash drive and a wireless keyboard/mouse. Nothing that didn't work before root and rom flashing. Thanks for your help!
I finally got my original stock firmware back in and started over.
I rooted it and installed the CM11 for my Mediapad.
And it broke it's ability to see the flash drives.
I know the otg works because my external keyboard works perfectly.
I'm wondering if it's something with the filesystem because I noticed an app in the Rom called Externalstorageprovider.
Has anyone else had this problem?
Has anyone come across a way to fix it?
Anyone?
LunaEros said:
I finally got my original stock firmware back in and started over.
I rooted it and installed the CM11 for my Mediapad.
And it broke it's ability to see the flash drives.
I know the otg works because my external keyboard works perfectly.
I'm wondering if it's something with the filesystem because I noticed an app in the Rom called Externalstorageprovider.
Has anyone else had this problem?
Has anyone come across a way to fix it?
Click to expand...
Click to collapse
Well, i don't know exactly the problem. Why don't you try to search for custom kernel that supports OTG drives?
Sent from my SM-T311 using Tapatalk
There isn't a bunch of them for the Mediapad.
Plus it did work on an earlier version. Just that other things didn't work on that one.
I was hoping to get some ideas on what might be wrong here because I found posts where other had this problem too with there tablets.
Not just the Mediapad. Some of them were with CM11 and some were on some earlier versions on theirs.
I hope someone can give me some idea otherwise I guess I'll have to go back to the stock firmware.
ASK
is there anyone CyanogenMod for my GT-S6310 ?
I,m using Galaxy Y S5360. previous i flashed the custom rom, hyperion without backing up my IMEI number. i know it was very stupid of me, and for that i cant make calls. its a huge problem. So i thought of going back to the stock rom, flashing with odin. but then i realise that usb port of my phone is damaged. Its not reading the data cable connection as one instead it starts charging. its not because of any driver problem, coz ive tried all. its a hardware problem. So please can anyone help me to give an alternative way to flash stock rom via reccovery mode. PLEASE help needed. the thought of bricking my scares the hell out of me.
Installing through recovery mode just need to transfer stock rom to your xtrnl sd card thats why you have to use data cable
I bought an Atrix 2 off eBay a few days ago... the box says its ME865 but the About Phone page shows my phone as MB865. Its an AT&T unlocked phone with ICS.
since i have read that they both are a bit different on hardware level .. how do i know for sure if my Atrix 2 is ME or MB .. ?
also that ROMs that are listed in the Development section dont show whether they are for ME version or the MB version, So are they compatible with both ?
Mokx said:
I bought an Atrix 2 off eBay a few days ago... the box says its ME865 but the About Phone page shows my phone as MB865. Its an AT&T unlocked phone with ICS.
since i have read that they both are a bit different on hardware level .. how do i know for sure if my Atrix 2 is ME or MB .. ?
also that ROMs that are listed in the Development section dont show whether they are for ME version or the MB version, So are they compatible with both ?
Click to expand...
Click to collapse
If it's AT&T then it's MB865.
1BadWolf said:
If it's AT&T then it's MB865.
Click to expand...
Click to collapse
Ah cool, thank you ..
Also... which ROM is best suited to play HD games and doesn't have heat up problem ? ..
currently i am using the Stock ICS and the screen near the speaker tends to heat up quite fast..
Mokx said:
Ah cool, thank you ..
Also... which ROM is best suited to play HD games and doesn't have heat up problem ? ..
currently i am using the Stock ICS and the screen near the speaker tends to heat up quite fast..
Click to expand...
Click to collapse
Try Slimkat or CM11
Mindvisi0n said:
Try Slimkat or CM11
Click to expand...
Click to collapse
Flashed SlimKat on system 3 .. really liked it .. so i wanted to flash it on system 1 and use ONE rom .. well.. i have Soft Bricked my Phone :/
i know i have to use RSD lite to flash the stock ICS AT&T ROM .. this one..InlineFlashing_Edison_67.21.125_CFC_P3_APBP.xml.zip on the sbf.droid-developers website (cant post links)
but the downloading is SUPER slow and i cant find a mirror..
Is there any other way to fix my phone ? i did back up my System and CID can i use them to fix my phone ? if not can i PLZ get a mirror of the stock ICS Rom .. coz this one is taking way too much time.. (still need like 2 hours more to download)
EDIT ...Never mind, the ICS stock Rom downloaded (took around 3 hours) and i have successfully flashed SlimKat to System 1.
Slimkat with no doubt
Berryness said:
Slimkat with no doubt
Click to expand...
Click to collapse
Been using SlimKat but its battery life is bad... today it went frm 60% to 0% within 2 hours.. and the worst part is.. the phone was on StandBy.. plus my phone was quite hot like the whole thing was getting heat up.. but the whole time i was not even using it.. it was either in my pocket or in my hand.. always on Standby :/
i really liked SlimKat but today i am forced to download CM11
Edit: My PC wont recognize my Atrix 2 at all :/.. it keeps saying USB device not recognized... my phone keeps on charging as if its connected to a normal wall socket.
While charging i notices that it jumped frm 70% to 99% in 2 seconds.. and now it shows that my phone is fully charged :/
Reflash ROM, make sure battery stats are erased. Slimkat IMO has best battery life
atrix 2 cm11
jdog1989 said:
Reflash ROM, make sure battery stats are erased. Slimkat IMO has best battery life
atrix 2 cm11
Click to expand...
Click to collapse
Installed CM 11 for now.. seems to give better battery life compared to SlimKat..
i am still unable to connect my phone to pc.. even bought a new Data cable and it still shows as USB device not recognized.
Plz help
Reinstall USB drivers and/or try another USB port. USB debugging ticked. If all fails try another computer to eliminate probable issues
Sent from my MB865 using XDA Premium 4 mobile app
my Phone showed up for a second and windows tried to install driver.. but then it said that the device is unplugged..
also the when i get the USB device not recognized error, it only stays for a few seconds as if i have removed the device..
Same thing on my Sisters laptop.. i get the USB device not recognized error
just now my phone went into Media Mode for a few seconds and my pc started connecting it .. but it again went back to normal charging and PC said the device has be removed.
i tried to plug the wire in ever possible style .. trying pulling a bit to the sides but nothing seems to work .. it would connect randomly for a few seconds on plug in and get removed ..
Sounds like either your cable is bad or data port connection is loose
Sent from my MB865 using XDA Premium 4 mobile app
just tried with an old Nokia data cable .. and the phone showed up in windows Device manager as an unknown device... reinstalled drivers and now its working..
the strange part is.. its working on the new Motorola cable now as well ..
Hmm...
Sent from my MB865 using XDA Premium 4 mobile app