Database Info

Inspire 4G and the cyanogenmod (questions)

Im new to the android community and phones. I bought an Inspire with gingerbread (2.3.3) and would like to add cyanogenmod to it but the tutorials look so "harmfull" they scare me away so i have some question.
Can i downgrade from 2.3 to android v1?
Have anyone here rooted and flashed the same phone I have?
What is "radio? Can I change it to another one? how can I tell if it will work with my carrier?

please, please, please. READ
these questions you are asking concern me
1. you dont downgrade to v1....because it doesnt exist
2. we all have the same phone as you, otherwise we wouldnt have an inspire section
3. there is an entire thread dedicated to this very subject....look in the dev section.
there are easy to follow guides, tutorials, and walkthroughs here, but you have to READ...there is ZERO excuse for not reading and comprehending this stuff. if it is too much for you, you should NOT be doing any of it, and leave your phone stock

This is why I said..im NEW with this... none of what you helped in some way.

joandajer said:
This is why I said..im NEW with this... none of what you helped in some way.
Click to expand...
Click to collapse
then you have some READING to do. nobody here is going to hold your hand.
ALL the information you seek is already here, but you have to READ
Sorry if all you want is someone to hold your hand and spoonfeed information to you
NEW or not, it doesnt matter. I was NEW to this phone when i got it. I READ, the same way i have done with all my other phones. I READ to understand what i am doing and how to do it.
heres the first thing you should have read when you came to the inspire boards:
http://forum.xda-developers.com/showthread.php?t=1033353
its a sticky for a reason

Thanks for the link. Wil this tool The Ace Hack Kit work with 2.3.3 version? for rooting pourposes i mean?

joandajer said:
Thanks for the link. Wil this tool The Ace Hack Kit work with 2.3.3 version? for rooting pourposes i mean?
Click to expand...
Click to collapse
from the OP in the ACE Hack Kit thread:
Both stock Froyo and Gingerbread supported
Click to expand...
Click to collapse
this question has come up several times in the last month. yes it works just fine

Hi, i just rotted the unit and everything was fine
So i decided to use, cyanogenmod, it installed
now i can make calls but it does not connect to the data network portion.
Any ideas?
I noticed the radio baseband is slighly different than the original. could it be?

Sorry. was quick. i entered the APN settings and it is now connecting.. just Edge....before (stock rom) i had "H" (guessing is 3G). Now it only connects to E (edge i assume).
The weird thing is that before whenever i was in an area with only edge It would not allow me to browse but now I can.
any idea jedi master?

you can try a different radio. look at the radio thread in the dev section

Sorry to bother you so much. I was able to solve the radio issue. Now, since the market app wasn't included i followed the guide on how to install gapps but after doing so i can't get pass the boot screen "touch the android to begin".
I try to wipe and reflash but still does not let me do it. Any ideas?

did you touch the android to begin?

Yes, sir. But it will still restart.
i try to wipe data and restart the process but same thing happens.
Tried taping the four corners and an still happening.
Someone said the the gapps file might be corrupted.
Right now cyanogenmod is a pain. is there a way to install another room or the stock one through recovery?
Thanks for all your help!

joandajer said:
Yes, sir. But it will still restart.
i try to wipe data and restart the process but same thing happens.
Tried taping the four corners and an still happening.
Someone said the the gapps file might be corrupted.
Right now cyanogenmod is a pain. is there a way to install another room or the stock one through recovery?
Thanks for all your help!
Click to expand...
Click to collapse
you can install any rom you like in recovery.
boot into recovery
go to mounts and storage
mount usb storage
on your computer, copy the rom zip onto the phone
back,
install zip file from sdcard
browse to rom zip
confirm flash

Thank you. I am downloading RUU_Ace_Gingerbread_S_Cingular_US_2.47.502.7_Radio_12.56.60.25_26.10.04.03_M_release_200368_signed.exe.... is this the correct stock?
Does it have to be on ZIP? if so, where can i find stock roms?

joandajer said:
Thank you. I am downloading RUU_Ace_Gingerbread_S_Cingular_US_2.47.502.7_Radio_12.56.60.25_26.10.04.03_M_release_200368_signed.exe.... is this the correct stock?
Does it have to be on ZIP? if so, where can i find stock roms?
Click to expand...
Click to collapse
no. this will leave you an unrooted stock rom
why dont you browse the dev forum here and look at all the ROM offerings?

I think i will just go with the stock one and the do the same procedure (using the hack kit and just leave it stock rooted....
would that be ok?

joandajer said:
I think i will just go with the stock one and the do the same procedure (using the hack kit and just leave it stock rooted....
would that be ok?
Click to expand...
Click to collapse
No because you'll still have s-off just flash pirateghost's rom its similar to stock rooted and is always good
Sent from my Inspire 4G using XDA App

Nick281051 said:
No because you'll still have s-off just flash pirateghost's rom its similar to stock rooted and is always good
Sent from my Inspire 4G using XDA App
Click to expand...
Click to collapse
Gene Poole has a very nice stock sense 3.0 rom. its very stock. mine is slightly 'themed' with some added tweaks

Thanks I will try RUU and if that does not work will download the latest one he has: PD98IMG_Ace_Cingular_US_1.84.502.11_Radio_12.39a.60.19_26.06.06.30_M_release_184324_signed.zip

joandajer said:
Thanks I will try RUU and if that does not work will download the latest one he has: PD98IMG_Ace_Cingular_US_1.84.502.11_Radio_12.39a.60.19_26.06.06.30_M_release_184324_signed.zip
Click to expand...
Click to collapse
thats not the latest rom.
are you scared of the dev forums? lol
http://forum.xda-developers.com/forumdisplay.php?f=1018

Kyndig's Paranoid Android - SGS4G Q&A

Um..questions shall be asked herrr lol that's right herrr

Re:
For some reason my home button doesn't work with this... any clue why? I've reloaded it three times and it does the same thing. Also it keeps on popping up "Unfortunately, Android keyboard (AOSP) has stopped." Thanks
-JH

NVM, overlooked what wasn't working. Please delete.

Wifi not working
After flashing this ROM my Wifi stopped working.. I could not "ON" my Wifi in Setting. Kindly help.. ? :crying:

sudhakarpsp said:
After flashing this ROM my Wifi stopped working.. I could not "ON" my Wifi in Setting. Kindly help.. ? :crying:
Click to expand...
Click to collapse
Read the op as it'll key you know all jb rooms have a wifi and data issue and are not meant to be used as daily drivers
Sent from my SCH-I605 using xda premium

ParanoidAndroid has been jacking with their source which has had me going crazy for weeks. I'll keep y'all up to date as best I can.
Sent from a hole in the time/space continuum.

Update Rumor
I was finally able to get the source to download Monday and eventually got it to build yet it doesn't quite work yet since it's 4.2.1 :laugh: so this will probably need to be put on hold until the 4.2.1 kernel is closer to stable.

Thread Ownership Change
I am turning the ParanoidAndroid thread over to my teammate thomas.raines. He has the 4.1.2 source which is no longer available on GitHub. I appreciate everyone's patience with me in the lack of support I have been able to provide for this ROM. Thomas will do an excellent job.

Download
Is the download link in OP, because I cannot find it. Or is is just me? Thanks in advance.

In this OP or in the actual ROM development thead?

yeongjje said:
Is the download link in OP, because I cannot find it. Or is is just me? Thanks in advance.
Click to expand...
Click to collapse
Download link has been taken down because it was an unstable alpha build. Thomas is most likely working his butt off to fix this ROM. Please be patient until it gets fixed. In the mean time, check out the PACman ROM. It is a mashup of Paranoid, CM and AOKP.
Link to PACman: http://forum.xda-developers.com/showthread.php?t=2136833
Sent from my Xoom using xda app-developers app

Theraze said:
In this OP or in the actual ROM development thead?
Click to expand...
Click to collapse
In the ROM development thread. I couldn't find it there. Any clue?
Edit:
Nevermind I didn't see Cooptx's comment. I thought it was weird how there was not download link. Now it all makes sense. Thank you, guys.

anybody working on pa seems its dead ?

chacua358 said:
anybody working on pa seems its dead ?
Click to expand...
Click to collapse
When PA pulled the source code from their repository I was dead in the water. I haven't been in contact with anyone from TFQ in over a month so I'm not sure if Mr. Raines has made any progress.
Sent from a hole in the time/space continuum.

Is it possible to just port PA? I know the first answer to that would be for me to try myself, but I don't have access to a good 64 bit computer running Linux and I am not allowed to change our only 64 bit computer to Linux or even touch it considering that it is my dad's. I understand that PACman is a thing, because I have recommend it to others before, but I would like to have just plain PA. Just a thought with a nice long monologue about why I can't attempt it myself. That is unless someone would like to inform me that it is possible to port on a 32 but computer xD
Sent from my Xoom using xda app-developers app

Cooptx said:
Is it possible to just port PA? I know the first answer to that would be for me to try myself, but I don't have access to a good 64 bit computer running Linux and I am not allowed to change our only 64 bit computer to Linux or even touch it considering that it is my dad's. I understand that PACman is a thing, because I have recommend it to others before, but I would like to have just plain PA. Just a thought with a nice long monologue about why I can't attempt it myself. That is unless someone would like to inform me that it is possible to port on a 32 but computer xD
Sent from my Xoom using xda app-developers app
Click to expand...
Click to collapse
If you could touch your dad's PC you could at least install VMWare or Oracle Box and run it in a VM. lol.

xD there is a thought. Sadly I dont think that he would appreciate that
Sent from my Xoom using xda app-developers app

You dont need a pc to port well to have it boot lol I booted up an old miui on the sgs4g lol porting like smali hacking not source of course
Sent from my SCH-I545 using xda app-developers app

A noob with some questions :)

Hello!
I'm ajesushn, I come from ginger (Galaxy Ace S5830i) and in my opinion JB look like very complicated to flash (compared to ginger).
At first, I would want to know which is the difference between official unlock bootloader method (Sony and FreeXperia method) and flashtool method??
At second, I'm very excited due to cyanogenmod 10 is available for nanhu but I have been searching a especific changelog for nanhu or the buglist in the FreeXperis Project website but I have not found it. I search this because I saw a GSM bug in some website but I didn't see the solution or if this bug has been fix yet. So, is it CM10 100% working (GSM too)?
Thats all and thanks for your attention.
Regards from Spain!
ajesushn
Sent from my C1505 using xda app-developers app

I may answer your 2nd Q.
ajesushn said:
At second, I'm very excited due to cyanogenmod 10 is available for nanhu but I have been searching a especific changelog for nanhu or the buglist in the FreeXperis Project website but I have not found it. I search this because I saw a GSM bug in some website but I didn't see the solution or if this bug has been fix yet.
Click to expand...
Click to collapse
.
Try jjm34's CM10 rom if don't want any GSM bugs [link]
and for the kernel: use jjm34=single or hsr0=dual. just google it
ajesushn said:
So, is it CM10 100% working (GSM too)?
Click to expand...
Click to collapse
For me it's not a '100%', because video recording/playback doesn't work... and minor bugs may arise after some time...
hope this helpss.

ajesushn said:
Hello!
I'm ajesushn, I come from ginger (Galaxy Ace S5830i) and in my opinion JB look like very complicated to flash (compared to ginger).
At first, I would want to know which is the difference between official unlock bootloader method (Sony and FreeXperia method) and flashtool method??
At second, I'm very excited due to cyanogenmod 10 is available for nanhu but I have been searching a especific changelog for nanhu or the buglist in the FreeXperis Project website but I have not found it. I search this because I saw a GSM bug in some website but I didn't see the solution or if this bug has been fix yet. So, is it CM10 100% working (GSM too)?
Thats all and thanks for your attention.
Regards from Spain!
ajesushn
Sent from my C1505 using xda app-developers app
Click to expand...
Click to collapse
Hey!
I come from Gingerbread as well (Micromax Bolt A27, super cheap phone), and I think JB is actually easier to use/flash than GB. But keep your opinion, don't copy mine if you don't want to.
1. The difference... I honestly see none. I've unlocked and relocked, once unlocked with Sony, once with Flashtool. Either time, I saw no difference. They might even be the same thing, with Flashtool doing nothing but automating the process.
2. Don't use FXP. FXP, while good development, is incomplete. Instead, use this ROM: http://forum.xda-developers.com/showthread.php?t=2330638 (made by jjm34), and this kernel: https://docs.google.com/file/d/0B73-53ZX-WVRSGxDZFBjNURBdm8/edit (made by hsr0). This is the best CM10 you can get, the only bugs being:
a) Video recording doesn't work.
b) Compass/magnetometer doesn't work (nobody ever pointed this out, but it's true).
c) GSM randomly fails for some people.
d) In a couple of cases, Bluetooth had problems.
Note that it's a very, very low chance you'll get bugs c) and d), but I've got both, so I'm currently using stock.

NSDCars5 said:
a) Video recording doesn't work.
b) Compass/magnetometer doesn't work (nobody ever pointed this out, but it's true).
c) GSM randomly fails for some people.
d) In a couple of cases, Bluetooth had problems.
Note that it's a very, very low chance you'll get bugs c) and d), but I've got both, so I'm currently using stock.
Click to expand...
Click to collapse
Bug e)Sometimes charging randomly fails.
Yep. I'm back at bug d and e -.-
No CyanogenMod for me, until CM11. I'm getting real tired. This is the second time in 2 weeks. If I have to flash the same ROM every week, I might as well stay stock.
@OP: You can always try CM10, but my advice is to stay stock until CM11 arrives, hot off the press with development still being active!
Have a nice day

Thank you for your answer!
I think that I prefer waiting for a stable CM11 release. Cross finger!
A last question, please. What custom based-on-stock ROM do you recommend??
Regards
ajesushn
Sent from my C1505 using xda app-developers app

ajesushn said:
Thank you for your answer!
I think that I prefer waiting for a stable CM11 release. Cross finger!
A last question, please. What custom based-on-stock ROM do you recommend??
Regards
ajesushn
Sent from my C1505 using xda app-developers app
Click to expand...
Click to collapse
Hey!
My favorite stock based ROM for our little E after CM10 is Xboost. You can find it here: http://forum.xda-developers.com/showthread.php?t=2559312
Hope I helped, and have a nice day

Hi again!
I wonder what about Kitkat for nanhu?? Is it possible an official update or we have to wait for CM 11??
Thanks for yout attention.
Regards
ajesushn
Sent from my C1505 using xda app-developers app

ajesushn said:
Hi again!
I wonder what about Kitkat for nanhu?? Is it possible an official update or we have to wait for CM 11??
Thanks for yout attention.
Regards
ajesushn
Sent from my C1505 using xda app-developers app
Click to expand...
Click to collapse
Frankly speaking, if Sony wanted to update nanhu to KitKat, they'd have updated it to 4.2 and 4.3 too. But we're still at 4.1. Moral of the story: no, sorry. UltraGamerHD and hsr0 are working on CM11, but you'll have to wait a bit.

NSDCars5 said:
Hey!
1. The difference... I honestly see none. I've unlocked and relocked, once unlocked with Sony, once with Flashtool. Either time, I saw no difference. They might even be the same thing, with Flashtool doing nothing but automating the process.
Click to expand...
Click to collapse
Relock??! HOW??
Ok. Flashtool method looks like nice but, need this program another program to work (as android SDK, for example) ??
And why say Sony that unlock bootloader may cause malfunctions and problems in devices?? To scare??
Regards
ajesushn

ajesushn said:
Relock??! HOW??
Ok. Flashtool method looks like nice but, need this program another program to work (as android SDK, for example) ??
And why say Sony that unlock bootloader may cause malfunctions and problems in devices?? To scare??
Regards
ajesushn
Click to expand...
Click to collapse
Before unlocking, root your device, and backup the TA partition. Now unlock, and whenever you want to relock, simply reflash the TA partition.
I don't think the SDK or anything else is needed, as I never installed it. However, I do always keep Minimal ADB and Fastboot on my laptop (it's basically ADB and Fastboot without downloading the whole SDK).
This last line you said confuses me. Who said unlocking causes malfunctions? Sony? If it's Sony, they're warning you that with an unlocked bootloader, you're likely to flash new system images, different kernels, stuff like that. Doing all that has a chance that you'll brick your phone. Of course, it doesn't usually happen, but there's always a chance. To restore, you can usually flash the stock FTF file, so that's no big problem.

Hi!
At "Original Android Development" thread there is a Tapioca CM11 thread but, this say "device maintaner: (...) E -> hsr0" so , is it a nanhu CM11 thread too? Is it a common CM11 thread if the title say "Tapioca"? I'm confused
Regards
ajesushn
Sent from my C1505 using xda app-developers app

[Q&A] [ROM] [4.4.4] SlimKat (d2vzw) Stable 7.0

Q&A for [ROM] [4.4.4] SlimKat (d2vzw) Stable 7.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [4.4.4] SlimKat (d2vzw) Stable 7.0. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

like this rom
i like this rom only had a few problems but after a reboot seams to be working good again

I have the weirdest thing happening. I'm on stable 7 and have been for quite a while. It's worked perfectly until a couple days ago and now I can't send text messages out. I think I can receive OK. Just can't send out. I've even tried doing a clean install of this and other ROMs with same result. It gets more odd... After toying with it I can send only one text out. Just one to any person. But I can't send another unless I reboot or I think wait a few hours. Upon reboot I again can send only one text message out. And so on. I have no clue what could be happening. Any ideas?
Sent from my SCH-I535 using XDA Free mobile app

I had that problem when I was using certain builds. I had to drop modem back to BMB1. After that I could send with no issue. I, too could only send one text at a time.
msolaw said:
I have the weirdest thing happening. I'm on stable 7 and have been for quite a while. It's worked perfectly until a couple days ago and now I can't send text messages out. I think I can receive OK. Just can't send out. I've even tried doing a clean install of this and other ROMs with same result. It gets more odd... After toying with it I can send only one text out. Just one to any person. But I can't send another unless I reboot or I think wait a few hours. Upon reboot I again can send only one text message out. And so on. I have no clue what could be happening. Any ideas?
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse

Where can I turn off the swipe security on the 8.12 update?

markapowell said:
Where can I turn off the swipe security on the 8.12 update?
Click to expand...
Click to collapse
Lockscreen tweaks are in Settings/Interface/Lockscreen
Sent from my SCH-I535 using Tapatalk

What kernel and baseband is recommended to use with this Rom? I haven't used my s3 in awhile and just want to make sure I get it right... Right now I'm on cleanrom 4.5 which is 4.1.1 and on baseband vrblk3.. I did install the latest twrp already.. Thank you in advance and sorry if this was asked and answered already

myredfast said:
What kernel and baseband is recommended to use with this Rom? I haven't used my s3 in awhile and just want to make sure I get it right... Right now I'm on cleanrom 4.5 which is 4.1.1 and on baseband vrblk3.. I did install the latest twrp already.. Thank you in advance and sorry if this was asked and answered already
Click to expand...
Click to collapse
Stock kernel and VRBMF1 firmware is the bassline recommendation. TWRP 2.7 at least, newest TWRP 2.8 works fine as well.
Sent from my SCH-I535 using Tapatalk

SlimSnoopOS said:
Stock kernel and VRBMF1 firmware is the bassline recommendation. TWRP 2.7 at least, newest TWRP 2.8 works fine as well.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Thank you much[emoji2]

I was able to locate the firmware and had a tough time finding the stock kernel as many links for many things are no longer good... I downloaded what I thought was the "stock kernel v2" however when I try to flash after flashing the firmware in twrp I get a failed message "unable to open zip file".. Any thoughts, thank you in adv. Have twrp 2.8.0.1 btw and flashed MF1 firmware....

myredfast said:
I was able to locate the firmware and had a tough time finding the stock kernel as many links for many things are no longer good... I downloaded what I thought was the "stock kernel v2" however when I try to flash after flashing the firmware in twrp I get a failed message "unable to open zip file".. Any thoughts, thank you in adv. Have twrp 2.8.0.1 btw and flashed MF1 firmware....
Click to expand...
Click to collapse
Noooooo haha stock kernel as in the kernel built-in the rom. All you need to flash is SlimKat and gapps then boot.
Sent from my SCH-I535 using Tapatalk

SlimSnoopOS said:
Noooooo haha stock kernel as in the kernel built-in the rom. All you need to flash is SlimKat and gapps then boot.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Lol the last time I was flashing this phone I was doing them separate and I thought that it might be built Into the Rom. that's what I did and it's seems to be working other than one freeze up... All good, now that I feel like a complete noob, on with flashing my lg g3... Thanks a lot Snoop I apreesh!!

myredfast said:
Lol the last time I was flashing this phone I was doing them separate and I thought that it might be built Into the Rom. that's what I did and it's seems to be working other than one freeze up... All good, now that I feel like a complete noob, on with flashing my lg g3... Thanks a lot Snoop I apreesh!!
Click to expand...
Click to collapse
That's my bad on the ambiguity! Haha glad you've got it all set up. Just to clarify, every rom comes with a boot.img which is what becomes the kernel. Custom kernels are slightly different.
Sent from my SCH-I535 using Tapatalk

SlimSnoopOS said:
That's my bad on the ambiguity! Haha glad you've got it all set up. Just to clarify, every rom comes with a boot.img which is what becomes the kernel. Custom kernels are slightly different.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Hey no problem, it's all good.. I guess we all have "moments" lol. After looking back on it I was like "Damn I should have known that" haha... I just really appreciate all you and other devs do for the community [emoji106] ?!!! Phone is running champ doe!!! Thanks again! And thanks for clearing that up[emoji2]

GPS issue with latest nightly
Just an FYI, I tried the latest nightly and got zero GPS fix, even with a clean flash. I went back to the latest stable build (also a clean flash) and everything's cool with that, except for my inability to view pics within Gmail. :/

Portable Wi-Fi Hotspot
Hi, I just loaded up Slimkat 4.4.4 with the stock kernel on my Verizon Galaxy S3. I used to use the Wifi Tether TrevE Mod with my previous version and that worked, however, this does not appear to work in this rom. I noticed there was a built in Portable Wi-Fi hotspot, which does work perfectly. I would like to use this but am just concerned that somehow VZ would know I am tethering and I would incur additional charges. Do I have anything to worry about or am I just being paranoid?
Thank you for a GREAT product, it's a spectacular rom.

ooom416354 said:
Hi, I just loaded up Slimkat 4.4.4 with the stock kernel on my Verizon Galaxy S3. I used to use the Wifi Tether TrevE Mod with my previous version and that worked, however, this does not appear to work in this rom. I noticed there was a built in Portable Wi-Fi hotspot, which does work perfectly. I would like to use this but am just concerned that somehow VZ would know I am tethering and I would incur additional charges. Do I have anything to worry about or am I just being paranoid?
Thank you for a GREAT product, it's a spectacular rom.
Click to expand...
Click to collapse
Nope. Lot of us have used it for months with no issue whatsoever.
Sent from my SCH-I535 using Tapatalk

Google Play Services not Installed
Just did a dirty flash of 9 stable over 7 stable flashed the latest gapps, and now the Google play store does not work and a bunch of apps are requesting the install of Google Play Services.
Any tips?

wundbread said:
Just did a dirty flash of 9 stable over 7 stable flashed the latest gapps, and now the Google play store does not work and a bunch of apps are requesting the install of Google Play Services.
Any tips?
Click to expand...
Click to collapse
You could try clearing data for the Play Store. I always encourage a clean flash (wipe data and system) before each new release.
Sent from my SCH-I535 using Tapatalk

Any updates on that "further notice"?
Sent from my SM-T900 using XDA Free mobile app

Samsung S7 under charge restart itself !!!

Hi guys
Today i did rooting and flashing SuperKernel 1.4 to my device and when i turn it off to put under charge, it restarts itself with no reason !...
Anyone can help ???

seccakrown said:
Hi guys
Today i did rooting and flashing SuperKernel 1.4 to my device and when i turn it off to put under charge, it restarts itself with no reason !...
Anyone can help ???
Click to expand...
Click to collapse
Hi mate...
Back in the old days of S4 this problem was due to a incompatibility between bootloader / kernel .........maybe here is the same , you could try and flashback an stock kernel and see , also ask in the kernel thread maybe is a known problem

MAX 404 said:
Hi mate...
Back in the old days of S4 this problem was due to a incompatibility between bootloader / kernel .........maybe here is the same , you could try and flashback an stock kernel and see , also ask in the kernel thread maybe is a known problem
Click to expand...
Click to collapse
Hi and thank u for the reply
I just came back to stock and everything is normal now...i tried to ask over there but as junior member i cannot post yet
Sent from my herolte using XDA Labs

seccakrown said:
Hi and thank u for the reply
I just came back to stock and everything is normal now...i tried to ask over there but as junior member i cannot post yet
Sent from my herolte using XDA Labs
Click to expand...
Click to collapse
Hi
Most likely is a kernel issue...... i know is tough to be junior....

MAX 404 said:
Hi
Most likely is a kernel issue...... i know is tough to be junior....
Click to expand...
Click to collapse
It's been years i follow xda but i just join now...it's ok no problem
As soon as i can solve the issue...
I will try some other kernel...
Superkernel it's out of discussion...like SupermanRom...i don't get how they can write that it's stable...it's full of bugs...
Sent from my herolte using XDA Labs

seccakrown said:
It's been years i follow xda but i just join now...it's ok no problem
As soon as i can solve the issue...
I will try some other kernel...
Superkernel it's out of discussion...like SupermanRom...i don't get how they can write that it's stable...it's full of bugs...
Sent from my herolte using XDA Labs
Click to expand...
Click to collapse
First time I flashed a ROM was years ago and it kinda ruined my phone, it had bugs etc. Nowadays I see no reason to flash a ROM in a brand new phone that has no issues and costs 700€ unless you feel adventurous . I might flash a ROM later when it will stop receiving updates and there's a stable ROM.

Travis Bickle said:
First time I flashed a ROM was years ago and it kinda ruined my phone, it had bugs etc. Nowadays I see no reason to flash a ROM in a brand new phone that has no issues and costs 700â?¬ unless you feel adventurous . I might flash a ROM later when it will stop receiving updates and there's a stable ROM.
Click to expand...
Click to collapse
Actually i had no reason to do it except that i'm curious...and i know how to fix if i mess up something and to me it costed 500 btw
Sent from my herolte using XDA Labs