Related
http://d-h.st/EHM
install in cwm
reset apns
and dont forget to dial the lte number
All This Lte number stuff
B) Modem issues
So I installed the new UCLD2 modem and now I even get LTE on FULL Bars, it's great and works perfect, but here is how to do it right
MAKE SURE YOU HAVE ROM MANAGER FIRST
1) Download it from here http://cl.ly/FpCO, safe it on Ext. SD Card
2) Reboot to Recovery
3) Clear Cache
4) Advansed/Clear D. Cache
5) Flash the Modem
6) Reboot, it will take few minutes, LET IT SIT FOR 5 MIN, DONT DO ANYTHING!!!
7) Now go straight to ROM Manager, do not open any apps or anything.
Now it will most likely it something will freeze and you will get a stop working messege, but just be pacient and wait and keep clicking ok, while making your way to ROM Manager
8) Fix Permission in ROM Manager ( it will happen, even if some app or process freezes in the middle of it, just keep cliking ok for the error messege and let permissions finish.
9) Reboot to Recovery right after permissions is finished.
10) in Recovery go to Advanced/Fix Permission (it may take a minute)
11) Reboot System, it should be normal reboot, just let it sit for a minute
12) now go to dialer and press *#2263#
13) Choose LTE/LTE ALL/click on whatever the number is
14) go back to dialer nd press *#2263# again
15) Choose 1 Auto/Auto/1
give it 10 sec, and ther you go perfectly working modem!
seanzscreams said:
http://d-h.st/EHM
install in cwm
reset apns
and dont forget to dial the lte number
Click to expand...
Click to collapse
Works fine here. Won't know if its better till tomorrow when I'm out and about. I have a micro cell in my house.
Just gonna stick with your current ics base until you switch to the new one.
Sweet, going to try it on my i717
crap, froze up phone:banghead:
Sent from my SAMSUNG-SGH-I717 using XDA
seanzscreams said:
http://d-h.st/EHM
install in cwm
reset apns
and dont forget to dial the lte number
Click to expand...
Click to collapse
what do you mean by dial the lte number?
rabbivj said:
what do you mean by dial the lte number?
Click to expand...
Click to collapse
+1
Sent from my SGH-I727R using Tapatalk 2
replied in op
When I dial *#2263# I get a message that "RAT selection option is restricted". I had to pull my SIM card then reboot so this option would work.
How does thia work? You pull sim card, reboot without sim , enter *#2263# and make change and the reboot with sim???
minderbinder106 said:
When I dial *#2263# I get a message that :RAT selection option is restricted". I had to pull my SIM card then reboot so this option would work.
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I727 using XDA
thats what i did and it seemed to work at least it allowed me to make a selection
seanzscreams said:
http://d-h.st/EHM
install in cwm
reset apns
and dont forget to dial the lte number
All This Lte number stuff
B) Modem issues
So I installed the new UCLC5 modem and now I even get LTE on FULL Bars, it's great and works perfect, but here is how to do it right
MAKE SURE YOU HAVE ROM MANAGER FIRST
1) Download it from here http://cl.ly/FpCO, safe it on Ext. SD Card
2) Reboot to Recovery
3) Clear Cache
4) Advansed/Clear D. Cache
5) Flash the Modem
6) Reboot, it will take few minutes, LET IT SIT FOR 5 MIN, DONT DO ANYTHING!!!
7) Now go straight to ROM Manager, do not open any apps or anything.
Now it will most likely it something will freeze and you will get a stop working messege, but just be pacient and wait and keep clicking ok, while making your way to ROM Manager
8) Fix Permission in ROM Manager ( it will happen, even if some app or process freezes in the middle of it, just keep cliking ok for the error messege and let permissions finish.
9) Reboot to Recovery right after permissions is finished.
10) in Recovery go to Advanced/Fix Permission (it may take a minute)
11) Reboot System, it should be normal reboot, just let it sit for a minute
12) now go to dialer and press *#2263#
13) Choose LTE/LTE ALL/click on whatever the number is
14) go back to dialer nd press *#2263# again
15) Choose 1 Auto/Auto/1
give it 10 sec, and ther you go perfectly working modem!
Click to expand...
Click to collapse
Sean
How many megabytes per second are you getting with full LTE bars?
Sent from my SAMSUNG-SGH-I727 using xda premium
smully1 said:
How does thia work? You pull sim card, reboot without sim , enter *#2263# and make change and the reboot with sim???
Sent from my SAMSUNG-SGH-I727 using XDA
Click to expand...
Click to collapse
Yes, that's what I did. Does anyone know if there is a way to check if the settings are kept after rebooting?
I get LTE 1 mile from my house so the next time I'm out I'll check to see if LTE works.
I got 2-3 less bars with this Modem.
I went back to UCALC4 and got my bars back.
Using a Rogers SGH-i727 device
When reporting of the signal strength of this modem, please refrain from using bars. The about section phone has an accurate measure in DB, please report is your new average is better or worse with this modem, and use speed tests to confirm.
icenight89 said:
When reporting of the signal strength of this modem, please refrain from using bars. The about section phone has an accurate measure in DB, please report is your new average is better or worse with this modem, and use speed tests to confirm.
Click to expand...
Click to collapse
:thumbup:
Sent from my SGH-I727R using Tapatalk 2
OK so could barely speedest in my location with the UCLD2 so had to give that up. Went with UCALC5 from the G-Note and actually got damn good results.
2.83mbps down
1.56 mbps up
117ms ping
No LTE in my area: unfortunately :banghead:
Sent from my SAMSUNG-SGH-I727 using xda premium
i always get "connection problem or invalid MMI code". is there any way around that?
I cleared caches . Installed modem and rebooted. Lte came on with out me fix perms or dialing the numbers.. no complaint here.
Sent from my SAMSUNG-SGH-I727 using XDA
This afternoon on LTE I got 41Mb/s down, 14Mb/s up outside and 28Mb/s down, 6Mb/s up inside Costco.
HSPA seems spotty. Sometimes I'll get 1Mb/s down and 100Kb/s up which is similar to what I was getting with UCAL4 and 2 minutes later I'll get 7Mb/s down, 1Mb/s up in the same area. It's still frustrating but definitely better than UCAL4.
I can't get auto time zone to work. When I check it it goes to gmt every time. Anyone know how to solve this? I made a couple calls and it still wont change.
Sent from low Earth orbit with my SkyRocket.
This one seems to be the best one out of all the ones I've tried.. I'm going out soon so I'll report actual findings later
Sent from my SAMSUNG-SGH-I727 using XDA
I did a full wipe and flashed the CM10.1 nightly released for the d2vzw this morning. When it rebooted I had no cell service. Looking in settings i have the proper IMEI number but my cell number is listed as 000-000-1361, MIN is 1361, PRL is 1. what can I do to fix it? I tried restoring a nandroid but the result is the same. Any help would be greatly appreciated!
RESOLVED
james3kral said:
I did a full wipe and flashed the CM10.1 nightly released for the d2vzw this morning. When it rebooted I had no cell service. Looking in settings i have the proper IMEI number but my cell number is listed as 000-000-1361, MIN is 1361, PRL is 1. what can I do to fix it? I tried restoring a nandroid but the result is the same. Any help would be greatly appreciated!
Click to expand...
Click to collapse
Okay so i believe this was my fault for flashing the latest cm 10.1 nightly with my build.prop edited to galaxy nexus values to allow google wallet functionality. removing sim card, starting phone, shutting down phone, inserting sim card, and starting phone fixed the problem
james3kral said:
Okay so i believe this was my fault for flashing the latest cm 10.1 nightly with my build.prop edited to galaxy nexus values to allow google wallet functionality. removing sim card, starting phone, shutting down phone, inserting sim card, and starting phone fixed the problem
Click to expand...
Click to collapse
I ran into the same problem but after trying you fix I still have no service. ?????
TheBurgh said:
I ran into the same problem but after trying you fix I still have no service. ?????
Click to expand...
Click to collapse
I am having the same problem. The phone wont still activate. Please help!!
james3kral said:
Okay so i believe this was my fault for flashing the latest cm 10.1 nightly with my build.prop edited to galaxy nexus values to allow google wallet functionality. removing sim card, starting phone, shutting down phone, inserting sim card, and starting phone fixed the problem
Click to expand...
Click to collapse
Any one try Odin back to stock?
I have a similar issue and I have been going around and around with it without any luck. I restored my latest backup and I still have 000-000-3257 with a PRL of 1. I will try the ops recommendation and will report back.
Odin to stock is my next move unless someone else can think of something else to try.
Try clearing dalvik cache in recovery. Fixed it for me on AOKP. Had the exact same thing where my phone number was a bunch of zeroes. Still had service though when I hit the home button to bypass the activation screen.
Sent from my SCH-I535 using Tapatalk 2
I tried to remove the sim, and boot, and readd the sim and boot but no go. I will try it again but then I think I am going back to stock to see if that works.
Everything still works fine. No need to get worried......it just doesn't report your phone number accurately. Its not like it actually effects functionality. I ran it with an f'ed phone number for 3 days. Everything ran fine. Don't sweat it. If its a problem, wait until tomorrows official nightly comes out tonight and you'll be set.
TechSavvy2 said:
Everything still works fine. No need to get worried......it just doesn't report your phone number accurately. Its not like it actually effects functionality. I ran it with an f'ed phone number for 3 days. Everything ran fine. Don't sweat it. If its a problem, wait until tomorrows official nightly comes out tonight and you'll be set.
Click to expand...
Click to collapse
My issue is it is affecting my functionality. My phone is not working and whenever I call out I get a generic message saying my phone is not active.
I restored a backup from when I first rooted. Now my phone number is listed properly and when I get into a 4G coverage area I can get data, but I still can't call out and it shows I am roaming when I am in a 3G area.
OP on CM10.1 says that dirty flashing Unofficial 10.1 build 12/17/12 will restore data. Any luck with this fix?
Sent from my SCH-I535 using xda app-developers app
dknell said:
OP on CM10.1 says that dirty flashing Unofficial 10.1 build 12/17/12 will restore data. Any luck with this fix?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
you can try that or mastamoons both have been reported to work
mastamoon said:
Here is my unofficial 10.1 build as of 3:00pm EST.
Has working data and increased MMS picture size mod. Otherwise is stock CM10.1
http://bit.ly/12yrtcw
Click to expand...
Click to collapse
Droosh said:
Thanks for sharing! I did a full data wipe and installed this and it activated right away.
Click to expand...
Click to collapse
I was very unlucky and the dirty flash didnt work for me. However, I did have a backup of my IMEI and was able to flash it back to my phone.
I ran into the same problem after flashing 10.1... lost IMEI and stuck on roaming, had no backup.
To fix it i did the following
1) Odin back to stock
2) use this tool http://forum.xda-developers.com/showthread.php?t=1867442
3) reprovish the phone using this code in the dialer *2767*3855#
IMEI restored and no longer on roaming
brandao.gabe said:
I ran into the same problem after flashing 10.1... lost IMEI and stuck on roaming, had no backup.
To fix it i did the following
1) Odin back to stock
2) use this tool http://forum.xda-developers.com/showthread.php?t=1867442
3) reprovish the phone using this code in the dialer *2767*3855#
IMEI restored and no longer on roaming
Click to expand...
Click to collapse
THANK YOU!. I could not get the IMEI/ERI tool to work, but I did get *2767*3855# code to work. I had to roll back to a older version of the official rom (I think rolling back the radio would have been OK) but I am not up and working.
fowen said:
THANK YOU!. I could not get the IMEI/ERI tool to work, but I did get *2767*3855# code to work. I had to roll back to a older version of the official rom (I think rolling back the radio would have been OK) but I am not up and working.
Click to expand...
Click to collapse
I flashed back to stock as well and then used the same number to reprovision. After that everything worked fine it fixed the roaming, incorrect number, PRL, and all. I never lost my IMEI so I didnt do that step. but if you flash back to the cm 10.1 before they fix the data it will happen again :laugh:
Please read forum rules before posting
Questions go in Q&A
Thread moved
Just change CDMA subscription to ruim/sim and toggle airplane mode...
I've never found a reason to have to Odin to anything.
Sent from my SCH-I535 using xda app-developers app
ajrty33 said:
Just change CDMA subscription to ruim/sim and toggle airplane mode...
I've never found a reason to have to Odin to anything.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I can't remember for sure, but I think that is something that the VZW tech had me do, and it didn't work. Maybe someone else who is having the issue can test and comment.
ajrty33 said:
Just change CDMA subscription to ruim/sim and toggle airplane mode...
I've never found a reason to have to Odin to anything.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
This fixed it for me! Thank you very much!
Sent from an unlocked Galaxy S 3! Screw you Verizon!
So...I went ahead and flashed the Dec 24th official 10.1 release with data working. I flashed with TWRP and it went smoothly. I couldn't activate the phone because it was stuck in roaming. I tried what ever I could do but could not get out of it. So I resorted back to full stock from verizon locking and un-rooting. Did that and I also flashed a stock radio. Still cannot get out of roaming mode.
Any suggestions? Kind of in desperate need of data to get a working phone!
Thanks in advance. I'm sure this problem has come up among many of you.
996 said:
So...I went ahead and flashed the Dec 24th official 10.1 release with data working. I flashed with TWRP and it went smoothly. I couldn't activate the phone because it was stuck in roaming. I tried what ever I could do but could not get out of it. So I resorted back to full stock from verizon locking and un-rooting. Did that and I also flashed a stock radio. Still cannot get out of roaming mode.
Any suggestions? Kind of in desperate need of data to get a working phone!
Thanks in advance. I'm sure this problem has come up among many of you.
Click to expand...
Click to collapse
Yes. It's come up many, many times.
Flash the latest cm 10.1 and fix the mobile settings.
Sent from my SCH-I535 using xda app-developers app
ajrty33 said:
Yes. It's come up many, many times.
Flash the latest cm 10.1 and fix the mobile settings.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I thought flashing "[OFFICIAL]CM10.1 Official Nightlies for D2VZW GSIII (12/24 Official Data Works)" was the latest one. How would I go about "fixing" the mobile settings? via the settings menu? I cannot access that menu if I need to go there. I need to get past the activation screen. Also I am not so sure on performing the four corners trick in order to get past that screen.
thanks
996 said:
I thought flashing "[OFFICIAL]CM10.1 Official Nightlies for D2VZW GSIII (12/24 Official Data Works)" was the latest one. How would I go about "fixing" the mobile settings? via the settings menu? I cannot access that menu if I need to go there. I need to get past the activation screen. Also I am not so sure on performing the four corners trick in order to get past that screen.
thanks
Click to expand...
Click to collapse
odin back to VRALG1 and then reprovision with dialer code *2767*3855#
droidstyle said:
odin back to VRALG1 and then reprovision with dialer code *2767*3855#
Click to expand...
Click to collapse
Gotcha. Did it and it seems to be fine now. Many thanks! Now I am hesitating going back to 10.1. I think i'll just stick to CM10 for now. until such time everything gets fixed.
droidstyle said:
odin back to VRALG1 and then reprovision with dialer code *2767*3855#
Click to expand...
Click to collapse
Can you elaborate on this?
996 said:
So...I went ahead and flashed the Dec 24th official 10.1 release with data working. I flashed with TWRP and it went smoothly. I couldn't activate the phone because it was stuck in roaming. I tried what ever I could do but could not get out of it. So I resorted back to full stock from verizon locking and un-rooting. Did that and I also flashed a stock radio. Still cannot get out of roaming mode.
Any suggestions? Kind of in desperate need of data to get a working phone!
Thanks in advance. I'm sure this problem has come up among many of you.
Click to expand...
Click to collapse
i just posted a fix topic for this but here this is how i got mine to work after flashing CM10.1 the 12/24
If you remove ur sim card and boot up and connect via wifi, u can then register and set up the phone. then shut down put sim card back in and boot up. go to system settings -> More... under wireless and networks -> mobile networks -> CDMA subscription and choose RUIM/SIM (NOT NV)
rossida said:
i just posted a fix topic for this but here this is how i got mine to work after flashing CM10.1 the 12/24
If you remove ur sim card and boot up and connect via wifi, u can then register and set up the phone. then shut down put sim card back in and boot up. go to system settings -> More... under wireless and networks -> mobile networks -> CDMA subscription and choose RUIM/SIM (NOT NV)
Click to expand...
Click to collapse
hmm sounds like it might work for me! but do you get full 4G? and good radio coverage like the touchwiz roms?
996 said:
hmm sounds like it might work for me! but do you get full 4G? and good radio coverage like the touchwiz roms?
Click to expand...
Click to collapse
i couldnt tell u sadly... where i am now i dont get 4g. 3g works fine. only had it flashed for 2 hours and been messing around with it. a couple of phone calls and text messages and doesnt seem like its dropping signal at all. but the solution i posted works just fine. if u dont want to try it just wait for the next release...
996 said:
Gotcha. Did it and it seems to be fine now. Many thanks! Now I am hesitating going back to 10.1. I think i'll just stick to CM10 for now. until such time everything gets fixed.
Click to expand...
Click to collapse
Flash cm10.1 again but this time go into settings/networks/cdma subs and select ruim/sim. Reboot
Sent from my SCH-I535 using xda app-developers app
Laramie1997 said:
Can you elaborate on this?
Click to expand...
Click to collapse
I didnt see a responce from here but ill do my best, flash back to the stock ROM using ODIN and you should be put back into the operating system still in roaming mode then you dial *2767*3855# as soon as you hit the # your phone will download a file and re-provision itself which will fix the roaming error.
So I installed bmm without issue, made my back ups and started trying roms. I had a hell of a time getting anything to boot. I would get stuck on the boot animation every time. Finally got slim kat installed and that is the only one I can reliably boot into. Tried aokp 4.3 which booted the first time but gets stuck on the animation now.
Also, when aokp worked I had no mobile data. Same problem currently with slim kat.
Where do I go from here? I've tried clearing cache and davlik on both with no luck.
Sent from my MB865 using xda app-developers app
You have to add APNs manually
Sent from my MB865 using Tapatalk 2
devilhunter47 said:
You have to add APNs manually
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
Thanks, Wasn't aware of that. I copied my APNs from my stock ROM. I get data now, just not 4g for some reason. I'm looking around to figure that one out.
nbucko said:
Thanks, Wasn't aware of that. I copied my APNs from my stock ROM. I get data now, just not 4g for some reason. I'm looking around to figure that one out.
Click to expand...
Click to collapse
Untick use 2g only option n initiate a new network search
Sent from my MB865 using Tapatalk 2
devilhunter47 said:
Untick use 2g only option n initiate a new network search
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
I only have the options of 3g and 2g with 3g already being selected. I don't know whats going on. My stock ROM gets 4g with those APN's, re-entered everything to make sure I didn't miss anything but I still don't have 4g as an option.
nbucko said:
I only have the options of 3g and 2g with 3g already being selected. I don't know whats going on. My stock ROM gets 4g with those APN's, re-entered everything to make sure I didn't miss anything but I still don't have 4g as an option.
Click to expand...
Click to collapse
Type *#*#4636#*#*
Then select ''wcdma only''
Sent from my MB865 using Tapatalk 2
Well wcdma only didn't do anything. After messing with Slimkat and another 4.4 ROM (which only worked until I rebooted) I've decided that there are just too many bugs for me to use it daily. I decided to try a 4.3 ROM but I'm still having issues getting one to boot after the first reboot. I've let it sit on the boot animation for 45 minutes and it never loaded.
I haven't found a lot of advice on the subject of ROMs only booting once. Does anyone have any suggestions?
nbucko said:
Thanks, Wasn't aware of that. I copied my APNs from my stock ROM. I get data now, just not 4g for some reason. I'm looking around to figure that one out.
Click to expand...
Click to collapse
I realize this is an old one, but I thought it might be worth mentioning...
I had the same problem. When I copied APN data (specifically "apn type") from my stock ROM data did enable, but at a very slow speed. A quick search yielded this AT&T site which suggested different settings. I was able to choose the "ATT Phone" config and modify "apn type" from "default,supl,mms" to "default,mms,supl,hipri".
When I modified that value, data was much faster, but still only clocked 3.5 Mbps on my CM ROM vs 5.1 on Stock with SpeedTest.net app. I believe it used different servers and I only did a single AB test.
...and by the way - I am also a bit frustrated with the BMM setup. It seems like a third of the time I am unable to successfully boot back into my CM ROM. It always seems to boot into Stock ROM fine. I do have CM in the second slot which it sounds like some folks prefer to not use.
hello all,
I am looking for help, i have a verizon s3 and flashed cyanogen 10.2 and sim was recognized but no network, i flashed 11 and 12.1 and now am on pac man rom all have had no sim and in sim status under settings it says not available under each option. somehow I can get text messages and calls and make calls and text but have no internet. imei numbers are there. does anyone know how to fix this?
chefalchelmy said:
hello all,
I am looking for help, i have a verizon s3 and flashed cyanogen 10.2 and sim was recognized but no network, i flashed 11 and 12.1 and now am on pac man rom all have had no sim and in sim status under settings it says not available under each option. somehow I can get text messages and calls and make calls and text but have no internet. imei numbers are there. does anyone know how to fix this?
Click to expand...
Click to collapse
Have you checked to see if the APN is set correctly.
dawgdoc said:
Have you checked to see if the APN is set correctly.
Click to expand...
Click to collapse
I was thinking the same exact thing, good point
Sent from my Nexus 5
I have tried multiple straight talk apn settings. when i go to the apn settings page i get a white screen that says "access point name settings are not available for this user" i can add in the settings but they dont stick or save when i press save it goes back to the white screen under apn and says the same. ive pressed saved and rebooted multiple times.
chefalchelmy said:
I have tried multiple straight talk apn settings. when i go to the apn settings page i get a white screen that says "access point name settings are not available for this user" i can add in the settings but they dont stick or save when i press save it goes back to the white screen under apn and says the same. ive pressed saved and rebooted multiple times.
Click to expand...
Click to collapse
Did you first remove all apns? Then add the straight talk apn?
Sent from my Nexus 5
ShapesBlue said:
Did you first remove all apns? Then add the straight talk apn?
Sent from my Nexus 5
Click to expand...
Click to collapse
There was no apns to begin with.
chefalchelmy said:
There was no apns to begin with.
Click to expand...
Click to collapse
Then you won't be able to use the rom. You need to be able to edit the APN settings in order to use it on straighttalk. Being a former VZW and then a straight talk user the apns are required
Sent from my Nexus 5
I bought my i535 used and it was already on NE1. Thus, I have not made any changes to modem and bootloader. I tell you this to let you know that I have not read about what bootloader/modem options those with the unlocked i535 have open.
That was to lead into asking if there is an updated modem available that will not entail getting to the locked bootloader that I am on. The reason I ask is that for the i747, the AT&T SGS3, a fix to your issue is updating the modem. I have seen more than one reference to this solution.
dawgdoc said:
I bought my i535 used and it was already on NE1. Thus, I have not made any changes to modem and bootloader. I tell you this to let you know that I have not read about what bootloader/modem options those with the unlocked i535 have open.
That was to lead into asking if there is an updated modem available that will not entail getting to the locked bootloader that I am on. The reason I ask is that for the i747, the AT&T SGS3, a fix to your issue is updating the modem. I have seen more than one reference to this solution.
Click to expand...
Click to collapse
True but the apns should still be available regardless of what modem they are on
Sent from my Nexus 5
ShapesBlue said:
True but the apns should still be available regardless of what modem they are on
Sent from my Nexus 5
Click to expand...
Click to collapse
I agree.
Would clearing cache dalvik-cache be a possible solution?
dawgdoc said:
I agree.
Would clearing cache dalvik-cache be a possible solution?
Click to expand...
Click to collapse
Its a possibility. Wouldn't hurt but I'm not sure that it would help. It's worth trying
Sent from my Nexus 5
Check if your IMEI does still have numbers. If not then thats why you cant get a connection
Sent from my SCH-I535 using XDA Free mobile app
dawgdoc said:
I agree.
Would clearing cache dalvik-cache be a possible solution?
Click to expand...
Click to collapse
I am currently having EXACTLY the same issue only I am on 5.1.1 AICP 10.0 NIGHTLY and clearing cashe dalvik-cashe does not change anything except maybe T-Mobile actually shows in the upper left of the screen