Hello,
After rooting and updating my I9003 to CM10.2-GalaxySL-JSS15Q-Alpha1 my phone will not charging (not charging usb too)
I want downgrade GingerBread 2.3.4 or something else because of solve for this problem. But pc and Odin cannot see my phone. How could i do downgrade without Odin.
Or any other solution. :crying:
P.S - Sorry for my bad english.
Please clean flash ddlf2 and than cm10.2 again. No worries. Unexpected things are expected in flashing. Good luck.
Sent from my GT-I9003 using xda app-developers app
I already install again but nothing change. i cleaned wipe cache and partition too.
sam_777 said:
Please clean flash ddlf2 and than cm10.2 again. No worries. Unexpected things are expected in flashing. Good luck.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Problem Solved
Technical service after getting off the phone to fix. they've changed the usb slot
mysticat said:
Hello,
After rooting and updating my I9003 to CM10.2-GalaxySL-JSS15Q-Alpha1 my phone will not charging (not charging usb too)
I want downgrade GingerBread 2.3.4 or something else because of solve for this problem. But pc and Odin cannot see my phone. How could i do downgrade without Odin.
Or any other solution. :crying:
P.S - Sorry for my bad english.
Click to expand...
Click to collapse
Try reinstalling your samsung drivers and try flashing using odin again! ).
Related
hi people....I have this weird problem...I originally flashed xxkpq,rooted, deoxed n ext4 partition...I then flashed the battery mod after which my phone started boot looping...so with help from bscraze(thanks dude) I flashed xxkpe...but when I start flashing xxkpq process stuck at setup connection...can't even flash xxkpe now..stuck at boot sign...help plz?? Wiped cache too
Maybe you should try another usb port or reinstall the drivers by reinstalling kies.
Sent from my GT-I9100 using xda premium
No go...still cannot flash a rom...even tried ddkp3...the flashing rom process stops at setting up connection..waits for a few mins...n then fails..
Have you tried both of my suggestion? Hmmm, try using another computer. Just make sure you install the drivers and your phone is in download mode.
Sent from my GT-I9100 using xda premium
Will try n inform u but had flashed xxkpe at same computer five mins before...
Thank you sir u helped a lot...changed usb port n finally flashed xxkpq...much indebted to u...
loneagl said:
Thank you sir u helped a lot...changed usb port n finally flashed xxkpq...much indebted to u...
Click to expand...
Click to collapse
No problem mate. I am also suffering from that problem sometimes either on sgsl or sgs2. Glad to help
Sent from my GT-I9100 using xda premium
Hello,
I know this problem it's nothing new. I try to explain my problem anyway because I couldn't find a solution yet.
I try to root my Samsung GT-S6802 but when I reboot the boot screen won't disappear. I find on XDA I have to use Odin, but it's hard to find the original rom, it's okay if I use a different one? Please suggest me a rom, because I'm pretty newbie at this.
Thanks.
R3flected said:
Hello,
I know this problem it's nothing new. I try to explain my problem anyway because I couldn't find a solution yet.
I try to root my Samsung GT-S6802 but when I reboot the boot screen won't disappear. I find on XDA I have to use Odin, but it's hard to find the original rom, it's okay if I use a different one? Please suggest me a rom, because I'm pretty newbie at this.
Thanks.
Click to expand...
Click to collapse
The only thing i found for this phone besides root ( http://forum.xda-developers.com/showthread.php?t=1759284 ) witch worked perfect for me, is this: http://forum.xda-developers.com/showthread.php?t=1832071 just that this is indian firmware
It sounds like you have a soft brick. Maybe you should try flashing your stock firmware back using flashtool. this will make your device normal again.
Keep in mind that new roms on first boot will take longer to boot up than usual. 10-15 minutes.
I have created a guide for the x8 about getting out of a soft brick HERE
Even though it isn't the same phone, try it.
Please thank me if you appreciate my effort to help.
Try to odin maybe helps.
i think is better to go to the store where you bought it and ask for a new phone or service couse it should be free.... beeing a new phone
Sent from my GT-S6802 using xda app-developers app
Try remove memory card and boot your phone i had this issue and it was the memory card causing my phone to reboot..
I hope this was helpfull
Sent from my GT-S6802 using xda app-developers app
First of all i would like to tell you that i am a newbie
I rooted my Samsung Galaxy S LCD (GT-I9003) Having infor as follows --
Firmware Version :2.3.6
Baseband Version:I9003DDLE1
Kernel Version:[email protected]#1
Build Number:GINGERBREAD.DDLF2
I followed the below guide
androidadvices-com/root-samsung-galaxy-sl-i9003-gingerbread-ddkp3-firmware/ (please replace '-' with dot)
Now after rooting my wifi is not working when i switch it on its shows error
To check whether my phone is properly rooted or not (as this my first experience) i used the app "root check basic" which says "Sorry,this device does not have proper root access" .
Ultimately in order to run my wifi back i reset my phone and wiped data but still the wifi is not working !
Any help would be much appreciated !
Thanks for Reading !
You can try create a fake network?
Sent from my GT-I9003 using xda premium
flash the kernel on this thread http://forum.xda-developers.com/showthread.php?t=1355675 with odin to root your phone and the wifi will work
just flash another kernel to get everything started again.. don't forget to wipe caches
Try the Xda Bam Kernel ...
It works awesome !!
Sent from my GT-I9003 using xda app-developers app
dude. flashing from normal GB to value pack firmware will have wifi error if you rooted with old cfroot kernel. as current only bam kernel is using the value pack source code. so bam kernel is the one.
Sent from my GT-I9003 using Tapatalk 2
nikhil18 said:
flash the kernel on this thread http://forum.xda-developers.com/showthread.php?t=1355675 with odin to root your phone and the wifi will work
Click to expand...
Click to collapse
Hey ! I tried flashing the kernel with what you told but still the wifi error problem is there.
Below are the info :
PDA:I9003DDLF2
PHONE:I9003DDLE1
CSC:I9003ODDLF2
I am thinking to unroot my phone back ,so if you can provide me some urooting guide i would be very much thankful to you !
as i think i was happy before when i was unrooted
k.kathuria said:
Hey ! I tried flashing the kernel with what you told but still the wifi error problem is there.
Below are the info :
PDA:I9003DDLF2
PHONE:I9003DDLE1
CSC:I9003ODDLF2
I am thinking to unroot my phone back ,so if you can provide me some urooting guide i would be very much thankful to you !
as i think i was happy before when i was unrooted
Click to expand...
Click to collapse
I suggest you completely gi back to stock flash another firmware from sammobile.com.. flashing another fw is good as unrooting.. do not forget to wipe caches!
Sent from my GT-I9300 using xda premium
Problem is now solved
saywhatt said:
I suggest you completely gi back to stock flash another firmware from sammobile.com.. flashing another fw is good as unrooting.. do not forget to wipe caches!
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Hey thanks i flashed again with the firmware on which i was before rooting .It solved my problem and i am now again unrooted
Thanks everyone for helping me out !:good:
Just have a clean reset from xxkpe then ddlf2 then cf-root .....worked for me.
Sent from my GT-I9003 using xda app-developers app
Help
k.kathuria said:
Hey thanks i flashed again with the firmware on which i was before rooting .It solved my problem and i am now again unrooted
Thanks everyone for helping me out !:good:
Click to expand...
Click to collapse
Can u please help me regarding flashing with normal firmware. i am also having the same problem with wifi...
My older version was ddlf2..
remember to use proper cf root file along to the rom flashed by you otherwise such errors are caused
phew my wifi got fu*ked up too sh*t i guess was too excited too root. lol. going to try bam kernel now.. hope it works
Im in India, my tab was running ICS stock, so I thought I want something better, rooted it, using a cwm zip which opens the recovery inside recovery then bored, flashed cm10, but it didnt boot, I thought Ill factory reset I couldnt it fails...I flashed stock JB using odin P6200XXMC3_P6200OXAMC3_ATO but it didnt boot, so I flashed ICS using odin, it didnt boot, I did a factory reset again it failed im stuck what to do please help me its really urgent :'( :'( :crying: :crying:
Im even knew to samsung I came from HTC background odin is very knew please help me people are after my life for this issue ive created :"(
someone said I may have messed partition table but I cant find PIT file for the same?? and does it matter I flash other country odin??
please help me unbrick
Do i need pit file? If yes, please Link I couldn't find it
Sent from my HTC Desire X using xda premium
And I didn't charge it to 80% I dif it on 20% does that matter ?
Sent from my HTC Desire X using xda premium
ICUDeadNow said:
And I didn't charge it to 80% I dif it on 20% does that matter ?
Sent from my HTC Desire X using xda premium
Click to expand...
Click to collapse
First, make sure you have the correct Model. Is your tab a P6200 or P6210? Then get a full ROM of Samsung OEM Firmware with the PIT file and flash with Odin and makes sure to check use PIT file. When going between major revisions like ICS to JB the partitions sometimes change . Also hopefully you didn;t do a system reset (clear) from stock ICS, because there was a potentially fatal brick bug in that version. It's ok to use other country ROMs assuming on the P6200 the radio section works for your cell provider.
DigitalMD said:
First, make sure you have the correct Model. Is your tab a P6200 or P6210? Then get a full ROM of Samsung OEM Firmware with the PIT file and flash with Odin and makes sure to check use PIT file. When going between major revisions like ICS to JB the partitions sometimes change . Also hopefully you didn;t do a system reset (clear) from stock ICS, because there was a potentially fatal brick bug in that version. It's ok to use other country ROMs assuming on the P6200 the radio section works for your cell provider.
Click to expand...
Click to collapse
Yes i did factory reset in ICS recovery, which said failed to mount data, and phone never worked, I have p6200 as it says on the back, it is 16gb with 3G.
Now for JB i need the odin file and pit together? Please give me the correct pit file i cant find it anywhere..
Sent from my HTC Desire X using xda app-developers app
Its a bummer
ICUDeadNow said:
Im in India, my tab was running ICS stock, so I thought I want something better, rooted it, using a cwm zip which opens the recovery inside recovery then bored, flashed cm10, but it didnt boot, I thought Ill factory reset I couldnt it fails...I flashed stock JB using odin P6200XXMC3_P6200OXAMC3_ATO but it didnt boot, so I flashed ICS using odin, it didnt boot, I did a factory reset again it failed im stuck what to do please help me its really urgent :'( :'( :crying: :crying:
Im even knew to samsung I came from HTC background odin is very knew please help me people are after my life for this issue ive created :"(
Click to expand...
Click to collapse
Sorry to hear this bad news ,,I think ur tab is dead cause while on stock ics u should nt have to wipe factory reset...Its a bummer..U have to replace MOTHERBOARD or BELIEVE ON JTAG REPAIR>> and i also faced this kind of pblm past 4months back i got permanent brick and i replaced motherboard and its workd normal..
katarusiva said:
Sorry to hear this bad news ,,I think ur tab is dead cause while on stock ics u should nt have to wipe factory reset...Its a bummer..U have to replace MOTHERBOARD or BELIEVE ON JTAG REPAIR>> and i also faced this kind of pblm past 4months back i got permanent brick and i replaced motherboard and its workd normal..
Click to expand...
Click to collapse
Will service center people fix it ? Um I'm not in warranty I'm ****ed right ?
Sent from my HTC Desire X using xda premium
ICUDeadNow said:
Will service center people fix it ? Um I'm not in warranty I'm ****ed right ?
Sent from my HTC Desire X using xda premium
Click to expand...
Click to collapse
Look here. find a ROM file with a .pit and use it.
http://samsung-updates.com/gt-p6200-galaxy-tab-7-7/
you can also try KIES Emergency firmware recovery function
Credit
ICUDeadNow said:
Will service center people fix it ? Um I'm not in warranty I'm ****ed right ?
Sent from my HTC Desire X using xda premium
Click to expand...
Click to collapse
Definitely service center members shall fix..Dont worry,,, but u dont have a warranty(EMBARASSING tHING) ..I think our tab is based on SMDK4210 Based chipset,,So u will charge around rs:\8000
---------- Post added at 10:25 AM ---------- Previous post was at 10:18 AM ----------
DigitalMD said:
Look here. find a ROM file with a .pit and use it.
http://samsung-updates.com/gt-p6200-galaxy-tab-7-7/
you can also try KIES Emergency firmware recovery function
Click to expand...
Click to collapse
ALthough we can do the Kies emergency processs,,,But wiping data / factory reset on ICS causes home brew or malfunctioned......Now ur tab is completely dead.It wont work anymore untill changing the motherboard Or JTAG REpair...
---------- Post added at 10:38 AM ---------- Previous post was at 10:25 AM ----------
ICUDeadNow said:
Yes i did factory reset in ICS recovery, which said failed to mount data, and phone never worked, I have p6200 as it says on the back, it is 16gb with 3G.
Now for JB i need the odin file and pit together? Please give me the correct pit file i cant find it anywhere..
Sent from my HTC Desire X using xda app-developers app
Click to expand...
Click to collapse
http://www.mediafire.com/download/k214zeqp9xx6c65/p6200.rar
If it will still charge and boot into download mode, it may not be bricked, it might be that the partitions are just messed up. Worth a try to re-partition with a .pit if so.
DigitalMD said:
If it will still charge and boot into download mode, it may not be bricked, it might be that the partitions are just messed up. Worth a try to re-partition with a .pit if so.
Click to expand...
Click to collapse
It goes to Download mode, charges and all, but even when I flashed pit(I got from some thread in Galaxy note forum for all Samsung devices) It still doesn't boot after pit
Sent from my HTC Desire X using xda premium
ICUDeadNow said:
Yes i did factory reset in ICS recovery, which said failed to mount data, and phone never worked, I have p6200 as it says on the back, it is 16gb with 3G.
Now for JB i need the odin file and pit together? Please give me the correct pit file i cant find it anywhere..
Sent from my HTC Desire X using xda app-developers app
Click to expand...
Click to collapse
You should have wipe using CWM.. not stock recovery... wiping from CWM is safe.. but now ur tab is dead.. im sorry
Sent from my GT-P6200 using XDA Premium HD app
Isn't Samsung responsible for this buggy nature of their os ? Even though I'm not in warranty I am going to case againt them in consumer court, they make bugs and land us in trouble
Sent from my HTC Desire X using xda premium
Solution....
Relax...if you've searched around....the same thing happened to me and my 6200L. Everything failed except HC....until a fellow member told me to try something and it works like a charm.
For some reason, my 6200L, and many out there, arent too friendly with ODIN, i had tried all sorts of firmwares, PIT and all, but the solution was simple and easy:
Mobile ODIN.
In a memory card, copy the firmware you want, in my case I put the latest 4.1.2 for the 6200L. I flashed HC using ODIN, and then downloaded Mobile ODIN. From there I selected the image for the 4.1.2, and voila. Problem solved.
Hope this helps,
Paul
What is Hc?
Sent from my HTC Desire X using xda premium
Oh honey comb
Sent from my HTC Desire X using xda premium
Android 3.2 = HC
Can you link me to HC firmware to flash and is the pit above compatible?
Hello everyone, yesterday i tried to downgrade from JB to stock ICS "I535VRALF2_I535VZWALF2_VZW", fallowing a guide to unlock this model for use it in GSM Networks, and it worked, but after that the camera app doesn't work anymore. When i open it i have screen in black and the phone gets freeze. Any idea on how to fix this???? Please i really need your help. :crying:
Greetings.
rosendohl13 said:
Hello everyone, yesterday i tried to downgrade from JB to stock ICS "I535VRALF2_I535VZWALF2_VZW", fallowing a guide to unlock this model
for use it in GSM Networks, and it worked, but after that the camera app doesn't work anymore. When i open it i have screen in black and the phone gets freeze. Any idea on how to fix this???? Please i really need your help. :crying:
Greetings.
Click to expand...
Click to collapse
Sounds like the kernel you are using isn't compatible with your radios.
Sent from my SCH-I535 using xda app-developers app
tburns said:
Sounds like the kernel you are using isn't compatible with your radios.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
But how can it be?? i did the downgrade to stock using odin, and after that i made a factory reset. When i make a downgrade it doesn't change the kernel too?? How can i fix this?? Please help me....
Do i need to flash anything else?? Please help me.....
Does anyone had the same problem and fix it?? Please, i already did a factory reset and still nothing. I don't understand why flashing a stock firmware with odin can have this result, i mean is a stock firmware made it for this phone. Any ideas please.....????